The socket test suite has a function for checking if IPv4
or IPv6 are available, and returning a free socket. The
first bit of that will be needed in another test, so pull
that logic out into a separate helper method.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
By default, getaddrinfo() will return addresses for both
IPv4 and IPv6 if both protocols are enabled, and so the
RPC code will listen/connect to both protocols too. There
may be cases where it is desirable to restrict this to
just one of the two protocols, so add an 'int family'
parameter to all the TCP related APIs.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
dnsmasq conf file contents needs to have quotes escaped for it to
work. Because of this, the network-create/start for a network with
quotes in the name fails. The patch escapes strings for the entries
that go into the conf file.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
qemu 2.3.0 added the -cpu host,aarch64=off option, which allows using
qemu-system-aarch64 KVM to run armv7l VMs.
Add a capabilities check for it, wire it up in qemu_command, and test
the command line generation.
Not every architecture out there has 'char' signed by default.
For instance, my arm box has it unsigned by default:
$ gcc -dM -E - < /dev/null | grep __CHAR_UNSIGNED__
#define __CHAR_UNSIGNED__ 1
Therefore, after 65c61e50 the test if failing for me. Problem is,
we are trying to assign couple of negative values into char
assuming some will overflow and some don't. That can't be the
case if 'char' is unsigned by default. Lets use more explicit types
instead: int8_t and uint8_t where is no ambiguity.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We have been formatting the first serial device also
as a console device, but only if there were no other consoles.
If there is a <serial> device present in the XML, but no serial
<console>, or if there isn't any <console> at all but the domain
definition hasn't gone through a parse->format->parse round-trip,
the <console> device would not be formatted.
Change the code to always add the stub device for the first
serial device.
Fixes https://bugzilla.redhat.com/show_bug.cgi?id=1089914
virSocketAddrGetRange() has been updated to take the network address
and prefix, and now checks that both the start and end of the range
are within that network, thus validating that the entire range of
addresses is in the network. For IPv4, it also checks that ranges to
not start with the "network address" of the subnet, nor end with the
broadcast address of the subnet (this check doesn't apply to IPv6,
since IPv6 doesn't have a broadcast or network address)
Negative tests have been added to the network update and socket tests
to verify that bad ranges properly generate an error.
This resolves: https://bugzilla.redhat.com/show_bug.cgi?id=985653
This was revealed when I made a cut-paste mistake in an upgrade to
virSocketAddrGetRange(), leading to failure to check for the end
address being outside of the defined network, but a negative test case
that should have caught the error instead returned success.
The problem was that testRange in sockettest.c was written so that
when it expected a failure, even an "unexpected success" would be
considered as an "expected failure" because of the way the check in
testRange was done. testRange had this:
if (gotsize < 0 || gotsize != size) {
return pass ? -1 : 0;
} else {
return pass ? 0 : -1;
}
but all the tests that expected a failure give "-1" as the expected
size. So in a case where we expect a failure, we would have pass ==
false and size == -1. If virSocketAddrGetRange() was incorrectly
*successful* (returned some positive number), then "gotsize != size"
would be, e.g. "276 != -1", so we would take the if clause and, since
pass == false, we would return 0 (success i.e. expected failure).
The solution is that in the case where we expect failure, we should
just ignore size - virSocketAddrGetRange() must return -1 in order for
us to report "expected failure == success".
Part of fix for: https://bugzilla.redhat.com/show_bug.cgi?id=985653
The new tests deal with numeric options of three kinds: regular,
scaled and timeouts. For each, both valid and invalid inputs
are provided, hopefully covering all cases: this should allow us
to avoid regressions when changing the relevant code in virsh.
The guest firmware provides the same functionality as the pvpanic
device, and the relevant element should always be present in the
domain XML to reflect this fact, so add it after parsing the
definition if it wasn't there already.
The guest firmware provides the same functionality as the pvpanic
device, which is not available in QEMU on pSeries, so the domain
XML should be allowed to contain the <panic> element.
On the other hand, unlike the pvpanic device, the guest firmware
can't be configured, so report an error if an address has been
provided in the XML.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1182388
The XML parser sets a default <mode> if none is explicitly passed in.
This is then used at pool/vol creation time, and unconditionally reported
in the XML.
The problem with this approach is that it's impossible for other code
to determine if the user explicitly requested a storage mode. There
are some cases where we want to make this distinction, but we currently
can't.
Handle <mode> parsing like we handle <owner>/<group>: if no value is
passed in, set it to -1, and adjust the internal consumers to handle
it.
As of netcf-0.2.8, netcf supports configuring multipl IPv4 addresses,
as well as simultaneously configuring dhcp and static IPv4 addresses,
on a single interface. This patch updates libvirt's interface.rng to
allow such configurations.
This resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1223688
Due to a kernel commit (b4b8f770e), cpuinfo format has changed on
ARMs. Firstly, 'Processor: ...' may not be reported, it's
replaced by 'model name: ...'. Secondly, the "Processor" string
may occur in CPU name, e.g. 'ARMv7 Processor rev 5 (v7l)'.
Therefore, we must firstly look for 'model name' and then for
'Processor' if not found.
Moreover, lines in the cpuinfo file are shuffled, so we better
not manipulate the pointer to start of internal buffer as we may
lost some info.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=998813
Implementation is pretty straight-forward. Of course, not all qemus
out there supports the device, so new capability is introduced and
checked prior each use of the device.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=998813
Like usb-serial, the pci-serial device allows a serial device to be
attached to PCI bus. An example XML looks like this:
<serial type='dev'>
<source path='/dev/ttyS2'/>
<target type='pci-serial' port='0'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/>
</serial>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
After parsing the memory device XML the function would not restore the
XML parser context causing invalid XPath starting point for the rest of
the elements. This is a regression since 3e4230d2.
The test case addition uses the <idmap> element that is currently unused
by qemu, but parsed after the memory device definition and formatted
always.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1223631
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
From xl.cfg950 man page:
spiceagent_mouse=BOOLEAN
Whether SPICE agent is used for client mouse mode. The default is
true (1) (turn on)
spicevdagent=BOOLEAN
Enables spice vdagent. The Spice vdagent is an optional component for
enhancing user experience and performing guest-oriented management
tasks. Its features includes: client mouse mode (no need to grab
mouse by client, no mouse lag), automatic adjustment of screen
resolution, copy and paste (text and image) between client and domU.
It also requires vdagent service installed on domU o.s. to work.
The default is 0.
spice_clipboard_sharing=BOOLEAN
Enables Spice clipboard sharing (copy/paste). It requires spicevdagent
enabled. The default is false (0).
So if spiceagent_mouse is enabled (client mouse mode) or
spice_clipboard_sharing is enabled, spicevdagent must be enabled.
Along with this change, s/spicedvagent/spicevdagent, set
spiceagent_mouse correctly, and add a test for these spice
features.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
The logic related to spicedisable_ticketing and spicepasswd was
inverted. As per man xl.cfg(5), 'spicedisable_ticketing = 1'
means no passwd is required. On the other hand, a passwd is
required if 'spicedisable_ticketing = 0'. Fix the logic and
produce and error if 'spicedisable_ticketing = 0' but spicepasswd
is not provided. Also fix the spice cfg test file.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Move formating of spice listenAddr to the section of code
where spice ports are formatted. It is more logical to
format address and ports together. Account for the change
in spice cfg test file by moving 'spicehost'.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Replace more than 30 ad-hoc error messages with a single, generic one
that contains the name of the option being processed and some hints
to help the user understand what could have gone wrong.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1207043
Test the support for enabling/disabling CPACF protected key management
operations for a guest.
Signed-off-by: Tony Krowiak <akrowiak@linux.vnet.ibm.com>
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We have previously effectively ignored all <controller type='ide'>
elements in a domain definition.
On the i440fx-based machinetypes there is an IDE controller that is
included in the chipset and can't be removed (which is the ide
controller with index='0'>), so it makes sense to ignore that one
controller. However, if an i440fx domain definition has a 2nd
controller, nothing catches this error (unless you also have a disk
attached to it, in which case qemu will complain that you're trying to
use the ide controller named "ide1", which doesn't exist), and if any
other type of domain has even a single controller defined, it will be
incorrectly ignored.
Ignoring a bogus controller definition isn't such a big problem, as
long as an error is logged when any disk is attached to that
non-existent controller. But in the case of q35-based machinetypes,
the hardcoded id ("alias" in libvirt terms) of its builtin SATA
controller is "ide", which happens to be the same id as the builtin
IDE controller on i440fx machinetypes. So libvirt creates a
commandline believing that it is connecting the disk to the builtin
(but actually nonexistent) IDE controller, qemu thinks that libvirt
wanted that disk connected to the builtin SATA controller, and
everybody is happy.
Until you try to connect a 2nd disk to the IDE controller. Then qemu
will complain that you're trying to set unit=1 on a controller that
requires unit=0 (SATA controllers are organized differently than IDE
controllers).
After this patch, if a domain has an IDE controller defined for a
machinetype that has no IDE controllers, libvirt will log an error
about the controller itself as it is building the qemu commandline
(rather than a (possible) error from qemu about disks attached to that
controller). This is done by adding IDE to the list of controller
types that are handled in the loop that creates controller command
strings in qemuBuildCommandline() (previously it would *always* skip
IDE controllers). Then qemuBuildControllerDevStr() is modified to log
an appropriate error in the case of IDE controllers.
