Functions virshSecretEventNameCompleter, virshPoolEventNameCompleter,
virshNodedevEventNameCompleter allocates only enough space
for array of N strings.
However these are null terminated strings, so program needs to
alloc space for array of N + 1 strings.
How to replicate error: valgrind virsh, use completer for
'nodedev-event --event' or 'pool-event --event' or
'secret-event --event'.
Signed-off-by: Simon Kobyda <skobyda@redhat.com>
Adding sata bus address support to the optional address parameter of virsh
attach-disk. The address is used as controller.bus.unit. e.g.
sata:0.0.0
Signed-off-by: Han Han <hhan@redhat.com>
Adding usb bus address support to the optional address parameter
of virsh attach-disk. The address is used as bus:port. e.g. usb:1:1.
Signed-off-by: Han Han <hhan@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In [1], <type> are described as "on_poweroff", "on_reboot",
"on_crash". but we accept "poweroff", "reboot" and "crash".
This patch adds documentation for them.
[1]: https://libvirt.org/formatdomain.html#elementsEvents
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This patch introduces --all to show all block devices info
of guests like:
virsh # domblkinfo w08 --all
Target Capacity Allocation Physical
---------------------------------------------------
hda 42949672960 9878110208 9878110208
vda 10737418240 10736439296 10737418240
Target Capacity Allocation Physical
---------------------------------------------------
hda 40.000 GiB 9.200 GiB 9.200 GiB
vda 10.000 GiB 9.999 GiB 10.000 GiB
For inactive domains using networked storage, a "-" will
be printed instead of the value since it's not possible
to determine the value without the storage connection.
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This new switch can be used to set
VIR_CONNECT_GET_ALL_DOMAINS_STATS_NOWAIT flag for stats
fetching API.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Replace instances where we previously called virGetLastError just to
either get the code or to check if an error exists with
virGetLastErrorCode to avoid a validity pre-check.
Signed-off-by: Ramy Elkest <ramyelkest@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This command is a virsh wrapper for virConnectBaselineHypervisorCPU.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This command is a virsh wrapper for virConnectCompareHypervisorCPU.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
The domain capabilities XML contains host CPU model tailored to a
specific hypervisor and since it's enclosed in <mode name='host-model'>
element rather then the required <cpu> it's impossible to directly use
the host CPU model as an input to, e.g., cpu-compare command. To make
this more convenient, vshExtractCPUDefXML now accepts full domain
capabilities XML and automatically transforms the host CPU models into
the form accepted by libvirt APIs.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Both cpu-compare and cpu-baseline commands accept more that just CPU
definition XML(s). For users' convenience they are able to extract the
CPU definition(s) even from domain XML or capabilities XML. The main
differences between the two commands is in the number of CPU definitions
they expect: cpu-compare wants only one CPU definition while
cpu-baseline expects one or more CPUs.
The extracted code forms a new vshExtractCPUDefXML function.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similarly to cpu-models these two commands do not operate on a domain
and should be listed in the "Host and Hypervisor" commands section.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The next patch will use it in virsh-completer.c for returning the name
list of nodedev events.
Signed-off-by: Lin Ma <lma@suse.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The next patch will use it in virsh-completer.c for returning the name
list of pool events.
Signed-off-by: Lin Ma <lma@suse.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The next patch will use it in virsh-completer.c for returning the
strings of domain event name. At the same time, rename it to
avoid possible name clashing.
Signed-off-by: Lin Ma <lma@suse.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The next patch will use it in virsh-completer.c for returning the name
list of secret events.
The patch code originally authored by Michal Privoznik, Please refer to
https://www.redhat.com/archives/libvir-list/2018-May/msg01022.html
I splitted it to 2 patches with tiny change.
Signed-off-by: Lin Ma <lma@suse.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
These two functions were duplicating some cleanup paths, so let's just merge
both cleanup and error paths together. To distinguish whether we need to
clean-up the return value let's keep it in @tmp until the function is successful
in which case we set @ret to the value of @tmp and set @tmp to NULL.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rather than have virJSONValueArraySize return a -1 when the input
is not an array and then splat an error message, let's check for
an array before calling and then change the return to be a size_t
instead of ssize_t.
