When the default cpuset or automatic numa placement is used libvirt
would place the whole parent cgroup in the specified cpuset. This then
disallowed to re-pin the vcpus to a different cpu.
This patch pins only the vcpu threads to the default cpuset and thus
allows to re-pin them later.
The following config would fail to start:
<domain type='kvm'>
...
<vcpu placement='static' cpuset='0-1' current='2'>4</vcpu>
<cputune>
<vcpupin vcpu='0' cpuset='2-3'/>
...
This is a regression since a39f69d2b.
When the synchronous pivot option is selected, libvirt would not update
the backing chain until the job was exitted. Some applications then
received invalid data as their job serialized first.
This patch removes polling to wait for the ABORT/PIVOT job completion
and replaces it with a condition. If a synchronous operation is
requested the update of the XML is executed in the job of the caller of
the synchronous request. Otherwise the monitor event callback uses a
separate worker to update the backing chain with a new job.
This is a regression since 1a92c71910
When the ABORT job is finished synchronously you get the following call
stack:
#0 qemuBlockJobEventProcess
#1 qemuDomainBlockJobImpl
#2 qemuDomainBlockJobAbort
#3 virDomainBlockJobAbort
While previously or while using the _ASYNC flag you'd get:
#0 qemuBlockJobEventProcess
#1 processBlockJobEvent
#2 qemuProcessEventHandler
#3 virThreadPoolWorker
Later on I'll be adding a condition that will allow to synchronise a
SYNC block job abort. The approach will require this code to be called
from two different places so it has to be extracted into a helper.
Commit 1a92c719 moved code to handle block job events to a different
function that is executed in a separate thread. The caller of
processBlockJob handles locking and unlocking of @vm, so the we should
not do it in the function itself.
The block copy API takes the speed in bytes/s rather than MiB/s that was
the prior approach in virDomainBlockRebase. We correctly converted the
speed to bytes/s in the old API but we still called the common helper
virDomainBlockCopyCommon with the unadjusted variable.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1207122
When getting info on NUMA parameters for domain,
virCgroupGetCpusetMems() may be called. However, as of 43b67f2e
the call is guarded by check if memory controller is present.
Even though it may be not obvious instantly, NUMA parameters are
stored under cpuset controller. Therefore the check needs to look
like this:
if (!virCgroupHasController(priv->cgroup,
VIR_CGROUP_CONTROLLER_CPUSET) ||
virCgroupGetCpusetMems(priv->cgroup, &nodeset) < 0) {
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Blockcopy to non-file destination is not supported according the code,
but a 'goto endjob' is missed after checking the destination.
This leads to calling drive-mirror with wrong parameters.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1206406
Signed-off-by: Shanzhi Yu <shyu@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Starting a qemu VM with a memory module that has the base address
specified results in the following error:
error: internal error: early end of file from monitor: possible problem:
2015-03-26T03:45:52.338891Z qemu-kvm: -device pc-dimm,node=0,memdev=memdimm0,
id=dimm0,slot=0,base=4294967296: Property '.base' not found
The correct property name for the base address is 'addr'.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Because of the microcode update to Haswell/Broadwell CPUs, existing
domains using these CPUs may fail to start even though they used to run
just fine. To help users solve this issue we try to suggest switching to
-noTSX variant of the CPU model:
virsh # start cd
error: Failed to start domain cd
error: unsupported configuration: guest and host CPU are not
compatible: Host CPU does not provide required features: rtm, hle;
try using 'Haswell-noTSX' CPU model
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Use the virStorageSourceIsEmpty helper to determine whether the drive
source is empty rather than checking for src->path. This will fix start
of VM with empty network cdrom that would not report any error.
The function that formats the string for network drives would return
error code but did not set the error message when called on storage
source with VIR_STORAGE_NET_PROTOCOL_LAST or _NONE.
Report an error in this case if it would ever be called in that way.
While adding tests for status XML parsing and formatting I've noticed
that the device alias list is leaked.
