Make cpuset local to the while loop and free it once done with it each
time through the loop. Add a sa_assert() to virBitmapParse() to keep Coverity
from believing there could be a negative return and possible resource leak.
Commit c308a9ae was incomplete; it resolved the configure failure,
but not a later build failure.
* src/util/virnetdevbridge.c: Include pre-req header.
* configure.ac (AC_CHECK_HEADERS): Prefer standard in.h over
non-standard ip6.h.
There's no need to do lots of readlink() calls to canonicalize
a name if we're only going to use stat() on it, since stat()
already chases symlinks.
* src/util/virutil.c (virGetDeviceID): Let stat() do the symlink
chasing.
Pass stub driver name directly to pciDettachDevice and pciReAttachDevice to fit
for different libvirt drivers. For example, qemu driver prefers pci-stub, but
Xen prefers pciback.
Signed-off-by: Chunyan Liu <cyliu@suse.com>
"virGetDeviceID" could be used across the sources, but it doesn't
relate with this series, and could be done later.
* src/util/virutil.h: (Declare virGetDeviceID, and
vir{Get,Set}DeviceUnprivSGIO)
* src/util/virutil.c: (Implement virGetDeviceID and
vir{Get,Set}DeviceUnprivSGIO)
* src/libvirt_private.syms: Export private symbols of upper helpers
This is an adjustment to the fix for
https://bugzilla.redhat.com/show_bug.cgi?id=889319
to account for two bonehead mistakes I made.
commit ac2797cf2a attempted to fix a
problem with netlink in newer kernels requiring an extra attribute
with a filter flag set in order to receive an IFLA_VFINFO_LIST from
netlink. Unfortunately, the #ifdef that protected against compiling it
in on systems without the new flag went a bit too far, assuring that
the new code would *never* be compiled, and even if it had, the code
was incorrect.
The first problem was that, while some IFLA_* enum values are also
their existence at compile time, IFLA_EXT_MASK *isn't* #defined, so
checking to see if it's #defined is not a valid method of determining
whether or not to add the attribute. Fortunately, the flag that is
being set (RTEXT_FILTER_VF) *is* #defined, and it is never present if
IFLA_EXT_MASK isn't, so it's sufficient to just check for that flag.
And to top it off, due to the code not actually compiling when I
thought it did, I didn't realize that I'd been given the wrong arglist
to nla_put() - you can't just send a const value to nla_put, you have
to send it a pointer to memory containing what you want to add to the
message, along with the length of that memory.
This time I've actually sent the patch over to the other machine
that's experiencing the problem, applied it to the branch being used
(0.10.2) and verified that it works properly, i.e. it does fix the
problem it's supposed to fix. :-/
To bring in line with new naming practice, rename the=
src/util/cgroup.{h,c} files to vircgroup.{h,c}
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This patch resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=889319
When assigning an SRIOV virtual function to a guest using "intelligent
PCI passthrough" (<interface type='hostdev'>, which sets the MAC
address and vlan tag of the VF before passing its info to qemu),
libvirt first learns the current MAC address and vlan tag by sending
an NLM_F_REQUEST message for the VF's PF (physical function) to the
kernel via a NETLINK_ROUTE socket (see virNetDevLinkDump()); the
response message's IFLA_VFINFO_LIST section is examined to extract the
info for the particular VF being assigned.
This worked fine with kernels up until kernel commit
115c9b81928360d769a76c632bae62d15206a94a (first appearing in upstream
kernel 3.3) which changed the ABI to not return IFLA_VFINFO_LIST in
the response until a newly introduced IFLA_EXT_MASK field was included
in the request, with the (newly introduced, of course) RTEXT_FILTER_VF
flag set.
The justification for this ABI change was that new fields had been
added to the VFINFO, causing NLM_F_REQUEST messages to fail on systems
with large numbers of VFs if the requesting application didn't have a
large enough buffer for all the info. The idea is that most
applications doing an NLM_F_REQUEST don't care about VFINFO anyway, so
eliminating it from the response would lower the requirements on
buffer size. Apparently, the people who pushed this patch made the
mistaken assumption that iproute2 (the "ip" command) was the only
package that used IFLA_VFINFO_LIST, so it wouldn't break anything else
(and they made sure that iproute2 was fixed.
The logic of this "fix" is debatable at best (one could claim that the
proper fix would be for the applications in question to be fixed so
that they properly sized the buffer, which is what libvirt does
(purely by virtue of using libnl), but it is what it is and we have to
deal with it.
In order for <interface type='hostdev'> to work properly on systems
with a kernel 3.3 or later, libvirt needs to add the afore-mentioned
IFLA_EXT_MASK field with RTEXT_FILTER_VF set.
