Commit da9f3cd84b added the seclabel example into the
'disk-backing-chains' case.
Since the only thing that 'disk-backing-chains' tests which
'disk-backing-chains-(no)index' don't test is the seclabel we'll be able
to remove the test case if we add the seclabel example.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Convert to a switch instead of a bunch of 'if (type == ...).
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The function currently didn't have a return value. Returning the
'virLockGuard' struct allows the callers to use automatic unlocking of
the mutex.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Require check of return value of the ACL checking functions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Now that all code was refactored to use the new version we can remove
the old code.
For now the new close callbacks code has no error messages so
syntax-check forced me to remove the POTFILES entry for
virclosecallbacks.c
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The qemu driver uses connection close callbacks in more places requiring
more changes than other drivers, but luckily the changes are very
straightforward. The migration code was written in a way ensuring that
there's just one callback present so this can be preserved directly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The rewrite is straightforward as bhyve registers only the
'bhyveProcessAutoDestroy' callback which by design doesn't need any
special handling (there's just one caller which can start the VM thus
implicitly there's only one possible registration for that function).
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The rewrite is straightforward as LXC registers only the
'lxcProcessAutoDestroy' callback which by design doesn't need any
special handling (there's just one caller which can start the VM thus
implicitly there's only one possible registration for that function).
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The new APIs store the list of callbacks for a VM inside the
virDomainObj and also allow registering multiple callbacks for a single
domain and also for multiple connections.
For now this code is dormant until each driver using the old APIs is not
refactored to use the new APIs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The new connect close callbacks for domains will be represented by a
virObject associated with the domain object itself.
To simplify handling the pointer to the close callback data will be done
by an immutable pointer allocated directly when allocating the
corresponding virDomainObj struct.
This patch adds the 'closecallbacks' field to virDomainObj and a
corresponding callback to allocate it into virDomainXMLOption.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The function can't fail so there's no point in returning anything.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Introduce a helper which will return a list of all domain objects inside
of the list without filtering and thus without the need to lock
individual members.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Use the new style which doesn't require re-aligning the argument list
once you change the return type.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Remove extraneous spaces and put comment on a single line.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
'virObjectNew' can't return NULL. If we pre-check the arguments we don't
need a cleanup label.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Coverity scan reports:
"A time_t value is stored in an integer with too few bits to accommodate
it. The expression timeout is cast to unsigned int"
We are already casting and storing time_t timeout variable into unsigned int.
We can use time_t for timeout and cast it to unsigned long (should be big enough)
instead of unsigned int in sscanf, g_strdup_printf as required.
Signed-off-by: Shaleen Bathla <shaleen.bathla@oracle.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
1.clear passwd in debug log
2.alignment
3.use the same variable name for function definition and declaration
Signed-off-by: Jiang Jiacheng <jiangjiacheng@huawei.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
These while loops exit directly due to break after entering.
Use if instead of these while loops.
Signed-off-by: Jiang Jiacheng <jiangjiacheng@huawei.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Fix a misspelling in the documation of 'daemonCreateClientStream'.
Signed-off-by: Jiang Jiacheng <jiangjiacheng@huawei.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In a recent commit I've introduced an umount() call. But the
function where the call lives is compiled on all OSes, not just
Linux. But umount() is Linux specific. Other OSes have unmount
(FreeBSD), or maybe something else. But since namespaces are
Linux specific, we can wrap the call in #ifdef __linux__ and not
care about other OSes.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When calling virConnectGetDomainCapabilities() (exposed as virsh
domcapabilities) users have option to specify whatever sub-set of
{ emulatorbin, arch, machine, virttype } they want. Then we have
a logic (hidden in virQEMUCapsCacheLookupDefault()) that picks
qemuCaps that satisfy values passed by user. And whatever was not
specified is then set to the default value as specified by picked
qemuCaps. For instance: if no machine type was provided but
emulatorbin was, then the machine type is set to the default one
as defined by the emulatorbin.