In the future, if we add support for extra IDE controllers (piix3-ide
and/or piix4-ide) we can just add it into the IDE case in
qemuBuildControllerDevStr(). For now, nobody seems anxious to add
extra support for an aging and very slow controller, when there are so
many better options available.
Resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=1176071 (Fedora)
Back in 2013, commit 877bc089 added in some tests that made sure no
error was generated on a domain definition that had an automatically
added usb controller if that domain didn't have a PCI bus to attach
the usb controller to. This was done because, at that time, libvirt
was automatically adding a usb controller to *any* domain definition
that didn't have one. Along with permitting the controller, two
s390-specific tests were added to ensure this behavior was maintained
- one with <controller type='usb' model='none'/> and another (called
"s390-piix-controllers") that had both usb and ide controllers, but
nothing attached to them.
Then in February of this year, commit 09ab9dcc eliminated the annoying
auto-adding of a usb device for s390 and s390x machines, stating:
"Since s390 does not support usb the default creation of a usb
controller for a domain should not occur."
Although, as verified here, the s390 doesn't support usb, and usb
controllers aren't currently added to s390 domain definitions
automatically, there are likely still some domain definitions in the
wild that have a usb controller (which was added *by libvirt*, not by
the user), so we will keep the tests verifying that behavior for
now. But this patch changes the names of the tests to reflect that
they don't actually contain a valid s390 config; this way future
developers won't propagate the incorrect idea that an s390 virtual
machine can have a USB (or IDE) bus.
In the case of the IDE controller, though, libvirt has never
automatically added an IDE controller unless a user added an IDE disk
(which itself would have caused an error), and we specifically *do*
want to begin generating an error when someone tries to add an IDE
controller to a domain that can't support one. For that reason, while
renaming the sz390-piix-controllers patch, this patch removes the
<controller type='ide'...> from it (otherwise the upcoming patch would
break make check)
This makes sure that that the commandlines generated for devices and
controller devices are all using the alias that has been set in the
controller's object as the id of the controller, rather than
hardcoding a printf (or worse, encoding exceptions to the standard
${controller}${index} into the logic)
Since this "fixes" the controller name used for the sata controller,
the commandline arg for the sata controller in the sata test case had
to be adjusted to be "sata0" instead of "ahci0". All other tests
remain unchanged, verifying that the patch causes no other functional
change.
Because the function that finds a controller alias based on a device
def requires a pointer to the full domainDef in order to get the list
of controllers, the arglist of a few functions had to have this added.
gcc5 reports an error like this:
bhyvexml2argvtest.c: In function 'testCompareXMLToArgvFiles':
bhyvexml2argvtest.c:24:18: error: variable 'vm' set but not used
[-Werror=unused-but-set-variable]
virDomainObj vm;
^
cc1: all warnings being treated as errors
Fix by dropping this variable.
My commit 747761a79 (v1.2.15 only) dropped this bit of logic when filling
in a default arch in the XML:
- /* First try to find one matching host arch */
- for (i = 0; i < caps->nguests; i++) {
- if (caps->guests[i]->ostype == ostype) {
- for (j = 0; j < caps->guests[i]->arch.ndomains; j++) {
- if (caps->guests[i]->arch.domains[j]->type == domain &&
- caps->guests[i]->arch.id == caps->host.arch)
- return caps->guests[i]->arch.id;
- }
- }
- }
That attempt to match host.arch is important, otherwise we end up
defaulting to i686 on x86_64 host for KVM, which is not intended.
Duplicate it in the centralized CapsLookup function.
Additionally add some testcases that would have caught this.
https://bugzilla.redhat.com/show_bug.cgi?id=1219191
My commit 7b9de914 added some aarch64 CPU test cases. I wanted to test
two different code paths but inadvertently added two of the same test
cases.
The second code path (using <cpu><model>host</model</cpu>) isn't easily
exercised via the qemu tests anyways, I'll need to look elsewhere.
Regardless, remove the redundant tests for now
The only version that's supported in QEMU is version 2, currently.
Fortunately, it is enabled by aarch64 automatically, so there's
nothing for us that needs to be put onto command line.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The phyp driver stuffed it into a DomainDefPtr during its attachdevice
routine, but the value is never advertised via capabilities so it should
be safe to drop.
Have the phyp driver use OSTYPE_LINUX, which is what it advertises via
capabilities.
The free callback should be qemuMonitorChardevInfoFree rather
than just 'free' when virHashCreate'ing the chardevInfo hash.
