VM XML accepts target.port but this does not get passed while
building the QEMU command line for this VM.
Signed-off-by: Divya Garg <divya.garg@nutanix.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This commit takes care of following cases:
-> Check availability of requested ports.
->The total number of requested ports should not be more than
VIR_MAX_ISA_SERIAL_PORTS.
->The ports requested should be less than VIR_MAX_ISA_SERIAL_PORTS.
->VIR_MAX_ISA_SERIAL_PORTS should correspond to MAX_ISA_SERIAL_PORTS
specified in QEMU code commit def337ffda34d331404bd7f1a42726b71500df22.
-> Prevent duplicate device assignments to the same port.
-> In case no ports are provided in the XML, this patch scans the list of unused
isa-serial indices to automatically assign available ports for this VM.
Signed-off-by: Divya Garg <divya.garg@nutanix.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
These changes make the g_auto-ification in the next commit clearer.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
While sections are somewhat loosely defined and thus the choice
is not quite a clear-cut one, section 8 might be a slightly
better fit in this case.
Suggested-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a sentence to the active_pcr_banks node documentation that clarifies
that when the active_pcr_banks node is removed from the XML or when it
is omitted that the set of active PCR banks is not changed anymore.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2039246
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Commit f4aae9726d factored out the snapshot redefinition code into a
separate function, but didn't account for the fact that the code is
consuming the reference to the snapshot definition and by moving the
code away the caller (qemuSnapshotCreateXML) now frees the definition
which didn't happen before as we cleared the pointer.
Fix it by increasing the reference locally. Later patches will refactor
the code so that it's more obvious what's happening.
Fixes: f4aae9726d
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2039651
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'def' is commonly used to refer to domain definition. Most of the
snapshot code uses 'snapdef' for the snapshot definition.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Our approach to snapshots without metadata was to insert them to the
snapshot list and then later remove them from the list when the flag is
present.
This quirky logic was broken in a recent refactor of the snapshot code
causing that the snapshot stayed inserted in the snapshot list.
Recent refactor of the snapshot code didn't faithfully relocate this
logic to the new function.
Rather than attempting to restore the quirky logic of adding and then
removing the object, don't add the snapshot into the list at all when
the user doesn't want metadata.
We achieve this by creating a temporary 'virDomainMomentObj' wrapper
which is not inserted into the list and using that instead of calling
virDomainSnapshotAssignDef.
Fixes: 9bad0fb809
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2039131
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Export 'virDomainMomentObjNew' and 'virDomainMomentObjFree' and define
the latter as autoptr cleanup function for 'virDomainMomentObj'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Format the function prototypes the same way as in the .c file.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/
Co-authored-by: Weblate <noreply@weblate.org>
Signed-off-by: Fedora Weblate Translation <i18n@lists.fedoraproject.org>
Currently virProcessGetStatInfo() always returns success and only logs error
when it is unable to parse the data. Make this function actually report the
error and return a negative value in this error scenario.
Fix the callers so that they do not override the error generated.
Also fix non-linux implementation of this function so as to report error.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Meson reports
WARNING: pkgconfig variable 'cflags' not defined for dependency yajl.
which makes sense, because "cflags" is not one of the variables
reported by
$ pkg-config --print-variables yajl
and
$ pkg-config --variable=cflags yajl
doesn't work either.
The breakage was introduced when we switched from calling
pkg-config directly to using get_pkgconfig_variable() in 7.5.0
and, somehow, it went undetected until now.
Use "includedir", which is a proper pkg-config variable,
instead.
Fixes: c32c5ca29a
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
When -device is configured via JSON a bug [1] is triggered in qemu were
the DEVICE_DELETED event for the removal of the device frontend is no
longer delivered to libvirt. Without the DEVICE_DELETED event we don't
remove the corresponding entries in the VM XML.
Until qemu will be fixed we must stop using the JSON syntax for -device.
This patch removes the detection of the capability. The capability is
used only during startup of a fresh VM so we don't need to consider any
compaitibility steps for existing VMs.
For users who wish to use 'libvirt-7.9' and 'libvirt-7.10' with
'qemu-6.2' there are two possible workarounds:
- filter out the 'device.json' qemu capability '/etc/libvirt/qemu.conf':
capability_filters = [ "device.json" ]
- filter out the 'device.json' qemu capability via qemu namespace XML:
<domain type='kvm' xmlns:qemu='http://libvirt.org/schemas/domain/qemu/1.0'>
[...]
<qemu:capabilities>
<qemu:del capability='device.json'/>
</qemu:capabilities>
</domain>
We must never again use the same capability name as we are now
instructing users to filter it as a workaround so once qemu is fixed
we'll need to pick a new capability value for it.
[1] https://bugzilla.redhat.com/show_bug.cgi?id=2036669
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2035237
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We don't usually provide manual pages for internal tools,
but in the case of virt-ssh-helper the command is installed
inside the default $PATH and so it's likely that the user
will stumble upon it by using the shell's completion feature
when invoking another virt-* command, which makes it a good
idea to provide at least a minimal manual page.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virConnectOpenAuth() calls virConnectOpenInternal(). This later function
generates fine grained errors arising from various failure conditions that are
more accurate than a "catch all" broader VIR_ERR_OPERATION_FAILED error that
the callers of this function generates. Remove the broader error so that more
specific errors can be caught and processed.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There are a few glib functions that abort on OOM and thus there's
no point in checking their retval against NULL. Nevertheless, we
do have those checks in a few places. Remove them.
Generated using the following spatch:
@@
expression x;
identifier n;
expression r;
@@
(
x = g_strdup_printf(...);
| x = g_strdup_vprintf(...);
| x = g_strdup(...);
| x = g_strndup(...);
| x = g_new0(...);
| x = g_realloc(...);
)
... when != x
- if(!x)
(
- return r;
|
- goto n;
)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Both virProcessGetStatInfo() and virProcessGetSchedInfo() are
Linux centric. Provide stubs for non-Linux platforms.
Fixes: d73852c499
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Until now we did 2 weird things when inserting the qemuCaps used for
individual test cases into the capability cache:
1) we inserted the same caps for all emulators
2) we always (expensively) copied them
Now when real capabilities are used we don't touch them at all just
simply inser them. This allows us one big optimization, by trading a
copy for just a virObjectRef as we can borrow the caps object to the
cache.
For fake caps we still copy them as we insert the fake machine types
into them, but second big optimization is to insert the capabilities
only for the architecture they belong to.
Additionally this commit also ensures that all other entries in the
cache for the binary are poisoned by empty caps so that it's obvious
that the test is doing the right thing.
Apart from this making actually more sense this shaves off more than 40%
of runtime from qemuxml2argvtest.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Emulator binary change is needed to use the latest caps properly. The
comment is no longer needed, the expected error is recorded in the 'err'
file.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Also ensure that the emulator and architecture are correct for
DO_TEST_CAPS_LATEST.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As demonstrated by the qemuxml2xmltest DO_TEST_CAPS_LATEST data based on
the 'x86-kvm-32-on-64' test case the post parse CPU selection code which
fills in the CPU into the definition does not have exactly the same
logic as we used to have when the cpu model was picked when formatting
the commandline.
Change the qemuxml2argv test to use DO_TEST_CAPS_LATEST too as it
doesn't really make sense to test this on fake data.
In addition to 'latest' versions, this also adds second invocation
locked to qemu-4.1.0 which demonstrates the old behaviour.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
