With the advent of VIR_PCI_CONNECT_AGGREGATE_SLOT, the new name is
more appropriate, since the address returned may be another address
on the same slot as last time, not necessarily a new slot.
fromConfig should be true if the caller wants
virDomainPCIAddressValidate() to loosen restrictions on its
interpretation of the pciConnectFlags. In particular, either
PCI_DEVICE or PCIE_DEVICE will be counted as equivalent to both, and
HOTPLUG will be ignored. In a few cases where libvirt was manually
overriding automatic address assignment, it was setting fromConfig to
false when validating the hardcoded manual override. This patch
changes those to fromConfig=true as a preemptive strike against any
future bugs that might otherwise surface.
Although setting virDomainPCIAddressReserveAddr()'s fromConfig=true is
correct when a PCI addres is coming from a domain's config, the *true*
purpose of the fromConfig argument is to lower restrictions on what
kind of device can plug into what kind of controller - if fromConfig
is true, then a PCIE_DEVICE can plug into a slot that is marked as
only compatible with PCI_DEVICE (and vice versa), and the HOTPLUG flag
is ignored.
For a long time there have been several calls to
virDomainPCIAddressReserveAddr() that have fromConfig incorrectly set
to false - it's correct that the addresses aren't coming from user
config, but they are coming from hardcoded exceptions in libvirt that
should, if anything, pay *even less* attention to following the
pciConnectFlags (under the assumption that the libvirt programmer knew
what they were doing).
See commit b87703cf7 for an example of an actual bug caused by the
incorrect setting of the "fromConfig" argument to
virDomainPCIAddressReserveAddr(). Although they haven't resulted in
any reported bugs, this patch corrects all the other incorrect
settings of fromConfig in calls to virDomainPCIAddressReserveAddr().
Set the VIR_PCI_CONNECT_AGGREGATE_SLOT flag for pcie-root-ports so
that they will be assigned to all the functions on a slot.
Some qemu test case outputs had to be adjusted due to the
pcie-root-ports now being put on multiple functions.
If a PCI device has VIR_PCI_CONNECT_AGGREGATE_SLOT set in its
pciConnectFlags, then during address assignment we allow multiple
instances of this type of device to be auto-assigned to multiple
functions on the same device. A slot is used for aggregating multiple
devices only if the first device assigned to that slot had
VIR_PCI_CONNECT_AGGREGATE_SLOT set. but any device types that have
AGGREGATE_SLOT set might be mix/matched on the same slot.
(NB: libvirt should never set the AGGREGATE_SLOT flag for a device
type that might need to be hotplugged. Currently it is only planned
for pcie-root-port and possibly other PCI controller types, and none
of those are hotpluggable anyway)
There aren't yet any devices that use this flag. That will be in a
later patch.
If there are multiple devices assigned to the different functions of a
single PCI slot, they will not work properly if the device at function
0 doesn't have its "multi" attribute turned on, so it makes sense for
libvirt to turn it on during PCI address assignment. Setting multi
then assures that the new setting is stored in the config (so it will
be used next time the domain is started), preventing any potential
problems in the case that a future change in the configuration
eliminates the devices on all non-0 functions (multi will still be set
for function 0 even though it is the only function in use on the slot,
which has no useful purpose, but also doesn't cause any problems).
(NB: If we were to instead just decide on the setting for
multifunction at runtime, a later removal of the non-0 functions of a
slot would result in a silent change in the guest ABI for the
remaining device on function 0 (although it may seem like an
inconsequential guest ABI change, it *is* a guest ABI change to turn
off the multi bit).)
This utility function iterates through all devices looking for any
with a PCI address that has function != 0 (which implies that multiple
functions are in use on that slot), then uses an inner iterator to
find the device that's on function 0 of that same slot and sets the
"multi" in its virDomainDeviceInfo (as long as it hasn't already been
set explicitly by someone who presumably has better information than
we do).
It isn't yet called from anywhere, so will have no functional effect.