Of course we also need to continue working on systems with older
kernels, so that one bit of code is compiled conditionally. The one
time this could cause problems is if the libvirt binary was built on a
system without IFLA_EXT_MASK which was subsequently updated to a
kernel that *did* have it. That could be solved by manually providing
the values of IFLA_EXT_MASK and RTEXT_FILTER_VF and adding it to the
message anyway, but I'm uncertain what that might actually do on a
system that didn't support the message, so for the time being we'll
just fail in that case (which will very likely never happen anyway).
This patch fixes the lack of error messages when libvirt fails to find
VFINFO in a returned netlinke response message.
https://bugzilla.redhat.com/show_bug.cgi?id=827519#c10 is an example
of the error message that was previously logged when the
IFLA_VFINFO_LIST object was missing from the netlink response. The
reason for this failure is detailed in
https://bugzilla.redhat.com/show_bug.cgi?id=889319
Even though that root problem has been fixed, the experience of
finding the root cause shows us how important it is to properly log an
error message in these cases. This patch *seems* to replace the entire
function, but really most of the changes are due to moving code that
was previously inside an if() statement out to the top level of the
function (the original if() was reversed and made to log an error and
return).
Revert the complex workaround of commit 39d91e9, now that we have
a nicer framework for shutting up broken gcc.
* src/util/buf.c (virBufferEscape): Simplify.
Historically there was an inconsistency in handling of the
itanium arch. The xen driver & CPU model code treated it
as 'ia64' but the QEMU capabilities code used 'itanium'. On
the grounds that no one has ever seriously used itanium
with QEMU, while RHEL shipped itanium with Xen, we should
favour 'ia64' as the canonical format
Introduce a 'virArch' enum for CPU architectures. Include
data type providing wordsize and endianness, and APIs to
query this info and convert to/from enum and string form.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This is yet another refinement to the fix for CVE-2012-3411:
https://bugzilla.redhat.com/show_bug.cgi?id=833033
It turns out that it would be very intrusive to correctly backport the
entire --bind-dynamic option to older dnsmasq versions
(e.g. dnsmasq-2.48 that is used on RHEL6.x and CentOS 6.x), but very
simple to patch those versions to just use SO_BINDTODEVICE on all
their listening sockets (SO_BINDTODEVICE also has the desired effect
of permitting only traffic that was received on the interface(s) where
dnsmasq was set to listen.)
This patch modifies the dnsmasq capabilities detection to detect the
string:
--bind-interfaces with SO_BINDTODEVICE
in the output of "dnsmasq --version", and in that case realize that
using the old --bind-interfaces option is just as safe as
--bind-dynamic (and therefore *not* forbid creation of networks that
use public IP address ranges).
If -bind-dynamic is available, it is still preferred over
--bind-interfaces.
Note that this patch does no harm in upstream, or in any distro's
downstream if it happens to end up there, but builds for distros that
have a new enough dnsmasq to support --bind-dynamic do *NOT* need to
specifically backport this patch; it's only required for distro
releases that have dnsmasq too old to have --bind-dynamic (and those
distros will need to add the SO_BINDTODEVICE patch to dnsmasq,
*including the extra string in the --version output*, as well.
When LXC labels USB devices during hotplug, it is running in
host context, so it needs to pass in a vroot path to the
container root.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
There was a double free issue caused by virSysinfoRead on s390,
as the same manufacturer string instance was assigned to more
than one processor record.
Cleaned up other potential memory issues and restructured the sysinfo
parsing code by moving repeating patterns into a helper function.
The restructuring made it necessary to conditionally disable
-Wlogical-op for some older GCC versions, using pragma GCC diagnostic.
This is a GCC specific pragma, which is acceptable, since we're
using it to work around a GCC specific bug.
Finally, added a function virSysinfoSetup to configure the sysinfo
data source files/script during run time, to facilitate writing test
programs. This function is not published in sysinfo.h and only
there for testing.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
The current virStorageFileGet{LVM,SCSI}Key methods return
the key as the return value. Unfortunately it is desirable
for "NULL" to be a valid return value, as well as an error
indicator. Thus the returned key must instead be provided
as an out-parameter.
