There are a few extra exceptions that weren't being accounted for when
creating the alias for a controller. This resulted in 1) incorrect
status XML, and 2) exceptions/printfs of what *should* have been
directly available in the controller alias when constructing device
commandline arguments:
1) The primary (and only) IDE controller on a 440FX machinetype is
hardcoded to be "ide" in qemu.
2) The primary SATA controller on a 440FX machinetype is also
hardcoded to be "ide" in qemu.
3) On machinetypes that don't support multiple PCI buses, the PCI bus
is hardcoded in qemu to have the name "pci".
4) The first usb master controller is "usb", all others are the normal
"usb%d". (note that usb controllers that are not a "master" will have
the same index, and thus alias, as the master).
We needed to pass in the full domainDef and qemuCaps in order to
properly make the decisions about these exceptions.
In the XML we have the vnc port number, but QEMU takes on command line
a vnc screen number, it's port-5900. We should fail with error message
that only ports in range [5900,65535] are valid.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1164966
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The code to add device type to the commandline was identical for lsi
and other models of SCSI controllers, but was duplicated (with the
exception of a minor ordering difference of the if-else clauses) for
the two cases. This patch replaces those two with a single instance of
the code just before the if().
This patch makes qemuValideDevicePCISlotsChipsets() more consistent in
appearance by replacing several clauses of an if with the equivalent
call to qemuDomainMachineIsI440FX. The if was checking exactly the
same items, just in a slightly different order.
Allow ccw devices to be used with multiqueues. ccw provides a one to
one relation of fds to queues and does not support the vectors option.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Reviewed-by: Daniel Hansel <daniel.hansel@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Coverity points out it was possible to have a zero return from
qemuBuildRNGBackendProps thus not filling in 'props' and then
causing a NULL dereference on the next call.
The only version that's supported in QEMU is version 2, currently.
Fortunately, it is enabled by aarch64 automatically, so there's
nothing for us that needs to be put onto command line.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Found by Laine and discussed a bit on internal IRC.
Commit id c56fe7f1d6 added support for creating a command line to support
scsi-disk.channel.
Series was here:
http://www.redhat.com/archives/libvir-list/2012-February/msg01052.html
Which pointed to a design proposal here:
http://permalink.gmane.org/gmane.comp.emulators.libvirt/50428
Which states (in part):
Libvirt should check for the QEMU "scsi-disk.channel" property. If it
is unavailable, QEMU will only support channel=lun=0 and 0<=target<=7.
However, the check added was ensuring that bus != lun *and* bus != 0. So
if bus == lun and both were non zero, we'd never make the second check.
Changing this to an *or* check fixes the check, but still is less readable
than the just checking each for 0
Rather than have a separate routine to parse the alias of an iothread
returned from qemu in order to get the iothread_id value, parse the alias
when returning and just return the iothread_id in qemuMonitorIOThreadInfoPtr
This set of patches removes the function, changes the "char *name" to
"unsigned int" and handles all the fallout.
Add 'thread_id' to the virDomainIOThreadIDDef as a means to store the
'thread_id' as returned from the live qemu monitor data.
Remove the iothreadpids list from _qemuDomainObjPrivate and replace with
the new iothreadids 'thread_id' element.
Rather than use the default numbering scheme of 1..number of iothreads
defined for the domain, use the iothreadid's list for the iothread_id
Since iothreadids list keeps track of the iothread_id's, these are
now used in place of the many places where a for loop would "know"
that the ID was "+ 1" from the array element.
The new tests ensure usage of the <iothreadid> values for an exact number
of iothreads and the usage of a smaller number of <iothreadid> values than
iothreads that exist (and usage of the default numbering scheme).
This revealed that GuestDefaultEmulator was a bit buggy, capable
of returning an emulator that didn't match the passed domain type. Fix
up the test suite input to continue to pass.
We support VNC for containers to have the same
interface with VMs. At this moment it just renders
linux text console.
