This introduces intermediate static library that is required for
following remote protocol check.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
We have to compile the libvirt-admin.so outside of src/admin directory
because it depends on libvirt.so.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
There are two extra dependencies compared to automake, apparmor and
selinux. It looks like libtool is doing some magic and inheriting
dependencies from libvirt.la which inherits these dependencies from
other libraries.
Without these two dependencies in meson the compilation fails.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Drop automake like print from scripts/hyperv_wmi_generator.py as well.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Drop automake like print from scripts/esx_vi_generator.py as well.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
WARN_FLAGS are not relevant for meson as all warning flags are set to
the whole project using add_project_arguments().
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Meson doesn't use .libs directory, everything is placed directly into
directories where meson.build file is used.
In order to have working tests and running libvirt directly from GIT we
need to fix all the paths pointing '.libs' directory.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
With meson we no longer have .libs directory with the actual binary so
we have to take a different approach to detect if running from build
directory.
This is not as robust as for autotools because if you select --prefix
in the build directory it will incorrectly enable the override as well
but nobody should do that.
We have to modify some of the tests to not add current build path into
PATH variable and use the full path for virsh instead. Otherwise it
would be impossible to figure out that we are running virsh from build
directory.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
There is no point of having this option in libvirt because the debug
logs can be configured using log filters.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
EXTRA_DIST is not relevant because meson makes a git copy when creating
dist archive so everything tracked by git is part of dist tarball.
The remaining ones are not converted to meson files as they are
automatically tracked by meson.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
After the switch to libnl these are no longer used.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Fixes: 77e7c13b2e
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
After dropping support for sanlock < 2.4,
this constant is no longer used.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Fixes: c495169478
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
When trying to parse an XML with overlapping iothread scheduler
settings, the error message was rather confusing:
error: iothreadssched attributes 'vcpus' must not overlap
Pass the correct element name.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Pass the scheduler element name instead of trying to reconstructing
it from the attribute name.
This has the benefit of not mixing '%s' with regular text in
translatable strings as well as preventing the confusion when
the 's' marking the plural in the element name ('vcpus') is taken
as a first letter of the 'sched' suffix.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Fixes: 7ea55a481d
Fixes: 99c5fe0e7c
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
virDomainThreadSchedParseHelper is used for parsing both iothread
and vcpu scheduling settings. Rename its 'name' attribute to
make it obvious this refers to the attribute name, not the name of
the element (which is currently constructed from the attribute name).
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When doing an external snapshot we migrate memory to a file as a form of
taking the memory state. This creates a problem as qemu deactivates all
active bitmaps after a successful migration. This means that calling
'query-named-block-nodes' will return an empty list of bitmaps for
devices. We use the bitmap list to propagate the active bitmaps into the
overlay files being created which is required for backups to work after
a snapshot. Since we wouldn't propagate anything a subsequent backup
will fail with:
invalid argument: missing or broken bitmap 'testchck' for disk 'vda'
To fix this, we can simply collect the bitmap list prior to the
migration.
https://bugzilla.redhat.com/show_bug.cgi?id=1862472
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
virPCIDeviceAddressPtr 'addr' is forgotten to be freed in the branch
'VIR_APPEND_ELEMENT() < 0'. Use g_autoptr instead.
Signed-off-by: Hao Wang <wanghao232@huawei.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use g_autoptr to free the temporary virDomainDef object created by
qemuDomainSaveInternal() when xmlin is non-NULL. Leak was added in
commit 0ea479f8f6, first appearing in libvirt 0.9.4 in August 2011.
Signed-off-by: Zheng Chuan <zhengchuan@huawei.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The term number is used for other stats and even for hugetlb
stats in virsh man page. The term number is also more clear.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
CVE-2020-14339
When building domain's private /dev in a namespace, libdevmapper
is consulted for getting full dependency tree of domain's disks.
The reason is that for a multipath devices all dependent devices
must be created in the namespace and allowed in CGroups.
However, this approach is very fragile as building of namespace
happens in the forked off child process, after mass close of FDs
and just before dropping privileges and execing QEMU. And it so
happens that when calling libdevmapper APIs, one of them opens
/dev/mapper/control and saves the FD into a global variable. The
FD is kept open until the lib is unlinked or dm_lib_release() is
called explicitly. We are doing neither.
However, the virDevMapperGetTargets() function is called also
from libvirtd (when setting up CGroups) and thus has to be thread
safe. Unfortunately, libdevmapper APIs are not thread safe (nor
async signal safe) and thus we can't use them. Reimplement what
libdevmapper would do using plain C (ioctl()-s, /proc/devices
parsing, /dev/mapper dirwalking, and so on).
Fixes: a30078cb83
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1858260
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Since we have VIR_AUTOSTRINGLIST we can use it to free string
lists used in the function automatically.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
There are two distinct WITH_DEVMAPPER sections in the file, for
different functions each. Rearrange the code to make some of
future commits smaller.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The storage pool code now attempts to disable COW by default on btrfs,
but management applications may wish to override this behaviour. Thus we
introduce a concept of storage pool features:
<features>
<cow state='yes|no'/>
</features>
If the <cow> feature policy is set, it will be enforced. It will always
return an hard error if COW cannot be explicitly set or unset.
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This calls virFileSetCOW when building a pool with a request to attempt,
but not require, COW to be disabled. The effect is that nothing changes
on non-btrfs filesystems, but btrfs will get COW disabled on the
directory. This setting is then inherited by all newly created files in
the pool, avoiding the need for mgmt app to set "nocow" on a per-volume
basis.
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When disabling COW on individual files, we now use the virFileSetCOW
method. Note that this change has a slight semantic difference to the
old implementation.
The original code reported errors but returned success when disabling
COW failed.
With this new code, we will always report an error if the user requested
disabling of COW and we could not honour it, either because btrfs
returned an error, or because the filesystem is not btrfs.
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
btrfs defaults to performing copy-on-write for files. This is often
undesirable for VM images, so we need to be able to control whether this
behaviour is used.
The virFileSetCOW() will allow for this. We use a tristate, since out of
the box, we want the default behaviour attempt to disable cow, but only
on btrfs, silently do nothing on non-btrfs. If someone explicitly asks
to disable/enable cow, then we want to raise a hard error on non-btrfs.
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is only used in the ESX driver where, when set to "no", it will
ignore all the checks libvirt does about the origin of the MAC address
(whether or not it's in a VMWare OUI) and forward the original one to
the ESX server telling it not to check it either.
This allows keeping a deterministic MAC address which can be useful for
licensed software which might dislike changes.