When we invoke lvs or scsi_id to extract ID for block devices,
we don't want virCommandWait logging errors messages. Thus we
must explicitly check 'status != 0', rather than letting
virCommandWait do it.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The QED file format is non-versioned, so although the magic
value matched, libvirt rejected it due to lack of a version
number to compare against. We need to distinguish this case
by allowing a value of '-2' to indicate a non-versioned file
where only the magic is required to match
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To help us detect when new storage file versions come into
existance log a warning if the storage file magic matches,
but the version does not
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Fully stub out the virCgroupGetAppRoot method as done with other
methods in the file, rather than just the body. This lets us
annotate the unused parameter to avoid a warning
* Autotools changes:
- Don't assume Qemu is Linux-only
- Check Linux headers only on Linux
- Disable firewalld on FreeBSD
* Initctl:
Initctl seem to present only on Linux, so stub it on other platforms
* Raw I/O: Linux-only as well
* Headers cleanup
This patch gets rid of the undeterministic error reporting code done on
return values of get(pw|gr)nam_r. With this patch, if the group record
is not returned by the corresponding function this error is not
considered fatal even if errno != 0. The error is logged in such case.
virStorageFileGetLVMKey and virStorageFileGetSCSIKey
both return heap allocated strings, so the return value
should not be marked const.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This will be used whenever a NIC with guaranteed throughput is to
be plugged into a bridge. It will adjust the average throughput of
non guaranteed NICs (classid 1:2) to meet new requirements.
These set bridge part of QoS when bringing domain's interface up.
Long story short, if there's a 'floor' set, a new QoS class is created.
ClassID MUST be unique within the bridge and should be kept for
unplug phase.
These classes can borrow unused bandwidth. Basically,
only egress qdsics can have classes, therefore we can
do this kind of traffic shaping only on host's outgoing,
that is domain's incoming traffic.
This is however supported only on domain interfaces with
type='network'. Moreover, target network needs to have at least
inbound QoS set. This is required by hierarchical traffic shaping.
From now on, the required attribute for <inbound/> is either 'average'
(old) or 'floor' (new). This new attribute can be used just for
interfaces type of network (<interface type='network'/>) currently.
Stochastic Fairness Queuing (SFQ) is queuing discipline
(qdisc) which doesn't really shape any traffic but 'just'
re-arrange packets in sending buffer so no stream starve.
The goal is to ensure fairness. There is basically only one
configuration parameter (perturb) which is set to advised
value of 10.
The DHCPv6 support includes IPV6 dhcp-range and dhcp-host for one
IPv6 subnetwork on one interface. This support will only work
if dnsmasq version >= 2.64; otherwise an error occurs if
dhcp-range or dhcp-host is specified for an IPv6 address.
Essentially, this change provides the same DHCP support for IPv6
that has been available for IPv4.
With dnsmasq >= 2.64, support for the RA service is also now provided
by dnsmasq (radvd is no longer used/started). (Although at least one
version of dnsmasq prior to 2.64 "supported" IPv6 Router
Advertisement, there were bugs (fixed in 2.64) that rendered it
unusable.)
Documentation and the network schema has been updated
to reflect the new support.
I noticed when writing the backend functions for virNetworkUpdate that
I was repeating the same sequence of memmove, VIR_REALLOC, nXXX-- (and
messed up the args to memmove at least once), and had seen the same
sequence in a lot of other places, so I decided to write a few
utility functions/macros - see the .h file for full documentation.
The intent is to reduce the number of lines of code, but more
importantly to eliminate the need to check the element size and
element count arithmetic every time we need to do this (I *always*
make at least one mistake.)
VIR_INSERT_ELEMENT: insert one element at an arbitrary index within an
array of objects. The size of each object is determined
automatically by the macro using sizeof(*array). The new element's
contents are copied into the inserted space, then the original copy
of contents are 0'ed out (if everything else was
successful). Compile-time assignment and size compatibility between
the array and the new element is guaranteed (see explanation below
[*])
VIR_INSERT_ELEMENT_COPY: identical to VIR_INSERT_ELEMENT, except that
the original contents of newelem are not cleared to 0 (i.e. a copy
is made).
VIR_APPEND_ELEMENT: This is just a special case of VIR_INSERT_ELEMENT
that "inserts" one past the current last element.
VIR_APPEND_ELEMENT_COPY: identical to VIR_APPEND_ELEMENT, except that
the original contents of newelem are not cleared to 0 (i.e. a copy
is made).
VIR_DELETE_ELEMENT: delete one element at an arbitrary index within an
array of objects. It's assumed that the element being deleted is
already saved elsewhere (or cleared, if that's what is appropriate).
All five of these macros have an _INPLACE variant, which skips the
memory re-allocation of the array, assuming that the caller has
already done it (when inserting) or will do it later (when deleting).
Note that VIR_DELETE_ELEMENT* can return a failure, but only if an
invalid index is given (index + amount to delete is > current array
size), so in most cases you can safely ignore the return (that's why
the helper function virDeleteElementsN isn't declared with
ATTRIBUTE_RETURN_CHECK). A warning is logged if this ever happens,
since it is surely a coding error.