==763001== 81 (48 direct, 33 indirect) bytes in 1 blocks are definitely lost in loss record 414 of 514
==763001== at 0x4C2B8F0: calloc (vg_replace_malloc.c:623)
==763001== by 0x6ACF70F: virAllocN (viralloc.c:191)
==763001== by 0x447B64: qemuDomainObjPrivateXMLParse (qemu_domain.c:727)
==763001== by 0x6B848F9: virDomainObjParseXML (domain_conf.c:15491)
==763001== by 0x6B84CAC: virDomainObjParseNode (domain_conf.c:15608)
When starting a VM with hotpluggable memory devices the user may specify
an invalid source NUMA node. Libvirt would pass through the error from
qemu:
# virsh start test3
error: Failed to start domain test3
error: internal error: process exited while connecting to monitor:
2015-03-25T01:12:17.205913Z qemu-kvm: -object memory-backend-ram,id=memdimm0
,size=536870912,host-nodes=1-3,policy=bind: cannot bind memory to host NUMA nodes:
Invalid argument
This patch adds a check that allows to report better error:
# virsh start test3
error: Failed to start domain test3
error: configuration unsupported: NUMA node 1 is unavailable
Signed-off-by: Luyao Huang <lhuang@redhat.com>
This is very helpful when we want to log and report why we could not
acquire a state change lock. Reporting what job keeps it locked helps
with understanding the issue. Moreover, after calling
virDomainGetControlInfo, it's possible to tell whether libvirt is just
stuck somewhere within the API (or it just forgot to cleanup the job) or
whether libvirt is waiting for QEMU to reply.
The error message will look like the following:
# virsh resume cd
error: Failed to resume domain cd
error: Timed out during operation: cannot acquire state change lock
(held by remoteDispatchDomainSuspend)
https://bugzilla.redhat.com/show_bug.cgi?id=853839
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
We don't have to modify cpuset.mems on hosts without NUMA. It also
fixes an error message that you get instead of success if you trying
update vcpus of a guest on a host without NUMA.
error: internal error: NUMA isn't available on this host
Signer-off-by: Pavel Hrdina <phrdina@redhat.com>
We should call virDomainLiveConfigHelperMethod ASAP because this
function transfers VIR_DOMAIN_AFFECT_CURRENT to VIR_DOMAIN_AFFECT_LIVE
or VIR_DOMAIN_AFFECT_CONFIG. All other additional checks for those two
flags should consider that the user give us VIR_DOMAIN_AFFECT_CURRENT.
Remove the unnecessary check whether the domain is live in case of
VIR_DOMAIN_VCPU_GUEST because this check is done by
virDomainLiveConfigHelperMethod.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
by rewriting it completely from:
error: unsupported configuration: virtio only support device address
type 'PCI'
to:
error: unsupported configuration: virtio disk cannot have an address of type
drive
Since we now support CCW addresses as well.
While debugging the support for responding to qemu RX_FILTER_CHANGED
events, I had changed the "ignoring this event" log message from
VIR_DEBUG to VIR_WARN, but forgot to change it back before
pushing. Since many guest OSes make enough changes to multicast lists
and/or promiscuous mode settings to trigger this message, it's
starting to show up as a red herring in bug reports.
Add a few helpers that allow to operate with memory device definitions
on the domain config and use them to implement memory device coldplug in
the qemu driver.
Add support to start qemu instance with 'pc-dimm' device. Thanks to the
refactors we are able to reuse the existing function to determine the
parameters.
Make sure that libvirt has all vital information needed to reliably
represent configuration of guest's memory devices in case of a
migration.
This patch forbids migration in case the required slot number and module
base address are not present (failed to be loaded from qemu via
monitor).
When using 'dimm' memory devices with qemu, some of the information
like the slot number and base address need to be reloaded from qemu
after process start so that it reflects the actual state. The state then
allows to use memory devices across migrations.
This patch adds code that parses and formats configuration for memory
devices.
