https://bugzilla.redhat.com/show_bug.cgi?id=1632833
When doing a SCSI passthrough we don't put format= onto the
command line. This causes qemu to probe the format automatically
which ends up in a warning in the domain log and possible qemu
disabling writes to the first block (according to the warning
message).
Based-on-work-of: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
-net name= will be deprecated in QEMU 3.1:
commit 101625a4d4ac7e96227a156bc5f6d21a9cc383cd
net: Deprecate the "name" parameter of -net
git describe: v3.0.0-791-g101625a4d4
Use the id option instead, supported since QEMU 1.2:
commit 6687b79d636cd60ed9adb1177d0d946b58fa7717
convert net_client_init() to OptsVisitor
git describe: v1.0-3564-g6687b79d63 contains: v1.2.0-rc0~142^2~8
Thankfully, libvirt only uses -net for non-PCI, non-virtio NICs
on ARM.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
We now explicitly handle media change elsewhere so we can drop the
switch statement. This will also make it more intuitive once CDROM
device hotplug might be supported.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Disk hotplug has slightly different semantics from media changing. Move
the media change code out and add proper initialization of the new
source object and proper cleanups if something fails.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
The disk hotplug code also overloads media change which is not ideal.
This will allow splitting out of the media change code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
The disk storage source needs to be prepared if we want to use -blockdev
or secrets for the new media image. It does not hurt to do the same for
the legacy hotplug code as well.
Unfortunately helpers like qemuDomainPrepareDiskSource take
virDomainDiskDef as an argument and it would be hard to fix them to take
an explicit source, so the function also temporarily replaces disk->src
for the new source in this function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Some functions require us to replace disk->src with the new source for
them to work properly. To avoid confusion all places which allow
explicit virStorageSource should get the appropriate definition.
The legacy code fortunately does not need anything from the old source
so that does not require modifications.
Blockdev does require the old definition so we'll pass it explicitly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Since the code is also used when changing media we need to allow
specifying explicit source for which we are going to prepare. With this
change callers don't have to replace disk->src with the new source
definition for generating these.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
qemu media changing code tried to assume old media's format for the new
one if that was not specified. Since the format will always be present
it does not make sense to keep the code around.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Old media changing code does not bother setting up the secrets for new
media or actually removing/adding of the corresponding objects.
Additionally it uses secrets setup for the old image to be removed as
the secret for the new image which is wrong.
Remove the support for secrets while changing media for the legacy
approach. The only reasonable way to fix it is when using blockdev.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
While the idea was good the implementation not so much as we need to
take into account the old disk data and the new source. The code will be
consolidated later in a different way.
This reverts commit 663b1d55de.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Preparing the storage source prior to assigning the alias will not work
as the names of the certain objects depend on the alias for the legacy
hotplug case as we generate the object names for the secrets based on
the alias.
This reverts commit 192fdaa614.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
My commit d6b8838 fixed the uid:gid for the pre-created UNIX sockets
but did not account for the different umask of libvirtd and QEMU.
Since commit 0e1a1a8c we set umask to '0002' for the QEMU process.
Manually tune-up the permissions to match what we would have gotten
if QEMU had created the socket.
https://bugzilla.redhat.com/show_bug.cgi?id=1633389
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This function updates the used QEMU capabilities of @vm by querying
the QEMU capabilities cache.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Turns out, there are couple of bugs that prevent this feature
from being operational. Given how close to the release we are
disable the feature temporarily. Hopefully, it can be enabled
back after all the bugs are fixed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Let's ignore the checking of interface type when we call the function
qemuARPGetInterfaces to get IP from host's arp table.
Signed-off-by: Lin Ma <lma@suse.com>
Reviewed-by: Chen Hanxiao <chenhanxiao@gmail.com>
The only place where VIR_DOMAIN_EVENT_RESUMED should be generated is the
RESUME event handler to make sure we don't generate duplicate events or
state changes. In the worse case the duplicity can revert or cover
changes done by other event handlers.
