Commit Graph

3014 Commits

Author SHA1 Message Date
Peter Krempa
289aa4bc5b virsh: Add QMP command wrapping for 'qemu-monitor-command'
Issuing simple QMP commands is pain as they need to be wrapped by the
JSON wrapper:

 { "execute": "COMMAND" }

and optionally also:

 { "execute": "COMMAND", "arguments":...}

For simple commands without arguments we can add syntax sugar to virsh
which allows simple usage of QMP and additionally prepares also for
passing through of the 'arguments' section:

 virsh qemu-monitor-command $VM query-status

is equivalent to

 virsh qemu-monitor-command $VM '{"execute":"query-status"}'

and

 virsh qemu-monitor-command $VM query-named-block-nodes '{"flat":true}'
 or
 virsh qemu-monitor-command $VM query-named-block-nodes '"flat":true'

is equivalent to

 virsh qemu-monitor-command $VM '{"execute":"query-named-block-nodes", "arguments":{"flat":true}}'

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-10-18 16:04:17 +02:00
Praveen K Paladugu
a0ec7165e3 tools: add virt-host-validate-ch for ch driver
Signed-off-by: Wei-Chen Chen <weicche@microsoft.com>
Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-10-12 17:28:35 +02:00
Jim Fehlig
3f9c1a4bb8 tools: Fix virt-host-validate SEV detection
virt-host-validate checks if AMD SEV is enabled by verifying
/sys/module/kvm_amd/parameters/sev is set to '1'. On a system
running kernel 5.13, the parameter is reported as 'Y'. To be
extra paranoid, add a check for 'y' along with 'Y' to complement
the existing check for '1'.

Fixes: https://bugzilla.opensuse.org/show_bug.cgi?id=1188715

Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2021-10-06 11:23:24 -06:00
Andrea Bolognani
001a101a2e tools: Fix typo firemare -> firmware
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
2021-10-06 11:14:07 +02:00
Michal Privoznik
1b2e06b1bf virsh: Use VIR_AUTOCLOSE more
There are few places where we can replace explicit
VIR_FORCE_CLOSE() with VIR_AUTOCLOSE annotation.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
2021-10-06 09:28:19 +02:00
Michal Privoznik
f427e6c643 virsh: Add wrapper for virStreamFree
Similarly to virshDomainFree add a wrapper for the snapshot object
freeing function.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
2021-10-06 09:27:43 +02:00
Michal Privoznik
d39bd3998e virsh: Add wrapper for virNWFilterFree
Similarly to virshDomainFree add a wrapper for the snapshot object
freeing function.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
2021-10-06 09:27:03 +02:00
Michal Privoznik
40a3a5b608 virsh: Add wrapper for virNodeDeviceFree
Similarly to virshDomainFree add a wrapper for the snapshot object
freeing function.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
2021-10-06 09:26:25 +02:00
Michal Privoznik
db4df06533 virsh: Add wrapper for virNetworkFree
Similarly to virshDomainFree add a wrapper for the snapshot object
freeing function.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
2021-10-06 09:25:47 +02:00
Michal Privoznik
717b6549d5 virsh: Add wrapper for virStorageVolFree
Similarly to virshDomainFree add a wrapper for the snapshot object
freeing function.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
2021-10-06 09:25:22 +02:00
Michal Privoznik
663a29f42e virsh: Add wrapper for virStoragePoolFree
Similarly to virshDomainFree add a wrapper for the snapshot object
freeing function.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
2021-10-06 09:24:17 +02:00
Michal Privoznik
f8fb5be6c8 virsh: Add wrapper for virInterfaceFree
Similarly to virshDomainFree add a wrapper for the snapshot object
freeing function.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
2021-10-06 09:23:25 +02:00
Michal Privoznik
0c43fcddf2 virsh-util.h: Fix ordering of virshXXXFree functions
Currently the order of virshXXXFree functions in the header file
does not correspond to the order in the corresponding .c file.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
2021-10-06 09:20:45 +02:00
Michal Privoznik
3ad0690015 virsh: Fix --nvram and --keep-nvram help strings
The --nvram and --keep-nvram options of the undefine command can
be used regardless of the domain status (the only consumer so far
- qemuDomainUndefineFlags() doesn't care about the domain
status). Yet, their corresponding help strings say something
about inactive domains while manpage says nothing. Remove the
reference to domain state.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2007659
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2021-10-05 08:54:32 +02:00
Tim Wiederhake
4ad3c95f4b vshCmddefCheckInternals: Fix typo
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-10-01 13:12:23 +02:00
Michal Privoznik
f72e4edf50 virsh: Introduce update-memory-device command
New 'update-memory-device' command is introduced which aims on
making it user friendly to change <memory/> device. So far I just
need to change <requested/> so I'm introducing --requested-size
only; but the idea is that this is extensible for other cases
too. For instance, want to change <myElement/>? A new
--my-element argument can be easily introduced.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-10-01 11:05:05 +02:00
Michal Privoznik
9985f62b51 qemu: Wire up MEMORY_DEVICE_SIZE_CHANGE event
As advertised in previous commit, this event is delivered to us
when virtio-mem module changes the allocation inside the guest.
It comes with one attribute - size - which holds the new size of
the virtio-mem (well, allocated size), in bytes.
Mind you, this is not necessarily the same number as 'requested
size'. It almost certainly will be when sizing the memory up, but
it might not be when sizing the memory down - the guest kernel
might be unable to free some blocks.

This current size is reported in the domain XML as an output
element only.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-10-01 11:04:47 +02:00
Kristina Hanicova
49d74124a5 virsh: domain: remove else branch
I removed else branches after return/break as they are not
necessary and the code looks cleaner without them.

Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-09-25 09:30:53 +02:00
Kristina Hanicova
bd82e3d81a virsh: domain: remove 'ret' variable and use 'count' instead
This patch also includes use of an early return in case of an
error. I think the changes make the functions more readable.

Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-09-25 09:30:43 +02:00
Kristina Hanicova
24ddb0cdfe virsh: domain: use early return when possible
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-09-25 09:30:09 +02:00
Kristina Hanicova
6e1cdf928c virsh: domain: remove 'ret' variable, use early return when possible
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-09-25 09:28:51 +02:00
Kristina Hanicova
9a5db04fe6 virsh: domain: remove 'ret' variable and use direct return when possible
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-09-25 09:28:45 +02:00
Kristina Hanicova
a1fe822801 virsh: domain: remove nested 'if' in cmdAttachDisk()
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-09-25 09:27:34 +02:00
Kristina Hanicova
14a804ee67 virsh: domain: use early return in virshDomainDefine()
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-09-25 09:25:56 +02:00
Kristina Hanicova
bc7b8a34fa virsh: domain: remove unnecessary variable and label in cmdMigrateSetMaxDowntime()
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-09-25 09:16:30 +02:00
Kristina Hanicova
0987edbedf virsh: domain: fix mistake in cmdMigrateSetMaxDowntime()
If there was added a new return value indicating success to the
function virDomainMigrateSetMaxDowntime() in the future, because
of the way the function is called it would be treated it as an
error state and would return false (indicating failure). This
patch fixes it, so that the call of the function follows the same
pattern as is currently set in libvirt.

Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-09-25 09:14:56 +02:00
Michal Privoznik
bf9074c6a8 vsh: Don't check for OOM in vshGetTypedParamValue()
Both function description and function itself mention check for
OOM which can't happen really. There was a bug in glib where
g_strdup_*() might have not aborted on OOM, but we have our own
implementation when dealing with broken glib (see
vir_g_strdup_printf()). Therefore, checking for OOM is redundant
and can never be true.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-09-24 12:40:48 +02:00
Kristina Hanicova
71cc4aacc2 virsh: util: remove 'else' branch after return
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-09-24 09:58:07 +02:00
Kristina Hanicova
45b17385e7 virsh: remove variable 'ret' and 'inactive'
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-09-24 09:58:06 +02:00
Kristina Hanicova
409ccebcaa virsh: remove variable 'ret' in cmdVersion()
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-09-24 09:58:04 +02:00
Kristina Hanicova
28051aaa9b virsh: remove variable 'ret' and use early return if possible
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-09-24 09:58:01 +02:00
Kristina Hanicova
978a124659 virsh: volume: refactor cmdVolInfo()
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-09-24 09:52:42 +02:00
Kristina Hanicova
096da894cd virsh: host: refactor cmdNodeCpuStats()
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-09-24 09:52:42 +02:00
Kristina Hanicova
21a0019392 virsh: host: refactor cmdFreecell()
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-09-24 09:52:42 +02:00
Kristina Hanicova
ba78db1f73 virsh: domain: refactor cmdLxcEnterNamespace()
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-09-24 09:52:42 +02:00
Kristina Hanicova
637d98b329 virsh: domain: refactor virshCPUCountCollect()
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-09-24 09:52:42 +02:00
Kristina Hanicova
e31502544c virsh: domain: refactor cmdSchedinfo()
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-09-24 09:52:42 +02:00
Michal Privoznik
b480a5cb5c vsh: Ensure that bool --options don't have completer
Let's check whether a boolean --option doesn't have completer or
completer_flags set. These options are just flags and don't
accept any value, thus they can't have any completer.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-09-21 10:20:41 +02:00
Michal Privoznik
a1a22b0b1c vsh: Extend checks for aliased commands
If a command is an alias, then it can only have .name, .flags and
.alias set and .flags should contain just VSH_CMD_FLAG_ALIAS.
Check if that's the case in self-test.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-09-21 10:20:41 +02:00
Michal Privoznik
520e858a8d virsh: Provide local path completer for vol-download --file
The vol-download command takes mandatory --file argument which
points to a local (possibly non-existent) path. If the file
exists then it's overwritten. Set the argument's completer so
that self-test doesn't report it as missing.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-09-21 10:20:41 +02:00
Michal Privoznik
8eefc7afc8 virsh: Provide local path completer for screenshot --file
The screenshot command takes optional --file argument which can
point to an existing local path (in which case the file is
overwritten). Set the argument's completer so that self-test
doesn't report it as missing.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-09-21 10:20:41 +02:00
Kristina Hanicova
19b77df5cc tools: virsh-snapshot: refactor small functions
This patch includes:
* removal of dead code
* simplifying nested if conditions
* removal of unnecessary variables
* usage of "direct" boolean return

Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-09-20 09:35:22 +02:00
Peter Krempa
9d26af5e5b vsh: Move 'vshReadlineOptionsGenerator' out of '#if WITH_READLINE'
It's now also used in vshCompleteHelpCommand which is outside of the
conditionally compiled code.

Fixes: 80f70c74a7
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
2021-09-17 11:00:13 +02:00
Peter Krempa
c580c8db70 virsh-completer: Provide completer for '--top' and '--base' for blockjobs
Complete with the indexed targets (e.g. vda[3]) based on existing
indexes.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-09-17 09:40:46 +02:00
Peter Krempa
071bab399a virsh: Introduce virshCompleteEmpty and use it for places where we can't suggest anything
For now this serves just as an annotation because readline and also the
bash completion script insist on completing local paths when an empty
list is returned.

This will serve for future reference once we'll be able to properly
refuse to suggest anything.

The completer is used for fields such as names for new objects,
description strings, password strings etc, URIs and hostnames which we
can't feasibly autocomplete.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-09-17 09:40:46 +02:00
Peter Krempa
2732d81984 virsh: Use 'virshCompletePathLocalExisting' for options reading local files
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-09-17 09:40:46 +02:00
Peter Krempa
16252b16b7 virsh: completer: Introduce dummy completer for local files
For now the completion does the correct thing of completing a local path
if NULL is returned.

Introduce 'virshCompletePathLocalExisting' and use it in the
'VIRSH_COMMON_OPT_FILE' macro.

This for now serves as an annotation for the function which want to read
a file on the host running virsh. In the future this can be used with a
more sophisticated implementation.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-09-17 09:40:46 +02:00
Peter Krempa
bc4739ed77 virsh: Expand VIRSH_COMMON_OPT_FILE for cases when it's not a local file used by virsh
In cases such as the APIs for managed save management, the file path
provided via the '--file' option is passed to the API.

We'll need to make them distinct from cases for when virsh is using the
file so that different completers can be used.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-09-17 09:40:46 +02:00
Peter Krempa
119b139c76 virsh: Provide completers for options taking comma separated list of disk targets
'--storage' of the 'undefine' command and '--migrate-disks' of the
'migrate' command take a list of disk targets as an argument.

We can simply combine 'virshDomainDiskTargetCompleter' with
'virshCommaStringListComplete' to provide the completions.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-09-17 09:40:46 +02:00
Peter Krempa
80f70c74a7 vsh: Add completer for '--command' of 'help' command
Wrap 'vshReadlineCommandGenerator' into a function with proper prototype
to provide a completer for the help command.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-09-17 09:40:46 +02:00
Peter Krempa
f20512c414 virsh: Use 'virshStoragePoolNameCompleter' for two options
'--pool' of the 'pool-event' command and '--inputpool' of
'vol-create-from' use the above mentioned completer.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-09-17 09:40:46 +02:00
Peter Krempa
573385dc9c virsh-snapshot: Use 'virshSnapshotNameCompleter' for '--from' of 'snapshot-list'
When listing a snapshot tree, the '--from' option takes a name of a
snapshot to limit the subset. Use virshSnapshotNameCompleter as
completer for the option.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-09-17 09:40:46 +02:00
Peter Krempa
8f5b8fac33 vsh: Introduce '--completers-missing' for 'self-test' command
Make it simple to spot which options of which commands are missing
autocompletion functions by introducing this hidden option.

In the future when we'll have completers for everything this can be also
used as a hard fail so that completers are always added.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-09-17 09:40:46 +02:00
Peter Krempa
7f72ed0707 vshCmddefCheckInternals: Sanitize command alias validation
We don't need to validate the real command twice, but it's better to
check that the real command name exists and it's not an alias to prevent
loops.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-09-17 09:40:46 +02:00
Peter Krempa
1726c572a2 virsh: Remove hack using 'VSH_CMD_FLAG_ALIAS' to hide virsh commands
Introduce a proper flag 'VSH_CMD_FLAG_HIDDEN' for hiding commands from
output so that we can validate that there aren't any loops or
misconfigured commands.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-09-17 09:40:46 +02:00
Peter Krempa
4402bff1ec virsh-completer*.h: Use modern header style
Prevent the need to edit the function declarations to put them into the
header. There was even inconsistent use.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-09-17 09:40:46 +02:00
Peter Krempa
6246bc6601 virshCheckpointNameCompleter: Sanitize forward declaration use
Include the proper header instead of duplicating the declaration.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-09-17 09:40:46 +02:00
Jiri Denemark
88810c5267 virsh: Make code flow in cmdManagedSaveRemove more straightforward
By doing so we can get rid of the code which violates our coding style
guidelines.

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
2021-09-16 16:47:54 +02:00
Kristina Hanicova
4d31c02f05 virsh: add support for '--validate' option in create network
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-09-16 16:26:18 +02:00
Kristina Hanicova
ceb0d2b71a tools/virsh-pool: refactor smaller functions
I think these functions look much more readable with just simple
if conditions.

Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-09-16 15:25:42 +02:00
Peter Krempa
eb2e317c65 virshDomainGetVcpuBitmap: Refactor cleanup
Rename the temp variable that is being returned and use automatic
pointer clearing for it.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
2021-09-15 15:31:17 +02:00
Peter Krempa
59e74c3193 virshDomainGetVcpuBitmap: Return bitmap when taking the fallback path
In case the specific VCPU states are not present in the XML we were
taking a fallback code path just noting that all cpus of the VM are
enabled.

