Add the secret object so the 'passwordid=' can be added if the command line
if there's a secret defined in/on the host for TCP chardev TLS objects.
Preparation for the secret involves adding the secinfo to the char source
device prior to command line processing. There are multiple possibilities
for TCP chardev source backend usage.
Add test for at least a serial chardev as an example.
Add in the block I/O throttling length/duration parameter to the command
line if supported. If not supported, fail command creation.
Add the xml2argvtest for testing.
Add an optional "tls='yes|no'" attribute for a TCP chardev.
For QEMU, this will allow for disabling the host config setting of the
'chardev_tls' for a domain chardev channel by setting the value to "no" or
to attempt to use a host TLS environment when setting the value to "yes"
when the host config 'chardev_tls' setting is disabled, but a TLS environment
is configured via either the host config 'chardev_tls_x509_cert_dir' or
'default_tls_x509_cert_dir'
Signed-off-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
There was inconsistency between alias used to create tls-creds-x509
object and alias used to link that object to chardev while hotpluging.
Hotplug ends with this error:
error: Failed to detach device from channel-tcp.xml
error: internal error: unable to execute QEMU command 'chardev-add':
No TLS credentials with id 'objcharchannel3_tls0'
In XML we have for example alias "serial0", but on qemu command line we
generate "charserial0".
The issue was that code, that creates QMP command to hotplug chardev
devices uses only the second alias "charserial0" and that alias is also
used to link the tls-creds-x509 object.
This patch unifies the aliases for tls-creds-x509 to be always generated
from "charserial0".
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The code is entirely correct, but it still managed to trip me
up when I first ran into it because I did not realize right away
that VIR_PCI_CONNECT_TYPES_ENDPOINT was not a single flag, but
rather a mask including both VIR_PCI_CONNECT_TYPE_PCI_DEVICE and
VIR_PCI_CONNECT_TYPE_PCIE_DEVICE.
In order to save the next distracted traveler in PCI Address Land
some time, document this fact with a comment. Add a test case for
the behavior as well.
https://bugzilla.redhat.com/show_bug.cgi?id=1366505
So far, this function lacked support for
VIR_DOMAIN_NET_TYPE_VHOSTUSER leaving callers to hack around the
problem by constructing the command line on their own. This is
not ideal as it blocks hot plug support.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Currently, what we do for vhost-user network is generate the
following part of command line:
-netdev type=vhost-user,id=hostnet0,chardev=charnet0
There's no need for 'type=' it is the default. Drop it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The idea is to have function that does some checking of the
arguments at its beginning and then have one big switch for all
the interface types it supports. Each one of them generating the
corresponding part of the command line.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The idea is to have function that does some checking of the
arguments at its beginning and then have one big switch for all
the interface types it supports. Each one of them generating the
corresponding part of the command line.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This improves commit 706b5b6277 in a way that we check qemu capabilities
instead of what architecture we are running on to detect whether we can
use *virtio-vga* model or not. This is not a case only for arm/aarch64.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This patch simplifies QEMU capabilities for QXL video device. QEMU
exposes this device as *qxl-vga* and *qxl* and they are both the same
device with the same set of parameters, the only difference is that
*qxl-vga* includes VGA compatibility.
Based on QEMU code they are tied together so it's safe to check only for
presence of only one of them.
This patch also removes an invalid test case "video-qxl-sec-nodevice"
where there is only *qxl-vga* device and *qxl* device is not present.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
If one of QEMU_CAPS_DEVICE_QXL_VGA or QEMU_CAPS_DEVICE_QXL is set the
other one will always be set as well because both devices are tied
together in QEMU.
The change of args files is caused by the presence of capability
QEMU_CAPS_DEVICE_VIDEO_PRIMARY which means it's safe to use
"-device qxl-vga" instead of "-vga qxl", see commit (e3f2686b) and
by the fact that if QEMU_CAPS_VGA_QXL is set QEMU_CAPS_DEVICE_QXL_VGA
and QEMU_CAPS_DEVICE_QXL would be set too (since we support only qemu
with "-device" option).
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The intel-iommu device has existed since QEMU 2.2.0, but
it was only possible to create it with -device since
QEMU 2.7.0, thanks to:
commit 621d983a1f9051f4cfc3f402569b46b77d8449fc
Author: Marcel Apfelbaum <marcel@redhat.com>
Date: Mon Jun 27 18:38:34 2016 +0300
hw/iommu: enable iommu with -device
Use the standard '-device intel-iommu' to create the IOMMU device.
The legacy '-machine,iommu=on' can still be used.
The libvirt capability check & command line formatting code
is thus broken for all QEMU versions 2.2.0 -> 2.6.0 inclusive.
This fixes it to use iommu=on instead.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
We're about to add 6 new options and it appears (from testing) one cannot
utilize both the shorthand (alias) and (much) longer names for the arguments.
So modify the command builder to use the longer name and of course alter the
test output .args to have the similarly innocuous long name.
Also utilize a macro to build that name makes it so much more visually
appealing and saves a few characters or potential cut-n-paste issues.
Signed-off-by: John Ferlan <jferlan@redhat.com>
It was missing... Also since I'm using the soft link from qemuxml2xmloutdata
to the qemuxml2argvdata file, modify the output file to have the necessary
<address> elements plus the mouse and keyboard.
Signed-off-by: John Ferlan <jferlan@redhat.com>
If this reminds you of a commit message from around a year ago, it's
41c2aa729f and yes, we're dealing with
"the same thing" again. Or f309db1f4d and
it's similar.
There is a logic in place that if there is no real need for
memory-backend-file, qemuBuildMemoryBackendStr() returns 0. However
that wasn't the case with hugepage backing. The reason for that was
that we abused the 'pagesize' variable for storing that information, but
we should rather have a separate one that specifies whether we really
need the new object for hugepage backing. And that variable should be
set only if this particular NUMA cell needs special treatment WRT
hugepages.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1372153
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The x86 CPU driver translated each CPU definition from domain XML into
CPUID data and then back to CPU definition. This effectively sorted the
list of CPU features according to their CPUID values. Since this is
going to change, we need to reorder CPU features in a few test files to
make sure the generated QEMU command lines will not change.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Adding x86 CPU models into a list of supported CPUs for non-x86
architectures is not a very good idea. Each architecture we test needs
to maintain its own list of supported CPU models.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Most of QEMU's PCI display device models, such as:
libvirt video/model/@type QEMU -device
------------------------- ------------
cirrus cirrus-vga
vga VGA
qxl qxl-vga
virtio virtio-vga
come with a linear framebuffer (sometimes called "VGA compatibility
framebuffer"). This linear framebuffer lives in one of the PCI device's
MMIO BARs, and allows guest code (primarily: firmware drivers, and
non-accelerated OS drivers) to display graphics with direct memory access.
Due to architectural reasons on aarch64/KVM hosts, this kind of
framebuffer doesn't / can't work in
qemu-system-(arm|aarch64) -M virt
machines. Cache coherency issues guarantee a corrupted / unusable display.
The problem has been researched by several people, including kvm-arm
maintainers, and it's been decided that the best way (practically the only
way) to have boot time graphics for such guests is to consolidate on
QEMU's "virtio-gpu-pci" device.
