When qemu cannot start, we may call qemuProcessStop() twice.
We have check whether the vm is running at the beginning of
qemuProcessStop() to avoid libvirt deadlock. We call
qemuProcessStop() with driver and vm locked. It seems that
we can avoid libvirt deadlock. But unfortunately we may
unlock driver and vm in the function qemuProcessKill() while
vm->def->id is not -1. So qemuProcessStop() will be run twice,
and monitor will be freed unexpectedly. So we should set
vm->def->id to -1 at the beginning of qemuProcessStop().
An upstream gnulib bug[1] meant that some of our syntax checks
weren't being run. Fix up our offenders before we upgrade to
a newer gnulib.
[1] https://lists.gnu.org/archive/html/bug-gnulib/2012-03/msg00194.html
* src/util/virnetdevtap.c (virNetDevTapCreate): Use flags.
* tests/lxcxml2xmltest.c (mymain): Strip useless ().
In the current V3 migration protocol, Libvirt does not
check the result of the function
qemuMigrationVPAssociatePortProfiles
This means that it is possible for a migration to complete
successfully even when the VM loses network connectivity on
the destination host.
With this change libvirt aborts the migration
(during the "finish" step) when the above function fails, that
is to say when at least one of the port profile associations fails.
Signed-off by: Christian Benvenuti <benve@cisco.com>
libvirt documentation for channels with type 'spicevmc' says that the
'target' child node has:
"an optional attribute name controls how the guest will have access
to the channel, and defaults to name='com.redhat.spice.0'."
However, this default value is never set in libvirt code base,
there's only a check in qemu_command.c to error out if the name
attribute doesn't have the expected value (if it's set).
This commit sets a default target name for spicevmc channels during
the domain configuration parsing so that the code agrees with the
documentation.
Commit d42a2ff caused a regression in creating a disk-only snapshot
of a qcow2 disk; by passing the wrong variable to the monitor call,
libvirt ended up creating JSON that looked like "format":null instead
of the intended "format":"qcow2".
To make it easier to diagnose this in the future, make JSON creation
error out if "s:arg" is paired with NULL (it is still possible to
use "n:arg" in the rare cases where qemu will accept a null).
* src/qemu/qemu_driver.c
(qemuDomainSnapshotCreateSingleDiskActive): Pass correct value.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONMakeCommandRaw):
Improve error message.
Pass argv to the init binary of LXC, using a new <initarg> element.
* docs/formatdomain.html.in: Document <os> usage for containers
* docs/schemas/domaincommon.rng: Add <initarg> element
* src/conf/domain_conf.c, src/conf/domain_conf.h: parsing and
formatting of <initarg>
* src/lxc/lxc_container.c: Setup LXC argv
* tests/Makefile.am, tests/lxcxml2xmldata/lxc-systemd.xml,
tests/lxcxml2xmltest.c, tests/testutilslxc.c,
tests/testutilslxc.h: Test parsing/formatting of LXC related
XML parts
The SELinux mount point moved from /selinux to /sys/fs/selinux
when systemd came along.
* configure.ac: Probe for SELinux mount point
* src/lxc/lxc_container.c: Use SELinux mount point determined
by configure.ac
When libvirtd is restarted, also restart the netlink event
message callbacks for existing VEPA connections and send
a message to lldpad for these existing links, so it learns
the new libvirtd pid.
Signed-off-by: D. Herrendoerfer <d.herrendoerfer@herrendoerfer.name>
This avoids possible deadlock of the qemu driver in case a domain is
begin migrated (in Begin phase) and unrelated connection to qemu driver
is closed at the right time.
I checked all callers of qemuDomainCheckEjectableMedia() and they are
calling this function with qemu driver locked.
Found when attempting to build on Fedora 17 alpha with:
./autogen.sh --system --enable-compile-warnings=error
(this same build command works without problem on Fedora 16). Since
the consumer of the qemuProcessReconnectData doesn't assume that the
other fields of the struct are initialized (although it uses them
internally), the simpler solution is to just switch to C99-style
struct initialization (which doesn't require specification of all
fields).
libvirt always adds -Werror-frame-larger-than=4096 to the flags when
it builds. When building on Fedora 17, two functions with multiple
1024 buffers declared inside if {} blocks would generate frame size
errors; apparently the version of gcc on Fedora 16 will merge these
multiple buffers into a single buffer even when optimization is off,
but Fedora 17 won't.
The fix is to declare a single 1024 buffer at the top of the two
offending functions, and reuse the single buffer throughout the
functions.
Return statements with parameter enclosed in parentheses were modified
and parentheses were removed. The whole change was scripted, here is how:
List of files was obtained using this command:
git grep -l -e '\<return\s*([^()]*\(([^()]*)[^()]*\)*)\s*;' | \
grep -e '\.[ch]$' -e '\.py$'
Found files were modified with this command:
sed -i -e \
's_^\(.*\<return\)\s*(\(\([^()]*([^()]*)[^()]*\)*\))\s*\(;.*$\)_\1 \2\4_' \
-e 's_^\(.*\<return\)\s*(\([^()]*\))\s*\(;.*$\)_\1 \2\3_'
Then checked for nonsense.
The whole command looks like this:
git grep -l -e '\<return\s*([^()]*\(([^()]*)[^()]*\)*)\s*;' | \
grep -e '\.[ch]$' -e '\.py$' | xargs sed -i -e \
's_^\(.*\<return\)\s*(\(\([^()]*([^()]*)[^()]*\)*\))\s*\(;.*$\)_\1 \2\4_' \
-e 's_^\(.*\<return\)\s*(\([^()]*\))\s*\(;.*$\)_\1 \2\3_'
When qparams support was dropped in commit bc1ff160, we forgot
to add tests to ensure that viruri can do the same round trip
handling of a URI. This round trip was broken, due to use
of the old 'query' field of xmlUriPtr, instead of the new
'query_raw'
Also, we forgot to report an OOM error.
* tests/viruritest.c (mymain): Add tests based on just-deleted
qparamtest.
(testURIParse): Allow difference in input and expected output.
* src/util/viruri.c (virURIFormat): Add missing error. Use
query_raw, instead of query for xmlUriPtr object.
The oVirt developers have stated that the real reasons they want
to have qemu reuse existing volumes when creating a snapshot are:
1. the management framework is set up so that creation has to be
done from a central node for proper resource tracking, and having
libvirt and/or qemu create things violates the framework, and
2. qemu defaults to creating snapshots with an absolute path to
the backing file, but oVirt wants to manage a backing chain that
uses just relative names, to allow for easier migration of a chain
across storage locations.
When 0.9.10 added VIR_DOMAIN_SNAPSHOT_CREATE_REUSE_EXT (commit
4e9953a4), it only addressed point 1, but libvirt was still using
O_TRUNC which violates point 2. Meanwhile, the new qemu
'transaction' monitor command includes a new optional mode argument
that will force qemu to reuse the metadata of the file it just
opened (with the burden on the caller to have valid metadata there
in the first place). So, this tweaks the meaning of the flag to
cover both points as intended for use by oVirt. It is not strictly
backward-compatible to 0.9.10 behavior, but it can be argued that
the O_TRUNC of 0.9.10 was a bug.
Note that this flag is all-or-nothing, and only selects between
'existing' and the default 'absolute-paths'. A more flexible
approach that would allow per-disk selections, as well as adding
support for the 'no-backing-file' mode, would be possible by
extending the <domainsnapshot> xml to have a per-disk mode, but
until we have a management application expressing a need for that
additional complexity, it is not worth doing.
* src/libvirt.c (virDomainSnapshotCreateXML): Tweak documentation.
* src/qemu/qemu_monitor.h (qemuMonitorDiskSnapshot): Add
parameters.
* src/qemu/qemu_monitor_json.h (qemuMonitorJSONDiskSnapshot):
Likewise.
* src/qemu/qemu_monitor.c (qemuMonitorDiskSnapshot): Pass them
through.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONDiskSnapshot): Use
new monitor command arguments.
* src/qemu/qemu_driver.c (qemuDomainSnapshotCreateDiskActive)
(qemuDomainSnapshotCreateSingleDiskActive): Adjust callers.
(qemuDomainSnapshotDiskPrepare): Allow qed, modify rules on reuse.
The hardest part about adding transactions is not using the new
monitor command, but undoing the partial changes we made prior
to a failed transaction.
* src/qemu/qemu_driver.c (qemuDomainSnapshotCreateDiskActive): Use
transaction when available.
(qemuDomainSnapshotUndoSingleDiskActive): New function.
(qemuDomainSnapshotCreateSingleDiskActive): Pass through actions.
(qemuDomainSnapshotCreateXML): Adjust caller.
QEmu 1.1 is adding a 'transaction' command to the JSON monitor.
Each element of a transaction corresponds to a top-level command,
with the additional guarantee that the transaction flushes all
pending I/O, then guarantees that all actions will be successful
as a group or that failure will roll back the state to what it
was before the monitor command. The difference between a
top-level command:
{ "execute": "blockdev-snapshot-sync", "arguments":
{ "device": "virtio0", ... } }
and a transaction:
{ "execute": "transaction", "arguments":
{ "actions": [
{ "type": "blockdev-snapshot-sync", "data":
{ "device": "virtio0", ... } } ] } }
is just a couple of changed key names and nesting the shorter
command inside a JSON array to the longer command. This patch
just adds the framework; the next patch will actually use a
transaction.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONMakeCommand): Move
guts...
(qemuMonitorJSONMakeCommandRaw): ...into new helper. Add support
for array element.
(qemuMonitorJSONTransaction): New command.
(qemuMonitorJSONDiskSnapshot): Support use in a transaction.
* src/qemu/qemu_monitor_json.h (qemuMonitorJSONDiskSnapshot): Add
argument.
(qemuMonitorJSONTransaction): New declaration.
* src/qemu/qemu_monitor.h (qemuMonitorTransaction): Likewise.
(qemuMonitorDiskSnapshot): Add argument.
* src/qemu/qemu_monitor.c (qemuMonitorTransaction): New wrapper.
(qemuMonitorDiskSnapshot): Pass argument on.
* src/qemu/qemu_driver.c
(qemuDomainSnapshotCreateSingleDiskActive): Update caller.
Taking an external snapshot of just one disk is atomic, without having
to pause and resume the VM. This also paves the way for later patches
to interact with the new qemu 'transaction' monitor command.
The various scenarios when requesting atomic are:
online, 1 disk, old qemu - safe, allowed by this patch
online, more than 1 disk, old qemu - failure, this patch
offline snapshot - safe, once a future patch implements offline disk snapshot
online, 1 or more disks, new qemu - safe, once future patch uses transaction
Taking an online system checkpoint snapshot is atomic, since it is
done via a single 'savevm' monitor command. Taking an offline system
checkpoint snapshot is atomic, thanks to the previous patch.
* src/qemu/qemu_driver.c (qemuDomainSnapshotCreateXML): Support
new flag for single-disk setups.
(qemuDomainSnapshotDiskPrepare): Check for atomic here.
(qemuDomainSnapshotCreateDiskActive): Skip pausing the VM when
atomic supported.
(qemuDomainSnapshotIsAllowed): Use bool instead of int.
Offline internal snapshots can be rolled back with just a little
bit of refactoring, meaning that we are now automatically atomic.
* src/qemu/qemu_domain.c (qemuDomainSnapshotForEachQcow2): Move
guts...
(qemuDomainSnapshotForEachQcow2Raw): ...to new helper, to allow
rollbacks.
Right now, it is appallingly easy to cause qemu disk snapshots
to alter a domain then fail; for example, by requesting a two-disk
snapshot where the second disk name resides on read-only storage.
In this failure scenario, libvirt reports failure, but modifies
the live domain XML in-place to record that the first disk snapshot
was taken; and places a difficult burden on the management app
to grab the XML and reparse it to see which disks, if any, were
altered by the partial snapshot.
This patch adds a new flag where implementations can request that
the hypervisor make snapshots atomically; either no changes to
XML occur, or all disks were altered as a group. If you request
the flag, you either get outright failure up front, or you take
advantage of hypervisor abilities to make an atomic snapshot. Of
course, drivers should prefer the atomic means even without the
flag explicitly requested.
There's no way to make snapshots 100% bulletproof - even if the
hypervisor does it perfectly atomic, we could run out of memory
during the followup tasks of updating our in-memory XML, and report
a failure. However, these sorts of catastrophic failures are rare
and unlikely, and it is still nicer to know that either all
snapshots happened or none of them, as that is an easier state to
recover from.
* include/libvirt/libvirt.h.in
(VIR_DOMAIN_SNAPSHOT_CREATE_ATOMIC): New flag.
* src/libvirt.c (virDomainSnapshotCreateXML): Document it.
* tools/virsh.c (cmdSnapshotCreate, cmdSnapshotCreateAs): Expose it.
* tools/virsh.pod (snapshot-create, snapshot-create-as): Document
it.
We need a capability bit to gracefully error out if some of the
additions in future patches can't be implemented by the running qemu.
* src/qemu/qemu_capabilities.h (QEMU_CAPS_TRANSACTION): New cap.
* src/qemu/qemu_capabilities.c (qemuCaps): Name it.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONCheckCommands): Set
it.