That means using the helper virJSONValueIsArray as well as using a
more generic error message such as "Malformed <something> array".
In some cases we can remove stack variables and when we cannot,
those variables should be size_t not ssize_t. Alter a few references
of if (!value) to be if (value == 0) instead as well.
Some callers can already assume an array is being worked on based
on the previous call, so there's less to do.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Currently the VSH_OT_ARGV options don't support complete, But some of
VSH_OT_ARGV options are gonna support complete in upcoming patches.
Once applied the upcoming completion patches for VSH_OT_ARGV options, If
we don't ignore VSH_OT_ARGV here, The vshReadlineOptionsGenerator will
be called, Hence complete output will consist of the result by command
completer + the result by option completer, It's confusing.
e.g.
$ virsh domstats --domain <TAB><TAB>
--backing --interface --list-paused --perf --vcpu
--balloon leap42.3 --list-persistent --raw win10
--block --list-active --list-running sles12sp3
--cpu-total --list-inactive --list-shutoff sles15
--enforce --list-other --list-transient --state
After this patch and the upcoming completion patches:
$ virsh domstats --domain <TAB><TAB>
leap42.3 sles12sp3 sles15 win10
Signed-off-by: Lin Ma <lma@suse.com>
It's helpful for users while they type certain kind of VSH_OT_ARGV options.
e.g.
$ virsh domstats --domain sles12sp3 --d<TAB>
Signed-off-by: Lin Ma <lma@suse.com>
The first entry in the returned array is the substitution for TEXT. It
causes unnecessary output if other commands or options share the same
prefix, e.g.
$ virsh des<TAB><TAB>
des desc destroy
or
$ virsh domblklist --d<TAB><TAB>
--d --details --domain
This patch fixes the above issue.
Signed-off-by: Lin Ma <lma@suse.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
centralize the definition of macro VIRSH_COMMON_OPT_DOMAIN_FULL to virsh.h
to avoid unnecessary duplicated definition
Signed-off-by: Lin Ma <lma@suse.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If another event in background while running libvirt-guests.sh
completely undefines a guest it will no more be available for proper
reporting of its shutdown.
This appears in the log as:
Failed to determint state of guest: <UUID>. Not tracking it anymore
Shutdown of guest complete
The first message already reports that we are giving up on the guest
(per UUID which is all we have left at that point). To avoid the message
with an empty guest_name in such a case lets check what guest_name
returned and only print a report on valid content.
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Dariusz Gadomski <dariusz.gadomski@canonical.com>
The recent fix to libvirt-guests.sh.in works for what it intended to fix
(variable scope) but failed to adapt the loop in check_guests_shutdown
correctly. Due to that it currently might detect all guests as "Failed to
determine state of guest" by bad var content or just assumes they are shut
down by picking up an empty variable.
This commit fixes loop to use the passed value and the call in the loop
to actually use the variable assigned in the iterated.
Fixes: 7e476356 "tools: fix variable scope in in check_guests_shutdown"
Fixes: https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/1764668
Reviewed-by: Dariusz Gadomski <dariusz.gadomski@canonical.com>
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Historically we have relied on autopoint/gettextize to install a
standard po/Makefile.in.in. There is very limited scope for customizing
this and it also causes a bunch of extra stuff to be pulled into
configure.ac which potentially clashes with gnulib. Writing make rules
for po file management is no more difficult than any other rules libvirt
has, so stop using autopoint/gettextize.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1529256
If one of the virStorageVolLookupBy{Key|Name|Path} succeeds and
we have a @vol, then clear the last libvirt error; otherwise, a
subsequent "other" failure may cause vshReportError to erroneously
report the wrong error as well as a reported 'vshError' error that
caused the failure.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Historically we have used a bare lxc:/// URI for connecting to LXC. This
is different from our practice with QEMU, UML, Parallels, Libxl, BHyve
and VirtualBox drivers, which all use a path of '/system' or '/session'
or both.
By making LXC allow '/system', we have fully standardized on the use of
either '/system' or '/session' for all the stateful drivers that run
inside libvirtd.
