Right now, ssh network disks are not usable. There is some basic support
in libvirt that is meant to support disk chains that have backing disks
located at ssh urls, but there is no real way for a user to configure a
ssh-based disk. This commit allows users to configure an ssh disk with
password authentication. Implementation will follow.
<disk type='network'>
<source protocol='ssh' ...>
<auth username='myusername'>
<secret type='iscsi' usage='secretname'/>
</auth>
</disk>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When using nbdkit to serve a network disk source, the nbdkit process
will start and wait for an nbd connection before actually attempting to
connect to the (remote) disk location. Because of this, nbdkit will not
report an error until after qemu is launched and tries to read from the
disk. This results in a fairly user-unfriendly error saying that qemu
was unable to start because "Requested export not available".
Ideally we'd like to be able to tell the user *why* the export is not
available, but this sort of information is only available to nbdkit, not
qemu. It could be because the url was incorrect, or because of an
authentication failure, or one of many other possibilities.
To make this friendlier for users and easier to detect
misconfigurations, try to connect to nbdkit immediately after starting
nbdkit and before we try to start qemu. This requires adding a
dependency on libnbd. If an error occurs when connecting to nbdkit, read
back from the nbdkit error log and provide that information in the error
report from qemuNbdkitProcessStart().
User-visible change demonstrated below:
Previous error:
$ virsh start nbdkit-test
2023-01-18 19:47:45.778+0000: 30895: error : virNetClientProgramDispatchError:172 : internal
error: process exited while connecting to monitor: 2023-01-18T19:47:45.704658Z
qemu-system-x86_64: -blockdev {"driver":"nbd","server":{"type":"unix",
"path":"/var/lib/libvirt/qemu/domain-1-nbdkit-test/nbdkit-libvirt-1-storage.socket"},
"node-name":"libvirt-1-storage","auto-read-only":true,"discard":"unmap"}: Requested export not
available
error: Failed to start domain 'nbdkit-test'
error: internal error: process exited while connecting to monitor: 2023-01-18T19:47:45.704658Z
qemu-system-x86_64: -blockdev {"driver":"nbd","server":{"type":"unix",
"path":"/var/lib/libvirt/qemu/domain-1-nbdkit-test/nbdkit-libvirt-1-storage.socket"},
"node-name":"libvirt-1-storage","auto-read-only":true,"discard":"unmap"}: Requested export not
available
After this change:
$ virsh start nbdkit-test
2023-01-18 19:44:36.242+0000: 30895: error : virNetClientProgramDispatchError:172 : internal
error: Failed to connect to nbdkit for 'http://localhost:8888/nonexistent.iso': nbdkit: curl[1]:
error: problem doing HEAD request to fetch size of URL [http://localhost:8888/nonexistent.iso]:
HTTP response code said error: The requested URL returned error: 404
error: Failed to start domain 'nbdkit-test'
error: internal error: Failed to connect to nbdkit for 'http://localhost:8888/nonexistent.iso]:
error: problem doing HEAD request to fetch size of URL [http://localhost:8888/nonexistent.iso]:
HTTP response code said error: The requested URL returned error: 404
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Adds the ability to monitor the nbdkit process so that we can take
action in case the child exits unexpectedly.
When the nbdkit process exits, we pause the vm, restart nbdkit, and then
resume the vm. This allows the vm to continue working in the event of a
nbdkit failure.
Eventually we may want to generalize this functionality since we may
need something similar for e.g. qemu-storage-daemon, etc.
The process is monitored with the pidfd_open() syscall if it exists
(since linux 5.3). Otherwise it resorts to checking whether the process
is alive once a second. The one-second time period was chosen somewhat
arbitrarily.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Since the restart handler will trigger at an arbitrary time (when the
nbdkit process crashes, for instance), it's difficult to provide
feedback to the user if the restart is unsuccessful. Rather than just
relying on a warning in the log, taint the domain so that there will be
a slightly more user-visible notification.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
We were testing the arguments that were being passed to qemu when a disk
was being served by nbdkit, but the arguments used to start nbdkit
itself were not testable. This adds a test to ensure that we're invoking
nbdkit correctly for various disk source definitions.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Add a private function to peek at the list of send buffers in virCommand
so that it is testable
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
For virStorageSource objects that contain an nbdkitProcess, start that
nbdkit process to serve that network drive and then pass the nbdkit
socket to qemu rather than sending the network url to qemu directly.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Rather than passing passwords and cookies (which could contain
passwords) to nbdkit via commandline arguments, use the alternate format
that nbdkit supports where we can specify a file descriptor which nbdkit
will read to get the password or cookies.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
All users of virCommandSetSendBuffer() are using it to send sensitive
data to a child process. So, since these buffers contain sensitive
information, clear it with virSecureErase().