>From <https://bugzilla.redhat.com/show_bug.cgi?id=1195176>, libvirt
supports
<devices>
<video>
<model type='virtio'/>
</video>
</devices>
but libvirt unconditionally maps @type='virtio' to QEMU's "virtio-vga"
device model. (See the qemuBuildDeviceVideoStr() function and the
"qemuDeviceVideo" enum impl.)
According to the above, this is not right for the "virt" machine type; the
qemu-system-(arm|aarch64) binaries don't even recognize the "virtio-vga"
device model (justifiedly). Whereas "virtio-gpu-pci", which is a pure
virtio device without a compatibility framebuffer, is available, and works
fine.
(The ArmVirtQemu ("AAVMF") platform of edk2 -- that is, the UEFI firmware
for "virt" -- supports "virtio-gpu-pci", as of upstream commit
3ef3209d3028. See
<https://tianocore.acgmultimedia.com/show_bug.cgi?id=66>.)
Override the default mapping of "virtio", from "virtio-vga" to
"virtio-gpu-pci", if qemuDomainMachineIsVirt() evaluates to true.
Cc: Andrea Bolognani <abologna@redhat.com>
Cc: Drew Jones <drjones@redhat.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Martin Kletzander <mkletzan@redhat.com>
Suggested-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1372901
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Martin Kletzander <mkletzan@redhat.com>
The test qemuxml2argv-serial-tcp-tlsx509-chardev.args
will fail if libvirt is built with a --sysconfdir
arg that is not /etc. Fix this by setting a hardcoded
path in the test code.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When building a chardev device string for tcp, add the necessary pieces to
access provide the TLS X.509 path to qemu. This includes generating the
'tls-creds-x509' object and then adding the 'tls-creds' parameter to the
VIR_DOMAIN_CHR_TYPE_TCP command line.
Finally add the tests for the qemu command line. This test will make use
of the "new(ish)" /etc/pki/qemu setting for a TLS certificate environment
by *not* "resetting" the chardevTLSx509certdir prior to running the test.
Also use the default "verify" option (which is "no").
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add a new TLS X.509 certificate type - "chardev". This will handle the
creation of a TLS certificate capability (and possibly repository) for
properly configured character device TCP backends.
Unlike the vnc and spice there is no "listen" or "passwd" associated. The
credentials eventually will be handled via a libvirt secret provided to
a specific backend.
Make use of the default verify option as well.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add support for using the new approach to hotplug vcpus using device_add
during startup of qemu to allow sparse vcpu topologies.
There are a few limitations imposed by qemu on the supported
configuration:
- vcpu0 needs to be always present and not hotpluggable
- non-hotpluggable cpus need to be ordered at the beginning
- order of the vcpus needs to be unique for every single hotpluggable
entity
Qemu also doesn't really allow to query the information necessary to
start a VM with the vcpus directly on the commandline. Fortunately they
can be hotplugged during startup.
The new hotplug code uses the following approach:
- non-hotpluggable vcpus are counted and put to the -smp option
- qemu is started
- qemu is queried for the necessary information
- the configuration is checked
- the hotpluggable vcpus are hotplugged
- vcpus are started
This patch adds a lot of checking code and enables the support to
specify the individual vcpu element with qemu.
https://bugzilla.redhat.com/show_bug.cgi?id=1182074
Since libvirt still uses a legacy qemu arg format to add a disk, the
manner in which the 'password-secret' argument is passed to qemu needs
to change to prepend a 'file.' If in the future, usage of the more
modern disk format, then the prepended 'file.' can be removed.
Fix based on Jim Fehlig <jfehlig@suse.com> posting and subsequent
upstream list followups, see:
http://www.redhat.com/archives/libvir-list/2016-August/msg00777.html
for details. Introduced by commit id 'a1344f70'.
If any of the devices referenced a USB hub that does not exist,
defining the domain would either fail with:
error: An error occurred, but the cause is unknown
(if only the last hub in the path is missing)
or crash.
Return a proper error instead of crashing.
https://bugzilla.redhat.com/show_bug.cgi?id=1367130
More misunderstanding/mistaken assumptions on my part - I had thought
that a pci-expander-bus could be plugged into any legacy PCI slot, and
that pcie-expander-bus could be plugged into any PCIe slot. This isn't
correct - they can both be plugged ontly into their respective root
buses. This patch adds that restriction.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1358712
libvirt had allowed a dmi-to-pci-bridge to be plugged in anywhere a
normal PCIe endpoint can be connected, but this is wrong - it will
only work if it's plugged into pcie-root (the PCIe root complex) or a
pcie-expander-bus (the qemu device pxb-pcie). This patch adjusts the
connection flags accordingly.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1363648
Since the introduction of CMT features (commit v1.3.5-461-gf294b83)
starting a domain with host-model CPU on a host which supports CMT fails
because QEMU complains about unknown 'cmt' feature:
qemu-system-x86_64: CPU feature cmt not found
https://bugzilla.redhat.com/show_bug.cgi?id=1355857
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The generated command line wouldn't work since QEMU doesn't know what
'cmt' is. The following patch will fix this issue.
https://bugzilla.redhat.com/show_bug.cgi?id=1355857
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
In qemu, enabling this feature boils down to adding the following
onto the command line:
-global driver=cfi.pflash01,property=secure,value=on
However, there are some constraints resulting from the
implementation. For instance, System Management Mode (SMM) is
required to be enabled, the machine type must be q35-2.4 or
later, and the guest should be x86_64. While technically it is
possible to have 32 bit guests with secure boot, some non-trivial
CPU flags tuning is required (for instance lm and nx flags must
be prohibited). Given complexity of our CPU driver, this is not
trivial. Therefore I've chosen to forbid 32 bit guests for now.
If there's ever need, we can refine the check later.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This element will control secure boot implemented by some
firmwares. If the firmware used in <loader/> does support the
feature we must tell it to the underlying hypervisor. However, we
can't know whether loader does support it or not just by looking
at the file. Therefore we have to have an attribute to the
element where users can tell us whether the firmware is secure
boot enabled or not.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Since its release of 2.4.0 qemu is able to enable System
Management Module in the firmware, or disable it. We should
expose this capability in the XML. Unfortunately, there's no good
way to determine whether the binary we are talking to supports
it. I mean, if qemu's run with real machine type, the smm
attribute can be seen in 'qom-list /machine' output. But it's not
there when qemu's run with -M none. Therefore we're stuck with
version based check.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1356937
Add the definitions to allow for viewing/setting cgroup period and quota
limits for IOThreads.
This is similar to the work done for emulator quota and period by
commit ids 'b65dafa' and 'e051c482'.
Being able to view/set the IOThread specific values is related to more
recent changes adding global period (commmit id '4d92d58f') and global
quota (commit id '55ecdae') definitions and qemu support (commit id
'4e17ff79' and 'fbcbd1b2'). With a global setting though, if somehow
the IOThread value in the cgroup hierarchy was set "outside of libvirt"
to a value that is incompatible with the global value.
Allowing control over IOThread specific values provides the capability
to alter the IOThread values as necessary.
The current LUKS support has a "luks" volume type which has
a "luks" encryption format.
