On a KVM x86_64 host which supports invariant TSC this function can be
used to detect the TSC frequency and the availability of TSC scaling.
The magic MSR numbers required to check if VMX scaling is supported on
the host are documented in Volume 3 of the Intel® 64 and IA-32
Architectures Software Developer’s Manual.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1426162
Turns out, some aarch64 systems have SMBIOS info. That means we
can use dmidecode to fetch some information. If that fails, fall
back to the old behaviour.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
There's nothing x86 specific about this function. Rename the
function so that it has DMI suffix which enables it to be reused
on different arches (as using X86 from say ARM would look
suspicious).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Due to the way that our virObjectUnref() is written it's not
possible that a NULL is passed into *Dispose() function. However,
some functions check for that regardless.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
If an FD is passed into a child using:
virCommandPassFD(cmd, fd, VIR_COMMAND_PASS_FD_CLOSE_PARENT);
then the parent should refrain from touching @fd thereafter. This
is even documented in virCommandPassFD() comment. The reason is
that either at virCommandRun()/virCommandRunAsync() or
virCommandFree() time the @fd will be closed. Closing it earlier,
e.g. right after virCommandPassFD() call might result in
undesired results. Another thread might open a file and receive
the same FD which is then unexpectedly closed by virCommandFree()
or virCommandRun().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1710575
It may happen that the system where libvirt is built at doesn't
have udevadm binary but the one where it runs does have it.
If we change how udevadm is run in virWaitForDevices() then we
can safely pass a default value in m4 macro.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The udevsettle binary is no longer used anywhere as it was
replaced by 'udevadm settle'. There's no reason for us to even
check for it in configure.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It's not true that there is a backup loop. There isn't. Drop this
part of the comment to not confuse anybody.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The idea of virCommand* APIs is that a possible error that
occurred while constructing cmd line is kept in virCommand
struct. If that's the case all subsequent calls to virCommand*()
are NO-OPs or they return an error. Well,
virCommandPassFDGetFDIndex() is not honoring that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The qsort element is a pointer of virResctrlMonitorStats, and
the comparing function's arguments have a type of pointer of
virResctrlMonitorStatsPtr.
Signed-off-by: Huaqiang <huaqiang.wang@intel.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If no board was detected then VIR_REALLOC_N() done at the end of
the function will actually free the memory (because nborads ==
0), but @boards will be set to a non-NULL pointer. This makes it
unnecessary harder for a caller to see if any board was detected.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Currently, the way virBufferFreeAndReset() works is it relies on
virBufferContentAndReset() to fetch the buffer content which is
then freed. This works as long as there is no bug in virBuffer*
implementation (not true apparently). Explicitly call free() over
buffer content.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The @error member can contain a positive value (errno) or a
negative value (-1) to denote a usage error. It doesn't make
much sense to store it as unsigned then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
If an error occurs in a virBuffer* API the idea is to free the
content immediately and set @error member used in error reporting
later. Well, this is not what how virBufferAddBuffer works.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This commit is similar with 692400f4. It fixes an uninitialized
variable to avoid garbage value. This case, returns 0 jiffies if an
error occurs with virNetDevBridgeGet.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
In cases when the hash function for a name collides with other entry
already in the hash we prepend to the bucket. This creates a 'stack
effect' on the buckets if we then iterate through the hash. Normally
this is not a problem, but in tests we want deterministic results.
Since it does not matter where we add the entry and it's usually more
probable that a different entry will be accessed next change it to
append to the end of the bucket. Luckily we already iterate throught the
bucket once thus we can easily find the last entry and just connect the
new entry after it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
virCgroup struct is always defined and the free function is not calling
anything that would require OS supporting cgroups.
This fixes an issue if we try to start a VM with QEMU binary that
doesn't support QXL. The start operation will fail in
qemuProcessStartValidateVideo() which will set correct error message,
but later in one of the cleanup paths we will call
qemuDomainObjPrivateDataClear() which always calls virCgroupFree()
and that will fail on OS that doesn't support cgroups and it will
set a new error which will be eventually reported to user.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
If a bitmap of a shorter length than the data buffer is passed to
virBitmapToDataBuf, it will read off the end of the bitmap and copy junk
into the returned buffer. Add a check to only copy the length of the
bitmap to the buffer.
The problem can be observed after setting a vcpu affinity using the vcpupin
command on a system with a large number of cores:
# virsh vcpupin example_domain 0 0
# virsh vcpupin example_domain 0
VCPU CPU Affinity
---------------------------
0 0,192,197-198,202
Signed-off-by: John Allen <john.allen@amd.com>
hostdevs have a link back to the original network device. This is fairly
generic accepting any type of device, however, we don't intend to make
use of this approach in future. It can thus be specialized to network
devices.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When virDBusMessageRead() and virDBusMessageDecode were first added in
commit 834c9c94, they were identical except that virDBusMessageRead()
would unref the message after decoding it.
This difference was eliminated later in commit dc7f3ffc after it
became apparent that unref-ing the message so soon was never the right
thing to do. The two identical functions remained though, with the
tests and virDBus library itself calling the Decode variant, and all
other users calling the Read variant.
This patch eliminates the duplication, switching all users to
virDBusMessageDecode (and moving the nice API documentation comment
from the Read function up to the Decode function).
Signed-off-by: Laine Stump <laine@laine.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Spotted by Lintian (manpage-has-bad-whatis-entry tag).
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Model specific registers are a thing only on x86. Also, the
/dev/cpu/0/msr path exists only on Linux and the fallback
mechanism (asking KVM) exists on Linux and FreeBSD only.
Therefore, move the function within #ifdef that checks all
aforementioned constraints and provide a dummy stub for all
other cases.
This fixes the build on my arm box, mingw-* builds, etc.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The new virHostCPUGetMSR internal API will try to read the MSR from
/dev/cpu/0/msr and if it is not possible (the device does not exist or
libvirt is running unprivileged), it will fallback to asking KVM for the
MSR using KVM_GET_MSRS ioctl.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Vim has trouble figuring out the filetype automatically because
the name doesn't follow existing conventions; annotations like
the ones we already have in Makefile.ci help it out.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Firstly, virCommandRun() does report an error on failure (which
in most cases is more accurate than what we overwrite it with).
Secondly, usually errno is not set (or gets overwritten in the
cleanup code) which makes virReportSystemError() report useless
error messages. Drop all virReportSystemError() calls in cases
like this (I've found three occurrences).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The 'bandwidths' variable is allocated using VIR_RESIZE_N so it has to
be freed as well.
==118315== 8 bytes in 1 blocks are definitely lost in loss record 299 of 2,401
==118315== at 0x4C29DAD: malloc (vg_replace_malloc.c:308)
==118315== by 0x4C2C100: realloc (vg_replace_malloc.c:836)
==118315== by 0x52C3FAF: virReallocN (viralloc.c:245)
==118315== by 0x52C4079: virExpandN (viralloc.c:294)
==118315== by 0x532BBA8: virResctrlAllocParseProcessMemoryBandwidth (virresctrl.c:1156)
==118315== by 0x532BBA8: virResctrlAllocParseMemoryBandwidthLine (virresctrl.c:1211)
==118315== by 0x532BBA8: virResctrlAllocParse (virresctrl.c:1414)
==118315== by 0x532BBA8: virResctrlAllocGetGroup (virresctrl.c:1446)
==118315== by 0x532C11D: virResctrlAllocGetDefault (virresctrl.c:1464)
==118315== by 0x532D15E: virResctrlAllocAssign (virresctrl.c:1923)
==118315== by 0x532D15E: virResctrlAllocCreate (virresctrl.c:2042)
==118315== by 0x31E1ABEE: qemuProcessResctrlCreate (qemu_process.c:2596)
==118315== by 0x31E1ABEE: qemuProcessLaunch (qemu_process.c:6444)
==118315== by 0x31E1E341: qemuProcessStart (qemu_process.c:6721)
==118315== by 0x31E81315: qemuDomainObjStart.constprop.50 (qemu_driver.c:7288)
==118315== by 0x31E81A65: qemuDomainCreateWithFlags (qemu_driver.c:7341)
==118315== by 0x54DDB4B: virDomainCreate (libvirt-domain.c:6534)
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Standardize on putting the _LAST enum value on the second line
of VIR_ENUM_IMPL invocations. Later patches that add string labels
to VIR_ENUM_IMPL will push most of these to the second line anyways,
so this saves some noise.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
The function open-codes addition into an array. Use the helper instead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This reverts commit a5e1602090.
Getting rid of unistd.h from our headers will require more work than
just fixing the broken mingw build. Revert it until I have a more
complete proposal.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
util/virutil.h bogously included unistd.h. Drop it and replace it by
including it directly where needed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virutil.(c|h) is a very gross collection of random code. Remove the enum
handlers from there so we can limit the scope where virtutil.h is used.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'viralloc.h' does not provide any type or macro which would be necessary
in headers. Prevent leakage of the inclusion.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Keeping them with viralloc.h forcibly pulls in the other stuff from
viralloc.h into other header files. This in turn creates a mess
as more and more headers pull in the 'viral' header file.
If we want to make 'viralloc.h' omnipresent we should pick a different
approach.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This commit fixes an unitialized variable to avoid garbage value
when virNetDevBridgeGet method returns error. When, that method fails
before initialize 'val' variable, it can cause problems related to
that.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This helper has solely to do with virObjects. Move it together with
other virObject stuff.
This also avoids the potential problem where VIR_AUTOUNREF uses
virObjectAutoUnref which is defined in virobject.h.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This helper returns the default hugetlbfs mount point from given
array of mount points.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since commit 66460e3 dropped support for YAJL 1, we no longer need
these.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Now that we do not need to cater to YAJL 1, move the check for the
return value of yajl_gen_alloc earlier, so that we can assume it
was successful in later code.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Now that we require YAJL2, drop the code dealing with YAJL 1.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We have tests that validate the XML formatter. Additionally almost every
guide tells users to disable JSON logging. Drop logging of output string
in virJSONValueToString.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
The last step of the conversion involves copying of the generated JSON
into a separate string. We can use a virBuffer to do this as this will
also allow to subsequently use the buffer when we actually need to do
some other formatting of the string.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
Use size_t for all sizes. The '*' modifier unfortunately does require an
int so a temporary variable is necessary in the tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
This was meant to stop abusing the members directly, but we don't do
this for other internal structs. Additionally this did not stop the
test from touching the members. Remove the header obscurization.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
VIR_AUTODISPOSE_STR is similar to VIR_AUTOFREE(char *) but uses
virDispose for clearing of the stored string.
This patch also refactors VIR_DISPOSE to use the new helper which is
used for the new macro.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
commit edaf13565 modified the stats retrieval for OVS interfaces to
not fail when one of the fields was unrecognized by the ovs-vsctl
command, but ovs-vsctl was still returning an error, and libvirt was
cluttering the logs with these inconsequential error messages.
This patch modifies the GET_STAT macro to add "--if-exists" to the
ovs-vsctl command, which causes it to return an empty string (and exit
with success) if the requested statistic isn't in its database, thus
eliminating the ugly error messages from the log.
Resolves: https://bugzilla.redhat.com/1683175
Signed-off-by: Laine Stump <laine@laine.org>
Prepare for introducing a bunch of new public APIs related to
backup checkpoints by first introducing a new internal type
and errors associated with that type. Checkpoints are modeled
heavily after virDomainSnapshotPtr (both represent a point in
time of the guest), although a snapshot exists with the intent
of rolling back to that state, while a checkpoint exists to
make it possible to create an incremental backup at a later
time.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We can use our VIR_AUTOPTR machinery also for libxml2's xmlDoc and
xmlXPathContext.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
During startup libvirtd creates top level chains for both ipv4
and ipv6 protocols. If this fails for any reason then startup
of virtual networks is blocked.
The default virtual network, however, only requires use of ipv4
and some servers have ipv6 disabled so it is expected that ipv6
chain creation will fail. There could equally be servers with
no ipv4, only ipv6.
This patch thus makes error reporting a little more fine grained
so that it works more sensibly when either ipv4 or ipv6 is
disabled on the server. Only the protocols that are actually
used by the virtual network have errors reported.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Checking that the derived class is larger than the requested parent
class saves us from some obvious mistakes, but as written, it does not
catch all the cases; in particular, it is easy to forget to update a
VIR_CLASS_NEW when changing the 'parent' member from virObject to
virObjectLockabale, but where the size checks don't catch that. Add a
parameter for one more layer of sanity checking.
It would be cool if we could get gcc to stringize typeof(parent) into
the string name of that type, so that we could confirm that the
precise parent class is in use rather than just a struct that happens
to have the same size as the parent class. But sizeof checks are
better than nothing.