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Add xml to the private data for a disk source to represent the nbdkit
process so that the state can be re-created if the libvirt daemon is
restarted. Format:
<nbdkit>
<pidfile>/path/to/nbdkit.pid</pidfile>
<socketfile>/path/to/nbdkit.socket</socketfile>
</nbdkit>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This prepares encryption secrets and authentication secrets. When we add
nbdkit-backed network storage sources, we will not need to send
authentication secrets to qemu, since they will be sent to nbdkit
instead. So split this into two different functions.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Add new DO_TEST_CAPS_LATEST_NBDKIT macro to test xml2argv for various
nbdkit capability scenarios.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
log stderr and stdout from nbdkit into its own log so that
nbdkit-related issues can be debugged more easily.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This code can be used by the nbdkit implementation for reading back
filtered log data for error reporting. Move it to qemuLogContext so that
it can be shared. Renamed to qemuLogContextReadFiltered().
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This will allow us to use it for nbdkit logging in upcoming commits.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Allow to specify a basename for the log file so that
qemuDomainLogContextNew() can be used to create log contexts for
secondary loggers.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Add some helper functions to build a virCommand object and run the
nbdkit process for a given virStorageSource.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Rather than hard-coding the nbdkit module directory, query the nbdkit
binary for the location to these directories. nbdkit provides a
--dump-config optiont that outputs this information and can be easily
parsed. We can also get the version from this output rather than
executing `nbdkit --version` separately.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
An object for storing information about a nbdkit process that is serving
a specific virStorageSource. At the moment, this information is just
stored in the private data of virStorageSource and not used at all.
Future commits will use this data to actually start a nbdkit process.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Add the virFileCache implementation for nbdkit capabilities to the qemu
driver. This allows us to determine whether nbdkit is installed and
which plugins are supported. it also has persistent caching and the
capabilities are re-queried whenever something changes.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Implement the loadFile and saveFile virFileCacheHandlers callbacks so
that nbdkit capabilities are cached perstistently across daemon
restarts. The format and implementation is modeled on the qemu
capabilities, but simplified slightly.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Preparatory step for caching nbdkit capabilities. This patch implements
the newData and isValid virFileCacheHandlers callback functions.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Since the libvirt documentation suggests to prefer GObject over
virObject, and since virObject is a GObject, change virFileCache to
allow GObjects as data.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In order to add caching of the nbdkit capabilities, we will need to
compare against file modification times, etc. So look up this
information when creating the nbdkit caps.
Add a nbdkit_moddir build option to allow the builder to specify the
location to look for nbdkit plugins and filters.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In future commits, we will optionally use nbdkit to serve some remote
disk sources. This patch queries to see whether nbdkit is installed on
the host and queries it for capabilities. The data will be used in later
commits.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
There was support in the code for parsing protocol='ssh' on network disk
sources, but it was not present in the xml schema. Add this to the
schema.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When Domain-0 autoballooning is enabled, it's possible that memory may
need to be ballooned down in Domain-0 to accommodate the needs of another
virtual machine. libxlDomainFreeMemory handles this task, but due to a
logic bug is underflowing the variable containing Domain-0 new
target memory. The resulting huge numbers are filtered by
libxlSetMemoryTargetWrapper and memory is not changed.
Under the covers, libxlDomainFreeMemory uses Xen's libxl_set_memory_target
API, which includes a 'relative' parameter for specifying how to set the
target. If true, the target is an increment/decrement value over the
current memory, otherwise target is taken as an absolute value.
libxlDomainFreeMemory sets 'relative' to true, but never allows for
negative values by declaring the target memory variable as an unsigned.
