btrfs defaults to performing copy-on-write for files. This is often
undesirable for VM images, so we need to be able to control whether this
behaviour is used.
The virFileSetCOW() will allow for this. We use a tristate, since out of
the box, we want the default behaviour attempt to disable cow, but only
on btrfs, silently do nothing on non-btrfs. If someone explicitly asks
to disable/enable cow, then we want to raise a hard error on non-btrfs.
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is only used in the ESX driver where, when set to "no", it will
ignore all the checks libvirt does about the origin of the MAC address
(whether or not it's in a VMWare OUI) and forward the original one to
the ESX server telling it not to check it either.
This allows keeping a deterministic MAC address which can be useful for
licensed software which might dislike changes.
Signed-off-by: Bastien Orivel <bastien.orivel@diateam.net>
VMX conversion parts rewritten to apply on top of previously merged
support for type='generated|static'
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When support for MAC addresses having a type='static|generated'
attribute was added in:
commit 454e5961ab
Author: Bastien Orivel <bastien.orivel@diateam.net>
Date: Mon Jul 13 16:28:53 2020 +0200
Add a type attribute on the mac address element
the VMX -> XML parser was not updated. As a result while we
accept the 'type' attribute on input, we never show it again
on 'output', so we loose information during the roundtrip.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
With the current formatter, the XML snippets:
<interface type='bridge'>
<mac address='00:0c:29:dd:ee:fe' type='static'/>
<source bridge='br1'/>
</interface>
<interface type='bridge'>
<mac address='aa:bb:cc:dd:ee:fd' type='generated'/>
<source bridge='br2'/>
</interface>
result in
ethernet1.present = "true"
ethernet1.networkName = "br1"
ethernet1.connectionType = "bridged"
ethernet1.addressType = "static"
ethernet1.address = "00:0c:29:dd:ee:fe"
ethernet1.checkMACAddress = "false"
ethernet2.present = "true"
ethernet2.networkName = "br2"
ethernet2.connectionType = "bridged"
ethernet2.addressType = "static"
ethernet2.address = "aa:bb:cc:dd:ee:fd"
ethernet2.checkMACAddress = "false"
which is flawed, as both type='static' and type='generated' in the XML
turn into 'static' in the VMX config.
The existence of the 'static' attribute is further overriding whether
the checkMACAddress config option is set as a side effect.
Both these pieces of flawed logic were introduced in
commit 454e5961ab
Author: Bastien Orivel <bastien.orivel@diateam.net>
Date: Mon Jul 13 16:28:53 2020 +0200
Add a type attribute on the mac address element
which intentionally added the 'checkMACAddress' side effect based on
the 'type' attribute.
With this change, we're reverting the handling of checkMACAddress
to match what existed historically. The 'type' attribute now directly
maps to the addressType attribute, so the above config becomes:
ethernet1.present = "true"
ethernet1.networkName = "br1"
ethernet1.connectionType = "bridged"
ethernet1.addressType = "static"
ethernet1.address = "00:0c:29:dd:ee:fe"
ethernet2.present = "true"
ethernet2.networkName = "br2"
ethernet2.connectionType = "bridged"
ethernet2.addressType = "generated"
ethernet2.generatedAddress = "aa:bb:cc:dd:ee:fd"
ethernet2.generatedAddressOffset = "0"
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
gcc 10.1.0 on Debian sid has a bug where the bounds checking gets
confused beteen two branches:
In file included from /usr/include/string.h:495,
from ../../src/internal.h:28,
from ../../src/util/virsocket.h:21,
from ../../src/util/virsocketaddr.h:21,
from ../../src/util/virnetdevip.h:21,
from ../../src/util/virnetdevip.c:21:
In function 'memcpy',
inlined from 'virNetDevGetifaddrsAddress' at ../../src/util/virnetdevip.c:914:13,
inlined from 'virNetDevIPAddrGet' at ../../src/util/virnetdevip.c:962:16:
/usr/include/arm-linux-gnueabihf/bits/string_fortified.h:34:10: error: '__builtin_memcpy' offset [16, 27] from the object at 'addr' is out of the bounds of referenced subobject 'inet4' with type 'struct sockaddr_in' at offset 0 [-Werror=array-bounds]
34 | return __builtin___memcpy_chk (__dest, __src, __len, __bos0 (__dest));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from ../../src/util/virnetdevip.h:21,
from ../../src/util/virnetdevip.c:21:
../../src/util/virnetdevip.c: In function 'virNetDevIPAddrGet':
../../src/util/virsocketaddr.h:29:28: note: subobject 'inet4' declared here
29 | struct sockaddr_in inet4;
| ^~~~~
cc1: all warnings being treated as errors
Note the source location is pointing to the "inet6" / AF_INET6 branch of
the "if", but is complaining about bounds of the "inet4" field. Changing
the code into a switch() is sufficient to avoid triggering the bug and
is arguably better code too.
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
There are races condiction to make '/run/libvirt/qemu/dbus' directory in
virDirCreateNoFork() while concurrent start VMs, and get "failed to create
directory '/run/libvirt/qemu/dbus': File exists" error message. pre-create the
dbus directory in qemuStateInitialize.
Signed-off-by: Bihong Yu <yubihong@huawei.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Remove the superfuous break, as there is a 'return' before it.
Signed-off-by: Liao Pingfang <liao.pingfang@zte.com.cn>
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Remove superfluous breaks, as there is a "return" before them.
Signed-off-by: Liao Pingfang <liao.pingfang@zte.com.cn>
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Remove superfluous breaks, as there is a "return" before them.
Signed-off-by: Liao Pingfang <liao.pingfang@zte.com.cn>
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Since active domains which do not have the attribute already set were
not started by libvirt that probed for CPU migratable property, we need
to check this property on reconnect and update the domain definition
accordingly.
https://bugzilla.redhat.com/show_bug.cgi?id=1857967
Reported-by: Mark Mielke <mark.mielke@gmail.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Commit v6.4.0-61-g201bd5db63 started to fill the default value for
//cpu/@migratable attribute according to QEMU support. However, active
domains either have the migratable attribute already set or the
capabilities we use for checking the QEMU support were created by older
libvirt which didn't probe for this specific capability. Thus we should
leave active domains alone when parsing their XMLs.
https://bugzilla.redhat.com/show_bug.cgi?id=1857967
Reported-by: Mark Mielke <mark.mielke@gmail.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Use g_auto* on pointers to avoid using the 'cleanup' label.
In theory the 'ret' variable can also be discarded if the flow
of the logic is reworked. Perhaps another time.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20200717211556.1024748-5-danielhb413@gmail.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Use g_autoptr() on pointers and remove the unneeded 'cleanup' label.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20200717211556.1024748-4-danielhb413@gmail.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Use g_autoptr() and remove the 'cleanup' label.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20200717211556.1024748-3-danielhb413@gmail.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Next patches will use g_autoptr() in qemuProcessQMPPtr pointers
for some cleanups in QMP code.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20200717211556.1024748-2-danielhb413@gmail.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Refactor networkSetIPv6Sysctls to remove repetition and reuse
of the 'field' variable.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Ignore errors from creating "libvirt-tmp-activewrite" bitmap. This
prevents failures of finishing blockjobs if the bitmap already exists.
Note that if the bitmap exists, the worst case that can happen is that
more bits are marked as dirty in the resulting merge.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
There are two possible 'transaction' command arguments in the function.
Rename 'actions' as they deal with creating bitmaps only.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The 'libvirt-tmp-activewrite' bitmap is added during the 'pivot'
operation of block copy and active layer block commit operations
regardless of whether there are any bitmaps to merge, but was not
removed unless a bitmap was merged. This meant that subsequent attempts
to merge into the same image would fail.
Fix it by checking whether the 'libvirt-tmp-activewrite' would be used
by the code and don't skip the code which would delete it.
This is a regression introduced when we switched to the new code for
block commit in <20a7abc2d2d> and for block copy in <7bfff40fdfe5>. The
actual bug originates from <4fa8654ece>.
https://bugzilla.redhat.com/show_bug.cgi?id=1857735
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Commit 20a7abc2d2 tried to delete the possibly leftover bitmap but
neglected to call the actual monitor to do so.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The handler finalizing the active layer block commit doesn't actually
reopen the file for active layer block commit, so the comment and check
are invalid.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The infrastructure supports setting the threshold also for the <mirror>.
Mention it in the docs.
https://bugzilla.redhat.com/show_bug.cgi?id=1807741
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
When doing a block copy, there is another chain of images attached to a
disk. Consider them as well when looking up a disk using nodename.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Top level image may get two events, one with the disk target (vda) and
one with disk target with index (vda[3]) if the top level image has an
index.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The index returned by qemuDomainDiskLookupByNodename is the position in
the backing chain rather than the index we report in the XML.
Since with -blockdev they differ now and additionally the disk source
also has an index we need to fix the 'threshold' events we report:
1) If it's the top level image we must always trigger the event without
any suffix as we did until now
2) We must report the correct index
3) We must report the correct index also for the top level image, when
blockdev is used.
This means that we need to potentially emit 2 events, one for the device
without the index and then when blockdev is used and the top level image
has an index we must do it also with the index.
This will fix it for blockdev cases, while also not removing previous
semantics.
https://bugzilla.redhat.com/show_bug.cgi?id=1857204
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Rather than having labels named exit, done, exit_snooprequnlock,
skip_rename, etc, use the standard "cleanup" label. And instead of
err_exit, malformed, tear_down_tmpebchains, use "error".
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This rewrite of a nested conditional produces the same results, but
eliminate a goto and corresponding label.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It's possible/probable the callers to virNWFilterInstReset() make it
unnecessary to set the object's nrules to 0 after freeing all its
rules, but that same function is setting nfilters to 0, so let's do
the same for the sake of consistency.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
On failure, this function would clear out and free the list of
subchains it had been called with. This is unnecessary, because the
*only* caller of this function will also clear out and free the list
of subchains if it gets a failure from ebtablesGetSubChainInsts().
(It also makes more logical sense for the function that is creating
the entire list to be the one freeing the entire list, rather than
having a function whose purpose is only to create *one item* on the
list freeing the entire list).
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko redhat com>
All these cleanup/error labels were reduced to having just "return
ret" by a previous patch, so get rid of them and return directly.
This patch coincidentally fixes a bug in
networkFindUnusedBridgeName(), where we would log an error yet still
return success if we failed to find a single unused "virbrNNN" name
after checking all values of "N" from 0 - 256. Said bug was introduced
when that function was originally written, in commit a28d3e485f
(libvirt 1.2.15, 2015)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This includes standard g_autofree() as well as other objects that have
a cleanup function defined to use via g_autoptr (virCommand,
virJSONValue)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virNetworkDHCPLease and virNetworkDHCPLeaseFree() are declared in the
public API file libvirt-network.h, and we can't pollute that with glib
macro invocations, so put this in src/datatypes.h next to the other
virNetwork items.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
g_new() is used in only 3 places. Switching them to g_new0() will do
no harm, reduces confusion, and helps me sleep better at night knowing
that all allocated memory is initialized to 0 :-) (Yes, I *know* that
in all three cases the associated memory is immediately assigned some
other value. Today.)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
To remove dependecy of `qemuDomainJob` on job specific
paramters, a `privateData` pointer is introduced.
To handle it, structure of callback functions is
also introduced.
Signed-off-by: Prathamesh Chavan <pc44800@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In 9536379da4 and 8b0cb0e666 I've tried to call
virNetSocketCheckProtocolByLookup() only if we are suspecting the
host is IPv4 or IPv6 capable (because we've found an interface
with such address). However, the code was missing dereference of
the boolean variables and thus was comparing pointers against
NULL.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This partially reverts commit 5331c4804f.
The original commit mistakenly thought virFileCacheLookup did not set
an error. In fact the only case it doesn't set an error for is when
the cache key is NULL. This in fact the fault of the caller for passing
an invalid cache key, so doesn't need to be handled.
