`cur` is guaranteed to be of type `XML_ELEMENT_NODE` by using
`xmlFirstElementChild()` and `xmlNextElementSibling()`.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
"xmlNextElementSibling()" skips attribute nodes, making the explicit
check for the type of `cur` redundant. This prepares for the removal
of this check in the next commit.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add support for customizable grabToggle key combinations with
<input type='evdev'>.
Signed-off-by: Justin Gatzen <justin.gatzen@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The submission of the event to the helper thread has a verbose cleanup
path which was duplicated in all the event handlers. Simplify it by
extracting the code into a helper named 'qemuProcessEventSubmit' and
reuse it where appropriate.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Change the callback prototype and fix the callback registered in the
process code.
The removed error messages are impossible as the enum values are
converted via VIR_ENUM helpers and guarded by compiler checks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Change the callback prototype and fix the callback registered in the
process code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Change the callback prototype and fix the callback registered in the
process code.
It is also impossible for @info to be non-NULL in the cleanup section so
the cleanup can be completely removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Change the callback prototype and fix the callback registered in the
process code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Change the callback prototype and fix the callback registered in the
process code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Change the callback prototype and fix the callback registered in the
process code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Change the callback prototype and fix the callback registered in the
process code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Change the callback prototype and fix the callback registered in the
process code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Change the callback prototype and fix the callback registered in the
process code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Change the callback prototype and fix the callback registered in the
process code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Change the callback prototype and fix the callback registered in the
process code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Change the callback prototype and fix the callback registered in the
process code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Change the callback prototype and fix the callback registered in the
process code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Change the callback prototype and fix the callback registered in the
process code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Change the callback prototype and fix the callback registered in the
process code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Change the callback prototype and fix the callback registered in the
process code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Change the callback prototype and fix the callback registered in the
process code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Change the callback prototype and fix the callback registered in the
process code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Change the callback prototype and fix the callback registered in the
process code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Change the callback prototype and fix the callback registered in the
process code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Change the callback prototype and fix the callback registered in the
process code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Change the callback prototype and fix the callback registered in the
process code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Change the callback prototype and fix the callback registered in the
process code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Change the callback prototype and fix the callback registered in the
process code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Change the callback prototype and fix the callback registered in the
process code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Change the callback prototype and fix the callback registered in the
process code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Change the callback prototype and fix the callback registered in the
process code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Change the callback prototype and fix the callback registered in the
process code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Change the callback prototype and fix the callback registered in the
process code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Change the callback prototype and fix the callback registered in the
process code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The callers in the monitor code invoking the callbacks after events are
received don't actually check the return value from the callbacks and
there isn't really anything we could do on failure.
Remove the return value from the intermediary functions so we can later
remove them from the callback prototypes.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The qemu process code doesn't register a callback for it so we don't
need to be handling it at all.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'virStoragePoolObjListSearch' returns a locked and refed object, thus we
must release it on ACL permission failure.
Fixes: 7aa0e8c0cb
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1984318
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit e9b534905f introduced an error when parsing an empty list
returned from mdevctl.
This occurs e.g. if nodedev-undefine is used to undefine the last
defined mdev which causes the following error messages
libvirtd[33143]: internal error: Unexpected format for mdevctl response
libvirtd[33143]: internal error: failed to query mdevs from mdevctl:
libvirtd[33143]: mdevctl failed to updated mediated devices
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
If the function is called with maxlen equal to `INT_MAX`, adding
one will trigger a signed integer overflow.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Since commit d399a728f4 placed the restore in the right scope the
restore can get removed in virDomainSEVDefParseXML.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We just found <qemu:commandline> is ignored in our xml. Further debug
shows that ctxt's node pointer isn't restored in virDomainSecDefParseXML(),
which leads to parsing of remaining elements failed.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
When SEV is not supported but specified in the domain XML by a user it
should not result in an internal error (VIR_ERR_INTERNAL_ERROR)
therefore switching to XML error (VIR_ERR_CONFIG_UNSUPPORTED).
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Use the common id 'lsec0' for all launchSecurity types in the QEMU
command line construction.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Adding availability of s390-pv in domain capabilities and adjust tests.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Add launch security type 's390-pv' as well as some tests.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Adding virDomainSecDef for general launch security data
and moving virDomainSEVDef as an element for SEV data.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Make use of virDomainLaunchSecurity enum.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
When doing a peer-to-peer migration it may happen that the
connection to the destination disappears. If that happens,
there's no point in trying to unregister the close callback
because the connection is closed already. It results only in
polluting logs with this message:
error : virNetSocketReadWire:1814 : End of file while reading data: : Input/output error
and the reason for that is unregistering a connection callback
results in RPC (among other things).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1918211
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This appears to be a copy-paste mistake from the check directly above.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemuMigrationSrcRunPrepareBlockDirtyBitmaps receives the flags parameter
from qemuMigrationSrcRun, where flags are based on the main API enum
values. Similar to commit f58349c9c6, use the main API enum instead of
internal driver enum when checking flags in
qemuMigrationSrcRunPrepareBlockDirtyBitmaps.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signaling the condition before vm->def->id is reset to -1 is dangerous:
in case a waiting thread wakes up, it does not see anything interesting
(the domain is still marked as running) and just enters virDomainObjWait
where it waits forever because the condition will never be signalled
again.