Of course we don't pass any physical devices and
don't emulate virtual devices. Our VNC server
renders text from terminal master and sends
input events from VNC client to terminal.
So add special video type VIR_DOMAIN_VIDEO_TYPE_PARALLELS
for these pseudo-devices.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
==19015== 968 (416 direct, 552 indirect) bytes in 1 blocks are definitely lost in loss record 999 of 1,049
==19015== at 0x4C2C070: calloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==19015== by 0x52ADF14: virAllocVar (viralloc.c:560)
==19015== by 0x5302FD1: virObjectNew (virobject.c:193)
==19015== by 0x1DD9401E: virQEMUDriverConfigNew (qemu_conf.c:164)
==19015== by 0x1DDDF65D: qemuStateInitialize (qemu_driver.c:666)
==19015== by 0x53E0823: virStateInitialize (libvirt.c:777)
==19015== by 0x11E067: daemonRunStateInit (libvirtd.c:905)
==19015== by 0x53201AD: virThreadHelper (virthread.c:206)
==19015== by 0xA1EE1F2: start_thread (in /lib64/libpthread-2.19.so)
==19015== by 0xA4EFC8C: clone (in /lib64/libc-2.19.so)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Instead of always using controller 0 and incrementing port number,
respect the maximum port numbers of controllers and use all of them.
Ports for virtio consoles are quietly reserved, but not formatted
(neither in XML nor on QEMU command line).
Also rejects duplicate virtio-serial addresses.
https://bugzilla.redhat.com/show_bug.cgi?id=890606https://bugzilla.redhat.com/show_bug.cgi?id=1076708
Test changes:
* virtio-auto.args
Filling out the port when just the controller is specified.
switched from using
maxport + 1
to:
first free port on the controller
* virtio-autoassign.args
Filling out the address when no <address> is specified.
Started using all the controllers instead of 0, also discards
the bus value.
* xml -> xml output of virtio-auto
The port assignment is no longer done as a part of XML parsing,
so the unspecified values stay 0.
Starting a qemu VM with a memory module that has the base address
specified results in the following error:
error: internal error: early end of file from monitor: possible problem:
2015-03-26T03:45:52.338891Z qemu-kvm: -device pc-dimm,node=0,memdev=memdimm0,
id=dimm0,slot=0,base=4294967296: Property '.base' not found
The correct property name for the base address is 'addr'.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Because of the microcode update to Haswell/Broadwell CPUs, existing
domains using these CPUs may fail to start even though they used to run
just fine. To help users solve this issue we try to suggest switching to
-noTSX variant of the CPU model:
virsh # start cd
error: Failed to start domain cd
error: unsupported configuration: guest and host CPU are not
compatible: Host CPU does not provide required features: rtm, hle;
try using 'Haswell-noTSX' CPU model
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Use the virStorageSourceIsEmpty helper to determine whether the drive
source is empty rather than checking for src->path. This will fix start
of VM with empty network cdrom that would not report any error.
The function that formats the string for network drives would return
error code but did not set the error message when called on storage
source with VIR_STORAGE_NET_PROTOCOL_LAST or _NONE.
Report an error in this case if it would ever be called in that way.
When starting a VM with hotpluggable memory devices the user may specify
an invalid source NUMA node. Libvirt would pass through the error from
qemu:
# virsh start test3
error: Failed to start domain test3
error: internal error: process exited while connecting to monitor:
2015-03-25T01:12:17.205913Z qemu-kvm: -object memory-backend-ram,id=memdimm0
,size=536870912,host-nodes=1-3,policy=bind: cannot bind memory to host NUMA nodes:
Invalid argument
This patch adds a check that allows to report better error:
# virsh start test3
error: Failed to start domain test3
error: configuration unsupported: NUMA node 1 is unavailable
Signed-off-by: Luyao Huang <lhuang@redhat.com>
by rewriting it completely from:
error: unsupported configuration: virtio only support device address
type 'PCI'
to:
error: unsupported configuration: virtio disk cannot have an address of type
drive
Since we now support CCW addresses as well.