This caller bug was fixed by checking for a NULL binary in the
virQEMUCapsCacheLookupDefault method.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Conver the code to the new approach which uses XPath to fetch known
elements rather than looping through all XML children.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use a switch statement which will not be omitted when adding potential
new types.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similarly to previous commit split out formatting of the mdev subsystem
related stuff.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similarly to previous commit split out formatting of the vHBA subsystem
related stuff.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Split up formatting of the '<address>' element rather that trying to
optimize it with formatting string hacks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similarly to previous commit split out formatting of the SCSI subsystem
related stuff.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similarly to previous commit split out formatting of the PCI subsystem
related stuff.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Separate out bits related to USB so that the logic isn't entangled in
multiple conditional statements.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Refactor the formatter to the new multiple buffer based approach so that
we can easily separate it into formatters per subsys type.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similarly to previous commits, modify the hostdev detach code to use
blockdev infrastructure to detach (i)SCSI hostdevs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similarly to command line creation, use the blockdev helpers when
hotplugging an (i)SCSI hostdev.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In preparation for instantiating (i)SCSI hostdevs via -blockdev,
refactor qemuBuildHostdevSCSICommandLine to use the new infrastructure
which will do it automatically.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add convertor for creating qemuBlockStorageSourceAttachData which will
allow reusing the infrastructure which we have for attaching disks also
for hostdevs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We want to instantiate hostdevs via -blockdev too. Add a separate
capability for them for a clean transition. The new capability will be
enabled when QEMU_CAPS_BLOCKDEV is present once all code is prepared.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Don't (re)generate the backend alias (alias of the -drive backend for
now) internally but rather pass it in. Later on it will be replaced by
the nodename when blockdev is used depending on the capabilities.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move all (i)SCSI related code into a new function named
'qemuBuildHostdevSCSICommandLine'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We now store the alias of the secrets in the status XML so there's no
need to generate it again.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When upgrading from a libvirt which didn't format private data of a
virStorageSource representing an iSCSI hostdev source, we might need to
generate some internal data so that the code still works as if it was
present in the status XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We need the alias to deal with hot-unplug of the hostdev. Use
qemuDomainSecretInfoDestroy which clears only the secrets and not the
alias. The same function is used also for handling disk secrets.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We store the config of an iSCSI hostdev in a virStorageSource structure.
Parse the private data portion.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
iSCSI subsystem hostdevs store the data as a virStorageSource. Format
the private data part of the virStorageSource in the appropriate place.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
SCSI hostdevs don't have a virStorageSource associated with the backend
in certain cases. Adding a separate field to hold memory for a copy of
the nodename of the storage backend will allow reusing the blockdev
machinery also for SCSI hostdevs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It doesn't make sense to format "discard" when doing a -blockdev backend
of scsi-generic used with SCSI hostdevs. Add a way to skip it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming commit will need to add another flag for the function so
convert it to a bitwise-or'd array of flags to prevent having 4
booleans.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Historically, if we found an interface with an IPv6 address we
did not blindly trust that host is IPv6 capable (as in we can
successfully translate IPv4 addresses) but used getaddrinfo() to
confirm it. Turns out, we have use the same argument for IPv4.
For instance, in an namespace created by the following steps,
getaddrinfo("127.0.0.1", ...) fails (demonstrating by "Socket
TCP/IPv4 Accept" test case failing in virnetsockettest):
unshare -n
ip link set lo up
ip link add dummy0 type dummy
ip link set dummy0 up
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There is not much sense trying to disprove host is IPv6 capable
if we know after first round (getifaddrs()) that is is not.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The virNetSocketCheckProtocols() function is supposed to tell
caller whether IPv4 and/or IPv6 is supported on the system. In
the initial round, it uses getifaddrs() to see if an interface
has IPv4/IPv6 address assigned and then to double check IPv6 it
uses getaddrinfo() to lookup IPv6 loopback address. Separate out
this latter code because it is going to be reused.
Since the original code lived under an #ifdef and the new
function doesn't it is marked as unused - because on some systems
it may be so.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Historically, we've used security_context_t for variables passed
to libselinux APIs. But almost 7 years ago, libselinux developers
admitted in their API that in fact, it's just a 'char *' type
[1]. Ever since then the APIs accept 'char *' instead, but they
kept the old alias just for API stability. Well, not anymore [2].
1: 9eb9c93275
2: 7a124ca275
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Choose a TPM 2 device for the backend as default for the CRB interface
since TPM 1.2 would not work.
This patch addresses BZ 1781913: https://bugzilla.redhat.com/show_bug.cgi?id=1781913
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
The firmware (SLOF) on QEMU for ppc64 does not support TPM 1.2, so
prevent the choice of TPM 1.2 when the SPAPR device model is chosen
and use a default of '2.0' (TPM 2) for the backend.
This patch addresses BZ 1781913: https://bugzilla.redhat.com/show_bug.cgi?id=1781913
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Move setting the TPM default version out of the validation function into
the post parse function.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Functions `qemuDomainObjPrivateXMLParseJob` and
`qemuDomainObjPrivateXMLFormatJob` are moved from
`qemu_domain` to `qemu_domainjob`.
Signed-off-by: Prathamesh Chavan <pc44800@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
`qemuDomainObjPrivatePtr` parameter was avoided being passed
as a paramter in functions `qemuDomainObjPrivateXMLParseJob`
and `qemuDomainObjPrivateXMLFormatJob`, as we already pass
`virDomainObjPtr`, which can be used to get `privateData`
pointer.
Signed-off-by: Prathamesh Chavan <pc44800@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
During disk hot plugging, qemuDomainAttachDeviceLive() adds the new
disk to the device list of the VM object. However, hot plugging
cdroms and floppies only updates the src variable of the original
disk device, so the newly generated disk object needs to be freed.
Signed-off-by: Jin Yan <jinyan12@huawei.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This is only used in the ESX driver where, when set to "static", it will
ignore all the checks libvirt does about the origin of the MAC address
(whether or not it's in a VMWare OUI) and forward the original one to
the ESX server telling it not to check it either.
This allows keeping a deterministic MAC address which can be useful for
licensed software which might dislike changes.
Signed-off-by: Bastien Orivel <bastien.orivel@diateam.net>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use g_autoptr() and remove both 'error' and 'cleanup' labels.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use g_autoptr() and remove the 'cleanup' label.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use g_autoptr() and remove the unneeded 'cleanup' label.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use g_autoptr() and remove the obsolete 'error' label.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use g_autoptr() and remove the 'cleanup' label.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Next patch will use g_autoptr() in a qemuMigrationCookiePtr pointer to
modernize qemuMigrationSrcBeginPhase().
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use g_autoptr() and remove the now obsolete 'cleanup' label.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use g_autoptr() and remove both 'cleanup' and 'error' labels.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use g_autoptr() and remove the 'cleanup' label.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use g_autofree and remove the 'cleanup' label.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use variable autocleanup and remove the now obsolete 'cleanup'
label.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use g_autoptr() on pointers and remove the unneeded 'cleanup'
label.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use g_autofree and remove the unneeded 'cleanup' label.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use g_autofree on strings and remove the 'done' label since it's
now unneeded.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use g_autoptr() and remove the 'cleanup' label.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add headers with declarations of geteuid/getegid
and virGetUserName/virGetGroupName.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
While moving the code, qemuDomainNamespace also was moved
to `qemu_domainjob`. Hence it is moved back to `qemu_domain`
where it will be more appropriate.
Signed-off-by: Prathamesh Chavan <pc44800@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
With meson introduction which is using the same CFLAGS for the whole
project some compilation errors were discovered. The wireshark plugin
library is the only one in tools directory that is not using AM_CFLAGS.
With the AM_CFLAGS we get these errors:
../../tools/wireshark/src/packet-libvirt.c: In function 'dissect_libvirt_fds':
../../tools/wireshark/src/packet-libvirt.c:348:31: error: unused parameter 'tvb' [-Werror=unused-parameter]
348 | dissect_libvirt_fds(tvbuff_t *tvb, gint start, gint32 nfds)
| ~~~~~~~~~~^~~
../../tools/wireshark/src/packet-libvirt.c:348:41: error: unused parameter 'start' [-Werror=unused-parameter]
348 | dissect_libvirt_fds(tvbuff_t *tvb, gint start, gint32 nfds)
| ~~~~~^~~~~
../../tools/wireshark/src/packet-libvirt.c:348:55: error: unused parameter 'nfds' [-Werror=unused-parameter]
348 | dissect_libvirt_fds(tvbuff_t *tvb, gint start, gint32 nfds)
| ~~~~~~~^~~~
At top level:
../../tools/wireshark/src/packet-libvirt.c:64:5: error: 'dissect_xdr_bool' defined but not used [-Werror=unused-function]
64 | dissect_xdr_##xtype(tvbuff_t *tvb, proto_tree *tree, XDR *xdrs, int hf) \
| ^~~~~~~~~~~~
../../tools/wireshark/src/packet-libvirt.c:88:1: note: in expansion of macro 'XDR_PRIMITIVE_DISSECTOR'
88 | XDR_PRIMITIVE_DISSECTOR(bool, bool_t, boolean)
| ^~~~~~~~~~~~~~~~~~~~~~~
../../tools/wireshark/src/packet-libvirt.c:64:5: error: 'dissect_xdr_float' defined but not used [-Werror=unused-function]
64 | dissect_xdr_##xtype(tvbuff_t *tvb, proto_tree *tree, XDR *xdrs, int hf) \
| ^~~~~~~~~~~~
../../tools/wireshark/src/packet-libvirt.c:86:1: note: in expansion of macro 'XDR_PRIMITIVE_DISSECTOR'
86 | XDR_PRIMITIVE_DISSECTOR(float, gfloat, float)
| ^~~~~~~~~~~~~~~~~~~~~~~
../../tools/wireshark/src/packet-libvirt.c:64:5: error: 'dissect_xdr_short' defined but not used [-Werror=unused-function]
64 | dissect_xdr_##xtype(tvbuff_t *tvb, proto_tree *tree, XDR *xdrs, int hf) \
| ^~~~~~~~~~~~
../../tools/wireshark/src/packet-libvirt.c:80:1: note: in expansion of macro 'XDR_PRIMITIVE_DISSECTOR'
80 | XDR_PRIMITIVE_DISSECTOR(short, gint16, int)
| ^~~~~~~~~~~~~~~~~~~~~~~
../../tools/wireshark/src/packet-libvirt.c: In function 'dissect_libvirt_message':
../../tools/wireshark/src/packet-libvirt.c:423:34: error: null pointer dereference [-Werror=null-dereference]
423 | vir_xdr_dissector_t xd = find_payload_dissector(proc, type, get_program_data(prog, VIR_PROGRAM_DISSECTORS),
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
424 | *(gsize *)get_program_data(prog, VIR_PROGRAM_DISSECTORS_LEN));
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The current code to check XDR support was obsolete and way to
complicated.
On linux we can use pkg-config to check for libtirpc and have
the CFLAGS and LIBS configured by it as well.
On MinGW there is portablexdr library which installs header files
directly into system include directory.
On FreeBSD and macOS XDR functions are part of libc so there is
no library needed, we just need to call AM_CONDITIONAL to silence
configure which otherwise complains about missing WITH_XDR.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All of the listed functions are available in libselinux version 2.2.
Our supported OSes start with version 2.5 so there is no need to check
it.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Just like in the previous commit, the stdin_path argument of
virSecurityManagerSetAllLabel() is renamed to incomingPath.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The argument (if not NULL) points to the file the domain is
restoring from. On QEMU command line this used to be '-incoming
$path', but we've switched to passing FD ages ago and thus this
argument is used only in AppArmor (which loads the profile on
domain start). Anyway, the argument does not refer to stdin,
rename it to 'incomingPath' then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The only consumer was removed in the previous commit.
This reverts commit f03a38bd1d.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Currently, when restoring from a domain the path that the domain
restores from is labelled under qemuSecuritySetAllLabel() (and after
v6.3.0-rc1~108 even outside transactions). While this grants QEMU
the access, it has a flaw, because once the domain is restored, up
and running then qemuSecurityDomainRestorePathLabel() is called,
which is not real counterpart. In case of DAC driver the
SetAllLabel() does nothing with the restore path but
RestorePathLabel() does - it chown()-s the file back and since there
is no original label remembered, the file is chown()-ed to
root:root. While the apparent solution is to have DAC driver set the
label (and thus remember the original one) in SetAllLabel(), we can
do better.
