To support backwards live migration we must strip the default added
audio element, however, we are too aggressive in doing so. We are only
comparing a couple of attributes for equality, so risk stripping config
that was user customized. To improve this we need to a deep comparison
of the audio config.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
It is useful to be able to deeply check them for equality.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The logic of saving metadata doesn't have to be in endjob section as
it will only happen if we have successfully created snapshot.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There is no need for the extra variable as it is used only at one place.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This makes it obvious that the function is called for creating new
snapshot and redefining old snapshot as well.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Function qemuDomainJobAllowed() is never used -> remove it.
The last use was removed in commit 3f2fa8f303
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemuDomainObjExitMonitor is just an alias for it at this point.
This also removes the incomplete ATTRIBUTE_NONNULL(1) annotation.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This reverts my
commit dc2fd51fd7
Check for domain liveness in qemuDomainObjExitMonitor
which fixed the symptoms of the bug later fixed by
commit 81f50cb92d
qemu: Avoid calling qemuProcessStop without a job
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Remove the check from conditions where it's coupled with some other
checks.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This wrapper for qemuDomainObjExitMonitorInternal was
extended by my commit dc2fd51fd7
to check whether the domain is still alive, because
we were observing crashes if the QEMU process died
while some of our APIs were in the monitor and the thread
processing the EOF event freed the domain definition.
This bug was fixed by:
commit 81f50cb92d
qemu: Avoid calling qemuProcessStop without a job
but we kept checking for the return value since.
Remove the G_GNUC_WARN_UNUSED_RESULT attribute since
all of the calls that could set def->id to -1 are protected
by qemuProcessBeginStopJob and cannot happen while we have a job
in the monitor.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There is a stray 'return -1' executed on all code paths.
Fixes: c18d9e23fa
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
macOS on Apple silicon reports 'arm64' as the architecture from uname,
which we need to canonicalize to VIR_ARCH_AARCH64 / 'aarch64'.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The libvirt_recover_xattrs.sh tool hangs when run. When no flags
are provided OPTIND is 1, so the loop expands to 'shift 0' which
has not effect. Rewrite to just loop over $@ instead which involves
less cleverness.
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In the dissect_xdr_bytes() there's a comment that the string
allocated by xdr_bytes() can't be freed using xdr_free(). Well,
that is expected because xdr_bytes() used plain calloc() AND the
string is not an XDR struct but plain 'char *' type. Passing it
to xdr_free() must result in weird things happening.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
When the dissector sees a byte sequence that is either an opaque
data (xdr_opaque) or a byte sequence (xdr_bytes) it formats the
bytes as a hex numbers using our own implementation. But
wireshark already provides a function for it: tvb_bytes_to_str().
NB, the reason why it returns a const string is so that callers
don't try to free it - the string is allocated using an allocator
which will decide when to free it.
The wireshark formatter was introduced in wireshark commit of
v1.99.2~479 and thus is present in the version we require at
least (2.6.0).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/
Co-authored-by: Weblate <noreply@weblate.org>
Signed-off-by: Fedora Weblate Translation <i18n@lists.fedoraproject.org>
Commit 24be92b8e moved the option rom settings validation code to the
validation callbacks, but that doesn't work properly with device hotplug
as we assign addresses only after parsing the whole XML. The check is
too strict for that and caused failures when hotplugging devices such
as:
<interface type='network'>
<source network='default'/>
<model type='virtio'/>
<rom enabled='no'/>
</interface>
This patch relaxes the check in the validation callback to accept also
_NONE and _UNASSIGNED address types and returns the check to
'qemuBuildRomProps' so that we preserve the full validation as we've
used to.
Fixes: 24be92b8e3
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2021437
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit bc24810c2c modified code querying blockstats to use the
'query-nodes' parameter so that we can fetch stats also for images which
are not attached to a frontend such as block copy and backup scratch
images.
Unfortunately that broke the old blockstats because if 'query-nodes' is
enabled qemu doesn't output the 'qdev' parameter which our code used for
matching to the disk and also qemu neglects to populate the frontend
stats at all so we can't even switch to using nodename for matching.
To fix this we need to do two calls, one with 'query-nodes' disabled
using the old logic to populate everything and then an additional one
which populates all the remaining images.
Closes: https://gitlab.com/libvirt/libvirt/-/issues/246
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Tested-by: Erik Skultety <eskultet@redhat.com>
These functions always return success so it seems logical to not
return anything and remove unnecessary checks.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch rewrites the pattern using early return where it is
not needed and changes the return type of the functions to 'void'
if possible.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
I have seen this pattern a lot in the project, so I decided to
rewrite code I stumbled upon to the same pattern as well.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The libxlDomainObjPrivate object is never locked and hence does not need to
be a virObjectLockable object.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
I think it makes no sense to have else branches after return or
goto as it will never reach them in cases it should not. This
patch makes the code more readable (at least to me).
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Upon successful return from virDomainObjListAdd() the
virDomainObj is the owner of secret definition. To make this
ownership transfer even more visible, lets pass the definition as
a double pointer and use g_steal_pointer().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Upon successful return from virStoragePoolObjListAdd() the
virStoragePoolObj is the owner of secret definition. To make this
ownership transfer even more visible, lets pass the definition as
a double pointer and use g_steal_pointer().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Upon successful return from virSecretObjListAdd() the
virSecretObj is the owner of secret definition. To make this
ownership transfer even more visible, lets pass the definition as
a double pointer and use g_steal_pointer().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Upon successful return from virInterfaceObjListAssignDef() the
virInterfaceObj is the owner of secret definition. To make this
ownership transfer even more visible, lets pass the definition as
a double pointer and use g_steal_pointer().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The check for whether the swtpm binary was modified is checking pointers
to the mtime field in two distinct structs, so will always compare
different. This resulted in re-probing swtpm capabilities every time,
as many as 20 times for a single VM launch.
Fixes:
commit 01cf7a1bb9
Author: Stefan Berger <stefanb@us.ibm.com>
Date: Thu Jul 25 14:22:04 2019 -0400
tpm: Check whether previously found executables were updated
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