For example, after QEMU sent RESUME, BLOCK_IO_ERROR, and STOP events
we could happily mark the domain as running and report
VIR_DOMAIN_EVENT_RESUMED to registered clients.
https://bugzilla.redhat.com/show_bug.cgi?id=1612943
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Thanks to the previous commit the RESUME event handler knows what reason
should be used when changing the domain state to VIR_DOMAIN_RUNNING, but
the emitted VIR_DOMAIN_EVENT_RESUMED event still uses a generic
VIR_DOMAIN_EVENT_RESUMED_UNPAUSED detail. Luckily, the event detail can
be easily deduced from the running reason, which saves us from having to
pass one more value to the handler.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Whenever we get the RESUME event from QEMU, we change the state of the
affected domain to VIR_DOMAIN_RUNNING with VIR_DOMAIN_RUNNING_UNPAUSED
reason. This is fine if the domain is resumed unexpectedly, but when we
sent "cont" to QEMU we usually have a better reason for the state
change. The better reason is used in qemuProcessStartCPUs which also
sets the domain state to running if qemuMonitorStartCPUs reports
success. Thus we may end up with two state updates in a row, but the
final reason is correct.
This patch is a preparation for dropping the state change done in
qemuMonitorStartCPUs for which we need to pass the actual running reason
to the RESUME event handler and use it there instead of
VIR_DOMAIN_RUNNING_UNPAUSED.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This patch replaces some rather generic VIR_DOMAIN_RUNNING_UNPAUSED
reasons when changing domain state to running with more specific ones.
All of them are done when libvirtd reconnects to an existing domain
after being restarted and sees an unfinished migration or save.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
VIR_DOMAIN_EVENT_RESUMED_FROM_SNAPSHOT was defined but not used anywhere
in our event generation code. This fixes qemuDomainRevertToSnapshot to
properly report why the domain was resumed.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Once we introduce cgroup v2 support we need to handle processes and
threads differently.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
In cgroup v2 we need to handle processes and threads differently,
following patch will introduce virCgroupAddThread.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
In a following case:
virsh start $domain
service libvirtd stop
<shutdown> the guest from within the $domain
service libvirtd start
Notice that PCI devices which have been assigned to the $domain will
still be bound to stub drivers instead rebound to host drivers.
In that case the call stack is like below:
libvirtd start
qemuProcessReconnect
qemuProcessStop (because $domain was shutdown without
libvirtd event to process that)
qemuHostdevReAttachDomainDevices
qemuHostdevReAttachPCIDevices
virHostdevReAttachPCIDevices
However, because qemuHostdevUpdateActiveDomainDevices was called
after the qemuConnectMonitor, the setup of the tracking of each
host device in the $domain on either the activePCIHostdevs list
or inactivePCIHostdev list will not occur in an orderly manner.
Therefore, virHostdevReAttachPCIDevices just neglects these host PCI
devices which are bound to stub drivers and doesn't rebind them to
host drivers.
This patch fixs that by moving qemuHostdevUpdateActiveDomainDevices before
qemuConnectMonitor during libvirtd reconnection processing.
Signed-off-by: Wu Zongyong <cordius.wu@huawei.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Use the new qemuDomainRemoveInactiveJobLocked to remove the
@obj during the virDomainObjListForEach call which holds a
lock on the domain object list.
Signed-off-by: Wang Yechao <wang.yechao255@zte.com.cn>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Create a qemuDomainRemoveInactiveJobLocked which copies
qemuDomainRemoveInactiveJob except of course calling
another new helper qemuDomainRemoveInactiveLocked.
The qemuDomainRemoveInactiveLocked is a copy of
qemuDomainRemoveInactive except that instead of calling
virDomainObjListRemove it calls virDomainObjListRemoveLocked.
Signed-off-by: Wang Yechao <wang.yechao255@zte.com.cn>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Introduce qemuDomainRemoveInactiveJobCommon to handle what will
be the common parts of the code with a new function that will
be used to call virDomainObjListRemoveLocked instead of the
unlocked variant.