==29959== 24 bytes in 2 blocks are definitely lost in loss record 19 of 53
==29959== at 0x4C29F80: malloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==29959== by 0xB95C679: strdup (in /lib64/libc-2.20.so)
==29959== by 0x63C6546: virStrdup (virstring.c:709)
==29959== by 0x4805ED: qemuMonitorJSONExtractChardevInfo (qemu_monitor_json.c:3429)
==29959== by 0x4807A5: qemuMonitorJSONGetChardevInfo (qemu_monitor_json.c:3479)
==29959== by 0x434AEC: testQemuMonitorJSONqemuMonitorJSONGetChardevInfo (qemumonitorjsontest.c:1824)
==29959== by 0x436F2F: virtTestRun (testutils.c:211)
==29959== by 0x436932: mymain (qemumonitorjsontest.c:2404)
==29959== by 0x4382EA: virtTestMain (testutils.c:863)
==29959== by 0x436B27: main (qemumonitorjsontest.c:2423)
Signed-off-by: Zhang Bo <oscar.zhangbo@huawei.com>
Signed-off-by: Zhou Yimin <zhouyimin@huawei.com>
Rather than have a separate routine to parse the alias of an iothread
returned from qemu in order to get the iothread_id value, parse the alias
when returning and just return the iothread_id in qemuMonitorIOThreadInfoPtr
This set of patches removes the function, changes the "char *name" to
"unsigned int" and handles all the fallout.
Commit ca329299 added a utility function virtTestCompareFiles() to
eliminate repetitive code in several test programs. It unfortunately
calls virtTestDifference() with the arguments in the wrong order -
strcontent is the "actual" output gathered by the test rig, while
filecontent is the "expected", and virtTestDifference() wants expected
(filecontent) followed by actual (strcontent), but
virtTestCompareFiles() does the opposite, which can make the output a
bit confusing when there is a failure.
With iothreadid's allowing any 'id' value for an iothread_id, the
iothreadsched code needs a slight adjustment to allow for "any"
unsigned int value in order to create the bitmap of ids that will
have scheduler adjustments. Adjusted the doc description as well.
Remove the iothreadspin array from cputune and replace with a cpumask
to be stored in the iothreadids list.
Adjust the test output because our printing goes in order of the iothreadids
list now.
Add 'thread_id' to the virDomainIOThreadIDDef as a means to store the
'thread_id' as returned from the live qemu monitor data.
Remove the iothreadpids list from _qemuDomainObjPrivate and replace with
the new iothreadids 'thread_id' element.
Rather than use the default numbering scheme of 1..number of iothreads
defined for the domain, use the iothreadid's list for the iothread_id
Since iothreadids list keeps track of the iothread_id's, these are
now used in place of the many places where a for loop would "know"
that the ID was "+ 1" from the array element.
The new tests ensure usage of the <iothreadid> values for an exact number
of iothreads and the usage of a smaller number of <iothreadid> values than
iothreads that exist (and usage of the default numbering scheme).
All the libraries use same parameters when building, why not have it in
one place at the begining of the Makefile.
This will also ensure no new mock library will have a problem with
missing e.g. MINGW_EXTRA_LDFLAGS.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
In a lot places we use path like this:
$(srcdir)/../src/....
when in fact it can be:
$(top_srcdir)/src/
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
- Make sure aarch64 host-passthrough works correctly
- Make sure libvirt doesn't choke on cpu model=host, which is what
virt-install/virt-manager were incorrectly specifying up until recently.
If this enviroment variable is set, the virTestCompareToFile helper
will overwrite the file content we are comparing against, if the
file doesn't exist or it doesn't match the expected input.
This is useful when adding new test cases, or making changes that
generate a lot of output churn.
The PortNumber data type is declared to derive from 'short'.
Unfortunately this is an signed type, so validates the range
[-32,768, 32,767] which excludes valid port numbers between
32767 and 65535.
We can't use 'unsignedShort', since we need -1 to be a valid
port number too.
This change is to use 'int' and set an explicit max boundary
instead of relying on the data types' built-in max.
One of the existing tests is changed to use a high port number
to validate the schema.
https://bugzilla.redhat.com/show_bug.cgi?id=1214664
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Commit 835cf84 dropped expectedVirtTypes argument for
virDomainDefParse*() functions, however bhyve tests still try to pass
that to virDomainDefParseFile(), therefore build fails.
Fix build by fixing virDomainDefParseFile() usage.
When building without lxc support enabled, build fails with:
CLD vircapstest
vircapstest.o: In function `test_virCapsDomainDataLookupLXC':
vircapstest.c:(.text+0x9ef): undefined reference to `testLXCCapsInit'
Fix that by hiding LXC tests under appropriate #ifdef. Same applies
for QEMU and XEN.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This needs to specified in way too many places for a simple validation
check. The ostype/arch/virttype validation checks later in
DomainDefParseXML should catch most of the cases that this was covering.
This revealed that GuestDefaultEmulator was a bit buggy, capable
of returning an emulator that didn't match the passed domain type. Fix
up the test suite input to continue to pass.
This is a helper function to look up all capabilities data for all
the OS bits that are relevant to <domain>. This is
- os type
- arch
- domain type
- emulator
- machine type
This will be used to replace several functions in later commits.