A simple configuration would be:
<memory model='dimm'>
<target>
<size unit='KiB'>524287</size>
<node>0</node>
</target>
</memory>
A complete configuration of a memory device:
<memory model='dimm'>
<source>
<pagesize unit='KiB'>4096</pagesize>
<nodemask>1-3</nodemask>
</source>
<target>
<size unit='KiB'>524287</size>
<node>1</node>
</target>
</memory>
This patch preemptively forbids use of the <memory> device in individual
drivers so the users are warned right away that the device is not
supported.
To enable memory hotplug the maximum memory size and slot count need to
be specified. As qemu supports now other units than mebibytes when
specifying memory, use the new interface in this case.
Add a XML element that will allow to specify maximum supportable memory
and the count of memory slots to use with memory hotplug.
To avoid possible confusion and misuse of the new element this patch
also explicitly forbids the use of the maxMemory setting in individual
drivers's post parse callbacks. This limitation will be lifted when the
support is implemented.
In the last section if the function determines that the config is
invalid when QEMU doesn't support the memory device the JSON config
object would be returned even if it doesn't make sense.
Assign the object to be returned only on success.
When no model is specified in the domain definition for
a scsi controller and the architectur is s390 than virtio-scsi
is set as default model.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Daniel Hansel <daniel.hansel@linux.vnet.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.vnet.ibm.com>
Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit cf54c60699 introduced the ability
to create missing storage volumes during migration. For network disks,
however, we may not necessarily be able to detect whether they already
exist -- there is no straight-forward way to map the disk to a storage
volume, and even if there were it's possible no configured storage pool
actually contains the disk.
It is better to assume the network disk exists in this case, rather than
aborting the migration completely. If the volume really is missing, QEMU
will generate an appropriate error later in the migration.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
Wikipedia's list of common misspellings [1] has a machine-readable
version. This patch fixes those misspellings mentioned in the list
which don't have multiple right variants (as e.g. "accension", which can
be both "accession" and "ascension"), such misspellings are left
untouched. The list of changes was manually re-checked for false
positives.
[1] https://en.wikipedia.org/wiki/Wikipedia:Lists_of_common_misspellings/For_machines
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
We've never set the cpuset.memory_migrate value to anything, keeping it
on default. However, we allow changing cpuset.mems on live domain.
That setting, however, don't have any consequence on a domain unless
it's going to allocate new memory.
I managed to make 'virsh numatune' move all the memory to any node I
wanted even without disabling libnuma's numa_set_membind(), so this
should be safe to use with it as well.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1198497
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1196934
When qemu exits during startup, libvirt includes the error from
/var/log/libvirt/qemu/vm.log in the error message:
$ virsh start test3
error: Failed to start domain test3
error: internal error: early end of file from monitor: possible problem:
2015-02-27T03:03:16.985494Z qemu-kvm: -numa memdev is not supported by
machine rhel6.5.0
The check for domain liveness added to qemuDomainObjExitMonitor
in commit dc2fd51f sometimes overwrites this error:
$ virsh start test3
error: Failed to start domain test3
error: operation failed: domain is no longer running
Fix the check to only report an error if there is none set.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Issue #1 - A call to virBitmapNew did not check if the allocation
failed which could lead to a NULL dereference
Issue #2 - When deleting the pin entries from the config file, the
code loops from the number of elements down to the "new" vcpu count;
however, the pin id values are numbered 0..n-1 not 1..n, so the "first"
pin attempt would never work. Luckily the check was for whether the
incoming 'n' (vcpu id) matched the entry in the array from 0..arraysize
rather than a dereference of the 'n' entry
In qemu 2.3, the migration status will include 'cancelling' in the
window between when an asynchronous cancel has been requested and
when the migration is actually halted. Previously, qemu hid this
state and reported 'active'. Libvirt manages the sequence okay
even when the string is unrecognized (that is, it will report an
unknown state:
Migration: [ 69 %]^Cerror: internal error: unexpected migration status in cancelling.
but the migration is still cancelled), but recognizing the string
makes for a smoother user experience.