Originally it was impossible to get into such situation because the vm
object was locked all the time between signaling the condition and
resetting vm->def->id, but after commit 860a999802 released in 6.8.0,
qemuDomainObjStopWorker called in qemuProcessStop between
virDomainObjBroadcast and setting vm->def->id to -1 unlocks the vm
object giving other threads a chance to wake up and possibly hang.
In real world, this can be easily reproduced by killing, destroying, or
just shutting down (from the guest OS) a domain while it is being
migrated somewhere else. The migration job would never finish.
So let's make sure we delay signaling the domain condition to the point
when a woken up thread can detect the domain is not active anymore.
https://bugzilla.redhat.com/show_bug.cgi?id=1949869
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
On libvirtd startup, the list of priority worker threads is uninitialized
(`pool->prioWorkers` is NULL), and then "expanded" to zero (`prioWorkers`)
entries.
This causes `virThreadPoolExpand` to call `VIR_EXPAND_N` on a null pointer
and an increment of zero. The zero increment triggers `virReallocN` to not
actually allocate any memory and leave the pointer NULL, which, eventually,
causes `memset(NULL, 0, 0)` to be called in `virExpandN`.
`memset` is declared `__attribute__ ((__nonnull__ 1))`, which triggers the
following warning when libvirt is compiled with address sanitizing enabled:
$ meson -Dbuildtype=debug -Db_lundef=false -Db_sanitize=address,undefined
build && ninja -C build
$ ./build/run build/src/libvirtd
src/util/viralloc.c:82:5: runtime error: null pointer passed as
argument 1, which is declared to never be null
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This simplyfies the code a bit and removes one "goto", one "VIR_FREE",
and one "VIR_INSERT_ELEMENT_COPY".
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
As test driver won't have real background job running, in order to get
all possible states, the time is used here to decide which state to be
returned. The default time will get `ok` as return value.
Note that using `virsh domtime fc4 200` won't take effect for the test
driver, to get other states, you have to enter virsh interactive
terminal and set time.
Signed-off-by: Luke Yue <lukedyue@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If the queried QMP command doesn't exist qemuMonitorGetTPMModels returns
0 but sets the string list to NULL which isn't accepted by
g_strv_contains.
Fixes: a5bc5f0ecf
Reported-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Inactive mdevs were simply formatting their parent name as the value
received from mdevctl rather than looking up the libvirt nodedev name of
the parent device. This resulted in a parent value of e.g.
'0000:5b:00.0' instead of 'pci_0000_5b_00_0'. This prevented defining a
new mdev device from the output of nodedev-dumpxml.
Unfortunately, it's not simple to fix this comprehensively due to the
fact that mdevctl supports defining (inactive) mdevs for parent devices
that do not actually exist on the host (yet). So for those persistent
mdev definitions that do not have a valid parent in the device list, the
parent device will be set to the root "computer" device.
Unfortunately, because the value of the 'parent' field now depends on
the configuration of the host, the mdevctl parsing test will output
'computer' for all test devices. Fixing this would require a more
extensive mock test environment.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1979761
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Having multiple addresses having same hostname is a common config either
to have IPv4 and IPv6 address for the same hostname or even for DNS
round robin. The validation in the network update code didn't allow
adding such entries despite the fact that it is possible to define a
network with them.
Don't check hostname duplicity when adding a DNS entry.
The update of the test case adds another entry for the 'pudding'
hostname which is added in one of the networkxml2xmlupdate test cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We need to report via domcapabilities if specifying shared memory
is supported without hugepages or numa config in order to find
out if domain has suitable setup to make virtiofs work.
The solution is to report source types of memory backing to
determine if memfd is a valid option.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This was bothering someone as the debug message looked like there was an issue
despite it being just a debug message. Change it to what is actually happening
and why the name is being skipped.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
If the attempt to attach a device failed, we erased the
unattached device from the namespace. This resulted in erasing an
already attached device in case of a duplicate. We need to check
for existing file in the namespace in order to determine erasing
it in case of a failure.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1780508
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
A new apparmor profile initially derived from the libvirtd profile.