Note that I did NOT change the fact that we require derived classes to
be larger (as the difference in size makes it easy to tell classes
apart), which means that even if a derived class has no functionality
to add (but rather exists for compiler-enforced type-safety), it must
still include a dummy member. But I did fix the wording of the error
message to match the code.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Some modules/libraries within QEMU could make use of the XDG_ vars when
writing their data to the disk. Define the most common XDG variables
and point them to the specific driver's libDir, i.e.
XDG_CACHE_HOME -> /var/lib/libvirt/<driver>/.cache
XDG_DATA_HOME -> /var/lib/libvirt/<driver>/.local/share
XDG_CONFIG_HOME -> /var/lib/libvirt/<driver>/.config
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
I had to inspect the code to learn whether a final virObjectUnref()
calls ALL dispose callbacks in child-to-parent order (akin to C++
destructors), or whether I manually had to call a parent-class dispose
when writing a child class dispose method. The answer is the
former. (Thankfully, since VIR_FREE wipes out pointers for safety,
even if I had guessed wrong, I probably would not have tripped over a
double-free fault when the parent dispose ran for the second time). I
also had to read the code to learn if a dispose method was even
mandatory (it is not, although getting NULL through VIR_CLASS_NEW
requires a macro). While at it, the VIR_CLASS_NEW macro requires that
the virObject component at offset 0 be reached through the name
'parent', not 'object'.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
According to the official documentation for autoconf[1], the
correct names for these variables are abs_top_{src,build}dir
rather than abs_top{src,build}dir; in fact, we're already
using the correct names in various places, so let's just make
everything nice and consistent.
[1] https://www.gnu.org/software/autoconf/manual/autoconf-2.69/html_node/Preset-Output-Variables.html
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
This helper performs a conversion from a "yes|no" string to a
corresponding boolean. This allows us to drop several repetitive
if-then-else string->bool conversion blocks.
Signed-off-by: Shotaro Gotanda <g.sho1500@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Similarly to CAT, when you set some values in an group, remove the group and
recreate it, the previous values will be kept there. In order to not get values
from a previous setting (a previous VM, for example), we need to set them to
sensible defaults. The same way we do that for CAT, just set the same values as
the default group has.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
For CAT we calculate unallocated parts of the cache, however with MBA this does
not make sense as the purpose of that is to limit the bandwidth and the setting
is only proportional relative to bandwidth settings for other groups.
This means it makes sense to set the values to 100% even if there are other
groups with some allocations and that we don't need to find the available
(unallocated) bandwidth in all the groups.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Only PCI devices have '/sys/class/net/<ifname>/device/resource' so we
need to skip this check for all other network devices.
Without this patch and RDMA enabled libvirt will not detect any network
device that doesn't have the path above which includes 'lo', 'virbr',
'tun', etc.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1639258
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
We can use STRNEQ() instead of STRNEQLEN() since we're only
interested in the trailing part of the string and we've
already verified that the length of file, name and suffix
are those we expect.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
It's a predicate, so bool is the appropriate return type.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
While this function is not, strictly speaking, a predicate,
it still mostly behaves like one as evidenced by the vast
majority of its callers, so using bool rather than int as
the return type makes sense.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
It's a predicate, so bool is the appropriate return type.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
This is the case-sensitive counterpart of the existing
virStringHasCaseSuffix() function.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Despite its name, this is really just a general-purpose string
manipulation function, so it should be moved to the virstring
module and renamed accordingly.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Despite its name, this is really just a general-purpose string
manipulation function, so it should be moved to the virstring
module and renamed accordingly.
A few trivial whitespace changes are squashed in.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Despite its name, this is really just a general-purpose string
manipulation function, so it should be moved to the virstring
module and renamed accordingly.
In addition to the obvious s/File/String/, also tweak the name
to make it clear that the presence of the suffix is verified
using case-insensitive comparison.
A few trivial whitespace changes are squashed in.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
In these cases the check that is removed has been done a few
lines above already (as can even be seen in the context). Drop
them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The function does not transfer errors from 'attrBuf' and 'childBuf'
arguments into 'buf', but rather reports them right away, thus we need
to make sure that it's always checked.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1658504
This function is called when a domain is starting up (in qemu
driver that is when qemu cmd line is generated). It is used to
translate <disk type='volume'/> to something usable by filling in
virStorageSource (e.g. fetching disk path, or some connection URI
for a network FS). But some of these info are not stored in
status XML and thus the function is called on
qemuProcessReconnect too to reconstruct runtime data. But this
poses a problem because after the first run the mode is set to
'direct', but in the second run this triggers a failure because
mode is valid only for 'iscsi' volumes and not 'iscsi-direct'
ones.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Quite a few parts modify the XPath context current node to shift the
scope and allow easier queries. This also means that the node needs
to be restored afterwards.
Introduce a macro based on 'VIR_AUTOCLEAN' which adds a local structure
on the stack remembering the original node along with a function which
will make sure that the node is reset when the local structure leaves
scope.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The helper function is used by the VIR_AUTOUNREF macro. Prior art is to
clear the pointer even if the variable goes out of scope.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We'd free only the first element of the vector leaking the rest.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
We don't need it as there's a separate macro for auto-freeing of string
lists.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Use of VIR_AUTOPTR and virString is confusing as it's a list and not a
single pointer. Replace it by VIR_AUTOSTRINGLIST as string lists are
basically the only sane NULL-terminated list we can have.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Similar to VIR_AUTOPTR, VIR_AUTOSTRINGLIST defines a list of strings
which will be freed if the pointer is leaving scope.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Let's make use of the auto __cleanup capabilities cleaning up any
now unnecessary goto paths.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
For consistency with other error messages, and the fact that
the object is always called a virDomainSnapshot rather than
a mere virSnapshot, include the word "domain" in the error
message.
Suggested-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Added GPFS as shared file system recognized during live migration
security checks.
GPFS is 'IBM General Parallel File System' also called
'IBM Spectrum Scale'
BUG: https://bugzilla.redhat.com/show_bug.cgi?id=1679528
Signed-off-by: Diego Michelotto <diego.michelotto@cnaf.infn.it>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
libvirt_iohelper is used internally by the virFileWrapperFd APIs;
more specifically, in the QEMU driver we have the doCoreDump() and
qemuDomainSaveMemory() helper functions as users, and those in turn
end up being called by the implementation of several driver APIs.
By calling virReportError() if libvirt_iohelper has failed, we
overwrite whatever generic error message QEMU might have raised
with the more useful one generated by the helper program.
After this commit, the user will be able to see the error directly
instead of having to dig in the journal or libvirtd log.
https://bugzilla.redhat.com/show_bug.cgi?id=1578741
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virFileWrapperFdFree(), like all free functions, is supposed
to only release allocated resources, so error reporting is
better suited for virFileWrapperFdClose().
This reverts commit b0c3e93180.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We'll want to use this function in the cleanup path soon,
and in order to be able to do that we need to make sure we
can call it multiple times on the same virFileWrapperFd
without side effects.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virBuffer is almost always stack-allocated, but requires freeing of the
internals on error. Introduce a VIR_AUTOCLEAN function to deal with
this.
Along with the addition add a test which would leak the buffer contents
if it weren't autocleaned.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The new utility macros are useful for variables we put on the stack but
require some cleanup. The most prominent of those is virBuffer which is
used almost exclusively in that way.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The conversion to VIR_AUTOFREE of 'escapeList' introduced memory leak of
the copied item to be escaped:
==17517== 2 bytes in 1 blocks are definitely lost in loss record 1 of 32
==17517== at 0x483880B: malloc (vg_replace_malloc.c:309)
==17517== by 0x54D666D: strdup (in /usr/lib64/libc-2.28.so)
==17517== by 0x497663E: virStrdup (virstring.c:956)
==17517== by 0x497663E: virStrdup (virstring.c:945)
==17517== by 0x48F8853: virBufferEscapeN (virbuffer.c:707)
==17517== by 0x403C9D: testBufEscapeN (virbuftest.c:383)
==17517== by 0x405FA8: virTestRun (testutils.c:174)
==17517== by 0x403A70: mymain (virbuftest.c:517)
==17517== by 0x406BC9: virTestMain (testutils.c:1097)
==17517== by 0x5470412: (below main) (in /usr/lib64/libc-2.28.so)
[...] (all other have same backtrace as it happens in a loop)
Fix it by reverting all the VIR_AUTO nonsense in this function as there
is exactly one place where it's handled.
This effectively reverts commits:
d0a92a037196fbf6df90d261ed2fb1
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
'virBufferFreeAndReset' does not free the top level structure itself.
Additionally we almost exclusively use stack'd buffers rather than
pointers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This fixes a bug that has been present since the original version of
the function was pushed in commit 1ab80f3 on Nov. 26 2010 (by me). The
virSocketAddr::len was not being set.
Apparently until now we were always calling
virSocketAddrPrefixToNetmask with virSocketAddr object that was
already (coincidentally) initialized for the proper address family,
but the bug became apparent when trying to use it to fill in an
otherwise uninitialized object.
Signed-off-by: Laine Stump <laine@laine.org>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The iohelper is an internal program that's only supposed to
be called by libvirt, and whatever output it might produce
will ultimately be passed to virReportError() or similar.
Since we do not want strings passed to those functions to
contain newlines, we can simply not output them in the first
place.
This is what happens in pretty much all cases already, but
in a couple instances newlines have managed to slip in.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
The newline was pretty arbitrary, and we're better off
without it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The memory allocated by VIR_REALLOC_N() is uninitialized,
which means it's not possible to figure out whether any
output was produced at all after the fact.
Since we don't care about the previous contents of buffers,
if any, use VIR_FREE() followed by VIR_ALLOC_N() instead.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Now that virStorageSource is a subclass of virObject we can use
virObjectUnref and remove virStorageSourceFree which was a thin wrapper.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Since virStorageSource is now a subclass of virObject, we can use
VIR_AUTOUNREF instead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Add helper for utilizing __attribute__(cleanup())) for unref-ing
instances of sublasses of virObject.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
To allow tracking a single virStorageSource in multiple structures
without extra hassle allow refcounting by turining it into an object.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Add virStorageSourceNew and refactor places allocating that structure to
use the helper.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Another misleadingly named macro.
Deprecate in favor of NULLSTR_STAR.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
commit 3bba4825 added the new function virFirewallDInterfaceSetZone()
which calledsends virDBUSCallMethod a DBusMessage** for the reply
message, but doesn't use the reply, and also doesn't free it. Since
this arg is allowed to be NULL, this patch simply sets it to NULL so
we don't have to deal with it.
Signed-off-by: Laine Stump <laine@laine.org>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Let's make use of the auto __cleanup capabilities cleaning up any
now unnecessary goto paths.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If we find multiple "id=" strings during processing, then we need
to force an error since we cannot have multiple <auth>'s defined
for a single source volume.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Modify code to use the VIR_AUTOCLOSE logic cleaning up any
now unnecessary goto paths.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
To prepare for subsequent change to use VIR_AUTOPTR logic rename
the @ret to @def.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
To prepare for subsequent change to use VIR_AUTOPTR logic rename
the @ret to @def.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
To prepare for subsequent change to use VIR_AUTOPTR logic rename
the @ret to @def.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
To prepare for subsequent change to use VIR_AUTOPTR logic rename
the @ret to @def.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
To prepare for subsequent change to use VIR_AUTOPTR logic rename
the @ret to @def.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Let's make use of the auto __cleanup capabilities cleaning up any
now unnecessary goto paths.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rather than open coding virStorageFileGetRelativeBackingPath
and virStorageFileGetMetadataRecurse, let's make use of the
VIR_STEAL_PTR macro.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Let's make use of the auto __cleanup capabilities cleaning up any
now unnecessary goto paths.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Let's make use of the auto __cleanup capabilities cleaning up any
now unnecessary goto paths.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Let's make use of the auto __cleanup capabilities cleaning up any
now unnecessary goto paths.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rather than having an error path, let's rework the code to allocate
and fill into an @authdef variable and then steal that into @ret when
we are successful leaving just a cleanup: path.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For consistency, let's use the semicolon for all definitions.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
So far the virInitctlSetRunLevel() is fully automatic. It finds
the correct fifo to use to talk to the init and it will set the
desired runlevel. Well, callers (so far there is just one) will
need to inspect the fifo a bit just before the runlevel is set.
Therefore, expose the internal list of fifos and also allow
caller to explicitly use one.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Prior to rewrite of cgroup code we only had one backend to try.