This partially makes sense if you consider the QEMU shorthand
syntax only requires you to specify a format=luks, and it'll
automagically uses "raw" as the next level driver. QEMU will
however let you override the "raw" with any other driver it
supports (vmdk, qcow, rbd, iscsi, etc, etc)
IOW the intention though is that the "luks" encryption format
is applied to all disk formats (whether raw, qcow2, rbd, gluster
or whatever). As such it doesn't make much sense for libvirt
to say the volume type is "luks" - we should be saying that it
is a "raw" file, but with "luks" encryption applied.
IOW, when creating a storage volume we should use this XML
<volume>
<name>demo.raw</name>
<capacity>5368709120</capacity>
<target>
<format type='raw'/>
<encryption format='luks'>
<secret type='passphrase' uuid='0a81f5b2-8403-7b23-c8d6-21ccd2f80d6f'/>
</encryption>
</target>
</volume>
and when configuring a guest disk we should use
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/home/berrange/VirtualMachines/demo.raw'/>
<target dev='sda' bus='scsi'/>
<encryption format='luks'>
<secret type='passphrase' uuid='0a81f5b2-8403-7b23-c8d6-21ccd2f80d6f'/>
</encryption>
</disk>
This commit thus removes the "luks" storage volume type added
in
commit 318ebb36f1
Author: John Ferlan <jferlan@redhat.com>
Date: Tue Jun 21 12:59:54 2016 -0400
util: Add 'luks' to the FileTypeInfo
The storage file probing code is modified so that it can probe
the actual encryption formats explicitly, rather than merely
probing existance of encryption and letting the storage driver
guess the format.
The rest of the code is then adapted to deal with
VIR_STORAGE_FILE_RAW w/ VIR_STORAGE_ENCRYPTION_FORMAT_LUKS
instead of just VIR_STORAGE_FILE_LUKS.
The commit mentioned above was included in libvirt v2.0.0.
So when querying volume XML this will be a change in behaviour
vs the 2.0.0 release - it'll report 'raw' instead of 'luks'
for the volume format, but still report 'luks' for encryption
format. I think this change is OK because the storage driver
did not include any support for creating volumes, nor starting
guets with luks volumes in v2.0.0 - that only since then.
Clearly if we change this we must do it before v2.1.0 though.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To allow using failover with gluster it's necessary to specify multiple
volume hosts. Add support for starting qemu with such configurations.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
When parsing a command line with USB devices that have
no address specified, QEMU automatically adds a USB hub
if the device would fill up all the available USB ports.
To help most of the users, add one hub if there are more
USB devices than available ports. For wilder configurations,
expect the user to provide us with more hubs and/or controllers.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1301021
Generate the luks command line using the AES secret key to encrypt the
luks secret. A luks secret object will be in addition to a an AES secret.
For hotplug, check if the encinfo exists and if so, add the AES secret
for the passphrase for the secret object used to decrypt the device.
Modify/augment the fakeSecret* in qemuxml2argvtest in order to handle
find a uuid or a volume usage with a specific path prefix in the XML
(corresponds to the already generated XML tests). Add error message
when the 'usageID' is not 'mycluster_myname'. Commit id '1d632c39'
altered the error message generation to rely on the errors from the
secret_driver (or it's faked replacement).
Add the .args output for adding the LUKS disk to the domain
Signed-off-by: John Ferlan <jferlan@redhat.com>
We were requiring a USB port path in the schema, but not enforcing it.
Omitting the USB port would lead to libvirt formatting it as (null).
Such domain cannot be started and will disappear after libvirtd restart
(since it cannot parse back the XML).
Only format the port if it has been specified and mark it as optional
in the XML schema.
Commit id's '9bbf0d7e6' and '2552fec24' added some XML parsing tests
for a LUKS volume to use a 'passphrase' secret format. After commit,
this was deemed to be incorrect, so covert the various tests to use
the volume usage format where the 'usage' is the path to the volume
rather than a user defined name string.
Also, removed the qemuxml2argv-luks-disk-cipher.xml since it was
just a duplicate of qemuxml2argv-luks-disks.xml.
Signed-off-by: John Ferlan <jferlan@redhat.com>
This makes the search for related XMLs easier, plus they are not used in
the xml2argv tests anyway. This also makes future patches cleaner.
While on that remove unnecessary '-hotplug' from the filenames.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This is preferrable to -nographic which (in addition to disabling
graphics output) redirects the serial port to stdio and on OpenBIOS
enables the firmware's serial console.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For type='ethernet' interfaces only.
(This patch had been pushed earlier in
commit 0b4645a7e0, but was reverted in
commit 84d47a3cce because it had been
accidentally pushed during the freeze for release 2.0.0)
In order to use more common code and set up for a future type, modify the
encryption secret to allow the "usage" attribute or the "uuid" attribute
to define the secret. The "usage" in the case of a volume secret would be
the path to the volume as dictated by the backwards compatibility brought
on by virStorageGenerateQcowEncryption where it set up the usage field as
the vol->target.path and didn't allow someone to provide it. This carries
into virSecretObjListFindByUsageLocked which takes the secret usage attribute
value from from the domain disk definition and compares it against the
usage type from the secret definition. Since none of the code dealing
with qcow/qcow2 encryption secrets uses usage for lookup, it's a mostly
cosmetic change. The real usage comes in a future path where the encryption
is expanded to be a luks volume and the secret will allow definition of
the usage field.
This code will make use of the virSecretLookup{Parse|Format}Secret common code.
Signed-off-by: John Ferlan <jferlan@redhat.com>
I'm not sure why our code claimed "-boot menu=on" cannot be used in
combination with per-device bootindex, but it was proved wrong about
four years ago by commit 8c952908. Let's always use bootindex when QEMU
supports it.
https://bugzilla.redhat.com/show_bug.cgi?id=1323085
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Verify that SCSI controllers get created automatically when a SCSI disk
is hot-plugged to a domain that doesn't have a matching SCSI controller
defined already.
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Make them work again... The xml2xml had been working, but the xml2argv
were not working. Making the xml2argv work required a few adjustments to
the xml to update to more recent times.
Signed-off-by: John Ferlan <jferlan@redhat.com>
The '-usb' option doesn't have any effect for aarch64 mach-virt
guests, so the fact that it's currently enabled by default is not
really causing any issue.
However, that might change in the future (although unlikely), and
having it as part of the QEMU command line can cause confusion to
someone looking through the process list.
Avoid it completely, like it's already happening for q35.
There has been some progress lately in enabling virtio-pci on
aarch64 guests; however, guest OS support is still spotty at best,
so most guests are going to be using virtio-mmio instead.
Currently, mach-virt guests are closely modeled after q35 guests,
and that includes always adding a dmi-to-pci-bridge that's just
impossible to get rid of. While that's acceptable (if suboptimal)
for q35, where you will always need some kind of PCI device anyway,
mach-virt guests should be allowed to avoid it.
Until now, a Q35 domain (or arm/virt, or any other domain that has a
pcie-root bus) would always have a pci-bridge added, so that there
would be a hotpluggable standard PCI slot available to plug in any PCI
devices that might be added. This patch removes the explicit add,
instead relying on the pci-bridge being auto-added during PCI address
assignment (it will add a pci-bridge if there are no free slots).
This doesn't eliminate the dmi-to-pci-bridge controller that is
explicitly added whether or not a standard PCI slot is required (and
that is almost never used as anything other than a converter between
pcie.0's PCIe slots and standard PCI). That will be done separately.