Recent changes have caused build failures on systems where pdwtags works:
commit a26a196 mistakenly exported a public variable
commits a26a196, 57ddcc2, 487c063 all had copy-paste bugs in
hand-updating the golden API rather than rerunning pdwtags
* include/libvirt/libvirt.h.in (virDomainEventTrayChangeReason):
Make this a typedef, not external storage.
* src/remote_protocol-structs (remote_procedure): Fix spelling.
This introduces a new running reason VIR_DOMAIN_RUNNING_WAKEUP,
and new suspend event type VIR_DOMAIN_EVENT_STARTED_WAKEUP.
While a wakeup event is emitted, the domain which entered into
VIR_DOMAIN_PMSUSPENDED will be transferred to "running"
with reason VIR_DOMAIN_RUNNING_WAKEUP, and a new domain lifecycle
event emitted with type VIR_DOMAIN_EVENT_STARTED_WAKEUP.
This introduces a new domain state pmsuspended to represent
the domain which has been suspended by guest power management,
e.g. (entered itno s3 state). Because a "running" state could
be confused in this case, one will see the guest is paused
actually while playing. And state "paused" is for the domain
which was paused by virDomainSuspend.
This patch introduces a new event type for the QMP event
SUSPEND:
VIR_DOMAIN_EVENT_ID_PMSUSPEND
The event doesn't take any data, but considering there might
be reason for wakeup in future, the callback definition is:
typedef void
(*virConnectDomainEventSuspendCallback)(virConnectPtr conn,
virDomainPtr dom,
int reason,
void *opaque);
"reason" is unused currently, always passes "0".
This patch introduces a new event type for the QMP event
WAKEUP:
VIR_DOMAIN_EVENT_ID_PMWAKEUP
The event doesn't take any data, but considering there might
be reason for wakeup in future, the callback definition is:
typedef void
(*virConnectDomainEventWakeupCallback)(virConnectPtr conn,
virDomainPtr dom,
int reason,
void *opaque);
"reason" is unused currently, always passes "0".
This is similiar with physical world, one will be surprised if the
box starts with medium exists while the tray is open.
New tests are added, tests disk-{cdrom,floppy}-tray are for the qemu
supports "-device" flag, and disk-{cdrom,floppy}-no-device-cap are
for old qemu, i.e. which doesn't support "-device" flag.
This patch introduces a new event type for the QMP event
DEVICE_TRAY_MOVED, which occurs when the tray of a removable
disk is moved (i.e opened or closed):
VIR_DOMAIN_EVENT_ID_TRAY_CHANGE
The event's data includes the device alias and the reason
for tray status' changing, which indicates why the tray
status was changed. Thus the callback definition for the event
is:
enum {
VIR_DOMAIN_EVENT_TRAY_CHANGE_OPEN = 0,
VIR_DOMAIN_EVENT_TRAY_CHANGE_CLOSE,
\#ifdef VIR_ENUM_SENTINELS
VIR_DOMAIN_EVENT_TRAY_CHANGE_LAST
\#endif
} virDomainEventTrayChangeReason;
typedef void
(*virConnectDomainEventTrayChangeCallback)(virConnectPtr conn,
virDomainPtr dom,
const char *devAlias,
int reason,
void *opaque);
Libvirt on x86 parses 'dmidecode' to gather characteristics of host
system. On PowerPC, this is now implemented by reading /proc/cpuinfo
NOTE: memory-DIMM information is not presently implemented.
Acked-by: Daniel Veillard <veillard@redhat.com>
Acked-by: Daniel P Berrange <berrange@redhat.com>
Signed-off-by: Prerna Saxena <prerna@linux.vnet.ibm.com>
When SASL requests auth credentials, try to look them up in the
config file first. If any are found, remove them from the list
that the user is prompted for
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
SASL may prompt for credentials after either a 'start' or 'step'
invocation. In both cases the code to handle this is the same.
Refactor this code into a separate method to reduce the duplication,
since the complexity is about to grow
* src/remote/remote_driver.c: Refactor interaction with SASL
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Ensure that the functions in virauth.h have names matching the file
prefix, by renaming virRequest{Username,Password} to
virAuthGet{Username,Password}
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To follow latest naming conventions, rename src/util/authhelper.[ch]
to src/util/virauth.[ch].
* src/util/authhelper.[ch]: Rename to src/util/virauth.[ch]
* src/esx/esx_driver.c, src/hyperv/hyperv_driver.c,
src/phyp/phyp_driver.c, src/xenapi/xenapi_driver.c: Update
for renamed include files
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The '.ini' file format is a useful alternative to the existing
config file style, when you need to have config files which
are hashes of hashes. The 'virKeyFilePtr' object provides a
way to parse these file types.
* src/Makefile.am, src/util/virkeyfile.c,
src/util/virkeyfile.h: Add .ini file parser
* tests/Makefile.am, tests/virkeyfiletest.c: Test
basic parsing capabilities
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Convert drivers currently using the qparams APIs, to instead
use the virURIPtr query parameters directly.
* src/esx/esx_util.c, src/hyperv/hyperv_util.c,
src/remote/remote_driver.c, src/xenapi/xenapi_utils.c: Remove
use of qparams
* src/util/qparams.h, src/util/qparams.c: Delete
* src/Makefile.am, src/libvirt_private.syms: Remove qparams
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Avoid the need for each driver to parse query parameters itself
by storing them directly in the virURIPtr struct. The parsing
code is a copy of that from src/util/qparams.c The latter will
be removed in a later patch
* src/util/viruri.h: Add query params to virURIPtr
* src/util/viruri.c: Parse query parameters when creating virURIPtr
* tests/viruritest.c: Expand test to cover params
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Instead of just typedef'ing the xmlURIPtr struct for virURIPtr,
use a custom libvirt struct. This allows us to fix various
problems with libxml2. This initially just fixes the query vs
query_raw handling problems.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The parameter in the virURIFormat impl mistakenly used the
xmlURIPtr type, instead of virURIPtr. Since they will soon
cease to be identical, this needs fixing
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Since we defined a custom virURIPtr type, we should use a
virURIFree method instead of assuming it will always be
a typedef for xmlURIPtr
* src/util/viruri.c, src/util/viruri.h, src/libvirt_private.syms:
Add a virURIFree method
* src/datatypes.c, src/esx/esx_driver.c, src/libvirt.c,
src/qemu/qemu_migration.c, src/vmx/vmx.c, src/xen/xend_internal.c,
tests/viruritest.c: s/xmlFreeURI/virURIFree/
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When a client which started non-p2p migration dies in a bad time, the
source libvirtd never clears the migration job and almost nothing can be
done with the domain without restarting the daemon. This patch makes use
of connection close callbacks and ensures that migration job is properly
discarded when the client disconnects.
Destination daemon should not rely on the client or source daemon
(depending on the type of migration) to call Finish when migration
fails, because the client may crash before it can do so. The domain
prepared for incoming migration is set to be destroyed (and migration
job cleaned up) when connection with the client closes but this is not
enough. If the associated qemu process crashes after Prepare step and
the domain is cleaned up before the connection gets closed, autodestroy
is not called for the domain and migration jobs remains set. In case the
domain is defined on destination host (i.e., it is not completely
removed once destroyed) we keep the job set for ever. To fix this, we
register a cleanup callback which is responsible to clean migration-in
job when a domain dies anywhere between Prepare and Finish steps. Note
that we can't blindly clean any job when spotting EOF on monitor since
normally an API is running at that time.
This reverts commit 61f2b6ba5f and most of
commit d8916dc8e2, which effectively
brings back commit ef1065cf5a written by
Jim Fehlig:
The qemu migration speed default is 32MiB/s as defined in migration.c
/* Migration speed throttling */
static int64_t max_throttle = (32 << 20);
There's no need to throttle migration when targeting a file, so set
migration speed to unlimited prior to migration, and restore to libvirt
default value after migration.
Default units is MB for migrate_set_speed monitor command, so
(INT64_MAX / (1024 * 1024)) is used for unlimited migration speed.
This was reverted because migration to file could not be canceled and
even monitored since qemu was not processing any monitor commands until
the migration finished. This is now different as we make sure the
file descriptor we pass to qemu is able to properly report EAGAIN.
Recent qemu changes might have helped as well.
I tested managedsave with this patch in and indeed, it is 10x faster
while I can still monitor its progress.
A few times libvirt users manually setting mac addresses have
complained of a networking failure that ends up being due to a multicast
mac address being used for a guest interface. This patch prevents that
by logging an error and failing if a multicast mac address is
encountered in each of the three following cases:
1) domain xml <interface> mac address.
2) network xml bridge mac address.
3) network xml dhcp/host mac address.
There are several other places where a mac address can be input that
aren't controlled in this manner because failure to do so has no
consequences (e.g., if the address will be used to search through
existing interfaces for a match).
The RNG has been updated to add multiMacAddr and uniMacAddr along with
the existing macAddr, and macAddr was switched to uniMacAddr where
appropriate.
If an error was encountered parsing a dhcp host entry mac address or
name, parsing would continue and log a less descriptive error that
might make it more difficult to notice the true nature of the problem.
This patch returns immediately on logging the first error.
This patch is in response to:
https://bugzilla.redhat.com/show_bug.cgi?id=798467
If a guest's tap device is created using the same MAC address the
guest uses for its own network card (which connects to the tap
device), the Linux kernel will log the following message and traffic
will not pass:
kernel: vnet9: received packet with own address as source address
This patch disallows MAC addresses with a first byte of 0xFE, but only in
the case that the MAC address is used for a guest interface that's
connected by way of a standard tap device. (In other words, the
validation is done at runtime at the same place the MAC address is
modified for the tap device, rather than when mac address is parsed,
the idea being that it is then we know for sure the address will be
problematic.)
Using inheritance, this patch cleans up the cpu_map.xml file and also
sorts all CPU features according to the feature and registry
values. Model features are sorted the same way as foeatures in the
specification.
Also few models that are related were organized together and parts of
the XML are marked with comments
If a guest is paused, we were silently ignoring the quiesce flag,
which results in unclean snapshots, contrary to the intent of the
flag. Since we can't quiesce without guest agent support, we should
instead fail if the guest is not running.
Meanwhile, if we attempt a quiesce command, but the guest agent
doesn't respond, and we time out, we may have left the command
pending on the guest's queue, and when the guest resumes parsing
commands, it will freeze even though our command is no longer
around to issue a thaw. To be safe, we must _always_ pair every
quiesce call with a counterpart thaw, even if the quiesce call
failed due to a timeout, so that if a guest wakes up and starts
processing a command backlog, it will not get stuck in a frozen
state.
* src/qemu/qemu_driver.c (qemuDomainSnapshotCreateDiskActive):
Always issue thaw after a quiesce, even if quiesce failed.
(qemuDomainSnapshotFSThaw): Add a parameter.
This patch fixes a NULL pointer check that was causing SegFault on
some specific configurations. It also reverts commit 59d0c9801c
that was checking for this value in one place.
A common coding pattern for changing blkio parameters is
1. virDomainGetBlkioParameters
2. change one or more params
3. virDomainSetBlkioParameters
For this to work, it must be possible to roundtrip through
the methods without error. Unfortunately virDomainGetBlkioParameters
will return "" for the deviceWeight parameter for guests by default,
which virDomainSetBlkioParameters will then reject as invalid.
This fixes the handling of "" to be a no-op, and also improves the
error message to tell you what was invalid
How to reproduce:
% valgrind -v --leak-check=full virsh migrate mig \
qemu+ssh://$dest/system --unsafe
== 8 bytes in 1 blocks are definitely lost in loss record 1 of 28
== at 0x4A04A28: calloc (vg_replace_malloc.c:467)
== by 0x3EB7115FB8: xdr_reference (in /lib64/libc-2.12.so)
== by 0x3EB7115F10: xdr_pointer (in /lib64/libc-2.12.so)
== by 0x4D1EA84: xdr_remote_string (remote_protocol.c:40)
== by 0x4D1EAD8: xdr_remote_domain_migrate_prepare3_ret (remote_protocol.c:4772)
== by 0x4D2FFD2: virNetMessageDecodePayload (virnetmessage.c:382)
== by 0x4D2789C: virNetClientProgramCall (virnetclientprogram.c:382)
== by 0x4D0707D: callWithFD (remote_driver.c:4549)
== by 0x4D070FB: call (remote_driver.c:4570)
== by 0x4D12AEE: remoteDomainMigratePrepare3 (remote_driver.c:4138)
== by 0x4CF7BE9: virDomainMigrateVersion3 (libvirt.c:4815)
== by 0x4CF9432: virDomainMigrate2 (libvirt.c:5454)
==
== LEAK SUMMARY:
== definitely lost: 8 bytes in 1 blocks
== indirectly lost: 0 bytes in 0 blocks
== possibly lost: 0 bytes in 0 blocks
== still reachable: 126,995 bytes in 1,343 blocks
== suppressed: 0 bytes in 0 blocks
This patch also fixes the leaks in remoteDomainMigratePrepare and
remoteDomainMigratePrepare2.
* src/libvirt.c (virStorageVolResize): correct comment typo according to
virStorageVolResizeFlags enum definition.
Signed-off-by: Alex Jia <ajia@redhat.com>
If no <interface> elements are included in an LXC guest XML
description, then the LXC guest will just see the host's
network interfaces. It is desirable to be able to hide the
host interfaces, without having to define any guest interfaces.
This patch introduces a new feature flag <privnet/> to allow
forcing of a private network namespace for LXC. In the future
I also anticipate that we will add <privuser/> to force a
private user ID namespace.
