See also commit 66ff2dd, where we avoided installing these files
as executables.
* daemon/Makefile.am (libvirtd.service): Drop chmod.
* tools/Makefile.am (libvirt-guests.service): Likewise.
* src/Makefile.am (virtlockd.service, virtlockd.socket):
Likewise.
We had several different styles of .in conversion in our Makefiles:
ALLCAPS, @ALLCAPS@, @lower@, ::lower::
Canonicalize on one form, to make it easier to copy and paste
between .in files.
Also, we were using some non-portable sed constructs: \@ is an
undefined escape sequence (it happens to be @ itself in GNU sed,
but POSIX allows it to mean something else), as well as risky
behavior (failure to consistently quote things means a space
in $(sysconfdir) could throw things off; also, Autoconf recommends
using | rather than , or ! in the s||| operator, because | has to
be quoted in shell and is therefore less likely to appear in file
names than , or !).
Fix all of these uses to follow the same syntax.
* daemon/libvirtd.8.in: Switch to @var@.
* tools/virt-xml-validate.in: Likewise.
* tools/virt-pki-validate.in: Likewise.
* src/locking/virtlockd.init.in: Likewise.
* daemon/Makefile.am: Prefer | over ! in sed.
(libvirtd.8): Prefer consistent substitution.
(libvirtd.init, libvirtd.service): Avoid non-portable sed.
* tools/Makefile.am (libvirt-guests.sh, libvirt-guests.init)
(libvirt-guests.service): Likewise.
(virt-xml-validate, virt-pki-validate, virt-sanlock-cleanup):
Prefer consistent capitalization.
* src/Makefile.am (virtlockd.init, virtlockd.service)
(virtlockd.socket): Prefer consistent substitution.
For non-default connections (specified by the environment variable or
the command line option) we call virConnectOpenAuth without registering
the vshCatchDisconnect callback.
This calls vshReconnect instead which takes care of it.
Since we (ab)use vshReconnect for the default URI connection, if it
fails it might print 'Failed to reconnect to the hypervisor' even if we
were never connected before.
This changes it to only mention reconnection on the first try after
getting disconnected.
Most of this deals with moving the libvirt-guests.sh script which
does all the work to /usr/libexec, so it can be shared by both
systemd and traditional init. Previously systemd depended on
the script being in /etc/init.d
Required to fix https://bugzilla.redhat.com/show_bug.cgi?id=789747
Offline migration transfers inactive definition of a domain (which may
or may not be active). After successful completion, the domain remains
in its current state on source host and is defined but inactive on
destination host. It's a bit more clever than virDomainGetXMLDesc() on
source host followed by virDomainDefineXML() on destination host, as
offline migration will run pre-migration hook to update the domain XML
on destination host. Currently, copying non-shared storage is not
supported during offline migration.
Offline migration can be requested with a new migration flag called
VIR_MIGRATE_OFFLINE (which has to be combined with
VIR_MIGRATE_PERSIST_DEST flag).
The termios struct exported by the termios.h header is used as an
argument for vshMakeStdinRaw(). The header isn't used anywhere in
tools/virsh-domain.c.
This patch adds the header to the header declaring vshMakeStdinRaw() and
removes other places in virsh.
Libvirt's helper API's when called directly don't raise the error so
that virsh remembers it. Subsequent calls to libvirt API's might reset
the error.
In case of schedinfo virDomainFree() in the cleanup section resets the
error when virTypedParameterAssignFromStr() fails.
This patch adds function vshSaveLibvirtError() that can be called after
calling libvirt helper APIs to ensure the error is remembered.
virStringSplit requires a non-NULL input, but commit cef78ed forgot
to follow the rule.
* tools/virsh-domain.c (cmdReboot, cmdShutdown): Avoid NULL deref.
The virNodeSuspend API allows for a duration of 0, to mean no
timed wakup. virsh needlessly forbids this though
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virDomainShutdownFlags and virDomainReboot APIs allow the caller
to request the operation is implemented via either acpi button press
or a guest agent. For containers, a couple of other methods make
sense, a message to /dev/initctl, and direct kill(SIGTERM|HUP) of
the container init process.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
On error, virStoragePoolGetAutostart would return -1 leaving autostart
untouched.
Removed the misleading debug message as well.
Error: CHECKED_RETURN (CWE-252):
libvirt-0.10.2/tools/virsh-pool.c:1386: unchecked_value: No check of the
return value of "virStoragePoolGetAutostart(pool, &autostart)".
Found by coverity:
Error: SIZEOF_MISMATCH (CWE-569):
libvirt-0.10.2/tools/virsh-domain.c:4754: suspicious_sizeof: Passing
argument "8UL /* sizeof (cpumap) */" to function
"_vshCalloc(vshControl *, size_t, size_t, char const *, int)" and
then casting the return value to "unsigned char *" is suspicious.
Error: SIZEOF_MISMATCH (CWE-569):
libvirt-0.10.2/tools/virsh-domain.c:4942: suspicious_sizeof: Passing
argument "8UL /* sizeof (cpumap) */" to function
"_vshCalloc(vshControl *, size_t, size_t, char const *, int)" and
then casting the return value to "unsigned char *" is suspicious.
Throughout the code, we've always used VIR_DOMAIN_SHUTDOWN* flags
even for virDomainReboot() API and its implementation. Fortunately,
the appropriate macros has the same value. But if we want to keep
things consistent, we should be using the correct macros. This
patch doesn't break anything, luckily.
Just a little rewrite of the cmdDomDisplay function to make it
consistent and hopefully more readable. This also fixes a problem
with password not being displayed for vnc even with the
"--include-password" option.
Now that we can filter on this information, we should also make
it easy to get at.
* tools/virsh-snapshot.c (cmdSnapshotInfo): Add another output
row, and switch to XPath queries rather than strstr.
Snapshot filtering based on types is useful enough to add
back-compat support into virsh. It is also rather easy - all
versions of libvirt that don't understand the new filter flags
already gave us sufficient information in a single XML field
to reconstruct all the information we need (that is, it isn't
until libvirt 1.0.1 that we have more interesting types of
snapshots, such as offline external).
* tools/virsh-snapshot.c (vshSnapshotFilter): New function.
(vshSnapshotListCollect): Add fallback support.
As we enable more modes of snapshot creation, it becomes more important
to be able to quickly filter based on snapshot properties. This patch
introduces new filter flags; subsequent patches will introduce virsh
back-compat filtering, as well as actual libvirt filtering.
* include/libvirt/libvirt.h.in (virDomainSnapshotListFlags): Add
five new flags in two new groups.
* src/libvirt.c (virDomainSnapshotNum, virDomainSnapshotListNames)
(virDomainListAllSnapshots, virDomainSnapshotNumChildren)
(virDomainSnapshotListChildrenNames)
(virDomainSnapshotListAllChildren): Document them.
* src/conf/snapshot_conf.h (VIR_DOMAIN_SNAPSHOT_FILTERS_STATUS)
(VIR_DOMAIN_SNAPSHOT_FILTERS_LOCATION): Add new convenience filter
collection macros.