After the rewrite the virCgroupBackendGetAll() returns both
backends (for v1 and v2). However, not both have to really be
present on the system which results in killRecursive callback
failing which in turn might mean we won't try the other backend.
At the same time, this function reports no error as it should.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Missing semicolon at the end of macros can confuse some analyzers
(like cppcheck <filename>). VIR_ONCE_GLOBAL_INIT is almost
exclusively called without an ending semicolon, but let's
standardize on using one like the other macros.
Add a dummy struct definition at the end of the macro, so
the compiler will require callers to add a semicolon.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Missing semicolon at the end of macros can confuse some analyzers
(like cppcheck <filename>), and we have a mix of semicolon and
non-semicolon usage through the code. Let's standardize on using
a semicolon for VIR_LOG_INIT calls.
Drop the semicolon from the final statement of the macro, so
the compiler will require callers to add a semicolon.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Missing semicolon at the end of macros can confuse some analyzers
(like cppcheck <filename>), and we have a mix of semicolon and
non-semicolon usage through the code. Let's standardize on using
a semicolon for VIR_ENUM_IMPL calls.
Move the verify() statement to the end of the macro and drop
the semicolon, so the compiler will require callers to add a
semicolon.
While we are touching these call sites, standardize on putting
the closing parenth on its own line, as discussed here:
https://www.redhat.com/archives/libvir-list/2019-January/msg00750.html
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Missing semicolon at the end of macros can confuse some analyzers
(like cppcheck <filename>), and we have a mix of semicolon and
non-semicolon usage through the code. Let's standardize on using
a semicolon for VIR_ENUM_DECL calls.
Drop the semicolon from the final statement of the macro, so
the compiler will require callers to add a semicolon.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Just before pushing the series containing commit 3bba4825 I had added
a "return true" to the top of virFirewallDZoneExists() to measure the
impact of calling that function once per network during startup. I
found that the effect was minimal, but forgot to remove the "return
true" before pushing. This unfortunately causes a failure to start
networks on systems that have a firewalld version that doesn't support
our libvirt zone file (i.e. pretty much everyone).
This patch removes the unintended line.
Signed-off-by: Laine Stump <laine@laine.org>
virFirewallDGetBackend() reports whether firewalld is currently using
an iptables or an nftables backend.
virFirewallDGetVersion() learns the version of the firewalld running
on this system and returns it as 1000000*major + 1000*minor + micro.
virFirewallDGetZones() gets a list of all currently active firewalld
zones.
virFirewallDInterfaceSetZone() sets the firewalld zone of the given
interface.
virFirewallDZoneExists() can be used to learn whether or not a
particular zone is present and active in firewalld.
Signed-off-by: Laine Stump <laine@laine.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
In preparation for adding several other firewalld-specific functions,
separate the code that's unique to firewalld from the more-generic
"firewall" file.
Signed-off-by: Laine Stump <laine@laine.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The vHBA/NPIV LUNs created via the udev processing of the
VPORT_CREATE command end up using the same serial value
as seen/generated by the /lib/udev/scsi_id as returned
during virStorageFileGetSCSIKey. Therefore, in order to
generate a unique enough key to be used when adding the
LUN as a volume during virStoragePoolObjAddVol a more
unique key needs to be generated for an NPIV volume.
The problem is illustrated by the following example, where
scsi_host5 is a vHBA used with the following LUNs:
$ lsscsi -tg
...
[5:0:4:0] disk fc:0x5006016844602198,0x101f00 /dev/sdh /dev/sg23
[5:0:5:0] disk fc:0x5006016044602198,0x102000 /dev/sdi /dev/sg24
...
Calling virStorageFileGetSCSIKey would return:
/lib/udev/scsi_id --device /dev/sdh --whitelisted --replace-whitespace /dev/sdh
350060160c460219850060160c4602198
/lib/udev/scsi_id --device /dev/sdh --whitelisted --replace-whitespace /dev/sdi
350060160c460219850060160c4602198
Note that althrough /dev/sdh and /dev/sdi are separate LUNs, they
end up with the same serial number used for the vol->key value.
When virStoragePoolFCRefreshThread calls virStoragePoolObjAddVol
the second LUN fails to be added with the following message
getting logged:
virHashAddOrUpdateEntry:341 : internal error: Duplicate key
To resolve this, virStorageFileGetNPIVKey will use a similar call
sequence as virStorageFileGetSCSIKey, except that it will add the
"--export" option to the call. This results in more detailed output
which needs to be parsed in order to formulate a unique enough key
to be used. In order to be unique enough, the returned value will
concatenate the target port as returned in the "ID_TARGET_PORT"
field from the command to the "ID_SERIAL" value.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Alter the code to use the virStorageFileGetSCSIKey helper
to fetch the unique key for the SCSI disk. Alter the logic
to follow the former code which would return a duplicate
of @dev when either the virCommandRun succeeded, but returned
an empty string or when WITH_UDEV was not true.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Alter the "real" code to return -2 on virCommandRun failure.
Alter the comments and function header to describe the function
and its returns.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This is mainly about /dev/sev and its default permissions 0600. Of
course, rule of 'tinfoil' would be that we can't trust anything, but the
probing code in QEMU is considered safe from security's perspective + we
can't create an udev rule for this at the moment, because ioctls and
file system permissions aren't cross-checked in kernel and therefore a
user with read permissions could issue a 'privileged' operation on SEV
which is currently only limited to root.
https://bugzilla.redhat.com/show_bug.cgi?id=1665400
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Historically firewall rules for virtual networks were added straight
into the base chains. This works but has a number of bugs and design
limitations:
- It is inflexible for admins wanting to add extra rules ahead
of libvirt's rules, via hook scripts.
- It is not clear to the admin that the rules were created by
libvirt
- Each rule must be deleted by libvirt individually since they
are all directly in the builtin chains
- The ordering of rules in the forward chain is incorrect
when multiple networks are created, allowing traffic to
mistakenly flow between networks in one direction.
To address all of these problems, libvirt needs to move to creating
rules in its own private chains. In the top level builtin chains,
libvirt will add links to its own private top level chains.
Addressing the traffic ordering bug requires some extra steps. With
everything going into the FORWARD chain there was interleaving of rules
for outbound traffic and inbound traffic for each network:
-A FORWARD -d 192.168.3.0/24 -o virbr1 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT
-A FORWARD -s 192.168.3.0/24 -i virbr1 -j ACCEPT
-A FORWARD -i virbr1 -o virbr1 -j ACCEPT
-A FORWARD -o virbr1 -j REJECT --reject-with icmp-port-unreachable
-A FORWARD -i virbr1 -j REJECT --reject-with icmp-port-unreachable
-A FORWARD -d 192.168.2.0/24 -o virbr0 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT
-A FORWARD -s 192.168.2.0/24 -i virbr0 -j ACCEPT
-A FORWARD -i virbr0 -o virbr0 -j ACCEPT
-A FORWARD -o virbr0 -j REJECT --reject-with icmp-port-unreachable
-A FORWARD -i virbr0 -j REJECT --reject-with icmp-port-unreachable
The rule allowing outbound traffic from virbr1 would mistakenly
allow packets from virbr1 to virbr0, before the rule denying input
to virbr0 gets a chance to run.
What we really need todo is group the forwarding rules into three
distinct sets:
* Cross rules - LIBVIRT_FWX
-A FORWARD -i virbr1 -o virbr1 -j ACCEPT
-A FORWARD -i virbr0 -o virbr0 -j ACCEPT
* Incoming rules - LIBVIRT_FWI
-A FORWARD -d 192.168.3.0/24 -o virbr1 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT
-A FORWARD -o virbr1 -j REJECT --reject-with icmp-port-unreachable
-A FORWARD -d 192.168.2.0/24 -o virbr0 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT
-A FORWARD -o virbr0 -j REJECT --reject-with icmp-port-unreachable
* Outgoing rules - LIBVIRT_FWO
-A FORWARD -s 192.168.3.0/24 -i virbr1 -j ACCEPT
-A FORWARD -i virbr1 -j REJECT --reject-with icmp-port-unreachable
-A FORWARD -s 192.168.2.0/24 -i virbr0 -j ACCEPT
-A FORWARD -i virbr0 -j REJECT --reject-with icmp-port-unreachable
There is thus no risk of outgoing rules for one network mistakenly
allowing incoming traffic for another network, as all incoming rules
are evalated first.
With this in mind, we'll thus need three distinct chains linked from
the FORWARD chain, so we end up with:
INPUT --> LIBVIRT_INP (filter)
OUTPUT --> LIBVIRT_OUT (filter)
FORWARD +-> LIBVIRT_FWX (filter)
+-> LIBVIRT_FWO
\-> LIBVIRT_FWI
POSTROUTING --> LIBVIRT_PRT (nat & mangle)
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Some of the query callbacks want to know the firewall layer that was
being used for triggering the query to avoid duplicating that data.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1665553
Ceph can be mounted just like any other filesystem and in fact is
a shared and cluster filesystem. The filesystem magic constant
was taken from kernel sources as it is not in magic.h yet.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
We have this very handy macro called VIR_STEAL_PTR() which steals
one pointer into the other and sets the other to NULL. The
following coccinelle patch was used to create this commit:
@ rule1 @
identifier a, b;
@@
- b = a;
...
- a = NULL;
+ VIR_STEAL_PTR(b, a);
Some places were clean up afterwards to make syntax-check happy
(e.g. some curly braces were removed where the body become a one
liner).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Upcoming patches need an array of strings for use in QMP
block-dirty-bitmap-merge. A convenience wrapper cuts down
on the verbosity of creating the array, similar to the
existing virJSONValueObjectAppendString().
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
A function that returns -1 for multiple possible failures, but only
raises a libvirt error for some of those failures, can be hard to
use correctly. Yet both of our JSON object/array appenders fall in
that pattern. True, the silent errors represent coding bugs that
none of the callers should ever trigger, while the noisy errors
represent memory failures that can happen anywhere, so we happened
to never end up failing without an error. But it is better to
either use the _QUIET memory allocation variants, and make callers
decide to report failure; or make all failure paths noisy. This
patch takes the latter approach.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similar to what commit 86dba8f3 did for virPortAllocatorRelease,
ignore port 0 in virPortAllocatorSetUsed.
For all the reasonable use cases the callers already check that
the port is non-zero, however if the port from the XML overflows
unsigned short and turns into 0, it can be set as used by
virPortAllocatorSetUsed but not released by virPortAllocatorRelease.
Also skip port '0' in virPortAllocatorSetUsed to make this behavior
symmetric.
The serenity was disturbed by commit 5dbda5e9 which started using
virPortAllocatorRelease instead of virPortAllocatorSetUsed (false).
https://bugzilla.redhat.com/show_bug.cgi?id=1591645
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
This partially reverts 00dc991ca1.
2,030 (1,456 direct, 574 indirect) bytes in 14 blocks are definitely lost in loss record 77 of 80
at 0x4C30E96: calloc (vg_replace_malloc.c:711)
by 0x50F83AA: virAlloc (viralloc.c:143)
by 0x5178DFA: virPCIDeviceNew (virpci.c:1753)
by 0x51753E9: virPCIDeviceIterDevices (virpci.c:468)
by 0x5175EB5: virPCIDeviceGetParent (virpci.c:759)
by 0x517AB55: virPCIDeviceIsBehindSwitchLackingACS (virpci.c:2476)
by 0x517AC24: virPCIDeviceIsAssignable (virpci.c:2494)
by 0x10BF27: testVirPCIDeviceIsAssignable (virpcitest.c:229)
by 0x10D14C: virTestRun (testutils.c:174)
by 0x10C535: mymain (virpcitest.c:422)
by 0x10F1B6: virTestMain (testutils.c:1112)
by 0x10CF93: main (virpcitest.c:455)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This is a return argument that is to be compared against NULL on
successful return. However, it is not initialized and therefore
relies on callers setting it to NULL prior calling the function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The @linkdev is In/Out function parameter as second order
reference pointer so requires first order dereference for
checking NULL which can be the result of virPCIGetNetName().
Fixes: d6ee56d723 (util: change virPCIGetNetName() to not return error if device has no net name)
Signed-off-by: Radoslaw Biernacki <radoslaw.biernacki@linaro.org>
Signed-off-by: dann frazier <dann.frazier@canonical.com>
Removing redundant sections of the code
Signed-off-by: Radoslaw Biernacki <radoslaw.biernacki@linaro.org>
Signed-off-by: dann frazier <dann.frazier@canonical.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
libvirt wrongly assumes that VF netdev has to have the
netdev assigned to PF. There is no such requirement in SRIOV standard.