[*] One initial problem with the INSERT and APPEND macros was that,
due to both the array pointer and newelem pointer being cast to void*
when passing to virInsertElementsN(), any chance of type-checking was
lost. If we were going to move in newelem with a memmove anyway, we
would be no worse off for this. However, most current open-coded
insert/append operations use direct struct assignment to move the new
element into place (or just populate the new element directly) - thus
use of the new macros would open a possibility for new usage errors
that didn't exist before (e.g. accidentally sending &newelemptr rather
than newelemptr - I actually did this quite a lot in my test
conversions of existing code).
But thanks to Eric Blake's clever thinking, I was able to modify the
INSERT and APPEND macros so that they *do* check for both assignment
and size compatibility of *ptr (an element in the array) and newelem
(the element being copied into the new position of the array). This is
done via clever use of the C89-guaranteed fact that the sizeof()
operator must have *no* side effects (so an assignment inside sizeof()
is checked for validity, but not actually evaluated), and the fact
that virInsertElementsN has a "# of new elements" argument that we
want to always be 1.
QEMU supports setting vendor and product strings for disk since
1.2.0 (only scsi-disk, scsi-hd, scsi-cd support it), this patch
exposes it with new XML elements <vendor> and <product> of disk
device.
virGetGroupIDByName is documented as returning 1 if the groupname
cannot be found. getgrnam_r is documented as returning:
« 0 or ENOENT or ESRCH or EBADF or EPERM or ... The given name
or gid was not found. »
and that:
« The formulation given above under "RETURN VALUE" is from POSIX.1-2001.
It does not call "not found" an error, hence does not specify what
value errno might have in this situation. But that makes it impossible to
recognize errors. One might argue that according to POSIX errno should be
left unchanged if an entry is not found. Experiments on various UNIX-like
systems shows that lots of different values occur in this situation: 0,
ENOENT, EBADF, ESRCH, EWOULDBLOCK, EPERM and probably others. »
virGetGroupIDByName returns an error when the return value of getgrnam_r
is non-0. However on my RHEL system, getgrnam_r returns ENOENT when the
requested user cannot be found, which then causes virGetGroupID not
to behave as documented (it returns an error instead of falling back
to parsing the passed-in value as an gid).
This commit makes virGetGroupIDByName only report an error when errno
is set to one of the values in the posix description of getgrnam_r
(which are the same as the ones described in the manpage on my system).
virGetUserIDByName is documented as returning 1 if the username
cannot be found. getpwnam_r is documented as returning:
« 0 or ENOENT or ESRCH or EBADF or EPERM or ... The given name
or uid was not found. »
and that:
« The formulation given above under "RETURN VALUE" is from POSIX.1-2001.
It does not call "not found" an error, hence does not specify what
value errno might have in this situation. But that makes it impossible to
recognize errors. One might argue that according to POSIX errno should be
left unchanged if an entry is not found. Experiments on various UNIX-like
systems shows that lots of different values occur in this situation: 0,
ENOENT, EBADF, ESRCH, EWOULDBLOCK, EPERM and probably others. »
virGetUserIDByName returns an error when the return value of getpwnam_r
is non-0. However on my RHEL system, getpwnam_r returns ENOENT when the
requested user cannot be found, which then causes virGetUserID not
to behave as documented (it returns an error instead of falling back
to parsing the passed-in value as an uid).
This commit makes virGetUserIDByName only report an error when errno
is set to one of the values in the posix description of getpwnam_r
(which are the same as the ones described in the manpage on my system).
If debugging is enabled, the debug messages are sent to stderr.
Moreover, if a command has catching of stderr set, the messages
gets mixed with stdout output (assuming both outputs are stored
in the same variable). The resulting string then doesn't
necessarily have to start with desired prefix then. This bug
exposes itself when parsing dnsmasq output:
2012-12-06 11:18:11.445+0000: 18491: error :
dnsmasqCapsSetFromBuffer:664 : internal error cannot parse
/usr/sbin/dnsmasq version number in '2012-12-06
11:11:02.232+0000: 18492: debug : virFileClose:72 : Closed fd 22'
We can clearly see that the output of dnsmasq --version doesn't
start with expected "Dnsmasq version " string but a libvirt debug
output.
If the debugging is enabled, the virCommand subsystem catches debug
messages in the command output as well. In that case, we can't assume
the string corresponding to command's stdout will start with specific
prefix. But the prefix can be moved deeper in the string. This bug
shows itself when parsing dnsmasq output:
2012-12-06 11:18:11.445+0000: 18491: error :
dnsmasqCapsSetFromBuffer:664 : internal error cannot parse
/usr/sbin/dnsmasq version number in '2012-12-06 11:11:02.232+0000:
18492: debug : virFileClose:72 : Closed fd 22'
We can clearly see that the output of dnsmasq --version
doesn't start with expected "Dnsmasq version " string but a libvirt
debug output.
