Convert drivers currently using the qparams APIs, to instead
use the virURIPtr query parameters directly.
* src/esx/esx_util.c, src/hyperv/hyperv_util.c,
src/remote/remote_driver.c, src/xenapi/xenapi_utils.c: Remove
use of qparams
* src/util/qparams.h, src/util/qparams.c: Delete
* src/Makefile.am, src/libvirt_private.syms: Remove qparams
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Avoid the need for each driver to parse query parameters itself
by storing them directly in the virURIPtr struct. The parsing
code is a copy of that from src/util/qparams.c The latter will
be removed in a later patch
* src/util/viruri.h: Add query params to virURIPtr
* src/util/viruri.c: Parse query parameters when creating virURIPtr
* tests/viruritest.c: Expand test to cover params
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Instead of just typedef'ing the xmlURIPtr struct for virURIPtr,
use a custom libvirt struct. This allows us to fix various
problems with libxml2. This initially just fixes the query vs
query_raw handling problems.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The parameter in the virURIFormat impl mistakenly used the
xmlURIPtr type, instead of virURIPtr. Since they will soon
cease to be identical, this needs fixing
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Since we defined a custom virURIPtr type, we should use a
virURIFree method instead of assuming it will always be
a typedef for xmlURIPtr
* src/util/viruri.c, src/util/viruri.h, src/libvirt_private.syms:
Add a virURIFree method
* src/datatypes.c, src/esx/esx_driver.c, src/libvirt.c,
src/qemu/qemu_migration.c, src/vmx/vmx.c, src/xen/xend_internal.c,
tests/viruritest.c: s/xmlFreeURI/virURIFree/
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To ensure we properly escape & unescape IPv6 numeric addresses,
add a test case
* tests/Makefile.am, tests/viruritest.c: URI parsing test
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently the libvirt.service unit file for systemd does not
specify any kill mode. So systemd kills off every process
inside its cgroup. ie all dnsmasq processes, all virtual
machines. This obviously not what we want. Set KillMode=process
so that it only kills the top level process of libvirtd
* daemon/libvirtd.service.in: Add KillMode=process
Reported-By: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
virsh.pod had several instances in which it referred to "the
documentation" which was a little puzzling to me since it is
documentation. Reading the document from end to end makes it clear
that it means a specific URI which was noted previously in the text,
but I had never noticed those URIs in several years of referring to
the man page. This patch adds those URIs to several additional places
in the text.
Detected by valgrind. Leaks are introduced in commit 4955602.
* python/libvirt-override.c (libvirt_virNodeGetCPUStats): fix memory leaks
and improve codes return value.
For details, please see the following link:
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=770943
Signed-off-by: Alex Jia <ajia@redhat.com>
On machines with massive amounts of CPUs, the gnulib 'test-lock'
could take minutes, or even appear to deadlock, because of poor
scaling of timing interactions between multiple cores.
See https://bugzilla.redhat.com/show_bug.cgi?id=797284.
For precedence, note that iwhd has done the same:
https://lists.gnu.org/archive/html/bug-gnulib/2012-01/msg00311.html
We can re-enable things if gnulib ever analyzes and improves the
situation.
* bootstrap.conf (gnulib_tool_option_extras): Avoid lock-tests.
When a client which started non-p2p migration dies in a bad time, the
source libvirtd never clears the migration job and almost nothing can be
done with the domain without restarting the daemon. This patch makes use
of connection close callbacks and ensures that migration job is properly
discarded when the client disconnects.
Destination daemon should not rely on the client or source daemon
(depending on the type of migration) to call Finish when migration
fails, because the client may crash before it can do so. The domain
prepared for incoming migration is set to be destroyed (and migration
job cleaned up) when connection with the client closes but this is not
enough. If the associated qemu process crashes after Prepare step and
the domain is cleaned up before the connection gets closed, autodestroy
is not called for the domain and migration jobs remains set. In case the
domain is defined on destination host (i.e., it is not completely
removed once destroyed) we keep the job set for ever. To fix this, we
register a cleanup callback which is responsible to clean migration-in
job when a domain dies anywhere between Prepare and Finish steps. Note
that we can't blindly clean any job when spotting EOF on monitor since
normally an API is running at that time.
This reverts commit 61f2b6ba5f and most of
commit d8916dc8e2, which effectively
brings back commit ef1065cf5a written by
Jim Fehlig:
The qemu migration speed default is 32MiB/s as defined in migration.c
/* Migration speed throttling */
static int64_t max_throttle = (32 << 20);
There's no need to throttle migration when targeting a file, so set
migration speed to unlimited prior to migration, and restore to libvirt
default value after migration.
Default units is MB for migrate_set_speed monitor command, so
(INT64_MAX / (1024 * 1024)) is used for unlimited migration speed.
This was reverted because migration to file could not be canceled and
even monitored since qemu was not processing any monitor commands until
the migration finished. This is now different as we make sure the
file descriptor we pass to qemu is able to properly report EAGAIN.
Recent qemu changes might have helped as well.
I tested managedsave with this patch in and indeed, it is 10x faster
while I can still monitor its progress.