This patch change the virNetDevSwitchdevFeature() function to deal
with SRIOV devices which does not have netdev on PF. Also corrects
one comment about PF netdev assumption.
One example of such devices is ThunderX VNIC.
By applying this change, VF device is used for virNetlinkCommand() as
it is the only netdev assigned to VNIC.
Signed-off-by: Radoslaw Biernacki <radoslaw.biernacki@linaro.org>
Signed-off-by: dann frazier <dann.frazier@canonical.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit 7282f455a got rid of the VIR_WARNINGS_NO_CAST_ALIGN macro
when refactoring the code and broke the build with clang.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
I had intended to make these changes to commit d40b820c before
pushing, but forgot about it during the day between the initial review
and ACK.
Neither change is significant - just returning immediately when
virNetDevGetName() fails (instead of logging a debug message first)
and eliminating a comment that adds to confusion rather than
eliminating it. Still, the changes should be made to be more
consistent with nearly identical code just a few lines up (added in
commit 7282f455)
Signed-off-by: Laine Stump <laine@laine.org>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When checking the setting of accept_ra, we have assumed that all
routes have a single nexthop, so the interface of the route would be
in the RTA_OIF attribute of the netlink RTM_NEWROUTE message. But
multipath routes don't have an RTA_OIF; instead, they have an
RTA_MULTIPATH attribute, which is an array of rtnexthop, with each
rtnexthop having an interface. This patch adds a loop to look at the
setting of accept_ra of the interface for every rtnexthop in the
array.
Signed-off-by: Laine Stump <laine@laine.org>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This is about the same number of code lines, but is simpler, and more
consistent with what will be added to check another attribute in a
coming patch.
As a side effect, it
Resolves: https://bugzilla.redhat.com/1583131
Signed-off-by: Laine Stump <laine@laine.org>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This same operation needs to be done in multiple places, so move the
inline code into a separate function.
Signed-off-by: Laine Stump <laine@laine.org>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This is problematic if a callback function wants to send the nlmsghdr
to a library function that has no "const" in its prototype
(e.g. nlmsg_find_attr())
Signed-off-by: Laine Stump <laine@laine.org>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Essentially, bring back the old behaviour as of commit eba36a38 which
was later changed by commit ae06048bf5. Even though all the stderr
messages will eventually end up in the journal, we're not making use of
the fields journald provides.
https://bugzilla.redhat.com/show_bug.cgi?id=1592644
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
In 600462834f we've tried to remove Author(s): lines
from comments at the beginning of our source files. Well, in some
files while we removed the "Author" line we did not remove the
actual list of authors.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This test checks if security label remembering works correctly.
It uses qemuSecurity* APIs to do that. And some mocking (even
though it's not real mocking as we are used to from other tests
like virpcitest). So far, only DAC driver is tested.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The arguments to the N_() macro must only ever be a literal string. It
is not possible to use macro arguments, or use macro string
concatenation in this context. The N_() macro is a no-op whose only
purpose is to act as a marker for xgettext when it extracts translatable
strings from the source code. Anything other than a literal string will
be silently ignored by xgettext.
Unfortunately this means that the clever MSG, MSG2 & MSG_EXISTS macros
used for building up error message strings have prevented any of the
error messages getting marked for translation. We must sadly, revert to
a more explicit listing of strings for now.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The QEMU command line arguments are very long and currently all written
on a single line to /var/log/libvirt/qemu/$GUEST.log. This introduces
logic to add line breaks after every env variable and "-" optional
argument, and every positional argument. This will create a clearer log
file, which will in turn present better in bug reports when people cut +
paste from the log into a bug comment.
An example log file entry now looks like this:
2018-12-14 12:57:03.677+0000: starting up libvirt version: 5.0.0, qemu version: 3.0.0qemu-3.0.0-1.fc29, kernel: 4.19.5-300.fc29.x86_64, hostname: localhost.localdomain
LC_ALL=C \
PATH=/usr/local/bin:/usr/local/sbin:/usr/bin:/usr/sbin \
HOME=/home/berrange \
USER=berrange \
LOGNAME=berrange \
QEMU_AUDIO_DRV=none \
/usr/bin/qemu-system-ppc64 \
-name guest=guest,debug-threads=on \
-S \
-object secret,id=masterKey0,format=raw,file=/home/berrange/.config/libvirt/qemu/lib/domain-33-guest/master-key.aes \
-machine pseries-2.10,accel=tcg,usb=off,dump-guest-core=off \
-m 1024 \
-realtime mlock=off \
-smp 1,sockets=1,cores=1,threads=1 \
-uuid c8a74977-ab18-41d0-ae3b-4041c7fffbcd \
-display none \
-no-user-config \
-nodefaults \
-chardev socket,id=charmonitor,fd=23,server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
-no-shutdown \
-boot strict=on \
-device qemu-xhci,id=usb,bus=pci.0,addr=0x1 \
-device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x2 \
-sandbox on,obsolete=deny,elevateprivileges=deny,spawn=deny,resourcecontrol=deny \
-msg timestamp=on
2018-12-14 12:57:03.730+0000: shutting down, reason=failed
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virCommand APIs do not expect to be given a NULL value for an arg
name or value. Such a mistake can lead to execution of the wrong
command, as the NULL may prematurely terminate the list of args.
Detect this and report suitable error messages.
This identified a flaw in the storage test which was passing a NULL
instead of the volume path. This flaw was then validated by an incorrect
set of qemu-img args as expected data.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Simplify adding of new errors by just adding them to the array of
messages rather than having to add conversion code.
Additionally most of the messages add the format string part as a suffix
so we can avoid some of the duplication by using a macro which adds the
suffix to the original string. This way most messages fit into the 80
column limit and only 3 exceed 100 colums.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Erik Skultety <eskultet@redhat.com>
Clarify how @info is used and what the returned values look like.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Simplify wording of the error string for VIR_ERR_OPEN_FAILED and
VIR_ERR_CALL_FAILED. The error codes itself are currently unused so it
will not impact any client.
This will simplify upcomming patch which refactors how we convert these.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Few error codes were missing the version of the message with additional
info. In case of the modified messages it's not very likely they'll ever
report any additional data, but for the sake of consistency we should
provide them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Additional information for an error message is either in form of a
string or empty. Fix two offenders. One used %d as the format modifier
and the second one always expected a string.
Thankfully, neither of the offenders are currently in effect.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
We do have one for the error domain but not for the error number itself.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Require that all headers are guarded by a symbol named
LIBVIRT_$FILENAME
where $FILENAME is the uppercased filename, with all characters
outside a-z changed into '_'.
Note we do not use a leading __ because that is technically a
namespace reserved for the toolchain.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This introduces a syntax-check script that validates header files use a
common layout:
/*
...copyright header...
*/
<one blank line>
#ifndef SYMBOL
# define SYMBOL
....content....
#endif /* SYMBOL */
For any file ending priv.h, before the #ifndef, we will require a
guard to prevent bogus imports:
#ifndef SYMBOL_ALLOW
# error ....
#endif /* SYMBOL_ALLOW */
<one blank line>
The many mistakes this script identifies are then fixed.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When libvirt is reconnecting to running domain that uses cgroup v2
the QEMU process reports cgroup for the emulator directory because the
main thread is in that cgroup. We need to remove the "/emulator" part
in order to match with the root cgroup directory name for that domain.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The rewrite to support cgroup v2 missed this function. In cgroup v2
we have different files to track tasks.
We would fail to remove cgroup on non-systemd OSes if there is any
extra process assigned to guest cgroup because we would not kill any
process form the guest cgroup.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
In many files there are header comments that contain an Author:
statement, supposedly reflecting who originally wrote the code.
In a large collaborative project like libvirt, any non-trivial
file will have been modified by a large number of different
contributors. IOW, the Author: comments are quickly out of date,
omitting people who have made significant contribitions.
In some places Author: lines have been added despite the person
merely being responsible for creating the file by moving existing
code out of another file. IOW, the Author: lines give an incorrect
record of authorship.
With this all in mind, the comments are useless as a means to identify
who to talk to about code in a particular file. Contributors will always
be better off using 'git log' and 'git blame' if they need to find the
author of a particular bit of code.
This commit thus deletes all Author: comments from the source and adds
a rule to prevent them reappearing.
The Copyright headers are similarly misleading and inaccurate, however,
we cannot delete these as they have legal meaning, despite being largely
inaccurate. In addition only the copyright holder is permitted to change
their respective copyright statement.
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Most of the iptables APIs share code for the add/delete paths, but a
couple were separated. Merge the remaining APIs to facilitate future
changes.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The function clears and frees the passed buffers on success, but not in
one case of failure. Modify the control flow that the args are always
consumed, record it in the docs and remove few pointless cleanup paths
in callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Up until now, we formatted 'rendernode=' onto QEMU cmdline only if the
user specified it in the XML, otherwise we let QEMU do it for us. This
causes permission issues because by default the /dev/dri/renderDX
permissions are as follows:
crw-rw----. 1 root video
There's literally no reason why it shouldn't be libvirt picking the DRM
render node instead of QEMU, that way (and because we're using
namespaces by default), we can safely relabel the device within the
namespace.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This is the first step towards libvirt picking the first available
render node instead of QEMU. It also makes sense for us to be able to do
that, since we allow specifying the node directly for SPICE, so if
there's no render node specified by the user, we should pick the first
available one. The algorithm used for that is essentially the same as
the one QEMU uses.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The call of virResctrlMonitorGetStats will allocate the memory for
holding cache occupancy or memory bandwidth statistics.
This patch adds the function virResctrlMonitorFreeStats as the
opposing action of virResctrlMonitorGetStats to free the memory.
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Return a list of virResctrlMonitorStatsPtr instead of
a virResctrlMonitorStats array in virResctrlMonitorGetStats.
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
There are certain cases e.g. containers where the sysfs path might
exists, but might fail. Unfortunately the exact restrictions are only
known to libvirt when trying to write to it so we need to try it.
But in case it fails there is no need to fully abort, in those cases try
to fall back to the older ioctl interface which can still work.
That makes setting up a bridge in unprivileged LXD containers work.
Fixes: https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/1802906
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
Reported-by: Brian Candler <b.candler@pobox.com>
The path argument of virFileIsDir should be a full name
of file, pathname and filename. Fixed it by passing the
full path name to virFileIsDir.
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Since the functions only return 0 or 1, they should return bool. I missed the
change when "refactoring" the first commit.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Both virProcessRunInMountNamespace() and virProcessRunInFork()
look very similar. De-duplicate the code and make
virProcessRunInMountNamespace() call virProcessRunInFork().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This new helper can be used to spawn a child process and run
passed callback from it. This will come handy esp. if the
callback is not thread safe.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
We were mistakenly skipping virZPCIDeviceAddressIsEmpty() and
virZPCIDeviceAddressIsValid() when compiling on non-Linux,
which unsurprisingly ended up causing linking failures later
in the build process.
Clue-stick-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
This patch introduces new XML parser/formatter functions. Uid is
16-bit and non-zero. Fid is 32-bit. They are the two attributes of zpci
which is introduced as PCI address element. Zpci element is parsed and
formatted along with PCI address. And add the related test cases.
Signed-off-by: Yi Min Zhao <zyimin@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This patch introduces PCI address extension flag for virDomainDeviceInfo
and virPCIDeviceAddress. The extension flag in virDomainDeviceInfo is
used internally during calculating PCI extension flag. The one in
virPCIDeviceAddress is the duplicate to indicate extension address is
being used. Currently only zPCI extension address is introduced to deal
with 'uid' and 'fid' on the S390 platform.
Signed-off-by: Yi Min Zhao <zyimin@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Add zPCI definitions in preparation of extending the PCI address
with parameters uid (user-defined identifier) and fid (PCI function
identifier).
Signed-off-by: Yi Min Zhao <zyimin@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Commit 901d2b9c introduced virCgroupGetMemoryStat and replaced
the LXC virLXCCgroupGetMemStat logic in commit e634c7cd0. However,
in doing so the replacement wasn't exact as the LXC logic used
getline() to process the cgroup controller data, while the new
virCgroupGetMemoryStat used "memory.stat" manual buffer read/
processing which neglected to forward through @line in order
to read each line in the output.
To fix that, we should be sure to carry forward the @line value
for each line read updating it beyond that current @newLine value
once we've calculated the values that we want.
Signed-off-by: Peter Chubb <peter.chubb@data61.csiro.au>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This reverts commit ccc72d5cbd.
Based on upstream comment to a follow-up patch, this didn't take the
right approach and the right thing to do is revert and rework.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Missed during review and surprisingly my run through Coverity also
didn't see this. I only noticed it when reading the code while fixing
the build breaker for commit 36780a86a.