* src/conf/domain_conf.c, src/conf/domain_conf.h: Add support
for <privnet/> feature. Auto-set <privnet> if any <interface>
devices are defined
* src/lxc/lxc_container.c: Honour request for private network
namespace
Commit e457d5ef20 adds ability to pass the
default URI using the client configuration file. If the file is not
present, it still accesses the NULL config object causing a segfault.
Caught running "make check".
Wire up the domain graphics event notifications for SPICE. Adapted
from a RHEL-only patch written by Dan Berrange that used custom
__com.redhat_SPICE events - equivalent events are now available in
upstream QEMU (including a SPICE_CONNECTED event, which was missing in
the __COM.redhat_SPICE version).
* src/qemu/qemu_monitor_json.c: Wire up SPICE graphics events
Currently if the URI passed to virConnectOpen* is NULL, then we
- Look for LIBVIRT_DEFAULT_URI env var
- Probe for drivers
This changes it so that
- Look for LIBVIRT_DEFAULT_URI env var
- Look for 'uri_default' in $HOME/.libvirt/libvirt.conf
- Probe for drivers
numad is an user-level daemon that monitors NUMA topology and
processes resource consumption to facilitate good NUMA resource
alignment of applications/virtual machines to improve performance
and minimize cost of remote memory latencies. It provides a
pre-placement advisory interface, so significant processes can
be pre-bound to nodes with sufficient available resources.
More details: http://fedoraproject.org/wiki/Features/numad
"numad -w ncpus:memory_amount" is the advisory interface numad
provides currently.
This patch add the support by introducing a new XML attribute
for <vcpu>. e.g.
<vcpu placement="auto">4</vcpu>
<vcpu placement="static" cpuset="1-10^6">4</vcpu>
The returned advisory nodeset from numad will be printed
in domain's dumped XML. e.g.
<vcpu placement="auto" cpuset="1-10^6">4</vcpu>
If placement is "auto", the number of vcpus and the current
memory amount specified in domain XML will be used for numad
command line (numad uses MB for memory amount):
numad -w $num_of_vcpus:$current_memory_amount / 1024
The advisory nodeset returned from numad will be used to set
domain process CPU affinity then. (e.g. qemuProcessInitCpuAffinity).
If the user specifies both CPU affinity policy (e.g.
(<vcpu cpuset="1-10,^7,^8">4</vcpu>) and placement == "auto"
the specified CPU affinity will be overridden.
Only QEMU/KVM drivers support it now.
See docs update in patch for more details.
With current code, we pass true iff domain is cold booting. However,
if disk is inaccessible and startupPolicy for that disk is set to
'requisite' we have to fail iff cold booting.
AMD Bulldozer (or Opteron_G4 as called in QEMU) was added to the list
of cpu models, flags were taken from upstream qemu cpu specifications
and should be sorted by bit values (or first occurence in the feature
specification part of cpu_map.xml).
Based on QEMU upstream commit 885bb0369a4f0abe2c0185178f3cb347cb02cdf1.
Even though we say in documentation setting (tls-)port to -1 is legacy
compat style for enabling autoport, we're roughly doing this for VNC.
However, in case of SPICE auto enable autoport iff both port & tlsPort
are equal -1 as documentation says autoport plays with both.
In qemuDomainDetachNetDevice, detach was being used before it had been
validated. If no matching device was found, this resulted in a
dereference of a NULL pointer.
This behavior was a regression introduced in commit
cf90342be0, so it has not been a part of
any official libvirt release.
When host-model and host-passthrouh CPU modes were introduced, qemu
driver was properly modify to update guest CPU definition during
migration so that we use the right CPU at the destination. However,
similar treatment is needed for (managed)save and snapshots since they
need to save the exact CPU so that a domain can be properly restored.
To avoid repetition of such situation, all places that need live XML
share the code which generates it.
As a side effect, this patch fixes error reporting from
qemuDomainSnapshotWriteMetadata().
Thanks to cgroups, providing user vs. system time of the overall
guest is easy to add to our existing API.
* include/libvirt/libvirt.h.in (VIR_DOMAIN_CPU_STATS_USERTIME)
(VIR_DOMAIN_CPU_STATS_SYSTEMTIME): New constants.
* src/util/virtypedparam.h (virTypedParameterArrayValidate)
(virTypedParameterAssign): Enforce checking the result.
* src/qemu/qemu_driver.c (qemuDomainGetPercpuStats): Fix offender.
(qemuDomainGetTotalcpuStats): Implement new parameters.
* tools/virsh.c (cmdCPUStats): Tweak output accordingly.
As documented in linux.git/Documentation/cgroups/cpuacct.txt,
cpuacct.stat returns user and system time in ticks (the same
unit used in times(2)). It would be a bit nicer if it were like
getrusage(2) and reported timeval contents, or like cpuacct.usage
and in nanoseconds, but we can't be picky.
* src/util/cgroup.h (virCgroupGetCpuacctStat): New function.
* src/util/cgroup.c (virCgroupGetCpuacctStat): Implement it.
(virCgroupGetValueStr): Allow for multi-line files.
* src/libvirt_private.syms (cgroup.h): Export it.
If there is a disk file with a comma in the name, QEmu expects a double
comma instead of a single one (e.g., the file "virtual,disk.img" needs
to be specified as "virtual,,disk.img" in QEmu's command line). This
patch fixes libvirt to work with that feature. Fix RHBZ #801036.
Based on an initial patch by Crístian Viana.
* src/util/buf.h (virBufferEscape): Alter signature.
* src/util/buf.c (virBufferEscape): Add parameter.
(virBufferEscapeSexpr): Fix caller.
* src/qemu/qemu_command.c (qemuBuildRBDString): Likewise. Also
escape commas in file names.
(qemuBuildDriveStr): Escape commas in file names.
* docs/schemas/basictypes.rng (absFilePath): Relax RNG to allow
commas in input file names.
* tests/qemuxml2argvdata/*-disk-drive-network-sheepdog.*: Update
test.
Signed-off-by: Eric Blake <eblake@redhat.com>
We found few more AMD-specific features in cpu64-rhel* models that
made it impossible to start qemu guest on Intel host (with this
setting) even though qemu itself starts correctly with them.
This impacts one test, thus the fix in tests/cputestdata/.
virNetworkDNSHostsDefParseXML was calling VIR_ALLOC(def->hosts) if
def->hosts was NULL. This is a waste of time, though, since
VIR_REALLOC_N is called a few lines further down, prior to any use of
def->hosts. (initializing def->nhosts to 0 is also redundant, because
the newly allocated memory will always be cleared to all 0's anyway).
If user hasn't supplied any tlsPort we default to setting it
to zero in our internal structure. However, when building command
line we test it against -1 which is obviously wrong.
This is nearly identical to an earlier patch for virnetlink.c.
There are special stub versions of all public functions in this file
that are compiled when the platform isn't linux. Each of these
functions had an almost identical message, differing only in the
function name included in the message. Since log messages already
contain the function name, we can just define a const char* with the
common part of the string, and use that same string for all the log
messages.
If nothing else, this at least makes for less strings that need
translating...
This function was freeing a virDomainNetDef with
VIR_FREE(). virDomainNetDef is a complex structure with many pointers
to other dynamically allocated data; to properly free it
virDomainNetDefFree() must be called instead, otherwise several
strings (and potentially other things) will be leaked.
For some reason, although live hotplug of <hostdev> devices is
supported, persistent hotplug is not. This patch adds the proper
VIR_DOMAIN_DEVICE_HOSTDEV cases to the switches in
qemuDomainAttachDeviceConfig and qemuDomainDetachDeviceConfig.
There are several functions that call virNetlinkCommand, and they all
follow a common pattern, with three exit labels: err_exit (or
cleanup), malformed_resp, and buffer_too_small. All three of these
labels do their own cleanup and have their own return. However, the
malformed_resp label usually frees the same items as the
cleanup/err_exit label, and the buffer_too_small label just doesn't
free recvbuf (because it's known to always be NULL at the time we goto
buffer_too_small.
In order to simplify and standardize the code, I've made the following
changes to all of these functions:
1) err_exit is replaced with the more libvirt-ish "cleanup", which
makes sense because in all cases this code is also executed in the
case of success, so labelling it err_exit may be confusing.
2) rc is initialized to -1, and set to 0 just before the cleanup
label. Any code that currently sets rc = -1 is made to instead goto
cleanup.
3) malformed_resp and buffer_too_small just log their error and goto
cleanup. This gives us a single return path, and a single place to
free up resources.
4) In one instance, rather then logging an error immediately, a char*
msg was pointed to an error string, then goto cleanup (and cleanup
would log an error if msg != NULL). It takes no more lines of code
to just log the message as we encounter it.
This patch should have 0 functional effects.
There are several functions in domain_conf.c that remove a device
object from the domain's list of that object type, but don't free the
object or return it to the caller to free. In many cases this isn't a
problem because the caller already had a pointer to the object and
frees it afterward, but in several cases the removed object was just
left floating around with no references to it.
In particular, the function qemuDomainDetachDeviceConfig() calls
functions to locate and remove net (virDomainNetRemoveByMac), disk
(virDomainDiskRemoveByName()), and lease (virDomainLeaseRemove())
devices, but neither it nor its caller qemuDomainModifyDeviceConfig()
ever obtain a pointer to the device being removed, much less free it.
This patch modifies the following "remove" functions to return a
pointer to the device object being removed from the domain device
arrays, to give the caller the option of freeing the device object
using that pointer if needed. In places where the object was
previously leaked, it is now freed:
virDomainDiskRemove
virDomainDiskRemoveByName
virDomainNetRemove
virDomainNetRemoveByMac
virDomainHostdevRemove
virDomainLeaseRemove
virDomainLeaseRemoveAt
The functions that had been leaking:
libxlDomainDetachConfig - leaked a virDomainDiskDef
qemuDomainDetachDeviceConfig - could leak a virDomainDiskDef,
a virDomainNetDef, or a
virDomainLeaseDef
qemuDomainDetachLease - leaked a virDomainLeaseDef
There were certain paths through the hostdev detach code that could
lead to the lower level function failing (and not removing the object
from the domain's hostdevs list), but the higher level function
free'ing the hostdev object anyway. This would leave a stale
hostdevdef pointer in the list, which would surely cause a problem
eventually.
This patch relocates virDomainHostdevRemove from the lower level
functions qemuDomainDetachThisHostDevice and
qemuDomainDetachHostPciDevice, to their caller
qemuDomainDetachThisHostDevice, placing it just before the call to
virDomainHostdevDefFree. This makes it easy to verify that either both
operations are done, or neither.
NB: The "dangling pointer" part of this problem was introduced in
commit 13d5a6, so it is not present in libvirt versions prior to
0.9.9. Earlier versions would return failure in certain cases even
though the the device object was removed/deleted, but the removal and
deletion operations would always both happen or neither.
There are special stub versions of all public functions in this file
that are compiled when either libnl isn't available or the platform
isn't linux. Each of these functions had two almost identical message,
differing only in the function name included in the message. Since log
messages already contain the function name, we can just define a const
char* with the common part of the string, and use that same string for
all the log messages.
Also, rather than doing #if defined ... #else ... #endif *inside the
error log macro invocation*, this patch does #if defined ... just
once, using it to decide which single string to define. This turns the
error log in each function from 6 lines, to 1 line.
This patch will allow OpenFlow controllers to identify which interface
belongs to a particular VM by using the Domain UUID.
ovs-vsctl get Interface vnet0 external_ids
{attached-mac="52:54:00:8C:55:2C", iface-id="83ce45d6-3639-096e-ab3c-21f66a05f7fa", iface-status=active, vm-id="142a90a7-0acc-ab92-511c-586f12da8851"}
V2 changes:
Replaced vm-uuid with vm-id. There was a discussion in Open vSwitch
mailinglist that we should stick with the same DB key postfixes for the
sake of consistency (e.g iface-id, vm-id ...).
The indentation on the final lines of the function was off by four
spaces, making me wonder for a second if there was something
missing. (There wasn't.)
Commit 5d4b0c4c80 tried to fix certain classes of VPATH builds,
but was too limited. In particular, Guannan Ren reported:
> For example: The libvirt source code resides in /home/testuser,
> I make dist in /tmp/buildvpath, the XDR routine .c file will
> include full path of the header file like:
>
> #include "/home/testuser/src/rpc/virnetprotocol.h"
> #include "internal.h"
> #include <arpa/inet.h>
>
> If we distribute the tarball to another machine to compile,
> it will report error as follows:
>
> rpc/virnetprotocol.c:7:59: fatal error:
> /home/testuser/src/rpc/virnetprotocol.h: No such file or directory
* src/rpc/genprotocol.pl: Fix more include lines.
If we need to virFork() to check assess() under different
UID+GID we need to translate returned status via WEXITSTATUS().
Otherwise, we may return values greater than 255 which is
obviously wrong.
The function sanlock_inquire can return NULL in the state string if the
message consists only of a header. The return value is arbitrary and
sent by the server. We should proceed carefully while touching such
pointers.
Some members are generated during XML parse (e.g. MAC address of
an interface); However, with current implementation, if we
are plugging a device both to persistent and live config,
we parse given XML twice: first time for live, second for config.
This is wrong then as the second time we are not guaranteed
to generate same values as we did for the first time.