This option allows or disallows detection of zero-writes if it is set to
"on" or "off", respectively. It can be also set to "unmap" in which
case it will try discarding that part of image based on the value of the
"discard" option.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This new listen type is currently supported only by spice graphics.
It's introduced to make it easier and clearer specify to not listen
anywhere in order to start a guest with OpenGL support.
The old way to do this was set spice graphics autoport='no' and don't
specify any ports. The new way is to use <listen type='none'/>. In
order to be able to migrate to old libvirt the migratable XML will be
generated without the listen element and with autoport='no'. Also the
old configuration will be automatically converted to the this listen
type.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
VNC graphics already supports sockets but only via 'socket' attribute.
This patch coverts that attribute into listen type 'socket'.
For backward compatibility we need to handle listen type 'socket' and 'socket'
attribute properly to support old XMLs and new XMLs. If both are provided they
have to match, if only one of them is provided we need to be able to parse that
configuration too.
To not break migration back to old libvirt if the socket is provided by user we
need to generate migratable XML without the listen element and use only 'socket'
attribute.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Until now, the only hot thing in this test was the name. That's because
we set the id to '-1' before every test. With this change, we test the
hotplug on live domains as the name suggests and as it should be.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Historically, we added heads=1 to videos, but for example for qxl, we
did not reflect that on the command line.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1283207
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Hand-entering indexes for 20 PCI controllers is not as tedious as
manually determining and entering their PCI addresses, but it's still
annoying, and the algorithm for determining the proper index is
incredibly simple (in all cases except one) - just pick the lowest
unused index.
The one exception is USB2 controllers because multiple controllers in
the same group have the same index. For these we look to see if 1) the
most recently added USB controller is also a USB2 controller, and 2)
the group *that* controller belongs to doesn't yet have a controller
of the exact model we're just now adding - if both are true, the new
controller gets the same index, but in all other cases we just assign
the lowest unused index.
With this patch in place and combined with the automatic PCI address
assignment, we can define a PCIe switch with several ports like this:
<controller type='pci' model='pcie-root-port'/>
<controller type='pci' model='pcie-switch-upstream-port'/>
<controller type='pci' model='pcie-switch-downstream-port'/>
<controller type='pci' model='pcie-switch-downstream-port'/>
<controller type='pci' model='pcie-switch-downstream-port'/>
<controller type='pci' model='pcie-switch-downstream-port'/>
<controller type='pci' model='pcie-switch-downstream-port'/>
...
These will each get a unique index, and PCI addresses that connect
them together appropriately with no pesky numbers required.
<os>
<acpi>
<table type="slic">/path/to/acpi/table/file</table>
</acpi>
</os>
will result in:
-acpitable sig=SLIC,file=/path/to/acpi/table/file
This option was introduced by QEMU commit 8a92ea2 in 2009.
https://bugzilla.redhat.com/show_bug.cgi?id=1327537
Add a new element to <domain> XML:
<os>
<acpi>
<table type="slic">/path/to/acpi/table/file</table>
</acpi>
</os>
To supply a path to a SLIC (Software Licensing) ACPI
table blob.
https://bugzilla.redhat.com/show_bug.cgi?id=1327537
This test requests a read-only virtual FAT drive on the IDE bus.
Read-only IDE drives are unsupported, but libvirt only displays
the error if it has the QEMU_CAPS_DRIVE_READONLY capability.
Read-write FAT drives are also unsupported.
Rather than only assigning a PCI address when no address is given at
all, also do it when the config says that the address type is 'pci',
but it gives no address (virDeviceInfoPCIAddressWanted()).
There are also several places after parsing but prior to address
assignment where code previously expected that any info with address
type='pci' would have a *valid* PCI address, which isn't always the
case - now we check not only for type='pci', but also for a valid
address (virDeviceInfoPCIAddressPresent()).
The test case added in this patch was directly copied from Cole's patch titled:
qemu: Wire up address type=pci auto_allocate
https://bugzilla.redhat.com/show_bug.cgi?id=1182074
If they're available and we need to pass secrets to qemu, then use the
qemu domain secret object in order to pass the secrets for RBD volumes
instead of passing the base64 encoded secret on the command line.
The goal is to make AES secrets the default and have no user interaction
required in order to allow using the AES mechanism. If the mechanism
is not available, then fall back to the current plain mechanism using
a base64 encoded secret.
New APIs:
qemu_domain.c:
qemuDomainGetSecretAESAlias:
Generate/return the secret object alias for an AES Secret Info type.
This will be called from qemuDomainSecretAESSetup.
qemuDomainSecretAESSetup: (private)
This API handles the details of the generation of the AES secret
and saves the pieces that need to be passed to qemu in order for
the secret to be decrypted. The encrypted secret based upon the
domain master key, an initialization vector (16 byte random value),
and the stored secret. Finally, the requirement from qemu is the IV
and encrypted secret are to be base64 encoded.
qemu_command.c:
qemuBuildSecretInfoProps: (private)
Generate/return a JSON properties object for the AES secret to
be used by both the command building and eventually the hotplug
code in order to add the secret object. Code was designed so that
in the future perhaps hotplug could use it if it made sense.
qemuBuildObjectSecretCommandLine (private)
Generate and add to the command line the -object secret for the
secret. This will be required for the subsequent RBD reference
to the object.
qemuBuildDiskSecinfoCommandLine (private)
Handle adding the AES secret object.
Adjustments:
qemu_domain.c:
The qemuDomainSecretSetup was altered to call either the AES or Plain
Setup functions based upon whether AES secrets are possible (we have
the encryption API) or not, we have secrets, and of course if the
protocol source is RBD.
qemu_command.c:
Adjust the qemuBuildRBDSecinfoURI API's in order to generate the
specific command options for an AES secret, such as:
-object secret,id=$alias,keyid=$masterKey,data=$base64encodedencrypted,
format=base64
-drive file=rbd:pool/image:id=myname:auth_supported=cephx\;none:\
mon_host=mon1.example.org\:6321,password-secret=$alias,...
where the 'id=' value is the secret object alias generated by
concatenating the disk alias and "-aesKey0". The 'keyid= $masterKey'
is the master key shared with qemu, and the -drive syntax will
reference that alias as the 'password-secret'. For the -drive
syntax, the 'id=myname' is kept to define the username, while the
'key=$base64 encoded secret' is removed.
While according to the syntax described for qemu commit '60390a21'
or as seen in the email archive:
https://lists.gnu.org/archive/html/qemu-devel/2016-01/msg04083.html
it is possible to pass a plaintext password via a file, the qemu
commit 'ac1d8878' describes the more feature rich 'keyid=' option
based upon the shared masterKey.
Add tests for checking/comparing output.
NB: For hotplug, since the hotplug code doesn't add command line
arguments, passing the encoded secret directly to the monitor
will suffice.
Commit 55320c23 introduced a new test for VNC to test if
vnc_auto_unix_socket is set in qemu.conf, but forget to enable it in
qemuxml2argvtest.c.
This patch also moves the code in qemuxml2xmltest.c next to other VNC
tests and refactor the test so we also check the case for parsing active
XML.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
There's no reason for keeping the features in a linked list. Especially
when we know upfront the total number of features we are loading.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The only case where the hardware capabilities influence the result
is when no <gic/> element was provided.
