Remove cleanup sections that are no longer needed, as well
as unnecessary 'ret' variables.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Do not use 'arg' which is later used for an allocated string.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Instead of using the same variable to store either a const pointer
or an allocated string, always make a copy.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Use virAppendElement instead of virInsertElementsN to implement
VIR_APPEND_ELEMENT which allows us to remove error handling as the
only relevant errors were removed when switching to aborting memory
allocation functions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When we dropped virDomainSetMemory usage it got kind of tricky to
figure out the flags correctly.
Originally the logic was following:
no option | --current | --live | --config | --live --config
----------+-----------+--------+----------+----------------
LIVE | CURRENT | LIVE | CONFIG | LIVE & CONFIG
But after the commit removing virDomainSetMemory usage it changed to:
no option | --current | --live | --config | --live --config
----------+-----------+--------+-----------------+----------------
LIVE | CURRENT | LIVE | LIVE & CONFIG | LIVE & CONFIG
This commit fixes the logic back to the original behavior except for
ESX, HyperV and Virtuozzo drivers where virDomainSetMemory() default
behavior was CURRENT instead of LIVE.
Fixes: ce8138564b
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1980199
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Allow the tree view with --all so that we can see all inactive mdevs in
a tree structure nested under their parent devices.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
According to definition of virDomainCoreDumpFormat, the "elf" should be
the first argument in VIR_ENUM_*.
Fixes: 84cc4543be
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1981625
Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In a few places it may happen that the array we want to sort is
still NULL (e.g. because there were no leases found, no paths for
secdriver to lock or no cache banks). However, passing NULL to
qsort() is undefined and even though glibc plays nicely we
shouldn't rely on undefined behaviour.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
virt-host-validate should print "Checking for device assignment IOMMU
support" for all architectures, not only for Intel / AMD.
This is the output without the patch:
```
[fidencio@dentola libvirt]$ virt-host-validate
QEMU: comprobando if device /dev/kvm exists : PASA
QEMU: comprobando if device /dev/kvm is accessible : PASA
QEMU: comprobando if device /dev/vhost-net exists : PASA
QEMU: comprobando if device /dev/net/tun exists : PASA
QEMU: comprobando for cgroup 'cpu' controller support : PASA
QEMU: comprobando for cgroup 'cpuacct' controller support : PASA
QEMU: comprobando for cgroup 'cpuset' controller support : PASA
QEMU: comprobando for cgroup 'memory' controller support : PASA
QEMU: comprobando for cgroup 'devices' controller support : ADVERTENCIA (Enable 'devices' in kernel Kconfig file or mount/enable cgroup controller in your system)
QEMU: comprobando for cgroup 'blkio' controller support : PASA
ADVERTENCIA (Unknown if this platform has IOMMU support)
QEMU: comprobando for secure guest support : ADVERTENCIA (Unknown if this platform has Secure Guest support)
```
This is the output with the patch:
```
[fidencio@dentola libvirt]$ ./build/tools/virt-host-validate
QEMU: Checking if device /dev/kvm exists : PASS
QEMU: Checking if device /dev/kvm is accessible : PASS
QEMU: Checking if device /dev/vhost-net exists : PASS
QEMU: Checking if device /dev/net/tun exists : PASS
QEMU: Checking for cgroup 'cpu' controller support : PASS
QEMU: Checking for cgroup 'cpuacct' controller support : PASS
QEMU: Checking for cgroup 'cpuset' controller support : PASS
QEMU: Checking for cgroup 'memory' controller support : PASS
QEMU: Checking for cgroup 'devices' controller support : WARN (Enable 'devices' in kernel Kconfig file or mount/enable cgroup controller in your system)
QEMU: Checking for cgroup 'blkio' controller support : PASS
QEMU: Checking for device assignment IOMMU support : WARN (Unknown if this platform has IOMMU support)
QEMU: Checking for secure guest support : WARN (Unknown if this platform has Secure Guest support)
```
Signed-off-by: Fabiano Fidêncio <fabiano@fidencio.org>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Previous patches rendered 'return 0' at the end of the function a
dead code. Therefore, the code can be rearranged a bit and the
line can be dropped.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Fabiano Fidêncio <fabiano@fidencio.org>
Ideally, every virHostMsgFail() would be coupled with
VIR_HOST_VALIDATE_FAILURE() so that the failure is correctly
propagated to the caller. However, in
virHostValidateSecureGuests() we are either ignoring @level and
returning 0 directly (no error), or not returning at all, relying
on 'return 0' at the end of the function. Neither of these help
propagate failure correctly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Fabiano Fidêncio <fabiano@fidencio.org>
When validating secure guests support on s390(x) we may read
/proc/cmdline and look for "prot_virt" argument. Reading the
kernel command line is done via virFileReadValueString() which
may fail. In such case caller won't see any error message. But we
can produce the same warning/error as if "prot_virt" argument
wasn't found. Not only this lets users know about the problem,
it also terminates the "Checking for ...." line correctly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Fabiano Fidêncio <fabiano@fidencio.org>
As a part of its checks, virt-host-validate calls virCgroupNew()
to detect CGroup controllers which are then printed out. However,
virCgroupNew() can fail (with appropriate error message set).