Add support to start qemu instance with 'pc-dimm' device. Thanks to the
refactors we are able to reuse the existing function to determine the
parameters.
To enable memory hotplug the maximum memory size and slot count need to
be specified. As qemu supports now other units than mebibytes when
specifying memory, use the new interface in this case.
In the last section if the function determines that the config is
invalid when QEMU doesn't support the memory device the JSON config
object would be returned even if it doesn't make sense.
Assign the object to be returned only on success.
Problem Description:
When we set boot order for a vhost-user network interface, we found the boot index
doesn't work.
Cause of the Problem:
In the function qemuBuildVhostuserCommandLine(), it forcely set the arg bootindex of
function qemuBuildNicDevStr() to 0. Thus, the bootindex parameter got missing.
Solution:
Trans the arg bootindex down.
Signed-off-by: Gao Haifeng <gaohaifeng.gao@huawei.com>
Signed-off-by: Zhang Bo <oscar.zhangbo@huawei.com>
The memory sizes in qemu are aligned up to 1 MiB boundaries. There are
two places where this was done once for the total size and then for
individual NUMA cell sizes.
Add a function that will align the sizes in one place so that it's clear
where the sizes are aligned.
As there are two possible approaches to define a domain's memory size -
one used with legacy, non-NUMA VMs configured in the <memory> element
and per-node based approach on NUMA machines - the user needs to make
sure that both are specified correctly in the NUMA case.
To avoid this burden on the user I'd like to replace the NUMA case with
automatic totaling of the memory size. To achieve this I need to replace
direct access to the virDomainMemtune's 'max_balloon' field with
two separate getters depending on the desired size.
The two sizes are needed as:
1) Startup memory size doesn't include memory modules in some
hypervisors.
2) After startup these count as the usable memory size.
Note that the comments for the functions are future aware and document
state that will be present after a few later patches.
We interpret port values as signed int (convert them from char *),
so if a negative value is provided in network disk's configuration,
we accept it as valid, however there's an 'unknown cause' error raised later.
This error is only accidental because we return the port value in the return code.
This patch adds just a minor tweak to the already existing check so we
reject negative values the same way as we reject non-numerical strings.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1163553
Error messages are already set in all code paths returning -1 from
networkGetNetworkAddress, so we don't want to overwrite them.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
Commit 4bbe1029f fixed a problem in commit f7afeddc by moving the call
to virNetDevGetIndex() to a location common to all interface types (so
that the nicindex array would be filled in for macvtap as well as tap
interfaces), but the location was *too* common, as the original call
to virNetDevGetIndex() had been in a section qualified by "if
(cfg->privileged)". The result was that the "fixed" libvirtd would try
to call virNetDevGetIndex() even for session mode libvirtd, and end up
failing with the log message:
Unable to open control socket: Operation not permitted
To remedy that, this patch qualifies the call to virNetDevGetIndex()
in its new location with cfg->privileged.
This resolves https://bugzilla.redhat.com/show_bug.cgi?id=1198244
There was a mess in the way how we store unlimited value for memory
limits and how we handled values provided by user. Internally there
were two possible ways how to store unlimited value: as 0 value or as
VIR_DOMAIN_MEMORY_PARAM_UNLIMITED. Because we chose to store memory
limits as unsigned long long, we cannot use -1 to represent unlimited.
It's much easier for us to say that everything greater than
VIR_DOMAIN_MEMORY_PARAM_UNLIMITED means unlimited and leave 0 as valid
value despite that it makes no sense to set limit to 0.
Remove unnecessary function virCompareLimitUlong. The update of test
is to prevent the 0 to be miss-used as unlimited in future.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1146539
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Pass the TPM file descriptor to QEMU via command line.
Instead of passing /dev/tpm0 we now pass /dev/fdset/10 and the additional
parameters -add-fd set=10,fd=20.
This addresses the use case when QEMU is started with non-root privileges
and QEMU cannot open /dev/tpm0 for example.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1142631
This patch resolves a situation where the same "<target dev='$name'...>"
can be used for multiple disks in the domain.