Turns out, we are opening the file ourselves (because it may live on
a root squashed NFS) and then are just passing the FD to QEMU. But
this means, that we don't have to chown() the file at all, we need
to set SELinux labels and/or add the path to AppArmor profile.
And since we want to restore labels right after QEMU is done loading
the migration stream (we don't want to wait until
qemuSecurityRestoreAllLabel()), the best way to approach this is to
have separate APIs for labelling and restoring label on the restore
file.
I will investigate whether AppArmor can use the SavedStateLabel()
API instead of passing the restore path to SetAllLabel().
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1851016
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
These APIs are are basically
virSecuritySELinuxDomainSetPathLabelRO() and
virSecuritySELinuxDomainRestorePathLabel().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
These APIs don't use namespaces because the
virSecurityManagerSetSavedStateLabel() runs
when the namespace doesn't exist yet and thus
the virSecurityManagerRestoreSavedStateLabel()
has to run without namespace too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
These APIs were removed/renamed in v6.5.0-rc1~142 and v6.5.0-rc1~141
because they deemed unused. And if it wasn't for the RFE [1] things
would stay that way.
The RFE asks for us to not change DAC ownership on the file a domain is
restoring from. We have been doing that for ages (if not forever),
nevertheless it's annoying because if the restore file is on an NFS
remembering owner won't help - NFS doesn't support XATTRs yet. But more
importantly, there is no need for us to chown() the file because when
restoring the domain the file is opened and the FD is then passed to
QEMU. Therefore, we really need only to set SELinux and AppArmor.
This reverts bd22eec903.
This partially reverts 4ccbd207f2.
The difference to the original code is that secdrivers are now
not required to provide dummy implementation to avoid
virReportUnsupportedError(). The callback is run if it exists, if
it doesn't zero is returned without any error.
1: https://bugzilla.redhat.com/show_bug.cgi?id=1851016
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
When locking files for metadata change, we open() them for R/W
access. The write access is needed because we want to acquire
exclusive (write) lock (to mutually exclude with other daemons
trying to modify XATTRs on the same file). Anyway, the open()
might fail if the file lives on a RO filesystem. Well, if that's
the case, ignore the error and continue with the next file on the
list. We won't change any seclabel on the file anyway - there is
nothing to remember then.
Reported-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In the light of recent commit of 9d83281382 fix the comment that
says directories can't be locked. Well, in general they can, but
not in our case.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit <5b816e16968ba02def56f067774ecd9a8c8d44d7> removed hard-coded
sysconfdir path from *.conf files but missed virtproxyd.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit <f650e86703847af544762d02f79c70131ff7fbab> added check for
openpty function from util library using AC_CHECK_LIB(). However, that
macro doesn't define OPENPTY_LIBS, it only defines WITH_LIBUTIL and
prepends -lutil into LIBS for the whole project.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It was introduced by commit <c606671aaad10a9bc87f226bc473a091e00a9629>
as a gnulib ldexp module and later removed by commit
<09fe607b4de8eb883c966e90aaf5563299a22738>.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Fixes inconsistency with macro names for external programs.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit <0985a9597bb0348d46c0d18dc548a676bf0ad8e2> added unused variable
so remove it.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit <894556ca813ad3c4ebb01083b7971d73b4f53c8b> moved function
virSecretGetSecretString out of secret directory but forgot to update
CFLAGS in places where the include is no longer needed.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit <fd3b8fe7ad491c77c0b3f57110adaf64f743855e> removed objectlocking
test but forgot to remove all of the usages of LOCK_CHECKING_CFLAGS.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Function sanlock_write_lockspace() was introduced in 2.7 version which
is available in all supported OSes.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Function sanlock_killpath() was introduced in 2.4 version and had
modified one of the arguments from `char *` into `const char *` in
version 2.7. All of this is available in all supported OSes.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
SANLK_INQ_WAIT was introduced in sanlock 2.4 which is available in all
supported OSes.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This check was introduced by commit
<96a02703daad4dc6663165adbc0feade9900cebd> to guard calling
sanlock_inq_lockspace() function but it used SANLK_INQ_WAIT as a
parameter which was introduced later. This was eventually fixed by
commit <238dba0f9c925359cb3b8beddd8c8ae739cb4e06>.
We can safely replace check for sanlock_inq_lockspace as that function
was introduced in sanlock-1.9. The oldest used version, sanlock-2.2,
is by Ubuntu 16.04.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This was introduced together with clock-time gnulib module by commit
<d74e5a4dfc434d3a1d01856d013a7f50d910fa95> and removed from libvirt
by commit <86d223a762990c9d529065a2d3b30b6a00ea63dd>.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Set FLAT_NAMESPACE_FLAGS to -Wl,-flat_namespace in configure only for
macOS and use it unconditionally in Makefiles.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There is no need to have DRIVER_MODULES_LIBS as it's used only for
libvirt.so. The other places are using DLOPEN_LIBS directly and dlopen
is required if building with libvirtd.
It's mandatory since <5aec02dc37623bf739d1edd8f2be3e4ad9f94ff5>.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virFileIsAccessible does not return true on accessible
directories. Check whether it set EISDIR and only
then assume the directory is inaccessible.
Return 0 (not found) instead of 1 (found),
since the bridge driver taints the network based on
this return value, not whether the hook actually ran.
Remove the bogus check from virHookCall, since it already
checks the virHooksFound bitmap that was filled before
by virHookCheck.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Fixes: 7fa7f7eeb6
Closes: https://gitlab.com/libvirt/libvirt/-/issues/47
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
- Add a check for asm/hwcap.h header presence,
- Add a check for getauxval() function that is used
on Linux, and for elf_aux_info() which is a FreeBSD
equivalent.
This is based on a patch submitted by Mikael Urankar in
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=247722.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When preparing for the removal of GNULIB commit 18dca21a32 removed the
unneeded O_DIRECTORY, but unfortunately started opening the directory for
writing which fails every time for a directory. There is also no need for that
as flock() works on O_RDONLY file descriptor as well, even for LOCK_EX.
https://bugzilla.redhat.com/1852741
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
All modified functions are similar, in all cases "cleanup" label is removed,
along with all the "goto" calls.
Signed-off-by: Nicolas Brignone <nmbrignone@gmail.com>
Reviewed-by: Laine Stump <laine@redhat.com>
libxlMakeNic was calling g_strdup(virBufferCurrentContent(&buf)) to
make a copy of the buffer contents, and then later freeing the buffer
without ever using it again. Instead of this extra strdup, just
transfer ownership of the virBuffer's string with
virBufferContentAndReset(), and be done with it.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are several calls to virBufferFreeAndReset() when functions
encounter an error, but the caller never uses the virBuffer once an
error has been encountered (all callers detect error by looking at the
function return value, not the contents of the virBuffer being
operated on), and now that all virBuffers are auto-freed there is no
reason for the lower level functions like these to spend time freeing
a buffer that is guaranteed to be freed momentarily anyway.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Every other caller of this function checks for an error return and
ends their formatting early if there is an error. This function
happily continues on its way.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The latter function is guaranteed to always clear out the virBuffer
anyway, so this is redundant and could add to extra cargo-cult code if
used as an example.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In most cases this eliminates one or more calls to
virBufferClearAndReset(), but even when it doesn't it's better because:
1) it makes the code more consistent, making it more likely that new
contributors who are "learning by example" will to the right thing.
2) it protects against future modifications that might have otherwise
needed to add a virBufferClearAndReset()
3) Currently some functions don't call virBufferClearAndReset() only
because they're relying on some subordinate function to call it for
them (e.g. bhyveConnectGetSysinfo() in this patch relies on
virSysinfoFormat() to clear out the buffer when there is an
error). I think this is sloppy behavior, and that the toplevel
function that defines and initializes the buffer should be the
function clearing it at the end.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The output of vcpupin and emulatorpin for a domain with vcpu
placement='static' is based on a default bitmap that contains
all possible CPUs in the host, regardless of the CPUs being offline
or not. E.g. for a Linux host with this CPU setup (from lscpu):
On-line CPU(s) list: 0,8,16,24,32,40,(...),184
Off-line CPU(s) list: 1-7,9-15,17-23,25-31,(...),185-191
And a domain with this configuration:
<vcpu placement='static'>1</vcpu>
'virsh vcpupin' will return the following:
$ sudo ./run tools/virsh vcpupin vcpupin_test
VCPU CPU Affinity
----------------------
0 0-191
This is benign by its own, but can make the user believe that all
CPUs from the 0-191 range are eligible for pinning. Which can lead
to situations like this:
$ sudo ./run tools/virsh vcpupin vcpupin_test 0 1
error: Invalid value '1' for 'cpuset.cpus': Invalid argument
This is exarcebated by the fact that 'virsh vcpuinfo' considers only
available host CPUs in the 'CPU Affinity' field:
$ sudo ./run tools/virsh vcpuinfo vcpupin_test
(...)
CPU Affinity: y-------y-------y-------(...)
This patch changes the default bitmap of vcpupin and emulatorpin, in
the case of domains with static vcpu placement, to all available CPUs
instead of all possible CPUs. Aside from making it consistent with
the behavior of 'vcpuinfo', users will now have one less incentive to
try to pin a vcpu in an offline CPU.
https://bugzilla.redhat.com/show_bug.cgi?id=1434276
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The idea is to have a function that calls virHostCPUGetOnlineBitmap()
but, instead of returning NULL if the host does not have CPU
offlining capabilities, fall back to a bitmap containing all
present CPUs.
Next patch will use this helper in two other places.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This function reads the string in sysfspath/cpu/present and
parses it manually to retrieve the number of present CPUs.
virHostCPUGetPresentBitmap() reads and parses the same file,
using a more robust parser via virBitmapParseUnlimited(),
but returns a bitmap. Let's drop all the manual parsing done
here and simply return the size of the resulting bitmap
from virHostCPUGetPresentBitmap().
Given that no more parsing is being done manually in the function,
rename it to virHostCPUCountLinux().
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since the ESX virtual hardware version 4.0, virtual machines support up
to 10 virtual NICs instead of 4 previously. This changes the limit
accordingly based on the provided `virtualHW.version`.
Signed-off-by: Bastien Orivel <bastien.orivel@diateam.net>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If the name is 'vcpus', we will get 'vcpussched' instead of 'vcpusched'
in the error message as following:
... 19155 : vcpussched attributes 'vcpus' must not overlap
So we use 'vcpu' to replace 'vcpus'.
Signed-off-by: Liao Pingfang <liao.pingfang@zte.com.cn>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
A few commits ago, in aeecbc87b7, I've implemented command line
generation for ACPI HMAT. For this, we need to know if at least
one guest NUMA node has vCPUs. This is tracked in
@masterInitiator variable, which is initialized to -1, then we
iterate through guest NUMA nodes and break the loop if we find a
node with a vCPU. After the loop, if masterInitiator is still
negative then no NUMA node has a vCPU and we error out. But this
exact check was missing comparison for negativeness.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This capability tracks whether QEMU is capable of defining HMAT
ACPI table for the guest.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
These APIs will be used by QEMU driver when building the command
line.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
There are several restrictions, for instance @initiator and
@target have to refer to existing NUMA nodes (daa), @cache has to
refer to a defined cache level and so on.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
To cite ACPI specification:
Heterogeneous Memory Attribute Table describes the memory
attributes, such as memory side cache attributes and bandwidth
and latency details, related to the System Physical Address
(SPA) Memory Ranges. The software is expected to use this
information as hint for optimization.
According to our upstream discussion [1] this is exposed under
<numa/> as <cache/> under NUMA <cell/> and <latency> or
<bandwidth/> under numa/latencies.
1: https://www.redhat.com/archives/libvir-list/2020-January/msg00422.html
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
QEMU allows creating NUMA nodes that have memory only.
These are somehow important for HMAT.