The test programs now ensure both that the correct GIC version is
picked in that case, and that hardware capabilities are not taken
into account when the user has already picked a GIC version.
libvirt may automatically add a pci-root or pcie-root controller to a
domain, depending on the arch/machinetype, and it hopefully always
makes the right decision about which to add (since in all cases these
controllers are an implicit part of the virtual machine).
But it's always possible that someone will create a config that
explicitly supplies the wrong type of PCI controller for the selected
machinetype. In the past that would lead to an error later when
libvirt was trying to assign addresses to other devices, for example:
XML error: PCI bus is not compatible with the device at
0000:00:02.0. Device requires a PCI Express slot, which is not
provided by bus 0000:00
(that's the error message that appears if you replace the pcie-root
controller in a Q35 domain with a pci-root controller).
This patch adds a check at the same place that the implicit
controllers are added (to ensure that the same logic is used to check
which type of pci root is correct). If a pci controller with index='0'
is already present, we verify that it is of the model that we would
have otherwise added automatically; if not, an error is logged:
The PCI controller with index='0' must be " model='pcie-root' for
this machine type, " but model='pci-root' was found instead.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1004602
https://bugzilla.redhat.com/show_bug.cgi?id=1286709
Now that we have all the pieces in place, we can add the 'iothread=#' to
the command line for the (two) controllers that support it (virtio-scsi-pci
and virtio-scsi-ccw). Add the tests as well...
Add the ability to add an 'iothread' to the controller which will be how
virtio-scsi-pci and virtio-scsi-ccw iothreads have been implemented in qemu.
Describe the new functionality and add tests to parse/validate that the
new attribute can be added.
This adds a ports= attribute to usb controller XML, like
<controller type='usb' model='nec-xhci' ports='8'/>
This maps to:
qemu -device nec-usb-xhci,p2=8,p3=8
Meaning, 8 ports that support both usb2 and usb3 devices. Gerd
suggested to just expose them as one knob.
https://bugzilla.redhat.com/show_bug.cgi?id=1271408
Similarly to what commit 7140807917 did with some internal paths,
clear vnc socket paths that were generated by us. Having such path in
the definition can cause trouble when restoring the domain. The path is
generated to the per-domain directory that contains the domain ID.
However, that ID will be different upon restoration, so qemu won't be
able to create that socket because the directory will not be prepared.
To be able to migrate to older libvirt, skip formatting the socket path
in migratable XML if it was autogenerated. And mark it as autogenerated
if it already exists and we're parsing live XML.
Best viewed with '-C'.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1326270
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Currently we only allow /dev/random and /dev/hwrng as host input
for <rng><backend model='random'/> device. This was added after
various upstream discussions in commit 4932ef45
However this restriction has generated quite a few complaints over
the years, so a new discussion was initiated:
http://www.redhat.com/archives/libvir-list/2016-April/msg00987.html
Several people suggested removing the restriction, and nobody really
spoke up to defend it. So this patch drops the path restriction
entirely
https://bugzilla.redhat.com/show_bug.cgi?id=1074464
While working on the tests for the secret initialization vector, I found
that the existing iSCSI tests were lacking in how they defined the IQN.
Many had IQN's of just 'iqn.1992-01.com.example' for one disk while using
'iqn.1992-01.com.example/1' for the second disk (same for hostdevs - guess
how they were copied/generated).
Typically (and documented this way), IQN's would include be of the form
'iqn.1992-01.com.example:storage/1' indicating an IQN using "storage" for
naming authority specific string and "/1" for the iSCSI LUN.
So modify the input XML's to use the more proper format - this of course
has a ripple effect on the output XML and the args.
Also note that the "%3A" is generated by the virURIFormat/xmlSaveUri
to represent the colon.
Signed-off-by: John Ferlan <jferlan@redhat.com>
This is backed by the qemu device pxb-pcie, which will be available in
qemu 2.6.0.
As with pci-expander-bus (which uses qemu's pxb device), the busNr
attribute and <node> subelement of <target> are used to set the bus_nr
and numa_node options.
During post-parse we validate that the domain's machinetype is
q35-based (since the device shows up for 440fx-based machinetypes, but
is unusable), as well as checking that <node> specifies a node that is
actually configured on the guest.
This controller provides a single PCIe port on a new root. It is
similar to pci-expander-bus, intended to provide a bus that can be
associated with a guest-identifiable NUMA node, but is for
machinetypes with PCIe rather than PCI (e.g. q35-based machinetypes).
Aside from PCIe vs. PCI, the other main difference is that a
pci-expander-bus has a companion pci-bridge that is automatically
attached along with it, but pcie-expander-bus has only a single port,
and that port will only connect to a pcie-root-port, or to a
pcie-switch-upstream-port. In order for the bus to be of any use in
the guest, it must have either a pcie-root-port or a
pcie-switch-upstream-port attached (and one or more
pcie-switch-downstream-ports attached to the
pcie-switch-upstream-port).
This is backed by the qemu device "pxb".
The pxb device always includes a pci-bridge that is at the bus number
of the pxb + 1.
busNr and <node> from the <target> subelement are used to set the
bus_nr and numa_node options for pxb.
During post-parse we validate that the domain's machinetype is
440fx-based (since the pxb device only works on 440fx-based machines),
and <node> also gets a sanity check to assure that the NUMA node
specified for the pxb (if any - it's optional) actually exists on the
guest.
This is a standard PCI root bus (not a bridge) that can be added to a
440fx-based domain. Although it uses a PCI slot, this is *not* how it
is connected into the PCI bus hierarchy, but is only used for
control. Each pci-expander-bus provides 32 slots (0-31) that can
accept hotplug of standard PCI devices.
The usefulness of pci-expander-bus relative to a pci-bridge is that
the NUMA node of the bus can be specified with the <node> subelement
of <target>. This gives guest-side visibility to the NUMA node of
attached devices (presuming that management apps only assign a device
to a bus that has a NUMA node number matching the node number of the
device on the host).
Each pci-expander-bus also has a "busNr" attribute. The expander-bus
itself will take the busNr specified, and all buses that are connected
to this bus (including the pci-bridge that is automatically added to
any expander bus of model "pxb" (see the next commit)) will use
busNr+1, busNr+2, etc, and the pci-root (or the expander-bus with next
lower busNr) will use bus numbers lower than busNr.
When support for dmi-to-pci-bridge was added, it was assumed that,
just as with the pci-root bus, slot 0 was reserved. This is not the
case - it can be used to connect a device just like any other slot, so
remove the restriction and update the test cases that auto-assign an
address on a dmi-to-pci-bridge.
Commit dc98a5bc refactored the code a lot and forget about checking if
listen attribute is specified. This ensures that listen attribute and
first listen element are compared only if both exist.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
After the test and qemu_process refactor now we can benefit from default
listen address for spice and vnc in tests.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Some places already check for "virt-" prefix as well as plain "virt".
virQEMUCapsHasPCIMultiBus did not, resulting in multiple PCI devices
having assigned the same unnumbered "pci" alias.
Add a test for the "virt-2.6" machine type which also omits the
<model type='virtio'/> in <interface>, to check if
qemuDomainDefaultNetModel works too.
https://bugzilla.redhat.com/show_bug.cgi?id=1325085
If the -object secret capability exists, then get the path to the
masterKey file and provide that to qemu. Checking for the existence
of the file before passing to qemu could be done, but causes issues
in mock test environment.