This was broken by a mistake in a recent refactor where a 'goto cleanup'
was mistakenly replaced by a 'return NULL'. This broke reporting of cpus
and also caused a memory leak.

Return the fallback cpu map.

Fixes: bd1f40fe7d
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2004429
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
2021-09-15 15:31:17 +02:00
Jonathon Jongsma
0cb4550305 virsh: add nodedev-info
This is currently the only way to view the 'autostart' property for a
node device in virsh.

Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2021-09-14 14:25:56 -05:00
Jonathon Jongsma
16d078eded virsh: add nodedev-autostart
Add ability to set node devices to autostart on boot or parent device
availability.

Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2021-09-14 14:24:07 -05:00
dinglimin
6e89972541 virsh: Display vhostuser socket path in domblklist
The domblklist command is designed to show a brief information
about the blocks of a domain. One piece of information that is
shows is "Target "and "Source". Before the modification, the
Vhost disk of SPDK is displayed as "-". After the modification,
the socket associated with it can be displayed.

Signed-off-by: dinglimin <dinglimin@cmss.chinamobile.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-09-09 13:56:06 +02:00
Kristina Hanicova
8f8eeb3750 virsh: add support for '--validate' option in create nwfilter-binding
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2021-09-06 17:08:59 +02:00
Kristina Hanicova
6779fca41c virsh: add support for '--validate' option in create network port
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2021-09-06 17:08:59 +02:00
Kristina Hanicova
5ca09c6b27 virsh: add support for '--validate' option in define storage pool
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-08-25 09:57:58 +02:00
Kristina Hanicova
7e7747cc2d virsh: add support for '--validate' option in define network
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-08-24 15:47:03 +02:00
Michal Privoznik
6d7a16361b virsh-snapshot: Don't leak @then in cmdSnapshotList()
The variable is used inside a loop in which it's allocated in
each iteration. Bring it inside the loop so that g_autoptr()
kicks in each iteration.

Fixes: 3caa28dc50
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-08-23 14:52:15 +02:00
Kristina Hanicova
ec5561c0bb virsh: add support for '--validate' option in define secret
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2021-08-20 15:41:22 +02:00
Kristina Hanicova
d46a0b0e96 virsh: add support for '--validate' option in define interface
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2021-08-20 15:41:22 +02:00
Kristina Hanicova
a3d88c9d4c virsh: add support for '--validate' option in define nwfilter
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-08-20 15:38:53 +02:00
Michal Privoznik
868bacd380 virsh: Support vhostuser in attach-interface
Recently, I wanted to attach an vhost-user interface but found
out that attach-interface command doesn't support it.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
2021-08-18 14:21:40 +02:00
Peter Krempa
8efd949c8b vshStringToArray: Rewrite using 'g_strsplit'
Use 'g_strsplit' to split the strings and then concatenate back when the
escape sequence (',,') is used.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-08-18 11:07:25 +02:00
Peter Krempa
4db8ffeb2e virsh: Add testing for vshStringToArray
Add a '--split' switch for the 'virsh echo' command and add few test
cases to the virshtest.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-08-18 11:07:25 +02:00
Peter Krempa
31fa241b46 virsh: cmdEcho: Rewrite with new buffer helpers
Remove the need for temporary strings by filling the output buffer
directly.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-08-18 11:07:25 +02:00
Peter Krempa
86de16b317 virsh: cmdEcho: Make '--xml' and '--shell' mutually exclusive
Initialize the flags earlier and use VSH_EXCLUSIVE_OPTIONS_VAR to
declare the conflicting options as exclusive.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-08-18 11:07:25 +02:00
Peter Krempa
a52a201c22 virsh: Un-document 'virsh echo'
Note that it's for internal testing use and remove the manpage entry.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-08-18 11:07:25 +02:00
Ján Tomko
bd1f40fe7d tools: virsh: remove redundant labels
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
2021-08-16 13:10:34 +02:00
Ján Tomko
fba265e2b2 tools: virsh: use g_autofree
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
2021-08-16 13:10:34 +02:00
Ján Tomko
07b40abe0f tools: virsh: use automatic cleanup for char **
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
2021-08-16 13:10:34 +02:00
Ján Tomko
851e66e05d tools: virsh: reduce variable scope to use automatic cleanup
Some variables are used in a loop and only freed in the cleanup
section because we need to be able to jump out of the loop.

Reduce their scope and free them automatically.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
2021-08-16 13:10:34 +02:00
Ján Tomko
4b72960b4e tools: virsh: use automatic cleanup for vshTable
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
2021-08-16 13:10:34 +02:00
Ján Tomko
5f7cdb0efc tools: virsh: use automatic cleanup for xmlDoc
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
2021-08-16 13:10:34 +02:00
Ján Tomko
2a7e5240ff tools: virsh: use automatic cleanup for xmlXPathObject
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
2021-08-16 13:10:34 +02:00
Ján Tomko
be72434d79 tools: virsh: use automatic cleanup for xmlXPathContext
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
2021-08-16 13:10:33 +02:00
Ján Tomko
cf337df3d6 tools: virsh: use automatic cleanup for virDomainObj
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
2021-08-16 13:10:33 +02:00
Ján Tomko
7c0443fb73 tools: virsh: cmdDominfo: rename 'ostype' variable
Use 'ostype' instead of generic 'str', to discourage
reuse. Also mark it as autofree.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
2021-08-16 13:10:33 +02:00
Ján Tomko
65551e2239 tools: virsh: split variable declarations
One variable per line.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
2021-08-16 13:10:33 +02:00
Ján Tomko
4de7ccc4d8 vsh: steal pointer in vshEditWriteToTempFile
Fixes: 13896b5ad1
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2021-08-12 11:45:21 +02:00
Ján Tomko
7dd72490f6 virsh: refactor cmdDomblkinfo
Use automatic memory cleanup to get rid of the cleanup section,
and of the memory leak that happens inside the loop, because
cap, alloc and phy are only freed once per function.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
2021-08-12 11:01:18 +02:00
Ján Tomko
630b0dd6c3 virsh: snapshot: remove pointless cleanup labels
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
2021-08-11 10:52:58 +02:00
Ján Tomko
602fe72b3e virsh: snapshot: use g_auto where possible
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
2021-08-11 10:52:58 +02:00
Ján Tomko
d0a69b2adf virsh: checkpoint: remove pointless cleanup labels
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
2021-08-11 10:52:58 +02:00
Ján Tomko
9c89451dcd virsh: checkpoint: use g_auto where possible
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
2021-08-11 10:52:58 +02:00
Ján Tomko
1cab62bfaf virsh: cmdCheckpointInfo: delete unused variables
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
2021-08-11 10:52:58 +02:00
Ján Tomko
56bb594532 virsh: snapshot: move variables inside the loop
Use g_auto to free them, instead of open-coding it.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
2021-08-11 10:52:58 +02:00
Ján Tomko
7f1c6736fa virsh: checkpoint: move variables inside the loop
Use g_auto to free them instead of open-coding it.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
2021-08-11 10:52:58 +02:00
Ján Tomko
6c96bf6bbf virsh: add cleanup function for virshDomainSnapshot
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
2021-08-11 10:52:58 +02:00
Ján Tomko
84e9baad7b virsh: add cleanup function for virshDomainCheckpoint
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
2021-08-11 10:52:58 +02:00
Ján Tomko
186742ed70 vsh: table: define cleanup function
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
2021-08-11 10:52:58 +02:00
Ján Tomko
a6488fd3a2 vsh: use g_clear_pointer
Replace remaining uses of VIR_FREE with g_clear_pointer.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
2021-08-11 10:52:58 +02:00
Ján Tomko
4d64c850c4 vsh: remove pointless cleanup labels
Remove cleanup sections that are no longer needed, as well
as unnecessary 'ret' variables.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
2021-08-11 10:52:58 +02:00
Ján Tomko
13896b5ad1 vsh: use g_auto where possible
Excluding vshCommandParse.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
2021-08-11 10:52:58 +02:00
Ján Tomko
f78e2495e5 vsh: cmdEcho: use separate variable for argument
Do not use 'arg' which is later used for an allocated string.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
2021-08-11 10:52:58 +02:00
Ján Tomko
2cbc686d66 vsh: do not cast away const
Instead of using the same variable to store either a const pointer
or an allocated string, always make a copy.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
2021-08-11 10:52:58 +02:00
Peter Krempa
98f6f2081d util: alloc: Reimplement VIR_APPEND_ELEMENT using virAppendElement
Use virAppendElement instead of virInsertElementsN to implement
VIR_APPEND_ELEMENT which allows us to remove error handling as the
only relevant errors were removed when switching to aborting memory
allocation functions.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-08-06 08:53:25 +02:00
Pavel Hrdina
dc721f99df virsh: fix setmem flags logic
When we dropped virDomainSetMemory usage it got kind of tricky to
figure out the flags correctly.

