Commit 723d5c (added after the release of 0.9.10) adds a
NetlinkEventClient for each interface sent to
virNetDevMacVLanCreateWithVPortProfile. This should only be done if
the interface actually *has* a virtPortProfile, otherwise the event
handler would be a NOP. The bigger problem is that part of the setup
to create the NetlinkEventClient is to do a memcpy of virtPortProfile
- if it's NULL, this triggers a segv.
This patch just qualifies the code that adds the client - if
virtPortProfile is NULL, it's skipped.
Qemu supports sizing by bytes; we shouldn't force the user to
round up if they really wanted an unaligned total size.
* include/libvirt/libvirt.h.in (VIR_DOMAIN_BLOCK_RESIZE_BYTES):
New flag.
* src/libvirt.c (virDomainBlockResize): Document it.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONBlockResize): Take
size in bytes.
* src/qemu/qemu_monitor_text.c (qemuMonitorTextBlockResize):
Likewise. Pass bytes, not megabytes, to monitor.
* src/qemu/qemu_driver.c (qemuDomainBlockResize): Implement new
flag.
No matter what cache mode is used, readonly disks are always safe wrt
migration. Shared disks are required to be readonly or to disable
host-side cache, which makes them safe as well.
A multi-threaded client with event loop may crash if one of its threads
closes a connection while event loop is in the middle of sending
keep-alive message (either request or response). The right place for it
is inside virNetClientIOEventLoop() between poll() and
virNetClientLock(). We should only close a connection directly if no-one
is using it and defer the closing to the last user otherwise. So far we
only did so if the close was initiated by keep-alive timeout.
Building virt-aa-helper with dtrace probes enabled, ldd complained about
undefined references:
./.libs/libvirt_util.a(libvirt_util_la-event_poll.o):(.note.stapsdt+0x24):
undefined reference to `libvirt_event_poll_purge_timeout_semaphore'
...
Lets say I got a volume with '1G' allocation and '10G' capacity. The
available space in the parent pool is '5G'. With the current check for
overcapacity, I can only try to resize to <= '6G'. You see the problem?
With an additional new bool added to determine whether or not to
discourage the use of the supplied MAC address by the bridge itself,
virNetDevTapCreateInBridgePort had three booleans (well, 2 bools and
an int used as a bool) in the arg list, which made it increasingly
difficult to follow what was going on. This patch combines those three
into a single flags arg, which not only shortens the arg list, but
makes it more self-documenting.
When a tap device for a domain is created and attached to a bridge,
the first byte of the tap device MAC address is set to 0xFE, while the
rest is set to match the MAC address that will be presented to the
guest as its network device MAC address. Setting this high value in
the tap's MAC address discourages the bridge from using the tap
device's MAC address as the bridge's own MAC address (Linux bridges
always take on the lowest numbered MAC address of all attached devices
as their own).
In one case within libvirt, a tap device is created and attached to
the bridge with the intent that its MAC address be taken on by the
bridge as its own (this is used to assure that the bridge has a fixed
MAC address to prevent network outages created by the bridge MAC
address "flapping" as guests are started and stopped). In this case,
the first byte of the mac address is *not* altered to 0xFE.
In the current code, callers to virNetDevTapCreateInBridgePort each
make the MAC address modification themselves before calling, which
leads to code duplication, and also prevents lower level functions
from knowing the real MAC address being used by the guest. The problem
here is that openvswitch bridges must be informed about this MAC
address, or they will be unable to pass traffic to/from the guest.
This patch centralizes the location of the MAC address "0xFE fixup"
into virNetDevTapCreateInBridgePort(), meaning 1) callers of this
function no longer need the extra strange bit of code, and 2)
bitNetDevTapCreateBridgeInPort itself now is called with the guest's
unaltered MAC address, and can pass it on, unmodified, to
virNetDevOpenvswitchAddPort.
There is no other behavioral change created by this patch.
Nuke the last vestiges of printing pid_t values with the wrong
types, at least in code compiled on mingw64. There may be other
places, but for now they are only compiled on systems where the
existing %d doesn't trigger gcc warnings.
