This patch introduces a new PCI hostdev address type called
'unassigned'. This new type gives users the option to add
PCI hostdevs to the domain XML in an 'unassigned' state, meaning
that the device exists in the domain, is managed by Libvirt
like any regular PCI hostdev, but the guest does not have
access to it.
This adds extra options for managing PCI device binding
inside Libvirt, for example, making all the managed PCI hostdevs
declared in the domain XML to be detached from the host and bind
to the chosen driver and, at the same time, allowing just a
subset of these devices to be usable by the guest.
Next patch will use this new address type in the QEMU driver to
avoid adding unassigned devices to the QEMU launch command line.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move the validation of vmcoreinfo from qemuBuildVMCoreInfoCommandLine()
to qemuDomainDefValidateFeatures(), allowing for validation
at domain define time.
qemuxml2xmltest.c was changed to account for this caps being
now validated at this earlier stage.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move smartcard validation being done by qemuBuildSmartcardCommandLine()
to the existing qemuDomainSmartcardDefValidate() function. This
function is called by qemuDomainDeviceDefValidate(), allowing smartcard
validation in domain define time.
Tests were adapted to consider the new caps being needed in
this earlier stage.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move the NVDIMM validation from qemuBuildMachineCommandLine()
to a new function in qemu_domain.c, qemuDomainDeviceDefValidateMemory(),
which is called by qemuDomainDeviceDefValidate(). This allows
NVDIMM validation to occur in domain define time.
It also increments memory hotplug validation, which can be seen
by the failures in the hotplug tests in qemuxml2xmltest.c that
needed to be adjusted after the move.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
In testXLInitDriver() a dummy driver structure is filled and it
is freed later in testXLFreeDriver(). However, it is sufficient
to unref just driver->config because that results in
libxlDriverConfigDispose() being called which unrefs
driver->config->caps. There is no need to unref it again in
testXLFreeDriver() - in fact it's undesired.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
When generating domain capabilities, we need to fake host CPU to
get reproducible result. We do this by copying a pre-existent CPU
config and setting VIR_TEST_MOCK_FAKE_HOST_CPU env variable which
is then consumed by qemucpumock. However, we forget to free the
CPU copy afterwards.
2,196 (2,016 direct, 180 indirect) bytes in 18 blocks are definitely lost in loss record 291 of 297
at 0x4838B86: calloc (vg_replace_malloc.c:762)
by 0x57CB6A0: g_malloc0 (in /usr/lib64/libglib-2.0.so.0.6000.7)
by 0x4A0F72D: virCPUDefNew (cpu_conf.c:87)
by 0x4A0FAC7: virCPUDefCopyWithoutModel (cpu_conf.c:235)
by 0x4A0FBBE: virCPUDefCopy (cpu_conf.c:273)
by 0x10E3C0: testUtilsHostCpusGetDefForArch (testutilshostcpus.h:157)
by 0x10E3C0: fakeHostCPU (domaincapstest.c:61)
by 0x10E3C0: fillQemuCaps (domaincapstest.c:86)
by 0x10E3C0: test_virDomainCapsFormat (domaincapstest.c:234)
by 0x10F4BC: virTestRun (testutils.c:146)
by 0x10DE93: doTestQemuInternal (domaincapstest.c:301)
by 0x10E13D: doTestQemu (domaincapstest.c:332)
by 0x1124CF: testQemuCapsIterate (testutilsqemu.c:635)
by 0x10DCE3: mymain (domaincapstest.c:435)
by 0x10FD8B: virTestMain (testutils.c:916)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Assuming that the backing image format is raw is wrong when doing image
detection:
1) In -drive mode qemu will still probe the image format of the backing
image. This means it will try to open a backing file of the image
which will fail if a more advanced security model is in use.
2) In blockdev mode the image will be opened as raw actually which is
wrong since it might be qcow. Not opening the backing images will
also end up in the guest seeing corrupted data.
