https://bugzilla.redhat.com/show_bug.cgi?id=1220527
This type of information defines attributes of a system
baseboard. With one exception: board type is yet not implemented
in qemu so it's not introduced here either.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1200206
Commit id '1b4eaa61' added the ability to have a mode='direct' for
an iscsi disk volume. It relied on virStorageTranslateDiskSourcePool
in order to copy any disk source pool authentication information to
the direct disk volume, but it neglected to also copy the 'secrettype'
field which ends up being used in the domain volume formatting code.
Adding a secrettype for this case will allow for proper formatting later
and allow disk snapshotting to work properly
Additionally libvirtd restart processing would fail to find the domain
since the translation processing code is run after domain xml processing,
so handle the the case where the authdef could have an empty secrettype
field when processing the auth and additionally ignore performing the
actual and expected auth secret type checks for a DISK_VOLUME since that
data will be reassembled later during translation processing of the
running domain.
A variable can't be named system, obviously. Well, it can if the
compiler is new enough to distinguish a variable named system and a
function call system(). And some older systems, don't have wise
compiler.
CC util/libvirt_util_la-virsysinfo.lo
cc1: warnings being treated as errors
../../src/util/virsysinfo.c: In function 'virSysinfoParseSystem':
../../src/util/virsysinfo.c:649: error: declaration of 'system' shadows a global declaration [-Wshadow]
/usr/include/stdlib.h:717: error: shadowed declaration is here [-Wshadow]
make[3]: *** [util/libvirt_util_la-virsysinfo.lo] Error 1
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Move all the system_* fields into a separate struct. Not only this
simplifies the code a bit it also helps us to identify whether BIOS
info is present. We don't have to check all the four variables for
being not-NULL, but we can just check the pointer to the struct.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Move all the bios_* fields into a separate struct. Not only this
simplifies the code a bit it also helps us to identify whether BIOS
info is present. We don't have to check all the four variables for
being not-NULL, but we can just check the pointer to the struct.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Multi != One. And indeed, libvirt behaves the same way for queues='1'
as without such setting. Let's make it clear in the XML.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Coverity rightfully determined that in commit 3d021381c7
I made a mistake in the first check if @persDef is not NULL is
dereferencing it rather than checking.
Additionally if the vm is online the code would set @liveDef twice
rather than modifying @persDef. Fix both mistakes.
virDomainLiveConfigHelperMethod that is used for this job now does
modify the flags but still requires the callers to extract the correct
definition objects.
In addition coverity and other static analyzers are usually unhappy as
they don't grasp the fact that @flags are upadted according to the
correct def to be present.
To work this issue around and simplify the calling chain let's add a new
helper that will work only on drivers that always copy the persistent
def to a transient at start of a vm. This will allow to drop a few
arguments. The new function syntax will also fill two definition
pointers rather than modifying the @flags parameter.
While we probably won't see machines with more than 65536 cpus for a
while lets store the cpu count as an integer so that we can avoid quite
a lot of overflow checks in our code.
We have been formatting the first serial device also
as a console device, but only if there were no other consoles.
If there is a <serial> device present in the XML, but no serial
<console>, or if there isn't any <console> at all but the domain
definition hasn't gone through a parse->format->parse round-trip,
the <console> device would not be formatted.
Change the code to always add the stub device for the first
serial device.
Fixes https://bugzilla.redhat.com/show_bug.cgi?id=1089914
Store the emulator pinning cpu mask as a pure virBitmap rather than the
virDomainPinDef since it stores only the bitmap and refactor
qemuDomainPinEmulator to do the same operations in a much saner way.
As a side effect virDomainEmulatorPinAdd and virDomainEmulatorPinDel can
be removed since they don't add any value.
As soon as we keep backward compatibility we treat this constant
as synonym to VIR_DOMAIN_VIRT_PARALLELS.
Signed-off-by: Maxim Nestratov <mnestratov@parallels.com>
If the redirfilter has no usbdev sub-elements, then do not format anything
rather than formatting an empty pair of elements:
<redirfilter>
</redirfilter>
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Commit id '73eda710' added virDomainKeyWrapDefParseXML which uses
virXPathNodeSet, but does not handle a -1 return thus causing a possible
loop condition exit problem later when the return value is used.
Change the logic to return the value from virXPathNodeSet if <= 0
https://bugzilla.redhat.com/show_bug.cgi?id=998813
Like usb-serial, the pci-serial device allows a serial device to be
attached to PCI bus. An example XML looks like this:
<serial type='dev'>
<source path='/dev/ttyS2'/>
<target type='pci-serial' port='0'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/>
</serial>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Sometimes the only thing we need is the pointer to virDomainDiskDef and
having to call virDomainDiskIndexBy* APIs, storing the disk index, and
looking it up in the disks array is ugly. After this patch, we can just
call virDomainDiskBy* and get the pointer in one step.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
After parsing the memory device XML the function would not restore the
XML parser context causing invalid XPath starting point for the rest of
the elements. This is a regression since 3e4230d2.
The test case addition uses the <idmap> element that is currently unused
by qemu, but parsed after the memory device definition and formatted
always.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1223631
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
virDomainParseMemory parses the size and then rounds up while converting
it to kibibytes. Since the number is limit-checked before the rounding
it's possible to use a number that would be correctly parsed the first
time, but not the second time. For numbers not limited to 32 bit systems
the magic is 9223372036854775807 bytes. That number then can't be parsed
back in kibibytes.
To solve the issue add a second overflow check for the few values that
would cause the problem. Since virDomainParseMemory is used in config
parsing, this avoids vanishing VMs.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1221504
https://bugzilla.redhat.com/show_bug.cgi?id=976387
For a domain configured using the host cdrom, we should taint the domain
due to problems encountered when the host and guest try to control the tray.