Since the qemuDomainObjPrivate is not available when building the
command line, the qemuBuildHasMasterKey API will have to suffice
as the primary arbiter for whether the capability exists in order
to find/return the path to the master key for usage.
Created the qemuDomainGetMasterKeyAlias API which will be used by
later patches to define the 'keyid' (eg, masterKey) to be used by
other secrets to provide the id to qemu for the master key.
This patch adds support for "vpindex", "runtime", "synic",
"stimer", and "vendor_id" features available in qemu 2.5+.
- When Hyper-V "vpindex" is on, guest can use MSR HV_X64_MSR_VP_INDEX
to get virtual processor ID.
- Hyper-V "runtime" enlightement feature allows to use MSR
HV_X64_MSR_VP_RUNTIME to get the time the virtual processor consumes
running guest code, as well as the time the hypervisor spends running
code on behalf of that guest.
- Hyper-V "synic" stands for Synthetic Interrupt Controller, which is
lapic extension controlled via MSRs.
- Hyper-V "stimer" switches on Hyper-V SynIC timers MSR's support.
Guest can setup and use fired by host events (SynIC interrupt and
appropriate timer expiration message) as guest clock events
- Hyper-V "reset" allows guest to reset VM.
- Hyper-V "vendor_id" exposes hypervisor vendor id to guest.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
After 9c17d665fd the tap device for ethernet network type is
automatically precreated before spawning qemu. Problem is, the
qemuxml2argvtest wasn't updated and thus is failing. Because of
all the APIs that new code is calling, I had to mock a lot. Also,
since the tap FDs are labeled separately from the rest of the
devices/files I had to enable NOP security driver for the test
too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Update testutilsqemu to overwrite libDir and channelTargetDir and set
private paths using domain's privateData. This changes is required for
following patch.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
If a <graphics type='spice'> has no port nor tlsPort set, the generated
QEMU command line will contain -spice port=0.
This is later going to be ignored by spice-server, but it's better not
to add it at all in this situation.
As an empty -spice is not allowed, we still need to append port=0 if we
did not add any other argument.
When debug-threads is enabled, individual threads are given a separate
name (on Linux)
Fixes:
https://bugzilla.redhat.com/show_bug.cgi?id=1140121
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Honour the <log file='...'/> element in chardevs to output
data to a file. This requires QEMU >= 2.6
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This attribute is used to extend secondary PCI bar and expose it to the
guest as 64bit memory. It works like this: attribute vram is there to
set size of secondary PCI bar and guest sees it as 32bit memory,
attribute vram64 can extend this secondary PCI bar. If both attributes
are used, guest sees two memory bars, both address the same memory, with
the difference that the 32bit bar can address only the first part of the
whole memory.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1260749
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
We always place primary video device at first place, to make it easier
to create a qemu command or format an xml, but we should also set the
primary boolean for primary video device to 'true'.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Add Spice graphics gl attribute. qemu 2.6 should have -spice gl=on argument to
enable opengl rendering context (patches on the ML). This is necessary to
actually enable virgl rendering.
Add a qemuxml2argv test for virtio-gpu + spice with virgl.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Per-domain directories were introduced in order to be able to
completely separate security labels for each domain (commit
f1f68ca334). However when the domain
name is long (let's say a ridiculous 110 characters), we cannot
connect to the monitor socket because on length of UNIX socket address
is limited. In order to get around this, let's shorten it in similar
fashion and in order to avoid conflicts, throw in an ID there as well.
Also save that into the status XML and load the old status XMLs
properly (to clean up after older domains). That way we can change it
in the future.
The shortening can be seen in qemuxml2argv tests, for example in the
hugepages-pages2 case.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Commit f1a89a8 allowed parsing configs from /etc/libvirt
without validating the emulator capabilities.
Check for the presence of a machine type in the qemu driver's
post parse function instead of crashing.
https://bugzilla.redhat.com/show_bug.cgi?id=1267256
This does nothing more than adding the new device and capability.
The device is present since QEMU 2.6.0.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Test all kinds of scenarios, including guests asking for GIC but
failing to specify a version, guests specifying an invalid version
and guests trying to use GIC with non-virt or even non-ARM machines.
Unify the naming to prepare for new test cases that will be added
later on.
Convert a couple of output XML files for the qemuxml2xml test to
symlinks while at it, since they were identical to the corresponding
input XML files anyways.
Moreover, since we're only interested in testing GIC support here,
simplify XML files by getting rid of the unrelevant bits.
When we unconditionally enable QEMU_CAPS_DEVICE, these tests need
some massaging, so do it ahead of time to not mix it in with the
big test refresh.
- minimal-s390 is not a real world working config, so drop it
- disk-usb was testing for an old code path that will be removed.
instead use it to test lack of USB disk support, and rename it
to disk-usb-nosupport. Switch xml2xml to use disk-usb-device for
input.
- cputune-numatune was needlessly using q35, switch it to an older
machine type
The current code was a little bit odd. At first we've removed all
possible implicit input devices from domain definition to add them later
back if there was any graphics device defined while parsing XML
description. That's not all, while formating domain definition to XML
description we at first ignore any input devices with bus different to
USB and VIRTIO and few lines later we add implicit input devices to XML.
This seems to me as a lot of code for nothing. This patch may look
to be more complicated than original approach, but this is a preferred
way to modify/add driver specific stuff only in those drivers and not
deal with them in common parsing/formating functions.
The update is to add those implicit input devices into config XML to
follow the real HW configuration visible by guest OS.
There was also inconsistence between our behavior and QEMU's in the way,
that in QEMU there is no way how to disable those implicit input devices
for x86 architecture and they are available always, even without graphics
device. This applies also to XEN hypervisor. VZ driver already does its
part by putting correct implicit devices into live XML.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Those tests are in qemuargv2xmltest and it makes sense to include them
also in qemuxml2xmltest and qemuxml2argvtest.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
A future patch will refactor the storage of the pinning information in a
way where the ordering will be lost. Order them numerically to avoid
changing the tests later.
Autodeflate can be enabled/disabled for memballon device
of model 'virtio'.
xml:
<devices>
<memballoon model='virtio' autodeflate='on'/>
</devices>
qemu:
qemu -device virtio-balloon-pci,...,deflate-on-oom=on
Autodeflate cannot be enabled/disabled for running domain.
Use virDomainDefAddUSBController() to add an EHCI1+UHCI1+UHCI2+UHCI3
controller set to newly defined Q35 domains that don't have any USB
controllers defined.
The real Q35 machine puts the first USB controller set (EHCI+(UHCIx4))
on bus 0 slot 0x1D, and the 2nd USB controller set on bus 0 slot 0x1A,
so let's attempt to make the virtual machine match that for
controllers with auto-assigned addresses when possible.
Three test cases were added to assure that the proper addresses are
assigned - one with a single set of unaddressed USB controllers, one
with 3 (to grab both preferred slots plus one more), and one with the
order of the controller definitions reordered, to assure that the
auto-assignment isn't mixed up by order.