Signed-off-by: Wang Yechao <wang.yechao255@zte.com.cn>
Reviewed-by: John Ferlan <jferlan@redhat.com>
It was already available in 1.5.0, so we can assume it's
present and avoid checking for it at runtime.
This commit is best viewed with 'git show -w'.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
We already prefer them in capabilities, and domcapabilities
should be consistent with that.
This commit is best viewed with 'git show -w'.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
The new implementation contains less duplicated code and
is easier to extend.
This commit is best viewed with 'git show -w'.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Now that we have reduced the number of sensible options down
to either the native QEMU binary or RHEL's qemu-kvm, we can
make virQEMUCapsInitGuest() a bit simpler.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Both Fedora's qemu-kvm and Debian's/Ubuntu's kvm are nothing
more than paper-thin wrappers around the native QEMU binary,
so we gain nothing by looking for them.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
We're only ever passing a single binary when calling this
function, so we can remove all code dealing with the
possibility of a second binary being specified.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
When the guest is native, we are currently looking at
potential KVM binaries regardless of whether or not we have
already located a QEMU binary suitable to run the guest.
This made sense back when KVM support was not part of QEMU
proper, but these days the KVM binaries are in most cases
just trivial wrapper scripts around the native QEMU binary
so it doesn't make sense to poke at them unless they're
the only binaries on the system, such as when running on
RHEL.
This will allow us to simplify both virQEMUCapsInitGuest()
and virQEMUCapsInitGuestFromBinary().
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
When running an armv7l guest on an aarch64 hosts, the
qemu-system-aarch64 binary should be our first choice instead
of qemu-system-arm since the former can take advantage of KVM
acceleration.
Move the special case to virQEMUCapsFindBinaryForArch() so
that it's handled along with all other cases rather than on
its own later on.
Doing so will also make further refactoring easier.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
virCapabilitiesAddGuestDomain() takes an optional binary
name: this is intended for cases where a certain domain
type can't use the default one registered for the guest
architecture, but has to use a special binary instead.
The current code, however, will pass 'binary' again when
'kvmbin' is not defined, which is unnecessary as 'binary'
has been registered as default earlier, and will result
in capabilities output such as
<emulator>/usr/bin/qemu-system-x86_64</emulator>
<domain type='qemu'/>
<domain type='kvm'>
<emulator>/usr/bin/qemu-system-x86_64</emulator>
</domain>
with the second <emulator> element providing no additional
information.
Change it so that, when 'kvmbin' is not defined, NULL is
passed and so the default emulator will be used instead.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
The function performing the checks, rather than its callers,
should contain comments explaining the rationale behind said
checks.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1630164
Since 2a13a0a103 we are querying the vhostuser's interface name
when building qemu command line. However, we forgot to do so on
hotplug.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
There seems to be no need to add the ignore_value wrapper or
caste with (void) to the unlink() calls, so let's just remove
them. I assume at one point in time Coverity complained. So,
let's just be consistent - those that care to check the return
status can and those that don't can just have the naked unlink.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1607202
It's essentially stated in the nwfilterBindingDelete that we
will allow the admin to shoot themselves in the foot by deleting
the nwfilter binding which then allows them to undefine the
nwfilter that is in use for the running guest...
However, by allowing this we cause a problem for libvirtd
restart reconnect processing which would then try to recreate
the missing binding attempting to use the deleted filter
resulting in an error and thus shutting the guest down.