Signed-off-by: Bastien Orivel <bastien.orivel@diateam.net>
VMX conversion parts rewritten to apply on top of previously merged
support for type='generated|static'
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When support for MAC addresses having a type='static|generated'
attribute was added in:
commit 454e5961ab
Author: Bastien Orivel <bastien.orivel@diateam.net>
Date: Mon Jul 13 16:28:53 2020 +0200
Add a type attribute on the mac address element
the VMX -> XML parser was not updated. As a result while we
accept the 'type' attribute on input, we never show it again
on 'output', so we loose information during the roundtrip.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
With the current formatter, the XML snippets:
<interface type='bridge'>
<mac address='00:0c:29:dd:ee:fe' type='static'/>
<source bridge='br1'/>
</interface>
<interface type='bridge'>
<mac address='aa:bb:cc:dd:ee:fd' type='generated'/>
<source bridge='br2'/>
</interface>
result in
ethernet1.present = "true"
ethernet1.networkName = "br1"
ethernet1.connectionType = "bridged"
ethernet1.addressType = "static"
ethernet1.address = "00:0c:29:dd:ee:fe"
ethernet1.checkMACAddress = "false"
ethernet2.present = "true"
ethernet2.networkName = "br2"
ethernet2.connectionType = "bridged"
ethernet2.addressType = "static"
ethernet2.address = "aa:bb:cc:dd:ee:fd"
ethernet2.checkMACAddress = "false"
which is flawed, as both type='static' and type='generated' in the XML
turn into 'static' in the VMX config.
The existence of the 'static' attribute is further overriding whether
the checkMACAddress config option is set as a side effect.
Both these pieces of flawed logic were introduced in
commit 454e5961ab
Author: Bastien Orivel <bastien.orivel@diateam.net>
Date: Mon Jul 13 16:28:53 2020 +0200
Add a type attribute on the mac address element
which intentionally added the 'checkMACAddress' side effect based on
the 'type' attribute.
With this change, we're reverting the handling of checkMACAddress
to match what existed historically. The 'type' attribute now directly
maps to the addressType attribute, so the above config becomes:
ethernet1.present = "true"
ethernet1.networkName = "br1"
ethernet1.connectionType = "bridged"
ethernet1.addressType = "static"
ethernet1.address = "00:0c:29:dd:ee:fe"
ethernet2.present = "true"
ethernet2.networkName = "br2"
ethernet2.connectionType = "bridged"
ethernet2.addressType = "generated"
ethernet2.generatedAddress = "aa:bb:cc:dd:ee:fd"
ethernet2.generatedAddressOffset = "0"
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
gcc 10.1.0 on Debian sid has a bug where the bounds checking gets
confused beteen two branches:
In file included from /usr/include/string.h:495,
from ../../src/internal.h:28,
from ../../src/util/virsocket.h:21,
from ../../src/util/virsocketaddr.h:21,
from ../../src/util/virnetdevip.h:21,
from ../../src/util/virnetdevip.c:21:
In function 'memcpy',
inlined from 'virNetDevGetifaddrsAddress' at ../../src/util/virnetdevip.c:914:13,
inlined from 'virNetDevIPAddrGet' at ../../src/util/virnetdevip.c:962:16:
/usr/include/arm-linux-gnueabihf/bits/string_fortified.h:34:10: error: '__builtin_memcpy' offset [16, 27] from the object at 'addr' is out of the bounds of referenced subobject 'inet4' with type 'struct sockaddr_in' at offset 0 [-Werror=array-bounds]
34 | return __builtin___memcpy_chk (__dest, __src, __len, __bos0 (__dest));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from ../../src/util/virnetdevip.h:21,
from ../../src/util/virnetdevip.c:21:
../../src/util/virnetdevip.c: In function 'virNetDevIPAddrGet':
../../src/util/virsocketaddr.h:29:28: note: subobject 'inet4' declared here
29 | struct sockaddr_in inet4;
| ^~~~~
cc1: all warnings being treated as errors
Note the source location is pointing to the "inet6" / AF_INET6 branch of
the "if", but is complaining about bounds of the "inet4" field. Changing
the code into a switch() is sufficient to avoid triggering the bug and
is arguably better code too.
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
There are races condiction to make '/run/libvirt/qemu/dbus' directory in
virDirCreateNoFork() while concurrent start VMs, and get "failed to create
directory '/run/libvirt/qemu/dbus': File exists" error message. pre-create the
dbus directory in qemuStateInitialize.
Signed-off-by: Bihong Yu <yubihong@huawei.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Remove the superfuous break, as there is a 'return' before it.
Signed-off-by: Liao Pingfang <liao.pingfang@zte.com.cn>
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Remove superfluous breaks, as there is a "return" before them.
Signed-off-by: Liao Pingfang <liao.pingfang@zte.com.cn>
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Remove superfluous breaks, as there is a "return" before them.
Signed-off-by: Liao Pingfang <liao.pingfang@zte.com.cn>
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Since active domains which do not have the attribute already set were
not started by libvirt that probed for CPU migratable property, we need
to check this property on reconnect and update the domain definition
accordingly.
https://bugzilla.redhat.com/show_bug.cgi?id=1857967
Reported-by: Mark Mielke <mark.mielke@gmail.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Commit v6.4.0-61-g201bd5db63 started to fill the default value for
//cpu/@migratable attribute according to QEMU support. However, active
domains either have the migratable attribute already set or the
capabilities we use for checking the QEMU support were created by older
libvirt which didn't probe for this specific capability. Thus we should
leave active domains alone when parsing their XMLs.
https://bugzilla.redhat.com/show_bug.cgi?id=1857967
Reported-by: Mark Mielke <mark.mielke@gmail.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Use g_auto* on pointers to avoid using the 'cleanup' label.
In theory the 'ret' variable can also be discarded if the flow
of the logic is reworked. Perhaps another time.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20200717211556.1024748-5-danielhb413@gmail.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Use g_autoptr() on pointers and remove the unneeded 'cleanup' label.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20200717211556.1024748-4-danielhb413@gmail.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Use g_autoptr() and remove the 'cleanup' label.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20200717211556.1024748-3-danielhb413@gmail.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Next patches will use g_autoptr() in qemuProcessQMPPtr pointers
for some cleanups in QMP code.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20200717211556.1024748-2-danielhb413@gmail.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Refactor networkSetIPv6Sysctls to remove repetition and reuse
of the 'field' variable.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Ignore errors from creating "libvirt-tmp-activewrite" bitmap. This
prevents failures of finishing blockjobs if the bitmap already exists.
Note that if the bitmap exists, the worst case that can happen is that
more bits are marked as dirty in the resulting merge.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
There are two possible 'transaction' command arguments in the function.
Rename 'actions' as they deal with creating bitmaps only.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The 'libvirt-tmp-activewrite' bitmap is added during the 'pivot'
operation of block copy and active layer block commit operations
regardless of whether there are any bitmaps to merge, but was not
removed unless a bitmap was merged. This meant that subsequent attempts
to merge into the same image would fail.
Fix it by checking whether the 'libvirt-tmp-activewrite' would be used
by the code and don't skip the code which would delete it.
This is a regression introduced when we switched to the new code for
block commit in <20a7abc2d2d> and for block copy in <7bfff40fdfe5>. The
actual bug originates from <4fa8654ece>.
https://bugzilla.redhat.com/show_bug.cgi?id=1857735
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Commit 20a7abc2d2 tried to delete the possibly leftover bitmap but
neglected to call the actual monitor to do so.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The handler finalizing the active layer block commit doesn't actually
reopen the file for active layer block commit, so the comment and check
are invalid.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The infrastructure supports setting the threshold also for the <mirror>.
