The keycodemap tool is told to generate docs in rst format now
instead of pod.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This was a semi-automated conversion. First it was run through pod2rst,
and then it was manually editted to use a rst structure that matches
expectations of rst2man.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This was a semi-automated conversion. First it was run through pod2rst,
and then it was manually editted to use a rst structure that matches
expectations of rst2man.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This was a semi-automated conversion. First it was run through pod2rst,
and then it was manually editted to use a rst structure that matches
expectations of rst2man.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Pull in changes which support use of RST for docs output format
instead of POD.
The generator tool has changed its command line arg handling
so all args must be after the command name. The docs title and
subtitle must be specified separately too.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
With all plumbing in place, we can now enable the new functionality.
Signed-off-by: Pavel Mores <pmores@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Since blockcommit is asynchronous, libvirtd can be restarted while the
operation runs. To ensure the information necessary to finish up the job
is not lost, serialisation to and deserialisation from the status XML is
added.
To unittest this, the new element was only added to the active commit test,
the non-active commit test doesn't have the new element so as to test its
absence.
Signed-off-by: Pavel Mores <pmores@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When blockcommit finishes successfully, one of the
qemuBlockJobProcessEventCompletedCommit() and
qemuBlockJobProcessEventCompletedActiveCommit() event handlers is called.
This is where the delete flag (stored in qemuBlockJobCommitData since the
previous commit) can actually be used to delete the committed snapshot
images if requested.
We use virFileRemove() instead of a simple unlink() to cover the case where
the image to be removed is on an NFS volume.
Signed-off-by: Pavel Mores <pmores@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Propagate the delete flag from qemuDomainBlockCommit() (which was just
ignoring it until now) to qemuBlockJobDiskNewCommit() where it can be
stored in the qemuBlockJobCommitData structure which holds information
necessary to finish the job asynchronously.
In the actual qemuBlockJobDiskNewCommit() in this commit, we temporarily
pass a literal 'false' to preserve the current behaviour until the whole
implementation of the feature is in place.
Signed-off-by: Pavel Mores <pmores@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Teach virt-aa-helper how to label a qcow2 data_file, tracked internally
as externalDataStore. It should be treated the same as its sibling
disk image
Reviewed-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Adjust virLXCDriverGetCapabilities to fill in driver->caps if it is
empty, regardless of the passed 'refresh' value. This matches the
pattern used in virQEMUDriverGetCapabilities
This fixes LXC XML startup parsing for me
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Clang complains about condition being always true:
src/util/virkeyfile.c:113:23: error: result of comparison of constant 128 with expression of type 'const char' is always true [-Werror,-Wtautological-constant-out-of-range-compare]
while (!IS_EOF && IS_ASCII(CUR) && CUR != ']')
^~~~~~~~~~~~~
src/util/virkeyfile.c:80:26: note: expanded from macro 'IS_ASCII'
~~~ ^ ~~~
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The .pc files in src/ are intended for use with the ./run script,
to ease building bindings against an uninstalled libvirt build.
The pointer to the API XML files is incorrect though, it needs to
point into the build tree.
This fixes use of the run script for building libvirt-python, ex:
/path/to/libvirt.git/run ./setup.py build
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
GLib doesn't provide alternative to c_isascii and this is the only usage
of that macro so define a replacement ourselves.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
The same way how we have IS_EOL in two files where we actually need it
defince IS_BLANK so we can drop usage of c_isblank.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This flag will allow figuring out whether the hypervisor supports the
incremental backup and checkpoint features.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After the individual sub-blockjobs of a backup libvirt job finish we
must detect it and notify the parent job, so that it can be properly
terminated.
Since we update job information to determine success of a blockjob we
can directly report back also statistics of the blockjob.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the helper which cancels all blockjobs to perform the backup job
cancellation in qemuDomainAbortJob.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We can use the output of 'query-jobs' to figure out some useful
information about a backup job. That is progress in case of a push job
and scratch file use in case of a pull job.