To prevent that we need to create a copy of DeviceDefPtr;
This is done through format/parse process instead of writing
functions for deep copy as it is easier to maintain:
adding new field to any virDomain*DefPtr doesn't require change
of copying function.
Currently, startupPolicy='requisite' was determining cold boot
by migrateFrom != NULL. That means, if domain was started up
with migrateFrom set we didn't require disk source path and allowed
it to be dropped. However, on snapshot-revert domain wasn't migrated
but according to documentation, requisite should drop disk source
as well.
Output is still in kibibytes, but input can now be in different
scales for ease of typing.
* src/conf/domain_conf.c (virDomainParseMemory): New helper.
(virDomainDefParseXML): Use it when parsing.
* docs/schemas/domaincommon.rng: Expand XML; rename memoryKBElement
to memoryElement and update callers.
* docs/formatdomain.html.in (elementsMemoryAllocation): Document
scaling.
* tests/qemuxml2argvdata/qemuxml2argv-memtune.xml: Adjust test.
* tests/qemuxml2xmltest.c: Likewise.
* tests/qemuxml2xmloutdata/qemuxml2xmlout-memtune.xml: New file.
Using 'unsigned long' for memory values is risky on 32-bit platforms,
as a PAE guest can have more than 4GiB memory. Our API is
(unfortunately) locked at 'unsigned long' and a scale of 1024, but
the rest of our system should consistently use 64-bit values,
especially since the previous patch centralized overflow checking.
* src/conf/domain_conf.h (_virDomainDef): Always use 64-bit values
for memory. Change hugepage_backed to a bool.
* src/conf/domain_conf.c (virDomainDefParseXML)
(virDomainDefCheckABIStability, virDomainDefFormatInternal): Fix
clients.
* src/vmx/vmx.c (virVMXFormatConfig): Likewise.
* src/xenxs/xen_sxpr.c (xenParseSxpr, xenFormatSxpr): Likewise.
* src/xenxs/xen_xm.c (xenXMConfigGetULongLong): New function.
(xenXMConfigGetULong, xenXMConfigSetInt): Avoid truncation.
(xenParseXM, xenFormatXM): Fix clients.
* src/phyp/phyp_driver.c (phypBuildLpar): Likewise.
* src/openvz/openvz_driver.c (openvzDomainSetMemoryInternal):
Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainDefineXML): Likewise.
* src/qemu/qemu_command.c (qemuBuildCommandLine): Likewise.
* src/qemu/qemu_process.c (qemuProcessStart): Likewise.
* src/qemu/qemu_monitor.h (qemuMonitorGetBalloonInfo): Likewise.
* src/qemu/qemu_monitor_text.h (qemuMonitorTextGetBalloonInfo):
Likewise.
* src/qemu/qemu_monitor_text.c (qemuMonitorTextGetBalloonInfo):
Likewise.
* src/qemu/qemu_monitor_json.h (qemuMonitorJSONGetBalloonInfo):
Likewise.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONGetBalloonInfo):
Likewise.
* src/qemu/qemu_driver.c (qemudDomainGetInfo)
(qemuDomainGetXMLDesc): Likewise.
* src/uml/uml_conf.c (umlBuildCommandLine): Likewise.
On 64-bit platforms, unsigned long and unsigned long long are
identical, so we don't have to worry about overflow checks.
On 32-bit platforms, anywhere we narrow unsigned long long back
to unsigned long, we have to worry about overflow; it's easier
to do this in one place by having most of the code use the same
or wider types, and only doing the narrowing at the last minute.
Therefore, the memory set commands remain unsigned long, and
the memory get command now centralizes the overflow check into
libvirt.c, so that drivers don't have to repeat the work.
This also fixes a bug where xen returned the wrong value on
failure (most APIs return -1 on failure, but getMaxMemory
must return 0 on failure).
* src/driver.h (virDrvDomainGetMaxMemory): Use long long.
* src/libvirt.c (virDomainGetMaxMemory): Raise overflow.
* src/test/test_driver.c (testGetMaxMemory): Fix driver.
* src/rpc/gendispatch.pl (name_to_ProcName): Likewise.
* src/xen/xen_hypervisor.c (xenHypervisorGetMaxMemory): Likewise.
* src/xen/xen_driver.c (xenUnifiedDomainGetMaxMemory): Likewise.
* src/xen/xend_internal.c (xenDaemonDomainGetMaxMemory):
Likewise.
* src/xen/xend_internal.h (xenDaemonDomainGetMaxMemory):
Likewise.
* src/xen/xm_internal.c (xenXMDomainGetMaxMemory): Likewise.
* src/xen/xm_internal.h (xenXMDomainGetMaxMemory): Likewise.
* src/xen/xs_internal.c (xenStoreDomainGetMaxMemory): Likewise.
* src/xen/xs_internal.h (xenStoreDomainGetMaxMemory): Likewise.
* src/xenapi/xenapi_driver.c (xenapiDomainGetMaxMemory):
Likewise.
* src/esx/esx_driver.c (esxDomainGetMaxMemory): Likewise.
* src/libxl/libxl_driver.c (libxlDomainGetMaxMemory): Likewise.
* src/qemu/qemu_driver.c (qemudDomainGetMaxMemory): Likewise.
* src/lxc/lxc_driver.c (lxcDomainGetMaxMemory): Likewise.
* src/uml/uml_driver.c (umlDomainGetMaxMemory): Likewise.
The test domain allows <memory>0</memory>, but the RNG was stating
that memory had to be at least 4096000 bytes. Hypervisors should
enforce their own limits, rather than complicating the RNG.
Meanwhile, some copy and paste had introduced some fishy constructs
in various unit tests.
* docs/schemas/domaincommon.rng (memoryKB, memoryKBElement): Drop
limit that isn't enforced in code.
* src/conf/domain_conf.c (virDomainDefParseXML): Require current
<= maximum.
* tests/qemuxml2argvdata/*.xml: Fix offenders.
Disk manufacturers are fond of quoting sizes in powers of 10,
rather than powers of 2 (after all, 2.1 GB sounds larger than
2.0 GiB, even though the exact opposite is true). So, we might
as well follow coreutils' lead in supporting three types of
suffix: single letter ${u} (which we already had) and ${u}iB
for the power of 2, and ${u}B for power of 10.
Additionally, it is impossible to create a file with more than
2**63 bytes, since off_t is signed (if you have enough storage
to even create one 8EiB file, I'm jealous). This now reports
failure up front rather than down the road when the kernel
finally refuses an impossible size.
* docs/schemas/basictypes.rng (unit): Add suffixes.
* src/conf/storage_conf.c (virStorageSize): Use new function.
* docs/formatstorage.html.in: Document it.
* tests/storagevolxml2xmlin/vol-file-backing.xml: Test it.
* tests/storagevolxml2xmlin/vol-file.xml: Likewise.
Make it obvious to 'dumpxml' readers what unit we are using,
since our default of KiB for memory (1024) differs from qemu's
default of MiB; and differs from our use of bytes for storage.
Tests were updated via:
$ find tests/*data tests/*out -name '*.xml' | \
xargs sed -i 's/<\(memory\|currentMemory\|hard_limit\|soft_limit\|min_guarantee\|swap_hard_limit\)>/<\1 unit='"'KiB'>/"
$ find tests/*data tests/*out -name '*.xml' | \
xargs sed -i 's/<\(capacity\|allocation\|available\)>/<\1 unit='"'bytes'>/"
followed by a few fixes for the stragglers.
Note that with this patch, the RNG for <memory> still forbids
validation of anything except unit='KiB', since the code silently
ignores the attribute; a later patch will expand <memory> to allow
scaled input in the code and update the RNG to match.
* docs/schemas/basictypes.rng (unit): Add 'bytes'.
(scaledInteger): New define.
* docs/schemas/storagevol.rng (sizing): Use it.
* docs/schemas/storagepool.rng (sizing): Likewise.
* docs/schemas/domaincommon.rng (memoryKBElement): New define; use
for memory elements.
* src/conf/storage_conf.c (virStoragePoolDefFormat)
(virStorageVolDefFormat): Likewise.
* src/conf/domain_conf.h (_virDomainDef): Document unit used
internally.
* src/conf/storage_conf.h (_virStoragePoolDef, _virStorageVolDef):
Likewise.
* tests/*data/*.xml: Update all tests.
* tests/*out/*.xml: Likewise.
* tests/define-dev-segfault: Likewise.
* tests/openvzutilstest.c (testReadNetworkConf): Likewise.
* tests/qemuargv2xmltest.c (blankProblemElements): Likewise.
Scaling an integer based on a suffix is something we plan on reusing
in several contexts: XML parsing, virsh CLI parsing, and possibly
elsewhere. Make it easy to reuse, as well as adding in support for
powers of 1000.
* src/util/util.h (virScaleInteger): New function.
* src/util/util.c (virScaleInteger): Implement it.
* src/libvirt_private.syms (util.h): Export it.
Overflow can be user-induced, so it deserves more than being called
an internal error. Note that in general, 32-bit platforms have
far more places to trigger this error (anywhere the public API
used 'unsigned long' but the other side of the connection is a
64-bit server); but some are possible on 64-bit platforms (where
the public API computes the product of two numbers).
* include/libvirt/virterror.h (VIR_ERR_OVERFLOW): New error.
* src/util/virterror.c (virErrorMsg): Translate it.
* src/libvirt.c (virDomainSetVcpusFlags, virDomainGetVcpuPinInfo)
(virDomainGetVcpus, virDomainGetCPUStats): Use it.
* daemon/remote.c (HYPER_TO_TYPE): Likewise.
* src/qemu/qemu_driver.c (qemuDomainBlockResize): Likewise.
Yes, I like kilobytes better than kibibytes (when I say kilobytes,
I generally mean 1024). But since the term is ambiguous, it can't
hurt to say what we mean, by using both the correct name and
calling out the numeric equivalent.
* src/libvirt.c (virDomainGetMaxMemory, virDomainSetMaxMemory)
(virDomainSetMemory, virDomainSetMemoryFlags)
(virNodeGetFreeMemory): Tweak wording.
* docs/formatdomain.html.in: Likewise.
* docs/formatstorage.html.in: Likewise.
ATTRIBUTE_UNUSED was accidentally forgotten on one arg of a stub
function for functionality that's not present on non-linux
platforms. This causes a non-linux build with
--enable-compile-warnings=error to fail.
The RPC code assumed that the array returned by the driver would be
fully populated; that is, ncpus on entry resulted in ncpus * return
value on exit. However, while we don't support holes in the middle
of ncpus, we do want to permit the case of ncpus on entry being
longer than the array returned by the driver (that is, it should be
safe for the caller to pass ncpus=128 on entry, and the driver will
stop populating the array when it hits max_id).
Additionally, a successful return implies that the caller will then
use virTypedParamArrayClear on the entire array; for this to not
free uninitialized memory, the driver must ensure that all skipped
entries are explicitly zeroed (the RPC driver did this, but not
the qemu driver).
There are now three cases:
server 0.9.10 and client 0.9.10 or newer: No impact - there were no
hypervisor drivers that supported cpu stats
server 0.9.11 or newer and client 0.9.10: if the client calls with
ncpus beyond the max, then the rpc call will fail on the client side
and disconnect the client, but the server is no worse for the wear
server 0.9.11 or newer and client 0.9.11: the server can return a
truncated array and the client will do just fine
I reproduced the problem by using a host with 2 CPUs, and doing:
virsh cpu-stats $dom --start 1 --count 2
* daemon/remote.c (remoteDispatchDomainGetCPUStats): Allow driver
to omit tail of array.
* src/remote/remote_driver.c (remoteDomainGetCPUStats):
Accommodate driver that omits tail of array.
* src/libvirt.c (virDomainGetCPUStats): Document this.
* src/qemu/qemu_driver.c (qemuDomainGetPercpuStats): Clear all
unpopulated entries.
* For now, only "cpu_time" is supported.
* cpuacct cgroup is used for providing percpu cputime information.
* src/qemu/qemu.conf - take care of cpuacct cgroup.
* src/qemu/qemu_conf.c - take care of cpuacct cgroup.
* src/qemu/qemu_driver.c - added an interface
* src/util/cgroup.c/h - added interface for getting percpu cputime
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
These changes are applied only if the hostdev has a parent net device
(i.e. if it was defined as "<interface type='hostdev'>" rather than
just "<hostdev>"). If the parent netdevice has virtual port
information, the original virtualport associate functions are called
(these set and restore both mac and port profile on an
interface). Otherwise, only mac address is set on the device.
Note that This is only supported for SR-IOV Virtual Functions (not for
standard PCI or USB netdevs), and virtualport association is only
supported for 802.1Qbh. For all other types of cards and types of
virtualport, a "Config Unsupported" error is returned and the
operation fails.
Signed-off-by: Roopa Prabhu <roprabhu@cisco.com>
This patch includes the following changes to virnetdevmacvlan.c and
virnetdevvportprofile.c:
- removes some netlink functions which are now available in
virnetdev.c
- Adds a vf argument to all port profile functions.
For 802.1Qbh devices, the port profile calls can use a vf argument if
passed by the caller. If the vf argument is -1 it will try to derive the vf
if the device passed is a virtual function.
For 802.1Qbg devices, This patch introduces a null check for the device
argument because during port profile assignment on a hostdev, this argument
can be null.