All rules were prefixed with the 'audit' qualifier to verify they
are actually used by virtxend. It turns out that several, beyond
the obvious ones, can be dropped in the resulting virtxend profile.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
A new apparmor profile derived from the libvirtd profile, with non-QEMU
related rules removed. Adopt the libvirt-qemu abstraction to work with
the new profile.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
This is a followup for commit e906c4d02b
("apparmor: Allow /usr/libexec for libxl-save-helper and pygrub"):
In recent rpm versions --libexecdir changed from /usr/lib64 to
/usr/libexec. A plain rpmbuild %configure in xen.git will install all
files, including the private copies of qemu, into /usr/libexec/xen/bin.
Expand the existing pattern to cover also this libexecdir variant.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We have an example in virDirRead() documentation on how to use
the function. In there, the directory structure is plain DIR, but
that won't work anymore. Switch over to g_autoptr(DIR) which is
what we use now.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Allow swtpm (0.7.0 or later) to fsync on the directory where it writes
its state files into so that "the entry in the directory containing the
file has also reached disk" (fsync(2)).
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
`virHashNew` cannot return NULL, the check is not needed.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The same pattern of retrieving the domXML, running the hook script, and
checking for error is used throughout the libxl driver. Remove some
repetitive code by adding a helper function to perform these tasks.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce libxlDomainStartPerform as part of decomposing libxlDomainStart.
Perform all operations that are part of starting a domain. On error the
domain is destroyed from libxl's perspective, but the operations perfomed
in libxlDomainStartPrepare must be unwound by libxlDomainStart.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce libxlDomainStartPrepare as part of decomposing libxlDomainStart.
Perform all prepratory operations such as hostdevs, network devs, etc.
Also ensure all such operations are properly unwound on error.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move network device cleanup code from libxlDomainCleanup to a helper
function for use in a subsequent patch.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
the logic to check for existence of a managed save image and use it to
start the VM can be moved to libxlDomainStartNew. libxlDomainStart has
become unwieldy and this is a small step to make it more manageable.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'storageMigration' flag is supposed to be true if storage migration
is requested, which is based on VIR_MIGRATE_NON_SHARED_DISK or
VIR_MIGRATE_NON_SHARED_INC flags. The assignment to the variable used
QEMU_MONITOR_MIGRATE_NON_SHARED_INC (0x04) instead of
VIR_MIGRATE_NON_SHARED_INC (0x80), caused libvirtd to skip the actual
copy of data.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1978526
Fixes: da69f4b208
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Libvirt started emitting two threshold events, once with index and once
withouth when the index isn't registered. Document this caveat.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Remember whether the user passed an explicit index when registering the
event so that we can avoid the top level event when it isn't needed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When users register the threshold event for the top level image with an
explicit index (e.g. vda[3]) they are clearly expecting the index in the
event.
This flag will help avoiding emission of the second event without the
index when the client clearly requested one with the index.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When qos is set or delete, we have to check if the port is an ovs managed
port. If true, call the virNetDevOpenvswitchInterfaceSetQos function when qos
is set, and call the virNetDevOpenvswitchInterfaceClearQos function when
the interface is to be destroyed.
Signed-off-by: Jinsheng Zhang <zhangjl02@inspur.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Return 0 directly if the port is ovs managed. When the ovs port is set
noqueue, qos config on this port will not work.
Signed-off-by: Jinsheng Zhang <zhangjl02@inspur.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Introduce qos setting and cleaning method. Use ovs command to set qos
parameters on specific interface of qemu virtual machine.
When an ovs port is created, we add 'ifname' to external-ids. When setting
qos on an ovs port, query its qos and queue. If found, change qos on queried
queue and qos, otherwise create new queue and qos. When cleaning qos, query
and clean queues and qos in ovs table record by 'ifname' and 'vmid'.
Signed-off-by: Jinsheng Zhang <zhangjl02@inspur.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Tell whether a port definition is an ovs managed virtual port
Signed-off-by: Jinsheng Zhang <zhangjl02@inspur.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When seeing a guest with a sound device, and no audio backend, we
automatically add an audio backend XML element based on the historical
QEMU driver behaviour. Unfortunately when we live migrate back to an
old libvirt, it may not understand the audio driver type we configured.
We thus need to strip the default audio backend when migrating.
Fixes https://gitlab.com/libvirt/libvirt/-/issues/179
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
There might be misunderstanding [1] when libvirt permits domain
redefinition and if it's a valid case at all.