Rather than attempt to solve various corner cases when us assuming the
storage file being raw and actually being right forbid startup when the
guest image doesn't have the format specified in the metadata.
https://bugzilla.redhat.com/show_bug.cgi?id=1588373
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
EXP_WARN and ALLOW_PROBE flags for the testStorageChain cases are no
longer used so we can remove them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Pass in 'true' as '@report_broken' of virStorageFileGetMetadata to make
it fail in the tests. The most important code paths (when starting the
VM) expect this function to fail rather than silently return partial
data. Switch the test to exercise this more important code path.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
With NVMe disks, one can start a blockjob with a NVMe disk
that is not visible in domain XML (at least right away). Usually,
it's fairly easy to override this limitation of
qemuDomainGetMemLockLimitBytes() - for instance for hostdevs we
temporarily add the device to domain def, let the function
calculate the limit and then remove the device. But it's not so
easy with virStorageSourcePtr - in some cases they don't
necessarily are attached to a disk. And even if they are it's
done later in the process and frankly, I find it too complicated
to be able to use the simple trick we use with hostdevs.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Now, that we have everything prepared, we can generate command
line for NVMe disks.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
This capability tracks if qemu is capable of:
-drive file.driver=nvme
The feature was added in QEMU's commit of v2.12.0-rc0~104^2~2.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
The device configs (which are actually the same one config)
come from a NVMe disk of mine.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
To simplify implementation, some restrictions are added. For
instance, an NVMe disk can't go to any bus but virtio and has to
be type of 'disk' and can't have startupPolicy set.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
There is this class of PCI devices that act like disks: NVMe.
Therefore, they are both PCI devices and disks. While we already
have <hostdev/> (and can assign a NVMe device to a domain
successfully) we don't have disk representation. There are three
problems with PCI assignment in case of a NVMe device:
1) domains with <hostdev/> can't be migrated
2) NVMe device is assigned whole, there's no way to assign only a
namespace
3) Because hypervisors see <hostdev/> they don't put block layer
on top of it - users don't get all the fancy features like
snapshots
NVMe namespaces are way of splitting one continuous NVDIMM memory
into smaller ones, effectively creating smaller NVMe-s (which can
then be partitioned, LVMed, etc.)
Because of all of this the following XML was chosen to model a
NVMe device:
<disk type='nvme' device='disk'>
<driver name='qemu' type='raw'/>
<source type='pci' managed='yes' namespace='1'>
<address domain='0x0000' bus='0x01' slot='0x00' function='0x0'/>
</source>
<target dev='vda' bus='virtio'/>
</disk>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
qemuBuildSoundCodecStr() validates if a given QEMU binary
supports the sound codec. This validation can be moved to
qemu_domain.c to be executed in domain define time.
The codec validation was moved to the existing
qemuDomainDeviceDefValidateSound() function.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move QEMU caps validation of QEMU_CAPS_OBJECT_USB_AUDIO and
QEMU_CAPS_DEVICE_ICH9_INTEL_HDA to a new function in qemu_domain.c,
qemuDomainDeviceDefValidateSound(). This function is called by
qemuDomainDeviceDefValidate() to validate the sound device
in domain define time.
qemuxml2xmltest.c was adjusted to add the now required caps for
domain definition.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move the SPICE caps validation from qemuBuildGraphicsSPICECommandLine()
to a new function called qemuDomainDeviceDefValidateSPICEGraphics().
This function is called by qemuDomainDeviceDefValidateGraphics(),
which in turn is called by qemuDomainDefValidate(), validating the graphics
parameters in domain define time.
This validation move exposed a flaw in the 'default-video-type' tests
for PPC64, AARCH64 and s390 archs. The XML was considering 'spice' as
the default video type, which isn't true for those architectures.
This was flying under the radar until now because the SPICE validation
was being made in 'virsh start' time, while the XML validation done in
qemuxml2xmltest.c considers define time.
All other tests were adapted to consider SPICE validation in this
earlier stage.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move the VNC cap validation from qemuBuildGraphicsVNCCommandLine()
to qemuDomainDeviceDefValidateGraphics(). This function is called by
qemuDomainDefValidate(), validating the graphics parameters in domain
define time.
Tests were adapted to consider SDL validation in this earlier stage.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
There are validations for SDL, VNC, SPICE and EGL_HEADLESS
around several BuildGraphics*CommandLine in qemu_command.c. This
patch starts to move all of them to qemu_domain.c, inside the
existent qemuDomainDeviceDefValidateGraphics() function. This
function is called by qemuDomainDefValidate(), validating the
graphics parameters in domain define time.
In this patch we'll move the SDL validation code from
qemuBuildGraphicsSDLCommandLine(). Tests were adapted to consider
SDL validation in this earlier stage.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move the pcihole64 validation being done by
qemuBuildGlobalControllerCommandLine() to the existing function
qemuDomainDeviceDefValidateControllerPCI(), which provides
domain define time validation.
The existing pcihole64 validations in qemu_domain.c were replaced
by the ones moved from qemu_command.c. The reason is that they
are more specific, allowing VIR_DOMAIN_CONTROLLER_MODEL_PCI_ROOT
and VIR_DOMAIN_CONTROLLER_MODEL_PCIE_ROOT to have distinct validation,
with exclusive QEMU caps and machine types.