* tools/virsh-snapshot.c (cmdSnapshotList): Add 5 new flags.
* tools/virsh.pod (snapshot-list): Document them.
This reverts commits 5f63a5cb42
and ff86b0c97b. After much list
discussion, consensus was that libvirt aliases should be reserved
to correct typos, otherwise it risks confusion. Rather, we
should implement a way for users to provide their own aliases
as part of their virsh configuration preferences.
Modified the places where virNodeGetInfo was used for the purpose
of obtaining the maximum node CPU number. Transparently falling
back to virNodeGetInfo in case of failure.
Wrote utility function vshNodeGetCPUCount to compute node CPU
number.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
External checkpoints could be created with snapshot-create, but
without libvirt supplying a default name for the memory file,
it is essential to add a new argument to snapshot-create-as to
allow the user to choose the memory file name. This adds the
option --memspec [file=]name[,snapshot=type], where type can
be none, internal, or external. For an example,
virsh snapshot-create-as $dom --memspec /path/to/file
is the shortest possible command line for creating an external
checkpoint, named after the current timestamp.
* tools/virsh-snapshot.c (vshParseSnapshotMemspec): New function.
(cmdSnapshotCreateAs): Use it.
* tests/virsh-optparse (test_url): Test it.
* tools/virsh.pod (snapshot-create-as): Document it.
So far, none of the existing callers of vshStringToArray expected
the user to ever pass a literal comma; meanwhile, snapshot parsing
had rolled its own array parser. Moving the comma escaping into
the common function won't affect any existing callers, and will make
this function reusable for adding memory handling to snapshot parsing.
As a bonus, the testsuite was already testing snapshot parsing, so
the fact that the test still passes means that we are now giving
testsuite exposure to vshStringToArray.
* tools/virsh-snapshot.c (vshParseSnapshotDiskspec): Move ,,
parsing...
* tools/virsh.c (vshStringToArray): ...into common function.
Also, vshStrdup can't fail.
Make it clear that the alternate terms have no difference except
for length of time they were supported.
* tools/virsh.pod (start, shutdown, reboot): More documentation.
https://bugzilla.redhat.com/show_bug.cgi?id=873344 suggested that
the grouping 'boot', 'shutdown', 'reboot'; as well as the grouping
'start', 'stop', 'restart'; might be easier to remember than the
current mix of 'start', 'shutdown', 'reboot'.
Also, touch up the wording of 'reboot' to be more accurate.
* tools/virsh-domain.c (domManagementCmds): Add other command names.
* tools/virsh.pod (start, shutdown, reboot): Document the aliases.
The default behavior while creating external checkpoints is to pause the
guest while the memory state is captured. We want the users to sacrifice
space saving for creating the memory save image while the guest is live
to minimize downtime.
This patch adds a flag that causes the guest not to be paused before
taking the snapshot.
*include/libvirt/libvirt.h.in:
- add new paused reason: VIR_DOMAIN_PAUSED_SNAPSHOT
- add new flag for taking snapshot: VIR_DOMAIN_SNAPSHOT_CREATE_LIVE
*tools/virsh-domain-monitor.c:
- add string representation for VIR_DOMAIN_PAUSED_SNAPSHOT
*tools/virsh-snapshot.c:
- add support for VIR_DOMAIN_SNAPSHOT_CREATE_LIVE
*tools/virsh.pod:
- add docs for --live option added to use
VIR_DOMAIN_SNAPSHOT_CREATE_LIVE flag
The libvirt coding standard is to use 'function(...args...)'
instead of 'function (...args...)'. A non-trivial number of
places did not follow this rule and are fixed in this patch.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=871756
Commit cd1e8d1 assumed that systems new enough to have journald
also have mkostemp; but this is not true for uclibc.
For that matter, use of mkstemp[s] is unsafe in a multi-threaded
program. We should prefer mkostemp[s] in the first place.
* bootstrap.conf (gnulib_modules): Add mkostemp, mkostemps; drop
mkstemp and mkstemps.
* cfg.mk (sc_prohibit_mkstemp): New syntax check.
* tools/virsh.c (vshEditWriteToTempFile): Adjust caller.
* src/qemu/qemu_driver.c (qemuDomainScreenshot)
(qemudDomainMemoryPeek): Likewise.
* src/secret/secret_driver.c (replaceFile): Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainScreenshot): Likewise.
This resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=862515
which describes inconsistencies in dealing with duplicate mac
addresses on network devices in a domain.
(at any rate, it resolves *almost* everything, and prints out an
informative error message for the one problem that isn't solved, but
has a workaround.)
A synopsis of the problems:
1) you can't do a persistent attach-interface of a device with a mac
address that matches an existing device.
2) you *can* do a live attach-interface of such a device.
3) you *can* directly edit a domain and put in two devices with
matching mac addresses.
4) When running virsh detach-device (live or config), only MAC address
is checked when matching the device to remove, so the first device
with the desired mac address will be removed. This isn't always the
one that's wanted.
5) when running virsh detach-interface (live or config), the only two
items that can be specified to match against are mac address and model
type (virtio, etc) - if multiple netdevs match both of those
attributes, it again just finds the first one added and assumes that
is the only match.
Since it is completely valid to have multiple network devices with the
same MAC address (although it can cause problems in many cases, there
*are* valid use cases), what is needed is:
1) remove the restriction that prohibits doing a persistent add of a
netdev with a duplicate mac address.
2) enhance the backend of virDomainDetachDeviceFlags to check for
something that *is* guaranteed unique (but still work with just mac
address, as long as it yields only a single results.
This patch does three things:
1) removes the check for duplicate mac address during a persistent
netdev attach.
2) unifies the searching for both live and config detach of netdevices
in the subordinate functions of qemuDomainModifyDeviceFlags() to use the
new function virDomainNetFindIdx (which matches mac address and PCI
address if available, checking for duplicates if only mac address was
specified). This function returns -2 if multiple matches are found,
allowing the callers to print out an appropriate message.
Steps 1 & 2 are enough to fully fix the problem when using virsh
attach-device and detach-device (which require an XML description of
the device rather than a bunch of commandline args)
3) modifies the virsh detach-interface command to check for multiple
matches of mac address and show an error message suggesting use of the
detach-device command in cases where there are multiple matching mac
addresses.
Later we should decide how we want to input a PCI address on the virsh
commandline, and enhance detach-interface to take a --address option,
eliminating the need to use detach-device
* src/conf/domain_conf.c
* src/conf/domain_conf.h
* src/libvirt_private.syms
* added new virDomainNetFindIdx function
* removed now unused virDomainNetIndexByMac and
virDomainNetRemoveByMac
* src/qemu/qemu_driver.c
* remove check for duplicate max from qemuDomainAttachDeviceConfig
* use virDomainNetFindIdx/virDomainNetRemove instead
of virDomainNetRemoveByMac in qemuDomainDetachDeviceConfig
* use virDomainNetFindIdx instead of virDomainIndexByMac
in qemuDomainUpdateDeviceConfig
* src/qemu/qemu_hotplug.c
* use virDomainNetFindIdx instead of a homespun loop in
qemuDomainDetachNetDevice.