Add a worker which will total up the data and call it from
qemuDomainGetJobStatsInternal.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The stats reported for a blockjob which is member of a domain pull
backup refer to the utilization of the scratch file rather than the
progress of the backup as the progress of the backup depends on the
client. Note this quirk in the docs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We need a place to store stats of completed sub-jobs so that we can
later report accurate stats.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
A backup blockjob needs to be able to notify the parent backup job as
well as track all data to be able to clean up the bitmap and blockdev
used for the backup.
Add the data structure, job allocation function and status XML formatter
and parser.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Store the data of a backup job along with the index counter for new
backup jobs in the status XML. Currently we will support only one
backup job and thus there's no necessity to add arrays of jobs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Implement the transaction actions generator for blockdev-backup.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
A backup job may consist of many backup sub-blockjobs. Add the new
blockjob type and add all type converter strings.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We will want to use the async job infrastructure along with all the APIs
and event for the backup job so add the backup job as a new async job
type.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce QEMU_DOMAIN_JOB_STATS_TYPE_BACKUP and the convertors and other
plumbing to be able to report statistics for the backup job.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Accept XML describing a generic block job, and output it again as
needed. This may still need a few tweaks to match the documented XML
and RNG schema.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This one is fairly straightforward - the generator already does what
we need.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce a few new public APIs related to incremental backups. This
builds on the previous notion of a checkpoint (without an existing
checkpoint, the new API is a full backup, differing from
virDomainBlockCopy in the point of time chosen and in operation on
multiple disks at once); and also allows creation of a new checkpoint
at the same time as starting the backup (after all, an incremental
backup is only useful if it covers the state since the previous
backup).
A backup job also affects filtering a listing of domains, as well as
adding event reporting for signaling when a push model backup
completes (where the hypervisor creates the backup); note that the
pull model does not have an event (starting the backup lets a third
party access the data, and only the third party knows when it is
finished).
The full list of new APIs:
virDomainBackupBegin;
virDomainBackupGetXMLDesc;
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
$ cat f | grep -e arch -e emulator
<type arch='mipsel'>hvm</type>
$ sudo virsh define f
error: Failed to define domain from f
error: An error occurred, but the cause is unknown
After:
$ sudo virsh define f
error: Failed to define domain from f
error: unsupported configuration: No emulator found for arch 'mipsel'
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
The virDomainVideoDefNew requires the xml options to be
provided since
commit 3dbf3941ad
Author: Marc-André Lureau <marcandre.lureau@redhat.com>
Date: Mon Sep 23 14:44:35 2019 +0400
conf: add privateData to virDomainVideoDef
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
'cfg' is never initialized here, which causes a crash
later in qemuCheckpointCreateFinalize
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
For any backing file we set 'read-only' to true, but didn't do this when
modifying the recorded backing store when creating external snapshots.
This meant that qemu would attempt to open the backing-file read-write.
This would fail for example when selinux is used as qemu doesn't have
write permission for the backing file.
https://bugzilla.redhat.com/show_bug.cgi?id=1781079
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that nearly all internal APIs use the QEMU capabilities or other
QEMU driver data directly, there's no compelling benefit to create
virCapsPtr at driver startup.
Skipping this means we don't probe capabilities for all 30 system
emulator targets at startup, only those emulators which are referenced
by an XML doc. This massively improves libvirtd startup time when the
capabilities cache is not populated. It even improves startup time
when the cache is up to date, as we don't bother to load files from
the cache until we need them.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We always refresh the capabilities object when using virResctrlInfo
during process startup. This is undesirable overhead, because we can
just directly create a virResctrlInfo instead.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Avoid grabbing the whole virCapsPtr object when we only need the
host CPU information.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Annoyingly there was no existing constructor, and identifying all the
places which do a VIR_ALLOC(cpu) is a bit error prone. Hopefully this
has found & converted them all.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Avoid grabbing the whole virCapsPtr object when we only need the
NUMA information.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The NUMA cells are stored directly in the virCapsHostPtr
struct. This moves them into their own struct allowing
them to be stored independantly of the rest of the host
capabilities. The change is used as an excuse to switch
the representation to use a GPtrArray too.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Now that the domain XML APIs don't use virCapsPtr we can stop passing it
around many QEMU driver methods.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This parameter is now unused and can be removed entirely.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
None of the impls of this callback require the virCapsPtr param.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
None of the impls of this callback require the virCapsPtr param.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
No impl of this callback requires the virCapsPtr anymore.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The only user of this callback did not require the virCapsPtr parameter.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The QEMU impl of the callback can directly use the QEMU capabilities
cache to resolve the emulator binary name, allowing virCapsPtr to be
dropped.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virCapsPtr param is not used by any of the virt drivers providing
this callback.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Instead of using the virCapsPtr to get the default security model,
pass this in via the parser config.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently the disk and chardev seclabels are validated immediately at
the time their data is parsed. This forces the parser to fill in the
top level secmodel at time of parsing which is an undesirable thing.