Tests were adapted to consider the new caps being needed in
this earlier stage.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move the boot validation being done by qemuBuildBootCommandLine()
to to a new qemuDomainDefValidateBoot() function. This new function
is called by qemuDomainDefValidate(), allowing boot validation in
domain define time.
Tests were adapted to consider the new caps being needed in
this earlier stage.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move the PM validation being done by qemuBuildPMCommandLine() to
to a new qemuDomainDefValidatePM() function. This new function
is called by qemuDomainDefValidate(), promoting PM validation in
domain define time.
Tests were adapted to consider the new caps being needed in
this earlier stage.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
@def->clock validation is done by qemuBuildClockCommandLine() and
qemuBuildClockArgStr(). This patch centralize the validation done
in both these functions to a new qemuDomainDefValidateClockTimers()
function. This new function is then called by qemuDomainDefValidate(),
promoting clock validation in domain define time.
Tests were adapted to consider the new caps being needed in
this earlier stage.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move QEMU caps validation of qemuBuildHostdevCommandLine() to
qemuDomainDeviceDefValidateHostdev() and qemuDomainMdevDefValidate(),
allowing them to be validated at domain define time.
Tests were adapted to consider the new caps being needed in
this earlier stage.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move QEMU caps validation of QEMU_CAPS_USB_HUB to a new function in
qemu_domain.c, qemuDomainDeviceDefValidateHub(). This function is
called by qemuDomainDeviceDefValidate() to validate the sound device
in domain define time.
qemuxml2xmltest.c was adjusted to add the now required caps for
domain definition.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
A new function qemuDomainDeviceDefValidateNVRAM() was created
to validate the NVRAM in domain define time. Unit test was
adjusted to account for the extra QEMU_CAPS_DEVICE_NVRAM required
during domain define.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
A new qemuDomainDefValidateNuma() function was created to host
all the QEMU caps validation being done inside qemuBuildNumaArgStr().
This new function is called by qemuDomainValidateCpuCount()
to allow NUMA validation in domain define time.
Tests were changed to account for the QEMU capabilities
that need to be present at domain define time.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
virQEMUCapsSupportsVmport() is now being called inside
qemuDomainDefValidateFeatures() for VIR_DOMAIN_FEATURE_VMPORT
feature.
qemuxml2xmltest.c was changed to account for this caps being
now validated at domain define time.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Introduce a new function called qemuDomainDefValidatePSeriesFeature()
that will center all the PSeries validation done in qemu_command.c.
qemuDomainDefValidatePSeriesFeature() is then called during domain
define time, in qemuDomainDefValidateFeatures().
qemuxml2argvtest.c is also changed to include all the caps that now
are being validated in define time.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Qemu commit e900135dcfb67 ("i386: Add CPUID bit for CLZERO and XSAVEERPTR")
adds support for CLZERO CPUID bit.
This commit extends support for this CPUID bit into libvirt.
Signed-off-by: Ani Sinha <ani.sinha@nutanix.com>
Message-Id: <1575371352-99055-1-git-send-email-ani.sinha@nutanix.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Following domain configuration changes create two memory bandwidth
monitors: one is monitoring the bandwidth consumed by vCPU 0,
another is for vCPU 5.
```
<cputune>
<memorytune vcpus='0-4'>
<node id='0' bandwidth='20'/>
<node id='1' bandwidth='30'/>
+ <monitor vcpus='0'/>
</memorytune>
+ <memorytune vcpus='5'>
+ <monitor vcpus='5'/>
+ </memorytune>
</cputune>
```
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Huaqiang <huaqiang.wang@intel.com>
Originally, inside <cputune/cachetune>, it requires the <cache> element to
be in the position before <monitor>, and following configuration is not
permitted by schema, but it is better to let it be valid.
<cputune>
<cachetune vcpus='0-1'>
<monitor level='3' vcpus='0-1'/>
^
|__ Not permitted originally because it is in the place
before <cache> element.
<cache id='0' level='3' type='both' size='3' unit='MiB'/>
<cache id='1' level='3' type='both' size='3' unit='MiB'/>
</cachetune>
...
</cputune>
And, let schema do more strict check by identifying following configuration to
be invalid, due to <cachetune> should contain at least one <cache> or <monitor>
element.
<cputune>
<cachetune vcpus='0-1'>
^
|__ a <cachetune> SHOULD contain at least one <cache> or <monitor>
</cachetune>
...