So rather than keep adding virDomainConfNWFilterInstantiate
flags to "ignore" specific error conditions, modify the logic
to ignore, but VIR_WARN errors other than ignoreExists. This
will at least allow the guest to not shutdown for only nwfilter
binding errors that we can now perhaps recover from since we
have the binding create/delete capability.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
All of the ones being removed are pulled in by internal.h. The only
exception is sanlock which expects the application to include <stdint.h>
before sanlock's headers, because sanlock prototypes use fixed width
int, but they don't include stdint.h themselves, so we have to leave
that one in place.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
It doesn't really make sense for us to have stdlib.h and string.h but
not stdio.h in the internal.h header.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
When restoring a domain from a compressed image, we launch an
intermediate process for decompressing the saved data. If QEMU fails to
load the data for some reason, we force close the stdin/stdout file
descriptors of the intermediate process and wait for it to die. However,
virCommandWait can report various errors which would overwrite the real
error from QEMU. Thus instead of getting something useful:
internal error: process exited while connecting to monitor:
2018-09-17T15:17:29.998910Z qemu-system-x86_64: can't apply global
Skylake-Client-x86_64-cpu.osxsave=off: Property '.osxsave' not found
we could get an irrelevant error message:
internal error: Child process (lzop -dc --ignore-warn) unexpected
fatal signal 13
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Now that we know what metadata lock manager user wishes to use we
can load it when initializing security driver. This is achieved
by adding new argument to virSecurityManagerNewDriver() and
subsequently to all functions that end up calling it.
The cfg.mk change is needed in order to allow lock_manager.h
inclusion in security driver without 'syntax-check' complaining.
This is safe thing to do as locking APIs will always exist (it's
only backend implementation that changes). However, instead of
allowing the include for all other drivers (like cpu, network,
and so on) allow it only for security driver. This will still
trigger the error if including from other drivers.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This config option allows users to set and enable lock manager
for domain metadata. The lock manager is going to be used by
security drivers to serialize each other when changing a file
ownership or changing the SELinux label. The only supported lock
manager is 'lockd' for now.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The file being present doesn't necessarily mean anything these
days, as it's created independently of whether the kvm module
has been loaded[1]; moreover, we're already gathering all the
information we need through QMP, so poking the filesystem at
all is entirely unnecessary.
[1] https://github.com/systemd/systemd/commit/d35d6249d5a7ed3228
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This capability is documented as having one meaning (whether
KVM is enabled by default) but is actually assigned two other
meanings over its life: whether the query-kvm QMP command is
available at first, and later on whether KVM is usable / was
used during probing.
Since the query-kvm QMP command was available in 1.5.0, we
can avoid probing for it; additionally, we can simplify the
logic by setting the flag when it applies instead of initially
setting it and then clearing it when it doesn't.
The flag's description is also updated to reflect reality.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
A side effect of recent changes is that we would always try
to regenerate the capabilities cache for non-native QEMU
binaries based on /dev/kvm availability, which is of course
complete nonsense. Make sure that doesn't happen.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
It was already available in 1.5.0.
Moreover, we're not even formatting it on the QEMU command
line, ever: we just use it as part of some logic that decides
whether KVM support should be advertised, and as it turns out
that logic is actually buggy and dropping this capability
fixes it.
https://bugzilla.redhat.com/show_bug.cgi?id=1628469
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Now that committing transactions using pid == -1 means that we're
not fork()-ing to run the transaction in a specific namespace, we
can utilize the transaction processing semantics in order to
start, run a or multiple commands, and then commit the
transaction without being concerned with other interactions or
transactions interrupting the processing. This will eventually
allow us to have a single place where all the paths can be
locked, followed by relabeling and unlocking again.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
In the future, the transactions are not going to be optional and
they will be run regardless of domain using namespace to collect
list of paths to be relabeled.
To make sure there won't be an API that goes behind transaction
code back update the comment that serves as decision manual
whether an API must be fully implemented or plain #define is
sufficient.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Even though the current use of the functions does not require full
implementation with transactions (none of the callers passes a path
somewhere under /dev), it doesn't hurt either. Moreover, in
future patches the paradigm is going to shift so that any API
that touches a file is required to use transactions.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Even though the current use of the function does not require full
implementation with transactions (none of the callers pass a path
somewhere under /dev), it doesn't hurt either. Moreover, in
future patches the paradigm is going to shift so that any API
that touches a file is required to use transactions.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
It is not a problem at all if the `tss` user/group does not exist, the code
fallbacks to the `root` user/group. However we report a warning for no reason
on every start-up. Fix this by checking if the user/group actually exists.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
After removing the host CPU model re-computation,
this function is no longer necessary.
