Move this function in order to use it in the next patch before
its previous declaration.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Currently, virDomainDeviceInfoParseXML() uses node->children
evaluation which is too verbose. Use XPath evaluation which is
nicer.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Function virDomainDeviceInfoParseXML() will need it soon, because it
will be doing XPath evaluation.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If libvirtd is terminated before the node driver finishes
initialization, it can crash with a backtrace similar to the following:
Stack trace of thread 1922933:
#0 0x00007f8515178774 g_hash_table_find (libglib-2.0.so.0)
#1 0x00007f851593ea98 virHashSearch (libvirt.so.0)
#2 0x00007f8515a1dd83 virNodeDeviceObjListSearch (libvirt.so.0)
#3 0x00007f84cceb40a1 udevAddOneDevice (libvirt_driver_nodedev.so)
#4 0x00007f84cceb5fae nodeStateInitializeEnumerate (libvirt_driver_nodedev.so)
#5 0x00007f85159840cb virThreadHelper (libvirt.so.0)
#6 0x00007f8511c7d14a start_thread (libpthread.so.0)
#7 0x00007f851442bdb3 __clone (libc.so.6)
Stack trace of thread 1922863:
#0 0x00007f851442651d syscall (libc.so.6)
#1 0x00007f85159842d4 virThreadSelfID (libvirt.so.0)
#2 0x00007f851594e240 virLogFormatString (libvirt.so.0)
#3 0x00007f851596635d vir_object_finalize (libvirt.so.0)
#4 0x00007f8514efe8e9 g_object_unref (libgobject-2.0.so.0)
#5 0x00007f85159667f8 virObjectUnref (libvirt.so.0)
#6 0x00007f851517755f g_hash_table_remove_all_nodes.part.0 (libglib-2.0.so.0)
#7 0x00007f8515177e62 g_hash_table_unref (libglib-2.0.so.0)
#8 0x00007f851596637e vir_object_finalize (libvirt.so.0)
#9 0x00007f8514efe8e9 g_object_unref (libgobject-2.0.so.0)
#10 0x00007f85159667f8 virObjectUnref (libvirt.so.0)
#11 0x00007f84cceb2b42 nodeStateCleanup (libvirt_driver_nodedev.so)
#12 0x00007f8515b37950 virStateCleanup (libvirt.so.0)
#13 0x00005648085348e8 main (libvirtd)
#14 0x00007f8514352493 __libc_start_main (libc.so.6)
#15 0x00005648085350fe _start (libvirtd)
This is because the initial population of the device list is done in a
separate initialization thread. If we attempt to exit libvirtd before
this init thread has completed, we'll try to free the device list while
accessing it from the other thread. In order to guarantee that this
init thread is not accessing the device list when we're cleaning up the
nodedev driver, make it joinable and wait for it to finish before
proceding with the cleanup. This is similar to how we handle the udev
event handler thread.
The separate initialization thread was added in commit
9f0ae0b1.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1836865
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Previously, if xml node passed to the virXMLNodeContentString()
was not of type XML_ELEMENT_NODE, @ret could have caused a memory
leak because xmlNodeGetContent() works for other types of nodes
as well.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Hao Wang <wanghao232@huawei.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Introduce command 'virsh domstats --dirtyrate' for reporting memory
dirty rate information. The info is listed as:
Domain: 'vm0'
dirtyrate.calc_status=2
dirtyrate.calc_start_time=1534523
dirtyrate.calc_period=1
dirtyrate.megabytes_per_second=5
Signed-off-by: Hao Wang <wanghao232@huawei.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Extend dirtyrate statistics for domGetStats to display the information
of a domain's memory dirty rate produced by domainStartDirtyRateCalc.
Signed-off-by: Hao Wang <wanghao232@huawei.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Introduce virDomainStartDirtyRateCalc API for start calculation of
a domain's memory dirty rate with a specified time.
Signed-off-by: Hao Wang <wanghao232@huawei.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit fcdc387410 used a libxl API which
is only available since Xen 4.8.
Due to lack of a specific guard for this API change, reuse another
guard from libxl.h.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
We don't need to go to the trouble of telling users about existance of
insecure SASL mechanisms only to then say that they shouldn't be used.
We should only tell people about the GSSAPI mechanism for TCP sockets.
For the SCRAM mechanism we should be telling people about the SHA256
variant only, and also warning that the password database stores the
passwords in clear text.
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
If running libvirtd via systemd, it gets a 64 MB memlock limit, but if
running from the shell it will only get 64 KB on a Fedora 33 system.
The latter low limit causes any attempt to use BPF to fail and it is
not obvious why.
This improves the error message thus:
# virsh -c lxc:/// start sh
error: Failed to start domain 'sh'
error: internal error: guest failed to start: Failure in libvirt_lxc startup: failed to initialize device BPF map; locked memory limit for libvirtd probably needs to be raised: Operation not permitted
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The g_idle_add function adds a callback to the primary GMainContext.
To workaround the GSource unref bugs, we need to add our callbacks
to the GMainContext that is associated with the GSource being
unref'd. Thus code using the per-VM virEventThread must use its
private GMainContext.