According to docs, using 'lun' as a value for device attribute is only valid
with disk types 'block' and 'network'. However current RNG schema also allows
a combination type='file' device='lun' which results in a successfull
xml validation, but fails at qemuBuildCommandLine.
Besides fixing the RNG schema, this patch also adds a qemuxml2argvtest
for this case.
https://bugzilla.redhat.com/show_bug.cgi?id=1210669
Currently, when constructing traffic shaping rules, the ingress
filter is created without any priority specified on the command
line. This makes kernel to make up one. While this works, it
simplifies things a bit if we provide the filter priority. In
this case, since it's the root filter lets give it the highest
priority of number 1.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add support for HVM direct kernel boot in libxl. Also add a
test to verify domXML <-> native conversions.
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
In xl config, hvmloader is implied for hvm guests. It is not
specified with the "kernel" option like xm config. The "kernel"
option, along with "ramdisk" and "extra", is used for HVM direct
kernel boot. Instead of using "kernel" option to populate
virDomainDef object's os.loader->path, use hvmloader discovered
when gathering capabilities.
This change required fixing initialization of capabilities in
the test utils and removing 'kernel = "/usr/lib/xen/boot/hvmloader"'
from the test config files.
xl and xm differ a bit in how <os> configuration is represented.
E.g. xl config supports <os><nvram .../></os> via its "bios"
setting.
Move the xenParseOS and xenFormatOS functions from xen_common.c
and copy to xen_xl.c and xen_xm.c so they can be customized for
xm vs xl config. An unfortunate fallout is reordering of entries
in the test config files.
The <inbound/> element to <bandwidth/> has several attributes from
which two are mandatory. Well, from two at least one has to be
present: @average or @floor or both. Instead of inventing crazy RNG
schema, let's make all the attributes optional there and rely on our
parsing code to correctly handle the situation.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
gcc 4.1.2 (hello RHEL 5) on 32-bit platforms complains:
vircgrouptest.c: In function 'testCgroupGetPercpuStats':
vircgrouptest.c:627: warning: integer constant is too large for 'long' type
vircgrouptest.c:628: warning: this decimal constant is unsigned only in ISO C90
vircgrouptest.c:634: warning: integer constant is too large for 'long' type
vircgrouptest.c:635: warning: this decimal constant is unsigned only in ISO C90
vircgrouptest.c:636: warning: this decimal constant is unsigned only in ISO C90
vircgrouptest.c:644: warning: integer constant is too large for 'long' type
* tests/vircgrouptest.c (testCgroupGetPercpuStats): Use ULL suffix.
Signed-off-by: Eric Blake <eblake@redhat.com>
Add virStringHasControlChars that checks if the string has
any control characters other than \t\r\n,
and virStringStripControlChars that removes them in-place.
In one of my previous commits (49ed6cff9) I've introduced a test
among with some files stored under virnetdevtestdata folder.
While this works perfectly within a git tree, the folder was not
getting into .tar.gz and therefore the dist-check would fail.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This patch adds checks for empty bitmaps right after the calls of
virBitmapParse. These only include spots where set API's are called and
where domain's XML is parsed.
Also, it partially reverts commit 983f5a which added a check for
invalid nodeset "0,^0" into virBitmapParse function. This change broke
the logic, as an empty bitmap should not cause an error.
https://bugzilla.redhat.com/show_bug.cgi?id=1210545
rfc3986 states that the separator in URI path is a single slash.
Multiple slashes may potentially lead to different resources and thus we
should not remove them.
This new internal API checks if given CGroup controller is
available. It is going to be needed later when we need to make a
decision whether pin domain memory onto NUMA nodes using cpuset
CGroup controller or using numa_set_membind().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit cd5dc30 added this test, but it fails if
LIBXL_HAVE_BUILDINFO_USBDEVICE_LIST is not defined:
6) Xen XM-2-XML Format fullvirt-multiusb
... libvirt: error : unsupported configuration: multiple USB
devices not supported
FAILED
Instead of always using controller 0 and incrementing port number,
respect the maximum port numbers of controllers and use all of them.
Ports for virtio consoles are quietly reserved, but not formatted
(neither in XML nor on QEMU command line).
Also rejects duplicate virtio-serial addresses.
https://bugzilla.redhat.com/show_bug.cgi?id=890606https://bugzilla.redhat.com/show_bug.cgi?id=1076708
Test changes:
* virtio-auto.args
Filling out the port when just the controller is specified.
switched from using
maxport + 1
to:
first free port on the controller
* virtio-autoassign.args
Filling out the address when no <address> is specified.
Started using all the controllers instead of 0, also discards
the bus value.
* xml -> xml output of virtio-auto
The port assignment is no longer done as a part of XML parsing,
so the unspecified values stay 0.