Fix by declaring the variable as signed, which also requried adjusting
libxlSetMemoryTargetWrapper.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Running outside of GitLab will likely not have the variable set and
hence the execution would fail. To make sure we always start with a
clean scratch dir (which may or may not be the best thing), create it
with 'mktemp'. The main reason for a temporary directory is to ensure a
clean environment for the job every time run_integration function is
run. For repeated interactive use case, it is imperative that the
developer takes care of their environment.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
One advantage that GitLab's YAML has with Shell commands is that every
single line is printed out as is, including control structures. In
order to see whether the logic did the same thing and the tests are
going to operate on the right set of daemons (monolithic vs modular),
lets print the DAEMONS variable that we set depending on the distro we
execute the tests on.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Unfortunately, once we go down the line of running our own scripts as
part of GitLab CI jobs rather than open coding Shell in YAML, we lose
the benefit of seeing each line the script executes. The downside of
the default YAML however is that we have to maintain the same piece of
code on 2 places in that case. Let's adopt what we use with other
container jobs and prefix each shell command with 'run_cmd' or
'run_cmd_quiet' which will dump it in the logs before executing.
Flow control expressions and structures are a problem though in this
regard, so let's just print some important values for debugging
purposes.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We've started using the run_cmd helper function to log what kind of
command is being executed as well as actually executing the command.
The problem however is doing I/O redirections for commands which we
don't wish to see any output for whatever reason. Now, if the
redirection is applied at parameter passing to run_cmd it's going to be
applied to the debug print as well. Let's introduce another helper,
run_cmd_quiet which takes care of the I/O redirection and executes the
command completely silently.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Neither '&>' nor 'source' are defined in POSIX.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Because of the nature of writing inline shell commands to YAML, most of
the commentaries where inlined with the command not to hinder YAML
readability any further. Since we moved the logic to a standalone
script, we can now do whatever formatting & readability adjustments we
want.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We've not been interested in any extra output from the command at all
since we always redirected both stdout and stderr to /dev/null. Future
patch will change that slightly, so --quiet will start making sense.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We needed v98.0 in commit c9a65eb8 due to a bug in Avocado in the past
and have been installing the latest Avocado for a while since commit
91774931, yet we kept the comment by a mistake.
Besides, looks like v98.0 ignores the avocado.config file in the TCK
repo instructing it to run the test suite sequentially leading to test
stability issues, so abandoning the v98.0 in commit 91774931 was a good
thing in the end.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Since the section now only consists of a single command, we can happily
move the command to the main integration template job body.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
All supported versions of Fedora and CentOS Stream 9 default to modular
setup, it's probably better if we cosmetically adjust the CentOS Stream
version check to make it explicit that monolithic daemon services ought
to be started only on Stream 8.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Follow what's been done to other jobs in .gitlab-ci.yml and extract the
shell logic from YAML to a function in ci/jobs.sh
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Apparently we've only had it because the -[ao] options weren't portable
at the time, but according to
https://pubs.opengroup.org/onlinepubs/9699919799/utilities/test.html
both are defined in POSIX.1-2017 revision which is old enough for all
our supported platforms to have adopted it already, so we can drop the
check. However, the above has also marked -[ao] as obsolescent stating
that:
"[OB] Obsolescent
The functionality described may be removed in a future version of
this volume of POSIX.1-2017. Strictly Conforming POSIX Applications
and Strictly Conforming XSI Applications shall not use obsolescent
features."
It is however unlikely that the shell implementations would drop
support for -[ao] despite POSIX potentially removing them.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
There are few places where the following pattern occurs:
if (var)
other = g_strdup(var);
where @other wasn't initialized before g_strdup(). Checking for
var != NULL is useless in this case, as that's exactly what
g_strdup() does (in which case it returns NULL).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: K Shiva Kiran <shiva_kr@riseup.net>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Adds two new private methods to create metadata change events:
- virNetworkEventMetadataChangeNewFromNet()
- virNetworkEventMetadataChangeNewFromObj()
Signed-off-by: K Shiva Kiran <shiva_kr@riseup.net>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When changing the metadata via virNetworkSetMetadata(), we can
now emit an event to notify the app of changes. This is useful
when co-ordinating different applications read/write of custom
metadata.
Signed-off-by: K Shiva Kiran <shiva_kr@riseup.net>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When making 'type' member of virDomainControllerDef to be of
virDomainControllerType rather than an int I forgot to update
bhyve_command.c.
Fixes: 27a653b893
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Inside of virDomainDiskSourceNVMeParse() we have
virXMLPropString() + virStrToLong_ull() combo. Switch to
virXMLPropULongLong() which does the same thing.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