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Give guidance on how to check minimum meson version for a given package.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/140
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Somehow, command argument was not printed into debug logs. It is
imperative that all arguments are logged.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When connecting to the monitor, a timeout is calculated that is
bigger the more memory guest has (because QEMU has to allocate
and possibly zero out the memory and what not, empirically
deducted). However, when computing the timeout the @total_memory
mmember is accessed directly even though
virDomainDefGetMemoryTotal() should have been used.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We don't like virXXXPtr typedefs really and they are going away
shortly, possibly. Do not encourage new code to put in the
typedefs.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In the past, we used to have this oomtrace.pl script that
attempted to print the stack trace of where an OOM error
occurred and it used addr2line for that. But since v5.8.0-rc1~189
we don't really care about OOM anymore and the script is long
gone so there's no need to check for addr2line program either.
Fixes: 2c52ecd960
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We now wrap all its important functionality with the much more
user-friendly ci/helper script, and the long term plan is for
the Makefile to disappear completely.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The functionality is now available in the ci/helper script.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This simply calls the underlying Makefile target, but allows
additional arguments to be specified in a more convenient and
discoverable way.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This simply calls the underlying Makefile target, but allows
additional arguments to be specified in a more convenient and
discoverable way.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This simply calls the underlying Makefile target, but allows
additional arguments to be specified in a more convenient and
discoverable way.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This simply calls the underlying Makefile target.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This provides the same functionality as the two refresh scripts
that are currently in the repository, with the following
advantages:
* all files are refreshed with a single command;
* if lcitool is present in the user's $PATH, it will be
discovered and used automatically;
* some output is produced, so the user can follow along with
the progress of the operation.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This is intended to be perform a number of CI-related operations
that are currently implemented in various different scripts
written in various different programming languages.
Eventually, all existing functionality will be reimplemented in
Python and made available through this single entry point; for
now, let's start with a very basic skeleton.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The target was renamed when moving to Meson, but the help text
was not updated accordingly.
Fixes: 1a0af38ae7
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
There were a number of occurrences where we used nested inline markup
(verbatim + refs) which is currently not possible with RST syntax [1].
There is a possible workaround involving substitution definitions like
.. |virConnectPtr| replace:: ``virConnectPtr``
.. _virConnectPtr: /html/libvirt-libvirt-host.html#virConnectPtr
Substitutions cannot be made generic, hence we cannot create a template
for substitution and use a single template everywhere, so we'd end up
with a lot of clutter and convolution. Therefore, we can make an
exception and just link the data type without further style markup.
[1] https://docutils.sourceforge.io/FAQ.html#is-nested-inline-markup-possible
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When switching to g_autoptr this was incorrectly changed from
'continue;' into 'return -1;' resulting into an error when user tries
to set vcpu_quota of running VM:
error: An error occurred, but the cause is unknown
Fixes: e4a8bbfaf2
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
In short, virXXXPtr type is going away. With big bang. And to
help us rewrite the code with a sed script, it's better if each
variable is declared on its own line.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The name is supposed to be virCapsGuestArchPtr not ..ptr.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The aim of virSecurity rule is to discourage from using plain
virSecurityManager*() APIs within QEMU driver in favor of their
qemuSecurity*() counterparts. The reason is simple: namespaces;
virSecurityManager*() needs additional
virSecurityManagerTransactionCommit() call to enter given
namespace and do its work from there. And that's exactly what
those qemuSecurity*() wrappers do.
To help us ensure correctness (from this POV), we have a
syntax-check rule that forbids any occurrence of
"virSecurityManager" string under src/qemu/ (except for
qemu_security of course).
But with if we want to remove virSecurityManagerPtr type, then we
have to allow "virSecurityManager *". Therefore, change the rule
so that no call of a function with "virSecurityManager" prefix is
allowed. And also change the name to better reflect what is going
on.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The use of virXXXPtr is going away soon, therefore use 'virXXX *'
instead.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
What we are using really is heap allocated structure rather than
stack allocated. And for that it's better to use g_autoptr() +
G_DEFINE_AUTOPTR_CLEANUP_FUNC() combo, as Glib documentation for
g_auto() reads:
This is meant to be used with stack-allocated structures and
non-pointer types. For the (more commonly used) pointer
version, see g_autoptr().
This will be even more visible, when virSysinfoDefPtr type is
gone. Stay tuned.
Fixes: cee3a900a0
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The qemu shim spawns a separate thread in which the event loop is
ran. The virEventRunDefaultImpl() call is wrapped in a while()
loop, just like it should. There are few lines of code around
which try to ensure that domain is destroyed (when quitting) and
that the last round of event loop is ran after the
virDomainDestroy() call. Only after that the loop is quit from
and the thread quits.
However, if domain creation fails, there is no @dom to call
destroy over, the @quit flag is never set and while() never
exits. Set the flag regardless of @dom pointer.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1920337
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The commandline generator for 'iothread' objects has a private
implementation of the properties. Convert it to JSON so that it can be
later validated.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