1. b973d7c4b4/plugins/modules/virt.py (L533)
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It all started as a simple bug: trying to move domain memory
between NUMA nodes (e.g. via virsh numatune) did not work. I've
traced the problem to qemuProcessHook() because that's where we
decide whether to rely on CGroups or use numactl APIs to satisfy
<numatune/>. The problem was that virCgroupControllerAvailable()
was telling us that cpuset controller is unavailable. This is
CGroupsV2, and pretty weird because CGroupsV2 definitely do
support cpuset controller and I had them mounted in a standard
way. What I found out (with Pavel's help) was that
virCgroupNewSelf() was looking into the following path to detect
supported controllers:
/sys/fs/cgroup/system.slice/cgroup.controllers
However, if there's no other VM running then the system.slice
only has 'memory' and 'pids' controllers. Therefore, we saw
'cpuset' as not available. The fix is to look at the top most
path, which has the full set of controllers:
/sys/fs/cgroup/cgroup.controllers
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1976690
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
When the qemu or libxl driver is configured to use lockd and
file_lockspace_dir is set, virtlockd emits an error when libvirtd
is retarted
May 25 15:44:31 virt81 virtlockd[7723]: Requested operation is not
valid: Lockspace for path /data/libvirtd/lockspace already exists
There is really no need to fail when the lockspace already exists,
paricularly since the user is expected to create the lockspace
specified in file_lockspace_dir. Failure to do so will prevent
starting any domains
virsh start test
error: Failed to start domain 'test'
error: Unable to open/create resource /data/libvirtd/lockspace/de22c4bf931e7c48b49e8ca64b477d44e78a51543e534df488b05ccd08ec5caa: No such file or directory
Also, virLockManagerLockDaemonSetupLockspace already has logic to ignore
the error. Since callers are not interested in the error, change
virtlockd to not report or return an error when the specified lockspace
already exists.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
If guest is configured to use memfd then the function that build
memory-backend-* part of command line will put
memory-backend-memfd, always. Even for NVDIMMs. This is not
correct, because NVDIMMs need a backing path (usually to a real
host NVDIMM device). Therefore, regardless of memfd being
requested, we have to stick with memory-backend-file.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
When constructing guest name for machined we have to be very
cautious as machined expects a name that's basically a valid URI.
Therefore, if there's a dot it has to be followed by a letter or
a number. And if there's a sequence of two or more dashes they
should be joined into a single dash. These rules are implemented
in virDomainMachineNameAppendValid(). There's the @skip variable
which is supposed to track whether it is safe to append a dot or
a dash into name. However, the variable is set to false (meaning
it is safe to append a dot or a dash) even if the current
character we are processing is not in the set of allowed
characters (and thus skipped over).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1948433
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
In 'virResctrlAllocUpdateMask', mask is updated only if 'previous mask' is NULL.
By default, the bitmask for a cache resource for a VM is initialized with
'default-resctrl-group' bitmask. So the 'previous mask' would not be NULL and
mask won't get updated if cachetune is configured for a VM. This causes libvirt
to use same bitmask as 'default-resctrl-group' bitmask for a cache resource for
a VM. This patch fixes the issue.
Fixes: d8a354954a
Signed-off-by: Vinayak Kale <vkale@nvidia.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Bounding set capabilities were introduced in kernel commit of
v2.6.25-rc1~912. I guess it is safe to assume that all Linux
hosts we ran on have at least that version or newer.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
When trying to destroy a node device that is not active, we end up with
a confusing error message:
# nodedev-destroy mdev_88a6b868_46bd_4015_8e5b_26107f82da38
error: Failed to destroy node device 'mdev_88a6b868_46bd_4015_8e5b_26107f82da38'
error: failed to access '/sys/bus/mdev/devices/88a6b868-46bd-4015-8e5b-26107f82da38/iommu_group': No such file or directory
With this patch, the error is more clear:
# nodedev-destroy mdev_88a6b868_46bd_4015_8e5b_26107f82da38
error: Failed to destroy node device 'mdev_88a6b868_46bd_4015_8e5b_26107f82da38'
error: Requested operation is not valid: Device 'mdev_88a6b868_46bd_4015_8e5b_26107f82da38' is not active
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Currently, we have three different types of mdevctl errors:
1. the command cannot be constructed ecause of unsatisfied
preconditions
2. the command cannot be executed due to some error
3. the command is executed, but returns an error status
These different failures are handled differently. Some cases set an
error and return and error status, and some return a error message but
do not set an error.
This means that the caller has to check both whether the return value is
negative and whether the errmsg parameter is non-NULL before deciding
whether to report the error or not. The situation is further complicated
by the fact that there are occasional instances where mdevctl exits with
an error status but does not print an error message. This results in
errmsg being an empty string "" (i.e. non-NULL).