* tools/virsh-domain.c: modified detach-interface command as described
above
Patch 61299a1c fixed a long-standing pod error in the man page.
But we should be preventing these up front.
See also https://bugzilla.redhat.com/show_bug.cgi?id=870273
* tools/Makefile.am (virt-xml-validate.1, virt-pki-validate.1)
(virt-host-validate.1, virt-sanlock-cleanup.8, virsh.1): Reject
pod conversion errors.
* daemon/Makefile.am ($(srcdir)/libvirtd.8.in): Likewise.
We always expose individual bits from flags as separate options rather
than exposing a raw flags options. Since virNodeSuspendForDuration does
not currently support any flags, the only way of using this --flags
options that would not fail is "--flags 0", which is equivalent to
omitting the option. Thus it is highly unlikely anyone would actually be
using it and removing it should be safe.
https://bugzilla.redhat.com/show_bug.cgi?id=869100 mentioned some
confusion about 'virsh snapshot-list' errors. Clean up a
misleading error message, and add some documentation.
* tools/virsh-snapshot.c (cmdSnapshotList): Mention --current
rather than --from when appropriate.
* tools/virsh.pod (snapshot-list): Mention that the named starting
point is NOT part of the list except under --tree.
Upstream kernel introduced new sysfs knob "merge_across_nodes" to
specify if pages from different numa nodes can be merged. When set
to 0, only pages which physically reside in the memory area of
same NUMA node can be merged. When set to 1, pages from all nodes
can be merged.
This patch supports the tuning by adding new param field
"shm_merge_across_nodes".
Using VIR_DOMAIN_XML_MIGRATABLE flag, one can request domain's XML
configuration that is suitable for migration or save/restore. Such XML
may contain extra run-time stuff internal to libvirt and some default
configuration may be removed for better compatibility of the XML with
older libvirt releases.
This flag may serve as an easy way to get the XML that can be passed
(after desired modifications) to APIs that accept custom XMLs, such as
virDomainMigrate{,ToURI}2 or virDomainSaveFlags.
Add a read-only udev based backend for virInterface. Useful for distros
that do not have netcf support yet. Multiple libvirt based utilities use
a HAL based fallback when virInterface is not available which is less
than ideal. This implements:
* virConnectNumOfInterfaces()
* virConnectListInterfaces()
* virConnectNumOfDefinedInterfaces()
* virConnectListDefinedInterfaces()
* virConnectListAllInterfaces()
* virConnectInterfaceLookupByName()
* virConnectInterfaceLookupByMACString()
I was using qemu-monitor-command during development, and found it quite
hard to use. Compare the results of this patch on ease of reading:
$ virsh qemu-monitor-command dom '{"execute":"query-version"}'
{"return":{"qemu":{"micro":1,"minor":12,"major":0},"package":"(qemu-kvm-0.12.1.2)"},"id":"libvirt-7683"}
$ virsh qemu-monitor-command --pretty dom '{"execute":"query-version"}'
{
"return": {
"qemu": {
"micro": 1,
"minor": 12,
"major": 0
},
"package": "(qemu-kvm-0.12.1.2)"
},
"id": "libvirt-7674"
}
* tools/virsh-host.c (cmdQemuMonitorCommand): New option.
* tools/virsh.pod (qemu-monitor-command): Document it.
This command uses the new virNetworkUpdate() API to modify an existing
network definition, and optionally have those modifications take
effect immediately without restarting the network.
An example usage:
virsh net-update mynet add-last ip-dhcp-host \
"<host mac='00:11:22:33:44:55' ip='192.168.122.45'/>" \
--live --config
If you like, you can instead put the xml into a file, and call like
this:
virsh net-update mynet add ip-dhcp-host /tmp/myxml.xml
--live --config
virsh will autodetect whether the argument is itself an xml element,
or if it's a file, by looking at the first character - the first
character of an xml element is always "<", and the first character of
a file is almost always *not* "<" (in the rare case that it is, the
user could specify "./<filename...").
A --parent-index option is also available (to give the index within a
list of parent objects, e.g. the index of the parent <ip> element when
updating ip-dhcp-host elements), but is optional and at least for now
will probably be used rarely.
--live, --config, and --current options - if you specify --live, only
the live state of the network will be updated. If you also specify
--config, then the persistent configuration will also be updated;
these two commands can be given separately, or both together. If you
don't specify either (you can optionally specify "--current" for the
same effect), then the "current" config will be updated (i.e. if the
network is active, then only its live config is affected, but if the
network is inactive, only the persistent config is affected).
https://www.gnu.org/licenses/gpl-howto.html recommends that
the 'If not, see <url>.' phrase be a separate sentence.
* tests/securityselinuxhelper.c: Remove doubled line.
* tests/securityselinuxtest.c: Likewise.
* globally: s/; If/. If/
Based exclusively on work by Eric Blake in a patch posted with the same
subject. However some modifications related to comments and my plans to
add another backend.
Added WITH_INTERFACE as the only automake variable deciding whether to
build the driver and using WITH_NETCF to identify that we're wanting to
use the netcf library as the backend.
* configure.ac: Added with_interface
* src/interface/netcf_driver.c: Renamed..
* src/interface/interface_backend_netcf.c: ..to this to match storage.
* src/interface/netcf_driver.h: Renamed..
* src/interface/interface_driver.h: ..to this.
* daemon/Makefile.am: Respect WITH_INTERFACE and WITH_NETCF.
* libvirt.spec.in: Add RPM support for --with-interface
The new command 'virsh blockcommit $dom $disk' requests the start
of an asynchronous commit operation across the entire chain of
$disk. Further arguments can fine-tune which portion of the
chain is committed. Existing 'virsh blockjob' commands can then
track the status, change the bandwidth, or abort the commit job.
With a bit more on the command line, 'virsh blockcommit $dom $disk
--wait --verbose' can be used for blocking behavior, with visual
feedback on the overall status, and can be canceled with Ctrl-C.
The overall design, including the wait loop logic, borrows heavily
from the existing blockpull command.
* tools/virsh-domain.c (cmdBlockCommit): New function.
* tools/virsh.pod (blockcommit): Document it.
New command node-memory-tune to get/set the node memory parameters,
only two parameters are allowed to set (pages_to_scan, and sleep_millisecs,
see documents in this patch for more details).
Example of node-memory-tune's output:
Shared memory:
pages_to_scan 100
sleep_millisecs 20
pages_shared 0
pages_sharing 0
pages_unshared 0
pages_volatile 0
full_scans 0
This introduces four new options for secret-list, to filter the
returned secrets by whether it's ephemeral or not, and/or by
whether it's private or not.
* tools/virsh-secret.c: (New helper vshSecretSorter,
vshSecretListFree, and vshCollectSecretList; Use the new
API for secret-list; error out if flags are specified,
because there is no way to filter the results when using
old APIs (no APIs to get the properties (ephemeral, private)
of a secret yet).