While the $name is "mostly" advisory regarding the expected order that
the disk is added to the domain and not guaranteed to map to the device
name in the guest OS, it still should be unique enough such that other
domblk* type operations can be performed.
Without the patch, the domblklist will list the same Target twice:
$ virsh domblklist $dom
Target Source
------------------------------------------------
sda /var/lib/libvirt/images/file.qcow2
sda /var/lib/libvirt/images/file.img
Additionally, getting domblkstat, domblkerror, domblkinfo, and other block*
type calls will not be able to reference the second target.
Fortunately, hotplug disallows adding a "third" sda value:
$ qemu-img create -f raw /var/lib/libvirt/images/file2.img 10M
$ virsh attach-disk $dom /var/lib/libvirt/images/file2.img sda
error: Failed to attach disk
error: operation failed: target sda already exists
$
BUT, it since 'sdb' doesn't exist one would get the following on the same
hotplug attempt, but changing to use 'sdb' instead of 'sda'
$ virsh attach-disk $dom /var/lib/libvirt/images/file2.img sdb
error: Failed to attach disk
error: internal error: unable to execute QEMU command 'device_add': Duplicate ID 'scsi0-0-1' for device
$
Since we cannot fix this issue at parsing time, the best that can be done so
as to not "lose" a domain is to make the check prior to starting the guest
with the results as follows:
$ virsh start $dom
error: Failed to start domain $dom
error: XML error: target 'sda' duplicated for disk sources '/var/lib/libvirt/images/file.qcow2' and '/var/lib/libvirt/images/file.img'
$
Running 'make check' found a few more instances in the tests where this
duplicated target dev value was being used. These also exhibited some
duplicated 'id=' values (negating the uniqueness argument of aliases) in
the corresponding .args file and of course the *xmlout version of a few
input XML files.
If we combine the boot order on the command line with other
boot options, we prepend order= in front of it.
Instead of checking if the number of added arguments is between
0 and 2, separate the strings for boot order and options
and prepend boot order only if both strings are not empty.
Commit f7afeddc added code to report to systemd an array of interface
indexes for all tap devices used by a guest. Unfortunately it not only
didn't add code to report the ifindexes for macvtap interfaces
(interface type='direct') or the tap devices used by type='ethernet',
it ended up sending "-1" as the ifindex for each macvtap or hostdev
interface. This resulted in a failure to start any domain that had a
macvtap or hostdev interface (or actually any type other than
"network" or "bridge").
This patch does the following with the nicindexes array:
1) Modify qemuBuildInterfaceCommandLine() to only fill in the
nicindexes array if given a non-NULL pointer to an array (and modifies
the test jig calls to the function to send NULL). This is because
there are tests in the test suite that have type='ethernet' and still
have an ifname specified, but that device of course doesn't actually
exist on the test system, so attempts to call virNetDevGetIndex() will
fail.
2) Even then, only add an entry to the nicindexes array for
appropriate types, and to do so for all appropriate types ("network",
"bridge", and "direct"), but only if the ifname is known (since that
is required to call virNetDevGetIndex().
If the qemu binary on x86 does not support lsi SCSI controller,
but it supports virtio-scsi, we reject the virtio-specific attributes
for no reason.
Move the default controller assignment before the check.
https://bugzilla.redhat.com/show_bug.cgi?id=1168849
Since s390 does not support usb the default creation of a usb controller
for a domain should not occur.
Also adjust s390 test cases by removing usb device instances since
usb devices are no longer created by default for s390 the s390
test cases need to be adjusted.
Signed-off-by: Stefan Zimmermann <stzi@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
For historical reasons data regarding NUMA configuration were split
between the CPU definition and numatune. We cannot do anything about the
XML still being split, but we certainly can at least store the relevant
data in one place.
This patch moves the NUMA stuff to the right place.
