While the code invokes the string list length calculation twice, it
happens only on error path, which by itself should never happen.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use g_strsplit instead of virStringSplitCount and automatically free the
temporary string list.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In 3 of 4 instances the code didn't even need the count of the elements.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Refactor the handling of variables so that the cleanup section can be
sanitized.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove 'cleanup' and 'error' labels by switching 'ret' to automatic
pointer and stealing it in the return statement.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move variables into the loop which uses them and use automatic freeing
for temporarily allocated variables.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move variables into the loop which uses them and use automatic freeing
for temporarily allocated variables.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Both instances just check the length once. Replicate that faithfully.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use str(r)chr to find the correct bit rather than fully splitting the
string.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use g_auto for the string list and remove 'ret' and 'cleanup'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Unfortunately here we do need the count of elements. Use g_strv_length
to calculate it so that virStringSplitCount can be removed later.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rewrite the code to remove the need to calculate the string list count.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rewrite the code to remove the need to calculate the string list count.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The presence of the second element can be checked by looking at it
directly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The presence of the second element can be checked by looking at it
directly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Prevent unbounded chains by limiting the recursion depth of
virStorageSourceGetMetadataRecurse to the maximum number of image layers
we limit anyways.
This removes the last use of virStorageSourceGetUniqueIdentifier which
will allow us to delete some crusty old infrastructure which isn't
really needed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function is used only inside of the file. We can open-code it and
remove it as it's not very useful.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Add a simpler algorithm converting the JSON array to bitmap so that
virJSONValueGetArrayAsBitmap can be removed in next step.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Both FreeBSD ports and Homebrew on macOS have readline 8.1 now,
and that version contains a correct pkg-config file so the kludge
is no longer necessary.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Follow best practices and add a unsigned int flags parameter to these
new APIs that have not been in a release yet.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The comments mistakenly say 7.2.0, when they were actually merged during
the 7.3 development cycle.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
While the key is available on public GPG key servers, having it locally
at https://libvirt.org/sources/gpg_key.asc is even better.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
One of the error branches used a plain free where vshCommandFree
was required.
https://bugzilla.redhat.com/show_bug.cgi?id=1943415
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
When calling virNodeDeviceDefineXML() to define a new mediated device,
we call virMdevctlDefine() and then wait for the new device to appear in
the driver's device list before returning. This caused long delays due
to the behavior of nodeDeviceFindNewMediatedDevice(). This function
checks to see if the device is in the list and then waits for 5s before
checking again.
Because mdevctl is relatively slow to query the list of defined
devices[0], the newly-defined device was generally not in the device
list when we first checked. This results in libvirt almost always taking
at least 5s to complete this API call for mediated devices, which is
unacceptable.
In order to avoid this long delay, we resort to a workaround. If the
call to virMdevctlDefine() was successful, we can assume that this new
device will exist the next time we query mdevctl for new devices. So we
simply add this provisional device definition directly to the nodedev
driver's device list and return from the function. At some point in the
future, the mdevctl handler will run and the "official" device will be
processed, which will update the provisional device if any new details
need to be added.
The reason that this is not necessary for virNodeDeviceCreateXML() is
because detecting newly-created (not defined) mdevs happens through
udev instead of mdevctl. And nodeDeviceFindNewMediatedDevice() always
calls 'udevadm settle' before checking to see whether the device is in
the list. This allows us to wait just long enough for all udev events to
be processed, so the device is almost always in the list the first time
we check and so we almost never end up hitting the 5s sleep.
[0] on my machine, 'mdevctl list --defined' took around 0.8s to
complete for only 3 defined mdevs.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
To accomodate re-use of this functionality in a following patch, split
out the processing of an individual mdev definition into a separate
function.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Mention that mdev attribute order is significant.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Calling `mdevctl stop` for a mediated device that is in use by an active
domain will block until that vm exits (or the vm closes the device).
Since the nodedev driver cannot query the hypervisor driver to see
whether any active domains are using the device, we resort to a
workaround that relies on the fact that a vfio group can only be opened
by one user at a time. If we get an EBUSY error when attempting to open
the group file, we assume the device is in use and refuse to try to
destroy that device.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
