Add the proper video device type when parsing bhyve's commandline into a
XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Support setting a password for the VNC framebuffer using the passwd
attribute on the <graphics/> element, if the driver has the
BHYVE_CAP_VNC_PASSWORD capability.
Note that virsh domxml-from-native does not output the password in the
generated XML, as VIR_DOMAIN_DEF_FORMAT_SECURE is not set when
formatting the domain definition.
Signed-off-by: Fabian Freyer <fabian.freyer@physik.tu-berlin.de>
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The resolution of the VNC framebuffer can now be set via the resolution
definition introduced in 5.9.0.
Also, add "gop" to the list of model types the <resolution/>
sub-element is valid for.
Signed-off-by: Fabian Freyer <fabian.freyer@physik.tu-berlin.de>
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add a new helper function, bhyveParsePCIFbuf, to parse the bhyve-argv
parameters for a frame-buffer device to <graphics/> and <video/>
definitions.
For now, only the listen address, port, and vga mode are detected.
Unsupported parameters are silently skipped.
This involves upgrading the private API to expose the
virDomainGraphicsDefNew helper function, which is used by
bhyveParsePCIFbuf.
Signed-off-by: Fabian Freyer <fabian.freyer@physik.tu-berlin.de>
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
src/bhyve/bhyve_parse_command.c:437:9: warning: Either the condition
'!config' is redundant or there is possible null pointer dereference:
config. [nullPointerRedundantCheck]
src/bhyve/bhyve_parse_command.c:280:23: warning: Either the condition
'!separator' is redundant or there is pointer arithmetic
with NULL pointer. [nullPointerArithmeticRedundantCheck]
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Both accept a NULL value gracefully and virStringFreeList
does not zero the pointer afterwards, so a straight replace
is safe.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
This *is* a no-op, but there was a period of sickening dread while
auditing to be sure that no actual confusion between bus and slot had
occurred. I hope to avoid that by following the conventional order.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
In v5.10.0-508-gfbf3f3d86a, the 'error' label was removed from
bhyveParseBhyveCommandLine(), however the CONSUME_ARG() macro
still uses it. Fix the macro to return an error instead.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Labels that are simply a jump to a 'return' call are
unneeded and can be replaced by the return value instead.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Replace all the usage of
VIR_STRNDUP(dest, b, p ? p - b : -1)
with separate calls to g_strndup/g_strdup.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Replace all occurrences of
if (VIR_STRDUP(a, b) < 0)
/* effectively dead code */
with:
a = g_strdup(b);
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use G_GNUC_UNUSED from GLib instead of ATTRIBUTE_UNUSED.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The _getopt_internal_r func is not intended for public use, it is an
internal function shared between the gnulib getopt and argp modules.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The bhyve driver only works with the virtio and e1000 models,
which we already have in the enum. Some error reporting is
slightly downgraded to avoid some subtle usage of modelstr
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
To ease converting the net->model value to an enum, add
the wrapper functions:
virDomainNetGetModelString
virDomainNetSetModelString
virDomainNetStreqModelString
virDomainNetStrcaseeqModelString
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Use the proper function to allocate a disk definition.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
In many files there are header comments that contain an Author:
statement, supposedly reflecting who originally wrote the code.
In a large collaborative project like libvirt, any non-trivial
file will have been modified by a large number of different
contributors. IOW, the Author: comments are quickly out of date,
omitting people who have made significant contribitions.
In some places Author: lines have been added despite the person
merely being responsible for creating the file by moving existing
code out of another file. IOW, the Author: lines give an incorrect
record of authorship.
With this all in mind, the comments are useless as a means to identify
who to talk to about code in a particular file. Contributors will always
be better off using 'git log' and 'git blame' if they need to find the
author of a particular bit of code.
This commit thus deletes all Author: comments from the source and adds
a rule to prevent them reappearing.
The Copyright headers are similarly misleading and inaccurate, however,
we cannot delete these as they have legal meaning, despite being largely
inaccurate. In addition only the copyright holder is permitted to change
their respective copyright statement.
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The <memoryBacking><locked/></memoryBacking> element will now pass the
wired (-S) flag to the bhyve command.