Name it virNumaMemAccess and add it to conf/numa_conf.[ch]
Note that to avoid a circular dependency the type of the NUMA cell
memAccess variable was changed to int. It will be turned back later
after the circular dependency will not exist.
PowerPC : Forbid NULL CPU model with 'host-model' mode in qemu command line.
This ensures that an XML such as following:
...
<cpu mode='host-model'>
<model fallback='allow'/>
</cpu>
...
will not generate a '-cpu host,compat=(null)' command line with qemu-system-ppc64.
Signed-off-by: Prerna Saxena <prerna@linux.vnet.ibm.com>
So, when building the '-numa' command line, the
qemuBuildMemoryBackendStr() function does quite a lot of checks to
chose the best backend, or to check if one is in fact needed. However,
it returned that backend is needed even for this little fella:
<numatune>
<memory mode="strict" nodeset="0,2"/>
</numatune>
This can be guaranteed via CGroups entirely, there's no need to use
memory-backend-ram to let qemu know where to get memory from. Well, as
long as there's no <memnode/> element, which explicitly requires the
backend. Long story short, we wouldn't have to care, as qemu works
either way. However, the problem is migration (as always). Previously,
libvirt would have started qemu with:
-numa node,memory=X
in this case and restricted memory placement in CGroups. Today, libvirt
creates more complicated command line:
-object memory-backend-ram,id=ram-node0,size=X
-numa node,memdev=ram-node0
Again, one wouldn't find anything wrong with these two approaches.
Both work just fine. Unless you try to migrated from the older libvirt
into the newer one. These two approaches are, unfortunately, not
compatible. My suggestion is, in order to allow users to migrate, lets
use the older approach for as long as the newer one is not needed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Export the required helpers and add backend code to hotplug RNG devices.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
As the RNG device is using an -object as backend refactor the code to
use the JSON to commandline generator so that we can reuse the code
later in hotplug.
Move the alias name right after the object type for rng-egd backend so
that we can later use the JSON to commandline generator to create the
command line.
Libvirt didn't prefix the random number generator backend object alias
with any string thus the device alias and object alias were identical.
To avoid possible problems, rename the alias for the backend object and
tweak tests to comply with the change.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Rename qemuBuildRNGDeviceArgs to qemuBuildRNGDevStr and change the
return type so that it can be reused in the device hotplug code later.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
This function is used to assign an alias for a RNG device. It will be
later reused when hotplugging RNGs.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
It is only usable for NETWORK and BRIDGE type interfaces.
Error out when trying to start a domain where the custom
tap device path is specified for interfaces of other types,
or when the daemon is not privileged.
Note that this cannot be checked at definition time, because
the comparison is against actual type.
https://bugzilla.redhat.com/show_bug.cgi?id=1147195
Some code paths have special logic depending on the page size
reported by sysconf, which in turn affects the test results.
We must mock this so tests always have a consistent page size.
Change done by commit f309db1f4d wrongly
assumes that qemu can start with a combination of NUMA nodes specified
with the "memdev" option and the appropriate backends, and the legacy
way by specifying only "mem" as a size argument. QEMU rejects such
commandline though:
$ /usr/bin/qemu-system-x86_64 -S -M pc -m 1024 -smp 2 \
-numa node,nodeid=0,cpus=0,mem=256 \
-object memory-backend-ram,id=ram-node1,size=12345 \
-numa node,nodeid=1,cpus=1,memdev=ram-node1
qemu-system-x86_64: -numa node,nodeid=1,cpus=1,memdev=ram-node1: qemu: memdev option must be specified for either all or no nodes
To fix this issue we need to check if any of the nodes requires the new
definition with the backend and if so, then all other nodes have to use
it too.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1182467
With the new JSON to argv formatter we are now able to represent the
memory backend definitions in the JSON object format that is reusable
for monitor use (hotplug) and then convert it into the shell string.
This will avoid having two separate instances of the same code that
would create the different formats.
Previous refactors now allow to make this step without changes to the
test suite.