If the q35 specific disable s3/s4 setting isn't supported, fallback to
specifying the PIIX setting, which is the previous behavior. It doesn't
have any effect, but qemu will just warn about it rather than error:
qemu-system-x86_64: Warning: global PIIX4_PM.disable_s3=1 not used
qemu-system-x86_64: Warning: global PIIX4_PM.disable_s4=1 not used
Since it doesn't error, I don't think we should either, since there
may be configs in the wild that already have q35 + disable_s3/4 (via
virt-manager)
The condition was checking for UHCI (and OHCI for ppc64) availability so
that it can specify the proper device instead of legacy usb. However,
for ppc64, we don't need to check both OHCI and UHCI, but only OHCI as
that is the legacy default. The condition is so big that it was just a
matter of time when someone will make a mistake there, so let's use more
lines so that it is visible what the condition checks for.
This fixes usage of -device instead of -usb for ppc64 that supports
pci-usb-ohci and does not support piix3-usb-uhci.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1297020
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
If user defines a virtio channel with UNIX socket backend and doesn't
care about the path for the socket (e.g. qemu-agent channel), we still
generate it into the persistent XML. Moreover when then user renames
the domain, due to its persistent socket path saved into the per-domain
directory, it will not start. So let's forget about old generated paths
and also stop putting them into the persistent definition.
https://bugzilla.redhat.com/show_bug.cgi?id=1278068
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Just recently, qemu forbade specifying format for sourceless
disks (qemu commit 39c4ae941ed992a3bb5). It kind of makes sense.
If there's no file to open, why specify its format. Anyway, I
have a domain like this:
<disk type='file' device='cdrom'>
<driver name='qemu' type='raw'/>
<target dev='hda' bus='ide'/>
<readonly/>
<address type='drive' controller='0' bus='0' target='0' unit='0'/>
</disk>
and obviously I am unable to start it. Therefore, a fix on our
side is needed too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
By default, QEMU truncates serial file on open. Sometimes, it could be weird -
for example, when we are trying to investigate some event, which occured several
restarts ago. This patch adds an ability to preserve previous content.
Signed-off-by: Dmitry Mishin <dim@virtuozzo.com>
Since libvirt for dubious historical reasons stores memory size as
kibibytes, it's possible that the alignments done in the qemu code
overflow the the maximum representable size in bytes. The XML parser
code handles them in bytes in some stages. Prevent this by doing
overflow checks when alinging the size and add a test case.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1260576
To be used by the family of virtio input devices:
<input type='mouse' bus='virtio'/>
<input type='tablet' bus='virtio'/>
<input type='keyboard' bus='virtio'/>
https://bugzilla.redhat.com/show_bug.cgi?id=1231114
Check if virtio-gpu provides virgl option, and add qemu command line
formatter.
It is enabled with the existing accel3d attribute:
<model type='virtio' heads='1'>
<acceleration accel3d='yes'/>
</model>
Signed-off-by: Marc-André Lureau <marcandre.lureau@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
qemu 2.5 provides virtio video device. It can be used with -device
virtio-vga for primary devices, or -device virtio-gpu for non-vga
devices. However, only the primary device (VGA) is supported with this
patch.
Reference:
https://bugzilla.redhat.com/show_bug.cgi?id=1195176
Signed-off-by: Marc-André Lureau <marcandre.lureau@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
'model' attribute was added to a panic device but only one panic
device is allowed. This patch changes panic device presence
from 'optional' to 'zeroOrMore'.
Panic device type used depends on 'model' attribute.
If no model is specified then device type depends on hypervisor
and guest arch. 'pseries' model is used for pSeries guest and
'isa' model is used in other cases.
XML:
<devices>
<panic model='hyperv'/>
</devices>
QEMU command line:
qemu -cpu <cpu_model>,hv_crash
It's just a copy&paste of qemuxml2argv test anyway. We can test most of
them (except for qemuxmlns-qemu-ns-domain.xml which fails to validate
against our schema) by qemuxml2argv test.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
USB controllers can share the same 'index' which indicates, that there
is some sort of master-companion relationship. Reorder the controllers
in XML in to place the master controller before its companions. This is
required by QEMU to not fail with error message:
error: internal error: process exited while connecting to monitor:
2015-10-26T16:25:17.630265Z qemu-system-x86_64:
-device ich9-usb-uhci1,masterbus=usb.0,firstport=0,bus=pci.0,multifunction=on,addr=0x6:
USB bus 'usb.0' not found
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1166452
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The -sdl and -net ...name=XXX arguments were both introduced
in QEMU 0.10, so the QEMU driver can assume they are always
available.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
As of QEMU 0.10.0 the -vga argument was introduced, so the
QEMU driver can assume it is always available.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
As of QEMU 0.10.0 the -drive format= parameter was added,
so the QEMU driver can assume it is always available.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
As of QEMU 0.10.0, the -drive cache option stopped using
the on/off value names, so the QEMU driver can assume
use of the new value names.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Since we require QEMU 0.12.0, we can assume that QEMU supports
all of the fd, tcp, unix and exec migration protocols.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
We have twice previously attempted to remove Xenner
support
commit de9be0ab4d
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Wed Aug 22 17:29:01 2012 +0100
Remove xenner support
commit 92572c3d71
Author: Ján Tomko <jtomko@redhat.com>
Date: Wed Feb 18 16:33:50 2015 +0100
Remove code handling the QEMU_CAPS_DOMID capability
This change really does remove the last traces of it
in the capabilities handling code
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
As of QEMU 0.9.1 the -drive argument can be used to configure
all disks, so the QEMU driver can assume it is always available
and drop support for -hda/-cdrom/etc.
Many of the tests need updating because a great many were
running without CAPS_DRIVE set, so using the -hda legacy
syntax.
Fixing the tests uncovered a bug in the argv -> xml
convertor which failed to handle disk with if=floppy.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Back in
commit bd6c46fa0c
Author: Juerg Haefliger <juerg.haefliger@hp.com>
Date: Mon Jan 31 06:42:57 2011 -0500
tests: handle backspace-newline pairs in test input files
all the test argv files were line wrapped so that the args
were less than 80 characters.
The way the line wrapping was done turns out to be quite
undesirable, because it often leaves multiple parameters
on the same line. If we later need to add or remove
individual parameters, then it leaves us having to redo
line wrapping.
This commit changes the line wrapping so that every
single "-param value" is one its own new line. If the
"value" is still too long, then we break on ',' or ':'
or ' ' as needed.
This means that when we come to add / remove parameters
from the test files line, the patch diffs will only
ever show a single line added/removed which will greatly
simplify review work.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1249981
When qemuDomainPinIOThread was added in commit id 'fb562614', a check
for the IOThread capability was not needed since a check for iothreadpids
covered the condition where the support for IOThreads was not present.
The iothreadpids array was only created if qemuProcessDetectIOThreadPIDs
was able to query the monitor for IOThreads. It would only do that if
the QEMU_CAPS_OBJECT_IOTHREAD capability was set.
However, when iothreadids were added in commit id '8d4614a5' and the
check for iothreadpids was replaced by a search through the iothreadids[]
array for the matching iothread_id that left open the possibility that
an iothreadids[] array was defined, but the entries essentially pointed
to elements with only the 'iothread_id' defined leaving the 'thread_id'
value of 0 and eventually the cpumap entry of NULL.