Signed-off-by: Roopa Prabhu <roprabhu@cisco.com>
This patch adds the following:
- functions to set and get vf configs
- Functions to replace and store vf configs (Only mac address is handled today.
But the functions can be easily extended for vlans and other vf configs)
- function to dump link dev info (This is moved from virnetdevvportprofile.c)
Signed-off-by: Roopa Prabhu <roprabhu@cisco.com>
pciDeviceGetVirtualFunctionInfo returns pf netdevice name and virtual
function index for a given vf. This is just a wrapper around existing functions
to return vf's pf and vf_index with one api call
pciConfigAddressToSysfsfile returns the sysfile pci device link
from a 'struct pci_config_address'
Signed-off-by: Roopa Prabhu <roprabhu@cisco.com>
qemuDomainAttachNetDevice
- re-ordered some things at start of function because
networkAllocateActualDevice should always be run and a slot
in def->nets always allocated, but host_net_add isn't needed
if the actual type is hostdev.
- if actual type is hostdev, defer to
qemuDomainAttachHostDevice (which will reach up to the NetDef
for things like MAC address when necessary). After return
from qemuDomainAttachHostDevice, slip directly to cleanup,
since the rest of the function is specific to emulated net
devices.
- put assignment of new NetDef into expanded def->nets down
below cleanup: (but only on success) since it is also needed
for emulated and hostdev net devices.
qemuDomainDetachHostDevice
- after locating the exact device to detach, check if it's a
network device and, if so, use toplevel
qemuDomainDetachNetDevice instead so that the def->nets list
is properly updated, and 'actual device' properly returned to
network pool if appropriate. Otherwise, for normal hostdevs,
call the lower level qemuDomainDetachThisDevice.
qemuDomainDetachNetDevice
- This is where it gets a bit tricky. After locating the device
on the def->nets list, if the network device type == hostdev,
call the *lower level* qemuDomainDetachThisDevice (which will
reach back up to the parent net device for MAC address /
virtualport when appropriate, then clear the device out of
def->hostdevs) before skipping past all the emulated
net-device-specific code to cleanup:, where the network
device is removed from def->nets, and the network device
object is freed.
In short, any time a hostdev-type network device is detached, we must
go through the toplevel virDomaineDetachNetDevice function first and
last, to make sure 1) the def->nnets list is properly managed, and 2)
any device allocated with networkAllocateActualDevice is properly
freed. At the same time, in the middle we need to go through the
lower-level vidDomainDetach*This*HostDevice to be sure that 1) the
def->hostdevs list is properly managed, 2) the PCI device is properly
detached from the guest and reattached to the host (if appropriate),
and 3) any higher level teardown is called at the appropriate time, by
reaching back up to the NetDef config (part (3) will be covered in a
separate patch).
This patch makes sure that each network device ("interface") of
type='hostdev' appears on both the hostdevs list and the nets list of
the virDomainDef, and it modifies the qemu driver startup code so that
these devices will be presented to qemu on the commandline as hostdevs
rather than as network devices.
It does not add support for hotplug of these type of devices, or code
to honor the <mac address> or <virtualport> given in the config (both
of those will be done in separate patches).
Once each device is placed on both lists, much of what this patch does
is modify places in the code that traverse all the device lists so
that these hybrid devices are only acted on once - either along with
the other hostdevs, or along with the other network interfaces. (In
many cases, only one of the lists is traversed / a specific operation
is performed on only one type of device. In those instances, the code
can remain unchanged.)
There is one special case - when building the commandline, interfaces
are allowed to proceed all the way through
networkAllocateActualDevice() before deciding to skip the rest of
netdev-specific processing - this is so that (once we have support for
networks with pools of hostdev devices) we can get the actual device
allocated, then rely on the loop processing all hostdevs to generate
the correct commandline.
(NB: <interface type='hostdev'> is only supported for PCI network
devices that are SR-IOV Virtual Functions (VF). Standard PCI[e] and
USB devices, and even the Physical Functions (PF) of SR-IOV devices
can only be assigned to a guest using the more basic <hostdev> device
entry. This limitation is mostly due to the fact that non-SR-IOV
ethernet devices tend to lose mac address configuration whenever the
card is reset, which happens when a card is assigned to a guest;
SR-IOV VFs fortunately don't suffer the same problem.)
This is the new interface type that sets up an SR-IOV PCI network
device to be assigned to the guest with PCI passthrough after
initializing some network device-specific things from the config
(e.g. MAC address, virtualport profile parameters). Here is an example
of the syntax:
<interface type='hostdev' managed='yes'>
<source>
<address type='pci' domain='0' bus='0' slot='4' function='3'/>
</source>
<mac address='00:11:22:33:44:55'/>
<address type='pci' domain='0' bus='0' slot='7' function='0'/>
</interface>
This would assign the PCI card from bus 0 slot 4 function 3 on the
host, to bus 0 slot 7 function 0 on the guest, but would first set the
MAC address of the card to 00:11:22:33:44:55.
NB: The parser and formatter don't care if the PCI card being
specified is a standard single function network adapter, or a virtual
function (VF) of an SR-IOV capable network adapter, but the upcoming
code that implements the back end of this config will work *only* with
SR-IOV VFs. This is because modifying the mac address of a standard
network adapter prior to assigning it to a guest is pointless - part
of the device reset that occurs during that process will reset the MAC
address to the value programmed into the card's firmware.
Although it's not supported by any of libvirt's hypervisor drivers,
usb network hostdevs are also supported in the parser and formatter
for completeness and consistency. <source> syntax is identical to that
for plain <hostdev> devices, except that the <address> element should
have "type='usb'" added if bus/device are specified:
<interface type='hostdev'>
<source>
<address type='usb' bus='0' device='4'/>
</source>
<mac address='00:11:22:33:44:55'/>
</interface>
If the vendor/product form of usb specification is used, type='usb'
is implied:
<interface type='hostdev'>
<source>
<vendor id='0x0012'/>
<product id='0x24dd'/>
</source>
<mac address='00:11:22:33:44:55'/>
</interface>
Again, the upcoming patch to fill in the backend of this functionality
will log an error and fail with "Unsupported Config" if you actually
try to assign a USB network adapter to a guest using <interface
type='hostdev'> - just use a standard <hostdev> entry in that case
(and also for single-port PCI adapters).
This refactoring is necessary to support hotplug detach of
type=hostdev network devices, but needs to be in a separate patch to
make potential debugging of regressions more practical.
Rather than the lowest level functions searching for a matching
device, the search is now done in the toplevel function, and an
intermediate-level function (qemuDomainDetachThisHostDevice()), which
expects that the device's entry is already found, is called (this
intermediate function will be called by qemuDomainDetachNetDevice() in
order to support detach of type=hostdev net devices)
This patch should result in 0 differences in functionality.
Three new functions useful in other files:
virDomainHostdevInsert:
Add a new hostdev at the end of the array. This would more sensibly be
called virDomainHostdevAppend, but the existing functions for other
types of devices are called Insert.
virDomainHostdevRemove:
Eliminates one entry from the hostdevs array, but doesn't free it;
patterned after the code at the end of the two
qemuDomainDetachHostXXXDevice functions (and also other pre-existing
virDomainXXXRemove functions for other device types).
virDomainHostdevFind:
This function is patterned from the search loops at the top of
qemuDomainDetachHostPciDevice and qemuDomainDetachHostUsbDevice, and
will be used to re-factor those (and other detach-related) functions.
To shorten some new code that accesses the many fields within the
subsys struct of a hostdev, create a separate toplevel, typedefed
virDomainHostdevSubsys struct so that we can define temporary pointers
to the subsys part.
The parent can be any type of device. It defaults to type=none, and a
NULL pointer. The intent is that if a hostdevdef is contained in the
def for a higher level device (e.g. virDomainNetDef), hostdev->parent
will point to the higher level device, and type will be set to that
type of device. This way, during attach and detach of the device,
parent can be checked, and appropriate callouts made to do higher
level device initialization (e.g. setting MAC address).
Also, although these hostdevs with parents will be added to a domain's
hostdevs list, they will be treated slightly differently when
traversing the list, e.g. virDomainHostdefDefFree for a hostdev that
has a parent doesn't need to be called (and will be a NOP); it will
simply be removed from the list (since the parent device object is in
its own type-specific list, and will be freed from there).
In an upcoming patch, virDomainNetDef will acquire a
virDomainHostdevDef, and the <interface> XML will take on some of the
elements of a <hostdev>. To avoid duplicating the code for parsing and
formatting the <source> element (which will be nearly identical in
these two cases), this patch factors those parts out of the
HostdevDef's parse and format functions, and puts them into separate
helper functions that are now called by the HostdevDef
parser/formatter, and will soon be called by the NetDef
parser/formatter.
One change in behavior - previously virDomainHostdevDefParseXML() had
diverged from current common coding practice by logging an error and
failing if it found any subelements of <hostdev> other than those it
understood (standard libvirt practice is to ignore/discard unknown
elements and attributes during parse). The new helper function ignores
unknown elements, and thus so does the new
virDomainHostdevDefParseXML.
In order to allow for a virDomainHostdevDef that uses the
virDomainDeviceInfo of a "higher level" device (such as a
virDomainNetDef), this patch changes the virDomainDeviceInfo in the
HostdevDef into a virDomainDeviceInfoPtr. Rather than adding checks
all over the code to check for a null info, we just guarantee that it
is always valid. The new function virDomainHostdevDefAlloc() allocates
a virDomainDeviceInfo and plugs it in, and virDomainHostdevDefFree()
makes sure it is freed.
There were 4 places allocating virDomainHostdevDefs, all of them
parsers of one sort or another, and those have all had their
VIR_ALLOC(hostdev) changed to virDomainHostdevDefAlloc(). Other than
that, and the new functions, all the rest of the changes are just
mechanical removals of "&" or changing "." to "->".
There will be cases where the iterator callback will need to know the
type of the device whose info is being operated on, and possibly even
need to use some of the device's config. This patch adds a
virDomainDeviceDefPtr to the args of every callback, and fills it in
appropriately as the devices are iterated through.
The virDomainDeviceInfoPtrs in qemuCollectPCIAddress and
qemuComparePCIDevice are named "dev" and "dev1", but those functions
will be changed (in order to match a change in the args sent to
virDomainDeviceInfoIterate() callback args) to contain a
virDomainDeviceDefPtr device.
This patch renames "dev" to "info" (and "dev[n]" to "info[n]") to
avoid later confusion.
This patch is only code movement + adding some forward definitions of
typedefs.
virDomainHostdevDef (not just a pointer to it, but an actual object)
will be needed in virDomainNetDef and virDomainActualNetDef, so it
must be relocated earlier in the file.
Likewise, virDomainDeviceDef will be needed in virDomainHostdevDef, so
it must be moved up even earlier. This, in turn, creates a forward
reference problem, but fortunately only with pointers to other device
types, so their typedefs can be moved up in the file, eliminating the
problem.
Not all device types were represented in virDomainDeviceType, so some
types of devices couldn't be represented in a virDomainDeviceDef
(which requires a different type of pointer in the union for each
different kind of device).
Since serial, parallel, channel, and console devices are all
virDomainChrDef, and the virDomainDeviceType is never used to produce
a string from the type (and only used in the other direction
internally to code, never to produce XML), I only added one "CHR"
type, which is associated with "virDomainChrDefPtr chr" in the union.
Commit 723d5c (added after the release of 0.9.10) adds a
NetlinkEventClient for each interface sent to
virNetDevMacVLanCreateWithVPortProfile. This should only be done if
the interface actually *has* a virtPortProfile, otherwise the event
handler would be a NOP. The bigger problem is that part of the setup
to create the NetlinkEventClient is to do a memcpy of virtPortProfile
- if it's NULL, this triggers a segv.
This patch just qualifies the code that adds the client - if
virtPortProfile is NULL, it's skipped.
Qemu supports sizing by bytes; we shouldn't force the user to
round up if they really wanted an unaligned total size.
* include/libvirt/libvirt.h.in (VIR_DOMAIN_BLOCK_RESIZE_BYTES):
New flag.
* src/libvirt.c (virDomainBlockResize): Document it.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONBlockResize): Take
size in bytes.
* src/qemu/qemu_monitor_text.c (qemuMonitorTextBlockResize):
Likewise. Pass bytes, not megabytes, to monitor.
* src/qemu/qemu_driver.c (qemuDomainBlockResize): Implement new
flag.
No matter what cache mode is used, readonly disks are always safe wrt
migration. Shared disks are required to be readonly or to disable
host-side cache, which makes them safe as well.
A multi-threaded client with event loop may crash if one of its threads
closes a connection while event loop is in the middle of sending
keep-alive message (either request or response). The right place for it
is inside virNetClientIOEventLoop() between poll() and
virNetClientLock(). We should only close a connection directly if no-one
is using it and defer the closing to the last user otherwise. So far we
only did so if the close was initiated by keep-alive timeout.
Building virt-aa-helper with dtrace probes enabled, ldd complained about
undefined references:
./.libs/libvirt_util.a(libvirt_util_la-event_poll.o):(.note.stapsdt+0x24):
undefined reference to `libvirt_event_poll_purge_timeout_semaphore'
...
Lets say I got a volume with '1G' allocation and '10G' capacity. The
available space in the parent pool is '5G'. With the current check for
overcapacity, I can only try to resize to <= '6G'. You see the problem?
