I added new driver functions to handle creating network with
given flags. I also replaced definitions of the functions without
flags with function calls to the new ones.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This new API creates network with given flags.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The ACPI index of a device in a running guest can't be modified, and
libvirt doesn't actually attempt to modify it, but it was possible for
a user to request such a modification, and libvirt wouldn't complain,
thus misleading the user into thinking that it had actually been changed.
Resolves: https://bugzilla.redhat.com/1998920
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The next patch will add another check similar to the existing check
for a change in alias name. This patch reformats the code in
preparation so that the next patch's purpose will be clear.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In fact keeping the VM around for debugging is a desirable configuration
and actually the implementation has no code as we keep the VM around.
Remove the validation and add a note that it's actually used.
Fixes: b1b85a475f
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Launch swtpm(8) with the --terminate switch, which guarantees that
the daemon will shut itself down when QEMU dies (current behavior).
We had so far been getting this "for free" (i.e. without --terminate)
due to a defect in upstream's connection handling logic [1], on which
libvirt should not rely since it will eventually be fixed. Adding
--terminate preserves and guarantees the current behavior.
[1] https://github.com/stefanberger/swtpm/pull/509
Signed-off-by: Nick Chevsky <nchevsky@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The array of virtual functions @vfs in
virNodeDeviceGetPCISRIOVCaps() is allocated twice: the first time
during its declaration and the second time inside
virPCIGetVirtualFunctions() which leads to a memleak:
==16691== 1,128 bytes in 47 blocks are definitely lost in loss record 1,771 of 1,803
==16691== at 0x4844CC1: calloc (vg_replace_malloc.c:1117)
==16691== by 0x4E50070: g_malloc0 (in /usr/lib64/libglib-2.0.so.0.6800.3)
==16691== by 0x4A7B034: virNodeDeviceGetPCISRIOVCaps (node_device_conf.c:2649)
==16691== by 0x4A7B5E2: virNodeDeviceGetPCIDynamicCaps (node_device_conf.c:2762)
==16691== by 0xA7F6E18: udevProcessPCI (node_device_udev.c:418)
Fixes: c97518d9b8
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Implement these new API functions in the nodedev driver.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
These two public APIs are implemented for almost all other objects that
have a concept of persistent definition and activatability. Now that we
have node devices (mdevs) that can be defined and inactive, it will be
useful to query the persistent/active state of node devices as well.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This will allow persistent mediated devices to be configured to be
restarted automatically when the host reboots.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When libxlAutostartDomain was introduced with commit fb92307f0d, one hunk
mistakenly added a call site in libxlStateReload. Domains should not be
autostarted when reloading the driver, so remove the offending hunk.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
On reload, the libxl driver calls virDomainObjListLoadAllConfigs to load
all configs from /etc/libvirt/libxl/ but incorrectly passes 'true' for
the liveStatus parameter, resulting in error messages such as
libvirtd[21053]: XML error: unexpected root element <domain>, expecting <domstatus>
libvirtd[21053]: Failed to load config for domain 'sles15sp3'
Fix by not requesting live status when re-reading the persistent VM config
files.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
On Xen, libvirt runs in a VM (typically dom0) and does not have an accurate
picture of numa and cpu topology of the underlying physical machine using
the "usual" mechanisms. numa info and cpu toplogy are retrieved from libxl
and used to populate the libvirt conterparts. Commit 7b79ee2f78 introduced
support for reporting die_id in capabilities, but did not account for
special handling of numa and cpu topology in libxl.
Currently, Xen does not report die_id in the libxl_cputopology structure.
In the meantime, set die_id to 0, which was suggested by the Xen developers
and is slightly better than random garbage such as
<cpu id='1' socket_id='0' die_id='-1073069552' core_id='0' siblings='0-1'/>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We don't need to propagate all public flags, only the information
about the presence of the validation one, which can differ from
function to function. This patch makes it easier and more
readable in case of a future additions of validation flags.
This change was suggested by Daniel.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We don't support all startup policies with all source types so to
correctly allow switching from a 'file' based cdrom with 'optional'
startup policy to a 'block' based one which doesn't support optional we
must update the startup policy field first. Obviously we need to have
fallback if the update fails.
Reported-by: Vojtech Juranek <vjuranek@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
'-qmp' in this case behaves the same as '-chardev' so it should have
been converted the same way as others were in 43c9c0859f since
short options are deprecated.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In the documentation to virDomainAttachDevice() we refer to a
non-existent virDomainUpdateDeviceFlag() function. The correct
name is virDomainUpdateDeviceFlags().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Since we no longer use '-device sga' we can stop probing for this device
in our capabilities code.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
SeaBIOS >= 1.11 has built-in support for outputting to the serial
console when QEMU sets -M graphics=off. Our minimum QEMU version
is 2.11.0, which bundled SeaBIOS 1.11. Thus we have no need to
use '-device sga' anymore.