With check done in qemuValidateDomainDef() for QEMU 2.7 or newer
(checked via QEMU_CAPS_NUMA), we can be sure that the vCPUs are
fully assigned to NUMA nodes in domain XML.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
There is only one caller of virDomainNumaSetNodeCpumask() which
checks for the return value but because the function will return
NULL iff the @cpumask was NULL in the first place. But in that
place @cpumask can't be NULL because it was just allocated by
virBitmapParse().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The machine can not be NULL at this point -
qemuDomainDefPostParse() makes sure it isn't.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The function doesn't just build the argument for -numa. Since the
-numa can be repeated multiple times, it also puts -numa onto the
cmd line. Also, the rest of the functions has 'Command' infix.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
There are two functions virDomainNumaDefCPUFormatXML() and
virDomainNumaDefCPUParseXML() which format and parse domain's
<numa/>. There is nothing CPU specific about them. Drop the
infix.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
There is nothing domain specific about the function, thus it
should not have virDomain prefix. Also, the fact that it is a
static function makes it impossible to use from other files.
Move the function to virxml.c and drop the 'Domain' infix.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Commit 82576d8f35 used a string "on" to enable the 'pmem' property.
This is okay for the command line visitor, but the property is declared
as boolean in qemu and thus it will not work when using QMP.
Modify the type to boolean. This changes the command line, but
fortunately the command line visitor in qemu parses both 'yes' and 'on'
as true for the property.
https://bugzilla.redhat.com/show_bug.cgi?id=1854684
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Previous commit removed the last usage of the function. Drop
virQEMUCapsCompareArch as well since virQEMUCapsCacheLookupByArch was
its only caller.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Firstly, SEV is present only on AMD, so we can safely assume x86.
Secondly, the problem with looking up capabilities in the cache by arch
is that it's using virHashSearch with a callback to find the right
capabilities and get the binary name from it as well, but since the
cache is empty, it will return NULL and we won't get the corresponding
binary name out of the lookup either. Then, during the cache validation
we try to create a new cache entry for the emulator, but since we don't
have the binary name, nothing gets created.
Therefore, virQEMUCapsCacheLookupDefault is used to fix this issue,
because it doesn't rely on the capabilities cache to construct the
emulator binary name.
https://bugzilla.redhat.com/show_bug.cgi?id=1852311
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The semantics of the backup operation don't strictly require that all
disks being backed up are part of the same incremental part (when a disk
was checkpointed/backed up separately or in a different VM), or even
they may not have a previous checkpoint at all (e.g. when the disk
was freshly hotplugged to the vm).
In such cases we can still create a common checkpoint for all of them
and backup differences according to configuration.
This patch adds a per-disk configuration of the checkpoint to do the
incremental backup from via the 'incremental' attribute and allows
perform full backups via the 'backupmode' attribute.
Note that no changes to the qemu driver are necessary to take advantage
of this as we already obey the per-disk 'incremental' field.
https://bugzilla.redhat.com/show_bug.cgi?id=1829829
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Use the configured TLS env to setup encryption of the TLS transport.
https://bugzilla.redhat.com/show_bug.cgi?id=1822631
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Allow enabling TLS for the NBD server used to do pull-mode backups. Note
that documentation already mentions 'tls', so this just implements the
schema and XML bits.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
TLS is required to transport backed-up data securely when using
pull-mode backups.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Add fields for storing the aliases necessary to clean up the TLS env for
a backup job after it finishes.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Data is valid only when queried as guest writes may increase the backup
size.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Introduce code which merges the appropriate bitmaps and queries the
final size of the backup, so that we can print the XML with size
information.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Avoid printing '0' size in case when we weren't able to determine the
backup size by adding a flag whether the size is valid and interlock
printing of the field according to the flag.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Merge the bitmaps when finalizing a block pull job so that backups work
properly afterwards.
https://bugzilla.redhat.com/show_bug.cgi?id=1799010
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Users may want to use this to create a full backup or even incremental
if the checkpoints are pre-existing. We still will not allow to create a
checkpoint on a read-only disk as that makes no sense.
https://bugzilla.redhat.com/show_bug.cgi?id=1840053
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Setup the TLS secret when preparing a virStorageSource for use.
https://bugzilla.redhat.com/show_bug.cgi?id=1602328
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Until now libvirt didn't allow using encrypted TLS key for disk clients.
Add fields for configuring the secret and propagate defaults.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Add infrastructure for hot- and cold-plug of the secret object holding
decryption key for the TLS key.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Store the required data in the private data of a storage source and
ensure that the 'alias' of the secret is formatted in the status XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The '*_tls_x509_verify' options are relevant only when we are going to
expose a server socket as client sockets always enable verification.
Split up the macro to separate the common bits from the server bits so
that when we'll later extend support of 'nbd' and 'vxhs' disks which are
client only we can reuse the existing macros.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Move the extraction of the config value so that it makes more sense
after upcoming refactors.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
There's no such parameter. Reword the sentence to account for enabling
TLS-encrypted migration using API flags.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Add a helper which will always return the storage source private data
even if it was not allocated before.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The strings allocated in virGetHostnameImpl() are all allocated via
g_strdup(), which will exit on OOM anyway, so the call to
virReportOOMError() is redundant, and removing it allows slight
modification to the code, in particular the cleanup label can be
eliminated.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The error: label in this function just does "return -1", so replace
all the "goto error" in the function with "return -1".
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
hostsfilestr was not being freed. This will be turned into g_autofree
in an upcoming patch converting a lot more of the same file to using
g_auto*, but I wanted to make a separate patch for this first so the
other patch is simpler to review (and to make backporting easier).
The leak was introduced in commit 97a0aa2467
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
AUTOPTR_CLEANUP_FUNC is set to xmlBufferFree() in util/virxml.h (This
is actually new - added accidentally (but fortunately harmlessly!) in
commit 257aba2daf. I had added it along with the hunks in this patch,
then decided to remove it and submit separately, but missed taking out
the hunk in virxml.h)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Although libvirt itself uses g_malloc0() and friends, which exit when
there isn't enouogh memory, libxml2 uses standard malloc(), which just
returns NULL on OOM - this means we must check for NULL on return from
any libxml2 functions that allocate memory.
xmlBufferCreate(), for example, might return NULL, and we don't always
check for it. This patch adds checks where it isn't already done.
(NB: Although libxml2 has a provision for changing behavior on OOM (by
calling xmlMemSetup() to change what functions are used to
allocating/freeing memory), we can't use that, since parts of libvirt
code end up in libvirt.so, which is linked and called directly by
applications that may themselves use libxml2 (and may have already set
their own alternate malloc()), e.g. drivers like esx which live totally
in the library rather than a separate process.)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When introducing vcpu.<num>.wait (v1.3.2-rc1~301) and
vcpu.<num>.halted (v2.4.0-rc1~36) the documentation was
not written.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Since feb83c1e71 libvirtd will abort on
startup if run as non-root
2020-07-01 16:30:30.738+0000: 1647444: error : virDirOpenInternal:2869 : cannot open directory '/etc/libvirt/hooks/daemon.d': Permission denied
The root cause flaw is that non-root libvirtd is using /etc/libvirt for
its hooks. Traditionally that has been harmless though since we checked
whether we could access the hook file and degraded gracefully. We need
the same access check for iterating over the hook directory.
Long term we should make it possible to have an unprivileged hook dir
under $HOME.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In 076591009a a validation code was added to
virDomainDeviceInfoFormat() which reports an error if zPCI
address entered in was incomplete. But, there are two problems
with this approach.
The first problem is the placement of the code - it doesn't
belong into XML formatter rather than XML validator.
The second one is that at the point of formatting XML the post
parse callback has run and thus filled in required info.
Therefore this check can never do something useful and instead of
moving it into validator, it's removed completely.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
To make the code future proof, the rest of the
qemuValidateDomainDeviceDefAddress() has to be executed (even
though there is nothing there yet) instead of returning directly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Commit 076591009a ("conf: fix zPCI address auto-generation on
s390") is doing a check for virZPCIDeviceAddressIsIncomplete()
prior to checking if the device has a ZPCI address at all. This
results in errors like these when starting libvirt:
error : virDomainDeviceInfoFormat:7527 : internal error:
Missing uid or fid attribute of zPCI address
Fix it by moving virZPCIDeviceAddressIsIncomplete() after the
check done by virZPCIDeviceAddressIsPresent().
Fixes: 076591009a
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The ZPCI device validation is specific to qemu. So, let us move the
ZPCI uid validation out of domain xml parsing into qemu domain device
validation.
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Let us fix the issues with zPCI address validation and auto-generation
on s390.
Currently, there are two issues with handling the ZPCI address
extension. Firstly, when the uid is to be auto-generated with a
specified fid, .i.e.:
...
<address type='pci'>
<zpci fid='0x0000001f'/>
</address>
...
we expect uid='0x0001' (or the next available uid for the domain).
However, we get a parsing error:
$ virsh define zpci.xml
error: XML error: Invalid PCI address uid='0x0000', must be > 0x0000
and <= 0xffff
Secondly, when the uid is specified explicitly with the invalid
numerical value '0x0000', we actually expect the parsing error above.
However, the domain is being defined and the uid value is silently
changed to a valid value.
The first issue is a bug and the second one is undesired behaviour, and
both issues are related to how we (in-band) signal invalid values for
uid and fid. So let's fix the XML parsing to do validation based on what
is actually specified in the XML.
The first issue is also related to the current code behaviour, which
is, if either uid or fid is specified by the user, it is incorrectly
assumed that both uid and fid are specified. This bug is fixed by
identifying when the user specified ZPCI address is incomplete and
auto-generating the missing ZPCI address.
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Refer to the notion of mount propagation instead which describes
the actual behaviour more clearly.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The two sides of a PTY can be referred to as primary and secondary
TTYs.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When querying QEMU we have to iterate over two nested sets
of CPUs. The terms "main vcpu" and "sub vcpu" are a good
representation.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The two sides of a PTY can be referred to as primary and secondary
TTYs.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The term "ignored" is a better choice for the filtering performed
on devices from udev.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This new naming matches the terminology used in the error
messages that the callers report.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When listing CPU models, we need to filter the data based on sets
of permitted and forbidden CPU models.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The term "access control list" better describes the concept involved.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The term "access control list" better describes the concept involved.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Although a ramfb video device is not a PCI device, we don't currently
report an error for ramfb device definitions containing a PCI address.
However, a guest configured with such a device will fail to start:
# virsh start test1
error: Failed to start domain test1
error: internal error: qemu unexpectedly closed the monitor: 2020-06-16T05:23:02.759221Z qemu-kvm: -device ramfb,id=video0,bus=pcie.0,addr=0x1: Device 'ramfb' can't go on PCIE bus
A better approach is to reject any device definitions that contain PCI
addresses. While this is a change in behavior, any existing
configurations were non-functional.
https://bugzilla.redhat.com/show_bug.cgi?id=1847259
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
A few commits back (in v6.4.0-131-gbdb8f2e418) the post parse
function for domain interface was changed so that it doesn't fill
in model for hostdev types of interfaces (including network type
interfaces which would end up hostdevs).
While the idea is sound, the execution can be a bit better:
virDomainNetResolveActualType() which is used to determine
runtime type of given interface is heavy gun - it connects to
network driver, fetches network XML, parses it. This all is
followed by check whether the interface doesn't already have
model set (from domain XML).
If we switch the order of these two checks then the short circuit
evaluation will ensure the expensive check is done only if really
needed.
This commit in fact fixes qemuxml2xmltest which due to lacking
fake network driver tries to connect to network:///session and
start the virtnetworkd. Fortunately, because of
v6.3.0-25-gf28fbb05d3 it fails to do so and
virDomainNetResolveActualType() returns -1. The only reason we
don't see the test failing is because our input XMLs have model
and thus we are saved by the latter (now former) check.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Until recently, an <interface type='network'> would automatically be
assigned model "rtl8139", which in turn would lead to the device being
assigned a PCI address on a conventional PCI controller (i.e. a
pcie-to-pci-bridge). If the network was a typical Linux host
bridge-based network that used an emulated device, this would be
appropriate, since the guest actually would get an emulated rtl8139
NIC, and that device is a conventional PCI device.
However, if the network being used was a pool of hostdev devices, the
guest would get an actual PCIe network device assigned from the host
via VFIO; while the interface model in that case is irrelevant for the
QEMU commandline to assign the device, the PCI address would have
already been assigned prior to runtime, so the address assignment
would be done based on the model='rtl8139' - a conventional PCI
device. VFIO assignment of a PCIe device to a conventional PCI slot
works, but we would rather have these devices in a PCIe slot.