* tools/virsh.pod: Document the 4 new options.
tools/virsh-nwfilter.c:
* vshNWFilterSorter to sort network filters by name
* vshNWFilterListFree to free the network filter objects list.
* vshNWFilterListCollect to collect the network filter objects, trying
to use new API first, fall back to older APIs if it's not supported.
tools/virsh-nodedev.c:
* vshNodeDeviceSorter to sort node devices by name
* vshNodeDeviceListFree to free the node device objects list.
* vshNodeDeviceListCollect to collect the node device objects, trying
to use new API first, fall back to older APIs if it's not supported.
* Change option --cap to accept multiple capability types.
tools/virsh.pod
* Update document for --cap
This improve helper vshStringToArray to accept const string as
argument instead. To not convert the const string when using
vshStringToArray, and thus avoid motifying it.
I got an off-list report about a bad diagnostic:
Target network card mac 52:54:00:49:07:ccdoes not match source 52:54:00:49:07:b8
True to form, I've added a syntax check rule to prevent it
from recurring, and found several other offenders.
* cfg.mk (sc_require_whitespace_in_translation): New rule.
* src/conf/domain_conf.c (virDomainNetDefCheckABIStability): Add
space.
* src/esx/esx_util.c (esxUtil_ParseUri): Likewise.
* src/qemu/qemu_command.c (qemuCollectPCIAddress): Likewise.
* src/qemu/qemu_driver.c (qemuDomainSetMetadata)
(qemuDomainGetMetadata): Likewise.
* src/qemu/qemu_hotplug.c (qemuDomainChangeNetBridge): Likewise.
* src/rpc/virnettlscontext.c
(virNetTLSContextCheckCertDNWhitelist): Likewise.
* src/vmware/vmware_driver.c (vmwareDomainResume): Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainGetXMLDesc, vboxAttachDrives):
Avoid false negatives.
* tools/virsh-domain.c (info_save_image_dumpxml): Reword.
Based on a report by Luwen Su.
tools/virsh-interface.c:
* vshInterfaceSorter to sort interfaces by name
* vshInterfaceListFree to free the interface objects list.
* vshInterfaceListCollect to collect the interface objects, trying
to use new API first, fall back to older APIs if it's not supported.
tools/virsh-network.c:
* vshNetworkSorter to sort networks by name
* vshNetworkListFree to free the network objects list.
* vshNetworkListCollect to collect the network objects, trying
to use new API first, fall back to older APIs if it's not supported.
* New options --persistent, --transient, --autostart, --no-autostart,
for net-list, and new field 'Persistent' for its output.
tools/virsh.pod:
* Add documents for the new options.
tools/virsh-volume.c:
* vshStorageVolSorter to sort storage vols by name
* vshStorageVolumeListFree to free the volume objects list
* vshStorageVolumeListCollect to collect the volume objects, trying
to use new API first, fall back to older APIs if it's not supported.
When setting the cpu tunables in virsh you are able to update only a
subset of them. Virsh while doing the update updated all of the
tunables, changed ones with new values and unchanged with old ones.
This is unfortunate as it:
a) might overwrite some other change by a race condition (unprobable)
b) fails with range checking as some of the old values saved might be
out of range
This patch changes the update procedure so that only the changed value
is updated on the host.
This patch also fixes a very unprobable memory leak if the daemon would
return a string tunable parameter, as the typed parameter array was not
cleared.
A last minute rename in commit fc122e1a to virsh.h was not properly
reflected when rebasing virsh-pool.c in commit 93a346d.
* tools/virsh-pool.c (vshStoragePoolListCollect): Use VSH_MATCH,
not MATCH.
tools/virsh-pool.c:
* vshStoragePoolSorter to sort the pool list by pool name.
* struct vshStoragePoolList to present the pool list, pool info
is collected by list->poolinfo if 'details' is specified by
user.
* vshStoragePoolListFree to free the pool list
* vshStoragePoolListCollect to collect the pool list, new API
virStorageListAllPools is tried first, if it's not supported,
fall back to older APIs.
* New options --persistent, --transient, --autostart, --no-autostart
and --type for pool-list. --persistent or --transient is to filter
the returned pool list by whether the pool is persistent or not.
--autostart or --no-autostart is to filter the returned pool list
by whether the pool is autostarting or not. --type is to filter
the pools by pool types. E.g.
% virsh pool-list --all --persistent --type dir,disk
tools/virsh.pod:
* Add documentations for the new options.
Move definition of MATCH from virsh-domain-monitor.c into
virsh.h, and rename it as VSH_MATCH for further use.
* tools/virsh-domain-monitor.c: Change MATCH into VSH_MATCH
* tools/virsh.h: Define VSH_MATCH
The storage pool's management doesn't relate with a domain, it
probably was an intention, but not achieved yet. And the fact
is only active pools are listed by default.
Yesterday's commit 15d2c9f pointed out that virsh was still using
localtime(), which is not thread-safe, even though virsh is
definitely multi-threaded. Even if we only ever triggered it from
one thread, it's better safe than sorry for maintenance purposes.
* cfg.mk (exclude_file_name_regexp--sc_prohibit_nonreentrant):
Tighten the rule.
* tools/virsh.c (vshOutputLogFile): Avoid localtime.
(vshEditWriteToTempFile, vshEditReadBackFile, cmdCd, cmdPwd)
(vshCloseLogFile): Avoid strerror.
* tools/console.c (vshMakeStdinRaw): Likewise.
* tools/virsh-domain.c (vshGenFileName): Fix spacing in previous
patch.
On 09/04/2012 08:20 AM, Eric Blake wrote:
> tv_sec is required by POSIX to be
> of type time_t; so this is a bug in the OpenBSD header
> [for declaring it as long]
Most likely this problem arose because of the patch I pushed
in gnulib commit e07d7c40f3ca5ec410cf5aa6fa03cfe51e712039.
Previously, gnulib required timeval's tv_sec to be
the same size as time_t. But now, it requires only that
tv_sec be big enough to hold a time_t.
This patch was needed for Emacs. Without the patch, gnulib
replaced struct timeval on OpenBSD, and this messed up
utimens.c, and Emacs wouldn't build.
Alternatively, gnulib could substitute its own struct timeval
for the system's, wrapping every struct timeval-using function
(gettimeofday, futimesat, futimes, lutimes, etc. That'd be
more work, though. And it would introduce some performance
issues with gettimeofday, which is supposed to be fast.
I've been trying to get away from using struct timeval,
and to use the higher-resolution struct timespec instead,
so messing with these obsolescent interfaces has been
lower priority for me. But if someone wants to take the
more-ambitious approach that'd be fine, I expect.
For this particular case, though, how about if we avoid
the problem entirely? libvirt doesn't need to use struct
timeval here at all. It makes libvirt smaller and probably
faster, and it ports to OpenBSD without messing with gnulib.
Now that vshCommandRun() checks for the connection automaticaly, remove
all of the redundant checks in the code.
vshConnectionUsability() no longer needs to be exported and this patch
marks it static.