</cputune>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Huaqiang <huaqiang.wang@intel.com>
As of commit 2a00ef6e71 which
was released in v5.2.0, we require YAJL to build the QEMU driver.
Remove the checks from code that requires the QEMU driver
or checks that also check for WITH_QEMU.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add Hygon Dhyana CPU data test case related files.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Yingle Hou <houyingle@hygon.cn>
Add Hygon Dhyana CPU model to the processor model.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Yingle Hou <houyingle@hygon.cn>
Add test code which will crawl a fake internal list of checkpoints and
generate the list of bitmaps for merging to gather the final bitmap for
the backup.
The initial tests cover the basic case of all bitmaps being present in
the top layer of the backing chain.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Add test data gathered from a run of qemu after creating bitmaps and
snapshots together in various combinations.
The following sequence of commands was used to achieve the
configuration:
virsh checkpoint-create-as VM --name a
virsh snapshot-create-as VM --disk-only
virsh snapshot-create-as VM --disk-only
virsh checkpoint-create-as VM --name b
virsh checkpoint-create-as VM --name c
virsh snapshot-create-as VM --disk-only
virsh checkpoint-create-as VM --name d
virsh snapshot-create-as VM --disk-only
virsh checkpoint-create-as VM --name current
Note that VM was restarted after these operations to allow renumbering
of the bitmaps in a more human-readable way.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The real data gathered for the 'basic' test case don't exercise some
fields. Add a copy with a few values modified manually.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Test the extraction of data about changed block tracking bitmaps. The
first test case adds a simple scenario of multiple bitmaps in one layer.
The test data will be also later reused for testing the code that
determines which bitmaps to merge for an incremental backup.
The sequence of bitmaps was created by the libvirt checkpoint API with
the following sequence of commands:
virsh checkpoint-create-as VM --name a
virsh checkpoint-create-as VM --name b
virsh checkpoint-create-as VM --name c
virsh checkpoint-create-as VM --name d
virsh checkpoint-create-as VM --name current
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Don't check os type / virt type / arch in the post-parse callback
because we can't assume qemuCaps is non-NULL at this point. It
also conceptually belongs to the validation callback.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The status XML represents a running VM, so we should always have an
ID present for the domain.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since blockcommit is asynchronous, libvirtd can be restarted while the
operation runs. To ensure the information necessary to finish up the job
is not lost, serialisation to and deserialisation from the status XML is
added.
To unittest this, the new element was only added to the active commit test,
the non-active commit test doesn't have the new element so as to test its
absence.
Signed-off-by: Pavel Mores <pmores@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Extend configure to pass the detect python binary to C code, and
use it in the test suite, rather than searching PATH
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
The path needs to be adjusted for the new script location
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Implement the transaction actions generator for blockdev-backup.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that the parser and formatter are in place we can exercise it on
the test files.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Prepare for new backup APIs by describing the XML that will represent
a backup. The XML resembles snapshots and checkpoints in being able
to select actions for a set of disks, but has other differences. It
can support both push model (the hypervisor does the backup directly
into the destination file) and pull model (the hypervisor exposes an
access port for a third party to grab what is necessary). Add
testsuite coverage for some minimal uses of the XML.
The <disk> element within <domainbackup> tries to model the same
elements as a <disk> under <domain>, but sharing the RNG grammar
proved to be hairy. That is in part because while <domain> use
<source> to describe a host resource in use by the guest, a backup job
is using a host resource that is not visible to the guest: a push
backup action is instead describing a <target> (which ultimately could
be a remote network resource, but for simplicity the RNG just
validates a local file for now), and a pull backup action is instead
describing a temporary local file <scratch> (which probably should not
be a remote resource). A future refactoring may thus introduce some
way to parameterize RNG to accept <disk type='FOO'>...</disk> so that
the name of the subelement can be <source> for domain, or <target> or
<scratch> as needed for backups. Future patches may improve this area
of code.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Old GCC isn't happy about the {0} initializer because the first
field in the struct is itself a struct.