Originally the logic was following:

    no option | --current | --live | --config | --live --config
    ----------+-----------+--------+----------+----------------
       LIVE   |  CURRENT  |  LIVE  |  CONFIG  |  LIVE & CONFIG

But after the commit removing virDomainSetMemory usage it changed to:

    no option | --current | --live |    --config     | --live --config
    ----------+-----------+--------+-----------------+----------------
       LIVE   |  CURRENT  |  LIVE  |  LIVE & CONFIG  |  LIVE & CONFIG

This commit fixes the logic back to the original behavior except for
ESX, HyperV and Virtuozzo drivers where virDomainSetMemory() default
behavior was CURRENT instead of LIVE.

Fixes: ce8138564b
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1980199
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-07-23 11:24:51 +02:00
Peter Krempa
b12a0e62f0 virsh-volume: Avoid 'vir' prefix for locally declared VIR_ENUM* helpers
Stuff used in virsh should use 'virsh'.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-07-23 09:59:12 +02:00
Peter Krempa
0c038aeffc virsh-network: Avoid 'vir' prefix for locally declared VIR_ENUM* helpers
Stuff used in virsh should use 'virsh'.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-07-23 09:59:12 +02:00
Peter Krempa
9e7f32790a virsh-domain: Avoid 'vir' prefix for locally declared VIR_ENUM* helpers
Stuff used in virsh should use 'virsh'.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-07-23 09:59:12 +02:00
Peter Krempa
cc530c4557 virsh-host: Avoid 'vir' prefix for locally declared VIR_ENUM* helpers
Stuff used in virsh should use 'virsh'.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-07-23 09:59:12 +02:00
Jonathon Jongsma
26136e3b86 virsh: allow nodedev-list --all --tree
Allow the tree view with --all so that we can see all inactive mdevs in
a tree structure nested under their parent devices.

Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-07-19 11:32:12 +02:00
Han Han
78b1a53df1 virsh: Fix the order of format arguments in doDump
According to definition of virDomainCoreDumpFormat, the "elf" should be
the first argument in VIR_ENUM_*.

Fixes: 84cc4543be

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1981625

Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
2021-07-13 11:21:23 +02:00
Lin Ma
16c43b2d49 virsh-volume: Apply virshStorageVolNameCompleter to vol-{key,path} commands
Signed-off-by: Lin Ma <lma@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-06-16 10:32:43 +02:00
Lin Ma
6a1bf268d9 virsh-volume: Apply virshStorageVolKeyCompleter to vol-{name,pool} commands
Signed-off-by: Lin Ma <lma@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-06-16 10:32:42 +02:00
Lin Ma
64818c9ec1 virsh-volume: Add macros VIRSH_COMMON_OPT_VOL_*
Signed-off-by: Lin Ma <lma@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-06-16 10:32:39 +02:00
Lin Ma
254504adc3 virsh-volume: Introduce virshStorageVolKeyCompleter
Signed-off-by: Lin Ma <lma@suse.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-06-16 10:32:36 +02:00
Lin Ma
64787c80fc virsh-pool: Remove static from virshStoragePoolList{Free,Collect}
The functions will be used by next patch.

Signed-off-by: Lin Ma <lma@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-06-16 10:32:33 +02:00
Lin Ma
3dab81cb21 virsh-pool: Add virshPoolTypeCompleter in macro VIRSH_COMMON_OPT_POOL_X_AS
Signed-off-by: Lin Ma <lma@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-06-15 10:28:04 +02:00
Lin Ma
8cdbca6213 virsh: Add format completion to blockcopy command
Signed-off-by: Lin Ma <lma@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-06-15 10:28:02 +02:00
Lin Ma
8de9a54b9e virsh: Add target completion to dompmsuspend command
Signed-off-by: Lin Ma <lma@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-06-15 10:27:59 +02:00
Lin Ma
b41811b93d virsh: Use VIR_ENUM_* for --target argument in cmdDomPMSuspend
Signed-off-by: Lin Ma <lma@suse.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-06-15 10:27:57 +02:00
Lin Ma
0691d642ba virsh: Add target completion to nodesuspend command
Signed-off-by: Lin Ma <lma@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-06-15 10:27:55 +02:00
Lin Ma
7d1028c3f6 virsh: Use VIR_ENUM_* for --target argument in cmdNodeSuspend
Signed-off-by: Lin Ma <lma@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-06-15 10:27:53 +02:00
Lin Ma
a61a6978d3 virsh: Add comp-methods completion to migrate command
Signed-off-by: Lin Ma <lma@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-06-15 10:27:47 +02:00
Michal Privoznik
1ab5a37c4a Don't call qsort() over NULL
In a few places it may happen that the array we want to sort is
still NULL (e.g. because there were no leases found, no paths for
secdriver to lock or no cache banks). However, passing NULL to
qsort() is undefined and even though glibc plays nicely we
shouldn't rely on undefined behaviour.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
2021-06-14 14:16:44 +02:00
Fabiano Fidêncio
93e9e92c1e virt-host-validate: Fix IOMMU output on aarch64
virt-host-validate should print "Checking for device assignment IOMMU
support" for all architectures, not only for Intel / AMD.

This is the output without the patch:
```
[fidencio@dentola libvirt]$ virt-host-validate
  QEMU: comprobando if device /dev/kvm exists                                   : PASA
  QEMU: comprobando if device /dev/kvm is accessible                            : PASA
  QEMU: comprobando if device /dev/vhost-net exists                             : PASA
  QEMU: comprobando if device /dev/net/tun exists                               : PASA
  QEMU: comprobando for cgroup 'cpu' controller support                         : PASA
  QEMU: comprobando for cgroup 'cpuacct' controller support                     : PASA
  QEMU: comprobando for cgroup 'cpuset' controller support                      : PASA
  QEMU: comprobando for cgroup 'memory' controller support                      : PASA
  QEMU: comprobando for cgroup 'devices' controller support                     : ADVERTENCIA (Enable 'devices' in kernel Kconfig file or mount/enable cgroup controller in your system)
  QEMU: comprobando for cgroup 'blkio' controller support                       : PASA
ADVERTENCIA (Unknown if this platform has IOMMU support)
  QEMU: comprobando for secure guest support                                    : ADVERTENCIA (Unknown if this platform has Secure Guest support)