Detected by valgrind. Leaks are introduced in commit 17c7795.
* python/libvirt-override.c (libvirt_virNodeGetMemoryStats): fix memory leaks
and improve codes return value.
For details, please see the following link:
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=770944
Signed-off-by: Alex Jia <ajia@redhat.com>
On RHEL 5.7, I got this compilation failure:
In file included from /usr/include/python2.4/pyport.h:98,
from /usr/include/python2.4/Python.h:55,
from libvirt.c:3:
../gnulib/lib/time.h:468: error: expected ';', ',' or ')' before '__timer'
Turns out that our '#define restrict __restrict' from config.h wasn't
being picked up. Gnulib _requires_ that all .c files include <config.h>
first, otherwise the gnulib header overrides tend to misbehave.
Problem introduced by patch c700613b8.
* python/generator.py (buildStubs): Include <config.h> first.
A few times libvirt users manually setting mac addresses have
complained of a networking failure that ends up being due to a multicast
mac address being used for a guest interface. This patch prevents that
by logging an error and failing if a multicast mac address is
encountered in each of the three following cases:
1) domain xml <interface> mac address.
2) network xml bridge mac address.
3) network xml dhcp/host mac address.
There are several other places where a mac address can be input that
aren't controlled in this manner because failure to do so has no
consequences (e.g., if the address will be used to search through
existing interfaces for a match).
The RNG has been updated to add multiMacAddr and uniMacAddr along with
the existing macAddr, and macAddr was switched to uniMacAddr where
appropriate.
If an error was encountered parsing a dhcp host entry mac address or
name, parsing would continue and log a less descriptive error that
might make it more difficult to notice the true nature of the problem.
This patch returns immediately on logging the first error.
This patch is in response to:
https://bugzilla.redhat.com/show_bug.cgi?id=798467
If a guest's tap device is created using the same MAC address the
guest uses for its own network card (which connects to the tap
device), the Linux kernel will log the following message and traffic
will not pass:
kernel: vnet9: received packet with own address as source address
This patch disallows MAC addresses with a first byte of 0xFE, but only in
the case that the MAC address is used for a guest interface that's
connected by way of a standard tap device. (In other words, the
validation is done at runtime at the same place the MAC address is
modified for the tap device, rather than when mac address is parsed,
the idea being that it is then we know for sure the address will be
problematic.)
Using inheritance, this patch cleans up the cpu_map.xml file and also
sorts all CPU features according to the feature and registry
values. Model features are sorted the same way as foeatures in the
specification.
Also few models that are related were organized together and parts of
the XML are marked with comments
If a guest is paused, we were silently ignoring the quiesce flag,
which results in unclean snapshots, contrary to the intent of the
flag. Since we can't quiesce without guest agent support, we should
instead fail if the guest is not running.
Meanwhile, if we attempt a quiesce command, but the guest agent
doesn't respond, and we time out, we may have left the command
pending on the guest's queue, and when the guest resumes parsing
commands, it will freeze even though our command is no longer
around to issue a thaw. To be safe, we must _always_ pair every
quiesce call with a counterpart thaw, even if the quiesce call
failed due to a timeout, so that if a guest wakes up and starts
processing a command backlog, it will not get stuck in a frozen
state.
* src/qemu/qemu_driver.c (qemuDomainSnapshotCreateDiskActive):
Always issue thaw after a quiesce, even if quiesce failed.
(qemuDomainSnapshotFSThaw): Add a parameter.
This patch fixes a NULL pointer check that was causing SegFault on
some specific configurations. It also reverts commit 59d0c9801c
that was checking for this value in one place.
A common coding pattern for changing blkio parameters is
1. virDomainGetBlkioParameters
2. change one or more params
3. virDomainSetBlkioParameters
For this to work, it must be possible to roundtrip through
the methods without error. Unfortunately virDomainGetBlkioParameters
will return "" for the deviceWeight parameter for guests by default,
which virDomainSetBlkioParameters will then reject as invalid.
This fixes the handling of "" to be a no-op, and also improves the
error message to tell you what was invalid
How to reproduce:
% valgrind -v --leak-check=full virsh migrate mig \
qemu+ssh://$dest/system --unsafe
== 8 bytes in 1 blocks are definitely lost in loss record 1 of 28
== at 0x4A04A28: calloc (vg_replace_malloc.c:467)
== by 0x3EB7115FB8: xdr_reference (in /lib64/libc-2.12.so)
== by 0x3EB7115F10: xdr_pointer (in /lib64/libc-2.12.so)
== by 0x4D1EA84: xdr_remote_string (remote_protocol.c:40)
== by 0x4D1EAD8: xdr_remote_domain_migrate_prepare3_ret (remote_protocol.c:4772)
== by 0x4D2FFD2: virNetMessageDecodePayload (virnetmessage.c:382)
== by 0x4D2789C: virNetClientProgramCall (virnetclientprogram.c:382)
== by 0x4D0707D: callWithFD (remote_driver.c:4549)
== by 0x4D070FB: call (remote_driver.c:4570)
== by 0x4D12AEE: remoteDomainMigratePrepare3 (remote_driver.c:4138)
== by 0x4CF7BE9: virDomainMigrateVersion3 (libvirt.c:4815)
== by 0x4CF9432: virDomainMigrate2 (libvirt.c:5454)
==
== LEAK SUMMARY:
== definitely lost: 8 bytes in 1 blocks
== indirectly lost: 0 bytes in 0 blocks
== possibly lost: 0 bytes in 0 blocks
== still reachable: 126,995 bytes in 1,343 blocks
== suppressed: 0 bytes in 0 blocks
This patch also fixes the leaks in remoteDomainMigratePrepare and
remoteDomainMigratePrepare2.