Support for lxc:/// is of course maintained for back-compat.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Historically we have used a bare xen:/// URI for connecting to the
legacy Xen driver. The new libxl Xen driver follows the new practice
of allowing '/system' as a path, as well as bare '/' for compat with
the old Xen driver.
This documents xen:///system as the preferred format for Xen, leaving
xen:/// as an undocumented feature just for back-compat.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
libvirt-guests.sh when run with more active guests than requested to
shut down in parallel will run until it times out only shutting down
the first set of guests.
This patch fixes parallel shutdown by fixing a variable scope issue
where check_guests_shutdown unintentionally reset $guests which
prevented further progress.
Fixes: https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/1688508
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Instead of appearing as one long paragraph, split the output to list
each command option on its own line for better readability.
Signed-off-by: John Ferlan <jferlan@redhat.com>
The proper command order is 'virsh vol-path volume pool', or
'virsh vol-name volume pool', or 'virsh vol-key volume'. While
making the modification clean up the description a bit too in order
to help clarify under what circumstances the volume could be found
if the pool name was not provided.
Signed-off-by: John Ferlan <jferlan@redhat.com>
The proper command order is 'virsh vol-info volume pool'. While
making the modification clean up the description a bit too in order
to help clarify under what circumstances the volume could be found
if the pool name was not provided.
Signed-off-by: John Ferlan <jferlan@redhat.com>
The proper command order is 'virsh vol-dumpxml volume pool'. While
making the modification clean up the description a bit too in order
to help clarify under what circumstances the volume could be found
if the pool name was not provided.
Signed-off-by: John Ferlan <jferlan@redhat.com>
The proper command order is 'virsh vol-wipe volume pool algorithm'. While
making the modification clean up the description a bit too in order
to help clarify under what circumstances the volume could be found
if the pool name was not provided.
Signed-off-by: John Ferlan <jferlan@redhat.com>
The proper command order is 'virsh vol-download volume file pool'. While
making the modification clean up the description a bit too in order
to help clarify under what circumstances the volume could be found
if the pool name was not provided.
Signed-off-by: John Ferlan <jferlan@redhat.com>
The proper command order is 'virsh vol-upload volume file pool'. While
making the modification clean up the description a bit too in order
to help clarify under what circumstances the volume could be found
if the pool name was not provided.
Signed-off-by: John Ferlan <jferlan@redhat.com>
The proper command order is 'virsh vol-delete volume pool'. While
making the modification clean up the description a bit too in order
to help clarify under what circumstances the volume could be found
if the pool name was not provided.
Signed-off-by: John Ferlan <jferlan@redhat.com>
The proper command order is 'virsh vol-clone source-vol target-vol pool'.
While making the modification clean up the description a bit too in
order to help clarify under what circumstances the source-vol could be
found if the pool name was not provided.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Clean up the formatting to make the output a bit more readable at
least with respect to not having one paragraph of output. Each
option will start on its own line.
Signed-off-by: John Ferlan <jferlan@redhat.com>
We can use:
domifaddr f26-cloud --source arp
to get the address.
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
This time around it's not enough to just pick the latest commit,
because with aed87bb2aa6ed83b49574eb982e3bdd4c36acf17 keycodemapdb
renamed the 'rfb' keycode to 'qnum' and we need to accept the new
name while maintaining backwards compatibility.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add the ability to provide the adapter parent_wwnn and parent_wwpn
or the parent_fabric_wwn on the virsh command line for the pool
define/create as commands. Update the virsh.pod description.
Signed-off-by: John Ferlan <jferlan@redhat.com>
One short sentence won't do it justice, but it could help by listing
scsi_hostN and vHBA to point one in the right direction.
Signed-off-by: John Ferlan <jferlan@redhat.com>
The description was missing the wwnn and wwpn names for the
--adapter-wwnn and --adapter-wwpn switches. Just add it to be
clear that the fields cannot be empty (IOW they are not boolean).