With all those continues we would leak @stats.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add interfaces monitor group to support operations such
as GetID, SetID, Remove, SetAlloc, etc.
Implement the internal virResctrlMonitorGetStats to fetch all
the statistical data and the virResctrlMonitorGetCacheOccupancy
in order to fetch the cache specific "llc_occupancy" value.
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Refactor virResctrlAllocSetID generating an error if an attempt
is made to overwrite the existing value.
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Add interface for creating the resource monitoring group according
to '@virResctrlMonitor->path'.
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The code for creating resctrl allocation group could be reused
for monitoring group, refactor it for reuse in the later patch.
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The code of adding PID to the allocation could be reused, refactor it
for later reuse.
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Add interface for resctrl monitor to determine the path.
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The code for determining resctrl allocation path could be reused
for monitor. Refactor it for reuse.
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Cache Monitoring Technology (aka CMT) provides the capability
to report cache utilization information of system task.
This patch introduces the concept of resctrl monitor through
data structure virResctrlMonitor.
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Refactor schemas and virresctrl to support optional <cache> element
in <cachetune>.
Later, the monitor entry will be introduced and to be placed
under <cachetune>. Either cache entry or monitor entry is
an optional element of <cachetune>.
An cachetune has no <cache> element is taking the default resource
allocating policy defined in '/sys/fs/resctrl/schemata'.
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
When no server name is provided in the URI, modern versions of libxml2
will set the port to '-1'. This is a change from behaviour with earlier
versions which set it to 0.
Libvirt expects the port to be 0 in these cases and as a result we get a
bug when connecting to URIs which lack a server name:
$ virsh -c test+ssh:///default list
error: failed to connect to the hypervisor
error: Cannot recv data: Bad port '-1': Connection reset by peer
This libxml2 change was attempting to fix another bug identified by
libvirt where it didn't roundtrip URIs correctly in:
beb7281055
Essentially libxml2 was not expecting apps to look at the URI port
field when the server name is not provided. This was a reasonable
assumption, but none the less libvirt did look at it :-)
The fix is to ensure we explicitly set port to 0 when server name
is not present, avoiding undefined behaviour for the port field in
libxml2.
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1631606
Changes made to manage and utilize a secondary connection
driver to APIs outside the scope of the primary connection
driver have resulted in some confusion processing polkit rules
since the simple "access denied" error message doesn't provide
enough of a clue when combined with the "authentication failed:
access denied by policy" as to which connection driver refused
or failed the ACL check.
In order to provide some context, let's modify the existing
"access denied" error returne from the various vir*EnsureACL
API's to provide the connection driver name that is causing
the failure. This should provide the context for writing the
polkit rules that would allow access via the driver.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Adjusting domain format documentation, adding device address
support and adding command line generation for vfio-ap.
Since only one mediated hostdev with model vfio-ap is supported a check
disallows to define domains with more than one such hostdev device.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Chris Venteicher <cventeic@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1640465
Weirdly enough, there can be symlinks in the path we are trying
to fix. If it is the case our clever algorithm that finds matches
against mount table won't work. Canonicalize path at the
beginning then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The virFileInData() function should return to the caller if the
current position the passed file is in is a data section or a
hole (and also how long the current section is). At any rate,
upon return from this function (be it successful or not) the
original position in the file is restored. This may mess up with
errno which might have been set earlier. Save the errno into a
local variable so it can be restored for the caller's sake.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The URI parser used by libvirt does not populate uri->path if the
trailing slash is missing. The code virStorageSourceParseBackingURI
would then not populate src->path.
As only NBD network disks are allowed to have the 'name' field in the
XML defining the disk source omitted we'd generate an invalid XML which
we'd not parse again.
Fix it by populating src->path with an empty string if the uri is
lacking slash.
As pointed out above NBD is special in this case since we actually allow
it being NULL. The URI path is used as export name. Since an empty
export does not make sense the new approach clears the src->path if the
trailing slash is present but nothing else.
Add test cases now to cover all the various cases for NBD and non-NBD
uris as there was to time only 1 test abusing the quirk witout slash for
NBD and all other URIs contained the slash or in case of NBD also the
export name.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
The name is misleading. Change it to 'uristr' so that 'path' can be
reused in the proper context later.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
There are couple of things wrong with the current implementation.
The first one is that in the first loop the code tries to build a
list of fuse.glusterfs mount points. Well, since the strings are
allocated in a temporary buffer and are not duplicated this
results in wrong decision made later in the code.
The second problem is that the code does not take into account
subtree mounts. For instance, if there's a fuse.gluster mounted
at /some/path and another FS mounted at /some/path/subdir the
code would not recognize this subdir mount.
Reported-by: Han Han <hhan@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
If the given path is already a mount point (e.g. a bind mount of
a file, or simply a direct mount point of a FS), then our code
fails to detect that because the first thing it does is cutting
off part after last slash '/'.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
On s390x the struct member f_type of statsfs is hard coded to 'unsigned
int'. Change virFileIsSharedFixFUSE() to take a 'long long int' and use
a temporary to avoid pointer-casting.
This fixes the following error:
../../src/util/virfile.c:3578:38: error: cast increases required alignment of target type [-Werror=cast-align]
virFileIsSharedFixFUSE(path, (long *) &sb.f_type);
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
virFileReadValueUint does not log errors for non-existient files,
it merely returns -2.
Commit 12093f1 introduced this.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
This enables to use both cgroup v1 and v2 at the same time together
with libvirt. It is supported by kernel and there is valid use-case,
not all controllers are implemented in cgroup v2 so there might be
configurations where administrator would enable these missing
controllers in cgroup v1.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
In order to set CPU cfs period using cgroup v2 'cpu.max' interface
we need to load the current value of CPU cfs quota first because
format of 'cpu.max' interface is '$quota $period' and in order to
change 'period' we need to write 'quota' as well. Writing only one
number changes only 'quota'.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
In cgroups v2 we need to handle threads and processes differently.
If you need to move a process you need to write its pid into
cgrou.procs file and it will move the process with all its threads
as well. The whole process will be moved if you use tid of any thread.
In order to move only threads at first we need to create threaded group
and after that we can write the relevant thread tids into cgroup.threads
file. Threads can be moved only into cgroups that are children of
cgroup of its process.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
When creating cgroup hierarchy we need to enable controllers in the
parent cgroup in order to be usable. That means writing "+{controller}"
into cgroup.subtree_control file. We can enable only controllers that
are enabled for parent cgroup, that means we need to do that for the
whole cgroup tree.
Cgroups for threads needs to be handled differently in cgroup v2. There
are two types of controllers:
- domain controllers: these cannot be enabled for threads
- threaded controllers: these can be enabled for threads
In addition there are multiple types of cgroups:
- domain: normal cgroup
- domain threaded: a domain cgroup that serves as root for threaded
cgroups
- domain invalid: invalid cgroup, can be changed into threaded, this
is the default state if you create subgroup inside
domain threaded group or threaded group
- threaded: threaded cgroup which can have domain threaded or
threaded as parent group
In order to create threaded cgroup it's sufficient to write "threaded"
into cgroup.type file, it will automatically make parent cgroup
"domain threaded" if it was only "domain". In case the parent cgroup
is already "domain threaded" or "threaded" it will modify only the type
of current cgroup. After that we can enable threaded controllers.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Cgroup v2 has only single mount point for all controllers. The list
of controllers is stored in cgroup.controllers file, name of controllers
are separated by space.
In cgroup v2 there is no cpuacct controller, the cpu.stat file always
exists with usage stats.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
If the placement was copied from parent or set to absolute path
there is nothing to do, otherwise set the placement based on
process placement from /proc/self/cgroup or /proc/{pid}/cgroup.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
When reconnecting to a domain we are validating the cgroup name.
In case of cgroup v2 we need to validate only the new format for host
without systemd '{machinename}.libvirt-{drivername}' or scope name
generated by systemd.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
We cannot detect only mount points to figure out whether cgroup v2
is available because systemd uses cgroup v2 for process tracking and
all controllers are mounted as cgroup v1 controllers.
To make sure that this is no the situation we need to check
'cgroup.controllers' file if it's not empty to make sure that cgroup
v2 is not mounted only for process tracking.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Place cgroup v2 backend type before cgroup v1 to make it obvious
that cgroup v2 is preferred implementation.
Following patches will introduce support for hybrid configuration
which will allow us to use both at the same time, but we should
prefer cgroup v2 regardless.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1632711
GlusterFS is typically safe when it comes to migration. It's a
network FS after all. However, it can be mounted via FUSE driver
they provide. If that is the case we fail to identify it and
think migration is not safe and require VIR_MIGRATE_UNSAFE flag.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Commit 87a8a30d6 added the function based on the virsh function,
but used an unsigned long long instead of a double and thus that
limits the maximum result.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
This reverts commit 1602aa28f8.
There is no need to call virCgroupRemove() nor virCgroupFree() if
virCgroupEnableMissingControllers() fails because it will not modify
'group' at all.
The cleanup of directories is done in virCgroupMakeGroup().
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Cgroups are linux specific and we need to make sure that the code is
compiled only on linux. On different OSes it fails the compilation:
../../src/util/vircgroupv1.c:65:19: error: variable has incomplete type 'struct mntent'
struct mntent entry;
^
../../src/util/vircgroupv1.c:65:12: note: forward declaration of 'struct mntent'
struct mntent entry;
^
../../src/util/vircgroupv1.c:74:12: error: implicit declaration of function 'getmntent_r' is invalid in C99 [-Werror,-Wimplicit-function-declaration]
while (getmntent_r(mounts, &entry, buf, sizeof(buf)) != NULL) {
^
../../src/util/vircgroupv1.c:814:39: error: use of undeclared identifier 'MS_NOSUID'
if (mount("tmpfs", root, "tmpfs", MS_NOSUID|MS_NODEV|MS_NOEXEC, opts) < 0) {
^
../../src/util/vircgroupv1.c:814:49: error: use of undeclared identifier 'MS_NODEV'
if (mount("tmpfs", root, "tmpfs", MS_NOSUID|MS_NODEV|MS_NOEXEC, opts) < 0) {
^
../../src/util/vircgroupv1.c:814:58: error: use of undeclared identifier 'MS_NOEXEC'
if (mount("tmpfs", root, "tmpfs", MS_NOSUID|MS_NODEV|MS_NOEXEC, opts) < 0) {
^
../../src/util/vircgroupv1.c:841:65: error: use of undeclared identifier 'MS_BIND'
if (mount(src, group->legacy[i].mountPoint, "none", MS_BIND,
^
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
All the system headers are used only if we are compiling on linux
and they all are present otherwise we would have seen build errors
because in our tests/vircgrouptest.c we use only __linux__ to check
whether to skip the cgroup tests or not.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
tests/vircgrouptest.c uses #ifdef __linux__ for a long time and no
failure was reported so far so it's safe to assume that __linux__ is
good enough to guard cgroup code.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Use the mnemonic macros of libdbus for 1 (TRUE) and 0 (FALSE).
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Report a debug message if dbus_watch_handle() returns FALSE.
dbus_watch_handle() returns FALSE if there wasn't enough memory for
reading or writing.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
As documented at
https://dbus.freedesktop.org/doc/api/html/group__DBusConnection.html#ga2522ac5075dfe0a1535471f6e045e1ee
the creator of a non-shared D-Bus connection has to release the last
reference after closing for freeing.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Grab a ref for info->bus (a DBus connection) as long as the while loop
is running. With the grabbed reference it is ensured that info->bus
isn't freed as long as the while loop is executed. This is necessary
as it's allowed to drop the last ref for the bus connection in a
handler.
There was already a bug of this kind in libdbus itself:
https://bugs.freedesktop.org/show_bug.cgi?id=15635.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
With the introduction of cgroup v2 there are new names used with
cgroups based on which version is used:
- legacy: cgroup v1
- unified: cgroup v2
- hybrid: cgroup v1 and cgroup v2
Let's use 'legacy' instead of 'cgroupv1' or 'controllers' in our code.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
They all need virCgroupV1GetMemoryUnlimitedKB() so it's easier to
move them in one commit.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
We need to update one test-case because now new cgroup object will be
created only if there is any cgroup backend available.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
We will need to extract current cgroup v1 implementation into separate
backend because there will be new cgroup v2 implementation and both will
have to co-exist.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This will be required once cgroup v2 is introduced. The cgroup
detection is not simple and we will have multiple backends so we
should not just jump into the middle of the detection code.