* src/rpc/virnetsocket.c (virNetSocketNew): Use %lld and casting,
rather than assuming any particular int type for pid_t.
* src/util/command.c (virCommandRunAsync, virPidWait)
(virPidAbort): Likewise.
(verify): Drop a now stale assertion.
No thanks to 64-bit windows, with 64-bit pid_t, we have to avoid
constructs like 'int pid'. Our API in libvirt-qemu cannot be
changed without breaking ABI; but then again, libvirt-qemu can
only be used on systems that support UNIX sockets, which rules
out Windows (even if qemu could be compiled there) - so for all
points on the call chain that interact with this API decision,
we require a different variable name to make it clear that we
audited the use for safety.
Adding a syntax-check rule only solves half the battle; anywhere
that uses printf on a pid_t still needs to be converted, but that
will be a separate patch.
* cfg.mk (sc_correct_id_types): New syntax check.
* src/libvirt-qemu.c (virDomainQemuAttach): Document why we didn't
use pid_t for pid, and validate for overflow.
* include/libvirt/libvirt-qemu.h (virDomainQemuAttach): Tweak name
for syntax check.
* src/vmware/vmware_conf.c (vmwareExtractPid): Likewise.
* src/driver.h (virDrvDomainQemuAttach): Likewise.
* tools/virsh.c (cmdQemuAttach): Likewise.
* src/remote/qemu_protocol.x (qemu_domain_attach_args): Likewise.
* src/qemu_protocol-structs (qemu_domain_attach_args): Likewise.
* src/util/cgroup.c (virCgroupPidCode, virCgroupKillInternal):
Likewise.
* src/qemu/qemu_command.c(qemuParseProcFileStrings): Likewise.
(qemuParseCommandLinePid): Use pid_t for pid.
* daemon/libvirtd.c (daemonForkIntoBackground): Likewise.
* src/conf/domain_conf.h (_virDomainObj): Likewise.
* src/probes.d (rpc_socket_new): Likewise.
* src/qemu/qemu_command.h (qemuParseCommandLinePid): Likewise.
* src/qemu/qemu_driver.c (qemudGetProcessInfo, qemuDomainAttach):
Likewise.
* src/qemu/qemu_process.c (qemuProcessAttach): Likewise.
* src/qemu/qemu_process.h (qemuProcessAttach): Likewise.
* src/uml/uml_driver.c (umlGetProcessInfo): Likewise.
* src/util/virnetdev.h (virNetDevSetNamespace): Likewise.
* src/util/virnetdev.c (virNetDevSetNamespace): Likewise.
* tests/testutils.c (virtTestCaptureProgramOutput): Likewise.
* src/conf/storage_conf.h (_virStoragePerms): Use mode_t, uid_t,
and gid_t rather than int.
* src/security/security_dac.c (virSecurityDACSetOwnership): Likewise.
* src/conf/storage_conf.c (virStorageDefParsePerms): Avoid
compiler warning.
Commit 7c90026 added #include "conf/domain_conf.h" to
util/virrandom.c. Fortunately it didn't actually use anything from
domain_conf.h, since as far as I'm aware, files in util aren't allowed
to reference anything in conf (although the opposite is allowed). So
this #include is unnecessary.
I verified it still compiles with the line removed, but have placed a
one day moratorium on me doing any "trivial rule" pushes, so will
wait for someone else to verify/ACK before pushing.
This actually wires up the new optional parameter to block_stream:
http://wiki.qemu.org/Features/LiveBlockMigration/ImageStreamingAPI
The error checking is still sparse, since libvirt must not use
qemu-img or header probing on a qcow2 file in use by qemu to
check if the backing file name is valid; so for now, libvirt is
relying on qemu to diagnose an incorrect backing name. Fixing this
will require libvirt to track the entire backing file chain at the
time qemu is started and keeps it updated with snapshot and pull
operations.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONBlockJob): Add
parameter, and update callers.
* src/qemu/qemu_monitor_json.h (qemuMonitorJSONBlockJob): Update
signature.