* src/qemu/qemu_monitor.h
(QEMU_MONITOR_MIGRATION_STATUS_CANCELLING): Add enum.
* src/qemu/qemu_monitor.c (qemuMonitorMigrationStatus): Map it.
* src/qemu/qemu_migration.c (qemuMigrationUpdateJobStatus): Adjust
clients.
* src/qemu/qemu_monitor_json.c
(qemuMonitorJSONGetMigrationStatusReply): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
virnetdevopenvswitch.h declares a few functions that can be called to
add ports to and remove them from OVS bridges, and retrieve the
migration data for a port. It does not contain any data definitions
that are used by domain_conf.h. But for some reason, domain_conf.h
virnetdevopenvswitch.h should be directly #including it. This adds a
few lines to the project, but saves all the files that don't need it
from the extra computing, and makes the dependencies more clear cut.
Problem Description:
When we set boot order for a vhost-user network interface, we found the boot index
doesn't work.
Cause of the Problem:
In the function qemuBuildVhostuserCommandLine(), it forcely set the arg bootindex of
function qemuBuildNicDevStr() to 0. Thus, the bootindex parameter got missing.
Solution:
Trans the arg bootindex down.
Signed-off-by: Gao Haifeng <gaohaifeng.gao@huawei.com>
Signed-off-by: Zhang Bo <oscar.zhangbo@huawei.com>
When libvirt is starting a domain, it reports the state as SHUTOFF until
it's RUNNING. This is not ideal because domain startup may take a long
time (usually because of some configuration issues, firewalls blocking
access to network disks, etc.) and domain lists provided by libvirt look
awkward. One can see weird shutoff domains with IDs in a list of active
domains or even shutoff transient domains. In any case, it looks more
like a bug in libvirt than a normal state a domain goes through.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The function needs a pointer to the network to get list of DHCP
leases. The pointer is obtained via virNetworkLookupByName() which
requires callers to free the returned network once no longer needed.
Otherwise it's leaked.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Now that we allow HW address to be not present on our RPC layer,
don't error out if qemu-ga hasn't provided any.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1199182 documents that
after a series of disk snapshots into existing destination images,
followed by active commits of the top image, it is possible for
qemu 2.2 and earlier to end up tracking a different name for the
image than what it would have had when opening the chain afresh.
That is, when starting with the chain 'a <- b <- c', the name
associated with 'b' is how it was spelled in the metadata of 'c',
but when starting with 'a', taking two snapshots into 'a <- b <- c',
then committing 'c' back into 'b', the name associated with 'b' is
now the name used when taking the first snapshot.
Sadly, older qemu doesn't know how to treat different spellings of
the same filename as identical files (it uses strcmp() instead of
checking for the same inode), which means libvirt's attempt to
commit an image using solely the names learned from qcow2 metadata
fails with a cryptic:
error: internal error: unable to execute QEMU command 'block-commit': Top image file /tmp/images/c/../b/b not found
even though the file exists. Trying to teach libvirt the rules on
which name qemu will expect is not worth the effort (besides, we'd
have to remember it across libvirtd restarts, and track whether a
file was opened via metadata or via snapshot creation for a given
qemu process); it is easier to just always directly ask qemu what
string it expects to see in the first place.
As a safety valve, we validate that any name returned by qemu
still maps to the same local file as we have tracked it, so that
a compromised qemu cannot accidentally cause us to act on an
incorrect file.
* src/qemu/qemu_monitor.h (qemuMonitorDiskNameLookup): New
prototype.
* src/qemu/qemu_monitor_json.h (qemuMonitorJSONDiskNameLookup):
Likewise.
* src/qemu/qemu_monitor.c (qemuMonitorDiskNameLookup): New function.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONDiskNameLookup)
(qemuMonitorJSONDiskNameLookupOne): Likewise.
* src/qemu/qemu_driver.c (qemuDomainBlockCommit)
(qemuDomainBlockJobImpl): Use it.
Signed-off-by: Eric Blake <eblake@redhat.com>
