The 'guestinfo' command uses the new virDomainGetGuestInfo() API to
query information about the specified domain and print it out for the
user. The output is modeled roughly on the 'domstats' command.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit f15789ec added support for setting postcopy migration bandwidth to
the migrate subcommand. This change does the same for precopy migration.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Currently, the way we format PCI address is using printf-s
precision, e.g. "%.4x". This works if we don't want to print any
value outside of bounds (which is usually the case). However,
turns out, PCI domain can be 0x10000 which doesn't work well with
our format strings. However, if we change the format string to
"%04x" then we still pad small values with zeroes but also we are
able to print values that are larger than four digits. In fact,
this format string used by kernel to print a PCI address:
"%04x:%02x:%02x.%d"
The other three format strings (for bus, device and function) are
changed too, so that we use the same format string as kernel.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce a bunch of new virsh commands for managing checkpoints in
isolation. More commands are needed for performing incremental
backups, but these commands were easy to implement by modeling heavily
after virsh-snapshot.c. There is no need for checkpoint-revert or
checkpoint-current since those snapshot APIs have no checkpoint
counterpart. Similarly, it is not necessary to change which
checkpoint is current when redefining from XML, since until we
integrate checkpoints with snapshots, there is only a linear chain
(and you can deduce the current checkpoint by instead using
'checkpoint-list --leaves'). Other aspects of checkpoint-list are
also a bit simpler than the snapshot counterpart, in part because we
don't have to cater to back-compat to older API.
Upcoming patches will test these interfaces once the test driver
supports checkpoints.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Ever since --parallel-connections option for virsh migrate was
introduced we did not properly check the return value of
vshCommandOptInt. We would set VIR_MIGRATE_PARAM_PARALLEL_CONNECTIONS
parameter even if vshCommandOptInt returned 0 (which means
--parallel-connections was not specified) when another int option which
was checked earlier was specified with a nonzero value.
Specifically, running virsh migrate with either
--auto-converge-increment, --auto-converge-initial, --comp-mt-dthreads,
--comp-mt-threads, or --comp-mt-level would set
VIR_MIGRATE_PARAM_PARALLEL_CONNECTIONS parameter and if --parallel
option was not used, libvirt would complain
error: invalid argument: Turn parallel migration on to tune it
even though --parallel-connections option was not used at all.
https://bugzilla.redhat.com/show_bug.cgi?id=1726643
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The old flag name confused some users into thinking it's the correct way
to undefine a VM with libvirt (not storage volume) snapshots.
The correct flag in that case is way less obvious: --snapshots-metadata.
Rename the flag (by adding an alias) to something which will promote
looking up the actual purpose of the flag.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
ACKed-by: Eric Blake <eblake@redhat.com>
Reword the end of the help string to make it more obvious that the VM
must be inactive.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
ACKed-by: Eric Blake <eblake@redhat.com>
Apparently "allow(s) to frobnicate" is not correct English, and
either "allow(s) one to frobnicate" or "allow(s) frobnicating"
should be used instead.
Spotted by Lintian (spelling-error-in-{binary,manpage} tags).
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Standardize on putting the _LAST enum value on the second line
of VIR_ENUM_IMPL invocations. Later patches that add string labels
to VIR_ENUM_IMPL will push most of these to the second line anyways,
so this saves some noise.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This completer is used to offer shutdown/reboot modes.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
virutil.(c|h) is a very gross collection of random code. Remove the enum
handlers from there so we can limit the scope where virtutil.h is used.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Although it is not needed at the moment, do not rely on a value being
set before the first jump to cleanup.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Use a temporary 'rc' variable to avoid comparing signed
and unsigned integers in the cleanup section.
Bug introduced by commit 3072ded which added the comparison against
the unsigned 'i'.
Also make niothreads size_t to mark that it should be unsigned.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Instead of using niothreads which defaults to zero, use the common
pattern with a ret varaible set to true just before the cleanup label.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Ever since the introduction of the guest-get-fsinfo command
in QEMU commit 46d4c572 qga/qapi-schema.json says that
the 'disks' array can possibly be empty. For example when getting
the target list is unsupported:
https://bugzilla.redhat.com/show_bug.cgi?id=1567041
Pass an empty string instead of NULL to vshTableRowAppend to prevent
a mismatched column number.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Use vshPrintExtra to report this message. It is a human-readable
explanation rather than an error.
Also, it is a very special system that runs with no filesystems.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Failing to print the table is also a reason to return failure
and print the reported error.