In order to use virCgroupNewSelf we need to create all the remaining
data files:
- {name}.cgroups represents /proc/cgroups, it is a list of cgroup
controllers compiled into kernel
- {name}.self.cgroup represents /proc/self/cgroup, it describes
cgroups to which the process belongs
For "no-cgroups" we need to modify the expected behavior because
virCgroupNewSelf() will fail if there are no controllers available.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Because we can set which files to return for cgroup tests there
is no need to have special function tailored to run tests.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Once we introduce cgroup v2 support we need to handle processes and
threads differently.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Use flags in virCgroupAddTaskInternal instead of boolean parameter.
Following patch will add new flag to indicate thread instead of process.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
In cgroup v2 we need to handle processes and threads differently,
following patch will introduce virCgroupAddThread.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
If we are on host with systemd we need to build cgroup hierarchy
ourselves for controllers that are not managed by systemd.
As a starting parent we need to force root group because
virCgroupMakeGroup() takes that parent in order to inherit values
for cpuset controller.
By default cpuset controller is managed by systemd so we will never
hit the issue but for v2 cgroups we need to use parent cgroup every
time.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
If virCgroupEnableMissingControllers() fails it could have already
created some directories, we should clean it up as well.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
There seems to be no need to add the ignore_value wrapper or
caste with (void) to the unlink() calls, so let's just remove
them. I assume at one point in time Coverity complained. So,
let's just be consistent - those that care to check the return
status can and those that don't can just have the naked unlink.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This patch is introducing cache monitor(CMT) to cache and
memory bandwidth monitor(MBM) for monitoring CPU memory
bandwidth.
The host capability of the two monitors is also introduced
in this patch.
For CMT, the host capability is shown like:
<host>
...
<cache>
<bank id='0' level='3' type='both' size='15' unit='MiB' cpus='0-5'>
<control granularity='768' min='1536' unit='KiB' type='both' maxAllocs='4'/>
</bank>
<monitor level='3' 'reuseThreshold'='270336' maxMonitors='176'>
<feature name='llc_occupancy'/>
</monitor>
</cache>
...
</host>
For MBM, the capability is shown like this:
<host>
...
<memory_bandwidth>
<node id='1' cpus='6-11'>
<control granularity='10' min ='10' maxAllocs='4'/>
</node>
<monitor maxMonitors='176'>
<feature name='mbm_total_bytes'/>
<feature name='mbm_local_bytes'/>
</monitor>
</memory_bandwidth>
...
</host>
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This patch introduces the resource monitor and creates the interface
for getting host capability of resource monitor from the system resource
control file system.
The resource monitor takes the role of RDT monitoring group and could be
used to monitor the resource consumption information, such as the last
level cache occupancy and the utilization of memory bandwidth.
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
All of the ones being removed are pulled in by internal.h. The only
exception is sanlock which expects the application to include <stdint.h>
before sanlock's headers, because sanlock prototypes use fixed width
int, but they don't include stdint.h themselves, so we have to leave
that one in place.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
It doesn't really make sense for us to have stdlib.h and string.h but
not stdio.h in the internal.h header.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
So far the virLockSpaceAcquireResource() locks the first byte in
the underlying file. But caller might want to lock other range.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Functions that deal with virPCIDeviceAddress exclusively
belong to util/virpci.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
commit b00c9c39 removed the label end_of_netlink_messages and 'return
table' statement, It causes the function virArpTableGet doesn't return
a proper virArpTable pointer.
How to reproduce:
# virsh domiflist sles12sp3
Interface Type Source Model MAC
-------------------------------------------------------
vnet0 network default virtio 52:54:00💿02:e6
# virsh domifaddr sles12sp3 --source arp
error: Failed to query for interfaces addresses
error: An error occurred, but the cause is unknown
It seems that the "if (nh->nlmsg_type == NLMSG_DONE)" statement won't be
meted. So this patch adds 'return table' when the iterations of nlmsghdr
for loop is over.
Signed-off-by: Lin Ma <lma@suse.com>
Reviewed-by: Chen Hanxiao <chenhanxiao@gmail.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Instead of duplicating the code from virGet{User,Group}IDByName(), which are
static anyway, extend those functions to accept NULL pointers for the result and
a boolean for controlling the error reporting.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This patch simplifies virNetDevBridgeCreate and virNetDevMacVLanCreate
functions by making use of the virNetlinkNewLink helper.
Signed-off-by: Shi Lei <shi_lei@massclouds.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This patch adds wrapper macros around nla_nest_[start|end] and nla_put,
thus getting rid of some redundancy and making virNetlinkNewLink more
readable.
Signed-off-by: Shi Lei <shi_lei@massclouds.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
This patch introduces virNetlinkNewLink helper which wraps the common
libnl/netlink code to create a new link.
Signed-off-by: Shi Lei <shi_lei@massclouds.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
nlmsg_append from the libnl library provides exactly the same
functionality, so we should rely on that instead. This also allows us to
drop the aforementioned function completely.
Signed-off-by: Shi Lei <shi_lei@massclouds.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
@resp is allocated by virNetlinkCommand and the caller is responsible
for freeing the buffer. Since we already converted this module to use
VIR_AUTO{FREE,PTR} macros, let's resolve the problem by using them.
Signed-off-by: Shi Lei <shi_lei@massclouds.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
There's a single user for it which takes an existing
virPCIDeviceAddress, passes its various bits to the
function which in turn constructs a virPCIDevice and
then copies the string representation for the caller
to use: we can use virPCIDeviceAddressAsString()
instead and avoid creating the virPCIDevice in the
first place. Since the function ends up having no
users after the change, we can just drop it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The struct is called virPCIDeviceAddress and the
functions operating on it should be named accordingly.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Add a new modifier letter for virJSONValueObjectAddVArgs which will add
a boolean value with our tristate semantics. The value is omitted when
the _ABSENT value is used.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
A generic "failed to parse xml document" message without telling us
which XML file failed is quite unhelpful.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This fixes virCgroupEnableMissingControllers where virCgroupRemove
was not called in case virCgroupMakeGroup failed.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The case where we need path of any controller is only for internal use
so move it out to a different function.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The 'mntDir' is part of 'struct mntent' as a result of getmntent_r
therefore we should not mangle with it.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Fixes:
https://www.redhat.com/archives/libvir-list/2017-January/msg00978.html
QEMU is probed through monitor fd to check capabilities during libvirtd init.
The monitor fd is closed after probing by virQEMUCapsInitQMPCommandFree
that calls virQEMUCapsInitQMPCommandAbort that calls qemuMonitorClose,
the latter one notifies the event loop via an interrupt handle in
qemuMonitorUnregister and after then closes monitor fd.
There could be a case when interrupt is sent after eventLoop is unlocked
but before virEventPollRunOnce blocks in poll, shortly before file
descriptor is closed by qemuMonitorClose. Then poll receives closed monitor
fd in fdset and returns EBADF.
EBADF is not mentioned as a valid errno on macOS poll man-page but such
behaviour can appear release-to-release, according to cpython:
https://github.com/python/cpython/blob/master/Modules/selectmodule.c#L1161
The change also fixes the issue in qemucapabilitiestest. It returns
Bad file descriptor message 25 times without the fix.
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In cases where virProcessKillPainfully already reailizes that
SIGTERM wasn't enough we are partially on a bad path already.
Maybe the system is overloaded or having serious trouble to free and
reap resources in time.
In those case give the SIGKILL that was sent after 10 seconds some more
time to take effect if force was set (only then we are falling back to
SIGKILL anyway).
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
It was found that in cases with host devices virProcessKillPainfully
might be able to send signal zero to the target PID for quite a while
with the process already being gone from /proc/<PID>.
That is due to cleanup and reset of devices which might include a
secondary bus reset that on top of the actions taken has a 1s delay
to let the bus settle. Due to that guests with plenty of Host devices
could easily exceed the default timeouts.
To solve that, this adds an extra delay of 2s per hostdev that is associated
to a VM.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Rather than forcing the caller to generate an error, let's
generate the Username or Password error message failure if
the auth->cb fails. This is the last error path that needs
a specific message for various callers.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
If we never find the valid credtype in the list, then we'd return
NULL without an error signaled forcing the caller to generate one
that will probably be incorrect. Let's be specific.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Now that the virAuthGet*Path helpers make the checks, we can remove
them from here.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Before trying to call @auth->cb, let's ensure it exists.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Before trying to dereference @auth, let's ensure it's valid.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Instead of adding the same check for every drivers, execute the checks
in virAuthGetUsername and virAuthGetPassword. These funtions are called
when user is not set in the URI.
Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Currently iohelper's error log is recorded in virFileWrapperFdClose.
However, if something goes wrong the caller might not even get to
calling virFileWrapperFdClose and call virFileWrapperFdFree
directly. Therefore the error reporting should happen there.
Signed-off-by: xinhua.Cao <caoxinhua@huawei.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
While in most cases the values are going to be much
smaller than our arbitrary 4096 limit, there is really
no guarantee that would be the case: in fact, a few
aarch64 servers have been spotted in the wild with
core_id as high as 6216.
Take advantage of virBitmap's ability to automatically
alter its size at runtime to accomodate such values.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
We already have a function which parses
thread_siblings_list for a CPU and returns the
corresponding bitmap, and a bunch of utility functions
that perform operations on bitmaps such as counting
the number of set bits: use those to implement the
function instead of having an additional ad-hoc parser
for thread_siblings.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Caused by commit f7d0663d49. The problem is missing libnl library on
these platforms, so the VIR_DEFINE_AUTOPTR_FUNC has to be compiled in
conditionally.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Add new XML section to report host's memory bandwidth allocation
capability. The format as below example:
<host>
.....
<memory_bandwidth>
<node id='0' cpus='0-19'>
<control granularity='10' min ='10' maxAllocs='8'/>
</node>
</memory_bandwidth>
</host>
granularity ---- granularity of memory bandwidth, unit percentage.
min ---- minimum memory bandwidth allowed, unit percentage.
maxAllocs ---- maximum memory bandwidth allocation group supported.
Signed-off-by: Bing Niu <bing.niu@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Introduce an API to allow setting of the MBA from domain XML.
Signed-off-by: Bing Niu <bing.niu@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Introduce an API that will traverse the memory bandwidth data calling
a callback function for each defined bandwidth entry.
Signed-off-by: Bing Niu <bing.niu@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Introduce virResctrlMemoryBandwidthSubtract and
virResctrlAllocMemoryBandwidth to be used as part of
the virResctrlAllocAssign processing to configure
the available memory bandwidth.
Signed-off-by: Bing Niu <bing.niu@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Introduce virResctrlAllocMemoryBandwidthFormat and
virResctrlAllocParseMemoryBandwidthLine which will format
and parse an entry in the schemata file for MBA.
Signed-off-by: Bing Niu <bing.niu@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Add memory bandwidth allocation support to virresctrl class.
Introducing virResctrlAllocMemBW which is used for allocating memory
bandwidth. Following virResctrlAllocPerType, it also employs a
nested sparse array to indicate whether allocation is available for
particular last level cache.
Signed-off-by: Bing Niu <bing.niu@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
If we have some membw_info data, then we need to calculate the number
of MBA controllers on the system. The value cannot be obtained from a
direct query to the RDT kernel module, but it is the same as the last
level cache value which is calculated by traversing the cache hierarchy
of host(/sys/bus/cpu/devices/cpuX/cache/).
Signed-off-by: Bing Niu <bing.niu@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Introducing virResctrlInfoMemBW for the information memory bandwidth
allocation information.
Signed-off-by: Bing Niu <bing.niu@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Refactor virResctrlAllocFormat so that it is easy to support other
resource allocation technologies.
Signed-off-by: Bing Niu <bing.niu@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Separate resctrl common information parts from CAT specific parts,
so that common information parts can be reused among different
resource allocation technologies.
Signed-off-by: Bing Niu <bing.niu@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Some functions in virresctrl are for CAT only, while some of other
functions are for resource allocation, not just CAT. So change
their names to reflect the reality.
Signed-off-by: Bing Niu <bing.niu@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
By making use of GNU C's cleanup attribute handled by the
VIR_AUTOPTR macro for declaring aggregate pointer variables,
majority of the calls to *Free functions can be dropped, which
in turn leads to getting rid of most of our cleanup sections.
Signed-off-by: Sukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
By making use of GNU C's cleanup attribute handled by the
VIR_AUTOPTR macro for declaring aggregate pointer variables,
majority of the calls to *Free functions can be dropped, which
in turn leads to getting rid of most of our cleanup sections.
Signed-off-by: Sukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
By making use of GNU C's cleanup attribute handled by the
VIR_AUTOPTR macro for declaring aggregate pointer variables,
majority of the calls to *Free functions can be dropped, which
in turn leads to getting rid of most of our cleanup sections.