The pciWrite32 function assembled the array of data to be written to the
fd with a bad offset on the last byte. This issue was probably caused by
a typo (14, 24).
This introduces a few new APIs for dealing with strings.
One to split a char * into a char **, another to join a
char ** into a char *, and finally one to free a char **
There is a simple test suite to validate the edge cases
too. No more need to use the horrible strtok_r() API,
or hand-written code for splitting strings.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To be able todo controlled shutdown/reboot of containers an
API to talk to init via /dev/initctl is required. Fortunately
this is quite straightforward to implement, and is supported
by both sysvinit and systemd. Upstart support for /dev/initctl
is unclear.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This new function returns true if the given address is in the range of
any "private" or "local" networks as defined in RFC1918 (IPv4) or
RFC3484/RFC4193 (IPv6), otherwise they return false.
These ranges are:
192.168.0.0/16
172.16.0.0/16
10.0.0.0/24
FC00::/7
FEC0::/10
In order to optionally take advantage of new features in dnsmasq when
the host's version of dnsmasq supports them, but still be able to run
on hosts that don't support the new features, we need to be able to
detect the version of dnsmasq running on the host, and possibly
determine from the help output what options are in this dnsmasq.
This patch implements a greatly simplified version of the capabilities
code we already have for qemu. A dnsmasqCaps device can be created and
populated either from running a program on disk, reading a file with
the concatenated output of "dnsmasq --version; dnsmasq --help", or
examining a buffer in memory that contains the concatenated output of
those two commands. Simple functions to retrieve capabilities flags,
the version number, and the path of the binary are also included.
bridge_driver.c creates a single dnsmasqCaps object at driver startup,
and disposes of it at driver shutdown. Any time it must be used, the
dnsmasqCapsRefresh method is called - it checks the mtime of the
binary, and re-runs the checks if the binary has changed.
networkxml2argvtest.c creates 2 "artificial" dnsmasqCaps objects at
startup - one "restricted" (doesn't support --bind-dynamic) and one
"full" (does support --bind-dynamic). Some of the test cases use one
and some the other, to make sure both code pathes are tested.
Found by coverity:
Error: REVERSE_INULL (CWE-476):
libvirt-0.10.2/src/util/processinfo.c:141: deref_ptr: Directly
dereferencing pointer "map".
libvirt-0.10.2/src/util/processinfo.c:142: check_after_deref:
Null-checking "map" suggests that it may be null, but it has already
been dereferenced on all paths leading to the check.
The virStateInitialize method and several cgroups methods were
using an 'int privileged' parameter or similar for dual-state
values. These are better represented with the bool type.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
because libvirt_lxc's cgroup mountpoint is what it shown
in /proc/self/cgroup.
we can get container's cgroup through virCgroupNew("/", &group),
add interface virCgroupGetAppRoot to help container to
get it's cgroup.
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
virCgroupGetMemSwapUsage is used to get container's swap usage,
with this interface,we can get swap usage in fuse filesystem.
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
This bug leads to getting incorrect vcpupin information via
qemudDomainGetVcpuPinInfo() API when the number of maximum
cpu on a host falls into a range such as 31 < ncpus < 64.
gcc warning:
left shift count >= width of type
The following bug is such the case
https://bugzilla.redhat.com/show_bug.cgi?id=876415
In virNetDevVethDelete the virRun method will properly report
errors, but when checking the exit status for non-zero exit
code no error is reported
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When failing to create a macvlan interface, make sure the
error message contains the name of the host interface
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
It is possible for there to be deleted timers when we
calculate the next timeout, and they must be skipped.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The event code is a no-op if requested to update a non-existent
timer/handle watch. This makes it hard to detect bugs in the
caller who have passed bogus data. Add a VIR_WARN output in
such cases, since the API does not allow for return errors.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The docs for virDiskNameToIndex claim it ignores partition
numbers. In actual fact though, a code ordering bug means
that a partition number will cause the code to accidentally
multiply the result by 26.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Commit e0c469e58b that fixes the detection
of image chain wasn't complete. Iteration through the backing image
chain has to stop at the last existing image if some of the images are
missing otherwise the backing chain that is cached contains entries with
paths being set to NULL resulting to:
error: Unable to allow access for disk path (null): Bad address
Fortunately stat() is kind enough not to crash when it's presented with
a NULL argument. At least on Linux.