Simplify the situation by ensuring that virReportError() is called for
all error conditions rather than returning an error message back to the
calling function.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
This macro will be utilized in the following patch. Since mdevctl
commands can fail with or without an error message, this macro makes it
easy to print a fallback error in the case that the error message is not
set.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
In commit 68580a51, I removed the checks for NULL cmd variables because
virCommandRun() already handles the case where it is called with a NULL
cmd. Unfortunately, it handles this case by raising a generic error
which is both unhelpful and overwrites our existing error message. So
for example, when I attempt to create a mediated device with an invalid
parent, I get the following output:
virsh # nodedev-create mdev-test.xml
error: Failed to create node device from mdev-test.xml
error: internal error: invalid use of command API
With this patch, I now get a useful error message again:
virsh # nodedev-create mdev-test.xml
error: Failed to create node device from mdev-test.xml
error: internal error: unable to find parent device 'pci_0000_00_03_0'
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
At the point where the error message is emitted, the field def->name is
still set to "new device", so the error message becomes:
Unable to start mediated device 'new device': ...
Since the name doesn't contain anything useful, just omit it from the
error message altogether.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Due to a rather unfortunate misunderstanding, we were parsing the list
of defined devices from mdevctl incorrectly. Since my primary
development machine only has a single device capable of mdevs, I
apparently neglected to test multiple parent devices and made some
assumptions based on reading the mdevctl code. These assumptions turned
out to be incorrect, so the parsing failed when devices from more than
one parent device were returned.
The details: mdevctl returns an array of objects representing the
defined devices. But instead of an array of multiple objects (with each
object representing a parent device), the array always contains only a
single object. That object has a separate property for each parent
device.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It is possible to define/edit(in shut off state) a domain XML with
same hostdev device repeated more than once, as shown below. This
behavior is not expected. So, this patch fixes it.
vser1:
<domain type='kvm'>
[...]
<devices>
[...]
<hostdev mode='subsystem' type='mdev' managed='no' model='vfio-ccw'>
<source>
<address uuid='8e782fea-e5f4-45fa-a0f9-024cf66e5009'/>
</source>
<address type='ccw' cssid='0xfe' ssid='0x0' devno='0x0005'/>
</hostdev>
<hostdev mode='subsystem' type='mdev' managed='no' model='vfio-ccw'>
<source>
<address uuid='8e782fea-e5f4-45fa-a0f9-024cf66e5009'/>
</source>
<address type='ccw' cssid='0xfe' ssid='0x0' devno='0x0006'/>
</hostdev>
[...]
</devices>
</domain>
$ virsh define vser1
Domain 'vser1' defined from vser1
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We already reject TPM 1.2 in a number of scenarios; let's add
ARM virt guests to the list.
https://bugzilla.redhat.com/show_bug.cgi?id=1970310
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Liu Yiding <liuyd.fnst@fujitsu.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The TPM 2.0 specification predates ARM virtualization, and so
implementing TPM 1.2 support on ARM was not considered a useful
endeavor.
This is technically a breaking change, but TPM support on ARM was
only introduced fairly recently (libvirt 7.1.0) and the previous
default resulted in non working TPM devices; anyone who has a
working configuration is not going to be affected.
https://bugzilla.redhat.com/show_bug.cgi?id=1970310
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Liu Yiding <liuyd.fnst@fujitsu.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
A process can access a file if the set of MCS categories
for the file is equal-to *or* a subset-of, the set of
MCS categories for the process.
If there are two VMs:
a) svirt_t:s0:c117
b) svirt_t:s0:c117,c720
Then VM (b) is able to access files labelled for VM (a).
IOW, we must discard case where the categories are equal
because that is a subset of many other valid category pairs.
Fixes: https://gitlab.com/libvirt/libvirt/-/issues/153
CVE-2021-3631
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
There are few cases where we execute a virCommand with all caps
cleared (virCommandClearCaps()). For instance
dnsmasqCapsRefreshInternal() does just that. This means, that
after fork() and before exec() the virSetUIDGIDWithCaps() is
called. But since the caller did not want to change anything,
just drop capabilities, these are the values of arguments:
virSetUIDGIDWithCaps (uid=-1, gid=-1, groups=0x0, ngroups=0,
capBits=0, clearExistingCaps=true)
This means that indeed all capabilities will be dropped,
including CAP_SETPCAP. But this capability controls whether
capabilities can be set, IOW whether capng_apply() succeeds.
There are two calls of capng_apply() in the function. The
CAP_SETPCAP is dropped after the first call and thus the other
call (capng_apply(CAPNG_SELECT_BOUNDS);) fails.