Signed-off-by: Sukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
By making use of GNU C's cleanup attribute handled by the
VIR_AUTOFREE macro for declaring scalar variables, majority
of the VIR_FREE calls can be dropped, which in turn leads to
getting rid of most of our cleanup sections.
Signed-off-by: Sukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
By making use of GNU C's cleanup attribute handled by the
VIR_AUTOPTR macro for declaring aggregate pointer variables,
majority of the calls to *Free functions can be dropped, which
in turn leads to getting rid of most of our cleanup sections.
Signed-off-by: Sukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
By making use of GNU C's cleanup attribute handled by the
VIR_AUTOFREE macro for declaring scalar variables, majority
of the VIR_FREE calls can be dropped, which in turn leads to
getting rid of most of our cleanup sections.
Signed-off-by: Sukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Using the new VIR_DEFINE_AUTOPTR_FUNC macro defined in
src/util/viralloc.h, define a new wrapper around an existing
cleanup function which will be called when a variable declared
with VIR_AUTOPTR macro goes out of scope. Also, drop the redundant
viralloc.h include, since that has moved from the source module into
the header.
This commit also typedefs virNetlinkMsg to struct nl_msg type for use
with the cleanup macros.
When a variable of type virNetlinkMsg * is declared using VIR_AUTOPTR,
the function nlmsg_free will be run automatically on it when it
goes out of scope.
Signed-off-by: Sukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Add another usage for VIR_AUTOFREE macro which was left in the
commit ec3e878, thereby dropping a VIR_FREE call and and a cleanup
section.
Signed-off-by: Sukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This reverts commit 9cf38263d0.
Jansson cannot parse QEMU's quirky JSON.
Revert back to yajl.
https://bugzilla.redhat.com/show_bug.cgi?id=1614569
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This reverts commit bf114decb3.
Jansson cannot parse QEMU's quirky JSON.
Revert back to yajl.
https://bugzilla.redhat.com/show_bug.cgi?id=1614569
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This reverts commit 8f802c6d86.
Jansson cannot parse QEMU's quirky JSON.
Revert back to yajl.
https://bugzilla.redhat.com/show_bug.cgi?id=1614569
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This reverts commit ce3c6ef684.
Jansson cannot parse QEMU's quirky JSON.
Revert back to yajl.
https://bugzilla.redhat.com/show_bug.cgi?id=1614569
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This reverts commit 9e44c2db8a.
Jansson cannot parse QEMU's quirky JSON.
Revert back to yajl.
https://bugzilla.redhat.com/show_bug.cgi?id=1614569
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This reverts commit 5d40272ea6.
Jansson cannot parse QEMU's quirky JSON.
Revert back to yajl.
https://bugzilla.redhat.com/show_bug.cgi?id=1614569
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We are freeing the individual strings (which were filled by
virNetDevIPCheckIPv6ForwardingCallback()) but not the array
itself.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Commit <eaf2c9f89107b9f60cf8db2c919f78b987ff7177> moved machineName
generation before virCgroupNewDetectMachine() is called.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
There are few places where dlopen() is called. This call means we
have to link with DLOPEN_LIBS. However, instead of having each
final, installable library linking with it, move the directive to
the source that introduced the dependency.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
The same code would be used for storage pools and domain disks.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This structure will be reused by domain disk images as well.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Commits 7b706f33ac and 4acb7887e4 introduced some compound type *Free
wrappers in order to use them with VIR_DEFINE_AUTOPTR_FUNC. However,
since those were not used in the code right away, Clang complained about
unused functions (static ones that are defined by the macro above).
This patch puts the defined functions in use.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Technically, it was never used ever since commit @f4d06ca8fd9 introduced
it, but the fact that we called VIR_FREE on it was enough for Clang to
never complain about it.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
By making use of GNU C's cleanup attribute handled by the
VIR_AUTOPTR macro for declaring aggregate pointer variables,
majority of the calls to *Free functions can be dropped, which
in turn leads to getting rid of most of our cleanup sections.
Signed-off-by: Sukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
By making use of GNU C's cleanup attribute handled by the
VIR_AUTOFREE macro for declaring scalar variables, majority
of the VIR_FREE calls can be dropped, which in turn leads to
getting rid of most of our cleanup sections.
Signed-off-by: Sukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
By making use of GNU C's cleanup attribute handled by the
VIR_AUTOPTR macro for declaring aggregate pointer variables,
majority of the calls to *Free functions can be dropped, which
in turn leads to getting rid of most of our cleanup sections.
Signed-off-by: Sukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
By making use of GNU C's cleanup attribute handled by the
VIR_AUTOFREE macro for declaring scalar variables, majority
of the VIR_FREE calls can be dropped, which in turn leads to
getting rid of most of our cleanup sections.
Signed-off-by: Sukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
By making use of GNU C's cleanup attribute handled by the
VIR_AUTOFREE macro for declaring scalar variables, majority
of the VIR_FREE calls can be dropped, which in turn leads to
getting rid of most of our cleanup sections.
Signed-off-by: Sukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
By making use of GNU C's cleanup attribute handled by the
VIR_AUTOFREE macro for declaring scalar variables, majority
of the VIR_FREE calls can be dropped, which in turn leads to
getting rid of most of our cleanup sections.
Signed-off-by: Sukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Using the new VIR_DEFINE_AUTOPTR_FUNC macro defined in
src/util/viralloc.h, define a new wrapper around an existing
cleanup function which will be called when a variable declared
with VIR_AUTOPTR macro goes out of scope. Also, drop the redundant
viralloc.h include, since that has moved from the source module into
the header.
When a variable of type virPerfPtr is declared using VIR_AUTOPTR,
the function virPerfFree will be run automatically on it when it
goes out of scope.
This commit also adds an intermediate typedef for virPerf
type for use with the cleanup macros.
Signed-off-by: Sukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
By making use of GNU C's cleanup attribute handled by the
VIR_AUTOPTR macro for declaring aggregate pointer variables,
majority of the calls to *Free functions can be dropped, which
in turn leads to getting rid of most of our cleanup sections.
Signed-off-by: Sukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
By making use of GNU C's cleanup attribute handled by the
VIR_AUTOFREE macro for declaring scalar variables, majority
of the VIR_FREE calls can be dropped, which in turn leads to
getting rid of most of our cleanup sections.
Signed-off-by: Sukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Using the new VIR_DEFINE_AUTOPTR_FUNC macro defined in
src/util/viralloc.h, define a new wrapper around an existing
cleanup function which will be called when a variable declared
with VIR_AUTOPTR macro goes out of scope. Also, drop the redundant
viralloc.h include, since that has moved from the source module into
the header.
When a variable of type virNetlinkHandle * is declared using
VIR_AUTOPTR, the function virNetlinkFree will be run automatically
on it when it goes out of scope.
Signed-off-by: Sukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
By making use of GNU C's cleanup attribute handled by the
VIR_AUTOPTR macro for declaring aggregate pointer variables,
majority of the calls to *Free functions can be dropped, which
in turn leads to getting rid of most of our cleanup sections.
Signed-off-by: Sukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
By making use of GNU C's cleanup attribute handled by the
VIR_AUTOFREE macro for declaring scalar variables, majority
of the VIR_FREE calls can be dropped, which in turn leads to
getting rid of most of our cleanup sections.
Signed-off-by: Sukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
By making use of GNU C's cleanup attribute handled by the
VIR_AUTOFREE macro for declaring scalar variables, majority
of the VIR_FREE calls can be dropped, which in turn leads to
getting rid of most of our cleanup sections.
Signed-off-by: Sukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
By making use of GNU C's cleanup attribute handled by the
VIR_AUTOFREE macro for declaring scalar variables, majority
of the VIR_FREE calls can be dropped, which in turn leads to
getting rid of most of our cleanup sections.
Signed-off-by: Sukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
By making use of GNU C's cleanup attribute handled by the
VIR_AUTOPTR macro for declaring aggregate pointer variables,
majority of the calls to *Free functions can be dropped, which
in turn leads to getting rid of most of our cleanup sections.
Signed-off-by: Sukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
By making use of GNU C's cleanup attribute handled by the
VIR_AUTOFREE macro for declaring scalar variables, majority
of the VIR_FREE calls can be dropped, which in turn leads to
getting rid of most of our cleanup sections.
Signed-off-by: Sukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
By making use of GNU C's cleanup attribute handled by the
VIR_AUTOFREE macro for declaring scalar variables, majority
of the VIR_FREE calls can be dropped, which in turn leads to
getting rid of most of our cleanup sections.
Signed-off-by: Sukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Using the new VIR_DEFINE_AUTOPTR_FUNC macro defined in
src/util/viralloc.h, define a new wrapper around an existing
cleanup function which will be called when a variable declared
with VIR_AUTOPTR macro goes out of scope. Also, drop the redundant
viralloc.h include, since that has moved from the source module into
the header.
When variables of type virNetDevIPAddrPtr and virNetDevIPRoutePtr
are declared using VIR_AUTOPTR, the functions virNetDevIPAddrFree
and virNetDevIPRouteFree, respectively, will be run
automatically on them when they go out of scope.
Signed-off-by: Sukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This will not only help us in the future when adding more and more
VIR_AUTOPTR instances, we're also consistent in that a compound type
gets its own function which can easily be extended in the future if
necessary.
Signed-off-by: Sukrit Bhatnagar <skrtbhtngr@gmail.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
By making use of GNU C's cleanup attribute handled by the
VIR_AUTOFREE macro for declaring scalar variables, majority
of the VIR_FREE calls can be dropped, which in turn leads to
getting rid of most of our cleanup sections.
Signed-off-by: Sukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Using the new VIR_DEFINE_AUTOPTR_FUNC macro defined in
src/util/viralloc.h, define a new wrapper around an existing
cleanup function which will be called when a variable declared
with VIR_AUTOPTR macro goes out of scope. Also, drop the redundant
viralloc.h include, since that has moved from the source module into
the header.
When a variable of type virSocketAddrPtr is declared using
VIR_AUTOPTR, the function virSocketAddrFree will be run
automatically on it when it goes out of scope.
Signed-off-by: Sukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This will not only help us in the future when adding more and more
VIR_AUTOPTR instances, we're also consistent in that a compound type
gets its own function which can easily be extended in the future if
necessary.
Signed-off-by: Sukrit Bhatnagar <skrtbhtngr@gmail.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Using the new VIR_DEFINE_AUTOPTR_FUNC macro defined in
src/util/viralloc.h, define a new wrapper around an existing
cleanup function which will be called when a variable declared
with VIR_AUTOPTR macro goes out of scope. Also, drop the redundant
viralloc.h include, since that has moved from the source module into
the header.
When variables of type virNetDevRxFilterPtr and virNetDevMcastEntryPtr
are declared using VIR_AUTOPTR, the functions virNetDevRxFilterFree
and virNetDevMcastEntryFree, respectively, will be run
automatically on them when they go out of scope.
Signed-off-by: Sukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Using the new VIR_DEFINE_AUTOPTR_FUNC macro defined in
src/util/viralloc.h, define a new wrapper around an existing
cleanup function which will be called when a variable declared
with VIR_AUTOPTR macro goes out of scope. Also, drop the redundant
viralloc.h include, since that has moved from the source module into
the header.
When a variable of type virMacAddrPtr is declared using VIR_AUTOPTR,
the function virMacAddrFree will be run automatically on it when it
goes out of scope.
Signed-off-by: Sukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This will not only help us in the future when adding more and more
VIR_AUTOPTR instances, we're also consistent in that a compound type
gets its own function which can easily be extended in the future if
necessary.
Signed-off-by: Sukrit Bhatnagar <skrtbhtngr@gmail.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
By making use of GNU C's cleanup attribute handled by the
VIR_AUTOPTR macro for declaring aggregate pointer variables,
majority of the calls to *Free functions can be dropped, which
in turn leads to getting rid of most of our cleanup sections.
Signed-off-by: Sukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
By making use of GNU C's cleanup attribute handled by the
VIR_AUTOFREE macro for declaring scalar variables, majority
of the VIR_FREE calls can be dropped, which in turn leads to
getting rid of most of our cleanup sections.