With an additional new bool added to determine whether or not to
discourage the use of the supplied MAC address by the bridge itself,
virNetDevTapCreateInBridgePort had three booleans (well, 2 bools and
an int used as a bool) in the arg list, which made it increasingly
difficult to follow what was going on. This patch combines those three
into a single flags arg, which not only shortens the arg list, but
makes it more self-documenting.
When a tap device for a domain is created and attached to a bridge,
the first byte of the tap device MAC address is set to 0xFE, while the
rest is set to match the MAC address that will be presented to the
guest as its network device MAC address. Setting this high value in
the tap's MAC address discourages the bridge from using the tap
device's MAC address as the bridge's own MAC address (Linux bridges
always take on the lowest numbered MAC address of all attached devices
as their own).
In one case within libvirt, a tap device is created and attached to
the bridge with the intent that its MAC address be taken on by the
bridge as its own (this is used to assure that the bridge has a fixed
MAC address to prevent network outages created by the bridge MAC
address "flapping" as guests are started and stopped). In this case,
the first byte of the mac address is *not* altered to 0xFE.
In the current code, callers to virNetDevTapCreateInBridgePort each
make the MAC address modification themselves before calling, which
leads to code duplication, and also prevents lower level functions
from knowing the real MAC address being used by the guest. The problem
here is that openvswitch bridges must be informed about this MAC
address, or they will be unable to pass traffic to/from the guest.
This patch centralizes the location of the MAC address "0xFE fixup"
into virNetDevTapCreateInBridgePort(), meaning 1) callers of this
function no longer need the extra strange bit of code, and 2)
bitNetDevTapCreateBridgeInPort itself now is called with the guest's
unaltered MAC address, and can pass it on, unmodified, to
virNetDevOpenvswitchAddPort.
There is no other behavioral change created by this patch.
Nuke the last vestiges of printing pid_t values with the wrong
types, at least in code compiled on mingw64. There may be other
places, but for now they are only compiled on systems where the
existing %d doesn't trigger gcc warnings.
* src/rpc/virnetsocket.c (virNetSocketNew): Use %lld and casting,
rather than assuming any particular int type for pid_t.
* src/util/command.c (virCommandRunAsync, virPidWait)
(virPidAbort): Likewise.
(verify): Drop a now stale assertion.
No thanks to 64-bit windows, with 64-bit pid_t, we have to avoid
constructs like 'int pid'. Our API in libvirt-qemu cannot be
changed without breaking ABI; but then again, libvirt-qemu can
only be used on systems that support UNIX sockets, which rules
out Windows (even if qemu could be compiled there) - so for all
points on the call chain that interact with this API decision,
we require a different variable name to make it clear that we
audited the use for safety.
Adding a syntax-check rule only solves half the battle; anywhere
that uses printf on a pid_t still needs to be converted, but that
will be a separate patch.
* cfg.mk (sc_correct_id_types): New syntax check.
* src/libvirt-qemu.c (virDomainQemuAttach): Document why we didn't
use pid_t for pid, and validate for overflow.
* include/libvirt/libvirt-qemu.h (virDomainQemuAttach): Tweak name
for syntax check.
* src/vmware/vmware_conf.c (vmwareExtractPid): Likewise.
* src/driver.h (virDrvDomainQemuAttach): Likewise.
* tools/virsh.c (cmdQemuAttach): Likewise.
* src/remote/qemu_protocol.x (qemu_domain_attach_args): Likewise.
* src/qemu_protocol-structs (qemu_domain_attach_args): Likewise.
* src/util/cgroup.c (virCgroupPidCode, virCgroupKillInternal):
Likewise.
* src/qemu/qemu_command.c(qemuParseProcFileStrings): Likewise.
(qemuParseCommandLinePid): Use pid_t for pid.
* daemon/libvirtd.c (daemonForkIntoBackground): Likewise.
* src/conf/domain_conf.h (_virDomainObj): Likewise.
* src/probes.d (rpc_socket_new): Likewise.
* src/qemu/qemu_command.h (qemuParseCommandLinePid): Likewise.
* src/qemu/qemu_driver.c (qemudGetProcessInfo, qemuDomainAttach):
Likewise.
* src/qemu/qemu_process.c (qemuProcessAttach): Likewise.
* src/qemu/qemu_process.h (qemuProcessAttach): Likewise.
* src/uml/uml_driver.c (umlGetProcessInfo): Likewise.
* src/util/virnetdev.h (virNetDevSetNamespace): Likewise.
* src/util/virnetdev.c (virNetDevSetNamespace): Likewise.
* tests/testutils.c (virtTestCaptureProgramOutput): Likewise.
* src/conf/storage_conf.h (_virStoragePerms): Use mode_t, uid_t,
and gid_t rather than int.
* src/security/security_dac.c (virSecurityDACSetOwnership): Likewise.
* src/conf/storage_conf.c (virStorageDefParsePerms): Avoid
compiler warning.
Commit 7c90026 added #include "conf/domain_conf.h" to
util/virrandom.c. Fortunately it didn't actually use anything from
domain_conf.h, since as far as I'm aware, files in util aren't allowed
to reference anything in conf (although the opposite is allowed). So
this #include is unnecessary.
I verified it still compiles with the line removed, but have placed a
one day moratorium on me doing any "trivial rule" pushes, so will
wait for someone else to verify/ACK before pushing.
This actually wires up the new optional parameter to block_stream:
http://wiki.qemu.org/Features/LiveBlockMigration/ImageStreamingAPI
The error checking is still sparse, since libvirt must not use
qemu-img or header probing on a qcow2 file in use by qemu to
check if the backing file name is valid; so for now, libvirt is
relying on qemu to diagnose an incorrect backing name. Fixing this
will require libvirt to track the entire backing file chain at the
time qemu is started and keeps it updated with snapshot and pull
operations.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONBlockJob): Add
parameter, and update callers.
* src/qemu/qemu_monitor_json.h (qemuMonitorJSONBlockJob): Update
signature.
* src/qemu/qemu_monitor.h (qemuMonitorBlockJob): Likewise.
* src/qemu/qemu_driver.c (qemuDomainBlockJobImpl): Update caller.
* src/qemu/qemu_monitor.c (qemuMonitorBlockJob): Likewise.
Block job commands are not part of upstream qemu until 1.1; and
proper support of job completion and cancellation depends on being
able to receive QMP events, which implies the JSON monitor.
Additionally, some early versions of block job commands were
backported to RHEL qemu, but these versions lacked asynchronous
job cancellation and partial block pull, so there are several
patches that will still be needed in this area of libvirt code
to support both flavors of block job commands.
Due to earlier patches in libvirt, we are guaranteed that all versions
of qemu that support block job commands already require libvirt to
use the JSON monitor. That means that the text version of block jobs
will not be used, and having to refactor two copies of the block job
handlers makes no sense. So instead, we delete the text handlers.
* src/qemu/qemu_monitor.c (qemuMonitorBlockJob): Drop text monitor
support.
* src/qemu/qemu_monitor_text.h (qemuMonitorTextBlockJob): Delete.
* src/qemu/qemu_monitor_text.c (qemuMonitorTextParseBlockJobOne)
(qemuMonitorTextParseBlockJob, qemuMonitorTextBlockJob):
Likewise.
Add de-association handling for 802.1qbg (vepa) via lldpad
netlink messages. Also adds the possibility to perform an
association request without waiting for a confirmation.
Signed-off-by: D. Herrendoerfer <d.herrendoerfer@herrendoerfer.name>
This code adds a netlink event interface to libvirt.
It is based upon the event_poll code and makes use of
it. An event is generated for each netlink message sent
to the libvirt pid.
Signed-off-by: D. Herrendoerfer <d.herrendoerfer@herrendoerfer.name>
In qemu there are 2 cpu models (cpu64-rhel5 and cpu64-rhel6) not
supported by libvirt. This patch adds the support with the flags
specifications from /usr/share/qemu-kvm/cpu-model/cpu-x86_64.conf
The only difference is that AMD-specific features are removed so
the processor type is not vendor-specific. Those features are either
emulated or ignored by qemu if host CPU doesn't support them.
This call to virDomainDeviceDefParse is both unnecessary (since
it will again be called at the top of the immediately following if(),
and if not there, then at the top of the if following that), but it
also creates a leak of one virDomainDeviceDef and one [whatever type
of device the DeviceDef is pointing to; probably a virDomainDiskDef]
in the case that the function has been called with
VIR_DOMAIN_DEVICE_MODIFY_CONFIG (the second parse will overwrite the
devicedef that was just created).
For any disk controller model which is not "lsilogic", the command
line will be like:
-drive file=/dev/sda,if=none,id=drive-scsi0-0-3-0,format=raw \
-device scsi-disk,bus=scsi0.0,channel=0,scsi-id=3,lun=0,i\
drive=drive-scsi0-0-3-0,id=scsi0-0-3-0
The relationship between the libvirt address attrs and the qdev
properties are (controller model is not "lsilogic"; strings
inside <> represent libvirt adress attrs):
bus=scsi<controller>.0
channel=<bus>
scsi-id=<target>
lun=<unit>
* src/qemu/qemu_command.h: (New param "virDomainDefPtr def"
for function qemuBuildDriveDevStr; new param "virDomainDefPtr
vmdef" for function qemuAssignDeviceDiskAlias. Both for
virDomainDiskFindControllerModel's use).
* src/qemu/qemu_command.c:
- New param "virDomainDefPtr def" for qemuAssignDeviceDiskAliasCustom.
For virDomainDiskFindControllerModel's use, if the disk bus is "scsi"
and the controller model is not "lsilogic", "target" is one part of
the alias name.
- According change on qemuAssignDeviceDiskAlias and qemuBuildDriveDevStr
* src/qemu/qemu_hotplug.c:
- Changes to be consistent with declarations of qemuAssignDeviceDiskAlias
qemuBuildDriveDevStr, and qemuBuildControllerDevStr.
* tests/qemuxml2argvdata/qemuxml2argv-pseries-vio-user-assigned.args,
tests/qemuxml2argvdata/qemuxml2argv-pseries-vio.args: Update the
generated command line.
* src/conf/domain_conf.h: Add new member "target" to struct
_virDomainDeviceDriveAddress.
* src/conf/domain_conf.c: Parse and format "target"
* Lots of tests (.xml) in tests/domainsnapshotxml2xmlout,
tests/qemuxml2argvdata, tests/qemuxml2xmloutdata, and
tests/vmx2xmldata/ are modified for newly introduced
attribute "target" for address of "drive" type.
KVM will be able to use a PCI SCSI controller even on POWER. Let
the user specify the vSCSI controller by other means than a default.
After this patch, the QEMU driver will actually look at the model
and reject anything but auto, lsilogic and ibmvscsi.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Osier Yang <jyang@redhat.com>
In qemuDomainAttachNetDevice, the guest's tap interface has only been
attached to the bridge if iface_connected is true. It's possible for
an error to occur prior to that happening, and previously we would
attempt to remove the tap interface from the bridge even if it hadn't
been attached.
QMP commands don't need to be escaped since converting them to json
also escapes special characters. When a QMP command fails, however,
libvirt falls back to HMP commands. These fallback functions
(qemuMonitorText*) do their own escaping, and pass the result directly
to qemuMonitorHMPCommandWithFd. If the monitor is in json mode, these
pre-escaped commands will be escaped again when converted to json,
which can result in the wrong arguments being sent.
For example, a filename test\file would be sent in json as
test\\file.
This prevented attaching an image file with a " or \ in its name in
qemu 1.0.50, and also broke rbd attachment (which uses backslashes to
escape some internal arguments.)
Reported-by: Masuko Tomoya <tomoya.masuko@gmail.com>
Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
This patch fixes console corruption, that happens if two concurrent
sessions are opened for a single console on a domain. Result of this
corruption was that each of the console streams recieved just a part
of the data written to the pipe so every console rendered unusable.
New helper function for safe console handling is used to establish the
console stream connection. This function ensures that no other libvirt
client is using the console (with the ability to disconnect consoles of
libvirt clients) and that no UUCP style lockfile is placed on the PTY
device.
* src/qemu/qemu_domain.h
- add data structure to domain's private data dealing with
console connections
* src/qemu/qemu_domain.c:
- allocate/free domain's console data structure
* src/qemu/qemu_driver.c
- use the new helper function for console handling
This patch adds a set of functions used in creating console streams for
domains using PTYs and ensures mutually exclusive access to the PTYs.
If mutually exclusive access is not used, two clients may open the same
console, which results in corruption on both clients as both of them
race to read data from the PTY.
Two approaches are used to ensure this:
1) Internal data structure holding open PTYs.
This is used internally and enables the user to forcibly
terminate another console connection eg. when somebody leaves
the console open on another host.
2) UUCP style lock files:
This uses UUCP lock files according to the FHS
( http://www.pathname.com/fhs/pub/fhs-2.3.html#VARLOCKLOCKFILES )
to check if other programs (like minicom) are not using the pty
device of the console.
This feature is disabled by default and may be enabled using
configure parameter
--with-console-lock-files=/path/to/lock/file/directory
or --with-console-lock-files=auto (which tries to infer the
location from OS used (currently only linux).
On usual linux systems, normal users may not write to the
/var/lock directory containing the locks. This poses problems
while in session mode. If the current user has no access to the
lockfile directory, check for presence of the file is still
done, but no lock file is created. This does NOT result in an
error.
