Currenty we only check files that end in .py, but we have at
least a couple of scripts that don't have that suffix and we
nonetheless want to keep compliant with the code style.
Extend the sc_flake8 syntax-check rule so that any file that
contains a Python 3 shebang is fed to flake8 too.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Specifically
E111 indentation is not a multiple of four
This commit is better viewed with 'git show -w'.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Unfortunately running Python scripts causes this directory to
be created in the *source* tree, and there doesn't seem to be
a way to prevent that from happening.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Since the string "ci" is already contained in the path, it
seems unnecessary to include it into the filename too: in fact,
we only do that for Dockerfiles and not for files in ci/cirrus,
even though those are generated the very same way.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Implement "<os firmware='efi'>" support for bhyve driver.
As there are not really lot of options, try to find
"BHYVE_UEFI.fd" firmware which is installed by the
sysutils/uefi-edk2-bhyve FreeBSD port.
If not found, just use the first found firmware
in the firmwares directory (which is configurable via
config file).
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When the backup job is terminated normally the security label is
restored by the blockjob finishing handler.
If the VM dies or is destroyed that wouldn't happen as the blockjob
handler wouldn't be called.
Restore the security label on disk store where we remember that the job
was running at the point when 'qemuBackupJobTerminate' was called.
Not resetting the security label means that we also leak the xattr
attributes remembering the label which prevents any further use of the
file, which is a problem for block devices.
This also requires that the call to 'qemuBackupJobTerminate' from
'qemuProcessStop' happens only after 'vm->pid' was reset as otherwise
the security subdrivers attempt to enter the process namespace which
fails if the process isn't running any more.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1939082
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
qemuBackupBegin can take a full backup of the disks (excluding any
operations with bitmaps) without the need to wait for the
blockdev-reopen support in qemu.
Add a check that no checkpoint creation is required and the disk backup
mode isn't VIR_DOMAIN_BACKUP_DISK_BACKUP_MODE_INCREMENTAL.
Call to virDomainBackupAlignDisks is moved earlier as it initializes the
disk backup mode if not present in user config.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Upcoming commit will enable full backup support (incremental part
requires blockdev-reopen, which won't happen in qemu for at least
another release).
Add a capability that the 'blockdev-backup' job is supported by qemu
capped, but limited to when qemu supports QEMU_CAPS_BLOCKDEV.
We can also use it in the expression to enable
QEMU_CAPS_INCREMENTAL_BACKUP since it's a pre-requisite too.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
As documented at [1], the common practice with respect to private
attributes/methods naming is to prefix them with an underscore.
[1] https://docs.python.org/3/tutorial/classes.html#private-variables
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This function checks whether there are any stale Docker images in the
registry that can be purged. Since we're pulling available container
images from our GitLab registry with the 'list-images' action, it
could happen that we'd list old (already unsupported) images and make
them available for the user to consume and run a build in them.
Naturally, the build will most likely fail leaving the user confused.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The corresponding Bash script is dropped.
After this patch's rewrite, the Makefile's original image listing
target remains intact only to notify the user to use the Python helper
instead.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
With the gradual rewrite of the Makefile to the 'helper' script will
require helper functions that would better live in a separate util
module.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Offer an option to silence all output to stdout coming out of the
dockerfiles/varsfiles generating code.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This help formatter class reports the defaults we use for options
taking an argument.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
When the firmware auto-selection was introduced it always picked first
usable firmware based on the JSON descriptions on the host. It is
possible to add/remove/change the JSON files but it will always be for
the whole host.