This validation conceptually should be done in the post-parse phase
instead.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Instead of using the virCapsPtr information, pass the driver specific
netprefix in the domain parser struct. This eliminates one more use of
virCapsPtr from the XML parsing/formatting code.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
To enable the virCapsPtr parameter to the post parse method to be
eliminated, the drivers must fetch the virCapsPtr from their own
driver via the opaque parameter, or use an alternative approach
to validate the parsed data.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The XML parser currently calls virCapabilitiesDomainDataLookup during
parsing to find the domain capabilities matching the triple
(virt type, os type, arch)
This is, however, bogus with the QEMU driver as it assumes that there
is an emulator known to the default driver capabilities that matches
this triple. It is entirely possible for the driver to be parsing an
XML file with a custom emulator path specified pointing to a binary
that doesn't exist in the default driver capabilities. This will,
for example be the case on a RHEL host which only installs the host
native emulator to /usr/bin. The user can have built a custom QEMU
for non-native arches into $HOME and wish to use that.
Aside from validation, this call is also used to fill in a machine type
for the guest if not otherwise specified. Again, this data may be
incorrect for the QEMU driver because it is not taking account of
the emulator binary that is referenced.
To start fixing this, move the validation to the post-parse callbacks
where more intelligent driver specific logic can be applied.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When parsing the guest XML we must fill in the default guest arch if it
is not already present because later parts of the parsing process need
this information.
If no arch is specified we lookup the first guest in the capabilities
data matching the os type and virt type. In most cases this will result
in picking the host architecture but there are some exceptions...
- The test driver is hardcoded to always use i686 arch
- The VMWare/ESX drivers will always place i686 guests ahead
of x86_64 guests in capabilities, so effectively they always
use i686
- The QEMU driver can potentially return any arch at all
depending on what combination of QEMU binaries are installed.
The domain XML hardware configurations are inherently architecture
specific in many places. As a result whomever/whatever created the
domain XML will have had a particular architecture in mind when
specifying the config. In pretty much any sensible case this arch
will have been the native host architecture. i686 on x86_64 is
the only sensible divergance because both these archs are
compatible from a domaain XML config POV.
IOW, although the QEMU driver can pick an almost arbitrary arch as its
default, in the real world no application or user is likely to be
relying on this default arch being anything other than native.
With all this in mind, it is reasonable to change the XML parser to
allow the default architecture to be passed via the domain XML options
struct. If no info is explicitly given then it is safe & sane to pick
the host native architecture as the default for the guest.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Moving their instance parameter to be the first one, and give consistent
ordering of other parameters across all functions. Ensure that the xml
options are passed into both functions in prep for future work.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Our normal practice is for the object type to be the name prefix, and
the object instance be the first parameter passed in.
Rename these to virDomainObjSave and virDomainDefSave moving their
primary parameter to be the first one. Ensure that the xml options
are passed into both functions in prep for future work.
Finally enforce checking of the return type and mark all parameters
as non-NULL.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently the virQEMUCapsPtr objects are just empty. Future patches are
going to expect them to contain real data. Start off by populating the
machine types and arch information.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
As part of a goal to eliminate the need to use virCapsPtr for anything
other than the virConnectGetCapabilies() API impl, cache the host arch
against the QEMU driver struct and use that field directly.
In the tests we move virArchFromHost() globally in testutils.c so that
every test runs with a fixed default architecture reported.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The functions for converting migration typed parameters to QEMU
migration parameters and back were only implemented for integer types.