Switch to the usual pattern where we fall through the cleanup
label right after setting ret to true instead of infering the
return value from the number of filesystems returned.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Do not use 'ret' throughout the whole function to avoid confusion
and comparison of unsigned 'i' against signed 'ret'.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Missing semicolon at the end of macros can confuse some analyzers
(like cppcheck <filename>), and we have a mix of semicolon and
non-semicolon usage through the code. Let's standardize on using
a semicolon for VIR_ENUM_IMPL calls.
Move the verify() statement to the end of the macro and drop
the semicolon, so the compiler will require callers to add a
semicolon.
While we are touching these call sites, standardize on putting
the closing parenth on its own line, as discussed here:
https://www.redhat.com/archives/libvir-list/2019-January/msg00750.html
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Missing semicolon at the end of macros can confuse some analyzers
(like cppcheck <filename>), and we have a mix of semicolon and
non-semicolon usage through the code. Let's standardize on using
a semicolon for VIR_ENUM_DECL calls.
Drop the semicolon from the final statement of the macro, so
the compiler will require callers to add a semicolon.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
We have this very handy macro called VIR_STEAL_PTR() which steals
one pointer into the other and sets the other to NULL. The
following coccinelle patch was used to create this commit:
@ rule1 @
identifier a, b;
@@
- b = a;
...
- a = NULL;
+ VIR_STEAL_PTR(b, a);
Some places were clean up afterwards to make syntax-check happy
(e.g. some curly braces were removed where the body become a one
liner).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
In 600462834f we've tried to remove Author(s): lines
from comments at the beginning of our source files. Well, in some
files while we removed the "Author" line we did not remove the
actual list of authors.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Commit 3072ded3 changed the waya to format the vcpu pinning info
and forget to get cpumap for each vcpu during the loop, that cause
vcpupin command will display vcpu 0 info for other vcpus.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
QEMU can report how many times during post-copy migration the domain
running on the destination host tried to access a page which has not
been migrated yet.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a command to allow for setting various dynamic IOThread polling
interval scope (poll-max-ns, poll-grow, and poll-shrink). Describe
the values in the virsh.pod in as generic terms as possible. The
more specific QEMU algorithm has been divulged in the previous patch.
Based heavily on code originally posted by Pavel Hrdina
<phrdina@redhat.com>, but altered to only provide one command
and to not managed a poll disabled state.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
The domxml-to-native virsh command accepts either --xml or --domain
option followed by a file or domain name respectively. The --domain
option is documented as required, which means an argument with no option
is treated as --xml. Commit v4.3.0-127-gd86531daf2 broke this by making
--domain optional and thus an argument with no option was treated as
--domain.
https://bugzilla.redhat.com/show_bug.cgi?id=1633077
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
We're passing size_t but using format for unsigned long.
Introduced in latest vshTable rework patches.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add --alias to support custom alias in virsh attach-interface.
Signed-off-by: Han Han <hhan@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add --alias to support custom disk alias in virsh attach-disk.
Signed-off-by: Han Han <hhan@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
After you go through command mentioned above, completer
finds what state the device is currently in, and suggests
an opposite state.
Signed-off-by: Simon Kobyda <skobyda@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Adding sata bus address support to the optional address parameter of virsh
attach-disk. The address is used as controller.bus.unit. e.g.
sata:0.0.0
Signed-off-by: Han Han <hhan@redhat.com>
Adding usb bus address support to the optional address parameter
of virsh attach-disk. The address is used as bus:port. e.g. usb:1:1.
Signed-off-by: Han Han <hhan@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Replace instances where we previously called virGetLastError just to
either get the code or to check if an error exists with
virGetLastErrorCode to avoid a validity pre-check.
Signed-off-by: Ramy Elkest <ramyelkest@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Similarly to cpu-models these two commands do not operate on a domain
and should be listed in the "Host and Hypervisor" commands section.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The next patch will use it in virsh-completer.c for returning the
strings of domain event name. At the same time, rename it to
avoid possible name clashing.