../../tests/openvzutilstest.c: In function 'testReadNetworkConf':
../../tests/openvzutilstest.c:101:12: error: missing braces around initializer [-Werror=missing-braces]
struct openvz_driver driver = {0};
^
This fixes commit 4a4132b462
Signed-off-by: Daniel Berrange <berrange@localhost.localdomain>
Avoid grabbing the whole virCapsPtr object when we only need the
host CPU information.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Annoyingly there was no existing constructor, and identifying all the
places which do a VIR_ALLOC(cpu) is a bit error prone. Hopefully this
has found & converted them all.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Avoid grabbing the whole virCapsPtr object when we only need the
NUMA information.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The NUMA cells are stored directly in the virCapsHostPtr
struct. This moves them into their own struct allowing
them to be stored independantly of the rest of the host
capabilities. The change is used as an excuse to switch
the representation to use a GPtrArray too.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This parameter is now unused and can be removed entirely.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The QEMU impl of the callback can directly use the QEMU capabilities
cache to resolve the emulator binary name, allowing virCapsPtr to be
dropped.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Instead of using the virCapsPtr to get the default security model,
pass this in via the parser config.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently the disk and chardev seclabels are validated immediately at
the time their data is parsed. This forces the parser to fill in the
top level secmodel at time of parsing which is an undesirable thing.
This validation conceptually should be done in the post-parse phase
instead.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
To enable the virCapsPtr parameter to the post parse method to be
eliminated, the drivers must fetch the virCapsPtr from their own
driver via the opaque parameter, or use an alternative approach
to validate the parsed data.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Moving their instance parameter to be the first one, and give consistent
ordering of other parameters across all functions. Ensure that the xml
options are passed into both functions in prep for future work.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently the virQEMUCapsPtr objects are just empty. Future patches are
going to expect them to contain real data. Start off by populating the
machine types and arch information.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
As part of a goal to eliminate the need to use virCapsPtr for anything
other than the virConnectGetCapabilies() API impl, cache the host arch
against the QEMU driver struct and use that field directly.
In the tests we move virArchFromHost() globally in testutils.c so that
every test runs with a fixed default architecture reported.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The script needs two files to open:
$(builddir)/test_file_access.txt, and
$(srcdir)/file_access_whitelist.txt.
However, the script is opening the files from the $CWD which
won't work for a VPATH build. Make the script accept paths to the
files through @ARGV and tune the Makefile.am to pass them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
As part of a goal to eliminate Perl from libvirt build tools,
rewrite the test-wrap-argv.pl tool in Python.
This was a straight conversion, manually going line-by-line to
change the syntax from Perl to Python. Thus the overall structure
of the file and approach is the same.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
python2 will be end of life by the time of the next
libvirt release. All our supported build targets, including
CentOS7, have a python3 build available.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
If we static link to libvirt_util.la then we can't override functions in
this file by simply implementing them in the test code. Any tests should
dynamic link to the main libvirt.la and ensure symbols are exported.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The hard dependancy between the virt drivers and the network
or storage drivers was removed quite a while back now, so
the tests no longer need to link to these drivers.
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The 32-bit x86 binary is called qemu-system-i386, not
qemu-system-i686. This mistake across many test XML files was
not noticed because the mistake was also made in testutilsqemu.c
when mocking the capabilities.
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
On Fedora 31 with GCC 9.2.1, compiling qemuxml2argvtest takes
about 36 seconds since
commit 30c6d99209
Author: Jiri Denemark <jdenemar@redhat.com>
Date: Thu Oct 24 17:51:42 2019 +0200
qemuxml2argvtest: Update host arch for DO_TEST*ARCH* tests
The optimizer is hitting some pathological performance behaviour due to
the high number of branches in the mymain() method.
Pushing the branch tests down into the testCompareXMLToArgv method
brings the compile time down to 3 seconds.
This likely related to this GCC bug:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58479
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
To better track jobs we couldn't parse let's introduce a new job type
which will clarify semantics internally in few places.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
This also isn't required (due to the vportprofile being stored in the
NetDef as a pointer rather than being directly contained), but it
seemed dishonest to not mark it as const (and thus permit users to
modify its contents)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
This is needed if we want to call the function when the
virDomainNetDef* we have is a const.
Since virDomainNetGetActualVlan returns a pointer to memory that is
within the virDomainNetDefPtr arg, the returned pointer must also be
made const. This leads to a cascade of other virNetDevVlanPtr's that
must be changed to "const virNetDevVlan *".
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
On s390 machines host-passthrough and host-model CPUs result in the same
guest ABI (with QEMU new enough to be able to tell us what "host" CPU is
expanded to, which was implemented around 2.9.0). So instead of using
host-passthrough CPU when there's no CPU specified in a domain XML we
can safely use host-model and benefit from CPU compatibility checks
during migration, snapshot restore and similar operations.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Most likely for historical reasons our CPU def formatting code is
happily adding useless <model fallback='allow'/> for host-model CPUs. We
can just drop it.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The test case for x86_64 and neither cirrus nor vga capability is of the
xml2argv type because it actually fails to parse the XML at all [*] which
is something that xml2xml tests don't seem to handle. xml2argv test fails
to produce a qemu argv for this case which xml2argv tests can handle.