Signed-off-by: Sukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
If nbits is 64 (or greater) then shifting 1ULL left is undefined.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
In virStorageBackendCreateIfaceIQN() the virRandomBits() is
called in order to use random bits to generate random name for
new interface. However, virAsprintf() is expecting 32 bits and we
are requesting only 30.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Pino Toscano <ptoscano@redhat.com>
The function is supposed to return up to 64bit long integer. In
order to do that it calls virRandomBytes() to fill the integer
with random bytes and then masks out everything but requested
bits. However, when doing that it shifts 1U and not 1ULL. So
effectively, requesting 32 random bis or more always return 0
which is not random enough.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Pino Toscano <ptoscano@redhat.com>
The jansson and json-glib libraries both export symbols with a json_
name prefix and json_object_iter_next() clashes between them.
Unfortunately json-glib is linked in by GTK, so any app using GTK and
libvirt will get a clash, resulting in SEGV. This also affects the NSS
module provided by libvirt
Instead of directly linking to jansson, use dlopen() with the RTLD_LOCAL
flag which allows us to hide the symbols from the application that loads
libvirt or the NSS module.
Some preprocessor black magic and wrapper functions are used to redirect
calls into the dlopen resolved symbols.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This reverts commit 0f80c71822.
Turns out, our code relies on virCgroupFree(&var) setting
var = NULL.
Conflicts:
src/util/vircgroup.c: context because 94f1855f09 is not
reverted.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This reverts commit 4da4a9fe0c.
Turns out, our code relies on virCgroupFree(&var) setting
var = NULL.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This reverts commit dd47145aaa.
Turns out, our code relies on virCgroupFree(&var) setting
var = NULL.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
After some recent patches, clang is throwing some errors related to
unused variables. This is not happening when we use GCC with -Werror
enabled. Only clang reports this warning.
make[3]: Entering directory '/home/julio/Desktop/virt/libvirt/src'
CC util/libvirt_util_la-virscsivhost.lo
CC util/libvirt_util_la-virusb.lo
CC util/libvirt_util_la-virmdev.lo
util/virmdev.c:373:36: error: unused variable 'ret' [-Werror,-Wunused-variable]
VIR_AUTOPTR(virMediatedDevice) ret = virMediatedDeviceListSteal(list, dev);
^
1 error generated.
Makefile:11579: recipe for target 'util/libvirt_util_la-virmdev.lo' failed
make[3]: *** [util/libvirt_util_la-virmdev.lo] Error 1
make[3]: *** Waiting for unfinished jobs....
util/virscsivhost.c:112:37: error: unused variable 'tmp' [-Werror,-Wunused-variable]
VIR_AUTOPTR(virSCSIVHostDevice) tmp = virSCSIVHostDeviceListSteal(list, dev);
^
1 error generated.
Makefile:11411: recipe for target 'util/libvirt_util_la-virscsivhost.lo' failed
make[3]: *** [util/libvirt_util_la-virscsivhost.lo] Error 1
util/virusb.c:511:31: error: unused variable 'ret' [-Werror,-Wunused-variable]
VIR_AUTOPTR(virUSBDevice) ret = virUSBDeviceListSteal(list, dev);
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
So after 00dc991ca1 the function is one line long and the
line is declaring a variable which is never used in fact. Replace
it with actual free() call instead of autofree.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
By making use of GNU C's cleanup attribute handled by the
VIR_AUTOPTR macro for declaring aggregate pointer variables,
majority of the calls to *Free functions can be dropped, which
in turn leads to getting rid of most of our cleanup sections.
Signed-off-by: Sukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
By making use of GNU C's cleanup attribute handled by the
VIR_AUTOFREE macro for declaring scalar variables, majority
of the VIR_FREE calls can be dropped, which in turn leads to
getting rid of most of our cleanup sections.
Signed-off-by: Sukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
By making use of GNU C's cleanup attribute handled by the
VIR_AUTOPTR macro for declaring aggregate pointer variables,
majority of the calls to *Free functions can be dropped, which
in turn leads to getting rid of most of our cleanup sections.
Signed-off-by: Sukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
By making use of GNU C's cleanup attribute handled by the
VIR_AUTOFREE macro for declaring scalar variables, majority
of the VIR_FREE calls can be dropped, which in turn leads to
getting rid of most of our cleanup sections.
Signed-off-by: Sukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
By making use of GNU C's cleanup attribute handled by the
VIR_AUTOFREE macro for declaring scalar variables, majority
of the VIR_FREE calls can be dropped, which in turn leads to
getting rid of most of our cleanup sections.
Signed-off-by: Sukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
By making use of GNU C's cleanup attribute handled by the
VIR_AUTOFREE macro for declaring scalar variables, majority
of the VIR_FREE calls can be dropped, which in turn leads to
getting rid of most of our cleanup sections.
Signed-off-by: Sukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
By making use of GNU C's cleanup attribute handled by the
VIR_AUTOPTR macro for declaring aggregate pointer variables,
majority of the calls to *Free functions can be dropped, which
in turn leads to getting rid of most of our cleanup sections.
Signed-off-by: Sukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
By making use of GNU C's cleanup attribute handled by the
VIR_AUTOFREE macro for declaring scalar variables, majority
of the VIR_FREE calls can be dropped, which in turn leads to
getting rid of most of our cleanup sections.
Signed-off-by: Sukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Using the new VIR_DEFINE_AUTOPTR_FUNC macro defined in
src/util/viralloc.h, define a new wrapper around an existing
cleanup function which will be called when a variable declared
with VIR_AUTOPTR macro goes out of scope. Also, drop the redundant
viralloc.h include, since that has moved from the source module into
the header.
When a variable of type virNetDevVlanPtr is declared using
VIR_AUTOPTR, the function virNetDevVlanFree will be run
automatically on it when it goes out of scope.
Signed-off-by: Sukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
By making use of GNU C's cleanup attribute handled by the
VIR_AUTOPTR macro for declaring aggregate pointer variables,
majority of the calls to *Free functions can be dropped, which
in turn leads to getting rid of most of our cleanup sections.
Signed-off-by: Sukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Using the new VIR_DEFINE_AUTOPTR_FUNC macro defined in
src/util/viralloc.h, define a new wrapper around an existing
cleanup function which will be called when a variable declared
with VIR_AUTOPTR macro goes out of scope. Also, drop the redundant
viralloc.h include, since that has moved from the source module into
the header.
When a variable of type virSCSIVHostDevicePtr is declared using
VIR_AUTOPTR, the function virSCSIVHostDeviceFree will be run
automatically on it when it goes out of scope.
Signed-off-by: Sukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
By making use of GNU C's cleanup attribute handled by the
VIR_AUTOPTR macro for declaring aggregate pointer variables,
majority of the calls to *Free functions can be dropped, which
in turn leads to getting rid of most of our cleanup sections.
Signed-off-by: Sukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
By making use of GNU C's cleanup attribute handled by the
VIR_AUTOFREE macro for declaring scalar variables, majority
of the VIR_FREE calls can be dropped, which in turn leads to
getting rid of most of our cleanup sections.
Signed-off-by: Sukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Using the new VIR_DEFINE_AUTOPTR_FUNC macro defined in
src/util/viralloc.h, define a new wrapper around an existing
cleanup function which will be called when a variable declared
with VIR_AUTOPTR macro goes out of scope. Also, drop the redundant
viralloc.h include, since that has moved from the source module into
the header.
When variables of type virSCSIDevicePtr and virUsedByInfoPtr
are declared using VIR_AUTOPTR, the functions virSCSIDeviceFree
and virSCSIDeviceUsedByInfoFree, respectively, will be run
automatically on them when they go out of scope.
This commit also adds an intermediate typedef for virUsedByInfo
type for use with the cleanup macros.
Signed-off-by: Sukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
By making use of GNU C's cleanup attribute handled by the
VIR_AUTOPTR macro for declaring aggregate pointer variables,
majority of the calls to *Free functions can be dropped, which
in turn leads to getting rid of most of our cleanup sections.
Signed-off-by: Sukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
By making use of GNU C's cleanup attribute handled by the
VIR_AUTOFREE macro for declaring scalar variables, majority
of the VIR_FREE calls can be dropped, which in turn leads to
getting rid of most of our cleanup sections.
Signed-off-by: Sukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Using the new VIR_DEFINE_AUTOPTR_FUNC macro defined in
src/util/viralloc.h, define a new wrapper around an existing
cleanup function which will be called when a variable declared
with VIR_AUTOPTR macro goes out of scope. Also, drop the redundant
viralloc.h include, since that has moved from the source module into
the header.
When a variable of type virUSBDevicePtr is declared using
VIR_AUTOPTR, the function virUSBDeviceFree will be run
automatically on it when it goes out of scope.
Signed-off-by: Sukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Modify virUSBDeviceListAdd to take a double pointer to
virUSBDevicePtr as the second argument. This will enable usage
of cleanup macros upon the virUSBDevicePtr item which is to be
added to the list as it will be cleared by virInsertElementsN
upon success.
Signed-off-by: Sukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
By making use of GNU C's cleanup attribute handled by the
VIR_AUTOPTR macro for declaring aggregate pointer variables,
majority of the calls to *Free functions can be dropped, which
in turn leads to getting rid of most of our cleanup sections.
Signed-off-by: Sukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
By making use of GNU C's cleanup attribute handled by the
VIR_AUTOFREE macro for declaring scalar variables, majority
of the VIR_FREE calls can be dropped, which in turn leads to
getting rid of most of our cleanup sections.
Signed-off-by: Sukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Using the new VIR_DEFINE_AUTOPTR_FUNC macro defined in
src/util/viralloc.h, define a new wrapper around an existing
cleanup function which will be called when a variable declared
with VIR_AUTOPTR macro goes out of scope. Also, drop the redundant
viralloc.h include, since that has moved from the source module into
the header.
When variables of types virPCIDevicePtr, virPCIDeviceAddressPtr
and virPCIEDeviceInfoPtr are declared using VIR_AUTOPTR, the functions
virPCIDeviceFree, virPCIDeviceAddressFree and virPCIEDeviceInfoFree,
respectively, will be run automatically on them when they go out of scope.
Signed-off-by: Sukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
By making use of GNU C's cleanup attribute handled by the
VIR_AUTOPTR macro for declaring aggregate pointer variables,
majority of the calls to *Free functions can be dropped, which
in turn leads to getting rid of most of our cleanup sections.
Signed-off-by: Sukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
By making use of GNU C's cleanup attribute handled by the
VIR_AUTOFREE macro for declaring scalar variables, majority
of the VIR_FREE calls can be dropped, which in turn leads to
getting rid of most of our cleanup sections.
Signed-off-by: Sukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
By making use of GNU C's cleanup attribute handled by the
VIR_AUTOPTR macro for declaring aggregate pointer variables,
majority of the calls to *Free functions can be dropped, which
in turn leads to getting rid of most of our cleanup sections.
Signed-off-by: Sukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
By making use of GNU C's cleanup attribute handled by the
VIR_AUTOFREE macro for declaring scalar variables, majority
of the VIR_FREE calls can be dropped, which in turn leads to
getting rid of most of our cleanup sections.
Signed-off-by: Sukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Using the new VIR_DEFINE_AUTOPTR_FUNC macro defined in
src/util/viralloc.h, define a new wrapper around an existing
cleanup function which will be called when a variable declared
with VIR_AUTOPTR macro goes out of scope. Also, drop the redundant
viralloc.h include, since that has moved from the source module into
the header.
When a variable of type virFirewallPtr is declared using
VIR_AUTOPTR, the function virFirewallFree will be run
automatically on it when it goes out of scope.
Signed-off-by: Sukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
By making use of GNU C's cleanup attribute handled by the
VIR_AUTOPTR macro for declaring aggregate pointer variables,
majority of the calls to *Free functions can be dropped, which
in turn leads to getting rid of most of our cleanup sections.
Signed-off-by: Sukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
By making use of GNU C's cleanup attribute handled by the
VIR_AUTOFREE macro for declaring scalar variables, majority
of the VIR_FREE calls can be dropped, which in turn leads to
getting rid of most of our cleanup sections.
Signed-off-by: Sukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Using the new VIR_DEFINE_AUTOPTR_FUNC macro defined in
src/util/viralloc.h, define a new wrapper around an existing
cleanup function which will be called when a variable declared
with VIR_AUTOPTR macro goes out of scope. Also, drop the redundant
viralloc.h include, since that has moved from the source module into
the header.
When variables of type virMediatedDevicePtr and virMediatedDeviceTypePtr
are declared using VIR_AUTOPTR, the functions virMediatedDeviceFree
and virMediatedDeviceTypeFree, respectively, will be run automatically
on them when they go out of scope.
Signed-off-by: Sukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
By making use of GNU C's cleanup attribute handled by the
VIR_AUTOPTR macro for declaring aggregate pointer variables,
majority of the calls to *Free functions can be dropped, which
in turn leads to getting rid of most of our cleanup sections.
Signed-off-by: Sukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