Mention it in the docs.
https://bugzilla.redhat.com/show_bug.cgi?id=1807741
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
When doing a block copy, there is another chain of images attached to a
disk. Consider them as well when looking up a disk using nodename.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Top level image may get two events, one with the disk target (vda) and
one with disk target with index (vda[3]) if the top level image has an
index.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The index returned by qemuDomainDiskLookupByNodename is the position in
the backing chain rather than the index we report in the XML.
Since with -blockdev they differ now and additionally the disk source
also has an index we need to fix the 'threshold' events we report:
1) If it's the top level image we must always trigger the event without
any suffix as we did until now
2) We must report the correct index
3) We must report the correct index also for the top level image, when
blockdev is used.
This means that we need to potentially emit 2 events, one for the device
without the index and then when blockdev is used and the top level image
has an index we must do it also with the index.
This will fix it for blockdev cases, while also not removing previous
semantics.
https://bugzilla.redhat.com/show_bug.cgi?id=1857204
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Rather than having labels named exit, done, exit_snooprequnlock,
skip_rename, etc, use the standard "cleanup" label. And instead of
err_exit, malformed, tear_down_tmpebchains, use "error".
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This rewrite of a nested conditional produces the same results, but
eliminate a goto and corresponding label.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It's possible/probable the callers to virNWFilterInstReset() make it
unnecessary to set the object's nrules to 0 after freeing all its
rules, but that same function is setting nfilters to 0, so let's do
the same for the sake of consistency.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
On failure, this function would clear out and free the list of
subchains it had been called with. This is unnecessary, because the
*only* caller of this function will also clear out and free the list
of subchains if it gets a failure from ebtablesGetSubChainInsts().
(It also makes more logical sense for the function that is creating
the entire list to be the one freeing the entire list, rather than
having a function whose purpose is only to create *one item* on the
list freeing the entire list).
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko redhat com>
All these cleanup/error labels were reduced to having just "return
ret" by a previous patch, so get rid of them and return directly.
This patch coincidentally fixes a bug in
networkFindUnusedBridgeName(), where we would log an error yet still
return success if we failed to find a single unused "virbrNNN" name
after checking all values of "N" from 0 - 256. Said bug was introduced
when that function was originally written, in commit a28d3e485f
(libvirt 1.2.15, 2015)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This includes standard g_autofree() as well as other objects that have
a cleanup function defined to use via g_autoptr (virCommand,
virJSONValue)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virNetworkDHCPLease and virNetworkDHCPLeaseFree() are declared in the
public API file libvirt-network.h, and we can't pollute that with glib
macro invocations, so put this in src/datatypes.h next to the other
virNetwork items.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
g_new() is used in only 3 places. Switching them to g_new0() will do
no harm, reduces confusion, and helps me sleep better at night knowing
that all allocated memory is initialized to 0 :-) (Yes, I *know* that
in all three cases the associated memory is immediately assigned some
other value. Today.)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
To remove dependecy of `qemuDomainJob` on job specific
paramters, a `privateData` pointer is introduced.
To handle it, structure of callback functions is
also introduced.
Signed-off-by: Prathamesh Chavan <pc44800@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In 9536379da4 and 8b0cb0e666 I've tried to call
virNetSocketCheckProtocolByLookup() only if we are suspecting the
host is IPv4 or IPv6 capable (because we've found an interface
with such address). However, the code was missing dereference of
the boolean variables and thus was comparing pointers against
NULL.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This partially reverts commit 5331c4804f.
The original commit mistakenly thought virFileCacheLookup did not set
an error. In fact the only case it doesn't set an error for is when
the cache key is NULL. This in fact the fault of the caller for passing
an invalid cache key, so doesn't need to be handled.
This caller bug was fixed by checking for a NULL binary in the
virQEMUCapsCacheLookupDefault method.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Conver the code to the new approach which uses XPath to fetch known
elements rather than looping through all XML children.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use a switch statement which will not be omitted when adding potential
new types.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similarly to previous commit split out formatting of the mdev subsystem
related stuff.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similarly to previous commit split out formatting of the vHBA subsystem
related stuff.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Split up formatting of the '<address>' element rather that trying to
optimize it with formatting string hacks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similarly to previous commit split out formatting of the SCSI subsystem
related stuff.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similarly to previous commit split out formatting of the PCI subsystem
related stuff.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Separate out bits related to USB so that the logic isn't entangled in
multiple conditional statements.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Refactor the formatter to the new multiple buffer based approach so that
we can easily separate it into formatters per subsys type.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similarly to previous commits, modify the hostdev detach code to use
blockdev infrastructure to detach (i)SCSI hostdevs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similarly to command line creation, use the blockdev helpers when
hotplugging an (i)SCSI hostdev.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In preparation for instantiating (i)SCSI hostdevs via -blockdev,
refactor qemuBuildHostdevSCSICommandLine to use the new infrastructure
which will do it automatically.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add convertor for creating qemuBlockStorageSourceAttachData which will
allow reusing the infrastructure which we have for attaching disks also
for hostdevs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We want to instantiate hostdevs via -blockdev too. Add a separate
capability for them for a clean transition. The new capability will be
enabled when QEMU_CAPS_BLOCKDEV is present once all code is prepared.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Don't (re)generate the backend alias (alias of the -drive backend for
now) internally but rather pass it in. Later on it will be replaced by
the nodename when blockdev is used depending on the capabilities.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move all (i)SCSI related code into a new function named
'qemuBuildHostdevSCSICommandLine'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We now store the alias of the secrets in the status XML so there's no
need to generate it again.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When upgrading from a libvirt which didn't format private data of a
virStorageSource representing an iSCSI hostdev source, we might need to
generate some internal data so that the code still works as if it was
present in the status XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We need the alias to deal with hot-unplug of the hostdev. Use
qemuDomainSecretInfoDestroy which clears only the secrets and not the
alias. The same function is used also for handling disk secrets.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We store the config of an iSCSI hostdev in a virStorageSource structure.
Parse the private data portion.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
iSCSI subsystem hostdevs store the data as a virStorageSource. Format
the private data part of the virStorageSource in the appropriate place.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
SCSI hostdevs don't have a virStorageSource associated with the backend
in certain cases. Adding a separate field to hold memory for a copy of
the nodename of the storage backend will allow reusing the blockdev
machinery also for SCSI hostdevs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It doesn't make sense to format "discard" when doing a -blockdev backend
of scsi-generic used with SCSI hostdevs. Add a way to skip it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming commit will need to add another flag for the function so
convert it to a bitwise-or'd array of flags to prevent having 4
booleans.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Historically, if we found an interface with an IPv6 address we
did not blindly trust that host is IPv6 capable (as in we can
successfully translate IPv4 addresses) but used getaddrinfo() to
confirm it. Turns out, we have use the same argument for IPv4.