Almost each virsh command uses the function vshConnectionUsability
before doing anything, to check if the connection is "alive". Commands
that don't need an conection are already conveniently marked with
VSH_CMD_FLAG_NOCONNECT. We can automaticaly check for the connection
before calling any remote command so we don't forget to do so.
This patch also upgrades the connection check to use virConnectIsAlive
along with the current approach.
When executing virsh -t <command> the reported timing was off
by 3 orders of magnitude if the command took more than one
second.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Although virsh command raises a correct error information, the command status
returns 0(true), this patch is used for fixing this issue.
Signed-off-by: Alex Jia <ajia@redhat.com>
The bandwidth units for blockpull and blockcopy are in Megabytes per
Second, not Megabits per Second.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This patch adds two macros: VIR_DOMAIN_SCHEDULER_EMULATOR_PERIOD,
VIR_DOMAIN_SCHEDULER_EMULATOR_QUOTA for controlling cpu bandwidth
for emulator activities not tied to vcpus
Since the move to systemd libvirt-guests doesn't output this progress
information anymore. This patch brings back this feature.
It is helpful to show the admin what the system is waiting for and what
is left of the timeout (e.g. for calibrating the shutdown timing of a ups).
Rewriting the current line with \r doesn't work anymore in the context
of systemd. So always write new lines, but move to 5 second intervals
to avoid flooding the console.
Last of the file splits.
* tools/virsh-volume.h: New file.
* tools/Makefile.am (virsh_SOURCES): Build it.
* tools/virsh.c: Use new header.
* tools/virsh-volume.c: Likewise.
(vshCommandOptVolBy): Fix flag usage.
Almost done with the splits.
* tools/virsh-snapshot.h: New file.
* tools/Makefile.am (virsh_SOURCES): Build it.
* tools/virsh.c: Use new header.
* tools/virsh-snapshot.c: Likewise.
One of the simpler splits.
* tools/virsh-secret.h: New file.
* tools/Makefile.am (virsh_SOURCES): Build it.
* tools/virsh.c: Use new header.
* tools/virsh-secret.c: Likewise.
More in a series of file splits.
* tools/virsh-pool.h: New file.
* tools/Makefile.am (virsh_SOURCES): Build it.
* tools/virsh.c: Use new header.
* tools/virsh-pool.c: Likewise.
(virCommandOptPoolBy): Fix flag usage.
Yet another split file.
* tools/virsh-nwfilter.h: New file.
* tools/Makefile.am (virsh_SOURCES): Build it.
* tools/virsh.c: Use new header.
* tools/virsh-nwfilter.c: Likewise.
Another worthwhile split, needed one more public function.
* tools/virsh-nodedev.h: New file.
* tools/Makefile.am (virsh_SOURCES): Build it.
* tools/virsh-nodedev.c: Use new header.
* tools/virsh.c: Likewise.
(vshTreePrint): Export.
* tools/virsh.h (vshTreePrint): Declare.
Another relatively easy file split.
* tools/virsh-network.h: New file.
* tools/Makefile.am (virsh_SOURCES): Build it.
* tools/virsh.c: Use new header.
* tools/virsh-network.c: Likewise.
(vshCommandOptNetworkBy): Update signature.
Another relatively easy split, since helper functions were fixed
in the previous patch.
* tools/virsh-interface.h: New file.
* tools/Makefile.am (virsh_SOURCES): Build it.
* tools/virsh.c: Use new header.
* tools/virsh-interface.c: Likewise.
(vshCommandOptInterfaceBy): Check flags.
In preparation for splitting virsh-interface.c, I found these
functions need to be declared in virsh.h, as well as one that
belongs more properly in virsh-domain.h. Also, since we
use the VSH_BY* flags in more than one function, I improved
how they are used.
* tools/virsh.h (vshNameSorter, vshCmdHasOption): Declare.
(VSH_BYID): Turn into enum.
(vshCommandOptDomainBy): Move...
* tools/virsh-domain.h): ...here.
* tools/virsh.c: (vshNameSorter): Export.
(cmd_has_option): Rename...
(vshCmdHasOption): ...and export.
(vshCommandOptDomainBy): Move...
* tools/virsh-domain.c (vshCommandOptDomainBy): ...here, adjust
signature, and check flags.
* tools/virsh-network.c (vshCommandOptNetworkBy): Update callers.
* tools/virsh-nwfilter.c (vshCommandOptNWFilterBy): Likewise.
* tools/virsh-secret.c (vshCommandOptSecret): Likewise.
* tools/virsh-domain-monitor.c (includes): Likewise.
* tools/virsh-host.c (includes): Likewise.
The splits are getting easier, with fewer cleanups needed in virsh.h.
* tools/virsh-host.h: New file.
* tools/Makefile.am (virsh_SOURCES): Build it.
* tools/virsh-host.c: Use new header.
* tools/virsh.c: Likewise.
Another file worth compiling on its own instead of by .c inclusion.
* tools/virsh-domain-monitor.h: New file.
* tools/Makefile.am (virsh_SOURCES): Build it.
* tools/virsh.h (vshGetDomainDescription): Move to correct
header.
* tools/virsh-domain-monitor.c: Use new header.
* tools/virsh.c: Likewise.
* tools/virsh-domain.c: Likewise.
C99 says that __foo naming is reserved for the compiler. Besides,
we had several different styles in use; this consolidates things
to set up the typedefs up front then declare the types with
consistent naming.
* tools/virsh.h: Use consistent struct naming.
* tools/virsh.c (_vshCommandParser): Likewise.
The virsh-domain.c file was pretty self-contained; the only
entry point was the table of command definitions. The bulk
of this patch is making more functions in virsh.c reusable.
A later patch will clean up poor naming choices.
* tools/Makefile.am (virsh_SOURCES): Build virsh-domain.c.
* tools/virsh-domain.h: New file.
* tools/virsh.h (virshReportError, vshResetLibvirtError)
(vshAskReedit, vshStreamSink): Declare.
* tools/virsh.c: Switch from using .c to .h.
(virshReportError, vshResetLibvirtError, vshAskReedit)
(vshStreamSink, prettyCapacity): Export.
(vshCatchInt): Move...
* tools/virsh-domain.c: ...into sole user. Use header.
Having one .c file include another does not give any compilation
benefits; move towards modular .o files by first splitting out
reused declarations into a new virsh.h. This patch doesn't try
very hard to see which functions are used or not, to make it
easier to review the file split. Future patches can further trim
the header to be smaller.
* tools/Makefile.am (virsh_SOURCES): List new file, and prepare
for others.
* tools/virsh.c: Split declarations...
* tools/virsh.h: ...into new file, and make several functions
non-static.
* tools/virsh-domain-monitor.c (vshGetDomainDescription): Make
non-static.
It's easier to order things in topological order than it is to
forward declare in one file for use only by one other file.
* tools/virsh.c (vshWatchJob, parseRateStr)
(vshDomainStateToString, vshDomainStateReasonToString)
(vshDomainControlStateToString, vshDomainVcpuStateToString): Drop
useless prototypes.