The solution is to keep the capability for as long as needed
(just like CAP_SETGID and CAP_SETUID) and drop it only at the
very end (just like CAP_SETGID and CAP_SETUID).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1949388
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
I noticed the following denial when running confined VMs with the QEMU
driver
type=AVC msg=audit(1623865089.263:865): apparmor="DENIED" operation="open" \
profile="virt-aa-helper" name="/etc/ssl/openssl.cnf" pid=12503 \
comm="virt-aa-helper" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
Allow reading the file by including the openssl abstraction in the
virt-aa-helper profile.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
I noticed the following denial messages from apparmor in audit.log when
starting confined VMs via the QEMU driver
type=AVC msg=audit(1623864006.370:837): apparmor="DENIED" operation="open" \
profile="virt-aa-helper" name="/etc/libnl/classid" pid=11265 \
comm="virt-aa-helper" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
type=AVC msg=audit(1623864006.582:849): apparmor="DENIED" operation="open" \
profile="libvirt-0ca2720d-6cff-48bb-86c2-61ab9a79b6e9" \
name="/etc/libnl/classid" pid=11270 comm="qemu-system-x86" \
requested_mask="r" denied_mask="r" fsuid=107 ouid=0
It is possible for site admins to assign names to classids in this file,
which are then used by all libnl tools, possibly those used by libvirt.
To be on the safe side, allow read access to the file in the virt-aa-helper
profile and the libvirt-qemu abstraction.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
The host key fingerprint for SSH servers is used in a scenario where
cryptographic strength is important. We should thus be defaulting to
use of SHA256 where available. We only need SHA1 for Ubuntu 18.04
which does not have libssh >= 0.8.1
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Iterating over all child elements of a node does not require xpath.
By doing away with xpath for this code, the code can be simplified.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Cleanup to follow. This removes the last re-use of `nodes` in this function,
eliminating two VIR_FREEs.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Iterating over all child elements of a node does not require xpath.
By doing away with xpath for this code, the code can be simplified.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
`feature` is always one of the values listed in the switch,
ensured by `virDomainKVMTypeFromString` above.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Iterating over all child elements of a node does not require xpath.
By doing away with xpath for this code, the code can be simplified.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Iterating over all child elements of a node does not require xpath.
By doing away with xpath for this code, the code can be simplified.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Iterating over all child elements of a node does not require xpath.
By doing away with xpath for this code, the code can be inlined and
simplified. This also removes the re-use of `nodes`, elimininating
two VIR_FREEs.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Vast majority of device types is not supported by the Cloud-Hypervisor
driver. Simplify the error reporting by using
virDomainDeviceTypeToString.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Now that the minimum supported Xen version has bumped to 4.9, all
uses of LIBXL_HAVE_* that are included in Xen 4.9 can be removed
from the libxl driver.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When removing check for return value of VIR_EXPAND_N this place was
incorrectly modified causing failure to start a VM with cputune
memorytune configured with useless error message:
error: Failed to start domain 'vm1'
error: An error occurred, but the cause is unknown
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1973094
Fixes: 7d2fd6ef01
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virISCSIDirectScanTargets now returns a GStrv, so we can use automatic
cleanup for it and get rid of the cleanup section.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Count the elements in advance rather than using VIR_APPEND_ELEMENT and
ensure that there's a NULL terminator for the string list so it's GStrv
compatible.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Using an allocated version together with copying the
host/initiator/device portions into it allows us to switch to automatic
clearing rather than open-coding it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Instead of trying to match devices passed in based on the monitor
detecting the number of devices that were used in the domain
definition, use the deviceValidateCallback to evaluate if
unsupported devices are used.
This allows the compiler to detect when new device types are added
that need to be checked.
Signed-off-by: William Douglas <william.douglas@intel.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Originally qemuDomainAttachNetDevice() would wait until the cleanup at
the very end of the function to add newly hotplugged interfaces to the
domain's nets list. commit 7b8bec4560 modified it to add the new
interface to the nets list earlier (but not all the way at the
beginning of the function either, because there are some operations
(PCI address assignment in particular) that need the new device to not
yet be visible in the domaindef).
But hostdev interfaces short-circuit past most of the body of
qemuDomainAttachNetDevice() (since none of it applies to hostdev
interfaces). In the past that was okay, but since the line that adds
the new interface to the domaindef's nets list is in that "most of the
body", after that commit hotplugged hostdev interfaces are no longer
being properly added to the domaindef nets list, so they don't show up
in the status XML or the virsh domiflist output.
It really *is* important to add interfaces to the nets list earlier,
so we can't revert commit 7b8bec4560, and we also can't move the
insert to common code *earlier* in the function, so instead this patch
duplicates the VIR_APPEND_ELEMENT_COPY() just before the code path for
hostdev interfaces jumps to cleanup.