* src/qemu/qemu_monitor.h (qemuMonitorBlockJob): Likewise.
* src/qemu/qemu_driver.c (qemuDomainBlockJobImpl): Update caller.
* src/qemu/qemu_monitor.c (qemuMonitorBlockJob): Likewise.
Block job commands are not part of upstream qemu until 1.1; and
proper support of job completion and cancellation depends on being
able to receive QMP events, which implies the JSON monitor.
Additionally, some early versions of block job commands were
backported to RHEL qemu, but these versions lacked asynchronous
job cancellation and partial block pull, so there are several
patches that will still be needed in this area of libvirt code
to support both flavors of block job commands.
Due to earlier patches in libvirt, we are guaranteed that all versions
of qemu that support block job commands already require libvirt to
use the JSON monitor. That means that the text version of block jobs
will not be used, and having to refactor two copies of the block job
handlers makes no sense. So instead, we delete the text handlers.
* src/qemu/qemu_monitor.c (qemuMonitorBlockJob): Drop text monitor
support.
* src/qemu/qemu_monitor_text.h (qemuMonitorTextBlockJob): Delete.
* src/qemu/qemu_monitor_text.c (qemuMonitorTextParseBlockJobOne)
(qemuMonitorTextParseBlockJob, qemuMonitorTextBlockJob):
Likewise.
Add de-association handling for 802.1qbg (vepa) via lldpad
netlink messages. Also adds the possibility to perform an
association request without waiting for a confirmation.
Signed-off-by: D. Herrendoerfer <d.herrendoerfer@herrendoerfer.name>
This code adds a netlink event interface to libvirt.
It is based upon the event_poll code and makes use of
it. An event is generated for each netlink message sent
to the libvirt pid.
Signed-off-by: D. Herrendoerfer <d.herrendoerfer@herrendoerfer.name>
In qemu there are 2 cpu models (cpu64-rhel5 and cpu64-rhel6) not
supported by libvirt. This patch adds the support with the flags
specifications from /usr/share/qemu-kvm/cpu-model/cpu-x86_64.conf
The only difference is that AMD-specific features are removed so
the processor type is not vendor-specific. Those features are either
emulated or ignored by qemu if host CPU doesn't support them.
This call to virDomainDeviceDefParse is both unnecessary (since
it will again be called at the top of the immediately following if(),
and if not there, then at the top of the if following that), but it
also creates a leak of one virDomainDeviceDef and one [whatever type
of device the DeviceDef is pointing to; probably a virDomainDiskDef]
in the case that the function has been called with
VIR_DOMAIN_DEVICE_MODIFY_CONFIG (the second parse will overwrite the
devicedef that was just created).
For any disk controller model which is not "lsilogic", the command
line will be like:
-drive file=/dev/sda,if=none,id=drive-scsi0-0-3-0,format=raw \
-device scsi-disk,bus=scsi0.0,channel=0,scsi-id=3,lun=0,i\
drive=drive-scsi0-0-3-0,id=scsi0-0-3-0
The relationship between the libvirt address attrs and the qdev
properties are (controller model is not "lsilogic"; strings
inside <> represent libvirt adress attrs):
bus=scsi<controller>.0
channel=<bus>
scsi-id=<target>
lun=<unit>
* src/qemu/qemu_command.h: (New param "virDomainDefPtr def"
for function qemuBuildDriveDevStr; new param "virDomainDefPtr
vmdef" for function qemuAssignDeviceDiskAlias. Both for
virDomainDiskFindControllerModel's use).
* src/qemu/qemu_command.c:
- New param "virDomainDefPtr def" for qemuAssignDeviceDiskAliasCustom.
For virDomainDiskFindControllerModel's use, if the disk bus is "scsi"
and the controller model is not "lsilogic", "target" is one part of
the alias name.
- According change on qemuAssignDeviceDiskAlias and qemuBuildDriveDevStr
* src/qemu/qemu_hotplug.c:
- Changes to be consistent with declarations of qemuAssignDeviceDiskAlias
qemuBuildDriveDevStr, and qemuBuildControllerDevStr.