For instance, in an namespace created by the following steps,
getaddrinfo("127.0.0.1", ...) fails (demonstrating by "Socket
TCP/IPv4 Accept" test case failing in virnetsockettest):
unshare -n
ip link set lo up
ip link add dummy0 type dummy
ip link set dummy0 up
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There is not much sense trying to disprove host is IPv6 capable
if we know after first round (getifaddrs()) that is is not.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The virNetSocketCheckProtocols() function is supposed to tell
caller whether IPv4 and/or IPv6 is supported on the system. In
the initial round, it uses getifaddrs() to see if an interface
has IPv4/IPv6 address assigned and then to double check IPv6 it
uses getaddrinfo() to lookup IPv6 loopback address. Separate out
this latter code because it is going to be reused.
Since the original code lived under an #ifdef and the new
function doesn't it is marked as unused - because on some systems
it may be so.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Historically, we've used security_context_t for variables passed
to libselinux APIs. But almost 7 years ago, libselinux developers
admitted in their API that in fact, it's just a 'char *' type
[1]. Ever since then the APIs accept 'char *' instead, but they
kept the old alias just for API stability. Well, not anymore [2].
1: 9eb9c93275
2: 7a124ca275
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Choose a TPM 2 device for the backend as default for the CRB interface
since TPM 1.2 would not work.
This patch addresses BZ 1781913: https://bugzilla.redhat.com/show_bug.cgi?id=1781913
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
The firmware (SLOF) on QEMU for ppc64 does not support TPM 1.2, so
prevent the choice of TPM 1.2 when the SPAPR device model is chosen
and use a default of '2.0' (TPM 2) for the backend.
This patch addresses BZ 1781913: https://bugzilla.redhat.com/show_bug.cgi?id=1781913
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Move setting the TPM default version out of the validation function into
the post parse function.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Functions `qemuDomainObjPrivateXMLParseJob` and
`qemuDomainObjPrivateXMLFormatJob` are moved from
`qemu_domain` to `qemu_domainjob`.
Signed-off-by: Prathamesh Chavan <pc44800@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
`qemuDomainObjPrivatePtr` parameter was avoided being passed
as a paramter in functions `qemuDomainObjPrivateXMLParseJob`
and `qemuDomainObjPrivateXMLFormatJob`, as we already pass
`virDomainObjPtr`, which can be used to get `privateData`
pointer.
Signed-off-by: Prathamesh Chavan <pc44800@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
During disk hot plugging, qemuDomainAttachDeviceLive() adds the new
disk to the device list of the VM object. However, hot plugging
cdroms and floppies only updates the src variable of the original
disk device, so the newly generated disk object needs to be freed.
Signed-off-by: Jin Yan <jinyan12@huawei.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This is only used in the ESX driver where, when set to "static", it will
ignore all the checks libvirt does about the origin of the MAC address
(whether or not it's in a VMWare OUI) and forward the original one to
the ESX server telling it not to check it either.
This allows keeping a deterministic MAC address which can be useful for
licensed software which might dislike changes.
Signed-off-by: Bastien Orivel <bastien.orivel@diateam.net>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use g_autoptr() and remove both 'error' and 'cleanup' labels.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use g_autoptr() and remove the 'cleanup' label.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use g_autoptr() and remove the unneeded 'cleanup' label.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use g_autoptr() and remove the obsolete 'error' label.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use g_autoptr() and remove the 'cleanup' label.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Next patch will use g_autoptr() in a qemuMigrationCookiePtr pointer to
modernize qemuMigrationSrcBeginPhase().
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use g_autoptr() and remove the now obsolete 'cleanup' label.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use g_autoptr() and remove both 'cleanup' and 'error' labels.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use g_autoptr() and remove the 'cleanup' label.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use g_autofree and remove the 'cleanup' label.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use variable autocleanup and remove the now obsolete 'cleanup'
label.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use g_autoptr() on pointers and remove the unneeded 'cleanup'
label.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use g_autofree and remove the unneeded 'cleanup' label.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use g_autofree on strings and remove the 'done' label since it's
now unneeded.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use g_autoptr() and remove the 'cleanup' label.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add headers with declarations of geteuid/getegid
and virGetUserName/virGetGroupName.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
While moving the code, qemuDomainNamespace also was moved
to `qemu_domainjob`. Hence it is moved back to `qemu_domain`
where it will be more appropriate.
Signed-off-by: Prathamesh Chavan <pc44800@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
With meson introduction which is using the same CFLAGS for the whole
project some compilation errors were discovered. The wireshark plugin
library is the only one in tools directory that is not using AM_CFLAGS.
With the AM_CFLAGS we get these errors:
../../tools/wireshark/src/packet-libvirt.c: In function 'dissect_libvirt_fds':
../../tools/wireshark/src/packet-libvirt.c:348:31: error: unused parameter 'tvb' [-Werror=unused-parameter]
348 | dissect_libvirt_fds(tvbuff_t *tvb, gint start, gint32 nfds)
| ~~~~~~~~~~^~~
../../tools/wireshark/src/packet-libvirt.c:348:41: error: unused parameter 'start' [-Werror=unused-parameter]
348 | dissect_libvirt_fds(tvbuff_t *tvb, gint start, gint32 nfds)
| ~~~~~^~~~~
../../tools/wireshark/src/packet-libvirt.c:348:55: error: unused parameter 'nfds' [-Werror=unused-parameter]
348 | dissect_libvirt_fds(tvbuff_t *tvb, gint start, gint32 nfds)
| ~~~~~~~^~~~
At top level:
../../tools/wireshark/src/packet-libvirt.c:64:5: error: 'dissect_xdr_bool' defined but not used [-Werror=unused-function]
64 | dissect_xdr_##xtype(tvbuff_t *tvb, proto_tree *tree, XDR *xdrs, int hf) \
| ^~~~~~~~~~~~
../../tools/wireshark/src/packet-libvirt.c:88:1: note: in expansion of macro 'XDR_PRIMITIVE_DISSECTOR'
88 | XDR_PRIMITIVE_DISSECTOR(bool, bool_t, boolean)
| ^~~~~~~~~~~~~~~~~~~~~~~
../../tools/wireshark/src/packet-libvirt.c:64:5: error: 'dissect_xdr_float' defined but not used [-Werror=unused-function]
64 | dissect_xdr_##xtype(tvbuff_t *tvb, proto_tree *tree, XDR *xdrs, int hf) \
| ^~~~~~~~~~~~
../../tools/wireshark/src/packet-libvirt.c:86:1: note: in expansion of macro 'XDR_PRIMITIVE_DISSECTOR'
86 | XDR_PRIMITIVE_DISSECTOR(float, gfloat, float)
| ^~~~~~~~~~~~~~~~~~~~~~~
../../tools/wireshark/src/packet-libvirt.c:64:5: error: 'dissect_xdr_short' defined but not used [-Werror=unused-function]
64 | dissect_xdr_##xtype(tvbuff_t *tvb, proto_tree *tree, XDR *xdrs, int hf) \
| ^~~~~~~~~~~~
../../tools/wireshark/src/packet-libvirt.c:80:1: note: in expansion of macro 'XDR_PRIMITIVE_DISSECTOR'
80 | XDR_PRIMITIVE_DISSECTOR(short, gint16, int)
| ^~~~~~~~~~~~~~~~~~~~~~~
../../tools/wireshark/src/packet-libvirt.c: In function 'dissect_libvirt_message':
../../tools/wireshark/src/packet-libvirt.c:423:34: error: null pointer dereference [-Werror=null-dereference]
423 | vir_xdr_dissector_t xd = find_payload_dissector(proc, type, get_program_data(prog, VIR_PROGRAM_DISSECTORS),
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
424 | *(gsize *)get_program_data(prog, VIR_PROGRAM_DISSECTORS_LEN));
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The current code to check XDR support was obsolete and way to
complicated.