* src/libvirt.c (virStorageVolResize): correct comment typo according to
virStorageVolResizeFlags enum definition.
Signed-off-by: Alex Jia <ajia@redhat.com>
If no <interface> elements are included in an LXC guest XML
description, then the LXC guest will just see the host's
network interfaces. It is desirable to be able to hide the
host interfaces, without having to define any guest interfaces.
This patch introduces a new feature flag <privnet/> to allow
forcing of a private network namespace for LXC. In the future
I also anticipate that we will add <privuser/> to force a
private user ID namespace.
* src/conf/domain_conf.c, src/conf/domain_conf.h: Add support
for <privnet/> feature. Auto-set <privnet> if any <interface>
devices are defined
* src/lxc/lxc_container.c: Honour request for private network
namespace
Commit e457d5ef20 adds ability to pass the
default URI using the client configuration file. If the file is not
present, it still accesses the NULL config object causing a segfault.
Caught running "make check".
Wire up the domain graphics event notifications for SPICE. Adapted
from a RHEL-only patch written by Dan Berrange that used custom
__com.redhat_SPICE events - equivalent events are now available in
upstream QEMU (including a SPICE_CONNECTED event, which was missing in
the __COM.redhat_SPICE version).
* src/qemu/qemu_monitor_json.c: Wire up SPICE graphics events
Currently if the URI passed to virConnectOpen* is NULL, then we
- Look for LIBVIRT_DEFAULT_URI env var
- Probe for drivers
This changes it so that
- Look for LIBVIRT_DEFAULT_URI env var
- Look for 'uri_default' in $HOME/.libvirt/libvirt.conf
- Probe for drivers
numad is an user-level daemon that monitors NUMA topology and
processes resource consumption to facilitate good NUMA resource
alignment of applications/virtual machines to improve performance
and minimize cost of remote memory latencies. It provides a
pre-placement advisory interface, so significant processes can
be pre-bound to nodes with sufficient available resources.
More details: http://fedoraproject.org/wiki/Features/numad
"numad -w ncpus:memory_amount" is the advisory interface numad
provides currently.
This patch add the support by introducing a new XML attribute
for <vcpu>. e.g.
<vcpu placement="auto">4</vcpu>
<vcpu placement="static" cpuset="1-10^6">4</vcpu>
The returned advisory nodeset from numad will be printed
in domain's dumped XML. e.g.
<vcpu placement="auto" cpuset="1-10^6">4</vcpu>
If placement is "auto", the number of vcpus and the current
memory amount specified in domain XML will be used for numad
command line (numad uses MB for memory amount):
numad -w $num_of_vcpus:$current_memory_amount / 1024
The advisory nodeset returned from numad will be used to set
domain process CPU affinity then. (e.g. qemuProcessInitCpuAffinity).
If the user specifies both CPU affinity policy (e.g.
(<vcpu cpuset="1-10,^7,^8">4</vcpu>) and placement == "auto"
the specified CPU affinity will be overridden.
Only QEMU/KVM drivers support it now.
See docs update in patch for more details.
With current code, we pass true iff domain is cold booting. However,
if disk is inaccessible and startupPolicy for that disk is set to
'requisite' we have to fail iff cold booting.
AMD Bulldozer (or Opteron_G4 as called in QEMU) was added to the list
of cpu models, flags were taken from upstream qemu cpu specifications
and should be sorted by bit values (or first occurence in the feature
specification part of cpu_map.xml).
Based on QEMU upstream commit 885bb0369a4f0abe2c0185178f3cb347cb02cdf1.
Even though we say in documentation setting (tls-)port to -1 is legacy
compat style for enabling autoport, we're roughly doing this for VNC.
However, in case of SPICE auto enable autoport iff both port & tlsPort
are equal -1 as documentation says autoport plays with both.
In qemuDomainDetachNetDevice, detach was being used before it had been
validated. If no matching device was found, this resulted in a
dereference of a NULL pointer.
This behavior was a regression introduced in commit
cf90342be0, so it has not been a part of
any official libvirt release.
When host-model and host-passthrouh CPU modes were introduced, qemu
driver was properly modify to update guest CPU definition during
migration so that we use the right CPU at the destination. However,
similar treatment is needed for (managed)save and snapshots since they
need to save the exact CPU so that a domain can be properly restored.
To avoid repetition of such situation, all places that need live XML
share the code which generates it.
As a side effect, this patch fixes error reporting from
qemuDomainSnapshotWriteMetadata().