Or, when just virttype was set then the remaining three values
are set to their respective defaults. Except, we have a crasher
in this case:
# virsh domcapabilities --virttype hvf
error: Disconnected from qemu:///system due to end of file
error: failed to get emulator capabilities
error: End of file while reading data: Input/output error
This is because for 'hvf' virttype (at least my) QEMU does not
have any machine type. Therefore, @machine is set to NULL and the
rest of the code does not expect that.
What we can do about this is to validate all arguments. Well,
except for the emulatorbin which is obtained from passed
qemuCaps. This also fixes the issue when domcapabilities for a
virttype of a different driver are requested, or a different
arch.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
When deciding whether to bind mount a path in domain's namespace,
we look at the QEMU mount table (/proc/$pid/mounts) and try to
match prefix of given path with one of mount points. Well, we
do that in a bit clumsy way. For instance, if there's
"/dev/hugepages" already mounted inside the namespace and we are
deciding whether to bind mount "/dev/hugepages1G/..." we decide
to skip over the path and NOT bind mount it. This is because
plain STRPREFIX() is used and yes, the former is prefix of the
latter. What we need to check also is whether the next character
after the prefix is slash.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Our code relies on mount events propagating into the namespace we
create for a domain. However, there's one caveat. In v8.8.0-rc1~8
I've tried to make us detect differences in mount tables between
the namespace in which libvirtd runs and the domain namespace.
This is crucial for any mounts that happen after the domain was
started (for instance new hugetlbfs can be mounted on say
/dev/hugepages1G).
Therefore, we take a look into /proc/$(pgrep qemu)/mounts to see
what filesystems are mounted under /dev. Now, since we don't
umount the original /dev, just mount a tmpfs over it, we get all
the events (e.g. aforementioned hugetlbfs mount on
/dev/hugepages1G), but we are not really able to access it
because of the tmpfs that's placed on top. This then confuses our
algorithm for detecting which filesystems are mounted (the
algorithm is implemented in qemuDomainGetPreservedMounts()).
To break the link between host's and guest's /dev we just need to
umount() the original /dev in the namespace. Just before our
artificially created tmpfs is moved into its place.
Fixes: 46b03819ae
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2151869#c6
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Inside of qemuCaps (for the corresponding accelerator) we have
full host CPU expansion stored, among with supported Hyper-V
Enlightenments. To report them in the domain capabilities, we
just have to pick those starting with "hv-" and see if we know
them.
You may notice that neither of our domaincapsdata test shows any
enlightenment. This is because the test works by parsing
corresponding qemucapabilitiesdata/caps_*.xml file and none of
these store the full host CPU expansion (hostCPU.fullQEMU)
because that is runtime piece of information and not formatted
into virQEMUCaps XML.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1717611
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Now that we have qemuMonitorGetCPUModelExpansion() aware of
Hyper-V Enlightenments, we can start querying it. Two conditions
need to be met:
1) KVM is in use,
2) Arch is either x86 or arm.
It may look like modifying the first call to
qemuMonitorGetCPUModelExpansion() inside of
virQEMUCapsProbeQMPHostCPU() would be sufficient but it is not.
We really need to ask QEMU for full expansion and the first call
does not guarantee that.
For the test data, I've just copied whatever
'query-cpu-model-expansion' returned earlier, therefore there are
no hv-* props. But that's okay - the full expansion is not stored
in cache (and thus not formatted in
tests/qemucapabilitiesdata/caps_*.replies files either). This is
purely runtime thing.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This continues and finishes propagation of the @hv_passthrough
argument started in the previous commit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Apart from setting @migratable prop to the
query-cpu-model-expansion command, we will need @hv-passthrough
so that we can query for expansion of Hyper-V Enlightenments
supported on the current host. The idea is to run:
{
"execute": "query-cpu-model-expansion",
"arguments": {
"type": "full",
"model": {
"name": "host",
"props": {
"hv-passthrough": true
}
}
}
}
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The virDomainCapsEnumFormat() function does not return anything
but zero and none of its callers is interested in the failure
anyways. Switch its return type from integer to void.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
We are formatting <enum/> element and its children using
virBufferAddLit(), virBufferAsprintf(), virBufferAdjustIndent(),
etc. Well, we can avoid that when switching to
virXMLFormatElement().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In a recent commit, when ditching virXPathULong() the parsing of
<selfvers/> was changed. But it was changed to virXMLPropUInt()
which is not correct because the value we're interested in is not
in an attribute but element itself.