Fixes this error when building with -Werror on Alpine Linux:
util/processinfo.c: In function 'virProcessInfoSetAffinity':
util/processinfo.c:52:5: error: implicit declaration of function 'malloc' [-Werror=implicit-function-declaration]
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
This simplifies the top-level code, at the cost of using a little more
stack space. The primary benefit is being able to send more fields
without knowing in advance how many of them, and of which types, these
fields will be, and without having to individually add buffer variables.
The code imposes an upper limit on the total number of iovs/buffers
used, and fields that wouldn't fit are silently dropped. This is not
significant in this patch, but will affect the following one.
Signed-off-by: Miloslav Trmač <mitr@redhat.com>
... and update all users. No change in functionality, the parameter
will be used later.
The metadata representation is as minimal as possible, but requires
the caller to allocate an array on stack explicitly.
The alternative of using varargs in the virLogMessage() callers:
* Would not allow the caller to optionally omit some metadata elements,
except by having two calls to virLogMessage.
* Would not be as type-safe (e.g. using int vs. size_t), and the compiler
wouldn't be able to do type checking
* Depending on parameter order:
a) virLogMessage(..., message format, message params...,
metadata..., NULL)
can not be portably implemented (parse_printf_format() is a glibc
function)
b) virLogMessage(..., metadata..., NULL,
message format, message params...)
would prevent usage of ATTRIBUTE_FMT_PRINTF and the associated
compiler checking.
Signed-off-by: Miloslav Trmač <mitr@redhat.com>
The "restart" function for locks allocates a new array according to
and pre-sets its length, then reads the owner pids from a JSON
document in a loop. Rather than adding each owner at a different
index, though, it repeatedly overwrites the last element of the array
with all the owners.
82507838 refactored the code to keep both the raw and canonicalized form
of the backingStore, which breaks badly when the storage pool contains a
storage volume, which is missing its backing store file:
# ./daemon/libvirtd -l
2012-11-07 12:43:33.279+0000: 22175: info : libvirt version: 1.0.0
2012-11-07 12:43:33.279+0000: 22175: error : absolutePathFromBaseFile:542 : Can't canonicalize path '/var/lib/libvirt/images/base.qcow2': No such file or directory
2012-11-07 12:43:33.280+0000: 22175: error : storageDriverAutostart:115 : Failed to autostart storage pool 'default': Can't canonicalize path '/var/lib/libvirt/images/base.qcow2': No such file or directory
This is because virStorageFileGetMetadataFromBuf() aborts with -1 if the
filename of the backingStore can not be canonicalized:
#0 absolutePathFromBaseFile () at util/storage_file.c:541
#1 virStorageFileGetMetadataFromBuf () at util/storage_file.c:728
#2 virStorageFileGetMetadataFromFD () at util/storage_file.c:932
#3 virStorageBackendProbeTarget () at storage/storage_backend_fs.c:94
#4 virStorageBackendFileSystemRefresh () at storage/storage_backend_fs.c:849
#5 storagePoolStart () at storage/storage_driver.c:700
#6 virStoragePoolCreate () at libvirt.c:12471
...
Treat files which miss their backing file as standalone files.
Signed-off-by: Philipp Hahn <hahn@univention.de>
Some FDs may not implement fdatasync() functionality,
e.g. pipes. In that case EINVAL or EROFS is returned.
We don't want to fail then nor report any error.
Reported-by: Christophe Fergeau <cfergeau@redhat.com>
The libvirt coding standard is to use 'function(...args...)'
instead of 'function (...args...)'. A non-trivial number of
places did not follow this rule and are fixed in this patch.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
With our fix of mkostemp (pushed as 2b435c15) we define a macro
to compile with uclibc. However, this definition is conditional
and thus needs to be properly indented. Moreover, with this definition
sc_prohibit_mkstemp syntax-check rule keeps yelling:
src/util/logging.c:63:# define mkostemp(x,y) mkstemp(x)
maint.mk: use mkostemp with O_CLOEXEC instead of mkstemp
Therefore we should ignore this file for this rule.
* configure.ac docs/news.html.in libvirt.spec.in: update for the new release
* po/*.po*: update from transifex, a lot of added support e.g. Indian
languages, and regenerate
Currently, when we are doing (managed) save, we insert the
iohelper between the qemu and OS. The pipe is created, the
writing end is passed to qemu and the reading end to the
iohelper. It reads data and write them into given file. However,
with write() being asynchronous data may still be in OS
caches and hence in some (corner) cases, all migration data
may have been read and written (not physically though). So
qemu will report success, as well as iohelper. However, with
some non local filesystems, where ENOSPACE is polled every X
time units, we may get into situation where all operations
succeeded but data hasn't reached the disk. And in fact will
never do. Therefore we ought sync caches to make sure data
has reached the block device on remote host.
virPidFileReadPathIfAlive passed in an 'int *' where a 'pid_t *'
was expected, which breaks on Mingw64 targets. Also a few places
were using '%d' for formatting pid_t, change them to '%lld' and
force a cast to the longer type as done elsewhere in the same
file.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
There are multiple reasons canonicalize_file_name() used in
absolutePathFromBaseFile helper can fail. This patch enhances error
reporting from that helper.