There is a very slight time advantage to beginning the search for the
next unused PCI address at the slot *after* the previous find (which
is now used), but if we do that, we will miss allocating the other
functions of the same slot (when we implement a
VIR_PCI_CONNECT_AGGREGATE_SLOT flag to support that).
virDomainPCIAddressGetNextSlot() starts searching from the last
allocated address and goes to the end of all the buses, then goes back
to the first bus and searches from there up to the starting point (in
case any address has been freed since the last time an address was
allocated. The loops for these two are almost, but not exactly, the
same, so they have remained as separate loops with the same code
inside the loop. To lessen maintenance headaches, the identical code
has been moved out into the function
virDomainPCIAddressFindUnusedFunctionOnBus(), which is called in place
of the loop contents.
setting reserveEntireSlot really accomplishes nothing - instead of
going to the trouble of computing the value for reserveEntireSlot and
then possibly setting *all* functions of the slot as in-use, we can
just set the in-use bit only for the specific function being used by a
device. Later we will know from the context (the PCI connect flags,
and whether we are reserving a specific address or asking for "the
next available") whether or not it is okay to allocate other functions
on the same slot.
Although it's not used yet, we allow specifying "-1" for the function
number when looking for the "next available slot" - this is going to
end up meaning "return the lowest available function in the slot, but
since we currently only provide a function from an otherwise unused
slot, "-1" ends up meaning "0".
When keeping track of which functions of which slots are allocated, we
will need to have more information than just the current bitmap with a
bit for each function that is currently stored for each slot in a
virDomainPCIAddressBus. To prepare for adding more per-slot info, this
patch changes "uint8_t slots" into "virDomainPCIAddressSlot slot", which
currently has a single member named "functions" that serves the same
purpose previously served directly by "slots".
libxl doesn't provide a way to write one log for each domain. Thus
we need to demux the messages. If our logger doesn't know to which
domain to attribute a message, then it will write it to the default
log file.
Starting with Xen 4.9 (commit f9858025 and following), libxl will
write the domain ID in an easy to grab manner. The logger introduced
by this commit will use it to demux the libxl log messages.
Thanks to the default log file, this logger will also work with older
versions of Xen.
* remove _vboxIID_v2_x and _vboxIID_v3_x structs and repalce with one
_vboxIID as all supprted vbox versions have the same IID structure.
* remove vboxIIDUnion that was used to abstract version depended IID
differences.
* remove IID_MEMBER macro and use the new vboxIID directly.
This function was not implemented for vbox 5+ which removed
TakeScreenShotPNGToArray but provides TakeScreenShotToArray with
BitmapFormat_PNG argument which is the same thing.
The IVRDxServer was used because vbox < 4 used to have IVRDPServer
whereas vbox >= 4 has IVRDEServer. Now that support for legacy
versions is being removed, we can use IVRDEServer.
* removed oldMediumInterface flag and related code that was used for
vbox 2.x
* remove accelerate2DVideo and networkRemoveInterface flags which were
also conditionals for handling legacy vbox versions.
* the getMachineForSession is always true for 4.0+. This also means that
checkflag argument in openSessionForMachine no longer has any meaning
because it was or'ed with getMachineForSession (always true)
* remove supportScreenshot flag - vbox 4.0+ supports it
* remove detachDevicesExplicitly flag only relevant for < 4.0
VirtualBox 4.0+ uses IMedium and IHardDisk is no longer used, so
* remove typef IMedium IHardDisk
* merge UIHardDisk into UIMedium
* update all references accordingly
This removes most of the code wrapped in VBOX_API_VERSION < 4000000
preprocessor checks. Those are the ones that can be safely removed
without needing to update driver code to accomodate it.
* delete SDK header files for vbox older than 4.0
* delete .c files for vbox older than 4.0
* update vbox_XPCOMCGlue to use oldest supported header file, that is 4.0
going forward.