[*] This is a consequence of the decision not to have a fallback if the
obvious choices (cirrus and vga) aren't viable due to missing QEMU caps.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Pavel Mores <pmores@redhat.com>
The test relied implicitly on default video device being cirrus. As we're
about to change that the test would start failing. To avoid this, just make
the test's requirement explicit.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Pavel Mores <pmores@redhat.com>
Now that all pieces are in place (hopefully) let's enable -blockdev.
We base the capability on presence of the fix for 'auto-read-only' on
files so that blockdev works properly, mandate that qemu supports
explicit SCSI id strings to avoid ABI regression and that the fix for
'savevm' is present so that internal snapshots work.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The 'savevm' HMP command didn't work properly with blockdev as it tried
to do snapshot of everything including the protocol nodes accessing
files which are not snapshottable. Qemu fixed this bug so now we need to
detect it to allow enabling blockdev.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Initial implementation of 'auto-read-only' didn't reopen the backing
files when needed. For '-blockdev' to work we need to be able to tel
qemu to open a file read-only and change it during blockjobs as we label
backing chains with a sVirt label which does not allow writing. The
dynamic auto-read-only supports this as it reopens files when writing
is demanded.
Add a capability to detect that the posix file based backends support
the dynamic part.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The data is captured from qemu v4.2.0-rc2-19-g2061735ff0
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The qemu driver will obey <backingStore> when we support blockdev.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Adding build time self tests for basic (deprecated), doorbell and plain mode.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
When starting a domain without a CPU model specified in the domain XML,
QEMU will choose a default one. Which is fine unless the domain gets
migrated to another host because libvirt doesn't perform any CPU ABI
checks and the virtual CPU provided by QEMU on the destination host can
differ from the one on the source host.
With QEMU 4.2.0 we can probe for the default CPU model used by QEMU for
a particular machine type and store it in the domain XML. This way the
chosen CPU model is more visible to users and libvirt will make sure
the guest will see the exact same CPU after migration.
Architecture specific notes
- aarch64: We only set the default CPU for TCG domains as KVM requires
explicit "-cpu host" to work.
- ppc64: The default CPU for KVM is "host" thanks to some hacks in QEMU,
we will translate the default model to the model corresponding to the
host CPU ("POWER8" on a Power8 host, "POWER9" on Power9 host, etc.).
This is not a problem as the corresponding CPU model is in fact an
alias for "host". This is probably not ideal, but it's not wrong and
the default virtual CPU configured by libvirt is the same QEMU would
use. TCG uses various CPU models depending on machine type and its
version.
- s390x: The default CPU for KVM is "host" while TCG defaults to "qemu".
- x86_64: The default CPU model (qemu64) is not runnable on any host
with KVM, but QEMU just disables unavailable features and starts
happily.
https://bugzilla.redhat.com/show_bug.cgi?id=1598151https://bugzilla.redhat.com/show_bug.cgi?id=1598162
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU 4.2.0 will report default CPU types used by each machine type and
we will want to start using it.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Almost all TCG query-machines replies match KVM. The only exceptions are
4.2.0 replies on s390x which differ in the reported default CPU type.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some specifics of machine types may depend on the accelerator and thus
the data should be moved to virQEMUCapsAccel. The TCG machine types are
just copied from the ones probed for KVM to simplify the changes to
qemucapabilitiestest data files.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In preparation for making machine types dependent on the accelerator,
the <machine> elements are formatted between <cpu type='kvm'> and
<cpu type='tcg'>.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It is a tiny wrapper around virQEMUCapsProbeQMPCPUDefinitions which will
soon get private parameters and thus it cannot be exposed outside
qemu_capabilities.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The new functions are designed to load and format capabilities which
depend on the accelerator (host CPU expansion and CPU models).
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We need to create a mapping between CPU model names and their
corresponding QOM types.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The functions return virDomainCapsCPUModelsPtr and thus they should be
called *CPUModels for consistency. Functions called *CPUDefinitions will
work on qemuMonitorCPUDefsPtr.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While virDomainCapsCPUModel structure contains 'usable' field with
virDomainCapsCPUUsable type, the lower level structure specific to QEMU
driver used virTriStateBool for the same thing and we had to translate
between them.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Let's store qemuMonitorCPUDefInfo directly in the array of CPUs in
qemuMonitorCPUDefs rather then using an array of pointers.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It is a container for a CPU models list (qemuMonitorCPUDefInfo) and a
number of elements in this list.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some callers of virQEMUCapsGetCPUDefinitions will need to filter the
returned list of CPU models. Let's add the filtering parameters directly
to virQEMUCapsGetCPUDefinitions to avoid copying the CPU models list
twice.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rather than returning a direct pointer the list stored in qemuCaps the
function now creates a new copy of the CPU models list.