This reverts commits:
commit d0498881a0
virQEMUCapsFreeHostCPUModel: Don't always free host cpuData
commit 5276ec712a
testUpdateQEMUCaps: Don't leak host cpuData
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Commit 82327038 moved a couple of checks out of the XML parser
into the domain validation; however, those checks seem to be more
useful as hypervisor specific checks rather than the more general
domain conf checks (nothing in the docs indicate a specific error).
Fortunately only QEMU was processing the memoryBacking, thus
add the changes to qemuDomainDefValidateMemory and change the
code a bit to make usage of the similar deref to def->mem and
the mem->nhugepages filter.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
We require QEMU 1.5.0 these days, so checking for versions
older than that is pointless.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The capability was introduced in QEMU 1.5.0, which is our
minimum supported QEMU version these days.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The capability was introduced in QEMU 1.3.1 and we require
QEMU 1.5.0 these days.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In some cases we are checking if the mount namespace is enabled
at two places: one is at the beginning of exported function (e.g.
qemuDomainNamespaceSetupDisk()) and the other is at the beginning
of qemuDomainNamespaceMknodPaths() which is called from the
former function anyway. Then we have some other functions which
rely on the later check solely.
In order to compensate for possibly needless function call,
qemuDomainNamespaceMknodPaths() returns early if @npaths is zero.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Commit 5b3492fadb moved qemuAgentCheckError calls into
qemuAgentCommand for various reasons; however, subsequent
commit 0977b8aa0 adding a new command made call again
So let's just remove the duplicitous call from
qemuAgentGetInterfaces.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Commit 5b3492fadb moved qemuAgentCheckError calls into
qemuAgentCommand for various reasons; however, subsequent
commit b1aa91e14 restored the call. So let's just remove
the duplicitous call from qemuAgentSetVCPUsCommand.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Previous commits removed all capabilities from per-device property
probing for:
pci-assign
kvm-pci-assign
usb-host
scsi-generic
Remove them from the virQEMUCapsDeviceProps list and get rid of the
redundant device-list-properties QMP calls.
Note that 'pci-assign' was already useless, because the QMP version
of the device is called 'kvm-pci-assign', see libvirt commit 7257480
from 2012.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Introduced by QEMU commit 28b77657 in v1.0-rc4~21^2~8.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Introduced by QEMU commit c29029d which was included in 1.5.0
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
At the time of the addition of 'pci-assign' in QEMU commit
v1.3.0-rc0~572^2 the bootindex argument was already supported.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
At the time of the addition of 'pci-assign' in QEMU commit
v1.3.0-rc0~572^2 the configfd argument was already supported.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Added by commit fc66c1603c and not used since.
Also, the device was present in QEMU 1.5.0 so this capability
will not be needed if we ever decide to implement usb-net support.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The qemuSecurityDomainSetPathLabel() function reports perfect
error itself. Do not overwrite it to something less meaningful.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There is no need to check if @npaths is not zero. Let's
qemuDomainNamespaceUnlinkPaths() handle that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
A virtio device such as
<controller type='scsi' model='virtio-scsi'/>
will be translated to one of four different QEMU devices
based on the address type. This behavior is the same for
all virtio devices, but unfortunately we have separate
ad-hoc code dealing with each and every one of them: not
only this is pointless duplication, but it turns out
that most of that code is not robust against new address
types being introduced and some of it is outright buggy.
Introduce a new function, qemuBuildVirtioDevStr(), which
deals with the issue in a generic fashion, and rewrite
all existing code to use it.
This fixes a bunch of issues such as virtio-serial-pci
being used with virtio-mmio addresses and virtio-gpu
not being usable at all with virtio-mmio addresses.