```

This is the output with the patch:
```
[fidencio@dentola libvirt]$ ./build/tools/virt-host-validate
  QEMU: Checking if device /dev/kvm exists                                   : PASS
  QEMU: Checking if device /dev/kvm is accessible                            : PASS
  QEMU: Checking if device /dev/vhost-net exists                             : PASS
  QEMU: Checking if device /dev/net/tun exists                               : PASS
  QEMU: Checking for cgroup 'cpu' controller support                         : PASS
  QEMU: Checking for cgroup 'cpuacct' controller support                     : PASS
  QEMU: Checking for cgroup 'cpuset' controller support                      : PASS
  QEMU: Checking for cgroup 'memory' controller support                      : PASS
  QEMU: Checking for cgroup 'devices' controller support                     : WARN (Enable 'devices' in kernel Kconfig file or mount/enable cgroup controller in your system)
  QEMU: Checking for cgroup 'blkio' controller support                       : PASS
  QEMU: Checking for device assignment IOMMU support                         : WARN (Unknown if this platform has IOMMU support)
  QEMU: Checking for secure guest support                                    : WARN (Unknown if this platform has Secure Guest support)
```

Signed-off-by: Fabiano Fidêncio <fabiano@fidencio.org>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-06-09 12:51:36 +02:00
Michal Privoznik
85ea510624 virHostValidateSecureGuests: Drop useless 'return 0' at the end
Previous patches rendered 'return 0' at the end of the function a
dead code. Therefore, the code can be rearranged a bit and the
line can be dropped.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Fabiano Fidêncio <fabiano@fidencio.org>
2021-06-09 08:23:28 +02:00
Michal Privoznik
853228c022 virt-host-validate: Call VIR_HOST_VALIDATE_FAILURE() more frequently
Ideally, every virHostMsgFail() would be coupled with
VIR_HOST_VALIDATE_FAILURE() so that the failure is correctly
propagated to the caller. However, in
virHostValidateSecureGuests() we are either ignoring @level and
returning 0 directly (no error), or not returning at all, relying
on 'return 0' at the end of the function. Neither of these help
propagate failure correctly.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Fabiano Fidêncio <fabiano@fidencio.org>
2021-06-09 08:23:18 +02:00
Michal Privoznik
7ea5a80dc1 virt-host-validate: Turn failure to read /proc/cmdline into an error
When validating secure guests support on s390(x) we may read
/proc/cmdline and look for "prot_virt" argument. Reading the
kernel command line is done via virFileReadValueString() which
may fail. In such case caller won't see any error message. But we
can produce the same warning/error as if "prot_virt" argument
wasn't found.  Not only this lets users know about the problem,
it also terminates the "Checking for ...." line correctly.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Fabiano Fidêncio <fabiano@fidencio.org>
2021-06-09 08:23:13 +02:00
Michal Privoznik
52d2571b58 virt-host-validate: Report an error if failed to detect CGroups
As a part of its checks, virt-host-validate calls virCgroupNew()
to detect CGroup controllers which are then printed out. However,
virCgroupNew() can fail (with appropriate error message set).
Let's print an error onto stderr if that happens.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Fabiano Fidêncio <fabiano@fidencio.org>
2021-06-09 08:22:33 +02:00
Michal Privoznik
e7ae82dcc5 virt-host-validate: Initialize the error object
Several libvirt functions are called from virt-host-validate.
Some of these functions do report an error on failure. But
reporting an error is coupled with freeing previous error (by
calling virResetError()). But we've never called
virErrorInitialize() and thus resetting error object frees some
random pointer.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Fabiano Fidêncio <fabiano@fidencio.org>
2021-06-09 08:21:52 +02:00
Fabiano Fidêncio
f798970b18 tools: only fail validations if VIR_HOST_VALIDATE_FAIL is set
Currently `virt-host-validate` will fail whenever one of its calls fail,
regardless of virHostValidateLevel set.

This behaviour is not optimal and makes it not exactly reliable as a
command line tool as other tools or scripts using it would have to check
its output to figure out whether something really failed or if a warning
was mistakenly treated as failure.

With this change, the behaviour of whether to fail or not, is defined by
the caller of those functions, based on the virHostValidateLevel passed
to them.

https://gitlab.com/libvirt/libvirt/-/issues/175

Signed-off-by: Fabiano Fidêncio <fabiano@fidencio.org>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-06-08 08:52:07 +02:00
Lin Ma
564512e916 virsh: Add coredump format completion to dump command
Signed-off-by: Lin Ma <lma@suse.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-06-07 16:30:59 +02:00
Lin Ma
84cc4543be virsh: Use VIR_ENUM_* for --format argument in doDump
Signed-off-by: Lin Ma <lma@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-06-07 16:30:56 +02:00
William Douglas
56fbabf1a1 Add basic driver for the Cloud-Hypervisor
Cloud-Hypervisor is a KVM virtualization using hypervisor. It
functions similarly to qemu and the libvirt Cloud-Hypervisor driver
uses a very similar structure to the libvirt driver.

The biggest difference from the libvirt perspective is that the
"monitor" socket is seperated into two sockets one that commands are
issued to and one that events are notified from. The current
implementation only uses the command socket (running over a REST API
with json encoded data) with future changes to add support for the
event socket (to better handle shutdowns from inside the VM).

This patch adds support for the following initial VM actions using the
Cloud-Hypervsior API:
 * vm.create
 * vm.delete
 * vm.boot
 * vm.shutdown
 * vm.reboot
 * vm.pause
 * vm.resume

To use the Cloud-Hypervisor driver, the v15.0 release of
Cloud-Hypervisor is required to be installed.

Some additional notes:
 * The curl handle is persistent but not useful to detect ch process
 shutdown/crash (a future patch will address this shortcoming)
 * On a 64-bit host Cloud-Hypervisor needs to support PVH and so can
 emulate 32-bit mode but it isn't fully tested (a 64-bit kernel and
 32-bit userspace is fine, a 32-bit kernel isn't validated)

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: William Douglas <william.douglas@intel.com>
2021-06-04 10:56:06 +01:00
Michal Privoznik
ce8138564b virsh-domain: Drop support for old APIs in cmdSetmem and cmdSetmaxmem
Some of our really old APIs are missing @flags argument. We
introduced their variants with "Flags" suffix and wired some
logic into virsh to call the new variant only if necessary. This
enables virsh to talk to older daemon which may be lacking new
APIs.

However, in case of cmdSetmem() we are talking about v0.1.1
(virDomainSetMemory()) vs. v0.9.0 (virDomainSetMemoryFlags()) and
in case of cmdSetmaxmem() we are talking about v0.0.3
(virDomainSetMaxMemory()) vs v0.9.0 (virDomainSetMemoryFlags()).

Libvirt v0.9.0 was released more than 10 years ago and recently
we dropped support for RHEL-7 which has v4.5.0 (released ~3 years
ago). Thus it is not really necessary to have support in virsh
for such old daemons.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
2021-06-02 10:13:50 +02:00
Peter Krempa
92a3eddd03 Remove static analysis assertions
None of them are currently needed to pass our upstream CI, most were
either for ancient clang versions or coverity for silencing false
positives.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-05-24 20:26:20 +02:00
Peter Krempa
bbd55e9284 Drop magic comments for coverity
They were added mostly randomly and we don't really want to keep working
around of false positives.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-05-24 20:26:20 +02:00
Michal Privoznik
3de70da32d virsh: Expose new win-dmp dump format
In previous commit the virDomainCoreDumpWithFormat() API gained
new format. Expose it.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
2021-05-20 16:24:06 +02:00
Michal Privoznik
01a2339e1f virsh-domain: Fix @ret handling in cmdSetmem and cmdSetmaxmem
These functions initialize @ret to true and only after something
fails either they call cleanup code (which consists only from
virshDomainFree()) and return false, or they set ret = false and
carry on (when the failure occurred close to cleanup code).