* remove deleted files from Makefile.am
There are still some systems out there that have broken
setfilecon*() prototypes. Instead of taking 'const char *tcon' it
is taking 'char *tcon'. The function should just set the context,
not modify it.
We had been bitten with this problem before which resulted in
292d3f2d and subsequently b109c09765. However, with one my latest
commits (4674fc6afd) I've changed the type of @tcon variable to
'const char *' which results in build failure on the systems from
above.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This function is used only from code compiled on Linux. Therefore
on non-Linux platforms it triggers compilation error:
../../src/qemu/qemu_domain.c:209:1: error: unused function 'qemuDomainGetPreservedMounts' [-Werror,-Wunused-function]
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
For the blockjobs, where libvirt is able to track the state internally
we can fix locking of images we can remove the appropriate locks.
Also when doing a pivoting operation we should not acquire the lock on
any of those images since both are actually locked already.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1302168
Images that became the backing chain of the current image due to the
snapshot need to be unlocked in the lock manager. Also if qemu was
paused during the snapshot the current top level images need to be
released until qemu is resumed so that they can be acquired properly.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1191901
The code at first changed the definition and then rolled it back in case
of failure. This was ridiculous. Refactor the code so that the image in
the definition is changed only when the snapshot is successful.
The refactor will also simplify further fix of image locking when doing
snapshots.
Libvirt is able to properly model what happens to the backing chain
after a snapshot so there's no real need to redetect the data.
Additionally with the _REUSE_EXT flag this might end up in redetecting
wrong data if the user puts wrong backing chain reference into the
snapshot image.
Commit id 'a48c674f' caused problems for systems without PARTED installed.
So move the PARTED probing code back to storage_backend_disk.c and create
a shim within storage_backend.c to call it if WITH_STORAGE_DISK is true;
otherwise, just return -1 with the error.
At startup time, rather than blindly trusting the target devices are
still properly formatted, let's check to make sure the pool's target
devices are all properly formatted before attempting to start the pool.
Signed-off-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1373711
Add support and documentation for the [NO_]OVERWRITE flags for the
logical backend.
Update virsh.pod with a description of the process for usage of
the flags and building of the pool's volume group.
Signed-off-by: John Ferlan <jferlan@redhat.com>
If the build fails, then we need to ensure that we've run pvremove
on any devices which we've run pvcreate on; otherwise, a subsequent
build could fail since running pvcreate twice on a device requires
special force arguments.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Currently as long as the disk is formatted using a known parted format
type, the algorithm is happy to continue. However, that leaves a scenario
whereby a disk formatted using "pc98" could be used by a pool that's defined
using "dvh" (or vice versa). Alter the check to be match and different
and adjust the caller.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than have the Disk code having to use PARTED to determine if
there's something on the device, let's use the virStorageBackendDeviceProbe.
and only fallback to the PARTED probing if the BLKID code isn't built in.
This will also provide a mechanism for the other current caller (File
System Backend) to utilize a PARTED parsing algorithm in the event that
BLKID isn't built in to at least see if *something* exists on the disk
before blindly trying to use. The PARTED error checking will not find
file system types, but if there is a partition table set on the device,
it will at least cause a failure.
Move virStorageBackendDiskValidLabel and virStorageBackendDiskFindLabel
to storage_backend and rename/rework the code to fit the new model.
Update the virsh.pod description to provide a more generic description
of the process since we could now use either blkid or parted to find
data on the target device.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Prior to starting up, let's be sure the target volume device is
formatted as we expect; otherwise, inhibit the start.
Signed-off-by: John Ferlan <jferlan@redhat.com>
It's possible that the API could be called from a startup path in
order to check whether the label on the device matches what our
format is. In order to handle that condition, add a 'writelabel'
boolean to the API in order to indicate whether a write or just
read is about to happen.
This alters two "error" conditions that would care about knowing.
Signed-off-by: John Ferlan <jferlan@redhat.com>
A device may be formatted using some sort of disk partition format type.
We can check that using the blkid_ API's as well - so alter the logic to
allow checking the device for both a filesystem and a disk partition.