It also introduces a couple of minor regressions,
namely no longer erroring out when attempting to
use virtio-balloon and virtio-input devices with
virtio-s390 addresses; that said, virtio-s390 has
been superseded by virtio-ccw such a long time ago
that recent QEMU releases have dropped support for
the former entirely, so re-implementing such
device-specific validation is not worth it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The appropriate time to ensure the required capabilities are
present is validate rather than command line generation: add
a new qemuDomainDeviceDefValidateInput() function and move
all existing checks there.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
So far we've only formatted it for virtio-blk-pci and
virtio-blk-ccw, but other virtio-blk devices also support
the corresponding option; moreover, we've always formatted
it for all virtio-scsi devices.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are several functions where we pointlessly duplicate
parts of the format string and pass the same arguments:
refactor them so that the common parts are formatted separately
from the variable parts.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1622455
If a domain is configured to use <source type='file'/> under
<memoryBacking/> we have to honour that setting and produce
-mem-path on the command line. We are not doing so if domain has
no guest NUMA nodes nor hugepages.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The function to retrieve the file system info using QEMU-GA is using
some conditionals to retrieve the info. This is wrong because the error
of some conditionals will be raised if VIR_STRDUP return errors and not
if some problem occurred with JSON.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This commit adds support to use the function qemuAgentGetHostname()
to obtain the domain hostname using QEMU-GA command.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This commit implements the function qemuAgentGetHostname() that uses
the QEMU guest agent command 'guest-get-host-name' to retrieve the
guest hostname of virtual machine running the QEMU-GA.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The struct is called virPCIDeviceAddress and the
functions operating on it should be named accordingly.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Commit f7b5566 added 'save_error' even though the function
already has 'originalError' used in the 'try_remove' section.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The size/capacity stats gathered in qemuDomainBlocksStatsGather when
using -blockdev would be overwritten by assigning/copying the transfered
data statistics at the end. Fix it by moving the assignment prior to
fetching the capacity data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
S390 is aware of both vfio-pci and vfio-ccw devices, so
on S390 the capability QEMU_CAPS_VFIO_PCI_DISPLAY will be
available. Add an extra check to make sure we only set the
display to off for vfio-pci mediated devices. Otherwise we
add display for vfio-ccw device and this breaks vfio-ccw
device qemu command line.
Fixes: d54e45b6e conf: Introduce new <hostdev> attribute 'display'
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Commit 6534b3c4 tried to raise an error when there is no numa
nodes by setting access='shared' in the domain config, but added
a helper called from qemuDomainDeviceDefValidate instead of a
helper called from qemuDomainDefValidate for XML:
<memoryBacking>
<hugepages/>
<access mode='shared'/>
</memoryBacking>
Since there are no memory devices in the test XML, there would
be no validation failure, but the test added was still failing.
Investigating that it turns out that unnecessary XML elements
were causing the failure (no need for <video>, <graphics>,
<pm>, usb controller model "piix3-uhci", disk attribute for
"discard='unmap'", <serial>, <console>, <channel> and a
memballoon model). Removing all those before moving the method
caused the test to succeed.
So this patch moves the validation to the right place and
removes all the unnecessary XML pieces that were causing
a false validation failure.
https://bugzilla.redhat.com/show_bug.cgi?id=1448149#c14
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
We would have used virtio for networking anyway, but it's
better to be explicit; for graphics, none of the existing
models work right now but virtio is the only one which
has a non-PCI variant, so it's as good a default as any
Spotted-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
None of the existing models is suitable for use with
RISC-V virt guests, and we don't want information about
the serial console to be missing from the XML.