* tools/virsh-domain.c (vshWatchJob): Move earlier.
The '#endif' for a WIN32 conditional was placed one function
too high, leaving the impl of the console command enabled
and referencing functions that were disabled
* tools/virsh.c: New macro vshStrcasecmp
* tools/virsh-domain-monitor.c: Use vshStrcasecmp instead of
strcasecmp
* tools/virsh-snapshot.c: Likewise
* cfg.mk: Only avoid doing strcase checking for virsh.c
As the consensus in:
https://www.redhat.com/archives/libvir-list/2012-July/msg01692.html,
this patch is to destroy conf/virdomainlist.[ch], folding the
helpers into conf/domain_conf.[ch].
* src/Makefile.am:
- Various indention fixes incidentally
- Add macro DATATYPES_SOURCES (datatypes.[ch])
- Link datatypes.[ch] for libvirt_lxc
* src/conf/domain_conf.c:
- Move all the stuffs from virdomainlist.c into it
- Use virUnrefDomain and virUnrefDomainSnapshot instead of
virDomainFree and virDomainSnapshotFree, which are defined
in libvirt.c, and we don't want to link to it.
- Remove "if" before "free" the object, as virObjectUnref
is in the list "useless_free_options".
* src/conf/domain_conf.h:
- Move all the stuffs from virdomainlist.h into it
- s/LIST_FILTER/LIST_DOMAINS_FILTER/
* src/libxl/libxl_driver.c:
- s/LIST_FILTER/LIST_DOMAINS_FILTER/
- no (include "virdomainlist.h")
* src/libxl/libxl_driver.c: Likewise
* src/lxc/lxc_driver.c: Likewise
* src/openvz/openvz_driver.c: Likewise
* src/parallels/parallels_driver.c: Likewise
* src/qemu/qemu_driver.c: Likewise
* src/test/test_driver.c: Likewise
* src/uml/uml_driver.c: Likewise
* src/vbox/vbox_tmpl.c: Likewise
* src/vmware/vmware_driver.c: Likewise
* tools/virsh-domain-monitor.c: Likewise
* tools/virsh.c: Likewise
Similar to the previous patch, prepending 'help' to a partial
command string doesn't cut us any slack.
$ virsh help pool-define-as --name foo --type dir
error: command 'help' doesn't support option --name
This patch adds a few hacks to make 'help' ignore everything after the
first data bit, so the above command shows help output for pool-define-as.
Often times I find myself halfway through typing a long command when
I want to see 'help' output. I instinctively append '--help' to the
command I'm typing, only to get an error:
$ virsh vol-create-as foo --help
error: command 'vol-create-as' doesn't support option --help
This patch makes --help work in a pretty hacky way. One missing piece
here is that --help isn't listed as an option in the actual 'help <cmd>'
output, but maybe this can be a starting point for someone.
For some reason I only get this after applying subsequent upcoming
patches that touch virsh, but don't seem to actually cause the warning.
virsh.c: In function ‘vshCommandParse’:
virsh.c:2014:46: error: ‘opt_index’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
cc1: all warnings being treated as errors
List:
- some old libvir/libvirt rename leftovers (the only problem can be
if somebody parses 'virsh version' output really badly)
- remove pointless tags specified in some pages that are not used
I originally postet this into the Fedora bugzilla
https://bugzilla.redhat.com/show_bug.cgi?id=843836
Currently gracefully shutting down guest vms on host shutdown does not work on
Fedora 17, the guests are killed hard on system shutdown.
The reason is systemd considers libvirt-guests.service to be stopped when the
system is running:
$ systemctl status libvirt-guests.service
libvirt-guests.service - Suspend Active Libvirt Guests
Loaded: loaded (/usr/lib/systemd/system/libvirt-guests.service;
enabled)
Active: deactivating (stop) since Fri, 27 Jul 2012 15:47:31 +0200;
2min 48s ago
Process: 1085 ExecStart=/etc/init.d/libvirt-guests start
(code=exited, status=0/SUCCESS)
Control: 1150 (libvirt-guests)
CGroup: name=systemd:/system/libvirt-guests.service
└ control
├ 1150 /bin/sh /etc/init.d/libvirt-guests stop
└ 2257 sleep 1
libvirt-guests.service is defined as type "simple" in systemd (the default).
That means systemd will shut down the service when the start executable is
terminated after starting is done. Systemd will not call stop again on system
shutdown because it thinks it is already stopped.
The solution is to define it as type "oneshot" and set the flag
"RemainAfterExit". Then systemd will consider the service as active after
startup and will call the stop function on host shutdown.
This is a follow up patch of commit f9ce7dad6, it modifies all
the files which declare the copyright like "See COPYING.LIB for
the License of this software" to use the detailed/consistent one.
And deserts the outdated comments like:
* libvirt-qemu.h:
* Summary: qemu specific interfaces
* Description: Provides the interfaces of the libvirt library to handle
* qemu specific methods
*
* Copy: Copyright (C) 2010, 2012 Red Hat, Inc.
Uses the more compact style like:
* libvirt-qemu.h: Interfaces specific for QEMU/KVM driver
*
* Copyright (C) 2010, 2012 Red Hat, Inc.
On some fallback paths in virsh, error reported by the previously failed
API is cleared by virResetLastError() that doesn't free error stored by
virsh. This patch changes this to clear it using vshResetLibvirtError().
Virsh uses an error handler to save errors from libvirt. On some code
paths it's needed to clear libvirt errors and continue on fallback code
paths without reporting failure.
This patch adds function vshResetLibvirtError() that clears error
returned by libvirt and updates all places where the old two-line method
was used.
When undefining a domain and removing associated storage using "virsh
undefine --storage" the domain was at first undefined and after that the
storage removal proces was started. If the user specified an invalid
disk to remove, the error could not be corrected.
This patch moves enumeration and filtering of volumes that should be
removed before the domain is undefined, but the removal process is still
kept after the domain has been undefined.
Change the permissible minimum value of nodesuspend duration time
to 60 seconds. If option is less than the value, reports error.
Update virsh help and manpage the infomation.
Commands in node device group moved from virsh.c to virsh-nodedev.c,
* virsh.c: Remove commands in node device group.
* virsh-nodedev.c: New file, filled with commands in node device group
* po/POTFILES.in: Add virsh-nodedev.c
* cfg.mk: Skip to check config.h including for virsh-nodedev.c
Commands in host group moved from virsh.c to virsh-host.c,
* virsh.c: Remove commands in host group.
* virsh-host.c: New file, filled with commands in host group
* po/POTFILES.in: Add virsh-host.c
* cfg.mk: Skip to check config.h including for virsh-host.c
Commands to manage domain snapshot are moved from virsh.c to
virsh-snapshot.c.
* virsh.c: Remove domain snapshot commands.
* virsh-snapshot.c: New file, filled with domain snapshot commands.
* po/POTFILES.in: Add virsh-snapshot.c
* cfg.mk: Skip strcase and config.h including checking for
virsh-snapshot.c
Commands to manage secret are moved from virsh.c to virsh-secret.c,
with a few helpers for secret command use.