On linux we can use pkg-config to check for libtirpc and have
the CFLAGS and LIBS configured by it as well.
On MinGW there is portablexdr library which installs header files
directly into system include directory.
On FreeBSD and macOS XDR functions are part of libc so there is
no library needed, we just need to call AM_CONDITIONAL to silence
configure which otherwise complains about missing WITH_XDR.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All of the listed functions are available in libselinux version 2.2.
Our supported OSes start with version 2.5 so there is no need to check
it.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Just like in the previous commit, the stdin_path argument of
virSecurityManagerSetAllLabel() is renamed to incomingPath.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The argument (if not NULL) points to the file the domain is
restoring from. On QEMU command line this used to be '-incoming
$path', but we've switched to passing FD ages ago and thus this
argument is used only in AppArmor (which loads the profile on
domain start). Anyway, the argument does not refer to stdin,
rename it to 'incomingPath' then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The only consumer was removed in the previous commit.
This reverts commit f03a38bd1d.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Currently, when restoring from a domain the path that the domain
restores from is labelled under qemuSecuritySetAllLabel() (and after
v6.3.0-rc1~108 even outside transactions). While this grants QEMU
the access, it has a flaw, because once the domain is restored, up
and running then qemuSecurityDomainRestorePathLabel() is called,
which is not real counterpart. In case of DAC driver the
SetAllLabel() does nothing with the restore path but
RestorePathLabel() does - it chown()-s the file back and since there
is no original label remembered, the file is chown()-ed to
root:root. While the apparent solution is to have DAC driver set the
label (and thus remember the original one) in SetAllLabel(), we can
do better.
Turns out, we are opening the file ourselves (because it may live on
a root squashed NFS) and then are just passing the FD to QEMU. But
this means, that we don't have to chown() the file at all, we need
to set SELinux labels and/or add the path to AppArmor profile.
And since we want to restore labels right after QEMU is done loading
the migration stream (we don't want to wait until
qemuSecurityRestoreAllLabel()), the best way to approach this is to
have separate APIs for labelling and restoring label on the restore
file.
I will investigate whether AppArmor can use the SavedStateLabel()
API instead of passing the restore path to SetAllLabel().
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1851016
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
These APIs are are basically
virSecuritySELinuxDomainSetPathLabelRO() and
virSecuritySELinuxDomainRestorePathLabel().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
These APIs don't use namespaces because the
virSecurityManagerSetSavedStateLabel() runs
when the namespace doesn't exist yet and thus
the virSecurityManagerRestoreSavedStateLabel()
has to run without namespace too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
These APIs were removed/renamed in v6.5.0-rc1~142 and v6.5.0-rc1~141
because they deemed unused. And if it wasn't for the RFE [1] things
would stay that way.
The RFE asks for us to not change DAC ownership on the file a domain is
restoring from. We have been doing that for ages (if not forever),
nevertheless it's annoying because if the restore file is on an NFS
remembering owner won't help - NFS doesn't support XATTRs yet. But more
importantly, there is no need for us to chown() the file because when
restoring the domain the file is opened and the FD is then passed to
QEMU. Therefore, we really need only to set SELinux and AppArmor.
This reverts bd22eec903.
This partially reverts 4ccbd207f2.
The difference to the original code is that secdrivers are now
not required to provide dummy implementation to avoid
virReportUnsupportedError(). The callback is run if it exists, if
it doesn't zero is returned without any error.
1: https://bugzilla.redhat.com/show_bug.cgi?id=1851016
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
When locking files for metadata change, we open() them for R/W
access. The write access is needed because we want to acquire
exclusive (write) lock (to mutually exclude with other daemons
trying to modify XATTRs on the same file). Anyway, the open()
might fail if the file lives on a RO filesystem. Well, if that's
the case, ignore the error and continue with the next file on the
list. We won't change any seclabel on the file anyway - there is
nothing to remember then.
Reported-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In the light of recent commit of 9d83281382 fix the comment that
says directories can't be locked. Well, in general they can, but
not in our case.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit <5b816e16968ba02def56f067774ecd9a8c8d44d7> removed hard-coded
sysconfdir path from *.conf files but missed virtproxyd.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit <f650e86703847af544762d02f79c70131ff7fbab> added check for
openpty function from util library using AC_CHECK_LIB(). However, that
macro doesn't define OPENPTY_LIBS, it only defines WITH_LIBUTIL and
prepends -lutil into LIBS for the whole project.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It was introduced by commit <c606671aaad10a9bc87f226bc473a091e00a9629>
as a gnulib ldexp module and later removed by commit
<09fe607b4de8eb883c966e90aaf5563299a22738>.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Fixes inconsistency with macro names for external programs.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit <0985a9597bb0348d46c0d18dc548a676bf0ad8e2> added unused variable
so remove it.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit <894556ca813ad3c4ebb01083b7971d73b4f53c8b> moved function
virSecretGetSecretString out of secret directory but forgot to update
CFLAGS in places where the include is no longer needed.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit <fd3b8fe7ad491c77c0b3f57110adaf64f743855e> removed objectlocking
test but forgot to remove all of the usages of LOCK_CHECKING_CFLAGS.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Function sanlock_write_lockspace() was introduced in 2.7 version which
is available in all supported OSes.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Function sanlock_killpath() was introduced in 2.4 version and had
modified one of the arguments from `char *` into `const char *` in
version 2.7. All of this is available in all supported OSes.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
SANLK_INQ_WAIT was introduced in sanlock 2.4 which is available in all
supported OSes.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This check was introduced by commit
<96a02703daad4dc6663165adbc0feade9900cebd> to guard calling
sanlock_inq_lockspace() function but it used SANLK_INQ_WAIT as a
parameter which was introduced later. This was eventually fixed by
commit <238dba0f9c925359cb3b8beddd8c8ae739cb4e06>.
We can safely replace check for sanlock_inq_lockspace as that function
was introduced in sanlock-1.9. The oldest used version, sanlock-2.2,
is by Ubuntu 16.04.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This was introduced together with clock-time gnulib module by commit
<d74e5a4dfc434d3a1d01856d013a7f50d910fa95> and removed from libvirt
by commit <86d223a762990c9d529065a2d3b30b6a00ea63dd>.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Set FLAT_NAMESPACE_FLAGS to -Wl,-flat_namespace in configure only for
macOS and use it unconditionally in Makefiles.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There is no need to have DRIVER_MODULES_LIBS as it's used only for
libvirt.so. The other places are using DLOPEN_LIBS directly and dlopen
is required if building with libvirtd.
