Setup the VDPA bits of the appropriate part of the image chain for block
copy.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The code which opens the VDPA device and prepares it for FD passing was
not called in the hotplug code path, preventing hotplug of VDPA disks
with:
error: internal error: argument key 'path' must not have null value
Use the new helper qemuProcessPrepareHostStorageDisk to setup the VDPA
definition.
Closes: https://gitlab.com/libvirt/libvirt/-/issues/539
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Currently the code sets up only VDPA backends but will be used later in
hotplug code too.
This patch also uses normal forward iteration in the loop in
qemuProcessPrepareHostStorage as we don't need to remove disks from the
disk list at that point.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the docs for the <acpi><table> element under a common section as
it's not specific for direct kernel boot. In fact the original use was
for Windows activation.
Fixes: 72f652da63
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Legacy mode used to be needed for use with -drive, which was almost
completely deleted. We now have qemuxml2argvtest test cases checking a
few cases and the rest uses the modern mode only. Thus we don't need to
test the legacy mode any more.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Condition handling failure of the first virTestRun was lacking the 'ret
= -1' line thus the subsequent line was taken as it's body rendering the
first invocation useless.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU deprecated and removed support for those protocols, but due to a
logic bug in the tests it was not caught. Remove the test cases first.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Update to v8.1.0-2161-ga95260486a
Notable changes:
- new CPU topology parameters: 'books', 'drawers'
- new migration parameter 'avail-switchover-bandwidth'
- new s390x CPU properties: 'dedicated', 'entitlement'
- new 'hostmem' parameter for 'virtio-gpu'
- new device 'piix4-isa'
- new property 'dynamic-memslots' of 'virtio-mem' device
- new 'gsi*' parameters of 'ICH9-LPC'
- new experimental 'x-south-bridge' machine option
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Given that this variable now controls not just whether C tests
are built, but also whether any test at all is executed, the new
name is more appropriate.
Update the description for the corresponding meson option
accordingly.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Currently, passing -Dtests=disabled only disables a subset of
tests: those that are written in C and thus require compilation.
Other tests, such as the syntax-check ones and those that are
implemented as scripts, are always enabled.
There's a potentially dangerous consequence of this behavior:
when tests are disabled, 'meson test' will succeed as if they
had been enabled. No indication of this will be shown, so the
user will likely make the reasonable assumption that everything
is fine when in fact the significantly reduced coverage might
be hiding failures.
To solve this issues, disable *all* tests when asked to do so,
and inject an intentionally failing test to ensure that 'meson
test' doesn't succeed.
Best viewed with 'git show -w'.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
It only makes sense to enable expensive tests when tests are
enabled. Disallow invalid configurations.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
There are some cases in which we automatically disable tests when
using Clang as the compiler. If the user has explicitly asked for
tests to be enabled, however, we should error out instead of
silently disabling things.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
This will make future patches nicer.
Note that we need to handle these somewhat late because of the
dependency on information about the compiler and the flags it
supports.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
As explained in the comment, the syntax-check machinery uses git
to figure out the list of files it should operate on, so we can
only enable it when building from git.
Despite only registering the various tests with meson in that
case, however, we unconditionally perform a bunch of preparation
that is only useful for the purpose of registering and running
the tests. If we're not going to do that, we can skip a few steps
and save a bit of time.
Best viewed with 'git show -w'.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Clang can be too aggressive at optimizations, which can end up
breaking our test suite. See f9f5ab5718 for details.
As a result of this, since 7944700b40 we are automatically
disabling tests when Clang is used unless it supports the
-fsemantic-interposition compiler flag.
Since the version of Clang included in macOS doesn't support that
compiler flag, we end up always disabling the test suite on that
platform.
This is already far from ideal, considering that it was just last
year when we finally managed to get the test suite to successfully
pass on macOS, and it would be a real shame if the situation
regressed again.
With the upcoming changes, which will turn running 'meson test'
into a hard failure if tests are disabled, this behavior will
result in every single pipeline failing.
Work around the problem the only way we can: disabling
optimizations entirely for the macOS CI jobs.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Test cases that depend on duplicating fds are using fairly big
values as targets.
This works fine on Linux, where RLIMIT_NOFILE is 1024 by
default, but fails on macOS which uses 256 as the default.
Decrease the values so that they're valid across all platforms.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Both tests pass a disk source definition which didn't go through the
preparation steps and thus contains only the target information that
were originally present, thus we should be using the
QEMU_BLOCK_STORAGE_SOURCE_BACKEND_PROPS_TARGET_ONLY flag.