* virsh.c: Remove secret commands and a few helpers.
(vshCommandOptSecret, and vshCommandOptSecretBy)
* virsh-secret.c: New file, filled with secret commands and its helpers.
* po/POTFILES.in: Add virsh-secret.c
* cfg.mk: Skip to check config.h including for virsh-secret.c
Commands to manage network filter are moved from virsh.c to virsh-nwfilter.c,
with a few helpers for network filter command use.
* virsh.c: Remove network filter commands and a few helpers.
(vshCommandOptNWFilter, and vshCommandOptNWFilterBy)
* virsh-nwfilter.c: New file, filled with network filter commands and its helpers.
* po/POTFILES.in: Add virsh-nwfilter.c
* cfg.mk: Skip to check config.h including for virsh-nwfilter.c
Commands to manage host interface are moved from virsh.c to
virsh-interface.c, with a few helpers for interface command use.
* virsh.c: Remove interface commands and a few helpers.
(vshCommandOptInterface, vshCommandOptInterfaceBy)
* virsh-interface.c: New file, filled with interface commands and
its helpers.
* cfg.mk: Skip to check config.h including for virsh-interface.c
* po/POTFILES.in: Add virsh-interface.c
Commands to manage network are moved from virsh.c to virsh-network.c,
with a few helpers for network command use.
* virsh.c: Remove network commands and a few helpers.
* virsh-network.c: New file, filled with network commands and its
helpers.
* po/POTFILES.in: Add virsh-network.c
* cfg.mk: Skip to check config.h including for virsh-network.c
This splits commands of storage pool group into virsh-pool.c,
The helpers not for common use are moved too. Standard copyright
is added for the new file.
* tools/virsh.c:
Remove commands for storage storage pool and a few helpers.
(vshCommandOptVol, vshCommandOptVolBy).
* tools/virsh-pool.c:
New file, filled with commands of storage pool group and its
helpers.
* po/POTFILES.in:
Add virsh-pool.c
* cfg.mk:
Skip to check config.h including for virsh-pool.c
This splits commands of storage volume group into virsh-volume.c,
The helpers not for common use are moved too. Standard copyright
is added for the new file.
* tools/virsh.c:
Remove commands for storage storage volume and a few helpers.
(vshCommandOptVol, vshCommandOptVolBy).
* tools/virsh-volume.c:
New file, filled with commands of storage volume group and its
helpers.
* po/POTFILES.in:
Add virsh-volume.c
* cfg.mk:
Skip to check config.h including for virsh-volume.c
This splits commands to manage domain into virsh-domain.c,The helpers
not for common use are moved into them too. Standard copyright is added
for the new file.
* tools/virsh.c:
- Remove commands for domain group, and one helper
(vshDomainVcpuStateToString)
- vshStreamSink is moved before commands's definition for it's
also used by commands not of domain group, such as volUpload.
* tools/virsh-domain.c:
- New file, commands for domain group and the one helper are
moved into it.
* po/POTFILES.in:
- Add virsh-domain.c
* cfg.mk:
- Skip to check config.h including for virsh-domain.c
This splits commands commands to monitor domain status into
virsh-domain-monitor.c. The helpers not for common use are moved too.
Standard copyright is added.
* tools/virsh.c:
- Remove commands for domain monitoring group and a few helpers (
vshDomainIOErrorToString, vshGetDomainDescription,
vshDomainControlStateToString, vshDomainStateToString) not for
common use.
- Remove (incldue "intprops.h").
* tools/virsh-domain-monitor.c:
- New file, filled with commands of domain monitor group.
- Add "intprops.h".
* cfg.mk:
- Skip strcase checking for virsh-domain-monitor.c
- Skip to check config.h including for virsh-domain-monitor.c
* po/POTFILES.in
- Add virsh-domain-monitor.c
The copyright dates in the manpages haven't been updated in awhile.
Also, when pod2man converts a pod file into a manpage, it will only
remove the extension from the filename if it is ".pod". Some of the
libvirt pod files are named *.pod.in, and that filename is placed
unchanged into the manpage. This patch uses pod2man's --name option to
fix that.
Believe it or not, there's even a BZ for this:
https://bugzilla.redhat.com/show_bug.cgi?id=819364
Per the FSF address could be changed from time to time, and GNU
recommends the following now: (http://www.gnu.org/licenses/gpl-howto.html)
You should have received a copy of the GNU General Public License
along with Foobar. If not, see <http://www.gnu.org/licenses/>.
This patch removes the explicit FSF address, and uses above instead
(of course, with inserting 'Lesser' before 'General').
Except a bunch of files for security driver, all others are changed
automatically, the copyright for securify files are not complete,
that's why to do it manually:
src/security/security_selinux.h
src/security/security_driver.h
src/security/security_selinux.c
src/security/security_apparmor.h
src/security/security_apparmor.c
src/security/security_driver.c
This patch brings support to manage sheepdog pools and volumes to libvirt.
It uses the "collie" command-line utility that comes with sheepdog for that.
A sheepdog pool in libvirt maps to a sheepdog cluster.
It needs a host and port to connect to, which in most cases
is just going to be the default of localhost on port 7000.
A sheepdog volume in libvirt maps to a sheepdog vdi.
To create one specify the pool, a name and the capacity.
Volumes can also be resized later.
In the volume XML the vdi name has to be put into the <target><path>.
To use the volume as a disk source for virtual machines specify
the vdi name as "name" attribute of the <source>.
The host and port information from the pool are specified inside the host tag.
<disk type='network'>
...
<source protocol="sheepdog" name="vdi_name">
<host name="localhost" port="7000"/>
</source>
</disk>
To work right this patch parses the output of collie,
so it relies on the raw output option. There recently was a bug which caused
size information to be reported wrong. This is fixed upstream already and
will be in the next release.
Signed-off-by: Sebastian Wiedenroth <wiedi@frubar.net>
Introduce new members in the virMacAddr 'class'
- virMacAddrSet: set virMacAddr from a virMacAddr
- virMacAddrSetRaw: setting virMacAddr from raw 6 byte MAC address buffer
- virMacAddrGetRaw: writing virMacAddr into raw 6 byte MAC address buffer
- virMacAddrCmp: comparing two virMacAddr
- virMacAddrCmpRaw: comparing a virMacAddr with a raw 6 byte MAC address buffer
then replace raw MAC addresses by replacing
- 'unsigned char *' with virMacAddrPtr
- 'unsigned char ... [VIR_MAC_BUFLEN]' with virMacAddr
and introduce usage of above functions where necessary.
Fix for a minor issue:
the sleep(1) statement was called twice,
effectively doubling the elapsed time
execution "virsh nodecpustats --percent".