Signed-off-by: Lin Ma <lma@suse.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
centralize the definition of macro VIRSH_COMMON_OPT_DOMAIN_FULL to virsh.h
to avoid unnecessary duplicated definition
Signed-off-by: Lin Ma <lma@suse.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This time around it's not enough to just pick the latest commit,
because with aed87bb2aa6ed83b49574eb982e3bdd4c36acf17 keycodemapdb
renamed the 'rfb' keycode to 'qnum' and we need to accept the new
name while maintaining backwards compatibility.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The variable names for the options and information about a command
should have an underscore in places where the virsh command has a
hyphen. The function callback name should capitalize the letter after
the hyphen. This was not used in 'blockcommit', 'blockcopy', 'blockjob',
'blockpull', and 'blockresize' commands.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Previously we've removed the data only in virshUpdateDiskXML when
changing the disk source for the CDROM since the backing store would be
invalid. Move the code into a separate function and callit from
virshFindDisk which is also used when detaching disk.
The detaching code does not necessarily need to get the full backing
chain since it will need to act on the one managed by libvirt anyways
and this also takes care of problems when parts of the backing store
were invalid due to buggy RBD detection code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Similarly to other commands add an argument which allows to check the
XML which would be used to execute the operation instead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
For given domain fetch list of defined interfaces. This can be
used for commands like domif-getlink and others. If available,
the interface name is returned (e.g. "vnet0", usually available
only for running domains), if not the MAC address is returned.
Moreover, the detach-interface command requires only MAC address
and therefore we have new flag that forces the completer to
return just the MAC address.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Now that we have everything prepared let the fun begin. This
completer is very simple and returns domain names. Moreover,
depending on the command it can return just a subset of domains
(e.g. only running/paused/transient/.. ones).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
It is literally only a wrapper around virBitmapNewData() and
virBitmapFormat(), only the naming was wrong since it was introduced.
And because we have virBitmap*String functions where the meaning of
the 'String' is constant, this might confuse someone.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The 'set-lifcycle-action' is throwing a weird error after executing it with
the '--help' option. The command output is showing the options 'type' and
'action' are as optional, but they aren't. Both are required.
virsh # set-lifecycle-action --help
...
SYNOPSIS
set-lifecycle-action <domain> [--type <string>] [--action <string>] ...
...
OPTIONS
[--domain] <string> domain name, id or uuid
error: internal error: bad options in command: 'set-lifecycle-action'
After applying this patch, both arguments are required now.
virsh # set-lifecycle-action --help
...
SYNOPSIS
set-lifecycle-action <domain> <type> <action> [--config] ...
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1509870
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
In some cases there's dangling backward slash at the end of multi
line macros. While technically the code works, it will stop if
some empty lines are removed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Right-aligning backslashes when defining macros or using complex
commands in Makefiles looks cute, but as soon as any changes is
required to the code you end up with either distractingly broken
alignment or unnecessarily big diffs where most of the changes
are just pushing all backslashes a few characters to one side.
Generated using
$ git grep -El '[[:blank:]][[:blank:]]\\$' | \
grep -E '*\.([chx]|am|mk)$$' | \
while read f; do \
sed -Ei 's/[[:blank:]]*[[:blank:]]\\$/ \\/g' "$f"; \
done
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Commit fdeac7a05f tried to fix the output
of 'virsh domxml-to-native --help' by switching types around. One of the
changes broke the option parser. VSH_OT_ARGV should be used only for
variable argument count, not to make the help generator look pretty.
The correct option type in this case is VSH_OT_STRING as it's not
mandatory now since it can be substituted by using --domain.
This makes --help for this command look incorrect, but the parser works
as it should.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1494400
The command "info migrate" of qemu outputs the dirty-pages-rate during
migration, but page size is different in different architectures. So
page size should be output to calculate dirty pages in bytes.
Page size is already implemented with commit
030ce1f8612215fcbe9d353dfeaeb2937f8e3f94 in qemu.
Now Implement the counter-part in libvirt.
Signed-off-by: Chao Fan <fanc.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Requesting an automated switch to a post-copy migration (using
--timeout-postcopy) without actually enabling post-copy migration (using
--postcopy) doesn't really do anything. Let's make this dependency
explicit to avoid unexpected behavior.
https://bugzilla.redhat.com/show_bug.cgi?id=1455023
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
A variable named 'socket' clashes with the function of the same
name, causing build failures due to warnings on some platforms.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This commit adds the unix socket URL support to 'domdisplay' command.
Before, even if an user was using unix socket to define a spice graphics,
the command 'domdisplay' showed that the settings were not supported. Now,
the command shows the proper URL: spice+unix://foo/bar.sock.