The 7c3c7f217e and f5c2d6 commits introduced a nodeinfo test.
In order to do that, some parts of sysfs had to be copied.
However, sysfs is full of symlinks, so during copying some
symlinks broke. Remove them, as on different systems they can
point to different files or be broken. At the same time, we don't
need all files added in those commits. For instance we don't care
about 'uevent' files, 'power' folders, and others.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In the order of appearance:
* MAX_LISTEN - never used
added by 23ad665c (qemud) and addec57 (lock daemon)
* NEXT_FREE_CLASS_ID - never used, added by 07d1b6b
* virLockError - never used, added by eb8268a4
* OPENVZ_MAX_ARG, CMDBUF_LEN, CMDOP_LEN
unused since the removal of ADD_ARG_LIT in d8b31306
* QEMU_NB_PER_CPU_STAT_PARAM - unused since 897808e
* QEMU_CMD_PROMPT, QEMU_PASSWD_PROMPT - unused since 1dc10a7
* TEST_MODEL_WORDSIZE - unused since c25c18f7
* TEMPDIR - never used, added by 714bef5
* NSIG - workaround around old headers
added by commit 60ed1d2
unused since virExec was moved by commit 02e8691
* DO_TEST_PARSE - never used, added by 9afa006
* DIFF_MSEC, GETTIMEOFDAY - unused since eee6eb6
We need to mock virFileExists to return true for "/dev/kvm" because the
test should not depend on host system.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
On IRC, Hydrar pointed a problem where 'virsh edit' failed on
his domain created through an ISCSI pool managed by virt-manager,
all because the XML included a block device with colons in the
name.
* docs/schemas/basictypes.rng (absFilePath): Add colon as safe.
* tests/qemuxml2argvdata/qemuxml2argv-disk-iscsi.xml: New file.
* tests/qemuxml2argvdata/qemuxml2argv-disk-iscsi.args: Likewise.
* tests/qemuxml2argvtest.c (mymain): Test it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Starting a qemu VM with a memory module that has the base address
specified results in the following error:
error: internal error: early end of file from monitor: possible problem:
2015-03-26T03:45:52.338891Z qemu-kvm: -device pc-dimm,node=0,memdev=memdimm0,
id=dimm0,slot=0,base=4294967296: Property '.base' not found
The correct property name for the base address is 'addr'.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
QEMU 2.3 adds these new models to cover Haswell and Broadwell CPUs with
updated microcode. Luckily, they also reverted former the machine type
specific changes to existing models. And since these changes were never
released, we don't need to hack around them in libvirt.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Recently we've fixed a bug where the status XML could not be parsed as
the parser used absolute path XPath queries. This test enhancement tests
all XML files used in the qemu-xml-2-xml test as a part of a status XML
snippet to see whether they are parsed correctly. The status XML-2-XML is
currently tested in 223 cases with this patch.
The current auto-indentation buffer code applies indentation only on
complete strings. To allow adding a string containing newlines and
having it properly indented this patch adds virBufferAddStr.
To allow adding more tests, refactor the XML-2-XML test so that the
files are not reloaded always and clarify the control flow.
Result of this changes is that the active and inactive portions of the
XML are tested in separate steps rather than one test step.
Function virQEMUCapsInitGuestFromBinary detect kvm support by testing
whether /dev/kvm exists or whether we pass path to kvmbin. Provide the
path we are testing via kvmbin for testing purpose instead of detecting
presence of /dev/kvm to successfully run the tests on all hosts.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Commit 2360fe5d updated formating of <domain> element but forgot to
update qemucaps2xmldata xml files. In addition the test code was broken
too. Update the xml files and return -1 if testCompareXMLToXML fails
together with indentation fix.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Add support to start qemu instance with 'pc-dimm' device. Thanks to the
refactors we are able to reuse the existing function to determine the
parameters.
This patch adds code that parses and formats configuration for memory
devices.
A simple configuration would be:
<memory model='dimm'>
<target>
<size unit='KiB'>524287</size>
<node>0</node>
</target>
</memory>
A complete configuration of a memory device:
<memory model='dimm'>
<source>
<pagesize unit='KiB'>4096</pagesize>
<nodemask>1-3</nodemask>
</source>
<target>
<size unit='KiB'>524287</size>
<node>1</node>
</target>
</memory>
This patch preemptively forbids use of the <memory> device in individual
drivers so the users are warned right away that the device is not
supported.
To enable memory hotplug the maximum memory size and slot count need to
be specified. As qemu supports now other units than mebibytes when
specifying memory, use the new interface in this case.
Add a XML element that will allow to specify maximum supportable memory
and the count of memory slots to use with memory hotplug.
To avoid possible confusion and misuse of the new element this patch
also explicitly forbids the use of the maxMemory setting in individual
drivers's post parse callbacks. This limitation will be lifted when the
support is implemented.