Signed-off-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1363586
Commit id '27758859' introduced the "NO_OVERWRITE" flag check for
file system backends; however, the implementation, documentation,
and algorithm was inconsistent. For the "flag" description for the
API the flag was described as "Do not overwrite existing pool";
however, within the storage backend code the flag is described
as "it probes to determine if filesystem already exists on the
target device, renurning an error if exists".
The code itself was implemented using the paradigm to set up the
superblock probe by creating a filter that would cause the code
to only search for the provided format type. If that type wasn't
found, then the algorithm would return success allowing the caller
to format the device. If the format type already existed on the
device, then the code would fail indicating that the a filesystem
of the same type existed on the device.
The result is that if someone had a file system of one type on the
device, it was possible to overwrite it if a different format type
was specified in updated XML effectively trashing whatever was on
the device already.
This patch alters what NO_OVERWRITE does for a file system backend
to be more realistic and consistent with what should be expected when
the caller requests to not overwrite the data on the disk.
Rather than filter results based on the expected format type, the
code will allow success/failure be determined solely on whether the
blkid_do_probe calls finds some known format on the device. This
adjustment also allows removal of the virStoragePoolProbeResult
enum that was under utilized.
If it does find a formatted file system different errors will be
generated indicating a file system of a specific type already exists
or a file system of some other type already exists.
In the original virsh support commit id 'ddcd5674', the description
for '--no-overwrite' within the 'pool-build' command help output
has an ambiguous "of this type" included in the short description.
Compared to the longer description within the "Build a given pool."
section of the virsh.pod file it's more apparent that the meaning
of this flag would cause failure if a probe of the target already
has a filesystem.
So this patch also modifies the short description to just be the
antecedent of the 'overwrite' flag, which matches the API description.
This patch also modifies the grammar in virsh.pod for no-overwrite
as well as reworking the paragraph formats to make it easier to read.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rename virStorageBackendFileSystemProbe and to virStorageBackendBLKIDFindFS
and move to the more common storage_backend module.
Create a shim virStorageBackendDeviceIsEmpty which will make the call
to the virStorageBackendBLKIDFindFS and check the return value.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Again, there is no need to create /var/lib/libvirt/$domain.*
directories in CreateNamespace(). It is sufficient to create them
as soon as we need them which is in BuildNamespace. This way we
don't leave them around for the whole lifetime of domain.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The c1140eb9e got me thinking. We don't want to special case /dev
in qemuDomainGetPreservedMounts(), but in all other places in the
code we special case it anyway. I mean,
/var/run/libvirt/$domain.dev path is constructed separately just
so that it is not constructed here. It makes only a little sense
(if any at all).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If something goes wrong in this function we try a rollback. That
is unlink all the directories we created earlier. For some weird
reason unlink() was called instead of rmdir().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
So far if qemu is spawned under separate mount namespace in order
to relabel everything it needs an access to the security driver
to run in that namespace too. This has a very nasty down side -
it is being run in a separate process, so any internal state
transition is NOT reflected in the daemon. This can lead to many
sleepless nights. Therefore, use the transaction APIs so that
libvirt developers can sleep tight again.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
With our new qemu namespace code in place, the relabelling of
devices is done not as good is it could: a child process is
spawned, it enters the mount namespace of the qemu process and
then runs desired API of the security driver.
Problem with this approach is that internal state transition of
the security driver done in the child process is not reflected in
the parent process. While currently it wouldn't matter that much,
it is fairly easy to forget about that. We should take the extra
step now while this limitation is still fresh in our minds.
Three new APIs are introduced here:
virSecurityManagerTransactionStart()
virSecurityManagerTransactionCommit()
virSecurityManagerTransactionAbort()
The Start() is going to be used to let security driver know that
we are starting a new transaction. During a transaction no
security labels are actually touched, but rather recorded and
only at Commit() phase they are actually updated. Should
something go wrong Abort() aborts the transaction freeing up all
memory allocated by transaction.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The code at the very bottom of the DAC secdriver that calls
chown() should be fine with read-only data. If something needs to
be prepared it should have been done beforehand.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
virtio-pci is the way forward for aarch64 guests: it's faster
and less alien to people coming from other architectures.