This patch adds support for string parameters.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
With blockdev we need to refer to the nodename of the disk source image
as the source argument for the blockdev-mirror operation while still
keeping the old job name. With blockdev we must also persist the job in
qemu.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Separate out allocation of the virStorageSource corresponding to the
target NBD export of the migration.
As part of the splitout we allocate the export name explicitly as that
one must not change regardless whether blockdev is used or not to
provide compatibility.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The non-shared-storage migration tracks the storage source used
explicitly in the migration data so we must allow for processing of the
block job which has NULL mirror as the mirror will not be populated.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Now that the cleanup section does not exist remove the label.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qemuMigrationSrcNBDCopyCancelOne uses the block job data structure but
generated it's own job name rather than taking it from the block job
data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
With -blockdev we must use the nodename as the export but we must keep
the name of the export as it was before to ensure compatiblity.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Declare the variable inside the loop with automatic clearing.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qemuDomainBlockJobSetSpeed was not converted to get the job name from
the block job data. This means that after enabling blockdev the API call
would fail as we wouldn't use the appropriate name.
https://bugzilla.redhat.com/show_bug.cgi?id=1780497
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Where appropriate replace the open coded call with the qemu wrapper
which already reports the error.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
With this patch users can cold unplug some sound devices.
use "virsh detach-device vm sound.xml --config" command.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Jidong Xia <xiajidong@cmss.chinamobile.com>
This is a follow-up to patch series posted in
https://www.redhat.com/archives/libvir-list/2019-November/msg01180.html
It implements a suggestion made by Cole in
https://www.redhat.com/archives/libvir-list/2019-November/msg01207.html
and discussed in follow-up messages as there were no objections to the
change.
The aim is to make the code more readable by replacing nested branching
with a flat structure.
Signed-off-by: Pavel Mores <pmores@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In v5.8.0-rc1~122 we've removed the only use of @safename in
qemuMonitorTextLoadSnapshot(). What we are left with is an
declared but not initialized variable that is passed to
VIR_FREE().
Caught by libvirt-php test suite.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In v5.9.0-370-g8fa0374c5b I've tried to fix a bug by removing
some stale XATTRs in qemuProcessStop(). However, I forgot to
do nothing when the VIR_QEMU_PROCESS_STOP_NO_RELABEL flag was
specified.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Until now we only really aborted migration via qemuDomainAbortJob. This
will change with the upcoming addition of the backup job. Additionally
there were a bunch of if statements checking various aspects of the
current job.
To make it more obvious convert qemuDomainAbortJob to use a switch
statement and move the individual conditions to the appropriate job
type.
Every job type has now it's own case despite multiple job types just
plainly cancelling the job for clarity and future extension.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Following patch will refactor qemuDomainAbortJob to use a per-job-type
switch where we will need to abort a migration job in various branches.
Save some code duplication by introducing a helper.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
As part of a goal to eliminate Perl from libvirt build tools,
rewrite the pdwtags processing script in Python.
The original inline shell and perl code was completely
unintelligible. The new python code is a manual conversion
that attempts todo basically the same thing.
Tested-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Introduced in c8007fdc5d, it should use 'greater than max' instead of
'equal or greater than max' for the condition of checking invalid scsi
unit.
Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If we static link to libvirt_util.la then we can't override functions in
this file by simply implementing them in the test code. Any tests should
dynamic link to the main libvirt.la and ensure symbols are exported.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We clear some capabilities here so the lockouts need to be
re-evaluated.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Blockdev is required to do incremental backups properly. Add a helper
function for locking out capabilities and export it to allow re-doing
the processing if a different code path modifies capabilities.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Checking whether a qemu capability set right before clearing it without
any other logic doesn't make sense.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Do all post-processing of capabilities in qemuProcessPrepareQEMUCaps.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Move the post-processing of the QEMU_CAPS_CHARDEV_FD_PASS flag to the
new function.
The clearing of the capability is based on the presence of
VIR_QEMU_PROCESS_START_STANDALONE so we must also pass in the process
start flags.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Start aggregating all capability post-processing code in one place.
The comment was modified while moving it as it was mentioning floppies
which are no longer clearing the blockdev capability.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function is now used only in qemu_process.c so move it there and
name it 'qemuProcessPrepareQEMUCaps' which is more appropriate to what
it's doing.