Lets not give a bad example and check for return values of
virNetwork* APIs called within the test. Even though it's
unlikely that any API will fail, it can happen. We're connected
to the test driver after all, and our API sequence is correct. So
test driver should fail only in case of bug or OOM.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Midonet is an opensource virtual networking that over lays the IP
network between hypervisors. Currently, such networks can be made
with the openvswitch virtualport type.
This patch, defines the schema and documentation that will serve
as basis for the follow up patches that will add support to libvirt
for using Midonet virtual ports for its interfaces. The schema
definition requires that the port profile expresses its interfaceid
as part of the port profile. For that reason, this is part of the
patch too.
Signed-off-by: Antoni Segura Puimedon <toni+libvirt@midokura.com>
By querying the qemu guest agent with the QMP command
"guest-network-get-interfaces" and converting the received JSON
output to structured objects.
Although "ifconfig" is deprecated, IP aliases created by "ifconfig"
are supported by this API. The legacy syntax of an IP alias is:
"<ifname>:<alias-name>". Since we want all aliases to be clubbed
under parent interface, simply stripping ":<alias-name>" suffices.
Note that IP aliases formed by "ip" aren't visible to "ifconfig",
and aliases created by "ip" do not have any specific name. But
we are lucky, as qemu guest agent detects aliases created by both.
src/qemu/qemu_agent.h:
* Define qemuAgentGetInterfaces
src/qemu/qemu_agent.c:
* Implement qemuAgentGetInterface
src/qemu/qemu_driver.c:
* New function qemuGetDHCPInterfaces
* New function qemuDomainInterfaceAddresses
src/remote_protocol-sructs:
* Define new structs
tests/qemuagenttest.c:
* Add new test: testQemuAgentGetInterfaces
Test cases for IP aliases, 0 or multiple ipv4/ipv6 address(es)
Signed-off-by: Nehal J Wani <nehaljw.kkd1@gmail.com>
All the devices we have format their address as its last sub-element, so
let's change memballoon to follow suit. Also adjust RNG to allow any
order of them so 'virsh edit' doesn't shout at us.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Now that the size of guest's memory can be inferred from the NUMA
configuration (if present) make it optional to specify <memory>
explicitly.
To make sure that memory is specified add a check that some form of
memory size was specified. One side effect of this change is that it is
no longer possible to specify 0KiB as memory size for the VM, but I
don't think it would be any useful to do so. (I can imagine embedded
systems without memory, just registers, but that's far from what libvirt
is usually doing).
Forbidding 0 memory for guests also fixes a few corner cases where 0 was
not interpreted correctly and caused failures. (Arguments for numad when
using automatic placement, size of the balloon). This fixes problems
described in https://bugzilla.redhat.com/show_bug.cgi?id=1161461
Test case changes are added to verify that the schema change and code
behave correctly.
Use the NUMA total instead of the configured size both in XML and for
uses in the code once NUMA is enabled for a domain.
One test case change is necessary as the rounding of the individual cell
sizes was not matching the rounding of the total size.
In Xen>=4.3, libxl supports new syntax for USB devices:
usbdevice=[ "DEVICE", "DEVICE", ... ]
Add support for that in xenconfig driver. When only one device is
defined, keep using old syntax for backward compatibility.
Adjust tests for changed options order.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
So far it's just a structure which happens to have 'Obj' in its
name, but otherwise it not related to virObject at all. No
reference counting, not virObjectLock(), nothing.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Use the new single function instead of calling
qemuMonitorJSONGetBlockStatsInfo and
qemuMonitorJSONGetBlockStatsParamsNumber. This will allow to delete the
functions later while still maintaining coverage.
Add a different version of parser for "info blockstats" that basically
parses the same information as the existing copy of the function.
This will allow us to remove the single device version
qemuMonitorGetBlockStatsInfo in the future.
The new implementation uses few new helpers so it should be more
understandable and provides a test case to verify that it works.
qemu HMP commands sent by libvirt are terminated just by a '\r'. The
fake monitor used in tests wasn't prepared to handle this and the
communication would hang on an attempt to do a HMP conversation.
Add a special case for handling commands separated by \r in case HMP is
used.
Our code supports that for ages. When using a <filterref/> to an
<interface/> several parameters can be passed to the filter. Later,
when building firewall rules, parameters are substituted for their
values. However, our RNG schema allowed only one parameter to be
passed.