Signed-off-by: John Ferlan <jferlan@redhat.com>
so it's not affected by flags that might be passed in $(*_LIBS) like
-L/usr/lib which might result in linking against system library and
requiring incorrect version of private symbols
Signed-off-by: Jan Palus <atler@pld-linux.org>
Currently if cmd->skipChecks is set (done only from completers)
some basic checks are skipped because we're working over
partially parsed command. See a26ff63ae4 for more detailed
explanation. Anyway, the referenced commit was too aggressive in
disabling checks and effectively returned success even in clear
case of failure. For instance:
# domif-getlink --interface <TAB><TAB>
causes virshDomainInterfaceCompleter() to be called, which calls
virshDomainGetXML() which eventually calls
vshCommandOptStringReq(.., name = "domain"); The --domain
argument is required for the command and if not present -1 should
be returned to tell the caller the argument was not found. Well,
zero is returned meaning the argument was not found but it's not
required either.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The commands which requires a pool to perform any action for a volume is
throwing a segfault when you pass the volume name before a pool name or
without the argument '--pool'.
An example that works:
virsh # vol-list loops-pool
Name Path
-------------------------------------------------------------------
loop0 /mnt/loop0
virsh # vol-info --pool loops-pool lo<TAB>
An example that does not work:
virsh # vol-list loops-pool
Name Path
-------------------------------------------------------------------
loop0 /mnt/loop0
virsh # vol-info lo<TAB>
Segmentation Fault
The example 'vol-info' can be executed as 'vol-info loop0 --pool
loops-pool'. So, this commit fixes this problem when the arguments are
inverted and avoids the segfault.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
While libvirt-guests.sh is running cases can let guest_is_on fail which
causes check_guests_shutdown to print output.
That output shall not spill into the users of function
check_guests_shutdown which is therefore now returning values in a
variable like guest_is_on already did.
Original-Author: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Modified-By: Jorge Niedbalski <niedbalski@ubuntu.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Cast away enum type in places where we don't wish to cover all cases.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The variable names for the options and information about a command
should have an underscore in places where the virsh command has a
hyphen. The function callback name should capitalize the letter after
the hyphen. This was not used in 'blockcommit', 'blockcopy', 'blockjob',
'blockpull', and 'blockresize' commands.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Previously we've removed the data only in virshUpdateDiskXML when
changing the disk source for the CDROM since the backing store would be
invalid. Move the code into a separate function and callit from
virshFindDisk which is also used when detaching disk.
The detaching code does not necessarily need to get the full backing
chain since it will need to act on the one managed by libvirt anyways
and this also takes care of problems when parts of the backing store
were invalid due to buggy RBD detection code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Similarly to other commands add an argument which allows to check the
XML which would be used to execute the operation instead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Undefined symbols are a bad thing in general because they can get
resolved in unexpected ways at runtime if multiple sources provide the
same symbol name. For example both glibc and libtirpc may provide XDR
symbols and we want to ensure that we resolve to libtirpc if that's what
we originally built against.
The toolchain maintainers thus strongly recommend that all applications
use the '-z defs' linker flag to prevent undefined symbols. This is
shortly becoming part of the default linker flags for RPMs. As an added
benefit this aligns Linux builds with Windows builds, where the linker
has never permitted undefined symbols.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently when the script validates the PKI files and
the certificate 'Subject:' field contains RDNs after
the Common Name (CN), these values are also included,
creating a false result that the CN is not correct.
A small change to the sed regex fixes this issue, by
extracting only the value for CN and nothing else. The
regex is replaced with the exact same regex used to
extract the CN value from the client certificate.
"ln" will not replace an existing symlink, so if you run 'make install'
twice, the second time will get an error:
ln: failed to create symbolic link 'virsh': File exists
We must always remove the symlink target first.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The bash-completion project documents that only those scripts
from $BASH_COMPLETIONS_DIR that share name with the current
command for which <TAB> was hit are loaded [1]. This means, that
vsh script we have there is not loaded. We have to create
symlinks for virsh and virt-admin.
At the same time, we have to create new RPM package because
virt-admin and client packages are independent. That means we
cannot place the vsh script in either of them. What we can do is
to have a different package that contains the completion script
and then virt-admin and client packages contain only the symlink
and require the bash-completion package.
1: https://github.com/scop/bash-completion#faq
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