The reworded comment now mentions that it will also post-process the
caps for VM startup.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The redetection was originally added in 43c01d3838 as a way to recover
from libvirtd upgrade from the time when we didn't persist the qemu
capabilities in the status XML. Also this the oldest supported qemu by
more than two years.
Even if somebody would have a running VM running at least qemu 1.5 with
such an old libvirt we certainly wouldn't do the right thing by
redetecting the capabilities and then trying to communicate with qemu.
For now it will be the best to just stop considering this scenario any
more and error out for such VM.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit c90fb5a828 added explicit use of the private copy of the qemu
capabilities to various places. The change to qemuProcessInit was bogus
though as at the point where we re-initiate the post parse callbacks
priv->qemuCaps is still NULL as we clear it after shutdown of the VM and
don't initiate it until a later point.
Using the value from priv->qemuCaps might mislead readers of the code
into thinking that something useful is being passed at that point so go
with an explicit NULL instead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemuDomainGetJobInfo didn't always reset the return data in @info.
Thankfully this wouldn't be a problem as the RPC layer does it but we
should do it anyways.
Since we reset the struct we don't have to set the type to
VIR_DOMAIN_JOB_NONE as the value is 0.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
virDomainGetJobStats destroys the completed statistics on the first
read. Give the user possibility to keep them around if they wish so.
Add a flag VIR_DOMAIN_JOB_STATS_KEEP_COMPLETED which will read the stats
without destroying them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
For managed save we can choose between various compression
methods. I randomly tested the 'xz' program on a 8 GB guest
and was surprised to have to wait > 50 minutes for it to
finish compressing, with 'xz' burning 100% cpu for the
entire time. Despite the impressive compression, this is
completely useless in the real world as it is far too long
to wait to save the VM.
The 'xz' binary defaults to '-6' optimization level which
aims for high compression, with moderate memory usage,
at the expense of speed.
This change switches it to use the '-3' optimization level
which is documented as being the one that optimizes speed
at expense of compression. Even with this, it will still
outperform all the other options in terms of compression
level. It is a little less than x4 faster than '-6' which
means it starts to be a viable choice to use 'xz' for
people who really want best compression.
The test results on a 1 GB, fairly freshly booted VM are
as follows
format | save | restore size
=======+=======+=============
raw | 05s | 1s | 428 MB
lzop | 05s | 3s | 160 MB
gzip | 29s | 5s | 118 MB
bz2 | 54s | 22s | 114 MB
xz | 4m37s | 13s | 86 MB
xz -3 | 1m20s | 12s | 95 MB
Based on this we can say
* For moderate compression with no noticable loss in speed
=> use lzop
* For high compression with moderate loss in speed
=> use gzip
* For best compression with significant loss in speed
=> use xz
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is a very simple and straightforward implementation of the opposite
what buildPool does for the disk backend.
The background for this change comes from an existing test case in TCK
which does use the delete method for a pool of type disk, but it
truly could not have ever worked since the implementation simply
wasn't there for the pool of type disk.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit 4b58fdf280 which enabled block copy also for network
destinations needed to limit when the 'mirror' storage source is
initialized in cases when we e.g. don't have an appropriate backend.
Limiting it just to virStorageFileSupportsCreate is too restrictive as
for example we can't precreate block devices and thus wouldn't
initialize the 'mirror' but since it's a local source we'd try to
examine it. This would fail since it wouldn't be initialized.
Fix it by introducing a more granular check whether certain operations
are supported and fix the check interlocks.
https://bugzilla.redhat.com/show_bug.cgi?id=1778058
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We tolerate image format detection during block copy in very specific
circumstances, but the code didn't error out on failure of the format
detection.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The API XML files are generated files, so live in the build dir not the
source dir.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In v5.9.0-273-g8ecab214de I've tried to fix a lock ordering
problem, but introduced a crasher. Problem is that because the
client lock is unlocked (in order to honour lock ordering) the
stream we are currently checking in daemonStreamFilter() might be
freed and thus stream->priv might not even exist when the control
get to virMutexLock() call.