Signed-off-by: Fabian Freyer <fabian.freyer@physik.tu-berlin.de>
Reviewed-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Recently e1000 NIC support was added to bhyve; implement that in
the bhyve driver:
- Add capability check by analyzing output of the 'bhyve -s 0,e1000'
command
- Modify bhyveBuildNetArgStr() to support e1000 and also pass
virConnectPtr so it could call bhyveDriverGetCaps() to check if this
NIC is supported
- Modify command parsing code to add support for e1000 and adjust tests
- Add net-e1000 test
When generating a domain XML from native command (i.e. via
the connectDomainXMLFromNative call), we should use
interface type 'bridge' rather than 'ethernet' because we only
support bridges at this point.
As we don't have bridge name explicitly specified on the command line,
just use 'virbr0' as a default.
We have couple of functions that operate over NULL terminated
lits of strings. However, our naming sucks:
virStringJoin
virStringFreeList
virStringFreeListCount
virStringArrayHasString
virStringGetFirstWithPrefix
We can do better:
virStringListJoin
virStringListFree
virStringListFreeCount
virStringListHasString
virStringListGetFirstWithPrefix
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Change the virDomainChrDef to use a pointer to 'source' and allocate
that pointer during virDomainChrDefNew.
This has tremendous "fallout" in the rest of the code which mainly
has to change source.$field to source->$field.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Allow to store driver specific data on a per-vcpu basis.
Move of the virDomainDef*Vcpus* functions was necessary as
virDomainXMLOptionPtr was declared below this block and I didn't want to
split the function headers.
A simple getopt-based argument parser is added for the /usr/sbin/bhyveload
command, loosely based on its argument parser.
The boot disk is guessed by iterating over all
disks and matching their sources. If any non-default arguments are found,
def->os.bootloaderArgs is set accordingly, and the bootloader is treated as a
custom bootloader.
Custom bootloader are supported by setting the def->os.bootloader and
def->os.bootloaderArgs accordingly
grub-bhyve is also treated as a custom bootloader. Since we don't get the
device map in the native format anyways, we can't reconstruct the complete
boot order. While it is possible to check what type the grub boot disk is by
checking if the --root argument is "cd" or "hd0,msdos1", and then just use the
first disk found, implementing the grub-bhyve argument parser as-is in the
grub-bhyve source would mean adding a dependency to argp or duplicating lots
of the code of argp. Therefore it's not really worth implementing that now.
Signed-off-by: Fabian Freyer <fabian.freyer@physik.tu-berlin.de>
A simpe getopt-based argument parser is added for the /usr/sbin/bhyve command,
loosely based on its argument parser, which reads the following from the bhyve
command line string:
* vm name
* number of vcpus
* memory size
* the time offset (UTC or localtime)
* features:
* acpi
* ioapic: While this flag is deprecated in FreeBSD r257423, keep checking for
it for backwards compatibiility.
* the domain UUID; if not explicitely given, one will be generated.
* lpc devices: for now only the com1 and com2 are supported. It is required for
these to be /dev/nmdm[\d+][AB], and the slave devices are automatically
inferred from these to be the corresponding end of the virtual null-modem
cable: /dev/nmdm<N>A <-> /dev/nmdm<N>B
* PCI devices:
* Disks: these are numbered in the order they are found, for virtio and ahci
disks separately. The destination is set to sdX or vdX with X='a'+index;
therefore only 'z'-'a' disks are supported.
Disks are considered to be block devices if the path
starts with /dev, otherwise they are considered to be files.
* Networks: only tap devices are supported. Since it isn't possible to tell
the type of the network, VIR_DOMAIN_NET_TYPE_ETHERNET is assumed, since it
is the most generic. If no mac is specified, one will be generated.
Signed-off-by: Fabian Freyer <fabian.freyer@physik.tu-berlin.de>
First, remove escaped newlines and split up the string into an argv-list for
the bhyve and loader commands, respectively. This is done by iterating over the
string splitting it by newlines, and then re-iterating over each line,
splitting it by spaces.
Since this code reuses part of the code of qemu_parse_command.c
(in bhyveCommandLine2argv), add the appropriate copyright notices.
Signed-off-by: Fabian Freyer <fabian.freyer@physik.tu-berlin.de>