* tests/qemuxml2argvdata/qemuxml2argv-pseries-vio-user-assigned.args,
tests/qemuxml2argvdata/qemuxml2argv-pseries-vio.args: Update the
generated command line.
* src/conf/domain_conf.h: Add new member "target" to struct
_virDomainDeviceDriveAddress.
* src/conf/domain_conf.c: Parse and format "target"
* Lots of tests (.xml) in tests/domainsnapshotxml2xmlout,
tests/qemuxml2argvdata, tests/qemuxml2xmloutdata, and
tests/vmx2xmldata/ are modified for newly introduced
attribute "target" for address of "drive" type.
KVM will be able to use a PCI SCSI controller even on POWER. Let
the user specify the vSCSI controller by other means than a default.
After this patch, the QEMU driver will actually look at the model
and reject anything but auto, lsilogic and ibmvscsi.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Osier Yang <jyang@redhat.com>
In qemuDomainAttachNetDevice, the guest's tap interface has only been
attached to the bridge if iface_connected is true. It's possible for
an error to occur prior to that happening, and previously we would
attempt to remove the tap interface from the bridge even if it hadn't
been attached.
QMP commands don't need to be escaped since converting them to json
also escapes special characters. When a QMP command fails, however,
libvirt falls back to HMP commands. These fallback functions
(qemuMonitorText*) do their own escaping, and pass the result directly
to qemuMonitorHMPCommandWithFd. If the monitor is in json mode, these
pre-escaped commands will be escaped again when converted to json,
which can result in the wrong arguments being sent.
For example, a filename test\file would be sent in json as
test\\file.
This prevented attaching an image file with a " or \ in its name in
qemu 1.0.50, and also broke rbd attachment (which uses backslashes to
escape some internal arguments.)
Reported-by: Masuko Tomoya <tomoya.masuko@gmail.com>
Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
This patch fixes console corruption, that happens if two concurrent
sessions are opened for a single console on a domain. Result of this
corruption was that each of the console streams recieved just a part
of the data written to the pipe so every console rendered unusable.
New helper function for safe console handling is used to establish the
console stream connection. This function ensures that no other libvirt
client is using the console (with the ability to disconnect consoles of
libvirt clients) and that no UUCP style lockfile is placed on the PTY
device.
* src/qemu/qemu_domain.h
- add data structure to domain's private data dealing with
console connections
* src/qemu/qemu_domain.c:
- allocate/free domain's console data structure
* src/qemu/qemu_driver.c
- use the new helper function for console handling
This patch adds a set of functions used in creating console streams for
domains using PTYs and ensures mutually exclusive access to the PTYs.
If mutually exclusive access is not used, two clients may open the same
console, which results in corruption on both clients as both of them
race to read data from the PTY.
Two approaches are used to ensure this:
1) Internal data structure holding open PTYs.
This is used internally and enables the user to forcibly
terminate another console connection eg. when somebody leaves
the console open on another host.
2) UUCP style lock files:
This uses UUCP lock files according to the FHS
( http://www.pathname.com/fhs/pub/fhs-2.3.html#VARLOCKLOCKFILES )
to check if other programs (like minicom) are not using the pty
device of the console.
This feature is disabled by default and may be enabled using
configure parameter
--with-console-lock-files=/path/to/lock/file/directory
or --with-console-lock-files=auto (which tries to infer the
location from OS used (currently only linux).
On usual linux systems, normal users may not write to the
/var/lock directory containing the locks. This poses problems
while in session mode. If the current user has no access to the
lockfile directory, check for presence of the file is still
done, but no lock file is created. This does NOT result in an
error.
This patch adds another callback to a FDstream object. The original
callback is used by the daemon stream driver to handle events.
This callback is called if and only if the stream is about to be closed.
This might be used to handle cleanup steps after a fdstream exits. This
will be used later on in ensuring mutually exclusive access to consoles.