It's mandatory since <5aec02dc37623bf739d1edd8f2be3e4ad9f94ff5>.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virFileIsAccessible does not return true on accessible
directories. Check whether it set EISDIR and only
then assume the directory is inaccessible.
Return 0 (not found) instead of 1 (found),
since the bridge driver taints the network based on
this return value, not whether the hook actually ran.
Remove the bogus check from virHookCall, since it already
checks the virHooksFound bitmap that was filled before
by virHookCheck.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Fixes: 7fa7f7eeb6
Closes: https://gitlab.com/libvirt/libvirt/-/issues/47
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
- Add a check for asm/hwcap.h header presence,
- Add a check for getauxval() function that is used
on Linux, and for elf_aux_info() which is a FreeBSD
equivalent.
This is based on a patch submitted by Mikael Urankar in
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=247722.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When preparing for the removal of GNULIB commit 18dca21a32 removed the
unneeded O_DIRECTORY, but unfortunately started opening the directory for
writing which fails every time for a directory. There is also no need for that
as flock() works on O_RDONLY file descriptor as well, even for LOCK_EX.
https://bugzilla.redhat.com/1852741
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
All modified functions are similar, in all cases "cleanup" label is removed,
along with all the "goto" calls.
Signed-off-by: Nicolas Brignone <nmbrignone@gmail.com>
Reviewed-by: Laine Stump <laine@redhat.com>
libxlMakeNic was calling g_strdup(virBufferCurrentContent(&buf)) to
make a copy of the buffer contents, and then later freeing the buffer
without ever using it again. Instead of this extra strdup, just
transfer ownership of the virBuffer's string with
virBufferContentAndReset(), and be done with it.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are several calls to virBufferFreeAndReset() when functions
encounter an error, but the caller never uses the virBuffer once an
error has been encountered (all callers detect error by looking at the
function return value, not the contents of the virBuffer being
operated on), and now that all virBuffers are auto-freed there is no
reason for the lower level functions like these to spend time freeing
a buffer that is guaranteed to be freed momentarily anyway.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Every other caller of this function checks for an error return and
ends their formatting early if there is an error. This function
happily continues on its way.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The latter function is guaranteed to always clear out the virBuffer
anyway, so this is redundant and could add to extra cargo-cult code if
used as an example.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In most cases this eliminates one or more calls to
virBufferClearAndReset(), but even when it doesn't it's better because:
1) it makes the code more consistent, making it more likely that new
contributors who are "learning by example" will to the right thing.
2) it protects against future modifications that might have otherwise
needed to add a virBufferClearAndReset()
3) Currently some functions don't call virBufferClearAndReset() only
because they're relying on some subordinate function to call it for
them (e.g. bhyveConnectGetSysinfo() in this patch relies on
virSysinfoFormat() to clear out the buffer when there is an
error). I think this is sloppy behavior, and that the toplevel
function that defines and initializes the buffer should be the
function clearing it at the end.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The output of vcpupin and emulatorpin for a domain with vcpu
placement='static' is based on a default bitmap that contains
all possible CPUs in the host, regardless of the CPUs being offline
or not. E.g. for a Linux host with this CPU setup (from lscpu):
On-line CPU(s) list: 0,8,16,24,32,40,(...),184
Off-line CPU(s) list: 1-7,9-15,17-23,25-31,(...),185-191
And a domain with this configuration:
<vcpu placement='static'>1</vcpu>
'virsh vcpupin' will return the following:
$ sudo ./run tools/virsh vcpupin vcpupin_test
VCPU CPU Affinity
----------------------
0 0-191
This is benign by its own, but can make the user believe that all
CPUs from the 0-191 range are eligible for pinning. Which can lead
to situations like this:
$ sudo ./run tools/virsh vcpupin vcpupin_test 0 1
error: Invalid value '1' for 'cpuset.cpus': Invalid argument
This is exarcebated by the fact that 'virsh vcpuinfo' considers only
available host CPUs in the 'CPU Affinity' field:
$ sudo ./run tools/virsh vcpuinfo vcpupin_test
(...)
CPU Affinity: y-------y-------y-------(...)
This patch changes the default bitmap of vcpupin and emulatorpin, in
the case of domains with static vcpu placement, to all available CPUs
instead of all possible CPUs. Aside from making it consistent with
the behavior of 'vcpuinfo', users will now have one less incentive to
try to pin a vcpu in an offline CPU.
https://bugzilla.redhat.com/show_bug.cgi?id=1434276
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The idea is to have a function that calls virHostCPUGetOnlineBitmap()
but, instead of returning NULL if the host does not have CPU
offlining capabilities, fall back to a bitmap containing all
present CPUs.
Next patch will use this helper in two other places.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This function reads the string in sysfspath/cpu/present and
parses it manually to retrieve the number of present CPUs.
virHostCPUGetPresentBitmap() reads and parses the same file,
using a more robust parser via virBitmapParseUnlimited(),
but returns a bitmap. Let's drop all the manual parsing done
here and simply return the size of the resulting bitmap
from virHostCPUGetPresentBitmap().
Given that no more parsing is being done manually in the function,
rename it to virHostCPUCountLinux().
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since the ESX virtual hardware version 4.0, virtual machines support up
to 10 virtual NICs instead of 4 previously. This changes the limit
accordingly based on the provided `virtualHW.version`.
Signed-off-by: Bastien Orivel <bastien.orivel@diateam.net>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If the name is 'vcpus', we will get 'vcpussched' instead of 'vcpusched'
in the error message as following:
... 19155 : vcpussched attributes 'vcpus' must not overlap
So we use 'vcpu' to replace 'vcpus'.
Signed-off-by: Liao Pingfang <liao.pingfang@zte.com.cn>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
A few commits ago, in aeecbc87b7, I've implemented command line
generation for ACPI HMAT. For this, we need to know if at least
one guest NUMA node has vCPUs. This is tracked in
@masterInitiator variable, which is initialized to -1, then we
iterate through guest NUMA nodes and break the loop if we find a
node with a vCPU. After the loop, if masterInitiator is still
negative then no NUMA node has a vCPU and we error out. But this
exact check was missing comparison for negativeness.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This capability tracks whether QEMU is capable of defining HMAT
ACPI table for the guest.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
These APIs will be used by QEMU driver when building the command
line.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
There are several restrictions, for instance @initiator and
@target have to refer to existing NUMA nodes (daa), @cache has to
refer to a defined cache level and so on.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
To cite ACPI specification:
Heterogeneous Memory Attribute Table describes the memory
attributes, such as memory side cache attributes and bandwidth
and latency details, related to the System Physical Address
(SPA) Memory Ranges. The software is expected to use this
information as hint for optimization.
According to our upstream discussion [1] this is exposed under
<numa/> as <cache/> under NUMA <cell/> and <latency> or
<bandwidth/> under numa/latencies.
1: https://www.redhat.com/archives/libvir-list/2020-January/msg00422.html
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
QEMU allows creating NUMA nodes that have memory only.
These are somehow important for HMAT.