This patch introduces support for configuring the auto-selection per VM
by adding users an option to limit what features they would like to have
available in the firmware.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The original code used a lot of conditions and was not that obvious
when each XML bits are parsed.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The original text was not explaining what this attribute actually
controls and could have been interpreted as a control switch for the
Secure boot feature in firmwares.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Kashyap Chamarthy <kchamart@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
With this, XML fails if non-virtio video devices have virtio
options. Previously it didn't raise error.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1922093
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Move this function in order to use it in the next patch before
its previous declaration.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Currently, virDomainDeviceInfoParseXML() uses node->children
evaluation which is too verbose. Use XPath evaluation which is
nicer.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Function virDomainDeviceInfoParseXML() will need it soon, because it
will be doing XPath evaluation.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If libvirtd is terminated before the node driver finishes
initialization, it can crash with a backtrace similar to the following:
Stack trace of thread 1922933:
#0 0x00007f8515178774 g_hash_table_find (libglib-2.0.so.0)
#1 0x00007f851593ea98 virHashSearch (libvirt.so.0)
#2 0x00007f8515a1dd83 virNodeDeviceObjListSearch (libvirt.so.0)
#3 0x00007f84cceb40a1 udevAddOneDevice (libvirt_driver_nodedev.so)
#4 0x00007f84cceb5fae nodeStateInitializeEnumerate (libvirt_driver_nodedev.so)
#5 0x00007f85159840cb virThreadHelper (libvirt.so.0)
#6 0x00007f8511c7d14a start_thread (libpthread.so.0)
#7 0x00007f851442bdb3 __clone (libc.so.6)
Stack trace of thread 1922863:
#0 0x00007f851442651d syscall (libc.so.6)
#1 0x00007f85159842d4 virThreadSelfID (libvirt.so.0)
#2 0x00007f851594e240 virLogFormatString (libvirt.so.0)
#3 0x00007f851596635d vir_object_finalize (libvirt.so.0)
#4 0x00007f8514efe8e9 g_object_unref (libgobject-2.0.so.0)
#5 0x00007f85159667f8 virObjectUnref (libvirt.so.0)
#6 0x00007f851517755f g_hash_table_remove_all_nodes.part.0 (libglib-2.0.so.0)
#7 0x00007f8515177e62 g_hash_table_unref (libglib-2.0.so.0)
#8 0x00007f851596637e vir_object_finalize (libvirt.so.0)
#9 0x00007f8514efe8e9 g_object_unref (libgobject-2.0.so.0)
#10 0x00007f85159667f8 virObjectUnref (libvirt.so.0)
#11 0x00007f84cceb2b42 nodeStateCleanup (libvirt_driver_nodedev.so)
#12 0x00007f8515b37950 virStateCleanup (libvirt.so.0)
#13 0x00005648085348e8 main (libvirtd)
#14 0x00007f8514352493 __libc_start_main (libc.so.6)
#15 0x00005648085350fe _start (libvirtd)
This is because the initial population of the device list is done in a
separate initialization thread. If we attempt to exit libvirtd before
this init thread has completed, we'll try to free the device list while
accessing it from the other thread. In order to guarantee that this
init thread is not accessing the device list when we're cleaning up the
nodedev driver, make it joinable and wait for it to finish before
proceding with the cleanup. This is similar to how we handle the udev
event handler thread.
The separate initialization thread was added in commit
9f0ae0b1.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1836865
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Previously, if xml node passed to the virXMLNodeContentString()
was not of type XML_ELEMENT_NODE, @ret could have caused a memory
leak because xmlNodeGetContent() works for other types of nodes
as well.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Hao Wang <wanghao232@huawei.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Introduce command 'virsh domstats --dirtyrate' for reporting memory
dirty rate information. The info is listed as:
Domain: 'vm0'
dirtyrate.calc_status=2
dirtyrate.calc_start_time=1534523
dirtyrate.calc_period=1
dirtyrate.megabytes_per_second=5
Signed-off-by: Hao Wang <wanghao232@huawei.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Extend dirtyrate statistics for domGetStats to display the information
of a domain's memory dirty rate produced by domainStartDirtyRateCalc.
Signed-off-by: Hao Wang <wanghao232@huawei.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Introduce virDomainStartDirtyRateCalc API for start calculation of
a domain's memory dirty rate with a specified time.
Signed-off-by: Hao Wang <wanghao232@huawei.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit fcdc387410 used a libxl API which
is only available since Xen 4.8.
Due to lack of a specific guard for this API change, reuse another
guard from libxl.h.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
We don't need to go to the trouble of telling users about existance of
insecure SASL mechanisms only to then say that they shouldn't be used.
We should only tell people about the GSSAPI mechanism for TCP sockets.
For the SCRAM mechanism we should be telling people about the SHA256
variant only, and also warning that the password database stores the
passwords in clear text.
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
If running libvirtd via systemd, it gets a 64 MB memlock limit, but if
running from the shell it will only get 64 KB on a Fedora 33 system.
The latter low limit causes any attempt to use BPF to fail and it is
not obvious why.
This improves the error message thus:
# virsh -c lxc:/// start sh
error: Failed to start domain 'sh'
error: internal error: guest failed to start: Failure in libvirt_lxc startup: failed to initialize device BPF map; locked memory limit for libvirtd probably needs to be raised: Operation not permitted
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The g_idle_add function adds a callback to the primary GMainContext.
To workaround the GSource unref bugs, we need to add our callbacks
to the GMainContext that is associated with the GSource being
unref'd. Thus code using the per-VM virEventThread must use its
private GMainContext.
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Give guidance on how to check minimum meson version for a given package.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/140
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Somehow, command argument was not printed into debug logs. It is
imperative that all arguments are logged.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When connecting to the monitor, a timeout is calculated that is
bigger the more memory guest has (because QEMU has to allocate
and possibly zero out the memory and what not, empirically
deducted). However, when computing the timeout the @total_memory
mmember is accessed directly even though
virDomainDefGetMemoryTotal() should have been used.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We don't like virXXXPtr typedefs really and they are going away
shortly, possibly. Do not encourage new code to put in the
typedefs.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