Two new domain configuration XML elements are added to enable/disable
the protected key management operations for a guest:
<domain>
...
<keywrap>
<cipher name='aes|dea' state='on|off'/>
</keywrap>
...
</domain>
Signed-off-by: Tony Krowiak <akrowiak@linux.vnet.ibm.com>
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Signed-off-by: Daniel Hansel <daniel.hansel@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Because there are multiple potential reasons for an error, this
function logs any errors before returning NULL (since the caller won't
have the information needed to determine which was the reason for
failure).
The APIs take the memory value in KiB and we store it in KiB
internally, but we cannot parse the whole ULONG_MAX range
on 64-bit systems, because virDomainParseScaledValue
needs to fit the value in bytes in an unsigned long long.
https://bugzilla.redhat.com/show_bug.cgi?id=1176739
Since 'autofill'd iothreadid entries are not written during XML format
processing, it is possible that if an iothreadid in the middle of an
autofilled list would then change it's id on a subsequent restart.
Thus during the iothreadid deletion, if we determine the delete is not
the "last" thread, then clear the autofill bit for all iothreadid's
following the one being deleted (either the first or one in the middle).
This way, iothreadid's will be printed/saved.
There is a lot of places, were it's pretty easy for user to enter some
characters that we need to escape to create a valid XML description.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1197580
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1220265
Passing the return value to an enum directly is not safe. Fix this by
comparing the true integer result of virTristateSwitchTypeFromString().
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Specifying a balloon size more than the memory size of a guest isn't
something that should be rejected when parsing the XML. Truncate the
size to the maximum memory size.
Until now the virDomainListAllDomains API would lock the domain list and
then every single domain object to access and filter it. This would
potentially allow a unresponsive VM to block the whole daemon if a
*listAllDomains call would get stuck.
To avoid this problem this patch collects a list of referenced domain
objects first from the list and then unlocks it right away. The
expensive operation requiring locking of the domain object is executed
after the list lock is dropped. While a single blocked domain will still
lock up a listAllDomains call, the domain list won't be held locked and
thus other APIs won't be blocked.
Additionally this patch also fixes the lookup code, where we'd ignore
the vm->removing flag and thus potentially return domain objects that
would be deleted very soon so calling any API wouldn't make sense.
As other clients also could benefit from operating on a list of domain
objects rather than the public domain descriptors a new intermediate
API - virDomainObjListCollect - is introduced by this patch.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1181074
Extend it to a universal helper used for clearing lists of any objects.
Note that the argument type is specifically void * to allow implicit
typecasting.
Additionally add a helper that works on non-NULL terminated arrays once
we know the length.
Some platforms, like aarch64, don't have APIC but GIC. So there's
no reason to have <apic/> feature turned on. However, we are
still missing <gic/> feature. This commit introduces the feature
to XML parser and formatter, adds documentation and updates RNG
schema.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The phyp driver stuffed it into a DomainDefPtr during its attachdevice
routine, but the value is never advertised via capabilities so it should
be safe to drop.
Have the phyp driver use OSTYPE_LINUX, which is what it advertises via
capabilities.
Build with clang fails with:
CC conf/libvirt_conf_la-domain_conf.lo
conf/domain_conf.c:13377:9: error: variable 'cpumask' is used
uninitialized whenever 'if' condition is true
[-Werror,-Wsometimes-uninitialized]
if (!(tmp = virXMLPropString(node, "cpuset"))) {
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
and many other similar errors regarding the 'cpuset' variable.
Fix by explicitly initializing it with NULL.
We're about to allow IOThreads to be deleted, but an iothreadid may be
included in some domain thread sched, so add a new API to allow removing
an iothread from some entry.
Then during the writing of the threadsched data and an additional check
to determine whether the bitmap is all clear before writing it out.
With iothreadid's allowing any 'id' value for an iothread_id, the
iothreadsched code needs a slight adjustment to allow for "any"
unsigned int value in order to create the bitmap of ids that will
have scheduler adjustments. Adjusted the doc description as well.
Remove the iothreadspin array from cputune and replace with a cpumask
to be stored in the iothreadids list.
Adjust the test output because our printing goes in order of the iothreadids
list now.
Since it's only ever referenced in domain_conf.c, make the function
static, but also will need to move it to somewhere before it's referenced
rather than forward referencing it.
Adding a new XML element 'iothreadids' in order to allow defining
specific IOThread ID's rather than relying on the algorithm to assign
IOThread ID's starting at 1 and incrementing to iothreads count.
This will allow future patches to be able to add new IOThreads by
a specific iothread_id and of course delete any exisiting IOThread.
Each iothreadids element will have 'n' <iothread> children elements
which will have attribute "id". The "id" will allow for definition
of any "valid" (eg > 0) iothread_id value.
On input, if any <iothreadids> <iothread>'s are provided, they will
be marked so that we only print out what we read in.
On input, if no <iothreadids> are provided, the PostParse code will
self generate a list of ID's starting at 1 and going to the number
of iothreads defined for the domain (just like the current algorithm
numbering scheme). A future patch will rework the existing algorithm
to make use of the iothreadids list.
On output, only print out the <iothreadids> if they were read in.
use virNetworkRouteDefFree() instead of VIR_FREE to free routes, otherwise
the element 'family' would not be freed.
Signed-off-by: Zhang Bo <oscar.zhangbo@huawei.com>
use cleanup instead of error, so that the allocated strings could also get freed
when there's no error.
Signed-off-by: Zhang Bo <oscar.zhangbo@huawei.com>