This was because, the original IOThreads commit id '72edaae7' only
checked if IOThreads were defined and if the emulator had the IOThreads
capability, then IOThread objects were added at startup. The "capability
failure" check was only done when a disk was assigned to an IOThread in
qemuCheckIOThreads. This was because the initial implementation had no way
to dynamically add IOThreads, but it was possible to dynamically add a
disk to the domain. So the decision was if the domain supported it, then
add the IOThread objects. Then if a disk with an IOThread defined was
added, it could check the capability and fail to add if not there. This
just meant the 'iothreads' value was essentially ignored.
Eventually commit id 'a27ed6e7' allowed for the dynamic addition and
deletion of IOThread objects. So it was no longer necessary to generate
IOThread objects to dynamically attach a disk to. However, the startup
and disk check code was not modified to reflect this.
This patch will move the capability failure check to when IOThread
objects are being added to the command line. Thus a domain that has
IOThreads defined will not be started if the emulator doesn't support
the capability. This means when qemuCheckIOThreads is called to add
a disk, it's no longer necessary to check the capability. Instead the
code can use the IOThreadFind call to indicate that the IOThread
doesn't exist.
Finally because it could be possible to have a domain running with the
iothreadids[] defined prior to this change if libvirtd is restarted each
having mostly empty elements, qemuProcessDetectIOThreadPIDs will check
if there are niothreadids when the QEMU_CAPS_OBJECT_IOTHREAD capability
check fails and remove the elements and array if it exists.
With these changes in place, it turns out the cputune-numatune test
was failing because the right bit wasn't set in the test. So used the
opportunity to fix that and create a test that would expect to fail
with some sort of iothreads defined and used, but not having the
correct capability.
- qemuxml2argv-aarch64-mmio-default-pci: Verify that we still default
to virtio-mmio even if qemu is new enough to support PCI
- qemuxml2argv-aarch64-virtio-pci: Check generated arm virtio PCI args
Our docs state that subelements of <metadata> shall have a namespace
and the medatata APIs expect that too. To avoid inaccessible
<metadata> sub-elements, just remove those that don't conform to the
documentation.
Apart from adding the new condition this patch renames the function and
refactors the code flow to allow the changes.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1245525
We are using memory-backing-file even when it's not needed, for example
if user requests hugepages for memory backing, but does not specify any
pagesize or memory node pinning. This causes migrations to fail when
migrating from older libvirt that did not do this. So similarly to
commit 7832fac847 which does it for
memory-backend-ram, this commit makes is more generic and
backend-agnostic, so the backend is not used if there is no specific
pagesize of hugepages requested, no nodeset the memory node should be
bound to, no memory access change required, and so on.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1266856
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
That function is called qemuBuildMemPathStr() and will be used in
other places in the future. The change in the test suite is proper due
to the fact that -mem-prealloc makes only sense with -mem-path (from
qemu documentation -- html/qemu-doc.html).
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
My original implementation was based on a qemu version that still did
not have all the checks in place. Using sizes that would align to odd
megabyte increments will produce the following error:
qemu-kvm: -device pc-dimm,node=0,memdev=memdimm0,id=dimm0: backend memory size must be multiple of 0x200000
qemu-kvm: -device pc-dimm,node=0,memdev=memdimm0,id=dimm0: Device 'pc-dimm' could not be initialized
Introduce an alignment retrieval function for memory devices and use it
to align the devices separately and modify a test case to verify it.
For some machine types ppc64 machines now require that memory sizes are
aligned to 256MiB increments (due to the dynamically reconfigurable
memory). As now we treat existing configs reasonably in regards to
migration, we can round all the sizes unconditionally. The only drawback
will be that the memory size of a VM can potentially increase by
(256MiB - 1byte) * number_of_NUMA_nodes.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1249006
When we are starting a qemu process for an incomming migration or
snapshot reloading we should not modify the memory sizes in the domain
since we could potentially change the guest ABI that was tediously
checked before. Additionally the function now updates the initial memory
size according to the NUMA node size, which should not happen if we are
restoring state.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1252685
https://bugzilla.redhat.com/show_bug.cgi?id=1260846
Introduced by 8fedbbdb, if we parse an unordered NUMA cell, will
get a segfault. This is because of a check for overlapping @cpus
sets we have there. However, since the array to hold guest NUMA
cells is allocated upfront and therefore it contains all zeros,
an out of order cell will break our assumption that cell IDs have
increasing character. At this point we try to access yet NULL
bitmap and therefore segfault.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Adds a new interface type using UDP sockets, this seems only applicable
to QEMU but have edited tree-wide to support the new interface type.
The interface type required the addition of a "localaddr" (local
address), this then maps into the following xml and qemu call.
<interface type='udp'>
<mac address='52:54:00:5c:67:56'/>
<source address='127.0.0.1' port='11112'>
<local address='127.0.0.1' port='22222'/>
</source>
<model type='virtio'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0'/>
</interface>
QEMU call:
-net socket,udp=127.0.0.1:11112,localaddr=127.0.0.1:22222
Notice the xml "local" entry becomes the "localaddr" for the qemu call.
reference:
http://lists.gnu.org/archive/html/qemu-devel/2011-11/msg00629.html
Signed-off-by: Jonathan Toppins <jtoppins@cumulusnetworks.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
We are automatically generating some socket paths for domains, but all
those paths end up in a directory that's the same for multiple domains.
The problem is that multiple domains can each run with different
seclabels (users, selinux contexts, etc.). The idea here is to create a
per-domain directory labelled in a way that each domain can access its
own unix sockets.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1146886
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This controller can be connected only to a port on a
pcie-switch-upstream-port. It provides a single hotpluggable port that
will accept any PCI or PCIe device, as well as any device requiring a
pcie-*-port (the only current example of such a device is the
pcie-switch-upstream-port).
This controller can be connected only to a pcie-root-port or a
pcie-switch-downstream-port (which will be added in a later patch),
which is the reason for the new connect type
VIR_PCI_CONNECT_TYPE_PCIE_PORT. A pcie-switch-upstream-port provides
32 ports (slot=0 to slot=31) on the downstream side, which can only
have pci controllers of model "pcie-switch-downstream-port" plugged
into them, which is the reason for the other new connect type
VIR_PCI_CONNECT_TYPE_PCIE_SWITCH.
This is backed by the qemu device ioh3420.
chassis and port from the <target> subelement are used to store/set the
respective qemu device options for the ioh3420. Currently, chassis is
set to be the index of the controller, and port is set to
"(slot << 3) + function" (per suggestion from Alex Williamson).
This controller can be connected (at domain startup time only - not
hotpluggable) only to a port on the pcie root complex ("pcie-root" in
libvirt config), hence the new connect type
VIR_PCI_CONNECT_TYPE_PCIE_ROOT. It provides a hotpluggable port that
will accept any PCI or PCIe device.
New attributes must be added to the controller <target> subelement for
this - chassis and port are guest-visible option values that will be
set by libvirt with values derived from the controller's index and pci
address information.
This uses the new subelement/attribute in two ways:
1) If a "pci-bridge" pci controller has no chassisNr attribute, it
will automatically be set to the controller's index as soon as the
controller's PCI address is known (during
qemuDomainAssignPCIAddresses()).
2) when creating the commandline for a pci-bridge device, chassisNr
will be used to set qemu's chassis_nr option (rather than the previous
practice of hard-coding it to the controller's index).