To resolve this, grab an extra reference to the stream and handle
its cleanup should the refcounter reach zero after the deref.
If that's the case and we are the only ones holding a reference
to the stream, we MUST return a positive value to make
virNetServerClientDispatchRead() break its loop where it iterates
over filters. The problem is, if we did not do so, then
"filter = filter->next" line will read from a memory that was
just freed (freeing a stream also unregisters its filter).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In commit 2ccb5335dc I've refactored how we fill the typed parameters
for domain statistics. The commit introduced a regression in the
formating of stats for IOthreads by using the array index to label the
entries as it's common for all other types of statistics rather than
the iothread IDs used for iothreads.
Since only the design of iothread deviates from the common approach used
in all other statistic types this was not caught.
https://bugzilla.redhat.com/show_bug.cgi?id=1778014
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The original implementation used QEMU_ADD_COUNT_PARAM which added the
'count' suffix, but 'cnt' was documented. Fix the documentation to
conform with the original implementation.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The virTypedParamsFilter function doesn't mind params == NULL if nparams
is zero. And there's no need to check for params == NULL && nparams > 0
because this is checked higher in the stack.
In fact all the virCheckNonNull* checks in virTypedParamsFilter are
useless.
https://bugzilla.redhat.com/show_bug.cgi?id=1777094
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Now that we have a separate job type which will not trigger normal code
paths for terminating job we can remove the ad-hoc handling.
This possibly fixes the issue of a broken job inheriting the disk and
then finishing in which case we'd not detach the backing chain.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
To better track jobs we couldn't parse let's introduce a new job type
which will clarify semantics internally in few places.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
We will need to clear per-job type data when we will be marking a
blockjob as broken in the new way. Extract the code for future reuse.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Both failure to refresh and to dismiss the job are very unlikely but if
they happen there's not much we can do about the blockjob.
The concluded job handlers treat it as if the job failed if we don't
update the state to 'QEMU_BLOCKJOB_STATE_COMPLETED' which is probably
the safest thing to do here.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Otherwise it would get dropped later on as untracked despite us knowing
about it. Additionally since we cancelled it we must wait to dismiss it
which would not be possible if we unregister it. This also opened a
window for a race condition since the job state change event of the
just-cancelled job might be delivered prior to us unregistering the job
in which case everything would work properly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Since we don't know what happened to the job we can't do much about it
but we can at least log that this happened.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
We must exit the monitor prior to refusing other work, otherwise the VM
object will become unusable.
This bug was introduced in commit v5.5.0-244-gc412383796 but thankfully
the code path was not excercised without QEMU_CAPS_BLOCKDEV.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Block jobs may be members of async jobs so it makes more sense to
refresh block job state after we do steps for async job recovery.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
qemu returns an error message in the job statistics even if the job was
cancelled to emphasize it was not successful. Libvirt didn't properly
transform it into QEMU_BLOCKJOB_STATE_CANCELLED though.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Commit ed56851f1b didn't wire up fetching of the statistics for the
job which are reported by 'query-jobs'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
The magic number is taken from the coreutils stat.c file since
there is no constant for it in normal system headers.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This reverts commit 421c9550f5
qemuDomainBlockPullCommon calls virDomainObjEndAPI internally so the
original commit made us shed two references of @vm instead of one
getting us into a premature free of @vm.
This is not a straight revert as qemuDomainBlockPull was modified
meanwhile. I've also added a warning comment that @vm is consumed.
https://bugzilla.redhat.com/show_bug.cgi?id=1777230
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are two daemons that wait for acquiring their pid files:
virtnetworkd and virtstoraged. This is undesirable as the idea
is to quit early if unable to acquire the pid file.
Fixes: v5.6.0-rc1~207.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
In the past the network driver was (mistakenly) being called for all
interfaces, not just those of type='network', and so it had a chance
to validate all interface configs after the actual type of the
interface was known.
But since the network driver has been more completely/properly
separated from qemu, the network driver isn't called during the
startup of any interfaces except those with type='network', so this
validation no longer takes place for, e.g. <interface type='bridge'>
(or direct, etc). This in turn meant that a config could erroneously
specify a vlan tag, or bandwidth settings, for a type of interface
that didn't support it, and the domain would start without complaint,
just silently ignoring those settings.