* src/fdstream.c:
- emit the callback, when stream is being closed
- add data structures needed to handle the callback
- add function to register callback
* src/fdstream.h:
- define function prototypes for the callback
This patch causes the fdstream driver to call the stream event callback
if virStreamAbort() is called on a stream using this driver.
A remote handler for a stream can only detect changes via stream events,
so this event callback is necessary in order to enable a daemon to abort
a stream in such a way that the client will see the change.
* src/fdstream.c:
- modify close function to call stream event callback
This patch adds a set of flags to be used with the virDomainOpenConsole
API call to specify if the user wishes to interrupt an existing console
session or just to try open a new one.
VIR_DOMAIN_CONSOLE_SAFE - specifies that the console connection should
be opened only if the hypervisor supports
mutually exclusive access to console devices
VIR_DOMAIN_CONSOLE_FORCE - specifies that the caller wishes to interrupt
existing session and force a creation of a
new one.
This patch changes behavior of virPidFileRead to enable passing NULL as
path to the binary the pid file should be checked against to skip this
check. This enables using this function for reading files that have same
semantics as pid files, but belong to unknown processes.
using 'system-wakeup' monitor command. It is supported only in JSON,
as we are enabling it if possible. Moreover, this command is available
in qemu-1.1+ which definitely has JSON.
Function xmlParseURI does not remove square brackets around IPv6
address when parsing. One of the solutions is making wrappers around
functions working with xmlURI*. This assures that uri->server will be
always properly assigned and it doesn't have to be changed when used
on some new place in the code.
For this purpose, functions virParseURI and virSaveURI were
added. These function are wrappers around xmlParseURI and xmlSaveUri
respectively.
Also there is one new syntax check function to prohibit these functions
anywhere else.
File changes:
- src/util/viruri.h -- declaration
- src/util/viruri.c -- definition
- src/libvirt_private.syms -- symbol export
- src/Makefile.am -- added source and header files
- cfg.mk -- added sc_prohibit_xmlURI
- all others -- ID name and include fixes
The /usr/include/python/pyconfig.h file pollutes the global
namespace with a huge number of HAVE_XXX and WITH_XXX
defines. These change what we detected in our own config.h
In particular if you try to build without DTrace, python's
headers turn it back on with predictable fail.
THe hack to workaround this is to rename WITH_DTRACE to
WITH_DTRACE_PROBES to avoid the namespace clash
It's possible to disable SPICE TLS in qemu.conf. When this happens,
libvirt ignores any SPICE TLS port or x509 directory that may have
been set when it builds the qemu command line to use. However, it's
not ignoring the secure channels that may have been set and adds
tls-channel arguments to qemu command line.
Current qemu versions don't report an error when this happens, and try to use
TLS for the specified channels.
Before this patch
<domain type='kvm'>
<name>auto-tls-port</name>
<memory>65536</memory>
<os>
<type arch='x86_64' machine='pc'>hvm</type>
</os>
<devices>
<graphics type='spice' port='5900' tlsPort='-1' autoport='yes' listen='0' ke
<listen type='address' address='0'/>
<channel name='main' mode='secure'/>
<channel name='inputs' mode='secure'/>
</graphics>
</devices>
</domain>
generates
-spice port=5900,addr=0,disable-ticketing,tls-channel=main,tls-channel=inputs
and starts QEMU.
After this patch, an error is reported if a TLS port is set in the XML
or if secure channels are specified but TLS is disabled in qemu.conf.
This is the behaviour the oVirt people (where I spotted this issue) said
they would expect.
This fixes bug #790436
This patch adds support for vmx files with empty networkName
values (which is the case for vmx generated by Workstation).
It also adds support for vmx containing NATed network interfaces.
Update test suite accordingly
[forwarding this here from RH bug #796732]
When creating a network (virsh net-create) with an erroneous XML
containing an empty <name> element, the error message is misleading:
error: Failed to create network from foo.xml
error: missing domain name information
It took me a bit of time to figure out that it was the *network* name
that was missing (I generate this xml and didn't look at it, first).
I realized that the same message is used for missing name when creating
a domain, network, or device node.