Resolves: https://bugzilla.redhat.com/1972468
Fixes: 7b8bec4560
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that the remote driver itself can probe for listening sockets /
running daemons, virtproxyd doesn't need to probe URIs itself. Instead
it can just delegate to the remote driver.
Tested-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
With the traditional libvirtd, the virConnectOpen call will probe active
drivers server side to find which one to use when the URI is NULL/empty.
With the modular daemons though, the remote client does not know which
daemon to connect in the first place, so we can't rely on virConnectOpen
probing. Currently the virtproxyd daemon has code to probe for a
possible driver by looking at which sockets are listening or which
binaries are installed. The remote client can thus connect to virtproxyd
which in turn can connect to a real hypervisor driver.
The virtproxyd probing code though isn't something that needs to live in
virtproxyd. By moving it into the remote client we can get probing
client side in all scenarios and avoid the extra trip via virtproxyd in
the common case.
Tested-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When virtproxyd gets a NULL URI, it needs to implement probing logic
similar to that found in virConnectOpen. The latter can't be used
directly since it relied on directly calling into the internal drivers
in libvirtd. virtproxyd approximates this behaviour by looking to see
what modular daemon sockets exist, or what daemon binaries are installed.
This same logic is also going to be needed when the regular libvirt
remote client switches to prefer modular daemons by default, as we
don't want to continue spawning libvirtd going forward.
Tested-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The libxl driver supports xen:///system URLs and the daemon socket
uses 'virtxend' as the socket prefix.
Reported-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When writing the memory snapshot into an existing file don't remove it
if the snapshot fails later.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'file' is too generic to know what's going on. Rename it to
'memorysnapshotfile'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the snapshot disk type from the definition now that we validate that
it matches.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The code executed later when creating a snapshot makes all decisions
based on the configured type rather than the actual type of the existing
file, while the check whether the file exists is based solely on the
on-disk type.
Since a block device is allowed to exist even when not reusing existing
files in contrast to regular files this creates a potential for a block
device to squeak past the check but then be influenced by other code
executed later. Specifically this is a problem when creating a snapshot
with the following XML:
<domainsnapshot>
<disks>
<disk name='vdb' type='file'>
<source file='/dev/sdb'/>
</disk>
</disks>
</domainsnapshot>
If the snapshot creation fails, '/dev/sdb' will be removed because it's
considered to be a regular file by the cleanup code.
Add a check that will force that the configured type matches the on-disk
state.
Additional supporting reason is that qemu stopped to accept block
devices with the 'file' backend, thus the above configuration will not
work any more. This allows us to fail sooner.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1972145
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In case when the snapshot target is of VIR_STORAGE_TYPE_BLOCK type and
doesn't exist libvirt won't be able to create it. Reject such a config
sooner.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Separate the 'else if' branches into nested conditions so that it's more
obvious when we'll be adding additional checks later.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virQEMUCapsFillDomainDeviceGraphicsCaps fills data needed both for
validation of the graphics type and also for correct display in the
(dom)capablities XML.
Signal the support for egl-headless only when qemu has the capability.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
egl-headless graphics can be compiled out in qemu so we need to be able
to know whether the given qemu version support it.
Base the capability on the presence of the 'egl-headless' member in
'query-display-options' or imply it if 'query-display-options' is not
supported as we implied it before for all versions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
The DAC security driver has an option to register a callback that
is called instead of chown(). So far QEMU is the only user of
this feature and it's used to set labels on non-local disks (like
gluster), where exists notion of owners but regular chown() can't
be used.
However, this callback (if set) is called always, even for local
disks. And thus the QEMU's implementation duplicated parts of the
DAC driver to deal with chown().
If the DAC driver would call the callback only for non-local
disks then the QEMU's callback can be shorter.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
I must admit, I have no idea why we build such POSIX dependent
code as DAC driver for something such not POSIX as WIN32. Anyway,
the code which is supposed to set error is not doing that. The
proper way is to mimic what chown() does:
On error, -1 is returned, and errno is set to indicate the error.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As shown in the previous commit, @path can be NULL. However, in
that case @src->path is also NULL. Therefore, trying to "fix"
@path to be not NULL is not going to succeed. The real value of
NULLSTR() is in providing a non-NULL string for error reporting.