Now that guest support is finally getting there (Fedora 24,
CentOS 7.3, Ubuntu 16.04 and Debian testing all support
virtio-pci out of the box), we'd like to start using it by
default instead of virtio-mmio.
Users and applications can already opt-in by explicitly using
<address type='pci'/>
inside the relevant elements, but that's kind of cumbersome and
requires all users and management applications to adapt, which
we'd really like to avoid.
What we can do instead is use virtio-mmio only if the guest
already has at least one virtio-mmio device, and use virtio-pci
in all other situations.
That means existing virtio-mmio guests will keep using the old
addressing scheme, and new guests will automatically be created
using virtio-pci instead. Users can still override the default
in either direction.
Existing tests such as aarch64-aavmf-virtio-mmio and
aarch64-virtio-pci-default already cover all possible
scenarios, so no additions to the test suites are necessary.
When coldplugging vcpus to a VM that already has a few hotpluggable
vcpus the code might generate invalid configuration as
non-hotpluggable cpus need to be clustered starting from vcpu 0.
This fix forces the added vcpus to be hotpluggable in such case.
Fixes a corner case described in:
https://bugzilla.redhat.com/show_bug.cgi?id=1370357
This patch adds support and documentation for
a generalized hardware cache event called cache_l1d
perf event.
Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
The public virSecret object has a single "usage_id" field
but the virSecretDef object has a different 'char *' field
for each usage type, but the code all assumes every usage
type has a corresponding single string. Get rid of the
pointless union in virSecretDef and just use "usage_id"
everywhere. This doesn't impact public XML format, only
the internal handling.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The handler for the device removal failed event was using
the struct for the device added event. Fortunately the
layout was the same, so this was harmless.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When changing the metadata via virDomainSetMetadata, we now
emit an event to notify the app of changes. This is useful
when co-ordinating different applications read/write of
custom metadata.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently when spawning containers with systemd, the container PID 1
will get moved into the systemd machine slice. Libvirt then manually
moves the libvirt_lxc and qemu-nbd processes into the cgroups associated
with the slice, but skips the systemd controller cgroup. This means that
from systemd's POV, libvirt_lxc and qemu-nbd are still part of the
libvirtd.service unit.
On systemctl daemon-reload, it will notice that libvirt_lxc & qemu-nbd
are in the libvirtd.service unit for the systemd controller, but in the
machine cgroups for resources. Systemd will thus move them back into
the libvirtd.service resource cgroups next time libvirtd is restarted.
This causes libvirtd to kill off the container due to incorrect cgroup
placement.
The solution is to ensure that when moving libvirt_lxc & qemu-nbd, we
also move the systemd cgroup controller placement. Normally this is
not something we ever want todo, but this is a special case as we are
intentionally wanting to move them to a different systemd unit.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently, there's only linux implementation for
virGetFCHostNameByFabricWWN(). Since the symbol is exported in
our private symbols we ought to have implementation for other
platforms too. This also triggers compilation error on FreeBSD:
../src/.libs/libvirt_driver_storage_impl.a(libvirt_driver_storage_impl_la-storage_backend_scsi.o): In function `createVport':
/usr/home/jenkins/libvirt-master/systems/libvirt-freebsd/build/src/../../src/storage/storage_backend_scsi.c:740: undefined reference to `virGetFCHostNameByFabricWWN'
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Separate out the "policy=discard" into it's own specific
qemu command line.
We'll rename "kvm-pit-device" test case to be "kvm-pit-discard"
since it has the syntax we'd be using.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
By a mistake, for the VIR_DOMAIN_TIMER_TICKPOLICY_DELAY qemu
command line creation, 'discard' was used instead of 'delay'
in commit id '1569fa14'.