This patch moves those validation checks out of the network driver,
and into virDomainActualNetDefValidate() so they will be done for all
interfaces, not just type='network'.
https://bugzilla.redhat.com/1741121
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
<interface> devices (virDomainNetDef) are a bit different from other
types of devices in that their actual type may come from a network (in
the form of a port connection), and that doesn't happen until the
domain is started. This means that any validation of an <interface> at
parse time needs to be a bit liberal in what it accepts - when
type='network', you could think that something is/isn't allowed, but
once the domain is started and a port is created by the configured
network, the opposite might be true.
To solve this problem hypervisor drivers need to do an extra
validation step when the domain is being started. I recently (commit
3cff23f7, libvirt 5.7.0) added a function to peform such validation
for all interfaces to the QEMU driver -
qemuDomainValidateActualNetDef() - but while that function is a good
single point to call for the multiple places that need to "start" an
interface (domain startup, device hotplug, device update), it can't be
called by the other hypervisor drivers, since 1) it's in the QEMU
driver, and 2) it contains some checks specific to QEMU. For
validation that applies to network devices on *all* hypervisors, we
need yet another interface validation function that can be called by
any hypervisor driver (not just QEMU) right after its network port has
been created during domain startup or hotplug. This patch adds that
function - virDomainActualNetDefValidate(), in the conf directory,
and calls it in appropriate places in the QEMU, lxc, and libxl
drivers.
This new function is the place to put all network device validation
that 1) is hypervisor agnostic, and 2) can't be done until we know the
"actual type" of an interface.
There is no framework for validation at domain startup as there is for
post-parse validation, but I don't want to create a whole elaborate
system that will only be used by one type of device. For that reason,
I just made a single function that should be called directly from the
hypervisors, when they are initializing interfaces to start a domain,
right after conditionally allocating the network port (and regardless
of whether or not that was actually needed). In the case of the QEMU
driver, qemuDomainValidateActualNetDef() is already called in all the
appropriate places, so we can just call the new function from
there. In the case of the other hypervisors, we search for
virDomainNetAllocateActualDevice() (which is the hypervisor-agnostic
function that calls virNetworkPortCreateXML()), and add the call to our
new function right after that.
The new function itself could be plunked down into many places in the
code, but we already have 3 validation functions for network devices
in 2 different places (not counting any basic validation done in
virDomainNetDefParseXML() itself):
1) post-parse hypervisor-agnostic
(virDomainNetDefValidate() - domain_conf.c:6145)
2) post-parse hypervisor-specific
(qemuDomainDeviceDefValidateNetwork() - qemu_domain.c:5498)
3) domain-start hypervisor-specific
(qemuDomainValidateActualNetDef() - qemu_domain.c:5390)
I placed (3) right next to (2) when I added it, specifically to avoid
spreading validation all over the code. For the same reason, I decided
to put this new function right next to (1) - this way if someone needs
to add validation specific to qemu, they go to one location, and if
they need to add validation applying to everyone, they go to the
other. It looks a bit strange to have a public function in between a
bunch of statics, but I think it's better than the alternative of
further fragmentation. (I'm open to other ideas though, of course.)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
These all just return a scalar value, so there's no daisy-chained
fallout from changing them, and they can easily be combined in a
single patch.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
This also isn't required (due to the vportprofile being stored in the
NetDef as a pointer rather than being directly contained), but it
seemed dishonest to not mark it as const (and thus permit users to
modify its contents)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
In this case, the virNetDevBandwidthPtr that is returned is not to a
region within the virDomainNetDef arg, but points elsewhere (the
NetDef has the pointer, not the entire object), so technically it's
not necessary to make the return value a const, but it's a bit
disingenuous to *not* do it.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
This is needed if we want to call the function when the
virDomainNetDef* we have is a const.
Since virDomainNetGetActualVlan returns a pointer to memory that is
within the virDomainNetDefPtr arg, the returned pointer must also be
made const. This leads to a cascade of other virNetDevVlanPtr's that
must be changed to "const virNetDevVlan *".
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
This makes it easier to understand which interface's config caused the
error.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