The main purpose of this seemingly useless change is to update callers
to free the result returned by virQEMUCapsGetCPUDefinitions because the
internals of this function will change significantly in the following
patches.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Generated with "spapr/kvm: Set default cpu model for all machine
classes" fix for QEMU applied.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We replaced them by use of transaction to simplify possible failure
scenarios.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
testSchemaDir is a helper which invokes the schema test using virTestRun
on all schema files. Since the function itself is not called inside
virTestRun any helper function call is not dispatched to the user and
thus it's hard to debug the test. Propagate errors from the directory
traversal.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In cases when we call a libvirt helper which reports an error the error
would be hidden unless libvirt library debug is on. This produces a lot
of output and is hard to debug.
The helper provides a way to dispatch the libvirt error in specific
cases sice we do already dispatch it in case when virTestRun is used.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Refactor various functions to avoid multiple freeing function calls.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This flag is not implied by g_mkstemp_full, only by g_mkstemp.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reported-by: Bjoern Walk <bwalk@linux.ibm.com>
Fixes: 4ac4773040
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Glib implementation follows the ISO C99 standard so it's safe to replace
the gnulib implementation.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
We need to mock virCgroupV2DevicesAvailable() in order to remove any
dependency on kernel as BPF devices might not be available.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some of our tests try to validate domain XMLs they are working
with (not intentionally, simply because they call top level
domain XML parse function). Anyway, this implies that we build
domain capabilities also - see
virQEMUDriverGetDomainCapabilities(). And since some domain XMLs
are type of 'kvm' the control gets through
virQEMUCapsFillDomainCaps() and virHostCPUGetKVMMaxVCPUs() to
opening /dev/kvm which may be missing on the machine we're
running 'make check'.
Previously, we did not see this issue, because it was masked. If
building domain capabilities failed for whatever reason, we
ignored the failure. Only v5.9.0-207-gc69e6edea3 uncovered the
problem (it changed reval from 0 to -1 if
virQEMUDriverGetDomainCapabilities() fails). Since the referenced
commit is correct, we need to mock access to /dev/kvm in our
tests.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Some layered products such as oVirt have requested a way to avoid being
blocked by guest agent commands when querying a loaded vm. For example,
many guest agent commands are polled periodically to monitor changes,
and rather than blocking the calling process, they'd prefer to simply
time out when an agent query is taking too long.
This patch adds a way for the user to specify a custom agent timeout
that is applied to all agent commands.
One special case to note here is the 'guest-sync' command. 'guest-sync'
is issued internally prior to calling any other command. (For example,
when libvirt wants to call 'guest-get-fsinfo', we first call
'guest-sync' and then call 'guest-get-fsinfo').
Previously, the 'guest-sync' command used a 5-second timeout
(VIR_DOMAIN_QEMU_AGENT_COMMAND_DEFAULT), whereas the actual command that
followed always blocked indefinitely
(VIR_DOMAIN_QEMU_AGENT_COMMAND_BLOCK). As part of this patch, if a
custom timeout is specified that is shorter than
5 seconds, this new timeout is also used for 'guest-sync'. If there is
no custom timeout or if the custom timeout is longer than 5 seconds, we
will continue to use the 5-second timeout.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
With g_mkstemp_full, there is no need to distinguish between
mkostemp and mkostemps (no suffix vs. a suffix of a fixed length),
because the GLib function looks for the XXXXXX pattern everywhere
in the string.
Use S_IRUSR | S_IWUSR for the permissions and do not pass O_RDWR
in flags since it's implied.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The 'ramfb' attribute provides a framebuffer to the guest that can be
used as a boot display for the vgpu
For example, the following configuration can be used to provide a vgpu
with a boot display:
<hostdev mode='subsystem' type='mdev' model='vfio-pci' display='on' ramfb='on'>
<source>
<address uuid='$UUID'/>
</source>
</hostdev>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
In a follow-up commit, we will use the domain capabilities to validate
video device configurations, which means that we also need to make sure
that the domain capabilities include the "none" video device.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
commit 9bfcf0f62d added the
QEMU_CAPS_DEVICE_RAMFB capability but did not set the domain capability.