The name is based on comments in qemu/hw/riscv/virt.c:
RISC-V machine with 16550a UART and VirtIO MMIO
and in qemu/hw/char/serial.c:
QEMU 16550A UART emulation
along with the output of dmesg in the guest:
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 13,
base_baud= 230400) is a 16550A
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The architecture is new enough that we don't need to
concern ourselves with backwards compatibility in any
capacity.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit 6700062 introduced a jump to error which skipped the
initialization of def:
qemu/qemu_parse_command.c:1870:9: error: variable 'def' is
used uninitialized whenever 'if' condition is true
[-Werror,-Wsometimes-uninitialized]
if (!(qemuCaps = virQEMUCapsCacheLookup(capsCache, progargv[0])))
Initialize def to fix this warning and qemuCaps, to prevent
a future error like this.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Historically the argv -> xml convertor wanted the same default machine
as we'd set when parsing xml. The latter has now changed, however, to
use a default defined by libvirt. The former needs fixing to again
honour the default QEMU machine.
This exposed a bug in handling for the aarch64 target, as QEMU does not
define any default machine. Thus we should not having been accepting
argv without a -machine provided.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virQEMUCapsGetDefaultMachine() method doesn't get QEMU's default
machine any more, instead it gets the historical default that libvirt
prefers for each arch. Rename it, so that the old name can be used for
getting QEMU's default.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We don't honour the QEMU default machine type anymore, always using the
libvirt chosen default instead. The QEMU argv parser, however, will need
to know the exacty QEMU default, so we must record that info.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The affected functions are
virDeviceInfoPCIAddressWanted()
virDeviceInfoPCIAddressPresent()
which get renamed to
virDeviceInfoPCIAddressIsWanted()
virDeviceInfoPCIAddressIsPresent()
to comply with the naming convention used for other
predicates.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This patch ensures that changes in attributes of interfaces will emit
errors except if they are missing from the XML.
Previously we were falsely reporting successful updates, because some
changed attributes got overwritten before the validity checks.
https://bugzilla.redhat.com/show_bug.cgi?id=1599513
Signed-off-by: Katerina Koukiou <kkoukiou@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemuProcessInitCpuAffinity prevents a VM from getting started on a
platform that uses cpu affinity wrapper stubs e.g. macOS.
The patch adds qemuProcessInitCpuAffinity stub on all platforms without
HAVE_SCHED_GETAFFINITY or HAVE_BSD_CPU_AFFINITY.
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The capability was usable since qemu 1.3 so we can remove all the
detection code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Allow mocking of the file descriptor numbers used for the TPM
passthrough mode by extracting the relevant code into an exported
function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
For versions where we can probe that the arguments are optional we can
perform the probing by a schema query rather than sending a separate
command to do so.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Add a new modifier character '*' which will select given schema entry
only when it is optional (denoted by the presence of the 'default' key).
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Split it into a function that returns the whole schema entry so that we
can do additional checks and a helper getting the type string from the
schema entry.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Introduce a few variables so that we can easily access the modifier
character and also don't have to do pointer arithmetic when selecting
the schema entries. This will simplify adding of new modifier
characters.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Extract the code used to probe for the functionality so that it does not
litter the code used for actual work.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Starting from qemu 2.7 the 'device' argument is in fact a name of the
job itself. Change our APIs accordingly and adjust the error message.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The API deals with a block job so use the common error reporting
function for it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Move all relevant APIs dealing with existing jobs together.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The API does not report any special job-related error so the generic
error function should be used.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Now that the job name is used in single place in the respective
functions remove the temporary strings.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Report the generic errors using the existing function so that we don't
reimplement the same functionality multiple times.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Both were removed prior to qemu v1.2.0-rc0 when switching to the new
error format where almost all error types were converted to GenericError.
Relevant qemu commits are <de253f14912e> and <df1e608a01eb0>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
We're going to need to assign virtio-mmio addresses to non-ARM
guests soon, so let's create a generic wrapper that calls to
the architecture-specific implementation.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
With the current implementation, adding a new architecture
and not updating preferredMachines accordingly will not
cause a build failure, making it very likely that subtle
bugs will be introduced in the process. Rework the code
so that such issues will be caught by the compiler.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
We should compare the alias/qdev id only when it was provided by the
caller and when it was found in the reply. Otherwise we could
dereference a NULL pointer. STRNEQ_NULLABLE is not appropriate since
it would return 'true' if the string was not present in the JSON output.