This patch resolves: https://bugzilla.redhat.com/show_bug.cgi?id=871201
If libvirt is restarted after updating the dnsmasq or radvd packages,
a subsequent "virsh net-destroy" will fail to kill the dnsmasq/radvd
process.
The problem is that when libvirtd restarts, it re-reads the dnsmasq
and radvd pidfiles, then does a sanity check on each pid it finds,
including checking that the symbolic link in /proc/$pid/exe actually
points to the same file as the path used by libvirt to execute the
binary in the first place. If this fails, libvirt assumes that the
process is no longer alive.
But if the original binary has been replaced, the link in /proc is set
to "$binarypath (deleted)" (it literally has the string " (deleted)"
appended to the link text stored in the filesystem), so even if a new
binary exists in the same location, attempts to resolve the link will
fail.
In the end, not only is the old dnsmasq/radvd not terminated when the
network is stopped, but a new dnsmasq can't be started when the
network is later restarted (because the original process is still
listening on the ports that the new process wants).
The solution is, when the initial "use stat to check for identical
inodes" check for identity between /proc/$pid/exe and $binpath fails,
to check /proc/$pid/exe for a link ending with " (deleted)" and if so,
truncate that part of the link and compare what's left with the
original binarypath.
A twist to this problem is that on systems with "merged" /sbin and
/usr/sbin (i.e. /sbin is really just a symlink to /usr/sbin; Fedora
17+ is an example of this), libvirt may have started the process using
one path, but /proc/$pid/exe lists a different path (indeed, on F17
this is the case - libvirtd uses /sbin/dnsmasq, but /proc/$pid/exe
shows "/usr/sbin/dnsmasq"). The further bit of code to resolve this is
to call virFileResolveAllLinks() on both the original binarypath and
on the truncated link we read from /proc/$pid/exe, and compare the
results.
The resulting code still succeeds in all the same cases it did before,
but also succeeds if the binary was deleted or replaced after it was
started.
Currently, we use iohelper when saving/restoring a domain.
However, if there's some kind of error (like I/O) it is not
propagated to libvirt. Since it is not qemu who is doing
the actual write() it will not get error. The iohelper does.
Therefore we should check for iohelper errors as it makes
libvirt more user friendly.
In the XML warning, we print a virsh command line that can be used to
edit that XML. This patch prints UUIDs if the entity name contains
special characters (like shell metacharacters, or "--" that would break
parsing of the XML comment). If the entity doesn't have a UUID, just
print the virsh command that can be used to edit it.
This commit changes the behavior of LIBVIRT_DEBUG=1 libvirtd:
$ git show 7022b09111
commit 7022b09111
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Thu Sep 27 13:13:09 2012 +0100
Automatically enable systemd journal logging
Probe to see if the systemd journal is accessible, and if
so enable logging to the journal by default, rather than
stderr (current default under systemd).
Previously 'LIBVIRT_DEBUG=1 /usr/sbin/libvirtd' would show all debug
output to stderr, now it send debug output to the journal.
Only use the journal by default if running in daemon mode, or
if stdin is _not_ a tty. This should make libvirtd launched from
systemd use the journal, but preserve the old behavior in most
situations.
Sometimes it's handy to know how many bits are set.
* src/util/bitmap.h (virBitmapCountBits): New prototype.
(virBitmapNextSetBit): Use correct type.
* src/util/bitmap.c (virBitmapNextSetBit): Likewise.
(virBitmapSetAll): Maintain invariant of clear tail bits.
(virBitmapCountBits): New function.
* src/libvirt_private.syms (bitmap.h): Export it.
* tests/virbitmaptest.c (test2): Test it.
Add utility functions for Open vSwitch to both save
per-port data before a live migration, and restore the
per-port data after a live migration.
Signed-off-by: Kyle Mestery <kmestery@cisco.com>
We put a comment containing "virsh edit <domain_name>" at the start of
the XML. W3C recommendation forbids the use of "--" in comments [1] and
libvirt can't parse it either. This patch omits the domain name if it
contains a double hyphen.
[1] http://www.w3.org/TR/REC-xml/#sec-comments
Yet another instance of where using plain open() mishandles files
that live on root-squash NFS, and where improving the API can
improve the chance of a successful probe.
* src/util/storage_file.h (virStorageFileProbeFormat): Alter
signature.