Let's print an error onto stderr if that happens.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Fabiano Fidêncio <fabiano@fidencio.org>
Several libvirt functions are called from virt-host-validate.
Some of these functions do report an error on failure. But
reporting an error is coupled with freeing previous error (by
calling virResetError()). But we've never called
virErrorInitialize() and thus resetting error object frees some
random pointer.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Fabiano Fidêncio <fabiano@fidencio.org>
Currently `virt-host-validate` will fail whenever one of its calls fail,
regardless of virHostValidateLevel set.
This behaviour is not optimal and makes it not exactly reliable as a
command line tool as other tools or scripts using it would have to check
its output to figure out whether something really failed or if a warning
was mistakenly treated as failure.
With this change, the behaviour of whether to fail or not, is defined by
the caller of those functions, based on the virHostValidateLevel passed
to them.
https://gitlab.com/libvirt/libvirt/-/issues/175
Signed-off-by: Fabiano Fidêncio <fabiano@fidencio.org>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Cloud-Hypervisor is a KVM virtualization using hypervisor. It
functions similarly to qemu and the libvirt Cloud-Hypervisor driver
uses a very similar structure to the libvirt driver.
The biggest difference from the libvirt perspective is that the
"monitor" socket is seperated into two sockets one that commands are
issued to and one that events are notified from. The current
implementation only uses the command socket (running over a REST API
with json encoded data) with future changes to add support for the
event socket (to better handle shutdowns from inside the VM).
This patch adds support for the following initial VM actions using the
Cloud-Hypervsior API:
* vm.create
* vm.delete
* vm.boot
* vm.shutdown
* vm.reboot
* vm.pause
* vm.resume
To use the Cloud-Hypervisor driver, the v15.0 release of
Cloud-Hypervisor is required to be installed.
Some additional notes:
* The curl handle is persistent but not useful to detect ch process
shutdown/crash (a future patch will address this shortcoming)
* On a 64-bit host Cloud-Hypervisor needs to support PVH and so can
emulate 32-bit mode but it isn't fully tested (a 64-bit kernel and
32-bit userspace is fine, a 32-bit kernel isn't validated)
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: William Douglas <william.douglas@intel.com>
Some of our really old APIs are missing @flags argument. We
introduced their variants with "Flags" suffix and wired some
logic into virsh to call the new variant only if necessary. This
enables virsh to talk to older daemon which may be lacking new
APIs.
However, in case of cmdSetmem() we are talking about v0.1.1
(virDomainSetMemory()) vs. v0.9.0 (virDomainSetMemoryFlags()) and
in case of cmdSetmaxmem() we are talking about v0.0.3
(virDomainSetMaxMemory()) vs v0.9.0 (virDomainSetMemoryFlags()).
Libvirt v0.9.0 was released more than 10 years ago and recently
we dropped support for RHEL-7 which has v4.5.0 (released ~3 years
ago). Thus it is not really necessary to have support in virsh
for such old daemons.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
None of them are currently needed to pass our upstream CI, most were
either for ancient clang versions or coverity for silencing false
positives.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
They were added mostly randomly and we don't really want to keep working
around of false positives.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In previous commit the virDomainCoreDumpWithFormat() API gained
new format. Expose it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
These functions initialize @ret to true and only after something
fails either they call cleanup code (which consists only from
virshDomainFree()) and return false, or they set ret = false and
carry on (when the failure occurred close to cleanup code).
Switch them to the usual pattern in which ret is initialized to
failure, goto cleanup is used and ret is set to true only after
everything succeeded.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In my commit of v7.1.0-rc1~376 I've simplified the logic of
handling @flags. My assumption back then was that calling
virDomainSetMemory() is equivalent to
virDomainSetMemoryFlags(flags = 0). But that is not the case,
because it is equivalent to virDomainSetMemoryFlags(flags =
VIR_DOMAIN_AFFECT_LIVE). Fix the condition that calls the old
API.
Fixes: b5e267e8c5
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1961118
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