Found by Coverity.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
qemuDomainDiskGetBackendAlias allocates a copy of the nodename string so
we need to free it at the end.
Found by Coverity.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
qemuDomainDetachControllerDevice contained code which implied that alias
might be NULL when detaching the disk and tried to generate it. This is
no longer possible so we can remove the code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
It was found that in cases with host devices virProcessKillPainfully
might be able to send signal zero to the target PID for quite a while
with the process already being gone from /proc/<PID>.
That is due to cleanup and reset of devices which might include a
secondary bus reset that on top of the actions taken has a 1s delay
to let the bus settle. Due to that guests with plenty of Host devices
could easily exceed the default timeouts.
To solve that, this adds an extra delay of 2s per hostdev that is associated
to a VM.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Add code paths which call into the new functions to gather the data on a
per-node-name basis and tweak the aliases used for extracting the data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the 'qdev' instead of the disk alias to lookup the stats and
transfer the capacity from the appropriate node name so that the
function works with -blockdev.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Switch to using the QOM/qdev handles in all calls to
qemuMonitorGetBlockInfo when using -blockdev. The callers also need to
make sure to use the correct handle afterwards to extract the data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
With -blockdev qemu will not report any useful "device" for the data
returned by 'query-block'. We need to start using the 'qdev' field to do
so in cases when "device" is empty or it does not match the entry name.
This patch adds data for the 'qdev' field into the returned data
structure.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Data relevant for the storage of a backing chain member will need to be
reported separately when switching to blockdev. Prepare a function that
extracts the appropriate data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When reporting stats for the backing chain some of them make sense only
for the topmost entry as they are actually tied to the frontend device.
We unfortunately can't change that fact, but we can stop reporting all
zero stats for the backing chain members where they don't make any
sense.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While we report the read and written byte stats for every single layer
of the backing chain, qemu in fact reports them only for the frontend.
Split out the relevant stats into a separate function so that we can
later fix this bug and stop reporting it for backing chain entries where
they don't make sense.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Split out the header so that the loop can be refactored later.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Split out the code which converts the stats gathered in
qemuDomainGetStatsBlock into typed parameters so that it will look
less ugly when extending it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In cases when -blockdev is used we need to use 'query-named-block-nodes'
instead of 'query-block'. This means that we can extract the
write-threshold variable right away.
To keep compatibility with old VMs modify the code which was extracting
the value previously so that it updates the stats structure and a single
code path then can be used to extract the data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Allow reuse of qemuDomainGetStatsOneBlock to work with nodenames by
removing the code that looks up the stats data to the caller.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Disk image size data are not contained in the reply of query-blockstats
but need to be gathered from query-block. For use with -blockdev we
really need to call 'query-named-block-nodes' and process it to retrieve
the correct data.
This patch introduces qemuMonitorBlockStatsUpdateCapacityBlockdev which
updates the capacity data by nodename rather than device name.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For use with -blockdev we need to be able to retrieve the stats by
'qdev' for the frontend device stats since 'device' will be empty. Note
that for non-blockdev case qdev and 'device' with 'drive-' skipped would
be the same.
Additionally so that we can report the highest written offset we need to
also be able to access them by node-name for backing chain purposes.
In cases when 'device' is empty it does not make sense to gather them.
Allow arranging the stats simultaneously in all the above dimensions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rather than totalling every entry from 'query-block' for stats provided
by qemuDomainBlocksStatsGather total only stats for known disks. This
will allow to return data for nodenames and qdevs in the same hash so
that we can use them with -blockdev.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The string is not modified so it does not make sense to have a copy.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the new APIs which allow to manipulate the tray and media separately
and also allow using a nodename to refer to a media to implement media
changing.
With the new approach we don't have to call eject twice as the media is
removed by calling qemuMonitorBlockdevMediumRemove.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