Well, that can be done in the error reporting without overwriting
argument.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The virSecurityDACSetOwnershipInternal() function accepts two
arguments (among others): @path and @src. The idea being that in
some cases @path is NULL and @src is not and then @path is filled
from @src->path. However, this is done in both callers already
(because of seclabel remembering/recall). Therefore, this code in
virSecurityDACSetOwnershipInternal() is dead, effectively.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The virSecurityDACSetOwnershipInternal() has two callers and in
both the private data (@priv) is obtained via
virSecurityManagerGetPrivateData(). But in case of DAC driver the
private data can never be NULL. This is because the private data
is allocated in virSecurityManagerNewDriver() according to
.privateDataLen attribute of secdriver. In case of DAC driver the
attribute is set to sizeof(virSecurityDACData).
NB, no other function within DAC driver checks for !priv.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce a function that frees individual items on the chown
list and declare and use g_autoptr() for it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When adding support for externally launched virtiofsd,
I was too liberal and did not require a target.
But the target is required, because it's passed to the
QEMU device, not to virtiofsd.
https://bugzilla.redhat.com/show_bug.cgi?id=1969232
Fixes: 12967c3e13
Fixes: 56dcdec1ac
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The NVRAM label is set in qemuSecuritySetAllLabel(). There's no
need to set its label upfront. In fact, setting it twice creates
an imbalance because it's unset only once which mangles seclabel
remembering. However, plain removal of the
qemuSecurityDomainSetPathLabel() undoes the fix for the original
bug (when dynamic ownership is off then the NVRAM is not created
with cfg->user and cfg->group but as root:root). Therefore, we
have to switch to virFileOpenAs() and pass cfg->user and
cfg->group and VIR_FILE_OPEN_FORCE_OWNER flag. There's no need to
pass VIR_FILE_OPEN_FORCE_MODE because the file will be created
with the proper mode.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1969347
Fixes: bcdaa91a27
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
126db34a81 had previously switched various
flows over to this from VIR_ERR_OPERATION_FAILED.
This change simply does the same for qemuDomainDetachPrepDisk,
qemuDomainDetachPrepInput and qemuDomainDetachPrepVsock to allow
management apps to centralise their error handling on just
VIR_ERR_DEVICE_MISSING for missing devices during a detach.
Signed-off-by: Lee Yarwood <lyarwood@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
If given file is not found in $PATH then g_find_program_in_path()
returns NULL. However, g_canonicalize_filename() does not accept
NULL as input.
Fixes: 65c2901906
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Use automatic memory freeing for the string list so that we can remove
the cleanup section.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'rbd_image_spec_t' struct has two string members 'id' and
'name'. We only stole the 'name' members thus the 'id's as well as the
whole list would be leaked on success.
Restructure the code so that we copy out the image names and call
rbd_image_spec_list_cleanup on success rather than on error.
The error path is then handled by using g_autofree for 'images'.
Since we no longer have a error path after allocating the returned
string list we can completely remove its cleanup.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The only caller doesn't care about the number of elements in the string
list so we don't have to calculate it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There's just one caller who cares (testQemuMonitorJSONGetTPMModels). Fix
it and remove the counting of elements.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This refactors multiple aspects of the function:
1) Use automatic memory freeing
2) Remove need to check element count in the returned arrays
3) Fixes questionable code linebreaks
4) Removes reuse of variables
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All callers pass in NULL-terminated string lists. Remove the 'nvalues'
argument and fix all callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All the capability getters which return a string list do in fact return
a NULL-terminated list so we can use g_auto(GStrv) to free it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use automatic memory clearing to simplify the control flow.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use automatic memory clearing to simplify the control flow.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use automatic memory clearing and remove the cleanup section.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use 'g_autoptr' for the two temporary JSON objects and remove the
cleanup section.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virQEMUCapsFillDomainDeviceGraphicsCaps fills data needed both for
validation of the graphics type and also for correct display in the
(dom)capablities XML.
Signal the support for SDL only when qemu has the capability.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
SDL graphics can be compiled out in qemu so we need to be able to know
whether the given qemu version support it.
Base the capability on the presence of the 'sdl' member in
'query-display-options' or imply it if 'query-display-options' is not
supported as we implied it before for all versions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
The command allows to query various display-related options. The absence
of the command will be used to imply certain video-related capabilities
before we would be able to detect them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
IOThreads are supported with all 3 currently supported buses which can
have virtio devices (PCI, CCW, MMIO) , so there's no need for this check.
Additionally this check was buggy in the current location as on e.g.
hotplug cases the address may not yet be assigned for the disk and thus
a bogus error would be printed.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1970277
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For validation of explicitly configured addresses we already ported the
same style of checks to qemuValidateDomainDeviceDefAddress and implicit
address assignment should do the right thing in the first place, thus
the function is redundant and can be removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Base the check on the logic from qemuDomainCheckCCWS390AddressSupport,
which will be removed later.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We don't support any qemu which would support the 'virtio-s390'
addressing, thus we can drop all code related to it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