This patch sets the domain capability for the ramfb device and updates
the tests.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Several tests were not specifying the necessary qemu capabilities for
what they were testing. Due to the way that the video devices are
currently validated, this is not causing any problems. But a change to
video device validation in a following patch would have exposed this
issue and resulted in multiple test failures about the domain
configuration not supporting particular video models.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
qemu_hotplugpriv.h is a header file created to share a global variable
called 'qemuDomainRemoveDeviceWaitTime', declared in qemu_hotplug.c,
to other files that would want to change the timeout value
(currently, only tests/qemuhotplugtest.c).
Previous patch deprecated the variable, using qemu_driver->unplugTimeout
to set the timeout instead. This means that the header file is now
unused, and can be safely discarded.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
For some architectures and setups, device removal can take
longer than the default 5 seconds. This results in commands
such as 'virsh setvcpus' to fire timeout messages even if
the operation were successful in the guest, confusing the
user.
This patch sets a new 10 seconds unplug timeout for PPC64
guests. All other archs will keep the default 5 seconds
timeout.
Instead of putting 'if PPC64' conditionals inside qemu_hotplug.c
to set the new timeout value, a new function called
qemuDomainGetUnplugTimeout was added. The timeout value is then
retrieved when needed, by passing the correspondent DomainDef
object. This approach allows for different guest architectures
to have distint unplug timeout intervals, regardless of the
host architecture. This design also makes it easier to
modify/enhance the unplug timeout logic in the future
(allow for special timeouts for TCG domains, for example).
A new mock file was created to work with qemuhotplugtest.c,
given that the test timeout is significantly shorter than
the actual timeout value in qemu_hotplug.c.
The now unused 'qemuDomainRemoveDeviceWaitTime' global can't
be simply erased from qemu_hotplug.c though. Next patch will
remove it properly.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Suggested-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Remove the need to pass around strings and switch to the enum values
instead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The capabilities are declared in the XML schema so passing feature names
as strings from hypervisor drivers makes no sense.
Additionally some of the features expose so called 'toggles' while
others not. This knowledge was encoded by a bunch of 'STREQ's in the
formatter.
Change all of this by declaring the features as an enum and use it
instead of a dynamically allocated array.
Presence of 'toggles' is encoded together with the conversion strings
rather than in the formatter directly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The pconfig feature was enabled in QEMU by accident in 3.1.0. All other
newer versions do not support it and it was removed from the
Icelake-Server CPU model in QEMU.
We don't normally change our CPU models even when QEMU does so to avoid
breaking migrations between different versions of libvirt. But we can
safely do so in this specific case. QEMU never supported enabling
pconfig so any domain which was able to start has pconfig disabled.
With a small compatibility hack which explicitly disables pconfig when
CPU model equals Icelake-Server in migratable domain definition, only
one migration scenario stays broken (and there's nothing we can do about
it): from any host to a host with libvirt < 5.10.0 and QEMU > 3.1.0.
https://bugzilla.redhat.com/show_bug.cgi?id=1749672
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When a CPU definition wants to explicitly disable some features that are
unknown to QEMU, we can safely drop them from the definition before
starting QEMU. Naturally QEMU won't enable such features implicitly.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Since we are not passing the @fakerootdir variable to any inline function
anymore, we can make the variable static.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Since 6a077cf2b3 domaincapstest does not run through all cases on
failure but terminates right away. This makes it super annoying to debug
or use in combination with VIR_TEST_REGENERATE_OUTPUT.
Fix it by remembering failure and still running through all cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
There should be a single space either side of operators. Inline
comments should have two spaces before the '#'
src/hyperv/hyperv_wmi_generator.py:130:45: E261 at least two spaces before inline comment
source += ' { "", "", 0 },\n' # null terminated
^
src/esx/esx_vi_generator.py:417:25: E221 multiple spaces before operator
FEATURE__DESERIALIZE = (1 << 6)
^
tests/cputestdata/cpu-cpuid.py:187:78: E225 missing whitespace around operator
f.write(" <msr index='0x%x' edx='0x%08x' eax='0x%08x'/>\n" %(
^
docs/apibuild.py:524:47: E226 missing whitespace around arithmetic operator
self.line = line[i+2:]
^
...more...
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Coding style expects 1 blank line between each method and 2 blank lines
before each class.
docs/apibuild.py:171:5: E303 too many blank lines (2)
def set_header(self, header):
^
docs/apibuild.py:230:1: E302 expected 2 blank lines, found 1
class index:
^
docs/apibuild.py:175:5: E301 expected 1 blank line, found 0
def set_module(self, module):
^
...more...
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