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
When --direct is used when migrating a domain running on a hypervisor
that does not support direct migration (such as QEMU), the caller would
get the following error message:
this function is not supported by the connection driver:
virDomainMigrateToURI2
which is a complete nonsense since qemu driver implements
virDomainMigrateToURI2. This patch would emit a more sensible error in
this case:
Requested operation is not valid: direct migration is not supported
by the connection driver
Instead of changing the existed virFileMakePath to accept mode
argument and modifying a pile of its uses, this patch introduces
virFileMakePathWithMode, and use it instead of mkdir() to create
the readline history dir.
In vshSnapshotListCollect() vshCalloc was called with swapped nmemb and
size argument. This caused division by zero in xalloc_oversized as the
macro doesn't expect size to be zero.
Fixed up virsh -V output by removing invalid WITH_PROXY & WITH_ONE
checks, adding several missing checks, and fixing the DTrace check.
Signed-off-by: Doug Goldstein <cardoe@cardoe.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
v2:
- Refactored to use virBuffer
- Refactored to use virXPath wrappers
- Added support for tls-port and password for SPICE
- Added optional flag to disable SPICE password to the URI
- Added support for RDP
- Fixed code reviews
Add a new 'domdisplay' command that provides a URI for VNC, SPICE and
RDP connections. Presently the 'vncdisplay' command provides you with
the port info that QEMU is listening on but there is no counterpart for
SPICE and RDP. Additionally this provides you with the bind address as
specified in the XML, which the existing 'vncdisplay' lacks. For SPICE
connections it supports secure and unsecure channels and optionally
providing the password for the SPICE channel.
Signed-off-by: Doug Goldstein <cardoe@cardoe.com>
Storage is one of the last domains in libvirt where we don't fully
utilize inactive and live XML. Okay, it might be because we don't
have support for that. So implement such support. However, we need
to fallback when talking to old daemon which doesn't support this
new flag called VIR_STORAGE_XML_INACTIVE.
The vshPrintRaw function is not used on Win32, and neither
is the 'msg' parameter of vshAskReedit. Change the nesting
of #ifdef WIN32 conditionals to address this
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Update the vncdisplay command to use the virXPath wrappers as well as
check if the domain is up rather than using the port set to -1 to mean
the domain is not up.
Signed-off-by: Doug Goldstein <cardoe@cardoe.com>
This patch adds a check for the count of processors the user requests
for the guest machine so that invalid values produce a more helpful
error message.
This patch makes use of the newly added api virConnectListAllDomains()
to list domains in virsh.
Virsh now represents lists of domains using an internal structure
vshDomainList. This structure contains the virDomainPtr list as provided
by virConnectListAllDomains() and the count of domains in the list.
For backwards compatibility, the function vshDomainListCollect was added
that tries to enumerate the domains using the new API and if the API is
not supported falls back to the older approach with the two list
functions. The helper function also simulates filtering by all
currently supported flags added with virConnectListAllDomains().
This patch also cleans up the "list" command handler to use the new
helpers and adds new command line flags to make use of filtering.
Previously, to get the name of all snapshots with children, it was
necessary to get the name of all snapshots and then remove the
name of leaf snapshots. This is racy, and somewhat inefficient
compared to planned API additions. We can emulate --no-metadata on
0.9.5-0.9.12, but for now, there is no emulation of --no-leaves.
* tools/virsh.c (cmdSnapshotList): Add new options --no-leaves and
--no-metadata.
(vshSnapshotList): Emulate where possible.
* tools/virsh.pod (snapshot-list): Document them.
Append '(MAC Address)' after the help string of domiftune virsh
command as it takes the same type of argument as domif-{get,set}link
which have it specified.
as we are missing:
attach-disk: --type can accept 'lun' too, not just cdrom or floppy.
attach-disk: --target specify logical device name, not path
attach-interface: --target silently drops strings with vnet* prefix
Operating on a list of snapshot objects looks so much simpler.
In particular, since the helper function already trimmed out
irrelevant entries, we no longer have quite so many special cases
on finding the first snapshot to operate on. Also, vshTreePrint
no longer has a generic callback struct; both clients now pass
something different according to their own needs.
* tools/virsh.c (cmdSnapshotList): Use previous patches.
(vshTreeArrayLookup): Rename...
(vshNodeListLookup): ...now that it only has one client.
(cmdNodeListDevices): Adjust caller.
This patch is based on the fallback code out of cmdSnapshotList,
with tweaks to keep the snapshot objects around rather than just
their name, and to remove unwanted elements before returning.
It looks forward to a future patch when we add a way to list all
snapshot objects at once, and the next patch will simplify
cmdSnapshotList to take advantage of this factorization.
* tools/virsh.c (vshSnapshotList, vshSnapshotListFree): New functions.
Detected by valgrind:
==16217== 1 errors in context 1 of 12:
==16217== Invalid read of size 1
==16217== at 0x4A07804: __GI_strlen (mc_replace_strmem.c:284)
==16217== by 0x3019F167F6: xdr_string (in /lib64/libc-2.12.so)
==16217== by 0x3033709E8D: xdr_remote_nonnull_string (remote_protocol.c:31)
==16217== by 0x303370E5CB: xdr_remote_domain_update_device_flags_args (remote_protocol.c:2028)
==16217== by 0x30337197D1: virNetMessageEncodePayload (virnetmessage.c:341)
==16217== by 0x30337135E1: virNetClientProgramCall (virnetclientprogram.c:327)
==16217== by 0x30336F1EFD: callWithFD (remote_driver.c:4586)
==16217== by 0x30336F1F7B: call (remote_driver.c:4607)
==16217== by 0x30336F42F2: remoteDomainUpdateDeviceFlags (remote_client_bodies.h:2865)
==16217== by 0x30336D46E5: virDomainUpdateDeviceFlags (libvirt.c:9457)
==16217== by 0x41AEE8: cmdChangeMedia (virsh.c:15249)
==16217== by 0x413CB4: vshCommandRun (virsh.c:18669)
==16217== Address 0x4ec5e25 is 0 bytes after a block of size 293 alloc'd
==16217== at 0x4A04A28: calloc (vg_replace_malloc.c:467)
==16217== by 0x303364F1DB: virAllocN (memory.c:129)
==16217== by 0x41A844: vshPrepareDiskXML (virsh.c:15043)
==16217== by 0x41AECC: cmdChangeMedia (virsh.c:15246)
==16217== by 0x413CB4: vshCommandRun (virsh.c:18669)
==16217== by 0x423973: main (virsh.c:20261)
There is a little easter egg in virsh: one can easily clone
an object (domain, network, ...). Just 'virsh edit' change the name
and remove <uuid>. And then, in the end when reporting success
the new name was printed out.
However, with recent edit rewrite we lost the final part and are
still printing the original name out.
When printing reedit options we make stdin raw. However,
this results in stdout being raw as well. Therefore we need
to return carriage when doing new line. Unfortunately,
'\r' cannot be part of internationalized messages hence
we must move them to formatting string which then in turn
become huge and disarranged. To solve this, a new function
is introduced which takes variable string arguments and
prepend each with "\r\n" just before printing.
The attach-disk command used with parameter --cache created an invalid
XML snippet as the beginning of the <driver> element was not printed
when used solely with --cache and no other attribute to driver.