Test "kvm-pit-delay" is fixed accordingly to show the correct
option being generated.
Remove the (now) redundant kvm-pit-device tests. As it turns
out there is no need to specify both QEMU_CAPS_NO_KVM_PIT and
QEMU_CAPS_KVM_PIT_TICK_POLICY since they are mutually exclusive
and "kvm-pit-device" becomes just the same as "kvm-pit-delay".
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1349696
As it turns out using only the 'parent' to achieve the goal of a
consistent vHBA parent has issues with reboots where the scsi_hostX
parent could change to scsi_hostY causing either failure to create
the vHBA or usage of the wrong HBA for our vHBA.
Thus add the ability to search for the "parent" by the parent wwnn/
wwpn values or just a fabric_name if someone only cares to ensure
usage of the same SAN for the vHBA.
Add new fields to the fchost structure to allow creation of a vHBA via
the storage pool when a parent_wwnn/parent_wwpn or parent_fabric_wwn is
supplied in the storage pool XML.
https://bugzilla.redhat.com/show_bug.cgi?id=1349696
When creating a vHBA, the process is to feed XML to nodeDeviceCreateXML
that lists the <parent> scsi_hostX to use to create the vHBA. However,
between reboots, it's possible that the <parent> changes its scsi_hostX
to scsi_hostY and saved XML to perform the creation will either fail or
create a vHBA using the wrong parent.
So add the ability to provide "wwnn" and "wwpn" or "fabric_wwn" to
the <parent> instead of a name of the scsi_hostN that is the parent.
The allowed XML will thus be:
<parent>scsi_host3</parent> (current)
or
<parent wwnn='$WWNN' wwpn='$WWPN'/>
or
<parent fabric_wwn='$WWNN'/>
Using the wwnn/wwpn or fabric_wwn ensures the same 'scsi_hostN' is
selected between hardware reconfigs or host reboots. The fabric_wwn
Using the wwnn/wwpn pair will provide the most specific search option,
while fabric_wwn will at least ensure usage of the same SAN, but maybe
not the same scsi_hostN.
This patch will add the new fields to the nodedev.rng for input purposes
only since the input XML is essentially thrown away, no need to Format
the values since they'd already be printed as part of the scsi_host
data block.
New API virNodeDeviceGetParentHostByWWNs will take the parent "wwnn" and
"wwpn" in order to search the list of devices for matching capability
data fields wwnn and wwpn.
New API virNodeDeviceGetParentHostByFabricWWN will take the parent "fabric_wwn"
in order to search the list of devices for matching capability data field
fabric_wwn.
Qemu has abandoned the +/-feature syntax in favor of key=value. Some
architectures (s390) do not support +/-feature. So we update libvirt to handle
both formats.
If we detect a sufficiently new Qemu (indicated by support for qmp
query-cpu-model-expansion) we use key=value else we fall back to +/-feature.
Signed-off-by: Collin L. Walling <walling@linux.vnet.ibm.com>
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
When qmp query-cpu-model-expansion is available probe Qemu for its view of the
host model. In kvm environments this can provide a more complete view of the
host model because features supported by Qemu and Kvm can be considered.
Signed-off-by: Collin L. Walling <walling@linux.vnet.ibm.com>
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
query-cpu-model-expansion is used to get a list of features for a given cpu
model name or to get the model and features of the host hardware/environment
as seen by Qemu/kvm.
Signed-off-by: Collin L. Walling <walling@linux.vnet.ibm.com>
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
On s390, the host's features are heavily influenced by not only the host
hardware but also by hardware microcode level, host OS version, qemu
version and kvm version. In this environment it does not make sense to
attempt to report exact host details.
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Acked-by: Jiri Denemark <jdenemar@redhat.com>
Implement compare for s390. Required to test the guest against the host for
guest cpu model runnability checking. We always return IDENTICAL to bypass
Libvirt's checking. s390 will rely on Qemu to perform the runnability checking.