This change results in a slight layout difference for option ROMs
in memory, however, it does not affect the migration data stream
format on the wire and once migration is complete the target QEMU
memory layout for ROMs matches the source QEMU once again.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The BIOS serial console output is currently implemented using the QEMU
'sga' device, but this is going to change in future patches, so the
error message ought to be more generically phrased.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The <bios useserial='yes'> config results in use of the '-device sga'
QEMU options. This in turn causes QEMU go load the sgabios.bin option
ROM, which contains x86 machine code. This cannot work on non-x86
arches, thus we should block the bad config.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When validation like deviceValidateCallback fails, the vm will not be
set and so the call to virDomainObjListRemove will be passed a NULL
pointer causing a segfault. To prevent this add a check that the vm is
defined before calling out to virDomainObjListRemove.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: William Douglas <william.douglas@intel.com>
Enable the handler function to find and open the console character
device that will be used by the console API.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: William Douglas <william.douglas@intel.com>
With the console and serial device handling fully functional, allow
the required device types to be specified in the domain
configuration.
The configuration only supports a single serial or console device.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: William Douglas <william.douglas@intel.com>
Add functionality to allow libvirt console to connect to the
cloud-hypervisor created PTY associated with a VM by updating the
domain with console path information. This has to be run after the VM
is created by cloud-hypervisor.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: William Douglas <william.douglas@intel.com>
Add function to build the the json structure to configure a PTY in
cloud-hypervisor.
The devices themselves still aren't allowed in configurations yet
though.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: William Douglas <william.douglas@intel.com>
The virCHMonitorGet function isn't going to be used outside of the
monitor, so remove the initial declaration and define the function
to be static.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: William Douglas <william.douglas@intel.com>
Now that virCHMonitorGet is capable of handling data returned by the
cloud-hypervisor API, make use of this via virCHMonitorGetInfo to call
into the vm.info endpoint.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: William Douglas <william.douglas@intel.com>
The virCHMonitorGet function needed to be able to return data from the
hypervisor. This functionality is needed in order for the driver to
support PTY enablement and getting details about the VM state.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: William Douglas <william.douglas@intel.com>
Add and initialize a virChrdevs to the _virCHDomainObjPrivate
structure in order to eventually track the consoles in use by a domain.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: William Douglas <william.douglas@intel.com>
The disk target is mandatory and used as a designator in error messages
of other validation steps, so we must validate it first.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The code rejecting a XML when the disk target is missing was moved to
the validation code which goes after post parse. One of the cases in the
disk post parse code didn't check whether 'disk->dst' is set which at
that point isn't guaranteed.
Fixes: 61fd7174c2
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2001627
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The validation infrastructure doesn't modify the definition and
additionally it makes sense to run the global code first as it's
validating certain corner cases.
The changed error messages from qemuxml2argvtest show that this is
indeed the proper ordering as all changed messages are actually better
describing the error.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
LUN disks are supported only by VMX and QEMU drivers and the VMX
implementation is a subset of qemu's implementation, thus we can move
the qemu-specific validator to the global validation code providing that
we allow the format to be 'none' (qemu driver always sets 'raw' if it's
not set) and allow disk type 'volume' as a source (qemu always
translates the source, and VMX doesn't implement 'volume' at all).
Moving the code to the global validation allows us to stop calling it
from the qemu specific validation and also deduplicates the checks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Introduced by:
commit 17322e5518
libxl: describe host cpu features based on hwcaps
with the justification that libxl_hwcaps does not have a stable
format across all version.
Even though the code would return '0' in the case of such failure,
it frees the 'cpu' pointer, while keeping it in caps->host.
Based on that, assume it does not happen in current usage.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
As well as the code probing for the version in libxlCapsInitHost.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Remove the code handling old Xen's hwcap words,
as well as the comment describing it.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Two users of virEventGLibAddSocketWatch care about the GSource
it returns.
The other three free it by assigning it to an autofreed variable.
Mark them with G_GNUC_UNUSED to make this obvious to the reader
and the compiler.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In the unlikely case that we were unable to set the new
identity, we would unref the old one even though it still
could be in the thread-local storage.
Fixes: c6825d8813
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Unused as of:
commit effeee5c2f
qemu: driver: Use 'qemuDomainSaveStatus' for saving status XML
This function extracts the config from the vm object, so the caller
no longer needs to do it.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