With check done in qemuValidateDomainDef() for QEMU 2.7 or newer
(checked via QEMU_CAPS_NUMA), we can be sure that the vCPUs are
fully assigned to NUMA nodes in domain XML.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
There is only one caller of virDomainNumaSetNodeCpumask() which
checks for the return value but because the function will return
NULL iff the @cpumask was NULL in the first place. But in that
place @cpumask can't be NULL because it was just allocated by
virBitmapParse().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The machine can not be NULL at this point -
qemuDomainDefPostParse() makes sure it isn't.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The function doesn't just build the argument for -numa. Since the
-numa can be repeated multiple times, it also puts -numa onto the
cmd line. Also, the rest of the functions has 'Command' infix.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
There are two functions virDomainNumaDefCPUFormatXML() and
virDomainNumaDefCPUParseXML() which format and parse domain's
<numa/>. There is nothing CPU specific about them. Drop the
infix.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
There is nothing domain specific about the function, thus it
should not have virDomain prefix. Also, the fact that it is a
static function makes it impossible to use from other files.
Move the function to virxml.c and drop the 'Domain' infix.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Commit 82576d8f35 used a string "on" to enable the 'pmem' property.
This is okay for the command line visitor, but the property is declared
as boolean in qemu and thus it will not work when using QMP.
Modify the type to boolean. This changes the command line, but
fortunately the command line visitor in qemu parses both 'yes' and 'on'
as true for the property.
https://bugzilla.redhat.com/show_bug.cgi?id=1854684
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Previous commit removed the last usage of the function. Drop
virQEMUCapsCompareArch as well since virQEMUCapsCacheLookupByArch was
its only caller.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Firstly, SEV is present only on AMD, so we can safely assume x86.
Secondly, the problem with looking up capabilities in the cache by arch
is that it's using virHashSearch with a callback to find the right
capabilities and get the binary name from it as well, but since the
cache is empty, it will return NULL and we won't get the corresponding
binary name out of the lookup either. Then, during the cache validation
we try to create a new cache entry for the emulator, but since we don't
have the binary name, nothing gets created.
Therefore, virQEMUCapsCacheLookupDefault is used to fix this issue,
because it doesn't rely on the capabilities cache to construct the
emulator binary name.
https://bugzilla.redhat.com/show_bug.cgi?id=1852311
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The semantics of the backup operation don't strictly require that all
disks being backed up are part of the same incremental part (when a disk
was checkpointed/backed up separately or in a different VM), or even
they may not have a previous checkpoint at all (e.g. when the disk
was freshly hotplugged to the vm).
In such cases we can still create a common checkpoint for all of them
and backup differences according to configuration.
This patch adds a per-disk configuration of the checkpoint to do the
incremental backup from via the 'incremental' attribute and allows
perform full backups via the 'backupmode' attribute.
Note that no changes to the qemu driver are necessary to take advantage
of this as we already obey the per-disk 'incremental' field.
https://bugzilla.redhat.com/show_bug.cgi?id=1829829
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Use the configured TLS env to setup encryption of the TLS transport.
https://bugzilla.redhat.com/show_bug.cgi?id=1822631
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Allow enabling TLS for the NBD server used to do pull-mode backups. Note
that documentation already mentions 'tls', so this just implements the
schema and XML bits.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
TLS is required to transport backed-up data securely when using
pull-mode backups.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Add fields for storing the aliases necessary to clean up the TLS env for
a backup job after it finishes.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Data is valid only when queried as guest writes may increase the backup
size.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Introduce code which merges the appropriate bitmaps and queries the
final size of the backup, so that we can print the XML with size
information.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Avoid printing '0' size in case when we weren't able to determine the
backup size by adding a flag whether the size is valid and interlock
printing of the field according to the flag.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Merge the bitmaps when finalizing a block pull job so that backups work
properly afterwards.
https://bugzilla.redhat.com/show_bug.cgi?id=1799010
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Users may want to use this to create a full backup or even incremental
if the checkpoints are pre-existing. We still will not allow to create a
checkpoint on a read-only disk as that makes no sense.
https://bugzilla.redhat.com/show_bug.cgi?id=1840053
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Setup the TLS secret when preparing a virStorageSource for use.
https://bugzilla.redhat.com/show_bug.cgi?id=1602328
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Until now libvirt didn't allow using encrypted TLS key for disk clients.
Add fields for configuring the secret and propagate defaults.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Add infrastructure for hot- and cold-plug of the secret object holding
decryption key for the TLS key.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Store the required data in the private data of a storage source and
ensure that the 'alias' of the secret is formatted in the status XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The '*_tls_x509_verify' options are relevant only when we are going to
expose a server socket as client sockets always enable verification.
Split up the macro to separate the common bits from the server bits so
that when we'll later extend support of 'nbd' and 'vxhs' disks which are
client only we can reuse the existing macros.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Move the extraction of the config value so that it makes more sense
after upcoming refactors.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
There's no such parameter. Reword the sentence to account for enabling
TLS-encrypted migration using API flags.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Add a helper which will always return the storage source private data
even if it was not allocated before.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The strings allocated in virGetHostnameImpl() are all allocated via
g_strdup(), which will exit on OOM anyway, so the call to
virReportOOMError() is redundant, and removing it allows slight
modification to the code, in particular the cleanup label can be
eliminated.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The error: label in this function just does "return -1", so replace
all the "goto error" in the function with "return -1".
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
hostsfilestr was not being freed. This will be turned into g_autofree
in an upcoming patch converting a lot more of the same file to using
g_auto*, but I wanted to make a separate patch for this first so the
other patch is simpler to review (and to make backporting easier).
The leak was introduced in commit 97a0aa2467
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
AUTOPTR_CLEANUP_FUNC is set to xmlBufferFree() in util/virxml.h (This
is actually new - added accidentally (but fortunately harmlessly!) in
commit 257aba2daf. I had added it along with the hunks in this patch,
then decided to remove it and submit separately, but missed taking out
the hunk in virxml.h)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Although libvirt itself uses g_malloc0() and friends, which exit when
there isn't enouogh memory, libxml2 uses standard malloc(), which just
returns NULL on OOM - this means we must check for NULL on return from
any libxml2 functions that allocate memory.
xmlBufferCreate(), for example, might return NULL, and we don't always
check for it. This patch adds checks where it isn't already done.
(NB: Although libxml2 has a provision for changing behavior on OOM (by
calling xmlMemSetup() to change what functions are used to
allocating/freeing memory), we can't use that, since parts of libvirt
code end up in libvirt.so, which is linked and called directly by
applications that may themselves use libxml2 (and may have already set
their own alternate malloc()), e.g. drivers like esx which live totally
in the library rather than a separate process.)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When introducing vcpu.<num>.wait (v1.3.2-rc1~301) and
vcpu.<num>.halted (v2.4.0-rc1~36) the documentation was
not written.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Since feb83c1e71 libvirtd will abort on
startup if run as non-root
2020-07-01 16:30:30.738+0000: 1647444: error : virDirOpenInternal:2869 : cannot open directory '/etc/libvirt/hooks/daemon.d': Permission denied
The root cause flaw is that non-root libvirtd is using /etc/libvirt for
its hooks. Traditionally that has been harmless though since we checked
whether we could access the hook file and degraded gracefully. We need
the same access check for iterating over the hook directory.