Implement update for s390. required to support use of cpu "host-model" mode.
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Acked-by: Jiri Denemark <jdenemar@redhat.com>
Just so it doesn't bite us in the future, even though it's unlikely.
And fix the comment above it as well. Commit e08ee7cd34 took the
info from the function it's calling, but that was lie itself in the
first place.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The resulting function virFileGetMountSubtreeImpl() just uses
virStringSortRevCompare or virStringSortCompare which uses strcmp().
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
With my namespace patches, we are spawning qemu in its own
namespace so that we can manage /dev entries ourselves. However,
some filesystems mounted under /dev needs to be preserved in
order to be shared with the parent namespace (e.g. /dev/pts).
Currently, the list of mount points to preserve is hardcoded
which ain't right - on some systems there might be less or more
items under real /dev that on our list. The solution is to parse
/proc/mounts and fetch the list from there.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Our STREQ_NULLABLE and STRNEQ_NULLABLE macros are too
complicated. This was a result of some broken version of gcc.
However, that is long gone and therefore we can simplify the
macros.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If we restart libvirtd while VM was doing external memory snapshot, VM's
state be updated to paused as a result of running a migration-to-file
operation, and then VM will be left as paused state. In this case we must
restart the VM's CPUs to resume it.
Signed-off-by: Wang King <king.wang@huawei.com>
Rather than extraneous VIR_FREE's depending on where we are in the code,
move them to the top of the loop and in the cleanup path.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Move the check for an already existing vHBA to the top of the function.
No sense in first decoding a provided parent if the next thing we're going
to do is fail if a provided wwnn/wwpn already exists.
Signed-off-by: John Ferlan <jferlan@redhat.com>
If a <parent> is not supplied in the XML used to create a non-persistent
vHBA, then instead of failing, let's try to find a "vports" capable node
device and use that.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Extract out code from virNodeDeviceGetParentHost into helpers - it's
going to be reused in upcoming patches to search on more fields
Create virNodeDeviceFindVPORTCapDef in order to return a virNodeDevCapsDefPtr
of the VPORT_OPS and virNodeDeviceFindFCParentHost to use the function and
generate an error message if the device doesn't have the capability.
Also clean up the processing in virNodeDeviceGetParentHost to remove
need for goto's.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Commit 4b951d1e38 missed the fact that the
VM needs to be resumed after a live external checkpoint (memory
snapshot) where the cpus would be paused by the migration rather than
libvirt.
Again, not something that I'd hit, but there is a chance in
theory that this might bite us. Currently the way we decide
whether or not to create /dev entry for a device is by marching
first four characters of path with "/dev". This might be not
enough. Just imagine somebody has a disk image stored under
"/devil/path/to/disk". We ought to be matching against "/dev/".
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Not that I'd encounter any bug here, but the code doesn't look
100% correct. Imagine, somebody is trying to attach a device to a
domain, and the device's /dev entry already exists in the qemu
namespace. This is handled gracefully and the control continues
with setting up ACLs and calling security manager to set up
labels. Now, if any of these steps fail, control jump on the
'cleanup' label and unlink() the file straight away. Even when it
was not us who created the file in the first place. This can be
possibly dangerous.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1406837
Imagine you have a domain configured in such way that you are
assigning two PCI devices that fall into the same IOMMU group.
With mount namespace enabled what happens is that for the first
PCI device corresponding /dev/vfio/X entry is created and when
the code tries to do the same for the second mknod() fails as
/dev/vfio/X already exists:
2016-12-21 14:40:45.648+0000: 24681: error :
qemuProcessReportLogError:1792 : internal error: Process exited
prior to exec: libvirt: QEMU Driver error : Failed to make device
/var/run/libvirt/qemu/windoze.dev//vfio/22: File exists
Worse, by default there are some devices that are created in the
namespace regardless of domain configuration (e.g. /dev/null,
/dev/urandom, etc.). If one of them is set as backend for some
guest device (e.g. rng, chardev, etc.) it's the same story as
described above.