Since commit bdb8f2e418, if <interface type='network'> points to a
etwork that is a pool of hostdev devices, the interface model will be
_unset_ by default. This patch uses that information when deciding
what type of slot to assign to the device: since all hostdev network
interfaces are SR-IOV VFs, and *all* SR-IOV network cards are PCIe, it
is safe to assume that the VFs are PCIe and we should assign then to a
PCIe slot in the guest.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
All the domain job related APIs were present in `qemu_domain.c`
along with the other domain APIs. In this patch, we move all the
qemu domain job APIs into a separate file.
Also, in this process, `qemuDomainTrackJob()`,
`qemuDomainFreeJob()`, `qemuDomainInitJob()` and
`qemuDomainObjSaveStatus()` were converted to a non-static
funciton and exposed using `qemu_domain.h`.
Signed-off-by: Prathamesh Chavan <pc44800@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In functions `qemuDomainObjInitJob`, `qemuDomainObjResetJob`,
`qemuDomainObjResetAgentJob`, `qemuDomainObjResetAsyncJob`,
`qemuDomainObjFreeJob`, `qemuDomainJobAllowed`,
`qemuDomainNestedJobAllowed` we avoid sending the complete
qemuDomainObjPrivatePtr as parameter and instead just send
qemuDomainJobObjPtr.
This is done in a effort to separating the qemu-job APIs into
a spearate file.
Signed-off-by: Prathamesh Chavan <pc44800@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Some functions or code paths that may fail don't report error
(e.g. when acquiring PID file fails) leading to a silent quit
of the leaseshelper. This makes it super hard for us and users
to debug what is happening. Fortunately, dnsmasq captures both
stdout and stderr so we can write an error message there.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
On a DHCP transaction, dnsmasq runs our leases helper which
updates corresponding JSON files. While one dnsmasq won't run the
leaseshelper in parallel, two dnsmasqs (from two distinct
networks) might. To avoid corrupting JSON file, the leaseshelper
acquires PID file first. Well, the way it's acquiring it is not
ideal - it calls virPidFileAcquirePath(wait = false); which
means, that either it acquires the PID file instantly or returns
an error and does not touch the JSON at all. This in turn means
that there might be a leases record missing. With wait = true,
this won't happen.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1840307
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The "virsh domcapabilities --arch ppc64" command will fail with no
error message set if qemu-system-ppc64 is not currently installed.
This is because virQEMUCapsCacheLookup() does not report any error
message if not capabilities can be obtained from the cache. Almost
all methods calling this expected an error to be set on failure.
Once that's fixed though, we see a further bug which is that
virQEMUCapsCacheLookupDefault() is passing a NULL binary path to
virQEMUCapsCacheLookup(), so we need to catch that too.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
It's possible to use ramfb as the boot display of an assigned vgpu
device. This was introduced in 4b95738c, but unfortunately the attribute
was not formatted into the xml output for such a device. This patch
fixes that oversight and adds a xml2xml test to verify proper behavior.
https://bugzilla.redhat.com/show_bug.cgi?id=1847791
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The XML format used for QEMU capabilities is not required to be
stable across releases, as we invalidate the cache whenever the
libvirt binary changes.
We none the less always try to parse te entire XML file before
we do any validity checks. Thus if we change the format of any
part of the data, or change permitted values for enums, then
libvirtd logs will be spammed with errors.
These are not in fact errors, but an expected scenario.
This change makes the loading code validate the cache timestamp
against the libvirtd timestamp immediately. If they don't match
then we stop loading the rest of the XML file.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
It is easier for management software (and subsequently
distributions) to install hook script under
/etc/libvirt/hooks/$driver.d/ and have libvirt execute them in
alphabetical order. To maintain backwards compatibility,
/etc/libvirt/hooks/$driver hook script is executed the first
followed by scripts from the $driver.d directory.
The stdio is chained between the scripts. The output of the first
script is input of the second and so on.
Signed-off-by: Dmitry Nesterenko <dmitry.nesterenko@virtuozzo.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This refactor is needed to support support hooks placed in
several files.
Signed-off-by: Dmitry Nesterenko <dmitry.nesterenko@virtuozzo.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch wraps it up all the wiring done in previous patches,
enabling a PPC64 guest to launch a guest using a TPM Proxy
device.
Note that device validation is already being done in qemu_validate.c,
qemuValidateDomainDeviceDefTPM(), on domain define time. We don't
need to verify QEMU capabilities for this device again inside
qemu_command.c.
Tested-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Previous patch handled the conversion of def->tpm to the
array def->tpms and the XML parsing logic. This patch handles
the validations needed to ensure the intended behavior.
The existing qemuValidateDomainDeviceDefTPM() function was updated
to guarantee that the VIR_DOMAIN_TPM_MODEL_SPAPR_PROXY model is
exclusive to PPC64 guests and to the VIR_DOMAIN_TPM_TYPE_PASSTHROUGH
backend.
A new function called qemuDomainDefTPMsPostParse() was added to guarantee
that the following combinations in the same domain are valid:
- a single TPM device
- a single TPM Proxy device
- a single TPM + single TPM Proxy devices
And these combinations in the same domain are NOT valid:
- 2 or more TPM devices
- 2 or more TPM Proxy devices
Tested-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
A TPM Proxy device can coexist with a regular TPM, but the
current domain definition supports only a single TPM device
in the 'tpm' pointer. This patch replaces this existing pointer
in the domain definition to an array of TPM devices.
All files that references the old pointer were adapted to
handle the new array instead. virDomainDefParseXML() TPM related
code was adapted to handle the parsing of an extra TPM device.
TPM validations after this new scenario will be updated in
the next patch.
Tested-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This trivial rework is aimed to reduce the amount of line changes
made by the next patch, when 'def->tpm' will become a 'def->tpms'
array.
Instead of using a 'switch' where only the VIR_DOMAIN_TPM_TYPE_EMULATOR
label does something, use an 'if' clause instead.
Tested-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
qemuExtDevicesInitPaths() does not need 'ret'.
Tested-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Expose the TPM Proxy support for PPC64 guests by creating a new
cap called QEMU_CAPS_DEVICE_SPAPR_TPM_PROXY.
This device is part of the machinery the guest need to orchestrate
with the PPC64 Ultravisor the transition to the Secure VM (SVM)
mode. Inside QEMU, this device will be used with the H_TPM_COMM
hypercall to connect with the TPM Resource Manager, enabling
the guest to open and close TPM sessions with the host TPM.
Tested-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Use g_autoptr() in qemuCaps to get rid of a virObjectUnref call,
a 'cleanup' label and the 'ret' pointer.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
When building command line for IOMMU or machine, there are two
comments which mention function that validate IOMMU. But they
both refer to old name which was changed in v6.3.0-rc1~246.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Format the address width attribute. Depending on the version of
QEMU it is named 'aw-bits' or 'x-aw-bits'.
Signed-off-by: Menno Lageman <menno.lageman@oracle.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add a new aw_bits attribute to the iommu device to control
the address width of the intel-iommu
Signed-off-by Menno Lageman <menno.lageman@oracle.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Correct the log name for qemu_security.c to qemu.qemu_security
instead of qemu.qemu_process.
Signed-off-by: Liao Pingfang <liao.pingfang@zte.com.cn>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The bitmap name used for the incremental backup would be leaked
otherwise.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Originally the function was cleaning up a failed job only but now
there's other stuff that needs to be cleared too.
Make only steps which clean up after a failed job depend on the
'started' field and execute the rest of the code always.
This fixes a leak of the backup job tracking object and the blockdev-add
helper data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The code would repeatedly mark the first disk's blockjob as started
rather than accessing all the blockjobs. Fix the dereferencing operator.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Two functions called in sequence both initialized the virStorageSource
backing 'store' leading to a memleak.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The cleanup path expects that 'def' is assigned to 'priv->backup', but
that's not the case for early failures. Add a check to stop overwriting
of 'def' so that it can be freed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Using virKModConfig would not simplify any existing code.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
All callers except for the test suite pass the same value
for the second arg, so it can be removed, simplifying the
code.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reuse qemuBlockGetBitmapMergeActions which allows the removal of the
ad-hoc implementation of bitmap merging for block copy.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
New semantics of the bitmap handling don't need this. Remove the field
and all uses of it including the status XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reuse qemuBlockGetBitmapMergeActions which allows removing the ad-hoc
implementation of bitmap merging for block commit. The new approach is
way simpler and more robust and also allows us to get rid of the
disabling of bitmaps done prior to the start as we actually do want to
update the bitmaps in the base.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reuse qemuBlockGetBitmapMergeActions which allows removal of the ad-hoc
implementation of bitmap merging for backup. The new approach is simpler
and also more robust in case some of the bitmaps break as they remove
the dependency on the whole chain of bitmaps working.
The new approach also allows backups if a snapshot is created outside of
libvirt.
Additionally the code is greatly simplified.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Add a function which allows merging bitmaps according to the new
semantics and will allow replacing all the specific ad-hoc functions
currently in use for 'backup', 'block commit', 'block copy' and will
also be usable in the future for 'block pull' and non-shared storage
migration.
The semantics are a bit quirky for the 'backup' case but these quirks
are documented and will prevent us from having two slightly different
algorithms.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Now that we've switched to the simple handling, the first thing that can
be massively simplified is checkpoint deletion. We now need to only go
through the backing chain and find the appropriately named bitmaps and
delete them, no complex lookups or merging.
Note that compared to other functions this deletes the bitmap in all
layers compared to others where we expect only exactly 1 bitmap of a
name in the backing chain to prevent potential problems.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reject duplicates and other problematic bitmaps according to the new
semantics of bitmap use in libvirt.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Chaining bitmaps for checkpoints (disabling the active one and creating
a new) severely overcomplicated all operations in regards to bitmaps.
Specifically it requires us re-matching the on-disk state to the
internal metadata and in case of merging during block jobs it makes it
almost impossible to cover all corner cases.
Since the checkpoints and incremental backups were not yet enabled,
let's change the design to keep one bitmap per checkpoint. In case of
layered snapshots this will be filled in by using dirty-bitmap-populate.
Finally the main reason for this unnecessary complexity was the fear
that qemu's performance could degrade. In the end I think that
addressing the performance issue will be better done in qemu (e.g by
keeping an internal bitmap updated with changes and merging it
periodically back to the real bitmaps. QEMU writes out changes to disk
at shutdown so consistency is not a problem).
Removing the relationships between bitmaps frees us from complex
handling and also makes all the surrounding code more robust as one
broken bitmap doesn't necessarily invalidate whole chains of backups.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Fetch the checkpoint list for every disk specifically based on the new
per-disk 'incremental' field.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
In preparation to allow heterogenous backups store the 'incremental'
field per-disk and fill it by default from the per-backup field.
Having this will be important once we'll want to allow incremental
backup working while hotplugging a new disk.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
If a disk is not captured by one of the intermediate checkpoints the
code would fail, but we can easily calculate the bitmaps to merge
correctly by skipping over checkpoints which don't describe the disk.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The algorithm is getting quite complex. Split out the lookup of range of
backing chain storage sources and bitmaps contained in them which
correspond to one checkpoint.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The CPUID data in *-{disabled,enabled}.xml convert feature names from
the corresponding *.json file into raw CPUID and MSR data and thus some
of them may need to be updated when new features are added into the CPU
map.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Rather than using the AM_LDFLAGS_MOD_NOUNDEF options with the noinstall
library that will come out of libtool from
libvirt_driver_nodedev_impl_la, use it with the installed version
libvirt_driver_nodedev_la.
Broken-by-commit: c44bffb9
Fixes: https://ci.centos.org/job/libvirt-rpm/systems=libvirt-fedora-32/1155/
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add the ability to destroy mdev node devices via the mdevctl utility.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In order to test the nodedev driver, we need to link against a
non-loadable module. Similar to other loadable modules already in the
repository, create an _impl library that can be linked against the unit
tests and then create a loadable module from that.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
With recent additions to the node device xml schema, an xml schema can
now describe a mdev device sufficiently for libvirt to create and start
the device using the mdevctl utility.