For the same reason QEMU_BLOCK_STORAGE_SOURCE_BACKEND_PROPS_AUTO_READONLY
used in 'testJSONtoJSON' doesn't make sense.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Return whether a relevant cachemode was presented rather than returning
an error, so that callers can be simplified. Use the proper enum type as
argument rather than typecasting in the switch statement.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The aforementioned fields in virStorageSource struct are copies of the
disk properties, but were not converted to the proper type yet.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Certain disk config fields are mirrored between the disk and storage
source definitions, but the proper types are not available for use in
the virStorageSource definition. Move them so they can be used properly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Formatting of the 'nbdkit' driven backend breaks out of the switch
statement so we don't need to have an unnecessary block and indentation
level for the case when nbdkit is not in use.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'qemuBuildDriveSourceStr' used to build the legacy -drive commandline
for SD cards is the only user of qemuDiskSourceGetProps. Move the helper
directly inline.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'auto-read-only' blockdev option is available in all supported qemu
versions so we can remove the migration hack which disabled it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a few examples of SD cards backed with network storage to capture
the current state as the formatter code is about to be refactored.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The situation is the same as Linux: since glibc no
longer includes the RPC functionality, libtirpc must
be used to complement it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We want at least one file to always be present, so that it can
serve as a pointer for users. Ensure that this is the case by
unconditionally using the value of the respective keys.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It's somewhat confusing that some of the services have a
corresponding foo.service.extra.in and foo.socket.extra.in, some
have just one of the two, and some have neither.
In order to make things more approachable, make sure that both
files exists for each service.
In most cases the extra units are currently unused, so they will
just contain a comment briefly explaining their purpose and
pointing users to meson.build, where they can find more
information. The same comment is also added to the top of
extra units that already have some contents in them for
consistency.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Currently the script will reject any type of contents outside
of a section, but we want to be able to have some useful
comments at the top of each file to help users understand how
they are processed.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that the underlying script is able to merge an arbitrary
number of units into the base template, expose this possibility
in the build system.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In order to further deduplicate the contents of the various unit
files, we need to be able to merge multiple additional units
into the initial one.
Luckily the merge logic is in no way constrained to working with
just two units, so achieving this is pretty much just a matter
of lifting the existing limitation on the number of arguments
that the script accepts.
As a special case, it's now also possible to call the script
with just the base unit as argument. No merging will be performed
in that case, obviously, but we'll still go through the basic
validation and cleanup steps.
This also fixes a bug in the check for the number of arguments:
sys.argv also contains the name of the script, so we should have
checked that its size was at least 3. The check is now written in
a way that's less prone to misunderstandings.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It uses custom templates which already hardcode the correct
value.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When starting a guest via libvirt (`virsh create --console`), early
console output was missed because the guest was started first and then
the console was attached. This patch changes this to the following
sequence:
1. create a paused transient guest
2. attach the console
3. resume the guest
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When starting a guest via libvirt (`virsh start --console`), early
console output was missed because the guest was started first and then
the console was attached. This patch changes this to the following
sequence:
1. create a paused guest
2. attach the console
3. resume the guest
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch adds the command line flag `--resume` to the `virsh console`
command. This resumes a paused guest after connecting to the console.
This might be handy since it's a "common" pattern to start a guest
paused, connect to the console, and then resume it so as not to miss any
console messages.
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
commit v9.8.0-40-g7cbd8c4230 changed the name of the option that
enables/disables nbdkit support in the build from "libnbd" to
"nbdkit", but one use of "libnbd=disabled" was missed in
libvirt.specfile.in - the meson commandline for mingw.
This patch changes that line to "-Dnbdkit=disabled", thus unbreaking
the rpm build.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/550
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Starting v18, cloud-hypervisor supports serial and console devices in
parallel. Drop related check based on ch version.
Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Starting with v28.0 cloud-hypervisor requires the use of "payload" api to pass
kernel, initramfs and cmdline options. Extend ch driver to use the new
api based on ch version.
Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The function virHostCPUGetPhysAddrSize was introduced with commit be1b7d5b18
fails on architectures other than x86 and SuperH. The commit 8417c1394c
fixed the issue only for s390 but the problem is still seen on other
architectures like ppc which does not report Physical address size in their
cpuinfo output.
command:
systemctl restart libvirtd.service
Output :
<snip>
dnsmasq[2377]: read /var/lib/libvirt/dnsmasq/default.addnhosts - 0
addresses
dnsmasq-dhcp[2377]: read /var/lib/libvirt/dnsmasq/default.hostsfile
libvirtd[3163]: libvirt version: 9.8.0
libvirtd[3163]: hostname: xxxxxxxxxx
libvirtd[3163]: internal error: Missing or invalid CPU address size in
/proc/cpuinfo
libvirtd.service: Deactivated successfully.
</snip>
This patch fixes this issue by returning the size=0 for architectures
other than x86 and SuperH.
Signed-off-by: Narayana Murty N <nnmlinux@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
vmDef->fss[i]->src->path may be NULL,
so check is needed before passing it to VIR_DEBUG.
Also removed checking vmDef->fss[i]->src for NULL, since it may not be NULL.
Fixes: 57487085dc ("lxc: don't try to reference NULL when mounting filesystems")
Signed-off-by: Dmitry Frolov <frolov@swemel.ru>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Currently, libvirt doesn't send events when devices are attached,
detached or updated. Thus, any services that listen to events are
unaware of the change to persistent config.
Signed-off-by: Fima Shevrin <efim.shevrin@virtuozzo.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