Switch them to the usual pattern in which ret is initialized to
failure, goto cleanup is used and ret is set to true only after
everything succeeded.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
2021-05-19 15:31:36 +02:00
Michal Privoznik
168190e19c virsh: Fix logic wrt to --current flag in cmdSetmem
In my commit of v7.1.0-rc1~376 I've simplified the logic of
handling @flags. My assumption back then was that calling
virDomainSetMemory() is equivalent to
virDomainSetMemoryFlags(flags = 0). But that is not the case,
because it is equivalent to virDomainSetMemoryFlags(flags =
VIR_DOMAIN_AFFECT_LIVE). Fix the condition that calls the old
API.

Fixes: b5e267e8c5
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1961118
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
2021-05-19 15:31:17 +02:00
Lin Ma
093eed7360 virsh: Fix completion logic to guestvcpus command
In case of non-continuous vCPU topology, We can't infer the bitmap size
from the combination of onlineVcpuStr and nvcpus.
We should use virBitmapParseUnlimited here instead of virBitmapParse due
to the bitmap size is unknown.

e.g.:

  <vcpus>
    <vcpu id='0' enabled='yes' hotpluggable='no' order='1'/>
    <vcpu id='1' enabled='yes' hotpluggable='yes' order='2'/>
    <vcpu id='2' enabled='yes' hotpluggable='yes' order='3'/>
    <vcpu id='3' enabled='yes' hotpluggable='yes' order='4'/>
    <vcpu id='4' enabled='yes' hotpluggable='yes' order='5'/>
    <vcpu id='5' enabled='yes' hotpluggable='yes' order='6'/>
    <vcpu id='6' enabled='no' hotpluggable='yes'/>
    <vcpu id='7' enabled='no' hotpluggable='yes'/>
  </vcpus>

 # virsh guestvcpus --domain VM
vcpus          : 0-5
online         : 0-5
offlinable     : 1-5

 # virsh setvcpu --domain VM --disable --vcpulist 2

 # virsh guestvcpus --domain VM --disable --cpulist 4,5

 # virsh guestvcpus --domain VM
vcpus          : 0-1,3-5
online         : 0-1,3
offlinable     : 1,3-5

Before:
 # virsh guestvcpus --domain VM --enable --cpulist <TAB><TAB>
2  4

After:
 # virsh guestvcpus --domain VM --enable --cpulist <TAB><TAB>
4  5

Signed-off-by: Lin Ma <lma@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-04-22 13:46:48 +02:00
Lin Ma
14c36b107d virsh: Add mountpoint completion to domfsfreeze/domfsthaw command
Signed-off-by: Lin Ma <lma@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-04-22 13:46:44 +02:00
Andrea Bolognani
cf66ee8ddc tools: Generate per-command bash completion script
The current setup uses a single script that is symlinked twice
and that tries to configure bash completion for both virsh and
virt-admin, even if only one of them is installed. This also
forces us to have a -bash-completion RPM package that only
contains the tiny shared file.

Rework bash completion support so that two scripts are
generated, each one tailored to a specific command.

Since the shared script no longer exists after this change,
the corresponding RPM package becomes empty.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-04-22 11:01:27 +02:00
Michal Privoznik
7657804df7 bash-completion: Fix argument passing to $1
Our vsh bash completion string is merely just a wrapper over
virsh/virt-admin complete (cmdComplete) - a hidden command that
uses internal readline completion to generate list of candidates.
But this means that we have to pass some additional arguments to
the helper process: e.g. connection URI and R/O flag.

Candidates are printed on a separate line each (and can contain
space), which means that when bash is reading the helper's output
into an array, it needs to split items on '\n' char - hence the
IFS=$'\n' prefix on the line executing the helper. This was
introduced in b889594a70.

But this introduced a regression - those extra arguments we might
pass are stored in a string and previously were split on a space
character (because $IFS was kept untouched and by default
contains space). But now, after the fix that's no longer the case
and thus virsh/virt-admin sees ' -r -c URI' as one argument.

The solution is to take $IFS out of the picture by storing the
extra arguments in an array instead of string.

Fixes: b889594a70
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2021-04-22 10:14:38 +02:00
Luke Yue
6e91cbfdad Replace AbsPath judgement method with g_path_is_absolute()
The g_path_is_absolute() considers more situations
than just a simply "path[0] == '/'".

Related issue: https://gitlab.com/libvirt/libvirt/-/issues/12

Signed-off-by: Luke Yue <lukedyue@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-04-21 10:02:09 +02:00
Tim Wiederhake
1c34211c22 virshCheckpointListCollect: Do not pass NULL to qsort
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
2021-04-19 16:09:56 -04:00
Tim Wiederhake
89ce1ef86b cmdSnapshotList: Fix memory leak
Fixes: 3caa28dc50
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
2021-04-19 16:09:56 -04:00
Tim Wiederhake
8b8c91f487 cmdCheckpointList: Fix memory leak
Fixes: 3caa28dc50
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
2021-04-19 16:09:56 -04:00
Peter Krempa
c2558e78d4 cmdDomBlkError: Fix crash when initial call to virDomainGetDiskErrors fails
virDomainGetDiskErrors uses the weird semantics where we make the
caller query for the number of elements and then pass pre-allocated
structure.

The cleanup section errorneously used the 'count' variable to free the
allocated elements for the API but 'count' can be '-1' in cases when the
API returns failure, thus attempting to free beyond the end of the
array.

Resolves: https://gitlab.com/libvirt/libvirt/-/issues/155
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-04-19 11:04:53 +02:00
Peter Krempa
f1c9fed2ca virsh: snapshot: Don't validate schema of XML generated by 'virsh snapshot-create-as'
Commit 95f8e3237e which introduced XML schema validation
for snapshot XMLs always asserted the validation for the XML generated
by 'virsh snapshot-create-as' on the basis that it's libvirt-generated,
thus valid.

This unfortunately isn't true as users can influence certain bits of the
XML such as the disk image path which must be a full path. Thus if a
user tries to invoke virsh as:

 $ virsh snapshot-create-as upstream --diskspec vda,file=relative.qcow2
 error: XML document failed to validate against schema: Unable to validate doc against /path/to/domainsnapshot.rng
 Extra element disks in interleave
 Element domainsnapshot failed to validate content

They get a rather useless error from the libxml2 RNG validator.

With this fix applied, we get to the XML parser in libvirtd which has a
more reasonable error:

 $ virsh snapshot-create-as upstream --diskspec vda,file=relative.qcow2
 error: XML error: disk snapshot image path 'relative.qcow2' must be absolute

Instead users can force validation of the XML generated by 'virsh
snapshot-create-as' by passing the '--validate' flag.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-04-16 17:27:39 +02:00
Tim Wiederhake
5729d94917 Fix spelling
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2021-04-15 15:42:21 +02:00
Michal Privoznik
c8238579fb lib: Drop internal virXXXPtr typedefs
Historically, we declared pointer type to our types:

  typedef struct _virXXX virXXX;
  typedef virXXX *virXXXPtr;

But usefulness of such declaration is questionable, at best.
Unfortunately, we can't drop every such declaration - we have to
carry some over, because they are part of public API (e.g.
virDomainPtr). But for internal types - we can do drop them and
use what every other C project uses 'virXXX *'.