QEMU's command line visitor as well as the JSON interface take bytes by
default for memory object sizes. Convert mebibytes to bytes so that we
can later refactor the existing code for hotplug purposes.
QEMU's qapi visitor code allows yes/on/y for true and no/off/n for false
value of boolean properities. Unify the used style so that we can
generate it later and fix test cases.
Extract the memory backend device code into a separate function so that
it can be later easily refactored and reused.
Few small changes for future reusability, namely:
- new (currently unused) parameter for user specified page size
- size of the memory is specified in kibibytes, divided up in the
function
- new (currently unused) parameter for user specifed source nodeset
- option to enforce capability check
Unlike -device, qemu uses a JSON object to add backend "objects" via the
monitor rather than the string that would be passed on the commandline.
To be able to reuse code parts that configure backends for various
devices, this patch adds a helper that will allow generating the command
line representations from the JSON property object.
For distros that want to add versioned machine types, they will add
(downstream) machine types like "virt-foo-1.2.3". Detect these as
MMIO too.
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Previous patch of this series fixed the issue with adding a new PCI bridge
when all the slots were reserved by devices with user specified addresses.
In case there are still some PCI devices waiting to get a slot reserved
by qemuAssignDevicePCISlots, this means a new bus needs to be
created along with a corresponding bridge controller. By adding an
additional check, this scenario now results in a reasonable error
instead of generating wrong qemu command line.
Commit 93c8ca tried to fix the issue with auto-adding of a PCI bridge
controller, but didn't work properly in all scenarios.
This patch provides a better fix of the issue when all slots on a PCI bus
are reserved by devices with user specified addresses and no additional
bridges need to be created.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1132900
In order to be able to test for fully reserved PCI buses, assignment of
PCI slots for integrated devices needs to be moved to a separate function.
This also might be a good preparation if we decide to add support for
other chipsets as well.
Move qemuDomainAssignPCIAddresses after the definition
of the static function qemuDomainValidateDevicePCISlotsQ35.
This lets us define a new static function using
qemuDomainValidateDevicePCISlots* and use it in
qemuDomainAssignPCIAddresses without a forward declaration.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
As it turned out, fix of dead code 419a22 changed the affected condition
from "never true" to "always true", so better fix would be to change the
return code of virDomainMaybeAddController from 0 to 1 if
a new bridge has been added, thus distinguishing case when we didn't need to
add any controller and case we successfully added one.
The return code is changed in the next commit
https://bugzilla.redhat.com/show_bug.cgi?id=1164627
When using 'virsh attach-device' to hotplug an unsupported console type
into a qemu guest the attachment would succeed as the command line
formatter didn't report error in such case.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1130390
The listen address is not mandatory for <interface type='server'>
but when it's not specified, we've been formatting it as:
-netdev socket,listen=(null):5558,id=hostnet0
which failed with:
Device 'socket' could not be initialized
Omit the address completely and only format the port in the listen
attribute.
Also fix the schema to allow specifying a model.
Ploop is a pseudo device which makeit possible to access
to an image in a file as a block device. Like loop devices,
but with additional features, like snapshots, write tracker
and without double-caching.
It used in PCS for containers and in OpenVZ. You can manage
ploop devices and images with ploop utility
(http://git.openvz.org/?p=ploop).
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
We tested for positive return value from virDomainMaybeAddController,
but it returns 0 or -1 only resulting in a dead code.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In case we find out, there are more PCI devices to be connected
than there are available slots on the default PCI bus, we automatically add a
new bus and a related PCI bridge controller as well. As there are no free slots
left on the default PCI bus, PCI bridge controller gets a free slot on a
newly created PCI bus which causes qemu to refuse to start the guest.
This fix introduces a new function qemuDomainPCIBusFullyReserved which
is checked right before we possibly try to reserve a slot for PCI bridge
controller.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1132900
https://bugzilla.redhat.com/show_bug.cgi?id=1165993
So, there are still plenty of vNIC types that we don't know how to set
bandwidth on. Let's warn explicitly in case user has requested it
instead of pretending everything was set.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