Weirdly, in attach code this is already handled.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Clang 3.9 refuses to compile the existing code with the
following error:
util/virfirewall.c:425:20: error: passing an object that undergoes
default argument promotion to 'va_start'
has undefined behavior [-Werror,-Wvarargs]
va_start(args, layer);
^
util/virfirewall.c:420:37: note: parameter of type 'virFirewallLayer'
is declared here
virFirewallLayer layer,
^
This happens because 'layer' is of type virFirewallLayer, which
is an enum type and not a standard type such as eg. void* or int.
To solve the issue, turn virFirewallAddRule() from a very thin
wrapper around virFirewallAddRuleFullV() to a macro that expands
to a call to virFirewallAddRuleFull() - itself a very thin wrapper
around the aforementioned virFirewallAddRuleFullV() - with no loss
of functionality or type safety.
https://bugzilla.redhat.com/show_bug.cgi?id=1405269
If a secret was not provided for what was determined to be a LUKS
encrypted disk (during virStorageFileGetMetadata processing when
called from qemuDomainDetermineDiskChain as a result of hotplug
attach qemuDomainAttachDeviceDiskLive), then do not attempt to
look it up (avoiding a libvirtd crash) and do not alter the format
to "luks" when adding the disk; otherwise, the device_add would
fail with a message such as:
"unable to execute QEMU command 'device_add': Property 'scsi-hd.drive'
can't find value 'drive-scsi0-0-0-0'"
because of assumptions that when the format=luks that libvirt would have
provided the secret to decrypt the volume.
Access to unlock the volume will thus be left to the application.
After 478ddedc12 a bug is fixed where we wrongly presumed loopack
device name on non-Linux systems. It's lo0. However, the fix is
not reflected in the tests which are failing now.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Due to nature of operations we do over the string list (more
precisely due to how virStringListRemove() works), it is not the
best idea to use dataFree callback. Problem is, on MAC address
remove, the string list remove function modifies the original
list in place. Then, virHashUpdateEntry() is called which frees
all the data stored in the list rendering @newMacsList point to
freed data.
==16002== Invalid read of size 8
==16002== at 0x50BC083: virFree (viralloc.c:582)
==16002== by 0x513DC39: virStringListFree (virstring.c:251)
==16002== by 0x51089B4: virMacMapHashFree (virmacmap.c:67)
==16002== by 0x50EF30B: virHashAddOrUpdateEntry (virhash.c:352)
==16002== by 0x50EF4FD: virHashUpdateEntry (virhash.c:415)
==16002== by 0x5108BED: virMacMapRemoveLocked (virmacmap.c:129)
==16002== by 0x51092D5: virMacMapRemove (virmacmap.c:346)
==16002== by 0x402F02: testMACRemove (virmacmaptest.c:107)
==16002== by 0x403F15: virTestRun (testutils.c:180)
==16002== by 0x4032C4: mymain (virmacmaptest.c:205)
==16002== by 0x405A3B: virTestMain (testutils.c:992)
==16002== by 0x403D87: main (virmacmaptest.c:237)
==16002== Address 0xdd5a4d0 is 0 bytes inside a block of size 24 free'd
==16002== at 0x4C2AD6F: realloc (vg_replace_malloc.c:693)
==16002== by 0x50BB99B: virReallocN (viralloc.c:245)
==16002== by 0x513DC0B: virStringListRemove (virstring.c:235)
==16002== by 0x5108BA6: virMacMapRemoveLocked (virmacmap.c:124)
==16002== by 0x51092D5: virMacMapRemove (virmacmap.c:346)
==16002== by 0x402F02: testMACRemove (virmacmaptest.c:107)
==16002== by 0x403F15: virTestRun (testutils.c:180)
==16002== by 0x4032C4: mymain (virmacmaptest.c:205)
==16002== by 0x405A3B: virTestMain (testutils.c:992)
==16002== by 0x403D87: main (virmacmaptest.c:237)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>