Fixes: a3c7426839
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Since we really only need to handle key skipping in the top level object
the caller doesn't at this point even pass it to the array formatting
helper function. Remove the unused argument.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Skipping of a specific key is needed only for the top level object to
specially handle the object type. We must not pass it to any recursed
printing of nested objects as skipping keys there might be surprising
and also is unhandlable later when formatting the commandline.
Until now this did not pose a problem but was discovered when adding a
new netdev backend which has a nested config object which also has the
'type' key which was being skipped.
Modern usage will prefer JSON directly but fix the commandline generator
to prevent surprises.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The @hash variable inside of virQEMUCapsProbeQMPHostCPU() is used
only within a block, but declared at the beginning of the
function. Bring the variable declaration into the said block.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
There's nothing qemu specific about
qemuDomainCapsFeatureFormatSimple() and in fact, the function
lives in hypervisor agnostic location and thus mustn't have qemu
prefix.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
There are some network FSs (ceph, CIFS) that propagate XATTRs
properly and thus SELinux labels too. In such case using dynamic
seclabels would get in the way of migration as new seclabel is
assigned to the domain on the destination and thus two processes
with different labels (the source and the destination QEMU/helper
process) would try to access the same file. One of them is
necessarily going to be denied access.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
After previous cleanup this function is no longer used and thus
can be dropped.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When starting swtpm binary, the qemuSecurityStartTPMEmulator() is
called which sets seclabel on the TPM state and then uses
qemuSecurityCommandRun() to execute the swtpm binary with proper
seclabel. Well, the aim is to ditch
qemuSecurityStartTPMEmulator() because it entangles two distinct
operations. Just call functions for them separately.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
If swtpm binary fails to start after successful exec() (e.g. it
fails to initialize itself), the seclabels set in
qemuSecurityStartTPMEmulator() are not restored. This is due to
lacking qemuSecurityRestoreTPMLabels() call in the error path.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Now that we have qemuSecurityRestoreTPMLabels() we might as well
have qemuSecuritySetTPMLabels(). The aim here is to remove
qemuSecurityStartTPMEmulator() which couples two separate things
into a single function call.
Therefore, introduce qemuSecuritySetTPMLabels() which does only
set seclabels on the TPM state.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The qemuSecurityCleanupTPMEmulator() function calls
virSecurityManagerRestoreTPMLabels() and thus the proper name is
qemuSecurityRestoreTPMLabels(). Rename it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Currently, qemuSecurityCleanupTPMEmulator() returns nothing which
means a caller (well, there's only one - qemuExtTPMStop()) can't
produce a warning when restoring seclabels on TPM state failed.
True, qemuSecurityCleanupTPMEmulator() does report a warning
itself, but only in one specific error path.
Make the function return an integer, just like the rest of
qemuSecurity*Restore() functions.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
qemu is about to deprecate the '-no-hpet' option in favor of configuring
the timer via '-machine'.
Use the QEMU_CAPS_MACHINE_HPET capability to switch to the new syntax
and mask out the old QEMU_CAPS_NO_HPET capability at the same time to
prevent using the old syntax.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
The capability represents that qemu accepts the configuration of the
HPET timer via -machine hpet=on/off rather than the
soon-to-be-deprecated '-no-hpet' option.
The capability is detected from 'query-command-line-options' which
recently added the 'hpet' option.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Add test data based on qemu commit v7.2.0-333-g222059a0fc
- query-command-line-options now reports more accurate data
- machine types for the 8.0 cycle were added
- vhost-vdpa device support was added
- default value of 'noreboot' changed from 'true' to 'false'
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