This patch adds another callback to a FDstream object. The original
callback is used by the daemon stream driver to handle events.
This callback is called if and only if the stream is about to be closed.
This might be used to handle cleanup steps after a fdstream exits. This
will be used later on in ensuring mutually exclusive access to consoles.
* src/fdstream.c:
- emit the callback, when stream is being closed
- add data structures needed to handle the callback
- add function to register callback
* src/fdstream.h:
- define function prototypes for the callback
This patch causes the fdstream driver to call the stream event callback
if virStreamAbort() is called on a stream using this driver.
A remote handler for a stream can only detect changes via stream events,
so this event callback is necessary in order to enable a daemon to abort
a stream in such a way that the client will see the change.
* src/fdstream.c:
- modify close function to call stream event callback
This patch adds a set of flags to be used with the virDomainOpenConsole
API call to specify if the user wishes to interrupt an existing console
session or just to try open a new one.
VIR_DOMAIN_CONSOLE_SAFE - specifies that the console connection should
be opened only if the hypervisor supports
mutually exclusive access to console devices
VIR_DOMAIN_CONSOLE_FORCE - specifies that the caller wishes to interrupt
existing session and force a creation of a
new one.
This patch changes behavior of virPidFileRead to enable passing NULL as
path to the binary the pid file should be checked against to skip this
check. This enables using this function for reading files that have same
semantics as pid files, but belong to unknown processes.
using 'system-wakeup' monitor command. It is supported only in JSON,
as we are enabling it if possible. Moreover, this command is available
in qemu-1.1+ which definitely has JSON.
Function xmlParseURI does not remove square brackets around IPv6
address when parsing. One of the solutions is making wrappers around
functions working with xmlURI*. This assures that uri->server will be
always properly assigned and it doesn't have to be changed when used
on some new place in the code.
For this purpose, functions virParseURI and virSaveURI were
added. These function are wrappers around xmlParseURI and xmlSaveUri
respectively.
Also there is one new syntax check function to prohibit these functions
anywhere else.
File changes:
- src/util/viruri.h -- declaration
- src/util/viruri.c -- definition
- src/libvirt_private.syms -- symbol export
- src/Makefile.am -- added source and header files
- cfg.mk -- added sc_prohibit_xmlURI
- all others -- ID name and include fixes
The /usr/include/python/pyconfig.h file pollutes the global
namespace with a huge number of HAVE_XXX and WITH_XXX
defines. These change what we detected in our own config.h
In particular if you try to build without DTrace, python's
headers turn it back on with predictable fail.
THe hack to workaround this is to rename WITH_DTRACE to
WITH_DTRACE_PROBES to avoid the namespace clash
It's possible to disable SPICE TLS in qemu.conf. When this happens,
libvirt ignores any SPICE TLS port or x509 directory that may have
been set when it builds the qemu command line to use. However, it's
not ignoring the secure channels that may have been set and adds
tls-channel arguments to qemu command line.
Current qemu versions don't report an error when this happens, and try to use
TLS for the specified channels.
Before this patch
<domain type='kvm'>
<name>auto-tls-port</name>
<memory>65536</memory>
<os>
<type arch='x86_64' machine='pc'>hvm</type>
</os>
<devices>
<graphics type='spice' port='5900' tlsPort='-1' autoport='yes' listen='0' ke
<listen type='address' address='0'/>
<channel name='main' mode='secure'/>
<channel name='inputs' mode='secure'/>
</graphics>
</devices>
</domain>
generates
-spice port=5900,addr=0,disable-ticketing,tls-channel=main,tls-channel=inputs
and starts QEMU.
After this patch, an error is reported if a TLS port is set in the XML
or if secure channels are specified but TLS is disabled in qemu.conf.
This is the behaviour the oVirt people (where I spotted this issue) said
they would expect.
This fixes bug #790436
This patch adds support for vmx files with empty networkName
values (which is the case for vmx generated by Workstation).
It also adds support for vmx containing NATed network interfaces.
Update test suite accordingly
[forwarding this here from RH bug #796732]
When creating a network (virsh net-create) with an erroneous XML
containing an empty <name> element, the error message is misleading:
error: Failed to create network from foo.xml
error: missing domain name information
It took me a bit of time to figure out that it was the *network* name
that was missing (I generate this xml and didn't look at it, first).
I realized that the same message is used for missing name when creating
a domain, network, or device node.
https://bugzilla.redhat.com/show_bug.cgi?id=795656 mentions
that a graceful destroy request can time out, meaning that the
error message is user-visible and should be more appropriate
than just internal error.
* src/qemu/qemu_driver.c (qemuDomainDestroyFlags): Swap error type.
Migrating domains with disks using cache != none is unsafe unless the
disk images are stored on coherent clustered filesystem. Thus we forbid
migrating such domains unless VIR_MIGRATE_UNSAFE flags is used.
This patch adds VIR_MIGRATE_UNSAFE flag for migration APIs and new
VIR_ERR_MIGRATION_UNSAFE error code. The error code should be returned
whenever migrating a domain is considered unsafe (e.g., it's configured
in a way that does not ensure data integrity once it is migrated).
VIR_MIGRATE_UNSAFE flag may be used to force migration even though it
would normally be considered unsafe and forbidden.
AC_CHECK_PROG checks for program in given path. However, if it doesn't
exists, [variable] is set to [value-if-not-found]. We don't want this
to be the empty string in case of 'modprobe' and 'scrub' as we want to
fallback to runtime detection.
Adding "Expect:" to the header list stops libcurl from sending a
Expect header at all.
Before, a dummy Expect header was added that might confuse HTTP
proxies and result in HTTP error code 417 being reported.
Previously we would have:
"os type 'hvm' & arch 'idontexist' combination is not supported"
Now we get
"No guest options available for arch 'idontexist'"
or if options available but guest OS type not applicable:
"No os type 'xen' available for arch 'x86_64'"
* src/util/virfile.h: the virFileWrapperFdFlags being defined as
a globa variable instead of a type ended up generating a duplicate
symbol error.
* AUTHORS: added Lincoln Myers
* src/qemu/qemu_process.c (qemuFindAgentConfig): avoid crash libvirtd due to
deref a NULL pointer.
* How to reproduce?
1. virsh edit the following xml into guest configuration:
<channel type='pty'>
<target type='virtio'/>
</channel>
2. virsh start <domain>
or
% virt-install -n foo -r 1024 --disk path=/var/lib/libvirt/images/foo.img,size=1 \
--channel pty,target_type=virtio -l <installation tree>
Signed-off-by: Alex Jia <ajia@redhat.com>
When migrating a qemu domain, we enter the monitor, send some commands,
try to connect to destination qemu, send other commands, end exit the
monitor. However, if we couldn't connect to destination qemu we forgot
to exit the monitor.
Bug introduced by commit d9d518b1c8.
In case libvirtd cannot detect host CPU model (which may happen if it
runs inside a virtual machine), the daemon is likely to segfault when
starting a new qemu domain. It segfaults when domain XML asks for host
(either model or passthrough) CPU or does not ask for any specific CPU
model at all.
Currently, if scrub (used for wiping algorithms) is not present
at compile time, we don't support any other wiping algorithms than
zeroing, even if it was installed later. Switch to runtime detection
instead.
Bug introduced in commit 35abced. On an inactive domain,
$ virsh snapshot-create-as dom snap
$ virsh snapshot-create dom
$ virsh snapshot-create dom
$ virsh snapshot-delete --children dom snap
could crash libvirtd, due to a use-after-free that results
when the callback freed the current element in the iteration.
* src/conf/domain_conf.c (virDomainSnapshotForEachChild)
(virDomainSnapshotActOnDescendant): Allow iteration to delete
current child.
This patch allows libvirt to add interfaces to already
existing Open vSwitch bridges. The following syntax in
domain XML file can be used:
<interface type='bridge'>
<mac address='52:54:00:d0:3f:f2'/>
<source bridge='ovsbr'/>
<virtualport type='openvswitch'>
<parameters interfaceid='921a80cd-e6de-5a2e-db9c-ab27f15a6e1d'/>
</virtualport>
<address type='pci' domain='0x0000' bus='0x00'
slot='0x03' function='0x0'/>
</interface>
or if libvirt should auto-generate the interfaceid use
following syntax:
<interface type='bridge'>
<mac address='52:54:00:d0:3f:f2'/>
<source bridge='ovsbr'/>
<virtualport type='openvswitch'>
</virtualport>
<address type='pci' domain='0x0000' bus='0x00'
slot='0x03' function='0x0'/>
</interface>
It is also possible to pass an optional profileid. To do that
use following syntax:
<interface type='bridge'>
<source bridge='ovsbr'/>
<mac address='00:55:1a:65:a2:8d'/>
<virtualport type='openvswitch'>
<parameters interfaceid='921a80cd-e6de-5a2e-db9c-ab27f15a6e1d'
profileid='test-profile'/>
</virtualport>
</interface>
To create Open vSwitch bridge install Open vSwitch and
run the following command:
ovs-vsctl add-br ovsbr
The current default method of terminating the qemu process is to send
a SIGTERM, wait for up to 1.6 seconds for it to cleanly shutdown, then
send a SIGKILL and wait for up to 1.4 seconds more for the process to
terminate. This is problematic because occasionally 1.6 seconds is not
long enough for the qemu process to flush its disk buffers, so the
guest's disk ends up in an inconsistent state.
Since this only occasionally happens when the timeout prior to SIGKILL
is 1.6 seconds, this patch increases that timeout to 10 seconds. At
the very least, this should reduce the occurrence from "occasionally"
to "extremely rarely". (Once SIGKILL is sent, it waits another 5
seconds for the process to die before returning).
Note that in the cases where it takes less than this for qemu to
shutdown cleanly, libvirt will *not* wait for any longer than it would
without this patch - qemuProcessKill polls the process and returns as
soon as it is gone.
This patch is based on an earlier patch by Eric Blake which was never
committed:
https://www.redhat.com/archives/libvir-list/2011-November/msg00243.html
Aside from rebasing, this patch only drops the driver lock once (prior
to the first time the function sleeps), then leaves it dropped until
it returns (Eric's patch would drop and re-acquire the lock around
each call to sleep).
At the time Eric sent his patch, the response (from Dan Berrange) was
that, while it wasn't a good thing to be holding the driver lock while
sleeping, we really need to rethink locking wrt the driver object,
switching to a finer-grained approach that locks individual items
within the driver object separately to allow for greater concurrency.
This is a good plan, and at the time it made sense to not apply the
patch because there was no known bug related to the driver lock being
held in this function.
However, we now know that the length of the wait in qemuProcessKill is
sometimes too short to allow the qemu process to fully flush its disk
cache before SIGKILL is sent, so we need to lengthen the timeout (in
order to improve the situation with management applications until they
can be updated to use the new VIR_DOMAIN_DESTROY_GRACEFUL flag added
in commit 72f8a7f197). But, if we
lengthen the timeout, we also lengthen the amount of time that all
other threads in libvirtd are essentially blocked from doing anything
(since just about everything needs to acquire the driver lock, if only
for long enough to get a pointer to a domain).
The solution is to modify qemuProcessKill to drop the driver lock
while sleeping, as proposed in Eric's patch. Then we can increase the
timeout with a clear conscience, and thus at least lower the chances
that someone running with existing management software will suffer the
consequence's of qemu's disk cache not being flushed.
In the meantime, we still should work on Dan's proposal to make
locking within the driver object more fine grained.
(NB: although I couldn't find any instance where qemuProcessKill() was
called with no jobs active for the domain (or some other guarantee
that the current thread had at least one refcount on the domain
object), this patch still follows Eric's method of temporarily adding
a ref prior to unlocking the domain object, because I couldn't
convince myself 100% that this was the case.)
In the future (my next patch in fact) we may want to make
decisions depending on qemu having a monitor command or not.
Therefore, we want to set qemuCaps flag instead of querying
on the monitor each time we are about to make that decision.
When blkdeviotune was first committed in 0.9.8, we had the limitation
that setting one value reset all others. But bytes and iops should
be relatively independent. Furthermore, setting tuning values on
a live domain followed by dumpxml did not output the new settings.
* src/qemu/qemu_driver.c (qemuDiskPathToAlias): Add parameter, and
update callers.
(qemuDomainSetBlockIoTune): Don't lose previous unrelated
settings. Make live changes reflect to dumpxml output.
* tools/virsh.pod (blkdeviotune): Update documentation.
Detected by valgrind. Leaks are introduced in commit c1b2264.
* src/remote/remote_driver.c (doRemoteOpen): free client program memory in failure path.
* How to reproduce?