Note that some of the the configuration for a mediated device must be
passed to mdevctl as a JSON-formatted file. In order to avoid creating
and cleaning up temporary files, the JSON is instead fed to stdin and we
pass the filename /dev/stdin to mdevctl. While this may not be portable,
neither are mediated devices, so I don't believe it should cause any
problems.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In order to allow libvirt to create and start new mediated devices, we
need to be able to verify that the device has been started. In order to
do this, we'll need to save the UUID of newly-discovered devices within
the virNodeDevCapMdev structure. This allows us to search the device
list by UUID and verify whether the expected device has been started.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In preparation for creating mediated devices in libvirt, we will need to
wait for new mediated devices to be created as well. Refactor
nodeDeviceFindNewDevice() so that we can re-use the main logic from this
function to wait for different device types by passing a different
'find' function.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Mediated devices support arbitrary vendor-specific attributes that can
be attached to a mediated device. These attributes are ordered, and are
written to sysfs in order after a device is created. This patch adds
support for these attributes to the mdev data types and XML schema.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Currently nodeDeviceCreateXML() and nodeDeviceDestroy() only support
NPIV HBAs, but we want to be able to create mdev devices as well. This
is a first step to enabling that support.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When parsing a nodedev xml file, the iommuGroup element should be
optional. This element should be read-only and is determined by the
device driver. While this is a change to existing behavior, it doesn't
break backwards-compatibility because it makes the parser less strict.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Some less commonly used drivers were omitted when we switched
the allocator from a plain VIR_ALLOC to virDomainFSDefNew.
https://bugzilla.redhat.com/show_bug.cgi?id=1846450
Fixes: da665fbd48
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Introduced by commit 72ab0b6dc8 which
added some code depending on libvirt's log format string into
qemuProcessReadLogOutput. This function was deleted by commit
932534e85f later.
Drop the comment.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Closes: https://gitlab.com/libvirt/libvirt/-/issues/35
In a few cases we might set seclabels on a path outside of
namespaces. For instance, when restoring a domain from a file,
the file is opened, relabelled and only then the namespace is
created and the FD is passed to QEMU (see v6.3.0-rc1~108 for more
info). Therefore, when restoring the label on the restore file,
we must ignore domain namespaces and restore the label directly
in the host.
This bug demonstrates itself when restoring a domain from a block
device. We don't create the block device inside the domain
namespace and thus the following error is reported at the end of
(otherwise successful) restore:
error : virProcessRunInFork:1236 : internal error: child reported (status=125): unable to stat: /dev/sda: No such file or directory
error : virProcessRunInFork:1240 : unable to stat: /dev/sda: No such file or directory
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The function calls virSecurityManagerDomainRestorePathLabel()
after all.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The new name is virSecurityManagerDomainRestorePathLabel().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
After previous commit this function is used no more.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
After previous commit this function is used no more.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
There are two places within qemu driver that misuse
qemuSecuritySetSavedStateLabel() to set seclabels on tempfiles
that are not state files: qemuDomainScreenshot() and
qemuDomainMemoryPeek(). They are doing so because of lack of
qemuSecurityDomainSetPathLabel() at the time of their
introduction.
In all three secdrivers (well, four if you count NOP driver) the
implementation of .domainSetSavedStateLabel and
.domainSetPathLabel callbacks is the same anyway.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Libvirt allows the user to define an incomplete NUMA topology, where
the sum of all CPUs in each cell is less than the total of VCPUs.
What ends up happening is that QEMU allocates the non-enumerated CPUs
in the first NUMA node. This behavior is being flagged as 'to be
deprecated' at least since QEMU commit ec78f8114bc4 ("numa: use
possible_cpus for not mapped CPUs check").
In [1], Maxiwell suggested that we forbid the user to define such
topologies. In his review [2], Peter Krempa pointed out that we can't
break existing guests, and suggested that Libvirt should emulate the
QEMU behavior of putting the remaining vCPUs in the first NUMA node
in these cases.
This patch implements Peter Krempa's suggestion. Since we're going
to most likely end up with disjointed NUMA configuration in node 0
after the auto-fill, we're making auto-fill dependent on QEMU_CAPS_NUMA.
A following patch will update the documentation not just to inform
about the auto-fill mechanic with incomplete NUMA topologies, but also
to discourage the user to create such topologies in the future. This
approach also makes Libvirt independent of whether QEMU changes
its current behavior since we're either auto-filling the CPUs in
node 0 or the user (hopefully) is aware that incomplete topologies,
although supported in Libvirt, are to be avoided.
[1] https://www.redhat.com/archives/libvir-list/2019-June/msg00224.html
[2] https://www.redhat.com/archives/libvir-list/2019-June/msg00263.html
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
These helpers will be used in an auto-fill feature for incomplete
NUMA topologies in the next patch.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Given our supported platform matrix, we can safely assume that
all the capability constants we need are defined by the system
headers.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Given our supported platform matrix, we can safely assume that
all the clone constants we need are defined by the system
headers.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Given our supported platform matrix, we can safely assume that
all the mount constants we need are defined by the system
headers.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
No default model should be added to the interface
entry at post parse when its actual network type is hostdev
as doing so might cause a mismatch between the interface
definition and its actual device type.
Signed-off-by: Paulo de Rezende Pinatti <ppinatti@linux.ibm.com>
Reviewed-by: Laine Stump <laine@redhat.com>
The same functionality can be achieved using migrate-set-parameters QMP
command with xbzrle-cache-size parameter.
https://bugzilla.redhat.com/show_bug.cgi?id=1845012
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The same functionality can be achieved using query-migrate-parameters
QMP command and checking the xbzrle-cache-size parameter.
https://bugzilla.redhat.com/show_bug.cgi?id=1829544
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The same functionality can be achieved using migrate-set-parameters QMP
command with downtime-limit parameter.
https://bugzilla.redhat.com/show_bug.cgi?id=1829543
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The same functionality can be achieved using migrate-set-parameters QMP
command with max-bandwidth parameter.
https://bugzilla.redhat.com/show_bug.cgi?id=1829545
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
These parameters were originally set via dedicated commands which are
now deprecated. We want to use migrate-set-parameters instead if
possible.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In v6.4.0-72-g3dda889a44 I've introduced parsing and formatting
of new sysinfo type 'fwcfg'. However, I've forgot to introduce
code that would free parsed data.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This function handles the change of NUMA nodeset for a given
guest, setting CpusetMems for the emulator, vcpus and IOThread
sub-groups. It doesn't set the same nodeset to the root cgroup
though. This means that cpuset.mems of the root cgroup ends up
holding the new nodeset and the old nodeset as well. For
a guest with placement=strict, nodeset='0', doing
virsh numatune <vm> 0 8 --live
Will make cpuset.mems of emulator, vcpus and iothread to be
"8", but cpuset.mems of the root cgroup will be "0,8".
This means that any new tasks that ends up landing in the
root cgroup, aside from the emulator/vcpus/iothread sub-groups,
will be split between the old nodeset and the new nodeset,
which is not what we want.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since a08669c31, @tsc is not automatically free'd by any g_auto* method.
Found by Coverity.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Since 1f5deed9, @veid_str has been leaked in the error path.
Found by Coverity.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Since 60623a7c, @temp_file was not properly free'd on the non error path.
Found by Coverity.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Since 9ea90206, @drvpath could be overwritten if we jumped to recheck
Found by Coverity.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Since 5b82f7f3, @path should have been placed inside the for loop
since it'd need to be free'd for each pass through the loop; otherwise,
we'd leak like a sieve.
Found by Coverity.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Since 5084091a, @authcred is filled by a g_key_file_get_string which is
now an allocated string as opposed to some hash table lookup value, so
we need to treat it as so.
Found by Coverity
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Since 5084091a, @tmp is filled by a g_key_file_get_string which is
now an allocated string as opposed to some hash table lookup value,
so we need to treat it as so.
Found by Coverity
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Domains are now allowed to be pinned to host CPUs with IDs up to 16383.
The new limit is as arbitrary as the old one. It's just bigger.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Implement secure guest check for AMD SEV (Secure Encrypted
Virtualization) in order to invalidate the qemu capabilities
cache in case the availability of the feature changed.
For AMD SEV the verification consists of:
- checking if /sys/module/kvm_amd/parameters/sev contains the
value '1': meaning SEV is enabled in the host kernel;
- checking if /dev/sev exists
Signed-off-by: Paulo de Rezende Pinatti <ppinatti@linux.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This patch introduces a common function to verify if the
availability of the so-called Secure Guest feature on the host
has changed in order to invalidate the qemu capabilities cache.
It can be used as an entry point for verification on different
architectures.
For s390 the verification consists of:
- checking if /sys/firmware/uv is available: meaning the HW
facility is available and the host OS supports it;
- checking if the kernel cmdline contains 'prot_virt=1': meaning
the host OS wants to use the feature.
Whenever the availability of the feature does not match the secure
guest flag in the cache then libvirt will re-build it in order to
pick up the new set of capabilities available.
Signed-off-by: Paulo de Rezende Pinatti <ppinatti@linux.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Tested-by: Viktor Mihajlovski <mihajlov@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Introduce two utility functions to parse a kernel command
line string according to the kernel code parsing rules in
order to enable the caller to perform operations such as
verifying whether certain argument=value combinations are
present or retrieving an argument's value.
Signed-off-by: Paulo de Rezende Pinatti <ppinatti@linux.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This was mostly boilerplate conversion, but in one case I needed to
define several differently named char* to take the place of a single
char *tmp that was re-used multiple times, and in another place there
was a single char* that was used at the toplevel of the function, and
then later used repeatedly inside a for loop, so I defined a new
separate char* inside the loop.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Now that we have support for IPv6 in the iptables helpers, and a new
option in the XML schema, we can wire up support for it in the network
driver.
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Historically IPv6 did not support NAT, so when IPv6 was added to
libvirt's virtual networks, when requesting <forward mode="nat"/>
libvirt will NOT apply NAT to IPv6 traffic, only IPv4 traffic.
This is an annoying historical design decision as it means we
cannot enable IPv6 automatically. We thus need to introduce a
new attribute
<forward mode="nat">
<nat ipv6="yes"/>
</forward>
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
IPv6 does support masquerade since Linux 3.9.0 / ip6tables 1.4.18,
which is Fedora 18 / RHEL-7 vintage, which covers all our supported
Linux versions.
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In v6.4.0-rc1~143 I've introduced a check that is supposed to
return from the function early, if given path is not a dm target.
While the idea is still valid, the implementation had a flaw.
It calls stat() over given path and the uses major(sb.st_dev) to
learn the major of the device. This is then passed to
dm_is_dm_major() which returns true or false depending whether
the device is under devmapper's control or not.
The problem with this approach is in how the major of the device
is obtained - paths managed by devmapper are special files and
thus we want to be using st_rdev instead of st_dev to obtain the
major number. Well, that's what virIsDevMapperDevice() does
already so might as well us that.
Fixes: 01626c668e
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1839992
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
When introducing virdevmapper.c (in v4.3.0-rc1~427) I didn't
realize there is a function that calls in devmapper. The function
is called virIsDevMapperDevice() and lives in virutil.c. Now that
we have a special file for handling devmapper move it there.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Compilers are not very good at detecting this problem. Fixed by manual
inspection of compilation warnings after replacing 'VIR_FREE' with an
empty macro.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com
If one of the early checks to get screen resolution fails 'screenData'
would be passed to VIR_FREE uninitialized. Unfortunately the compiler
isn't able to detect this when VIR_FREE is implemented using
g_clear_pointer.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com
'uri_out' may be passed to VIR_FREE uninitialized if 'conn' is NULL.
Unfortunately the compiler isn't able to detect this problem when
VIR_FREE is implemented using g_clear_pointer. Initialize the variable.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com
This is pretty straightforward and self explanatory.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1837990
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
For the case where -fw_cfg uses a file, we need to set the
seclabels on it to allow QEMU the access. While QEMU allows
writing into the file (if specified on the command line), so far
we are enabling reading only and thus we can use read only label
(in case of SELinux).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This capability tracks whether QEMU supports -fw_cfg command line
option, more specifically whether it allows specifying filename.