Settings:
<graphics type='vnc' port='-1' autoport='yes' listen='127.0.0.1'>
<listen type='address' address='127.0.0.1'/>
</graphics>
<graphics type='spice'>
<listen type='socket' socket='/tmp/spice.sock'/>
</graphics>
Before:
virsh # domdisplay --all Windows7
vnc://127.0.0.1:0
After:
virsh # domdisplay --all Windows7
vnc://127.0.0.1:0
spice+unix:///tmp/spice.sock
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1336720
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
While looking to implement a migrate-getmaxdowntime command (coming),
I noticed that the setmaxdowntime is incorrectly looking at its
parameter as a signed longlong. Not sure how that got past gcc, but
here's a simple patch to make the command line parsing and the parameter to
the worker functions all have the correct (unsigned) type.
Signed-off-by: Scott Garfinkle <seg@us.ibm.com>
The command 'domdisplay' is not freeing the domain pointer properly in
cleanup section. See the error below:
virsh # domdisplay WINDOWS7
vnc://127.0.0.1:0
virsh # quit
error: One or more references were leaked after disconnect from the hypervisor
Valgrind report:
==29168== 66 (56 direct, 10 indirect) bytes in 1 blocks are definitely lost in loss record 154 of 239
==29168== at 0x4C2FB55: calloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==29168== by 0x5505324: virAllocVar (viralloc.c:560)
==29168== by 0x555A61B: virObjectNew (virobject.c:199)
==29168== by 0x561F367: virGetDomain (datatypes.c:284)
==29168== by 0x5680979: get_nonnull_domain (remote_driver.c:8143)
==29168== by 0x5680979: remoteDomainLookupByName (remote_client_bodies.h:3047)
==29168== by 0x5623D9A: virDomainLookupByName (libvirt-domain.c:425)
==29168== by 0x160480: virshLookupDomainInternal (virsh-util.c:59)
==29168== by 0x160547: virshCommandOptDomainBy (virsh-util.c:98)
==29168== by 0x13D3A9: cmdDomDisplay (virsh-domain.c:10963)
==29168== by 0x165680: vshCommandRun (vsh.c:1327)
==29168== by 0x12E320: main (virsh.c:953)
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Resolves a bug in domxml-to-native command option, so that the
following command displays the help information correctly:
'virsh domxml-to-native --help'.
Signed-off-by: Daniel Liu <srwx4096@gmail.com>
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
The option allows someone to run domain-to-native on already existing
domain without the need of supplying their XML. It is basically
wrapper around 'virsh dumpxml | virsh domxml-to-native /dev/stdin'.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=835476
Signed-off-by: Daniel Liu <srwx4096@gmail.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Use ATTRIBUTE_FALLTHROUGH, introduced by commit
5d84f5961b, instead of comments to
indicate that the fall through is an intentional behavior.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
QEMU will likely report the details of it shutting down, particularly
whether the shutdown was initiated by the guest or host. We should
forward that information along, at least for shutdown events. Reset
has that as well, however that is not a lifecycle event and would add
extra constants that might not be used. It can be added later on.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1384007
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
virt-install and virt-manager both default to explicitly setting
"io='native'" in the disk "driver" tag. virsh, however, does not and also
does not provide an option to specify that setting at all. As a result,
disks use a different IO mechanism (the default, "threads") when attached
post-setup using virsh. Adding this option allows users to keep disk
performance consistent for disks attached at install, and those attached
afterward.
The parameter is reported by virDomainGetJobStats API and
VIR_DOMAIN_EVENT_ID_JOB_COMPLETED event and it can be used to identify
the operation (migration, snapshot, ...) to which the reported
statistics belong.
https://bugzilla.redhat.com/show_bug.cgi?id=1441563
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
virDomainFree has it's quirks (does not like NULL pointers, resets
libvirt errors). Replace it by a virsh helper which will allow us to
centrally fix issues with it.
The syntax-check rule will prohibit new uses of virDomainFree.
Move virshLookupDomainBy, virshCommandOptDomainBy and
virshCommandOptDomainBy to the helper file. Additionally turn the
virshCommandOptDomainBy macro into a function.
==18591== 16 bytes in 1 blocks are definitely lost in loss record 41 of 183
==18591== at 0x4C2B934: calloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==18591== by 0x54EBB1C: virAllocN (viralloc.c:191)
==18591== by 0x1628CA: _vshMalloc (vsh.c:136)
==18591== by 0x1344C4: virshVcpuPinQuery (virsh-domain.c:6603)
==18591== by 0x1344C4: cmdVcpuPin (virsh-domain.c:6707)
==18591== by 0x1631BF: vshCommandRun (vsh.c:1312)
==18591== by 0x12DBB1: main (virsh.c:961)