% valgrind -v --leak-check=full virsh -c qemu:
* Actual result
==3969== 40 bytes in 1 blocks are definitely lost in loss record 8 of 28
==3969== at 0x4A04A28: calloc (vg_replace_malloc.c:467)
==3969== by 0x4C89C41: virAlloc (memory.c:101)
==3969== by 0x4D5A236: virNetClientProgramNew (virnetclientprogram.c:60)
==3969== by 0x4D47AB4: doRemoteOpen (remote_driver.c:658)
==3969== by 0x4D49FFF: remoteOpen (remote_driver.c:871)
==3969== by 0x4D13373: do_open (libvirt.c:1196)
==3969== by 0x4D14535: virConnectOpenAuth (libvirt.c:1422)
==3969== by 0x425627: main (virsh.c:18537)
==3969==
==3969== 40 bytes in 1 blocks are definitely lost in loss record 9 of 28
==3969== at 0x4A04A28: calloc (vg_replace_malloc.c:467)
==3969== by 0x4C89C41: virAlloc (memory.c:101)
==3969== by 0x4D5A236: virNetClientProgramNew (virnetclientprogram.c:60)
==3969== by 0x4D47AD7: doRemoteOpen (remote_driver.c:664)
==3969== by 0x4D49FFF: remoteOpen (remote_driver.c:871)
==3969== by 0x4D13373: do_open (libvirt.c:1196)
==3969== by 0x4D14535: virConnectOpenAuth (libvirt.c:1422)
==3969== by 0x425627: main (virsh.c:18537)
==3969==
==3969== LEAK SUMMARY:
==3969== definitely lost: 80 bytes in 2 blocks
Signed-off-by: Alex Jia <ajia@redhat.com>
The auto-generated WWN comply with the new addressing schema of WWN:
<quote>
the first nibble is either hex 5 or 6 followed by a 3-byte vendor
identifier and 36 bits for a vendor-specified serial number.
</quote>
We choose hex 5 for the first nibble. And for the 3-bytes vendor ID,
we uses the OUI according to underlying hypervisor type, (invoking
virConnectGetType to get the virt type). e.g. If virConnectGetType
returns "QEMU", we use Qumranet's OUI (00:1A:4A), if returns
ESX|VMWARE, we use VMWARE's OUI (00:05:69). Currently it only
supports qemu|xen|libxl|xenapi|hyperv|esx|vmware drivers. The last
36 bits are auto-generated.
Some audit records generated by libvirt contain fields enclosed by single
quotes. Since those fields are inside the msg field, which is enclosed by
single quotes, these records generated by libvirt are not correctly parsed by
libauparse.
Some tools, such as virt-manager, prefers having the default USB
controller explicit in the XML document. This patch makes sure there
is one. With this patch, it is now possible to switch from USB1 to
USB2 from the release 0.9.1 of virt-manager.
Fix tests to pass with this change.
virsh blkiotune dom --device-weights /dev/sda,400 --config
wasn't working correctly.
* src/qemu/qemu_driver.c (qemuDomainSetBlkioParameters): Use
correct definition.
Now that no one is relying on the return value being a pointer to
somewhere inside of the passed-in argument, we can simplify the
callers to simply return success or failure. Also wrap some long
lines and add some const-correctness.
* src/util/sysinfo.c (virSysinfoParseBIOS, virSysinfoParseSystem)
(virSysinfoParseProcessor, virSysinfoParseMemory): Change return.
(virSysinfoRead): Adjust caller.
Reported by Alex Jia:
==21503== 112 (32 direct, 80 indirect) bytes in 1 blocks are
definitely lost in loss record 37 of 40
==21503== at 0x4A04A28: calloc (vg_replace_malloc.c:467)
==21503== by 0x4A8991: virAlloc (memory.c:101)
==21503== by 0x505A6C: x86DataCopy (cpu_x86.c:247)
==21503== by 0x507B34: x86Compute (cpu_x86.c:1225)
==21503== by 0x43103C: qemuBuildCommandLine (qemu_command.c:3561)
==21503== by 0x41C9F7: testCompareXMLToArgvHelper
(qemuxml2argvtest.c:183)
==21503== by 0x41E10D: virtTestRun (testutils.c:141)
==21503== by 0x41B942: mymain (qemuxml2argvtest.c:705)
==21503== by 0x41D7E7: virtTestMain (testutils.c:696)
In case the caller specifies that confined guests are required but the
security driver turns out to be 'none', we should return an error since
this driver clearly cannot meet that requirement. As a result of this
error, libvirtd fails to start when the host admin explicitly sets
confined guests are required but there is no security driver available.
Since security driver 'none' cannot create confined guests, we override
default confined setting so that hypervisor drivers do not thing they
should create confined guests.
Security label type 'none' requires relabel to be set to 'no' so there's
no reason to output this extra attribute. Moreover, since relabel is
internally stored in a negative from (norelabel), the default value for
relabel would be 'yes' in case there is no <seclabel> element in domain
configuration. In case VIR_DOMAIN_SECLABEL_DEFAULT turns into
VIR_DOMAIN_SECLABEL_NONE, we would incorrectly output relabel='yes' for
seclabel type 'none'.
Qemu uses non-blocking I/O which doesn't play nice with regular file
descriptors. We need to pass a pipe to qemu instead, which can easily be
done using iohelper.
virFileDirectFd was used for accessing files opened with O_DIRECT using
libvirt_iohelper. We will want to use the helper for accessing files
regardless on O_DIRECT and thus virFileDirectFd was generalized and
renamed to virFileWrapperFd.
dmidecode displays processor information, followed by BIOS, system and
memory-DIMM details.
Calls to virSysinfoParseBIOS(), virSysinfoParseSystem() would update
the buffer pointer 'base', so the processor information would be lost
before virSysinfoParseProcessor() was called. Sysinfo would therefore
not be able to display processor details -- It only described <bios>,
<system> and <memory_device> details.
This patch attempts to insulate sysinfo from ordering of dmidecode
output.
Before the fix:
---------------
virsh # sysinfo
<sysinfo type='smbios'>
<bios>
....
</bios>
<system>
....
</system>
<memory_device>
....
</memory_device>
After the fix:
-------------
virsh # sysinfo
<sysinfo type='smbios'>
<bios>
....
</bios>
<system>
....
</system>
<processor>
....
</processor>
<memory_device>
....
</memory_device>
Input to the volume cloning code is a source volume and an XML
descriptor for the new volume. It is possible for the new volume
to have a greater size than source volume, at which point libvirt
will just stick 0s on the end of the new image (for raw format
anyways).
Unfortunately a logic error messed up our tracking of the of the
excess amount that needed to be written: end result is that sparse
clones were made very much non-sparse, and cloning regular disk
images could end up excessively sized (though data unaltered).
Drop the 'remain' variable entriely here since it's redundant, and
track actual allocation directly against the desired 'total'.
gcc 4.7 complains:
util/virhashcode.c:49:17: error: always_inline function might not be inlinable [-Werror=attributes]
util/virhashcode.c:35:17: error: always_inline function might not be inlinable [-Werror=attributes]
Normal 'inline' is a hint that the compiler may ignore; the fact
that the function is static is good enough. We don't care if the
compiler decided not to inline after all.
* src/util/virhashcode.c (getblock, fmix): Relax attribute.
On CentOS5:
If "virsh edit $DOM" is used and an error happens (for example changing
any live cycle action to a non-existing value), libvirt forgets that
$DOM exists, since it is already removed from the internal hash tables,
which are used for domain lookup.
In once case (unreproducible) even the persistent configuration
/etc/xen/$DOM was deleted.
Instead of using the compound function xenXMConfigSaveFile() explicitly
use xenFomatXM() and virConfWriteFile() to distinguish between a failure
in converting the libvirt definition to the xen-xm format and a problem
when writing the file.
Signed-off-by: Philipp Hahn <hahn@univention.de>
Commit b170eb99 introduced a bug: domains that had an explicit
<seclabel type='none'/> when started would not be reparsed if
libvirtd restarted. It turns out that our testsuite was not
exercising this because it never tried anything but inactive
parsing. Additionally, the live XML for such a domain failed
to re-validate. Applying just the tests/ portion of this patch
will expose the bugs that are fixed by the other two files.
* docs/schemas/domaincommon.rng (seclabel): Allow relabel under
type='none'.
* src/conf/domain_conf.c (virSecurityLabelDefParseXML): Per RNG,
presence of <seclabel> with no type implies dynamic. Don't
require sub-elements for type='none'.
* tests/qemuxml2xmltest.c (mymain): Add test.
* tests/qemuxml2argvtest.c (mymain): Likewise.
* tests/qemuxml2argvdata/qemuxml2argv-seclabel-none.xml: Add file.
* tests/qemuxml2argvdata/qemuxml2argv-seclabel-none.args: Add file.
Reported by Ansis Atteka.
On CentOS5 with xen-3.0.3:
Program received signal SIGSEGV, Segmentation fault.
virFree (ptrptr=0x8) at util/memory.c:310
310 free(*(void**)ptrptr);
(gdb) bt
#0 virFree (ptrptr=0x8) at util/memory.c:310
#1 0x00002aaaaae167c8 in xenXMDomainDefineXML (conn=0x694e80, xml=0x6b2ce0 "P\fk") at xen/xm_internal.c:1199
#2 0x00002aaaaae070d7 in xenUnifiedDomainDefineXML (conn=0x8,
xml=0x6ac040 "<domain type='xen'>\n <name>pv</name>\n <uuid>20291bc0-453a-4d6c-c6ac-4e5af63b932c</uuid>\n <memory>1048576</memory>\n <currentMemory>1048576</currentMemory>\n <vcpu>1</vcpu>\n <os>\n <type arch='x8"...) at xen/xen_driver.c:1524
#3 0x00002aaaaada7803 in virDomainDefineXML (conn=0x694e80,
xml=0x6ac040 "<domain type='xen'>\n <name>pv</name>\n <uuid>20291bc0-453a-4d6c-c6ac-4e5af63b932c</uuid>\n <memory>1048576</memory>\n <currentMemory>1048576</currentMemory>\n <vcpu>1</vcpu>\n <os>\n <type arch='x8"...) at libvirt.c:7823
#4 0x0000000000426173 in cmdEdit (ctl=0x7fffffffb8e0, cmd=<value optimized out>) at virsh.c:14882
#5 0x000000000041c9ce in vshCommandRun (ctl=0x7fffffffb8e0, cmd=0x658c50) at virsh.c:17712
#6 0x000000000042c3b9 in main (argc=1, argv=<value optimized out>) at virsh.c:19317
Signed-off-by: Philipp Hahn <hahn@univention.de>
Calling qemuDomainMigrateGraphicsRelocate notifies spice clients to
connect to destination qemu so that they can seamlessly switch streams
once migration is done. Unfortunately, current qemu is not able to
accept any connections while incoming migration connection is open.
Thus, we need to delay opening the migration connection to the point
spice client is already connected to the destination qemu.
Unlike .cvsignore under CVS, git allows for ignoring nested
names. We weren't very consistent where new tests were
being ignored (some in .gitignore, some in tests/.gitignore),
and I found it easier to just consolidate everything.
* .gitignore: Subsume entries from subdirectories.
* daemon/.gitignore: Delete.
* docs/.gitignore: Likewise.
* docs/devhelp/.gitignore: Likewise.
* docs/html/.gitignore: Likewise.
* examples/dominfo/.gitignore: Likewise.
* examples/domsuspend/.gitignore: Likewise.
* examples/hellolibvirt/.gitignore: Likewise.
* examples/openauth/.gitignore: Likewise.
* examples/domain-events/events-c/.gitignore: Likewise.
* include/libvirt/.gitignore: Likewise.
* src/.gitignore: Likewise.
* src/esx/.gitignore: Likewise.
* tests/.gitignore: Likewise.
* tools/.gitignore: Likewise.
This eliminates the warning message reported in:
https://bugzilla.redhat.com/show_bug.cgi?id=624447
It was caused by a failure to open an image file that is not
accessible by root (the uid libvirtd is running as) because it's on a
root-squash NFS share, owned by a different user, with permissions of
660 (or maybe 600).
The solution is to use virFileOpenAs() rather than open(). The
codepath that generates the error is during qemuSetupDiskCGroup(), but
the actual open() is in a lower-level generic function called from
many places (virDomainDiskDefForeachPath), so some other pieces of the
code were touched just to add dummy (or possibly useful) uid and gid
arguments.
Eliminating this warning message has the nice side effect that the
requested operation may even succeed (which in this case isn't
necessary, but shouldn't hurt anything either).
virFileOpenAs previously would only try opening a file as the current
user, or as a different user, but wouldn't try both methods in a
single call. This made it cumbersome to use as a replacement for
open(2). Additionally, it had a lot of historical baggage that led to
it being difficult to understand.
This patch refactors virFileOpenAs in the following ways:
* reorganize the code so that everything dealing with both the parent
and child sides of the "fork+setuid+setgid+open" method are in a
separate function. This makes the public function easier to understand.
* Allow a single call to virFileOpenAs() to first attempt the open as
the current user, and if that fails to automatically re-try after
doing fork+setuid (if deemed appropriate, i.e. errno indicates it
would now be successful, and the file is on a networkFS). This makes
it possible (in many, but possibly not all, cases) to drop-in
virFileOpenAs() as a replacement for open(2).
(NB: currently qemuOpenFile() calls virFileOpenAs() twice, once
without forking, then again with forking. That unfortunately can't
be changed without at least some discussion of the ramifications,
because the requested file permissions are different in each case,
which is something that a single call to virFileOpenAs() can't deal
with.)
* Add a flag so that any fchown() of the file to a different uid:gid
is explicitly requested when the function is called, rather than it
being implied by the presence of the O_CREAT flag. This just makes
for less subtle surprises to consumers. (Commit
b1643dc15c added the check for O_CREAT
before forcing ownership. This patch just makes that restriction
more explicit.)
* If either the uid or gid is specified as "-1", virFileOpenAs will
interpret this to mean "the current [gu]id".
All current consumers of virFileOpenAs should retain their present
behavior (after a few minor changes to their setup code and
arguments).