Long term we should make it possible to have an unprivileged hook dir
under $HOME.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In 076591009a a validation code was added to
virDomainDeviceInfoFormat() which reports an error if zPCI
address entered in was incomplete. But, there are two problems
with this approach.
The first problem is the placement of the code - it doesn't
belong into XML formatter rather than XML validator.
The second one is that at the point of formatting XML the post
parse callback has run and thus filled in required info.
Therefore this check can never do something useful and instead of
moving it into validator, it's removed completely.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
To make the code future proof, the rest of the
qemuValidateDomainDeviceDefAddress() has to be executed (even
though there is nothing there yet) instead of returning directly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Commit 076591009a ("conf: fix zPCI address auto-generation on
s390") is doing a check for virZPCIDeviceAddressIsIncomplete()
prior to checking if the device has a ZPCI address at all. This
results in errors like these when starting libvirt:
error : virDomainDeviceInfoFormat:7527 : internal error:
Missing uid or fid attribute of zPCI address
Fix it by moving virZPCIDeviceAddressIsIncomplete() after the
check done by virZPCIDeviceAddressIsPresent().
Fixes: 076591009a
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The ZPCI device validation is specific to qemu. So, let us move the
ZPCI uid validation out of domain xml parsing into qemu domain device
validation.
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Let us fix the issues with zPCI address validation and auto-generation
on s390.
Currently, there are two issues with handling the ZPCI address
extension. Firstly, when the uid is to be auto-generated with a
specified fid, .i.e.:
...
<address type='pci'>
<zpci fid='0x0000001f'/>
</address>
...
we expect uid='0x0001' (or the next available uid for the domain).
However, we get a parsing error:
$ virsh define zpci.xml
error: XML error: Invalid PCI address uid='0x0000', must be > 0x0000
and <= 0xffff
Secondly, when the uid is specified explicitly with the invalid
numerical value '0x0000', we actually expect the parsing error above.
However, the domain is being defined and the uid value is silently
changed to a valid value.
The first issue is a bug and the second one is undesired behaviour, and
both issues are related to how we (in-band) signal invalid values for
uid and fid. So let's fix the XML parsing to do validation based on what
is actually specified in the XML.
The first issue is also related to the current code behaviour, which
is, if either uid or fid is specified by the user, it is incorrectly
assumed that both uid and fid are specified. This bug is fixed by
identifying when the user specified ZPCI address is incomplete and
auto-generating the missing ZPCI address.
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Refer to the notion of mount propagation instead which describes
the actual behaviour more clearly.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The two sides of a PTY can be referred to as primary and secondary
TTYs.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When querying QEMU we have to iterate over two nested sets
of CPUs. The terms "main vcpu" and "sub vcpu" are a good
representation.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The two sides of a PTY can be referred to as primary and secondary
TTYs.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The term "ignored" is a better choice for the filtering performed
on devices from udev.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This new naming matches the terminology used in the error
messages that the callers report.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When listing CPU models, we need to filter the data based on sets
of permitted and forbidden CPU models.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The term "access control list" better describes the concept involved.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The term "access control list" better describes the concept involved.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Although a ramfb video device is not a PCI device, we don't currently
report an error for ramfb device definitions containing a PCI address.
However, a guest configured with such a device will fail to start:
# virsh start test1
error: Failed to start domain test1
error: internal error: qemu unexpectedly closed the monitor: 2020-06-16T05:23:02.759221Z qemu-kvm: -device ramfb,id=video0,bus=pcie.0,addr=0x1: Device 'ramfb' can't go on PCIE bus
A better approach is to reject any device definitions that contain PCI
addresses. While this is a change in behavior, any existing
configurations were non-functional.
https://bugzilla.redhat.com/show_bug.cgi?id=1847259
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
A few commits back (in v6.4.0-131-gbdb8f2e418) the post parse
function for domain interface was changed so that it doesn't fill
in model for hostdev types of interfaces (including network type
interfaces which would end up hostdevs).
While the idea is sound, the execution can be a bit better:
virDomainNetResolveActualType() which is used to determine
runtime type of given interface is heavy gun - it connects to
network driver, fetches network XML, parses it. This all is
followed by check whether the interface doesn't already have
model set (from domain XML).
If we switch the order of these two checks then the short circuit
evaluation will ensure the expensive check is done only if really
needed.
This commit in fact fixes qemuxml2xmltest which due to lacking
fake network driver tries to connect to network:///session and
start the virtnetworkd. Fortunately, because of
v6.3.0-25-gf28fbb05d3 it fails to do so and
virDomainNetResolveActualType() returns -1. The only reason we
don't see the test failing is because our input XMLs have model
and thus we are saved by the latter (now former) check.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Until recently, an <interface type='network'> would automatically be
assigned model "rtl8139", which in turn would lead to the device being
assigned a PCI address on a conventional PCI controller (i.e. a
pcie-to-pci-bridge). If the network was a typical Linux host
bridge-based network that used an emulated device, this would be
appropriate, since the guest actually would get an emulated rtl8139
NIC, and that device is a conventional PCI device.
However, if the network being used was a pool of hostdev devices, the
guest would get an actual PCIe network device assigned from the host
via VFIO; while the interface model in that case is irrelevant for the
QEMU commandline to assign the device, the PCI address would have
already been assigned prior to runtime, so the address assignment
would be done based on the model='rtl8139' - a conventional PCI
device. VFIO assignment of a PCIe device to a conventional PCI slot
works, but we would rather have these devices in a PCIe slot.
Since commit bdb8f2e418, if <interface type='network'> points to a
etwork that is a pool of hostdev devices, the interface model will be
_unset_ by default. This patch uses that information when deciding
what type of slot to assign to the device: since all hostdev network
interfaces are SR-IOV VFs, and *all* SR-IOV network cards are PCIe, it
is safe to assume that the VFs are PCIe and we should assign then to a
PCIe slot in the guest.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
All the domain job related APIs were present in `qemu_domain.c`
along with the other domain APIs. In this patch, we move all the
qemu domain job APIs into a separate file.
Also, in this process, `qemuDomainTrackJob()`,
`qemuDomainFreeJob()`, `qemuDomainInitJob()` and
`qemuDomainObjSaveStatus()` were converted to a non-static
funciton and exposed using `qemu_domain.h`.
Signed-off-by: Prathamesh Chavan <pc44800@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In functions `qemuDomainObjInitJob`, `qemuDomainObjResetJob`,
`qemuDomainObjResetAgentJob`, `qemuDomainObjResetAsyncJob`,
`qemuDomainObjFreeJob`, `qemuDomainJobAllowed`,
`qemuDomainNestedJobAllowed` we avoid sending the complete
qemuDomainObjPrivatePtr as parameter and instead just send
qemuDomainJobObjPtr.
This is done in a effort to separating the qemu-job APIs into
a spearate file.
Signed-off-by: Prathamesh Chavan <pc44800@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