There are some releases of QEMU which support -fw_cfg but not
filename. If this is ever a problem we can refine the capability
later on.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
There are recommendations and limitations to the name of the
config blobs we need to follow [1].
We don't want users to change any value only add new blobs. This
means, that the name must have "opt/" prefix and at the same time
must not begin with "opt/ovmf" nor "opt/org.qemu" as these are
reserved for OVMF or QEMU respectively.
1: docs/specs/fw_cfg.txt from qemu.git
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
QEMU has -fw_cfg which allows users to tweak how firmware
configures itself and/or provide new configuration blobs.
Introduce new <sysinfo/> type "fwcfg" that will hold these
new blobs.
It's possible to either specify new value as a string or
provide a filename which contents then serve as the value.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Setting OEM strings for a domain was introduced in
v4.1.0-rc1~315. However, any application that wanted to use them
(e.g. to point to an URL where a config file is stored) had to
'dmidecode -u --oem-string N' (where N is index of the string).
Well, we can expose them under our <sysinfo/> XML and if the
domain is running Libvirt inside it can be obtained using
virConnectGetSysinfo() API.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Since nobody sets custom dmidecode path anymore, we can drop all
code that exists only because of that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Problem with custom dmidecode scripts is that they are hard to
modify, especially if we will want them to act differently based
on passed arguments. So far, we have two scripts which do no more
than 'cat $sysinfo' where $sysinfo is saved dmidecode output.
The virCommandSetDryRun() can be used to trick
virSysinfoReadDMI() thinking it executed real dmidecode.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When trying to decode DMI table, just before constructing
virCommand() the decoder is looked for in PATH using
virFindFileInPath(). Well, this is not necessary because
virCommandRun() will do this too (in virExec()).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Virtually every variable defined in the function can be freed
automatically when going out of scope.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Before QEMU introduced migratable CPU property, "-cpu host" included all
features that could be enabled on the host, even those which would block
migration. In other words, the default was equivalent to migratable=off.
When the migratable property was introduced, the default changed to
migratable=on. Let's record the default in domain XML.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The attribute is only allowed for host-passthrough CPUs and it can be
used to request only migratable or all supported features to be enabled
in the virtual CPU.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There's no need to set ctxt->node outside of the function. The
function can set it itself - it has all the info needed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
I think that since <qemu:commandline/> is kind of a hack, it
doesn't deserve place in the front row.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The virStateInitialize() function has ATTRIBUTE_NONNULL()
referring to @root argument (incorrectly anyway) but in
daemonRunStateInit() NULL is passed in anyway.
Then there is virCommandAddArgPair() which also has
ATTRIBUTE_NONNULL() for one of its arguments and then checks the
argument for being NULL anyways.
Signed-off-by:Bihong Yu <yubihong@huawei.com>
Reviewed-by:Chuan Zheng <zhengchuan@huawei.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit b50a8354f6 added call to qemuDomainDiskBlockJobIsSupported prior
to filling the 'disk' variable resulting in a crash when attempting a
block commit.
https://gitlab.com/libvirt/libvirt/-/issues/31
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Juan Quintela noticed that when he restarted libvirt he was getting
extra iptables rules added by libvirt even though he didn't have any
libvirt networks that used iptables rules. It turns out this also
happens if the firewalld service is restarted. The extra rules are
just the private chains, and they're sometimes being added
unnecessarily because they are added separately in a global
networkPreReloadFirewallRules() that does the init if there are any
active networks, regardless of whether or not any of those networks
will actually add rules to the host firewall.
The fix is to change the check for "any active networks" to instead
check for "any active networks that add firewall rules".
(NB: although the timing seems suspicious, this isn't a new regression
caused by the recently pushed f5418b427 (which forces recreation of
private chains when firewalld is restarted); it was an existing bug
since iptables rules were first put into private chains, even after
commit c6cbe18771 delayed creation of the private chains. The
implication is that any downstream based on v5.1.0 or later that cares
about these extraneous (but harmless) private chains would want to
backport this patch (along with the other two if they aren't already
there))
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
If virDomainUpdateDeviceFlags() was used to update an <interface>, and
the interface type changed from type='network' where the network was
an unmanaged bridge (so actualType == bridge) to type='bridge'
(i.e. actualType *also* == bridge), the update would fail due to the
perceived change in type.
In practice it is okay to switch between any interface types that end
up using a tap device, since libvirt just needs to attach the device
to a new bridge. But in this case we were erroneously rejecting it due
to a conditional that was too restrictive. This is what the code was doing:
if (old->type != new->type)
[allow update]
else
if ((oldActual == bridge and newActual == network)
|| (oldActual == network and newActual == bridge)) {
[allow update]
else
[error]
In the case described above though, old->type and new->type don't match,
but oldActual and newActual are both 'bridge', so we get an error.
This patch changes the inner conditional so that any combination of
'network' and 'bridge' for oldActual and newActual, since they both
use a tap device connected to a bridge.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The previous fix accidentally picked up a debug change that put
alignment back at 4, not 8, bytes as it claimed:
commit 37ae042642
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Wed Jun 3 11:18:23 2020 +0100
conf: force 8 byte alignment for virObjectEvent
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We need to be able to cast from virObjectEventPtr to one of
its many subclasses. Some of these subclasses have 8 byte
alignment on 32-bit platforms, but virObjectEventPtr only
has 4 byte alignment.
Previously the virObject base class had 8 byte alignment
but this dropped to 4 byte when converted to inherit from
GObject. This introduces cast alignment warnings on 32-bit:
../../src/conf/domain_event.c: In function 'virDomainEventDispatchDefaultFunc':
../../src/conf/domain_event.c:1656:30: error: cast increases required alignment of target type [-Werror=cast-align]
1656 | rtcChangeEvent = (virDomainEventRTCChangePtr)event;
| ^
../../src/conf/domain_event.c:1785:34: error: cast increases required alignment of target type [-Werror=cast-align]
1785 | balloonChangeEvent = (virDomainEventBalloonChangePtr)event;
| ^
../../src/conf/domain_event.c:1896:35: error: cast increases required alignment of target type [-Werror=cast-align]
1896 | blockThresholdEvent = (virDomainEventBlockThresholdPtr)event;
| ^
../../src/conf/domain_event.c: In function 'virDomainQemuMonitorEventDispatchFunc':
../../src/conf/domain_event.c:1974:24: error: cast increases required alignment of target type [-Werror=cast-align]
1974 | qemuMonitorEvent = (virDomainQemuMonitorEventPtr)event;
| ^
../../src/conf/domain_event.c: In function 'virDomainQemuMonitorEventFilter':
../../src/conf/domain_event.c:2179:20: error: cast increases required alignment of target type [-Werror=cast-align]
2179 | monitorEvent = (virDomainQemuMonitorEventPtr) event;
| ^
Forcing 8-byte alignment on virObjectEventPtr removes the
alignment increase during casts to subclasses.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is convenience macro, use it more. This commit was generated
using the following spatch:
@@
symbol node;
identifier old;
identifier ctxt;
type xmlNodePtr;
@@
- xmlNodePtr old;
+ VIR_XPATH_NODE_AUTORESTORE(ctxt);
...
- old = ctxt->node;
... when != old
- ctxt->node = old;
@@
symbol node;
identifier old;
identifier ctxt;
type xmlNodePtr;
@@
- xmlNodePtr old = ctxt->node;
+ VIR_XPATH_NODE_AUTORESTORE(ctxt);
... when != old
- ctxt->node = old;
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This reverts b897973f2e
Even though it may have been the case in the past, relative
XPaths don't overwrite the ctxt->node. Thus, there's no need to
save it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similar to commits 55ce656463 and 6c17606b7c in the qemu driver, make
separate copies of persistent and live device config and normalize the MAC
address between the two. This avoids having different MAC address for the
persistent and live config, ensuring the device has the same address when
the persistent config takes affect after a VM restart.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Laine Stump <laine@redhat.com>
To avoid bugs with mixing of g_object_(ref|unref) vs
virObject(Ref|Unref), we want every virObject to be
a GObject.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Memory allocated using g_object_new must never be released using
VIR_FREE/g_free because g_object_new uses a special allocation
strategy internally.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The ref count will be private to the GObject base class
and we must not peek at it, even for debugging messages.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
GObject has an arbitrary limit on the object struct size of 0xffff
bytes. It is expected that any large fields be separately allocated.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
To prepare for a conversion to GObject, we need virObjectUnref
to have the same API design as g_object_unref, which means it
needs to be void.
A few places do actually care about the return value though,
and in these cases a thread local flag is used to determine
if the dispose method was invoked.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Some, but not all, of the monitor event handlers check
the virObjectUnref return value to see if the domain
was disposed.
It should not be possible for this to happen, since
the function already holds a lock on the domain and
has only just acquired an extra reference on the
domain a few lines earlier.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Upon migration with disks, libvirt determines if each disk exists
on the destination and tries to pre-create missing ones. Well,
NVMe disks can't be pre-created, but they can be checked for
presence.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1823639
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
According to the context, here we are checking net->downscript's validity,
Signed-off-by: Liao Pingfang <liao.pingfang@zte.com.cn>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If built without attr support removing any image will trigger
qemuBlockRemoveImageMetadata (the one that emits the warning)
-> qemuSecurityMoveImageMetadata
-> virSecurityManagerMoveImageMetadata
-> virSecurityDACMoveImageMetadata
-> virSecurityDACMoveImageMetadataHelper
-> virProcessRunInFork (spawns subprocess)
-> virSecurityMoveRememberedLabel
In there due to !HAVE_LIBATTR virFileGetXAttrQuiet will return
ENOSYS and from there the chain will error out.
That is wrong and looks like:
libvirtd[6320]: internal error: child reported (status=125):
libvirtd[6320]: Unable to remove disk metadata on vm testguest from
/var/lib/uvtool/libvirt/images/testguest.qcow (disk target vda)
This change makes virSecurityDACMoveImageMetadataHelper and
virSecuritySELinuxMoveImageMetadataHelper accept that
error code gracefully and in that sense it is an extension of:
5214b2f1a3 "security: Don't skip label restore on file systems lacking XATTRs"
which does the same for other call chains into the virFile*XAttr functions.
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Support downscript for booting vm,
and hotunplug interface device.
Signed-off-by: Chen Hanxiao <chen_han_xiao@126.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The stepping range (10-11) is likely incomplete. QEMU uses 10 and the
CPUID data for Cooperlake show 11. We will update the range if needed
once more details about he CPU are available.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Commit v3.10.0-182-g237f045d9a ("qemu: Ignore fallback CPU attribute
on reconnect") forced CPU 'fallback' to ALLOW, regardless of user
choice. This fixed a situation in which guests created with older
Libvirt versions, which used CPU mode 'host-model' in runtime, would
fail to launch in a newer Libvirt if the fallback was set to FORBID.
This would lead to a scenario where the CPU was translated to 'host-model'
to 'custom', but then the FORBID setting would make the translation
process fail.
PSeries can operate with 'host-model' in runtime due to specific PPC64
mechanics regarding compatibility mode. The update() implementation of
the cpuDriverPPC64 driver is a NO-OP if CPU mode is 'host-model', and
the driver does not implement translate(). The commit mentioned above
is causing PSeries guests to get their 'fallback' setting to ALLOW,
overwriting user choice, exposing a design problem in
qemuProcessRefreshCPU() - for PSeries guests, handling 'host-model'
as it is being done does not apply.
All other cpuArchDrivers implements update() and changes guest mode
to VIR_CPU_MODE_CUSTOM, meaning that PSeries is currently the only
exception to this logic. Let's make it official.
https://bugzilla.redhat.com/show_bug.cgi?id=1660711
Suggested-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20200525123945.4049591-2-danielhb413@gmail.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The host CPU related info stored in the capabilities cache is no longer
valid after the host CPU changes. This is not a frequent situation in
real world, but it can easily happen in nested scenarios when a disk
image is started with various CPUs.
https://bugzilla.redhat.com/show_bug.cgi?id=1778819
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The purpose of this function is to give a short description that would
be change when a host CPU is replaced with a different model. This is
currently implemented by reading /proc/cpuinfo.