Reported-by: Brian Rak <brak@gameservers.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit 5aee81a0 introduced a new test for disk-serial. The test fails
on i686 arch because there is no need to add "-cpu qemu32" to command
line. To fix the test update emulator in XML to "/usr/bin/qemu" so we
don't add the "-cpu qemu32" to command while running the test on i686 or
x86_64 host.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
We don't usually do tests purely for one change, but one change was
special because when users will migrate to OVMF/AAVMF, commit 18f9f69b
makes their lives easier by allowing them to interleave <type/> inside
<os/>. It would be nice of us to keep the possibility of them pasting
the loader and nvram elements wherever it is valid, hence this test.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Commit 3e4b783e fixed an issue with RNG schema where this address type
was missing, this commit adds a test for it.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
We have something like pvpanic device. However, in some cases it does
not have any address assigned, in which case we produce this ugly XML
(still valid though):
<devices>
<emulator>/usr/bin/qemu</emulator>
...
<panic>
</panic>
</devices>
Lets format "<panic/>" instead.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There was a mess in the way how we store unlimited value for memory
limits and how we handled values provided by user. Internally there
were two possible ways how to store unlimited value: as 0 value or as
VIR_DOMAIN_MEMORY_PARAM_UNLIMITED. Because we chose to store memory
limits as unsigned long long, we cannot use -1 to represent unlimited.
It's much easier for us to say that everything greater than
VIR_DOMAIN_MEMORY_PARAM_UNLIMITED means unlimited and leave 0 as valid
value despite that it makes no sense to set limit to 0.
Remove unnecessary function virCompareLimitUlong. The update of test
is to prevent the 0 to be miss-used as unlimited in future.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1146539
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Since the APIs support just one element per namespace and while
modifying an element all duplicates would be removed, let's do this
right away in the post parse callback.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1190590
Adding functionality to libvirt that will allow it
query the ethtool interface for the availability
of certain NIC HW offload features
Here is an example of the feature XML definition:
<device>
<name>net_eth4_90_e2_ba_5e_a5_45</name>
<path>/sys/devices/pci0000:00/0000:00:03.0/0000:08:00.1/net/eth4</path>
<parent>pci_0000_08_00_1</parent>
<capability type='net'>
<interface>eth4</interface>
<address>90:e2:ba:5e:a5:45</address>
<link speed='10000' state='up'/>
<feature name='rx'/>
<feature name='tx'/>
<feature name='sg'/>
<feature name='tso'/>
<feature name='gso'/>
<feature name='gro'/>
<feature name='rxvlan'/>
<feature name='txvlan'/>
<feature name='rxhash'/>
<capability type='80203'/>
</capability>
</device>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
In commit edd1295e1d I've introduced an
XML element that allows to configure state of the network interface
link. Somehow the RNG schema hunk ended up in a weird place in the
network schema definition. Move it to the right place and add a test
case.
Note that the link state is set up via the monitor at VM startup so I
originally didn't think of adding a test case.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1173468
https://bugzilla.redhat.com/show_bug.cgi?id=1142631
This patch resolves a situation where the same "<target dev='$name'...>"
can be used for multiple disks in the domain.
While the $name is "mostly" advisory regarding the expected order that
the disk is added to the domain and not guaranteed to map to the device
name in the guest OS, it still should be unique enough such that other
domblk* type operations can be performed.
Without the patch, the domblklist will list the same Target twice:
$ virsh domblklist $dom
Target Source
------------------------------------------------
sda /var/lib/libvirt/images/file.qcow2
sda /var/lib/libvirt/images/file.img
Additionally, getting domblkstat, domblkerror, domblkinfo, and other block*
type calls will not be able to reference the second target.
Fortunately, hotplug disallows adding a "third" sda value:
$ qemu-img create -f raw /var/lib/libvirt/images/file2.img 10M
$ virsh attach-disk $dom /var/lib/libvirt/images/file2.img sda
error: Failed to attach disk
error: operation failed: target sda already exists
$
BUT, it since 'sdb' doesn't exist one would get the following on the same
hotplug attempt, but changing to use 'sdb' instead of 'sda'
$ virsh attach-disk $dom /var/lib/libvirt/images/file2.img sdb
error: Failed to attach disk
error: internal error: unable to execute QEMU command 'device_add': Duplicate ID 'scsi0-0-1' for device
$
Since we cannot fix this issue at parsing time, the best that can be done so
as to not "lose" a domain is to make the check prior to starting the guest
with the results as follows:
$ virsh start $dom
error: Failed to start domain $dom
error: XML error: target 'sda' duplicated for disk sources '/var/lib/libvirt/images/file.qcow2' and '/var/lib/libvirt/images/file.img'
$
Running 'make check' found a few more instances in the tests where this
duplicated target dev value was being used. These also exhibited some
duplicated 'id=' values (negating the uniqueness argument of aliases) in
the corresponding .args file and of course the *xmlout version of a few
input XML files.
In virStorageVolCreateXML, add VIR_VOL_XML_PARSE_NO_CAPACITY
to the call parsing the XML of the new volume to make the capacity
optional.
If the capacity is omitted, use the capacity of the old volume.
We already do that for values that are less than the original
volume capacity.