This change was generated by a very ugly shell script that
generated sed script which was then called over each file in the
repository. For the shell script refer to the cover letter:

https://listman.redhat.com/archives/libvir-list/2021-March/msg00537.html

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
2021-04-13 17:00:38 +02:00
Tim Wiederhake
f0e1e31bf7 Remove references to deleted Makefile.am
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2021-04-13 11:21:00 +02:00
Peter Krempa
def579e88a virshParseRateStr: Use g_strsplit instead of virStringSplitCount
Count the elements after splitting the string.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-04-12 15:55:09 +02:00
Peter Krempa
d9c3b652ef virshParseRateStr: Refactor cleanup
Use g_auto for the string list and remove 'ret' and 'cleanup'.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-04-12 15:55:09 +02:00
Peter Krempa
71eb5e10c0 virHostValidateGetCPUFlags: Use g_strsplit instead of virStringSplitCount
We don't need the count of elements to iterate the list.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-04-12 15:55:09 +02:00
Peter Krempa
d7e2bca9b7 virshParseEventStr: Use g_strsplit and automatic memory freeing
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-04-12 15:55:09 +02:00
Jonathon Jongsma
e2f82a3704 api: Add 'flags' param to virNodeDeviceCreate/Undefine()
Follow best practices and add a unsigned int flags parameter to these
new APIs that have not been in a release yet.

Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2021-04-09 12:43:47 -05:00
Ján Tomko
a131b8b517 vsh: fix memory leak in vshCommandParse
One of the error branches used a plain free where vshCommandFree
was required.

https://bugzilla.redhat.com/show_bug.cgi?id=1943415

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2021-04-09 13:07:30 +02:00
Jonathon Jongsma
45741a4a2d virsh: add "nodedev-start" command
This virsh command maps to virNodeDeviceCreate(), which starts a node
device that has been previously defined by virNodeDeviceDefineXML().
This is only supported for mediated devices.

Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2021-04-07 15:14:01 -05:00
Jonathon Jongsma
5dc935805e virsh: add nodedev-undefine command
Add a virsh command that maps to virNodeDeviceUndefine().

Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2021-04-07 15:14:01 -05:00
Jonathon Jongsma
732a5eecbc virsh: Factor out function to find node device
Several functions accept providing a node device by name or by wwnn,wwpn
pair. Extract the logic to do this into a function that can be used by
both callers.

Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2021-04-07 15:14:01 -05:00
Jonathon Jongsma
725dfb6c36 virsh: add nodedev-define command
Add a virsh command that maps to virNodeDeviceDefineXML().

Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2021-04-07 15:10:34 -05:00
Jonathon Jongsma
7d5d29a727 virsh: Add --inactive, --all to nodedev-list
Now that we can filter active and inactive node devices in
virConnectListAllNodeDevices(), add these switches to the virsh command.

Eventual output (once everything is hooked up):

    virsh # nodedev-list --cap mdev
    mdev_bd2ea955_3402_4252_8c17_7468083a0f26

    virsh # nodedev-list --inactive --cap mdev
    mdev_07d8b8b0_7e04_4c0f_97ed_9214ce12723c
    mdev_927c040f_ae7d_4a35_966e_286ba6ebbe1c

    virsh # nodedev-list --all --cap mdev
    mdev_07d8b8b0_7e04_4c0f_97ed_9214ce12723c
    mdev_927c040f_ae7d_4a35_966e_286ba6ebbe1c
    mdev_bd2ea955_3402_4252_8c17_7468083a0f26

Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2021-04-07 15:10:34 -05:00
Jonathon Jongsma
94187b8004 nodedev: add DEFINED/UNDEFINED lifecycle events
Since a mediated device can be persistently defined by the mdevctl
backend, we need additional lifecycle events beyond CREATED/DELETED to
indicate that e.g. the device has been stopped but the device definition
still exists.

Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2021-04-07 15:07:45 -05:00
Michal Privoznik
0c30e7221c lib: Use g_steal_pointer() more
Generated by the following spatch:

  @@
  expression a, b;
  @@

  + b = g_steal_pointer(&a);
  - b = a;
    ... when != a
  - a = NULL;

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2021-03-24 13:57:51 +01:00
Jiri Denemark
1107c0b9c3 Do not check return value of VIR_REALLOC_N
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2021-03-22 12:44:18 +01:00
Jiri Denemark
7d2fd6ef01 Do not check return value of VIR_EXPAND_N
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2021-03-22 12:44:18 +01:00
Hao Wang
5be6decbb1 migration/dirtyrate: Introduce command 'virsh domstats --dirtyrate'
Introduce command 'virsh domstats --dirtyrate' for reporting memory
dirty rate information. The info is listed as:

Domain: 'vm0'
  dirtyrate.calc_status=2
  dirtyrate.calc_start_time=1534523
  dirtyrate.calc_period=1
  dirtyrate.megabytes_per_second=5

Signed-off-by: Hao Wang <wanghao232@huawei.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-03-18 08:50:25 +01:00
Hao Wang
a2ae2dad06 migration/dirtyrate: Introduce domdirtyrate-calc virsh api
Introduce domdirtyrate-calc virsh api to start calculating domain's
memory dirty rate:
	# virsh domdirtyrate-calc <domain> [--seconds <sec>]

Signed-off-by: Hao Wang <wanghao232@huawei.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-03-18 08:50:25 +01:00
Roman Bogorodskiy
d5b2644815 meson: tools: depend on keycode generated sources
Tools depend on keycode generated sources, so declare that as an
explicit dependency, otherwise it might fail with:

../tools/virsh-completer-domain.c:35:10: fatal error: 'virkeynametable_linux.h' file not found
         ^~~~~~~~~~~~~~~~~~~~~~~~~

Fixes: b0f4cf25a6
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-03-05 20:05:54 +04:00
Michal Privoznik
b1e3728dec lib: Replace virFileMakePathWithMode() with g_mkdir_with_parents()
These functions are identical. Made using this spatch:

  @@
  expression path, mode;
  @@
  - virFileMakePathWithMode(path, mode)
  + g_mkdir_with_parents(path, mode)

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-03-04 20:52:23 +01:00
Kristina Hanicova
d64f3f763f vsh-table: Use g_autofree where possible
In: vshTableRowNew(), vshTablePrint(), vshTablePrintToStdout().

Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2021-03-04 17:29:07 +01:00
Peter Krempa
ec6e2a2c97 util: xml: Add wrapper for 'xmlNewNode'
Add a wrapper that will handle the out of memory condition by abort()
and also prevents callers from having to typecast the argument.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
2021-03-02 09:50:19 +01:00
Michal Privoznik
e19171b40c tools: Fix dry run of libvirt_recover_xattrs.sh
The libvirt_recover_xattrs.sh script can be used to remove stale
XATTRs that were left behind by secdrivers (which should happen
only if there's an imbalance between set and restore calls).
Anyway, the script has '-n' switch which is supposed to perform
just a dry run, i.e. just to report which files have XATTRs set
without any attempt to remove them.

But, when rewriting the script a few months ago a typo was
introduced which made the script report no files even if there
were files with XATTRs.

Fixes: 5377177f80
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2021-03-02 09:42:38 +01:00
Daniel Henrique Barboza
953be56eea virsh-domain.c: use g_auto* in cmdDetachDevice()
Use g_auto* pointers to avoid the need of a cleanup label. The
type of the pointer 'virDomainPtr dom' was changed to its alias
'virshDomainPtr' to allow the use of g_autoptr().

Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2021-03-01 12:25:33 -03:00
Kristina Hanicova
155151a3d0 Use g_steal_pointer where possible
Via coccinelle (not the handbag!)
spatches used:
@ rule1 @
identifier a, b;
symbol NULL;
@@

- b = a;
  ... when != a
- a = NULL;
+ b = g_steal_pointer(&a);

@@

- *b = a;
  ... when != a
- a = NULL;
+ *b = g_steal_pointer(&a);

Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2021-03-01 15:54:42 +01:00
Kristina Hanicova
b0f4cf25a6 virsh: Add virshKeycodeNameCompleter
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2021-02-19 07:39:56 +01:00
Kristina Hanicova
6a8451c506 virsh: reindent virshCodesetNameCompleter prototype
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2021-02-19 07:39:56 +01:00
Kristina Hanicova
040a5bc307 virsh: Add virshCodesetNameCompleter
This completer offers completion for --codeset argument of
send-key command.

Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-02-16 21:26:54 +01:00
Daniel P. Berrangé
46783e6307 tools: report messages for 'dominfo' command
$ virsh dominfo demo
Id:             2
Name:           demo
UUID:           eadf8ef0-bf14-4c5f-9708-4a19bacf9e81
OS Type:        hvm
State:          running
CPU(s):         2
CPU time:       15.8s
Max memory:     1536000 KiB
Used memory:    1536000 KiB
Persistent:     yes
Autostart:      disable
Managed save:   no
Security model: selinux
Security DOI:   0
Security label: unconfined_u:unconfined_r:svirt_t:s0:c443,c956 (permissive)
Messages:       tainted: custom monitor control commands issued
                tainted: use of deprecated configuration settings
                deprecated configuration: machine type 'pc-1.2'

Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-02-12 09:19:13 +00:00
Peter Krempa
10157731f4 Replace virStringSplit with g_strsplit
Our implementation was heavily inspired by the glib version so it's a
drop-in replacement.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-02-11 17:05:34 +01:00
Peter Krempa
dcd547aec1 Replace virStringListLength by g_strv_length
The glib implementation doesn't tolerate NULL but in most cases we check
before anyways. The rest of the callers adds a NULL check.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-02-11 17:05:34 +01:00
Peter Krempa
56cedfcf38 Replace virStringListHasString by g_strv_contains
The glib variant doesn't accept NULL list, but there's just one caller
where it wasn't checked explicitly, thus there's no need for our own
wrapper.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2021-02-11 17:05:33 +01:00
Michal Privoznik
7415e72e68 vsh: Drop unused @text arg from readline generators
After previous patches neither vshReadlineCommandGenerator() nor
vshReadlineOptionsGenerator() use prefix that user wants to
complete. The argument is marked as unused in both functions.
Drop it then.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
2021-02-10 11:51:59 +01:00
Michal Privoznik
72636ed86d vsh: Rework vshReadlineCommandGenerator()
Firstly, move variable declarations into the inner most block
they are used. Secondly, use for() loop instead of while so that
we don't have to advance loop counter explicitly on 'continue'.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
2021-02-10 11:51:59 +01:00
Michal Privoznik
9b005b1967 vsh: Simplify condition for calling completer callback
The way we currently call completer callbacks is that if we've
found --option that user wants to complete value for and it has
callback set then the callback is called.

And just before that, if no --option to have the value completed
is found or is found and is of boolean type then a list of
--option is generated (for given command).

But these two conditions can never be true at the same time
because boolean type of --options do not accept values. Therefore
the calling of completer callback can be promoted onto the same
level as the --option list generation.

This means that merging of two lists can be dropped to and
completer callback can store its retval directly into @list (but
as shown earlier one of the string lists to merge is always
empty).

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
2021-02-10 11:51:59 +01:00
Michal Privoznik
b1eab47c2d vsh: Deduplicate filtering in vshReadlineCommandGenerator()
Completer callbacks generate all possible outputs ignoring any partial
input (e.g. prefix of a domain name) and then use vshCompleterFilter() to
filter out those strings which don't fit the partial input (prefix).

In contrast, vshReadlineCommandGenerator() does some internal filtering and
only generates completions that match a given prefix. Rather than treating
these scenarios differently, simply generate all possible options and
filter them all at the end.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
2021-02-10 11:51:59 +01:00
Michal Privoznik
c3ea585e18 vsh: Deduplicate filtering in vshReadlineOptionsGenerator()
Completer callbacks generate all possible outputs ignoring any partial
input (e.g. prefix of a domain name) and then use vshCompleterFilter() to
filter out those strings which don't fit the partial input (prefix).

In contrast, vshReadlineOptionsGenerator() does some internal filtering and
only generates completions that match a given prefix. Rather than treating
these scenarios differently, simply generate all possible options and
filter them all at the end.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
2021-02-10 11:51:59 +01:00
Michal Privoznik
3cc6572fab vsh: Rewrite opt->type check in vshReadlineParse()
The vshReadlineParse() function is called whenever user hits
<TAB><TAB>. If there is no command (or a partially written one),
then a list of possible commands is printed to the user. But, if
there is a command then its --options are generated. But
obviously, we can not generate --options if there already is an
--option that's expecting a value. For instance, consider:

  virsh # start --domain <TAB><TAB>

In this case we want to call completer for --domain option, but
that's a different story.

Anyway, the way that we currently check whether --options list
should be generated is checking the type of the last --option. If
it isn't DATA, STRING, INT, or ARGV (all these expect a value),
then we can generate --option list. Well, writing the condition
this way is needlessly verbose and also prone to errors (see
d9a320bf97 for example).

We know that boolean type does not require a value. This leaves
us with the only type that was not mentioned yet - VSH_OT_ALIAS.
This is a special type for backwards compatibility and it refers
to another --option which can be just any type.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
2021-02-10 11:51:59 +01:00
Michal Privoznik
9ad2cb6e73 vsh: Use g_auto() for string lists returned in readline command/options generators
There are two functions that are used to generate completion
lists: vshReadlineCommandGenerator() for command names and
vshReadlineOptionsGenerator() for --options for given command.
Both return a string list, but may also fail while constructing
it. For that case, they call g_strfreev() explicitly, which is
needless since we have g_auto(GStrv).

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
2021-02-10 11:51:59 +01:00
Michal Privoznik
eac14234c8 vsh: Prefer g_strdup_printf() over g_snprintf() in vshReadlineOptionsGenerator()
The vshReadlineOptionsGenerator() function returns a string list
of all --options for given command. But the way that individual
items on the list are allocated can be written better.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
2021-02-10 11:51:59 +01:00
Michal Privoznik
6ba61373b7 vsh: Accept NULL @list in vshCompleterFilter()
The aim of vshCompleterFilter() is to take a string list and a
prefix and remove all strings from the list that don't have the
desired prefix. The function is used to filter out those strings
returned by a completer callback that don't correspond with
user's (partial) input. For instance, domain name completer
virshDomainNameCompleter() returns all domain names and then
vshCompleterFilter() refines the list so that only domains with
correct prefix of their name are offered to user. This was a
design choice - it allows us to have shorter completers as they
do not have to copy the list filtering over and over.

Having said all of that, it may happen that a completer does not
return anything (e.g. there is no domain in requested state,
virsh is not connected and thus completer exited early, etc.). In
that case, the string list is NULL and vshCompleterFilter() can
simply return early.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
2021-02-10 11:51:59 +01:00
Michal Privoznik
268f16293c vsh: Use g_auto(GStrv) to free string list returned by completer callback
This saves us explicit call of g_strfreev() in error path.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
2021-02-10 11:51:59 +01:00
Michal Privoznik
58aeebe096 vsh: Don't put VSH_OT_ALIAS onto list of completions
We've invented VSH_OT_ALIAS type for --option so that we can
rewrite some --options (e.g. fix spelling). For instance
blkdeviotune command uses this feature heavily:
--options-with-dash are preferred over old
--options_with_underscore. Both versions are supported but only
the new ones (not aliased) are documented and reported in --help.

Except for options completer, which happily put also aliased
versions in front of user's eyes.

Note, there is a second (gross) way we use aliases: to rewrite
options from --oldoption to --newoption=value (for instance
--shareable option of attach-disk is an alias of
--mode=shareable). And just like with the previous group - don't
generate them into the list of possible options.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
2021-02-10 11:51:59 +01:00
Michal Privoznik
d3b2d5158a lib: Substitute some STREQLEN with STRPREFIX
There are few cases where STREQLEN() is called like this:

  STREQLEN(var, string, strlen(string))

which is the same as STRPREFIX(var, string). Use STRPREFIX()
because it is more obvious what the check is doing.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
2021-02-10 11:51:59 +01:00