It should be implemented for all architectures for which the QEMU driver
stores host CPU data in the capabilities cache. In other words for archs
that support host-model CPUs.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use automatic cleanup on qemuProcessUpdateCPU and the functions called
by it.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20200522195620.3843442-5-danielhb413@gmail.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The intention of these split Load*Entry functions is to prevent
virQEMUDriverConfigLoadFile from getting too large.
There's no need to signal to the caller whether an entry was found
or not, only whether there was an error.
Remove the non-standard return 1.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
virConfGetValueString returns an allocated string that needs to be
freed.
Fixes: 34a59fb570
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
qemuxml2argv test suite is way more comprehensive than the hotplug
suite. Since we share the code paths for monitor and command line
hotplug we can easily test the properties of devices against the QAPI
schema.
To achieve this we'll need to skip the JSON->commandline conversion for
the test run so that we can analyze the pure properties. This patch adds
flags for the comand line generator and hook them into the
JSON->commandline convertor for -netdev. An upcoming patch will make use
of this new infrastructure.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Now that all code paths generate JSON props we can remove the conversion
to command line arguments and back in the monitor code.
Note that the test which is removed in this commit will be replaced by a
stronger testsuite later.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Syntax of guestfwd channel also needs to be modified to conform to the
QAPI schema.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
QEMU models guestfwd as:
'guestfwd': [
{ "str": "tcp:10.0.2.1:4600-chardev:charchannel0" },
{ "str": "...."},
]
but the command line as:
guestfwd=tcp:10.0.2.1:4600-chardev:charchannel0,guestfwd=...
I guess the original idea was to make it extensible while not worrying
about adding another object for it. Either way it requires us to add yet
another JSON->cmdline convertor for arrays.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The 'netdev_add' command was recently formally described in qemu via the
QMP schema. This means that it also requires the arguments to be
properly formatted. Our current approach is to generate the command line
and then use qemuMonitorJSONKeywordStringToJSON to get the JSON
properties for the monitor. This will not work if we need to pass some
fields as numbers or booleans.
In this step we re-do internals of qemuBuildHostNetStr to format a JSON
object which is converted back via virQEMUBuildNetdevCommandlineFromJSON
to the equivalent command line. This will later allow fixing of the
monitor code to use the JSON object directly rather than rely on the
conversion.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
In preparation for converting the generator of -netdev to generate JSON
which will be used to do the command line rather than the other way
around we need to introduce a convertor which properly configures
virQEMUBuildCommandLineJSON for the quirks of -netdev.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Use automatic pointer cleanup for virJSONValuePtrs to get rid of the
cleanup label and ret variable.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Add a variant similar to virJSONValueObjectAppendString which also
formats more complex value strings with printf syntax.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The helper returns a list of arguments of a virCommand. This will be
useful in tests where we'll inspect certain already formatted arguments.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
In some cases we use 'on/off' for command line arguments. Add a switch
which will select the preferred spelling for a specific usage.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Allow reusing this for formatting of netdev_add arguments into -netdev.
We need to be able to skip the 'type' property as it's used without the
prefix by our generator.
Add infrastructure which allows skipping property with a specific name.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
In qemu the argument of 'ipv6-net' is split up into 'ipv6-prefix' and
'ipv6-prefixlen'. Additionally now that 'netdev_add' was qapified, only
the real properties are allowed. Switch to using them explicitly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The output of the function is fed as argument to '-device' command line
argument or 'device_add' monitor command except for 'guestfwd' channels
where it needs to be fed to -netdev/netdev_add. This is confusing and
error prone. Split it up since the caller needs to know which
command/option to use anyways, so the caller can call the appropriate
function without any magic.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Both active branches create the same backend chardev. Since there is no
other case, extract it before the switch so that we don't have to
duplicate it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
'tftp' storage protocol was supported by qemu until 2.7.0. Add an
interlock when blockdev is used and drop the test case for it as it's
IMO not worth adding another test file just for that.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The qemu.conf change broke our augeas test:
qemu/test_libvirtd_qemu.aug:96.3-203.1:exception thrown in test
qemu/test_libvirtd_qemu.aug:96.8-.34:exception: Iterated lens matched less than it should
Lens: ../../src/qemu/libvirtd_qemu.aug:170.13-.43:
Last match: ../../src/qemu/libvirtd_qemu.aug:18.52-.113:
Not matching: ../../src/qemu/libvirtd_qemu.aug:12.19-.31:
Error encountered at 48:27 (1615 characters into string)
<\n "/dev/ptmx", "/dev/kvm"|=|,\n]\nsave_image_format = "raw>
Fixes: ab5ba57012
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The RTC and HPET modes for the QEMU emulation tick have been dropped
almost 9 years ago, in commit 25f3151ece1d5881826232bebccc21b588d4e03e.
Do not allow them in the devices cgroup policy.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Although the original patches to support controllers with
hotplug='off' were checking during hotplug/attach requests that the
device was being plugged into a PCI controller that didn't have
hotplug disabled, but I forgot to do the same for device detach (the
main impetus for adding the feature was to prevent unplugs originating
from within the guest, so it slipped my mind). So although the guest
OS was ultimately unable to honor the unplug request, libvirt could
still be used to make such a request, and since device attach/detach
are asynchronous operations, the caller to libvirt would receive a
success status back (the device would stubbornly/correctly remain in
the domain status XML however)
This patch remedies that, by looking at the controller for the device
in the detach request, and immediately failing the operation if that
controller has hotplug=off.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
If the mirror destination is not a file but a NVMe disk, then
call qemuHostdevReAttachOneNVMeDisk() to reattach the NVMe back
to the host.
This would be done by blockjob code when the job finishes, but in
this case the job won't finish - QEMU is killed meanwhile.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1825785
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In v5.10.0-rc1~42 (which was later fixed in v6.0.0-rc1~487) I am
removing XATTRs for a file that QEMU is mirroring a disk into but
it is killed meanwhile. Well, we can call
qemuSecurityRestoreImageLabel() which will not only remove XATTRs
but also use them to restore the original owner of the file.
This would be done by blockjob code when the job finishes, but in
this case the job won't finish - QEMU is killed meanwhile
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Use g_new0 to allocate and remove NULL checks from callers
and the lock will release properly
Signed-off-by: Yi Li <yili@winhong.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In previous commit we started tracking whether QEMU supports
'-numa mem='. This is tied to the machine type because migration
from '-numa mem=' to '-numa memdev' is impossible (or vice
versa). But since it's tied to a machine type (where migration
from one to another is also unsupported) we can allow QEMU to get
rid of the deprecated command line.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1783355
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When building -numa command line there is a for() loop that
builds '-numa memdev=' for each guest NUMA node. And also
records in a local variable whether any of memory-object-*
backends must be used to satisfy desired config. Well, instead of
checking in each iteration whether corresponding capabilities are
set, we can do swap if() and for() and check only once.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There is 'numa-mem-supported' machine attribute which specifies
whether '-numa mem=' is supported. Store it in our capabilities
as it will be used in later commits when building the command
line.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The AppArmor secdriver does not use labels to grant access to
resources. Therefore, it doesn't use XATTRs and hence it lacks
implementation of .domainMoveImageMetadata callback. This leads
to a harmless but needless error message appearing in the logs:
virSecurityManagerMoveImageMetadata:476 : this function is not
supported by the connection driver: virSecurityManagerMoveImageMetadata
Closes: https://gitlab.com/libvirt/libvirt/-/issues/25
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The documented enum and its values do not exits. The real enum has
slightly different name.
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Introduce vendors and some commonly used models
for ARM arch, these will be used for virConnectionGetCapabilities
for ARM CPUs.
Signed-off-by: Zhenyu Zheng <zheng.zhenyu@outlook.com>
Message-Id: <TY2PR01MB3113973DDB36C7A5E18F451299BF0@TY2PR01MB3113.jpnprd01.prod.outlook.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Introduce getHost support for ARM CPU driver,
read CPU vendor_id, part_id and flags from
registers directly. These codes will only be
compiled on aarch64 hardware.
Signed-off-by: Zhenyu Zheng <zheng.zhenyu@outlook.com>
Message-Id: <TY2PR01MB311380AFE294266B4E87B85699BF0@TY2PR01MB3113.jpnprd01.prod.outlook.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Add helper functions to parse vendor and model for
ARM CPUs, and use them as callbacks when load cpu
maps.
Signed-off-by: Zhenyu Zheng <zheng.zhenyu@outlook.com>
Message-Id: <TY2PR01MB3113C158B8C2822E75DB5EAE99BF0@TY2PR01MB3113.jpnprd01.prod.outlook.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Introduce virCPUarmData to virCPUData and related
structs to cpu_arm.c for ARM cpus.
Signed-off-by: Zhenyu Zheng <zheng.zhenyu@outlook.com>
Message-Id: <TY2PR01MB31130D12A95144FF88C1E32499BF0@TY2PR01MB3113.jpnprd01.prod.outlook.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The structure is not specific to x86 and thus its cleanup function
should be defined in cpu.h and be available to all users.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
==179663== 35 (24 direct, 11 indirect) bytes in 1 blocks are definitely lost in loss record 205 of 461
==179663== at 0x4839EC6: calloc (vg_replace_malloc.c:762)
==179663== by 0x5791AC0: g_malloc0 (in /usr/lib64/libglib-2.0.so.0.6400.1)
==179663== by 0x190C79: qemuDomainObjPrivateXMLParseBlockjobDataCommit (qemu_domain.c:3295)
==179663== by 0x190DF7: qemuDomainObjPrivateXMLParseBlockjobDataSpecific (qemu_domain.c:3331)
==179663== by 0x19157D: qemuDomainObjPrivateXMLParseBlockjobData (qemu_domain.c:3469)
==179663== by 0x1918E8: qemuDomainObjPrivateXMLParseBlockjobs (qemu_domain.c:3498)
==179663== by 0x193841: qemuDomainObjPrivateXMLParse (qemu_domain.c:3944)
==179663== by 0x4A1BA9D: virDomainObjParseXML (domain_conf.c:22306)
==179663== by 0x4A1BFE9: virDomainObjParseNode (domain_conf.c:22429)
==179663== by 0x4A1C0B4: virDomainObjParseFile (domain_conf.c:22443)
==179663== by 0x1431E1: testCompareStatusXMLToXMLFiles (qemuxml2xmltest.c:61)
==179663== by 0x177722: virTestRun (testutils.c:142)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
==156803== 58 (40 direct, 18 indirect) bytes in 1 blocks are definitely lost in loss record 306 of 463
==156803== at 0x4839EC6: calloc (vg_replace_malloc.c:762)
==156803== by 0x5791AC0: g_malloc0 (in /usr/lib64/libglib-2.0.so.0.6400.1)
==156803== by 0x48F60DC: virAlloc (viralloc.c:48)
==156803== by 0x18DD74: qemuStorageSourcePrivateDataAssignSecinfo (qemu_domain.c:2384)
==156803== by 0x18DFD5: qemuStorageSourcePrivateDataParse (qemu_domain.c:2433)
==156803== by 0x49EC884: virDomainStorageSourceParse (domain_conf.c:9857)
==156803== by 0x49ECBA3: virDomainDiskBackingStoreParse (domain_conf.c:9909)
==156803== by 0x49F129D: virDomainDiskDefParseXML (domain_conf.c:10785)
==156803== by 0x4A1804E: virDomainDefParseXML (domain_conf.c:21543)
==156803== by 0x4A1B60C: virDomainObjParseXML (domain_conf.c:22254)
==156803== by 0x4A1BFE9: virDomainObjParseNode (domain_conf.c:22429)
==156803== by 0x4A1C0B4: virDomainObjParseFile (domain_conf.c:22443
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
A failure in qemuProcessLaunch would lead to qemuExtDevicesStop
being called twice - once in the cleanup section and then again
in qemuProcessStop.
However, the first one is called while the QEMU process is
still running, which is too soon for the swtpm process, because
the swtmp_ioctl command can lock up:
https://bugzilla.redhat.com/show_bug.cgi?id=1822523
Remove the first call and only leave the one in qemuProcessStop,
which is called after the QEMU process is killed.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The @tmpIfname is a pointer into a const string. To avoid
mistakenly changing the const string via the pointer, make the
pointer const too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