* src/util/storage_file.c (virStorageFileProbeFormat): Use better
method for opening file.
* src/qemu/qemu_driver.c (qemuDomainGetBlockInfo): Update caller.
* src/storage/storage_backend_fs.c (virStorageBackendProbeTarget):
Likewise.
This fixes the problem reported in:
https://bugzilla.redhat.com/show_bug.cgi?id=868389
Previously, the dnsmasq hosts file (used for static dhcp entries, and
addnhosts file (used for additional dns host entries) were only
created/referenced on the dnsmasq commandline if there was something
to put in them at the time the network was started. Once we can update
a network definition while it's active (which is now possible with
virNetworkUpdate), this is no longer a valid strategy - if there were
0 dhcp static hosts (resulting in no reference to the hosts file on the
commandline), then one was later added, the commandline wouldn't have
linked dnsmasq up to the file, so even though we create it, dnsmasq
doesn't pay any attention.
The solution is to just always create these files and reference them
on the dnsmasq commandline (almost always, anyway). That way dnsmasq
can notice when a new entry is added at runtime (a SIGHUP is sent to
dnsmasq by virNetworkUdpate whenever a host entry is added or removed)
The exception to this is that the dhcp static hosts file isn't created
if there are no lease ranges *and* no static hosts. This is because in
this case dnsmasq won't be setup to listen for dhcp requests anyway -
in that case, if the count of dhcp hosts goes from 0 to 1, dnsmasq
will need to be restarted anyway (to get it listening on the dhcp
port). Likewise, if the dhcp hosts count goes from 1 to 0 (and there
are no dhcp ranges) we need to restart dnsmasq so that it will stop
listening on port 67. These special situations are handled in the
bridge driver's networkUpdate() by checking for ((bool)
nranges||nhosts) both before and after the update, and triggering a
dnsmasq restart if the before and after don't match.
In order to temporarily label files read/write during a commit
operation, we need to crawl the backing chain and find the absolute
file name that needs labeling in the first place, as well as the
name of the file that owns the backing file.
* src/util/storage_file.c (virStorageFileChainLookup): New
function.
* src/util/storage_file.h: Declare it.
* src/libvirt_private.syms (storage_file.h): Export it.
In order to search for a backing file name as literally present
in a chain, we need to remember if the chain had relative names.
Also, searching for absolute names is easier if we only have
to canonicalize once, rather than on every iteration.
* src/util/storage_file.h (_virStorageFileMetadata): Add field.
* src/util/storage_file.c (virStorageFileGetMetadataFromBuf):
(virStorageFileFreeMetadata): Manage it
(absolutePathFromBaseFile): Store absolute names in canonical form.
Requiring pre-allocation was an unusual idiom. It allowed iteration
over the backing chain to use fewer mallocs, but made one-shot
clients harder to read. Also, this makes it easier for a future
patch to move away from opening fds on every iteration over the chain.
* src/util/storage_file.h (virStorageFileGetMetadataFromFD): Alter
signature.
* src/util/storage_file.c (virStorageFileGetMetadataFromFD): Allocate
return value.
(virStorageFileGetMetadata): Update clients.
* src/conf/domain_conf.c (virDomainDiskDefForeachPath): Likewise.
* src/qemu/qemu_driver.c (qemuDomainGetBlockInfo): Likewise.
* src/storage/storage_backend_fs.c (virStorageBackendProbeTarget):
Likewise.
Previously, no one was using virStorageFileGetMetadata, and for good
reason - it couldn't support root-squash NFS. Change the signature
and make it useful to future patches, including enhancing the metadata
to recursively track the entire chain.
* src/util/storage_file.h (_virStorageFileMetadata): Add field.
(virStorageFileGetMetadata): Alter signature.
* src/util/storage_file.c (virStorageFileGetMetadata): Rewrite.
(virStorageFileGetMetadataRecurse): New function.
(virStorageFileFreeMetadata): Handle recursion.
When an image has no backing file, using VIR_STORAGE_FILE_AUTO
for its type is a bit confusing. Additionally, a future patch
would like to reserve a default value for the case of no file
type specified in the XML, but different from the current use
of -1 to imply probing, since probing is not always safe.
Also, a couple of file types were missing compared to supported
code: libxl supports 'vhd', and qemu supports 'fat' for directories
passed through as a file system.
* src/util/storage_file.h (virStorageFileFormat): Add
VIR_STORAGE_FILE_NONE, VIR_STORAGE_FILE_FAT, VIR_STORAGE_FILE_VHD.
* src/util/storage_file.c (virStorageFileMatchesVersion): Match
documentation when version probing not supported.
(cowGetBackingStore, qcowXGetBackingStore, qcow1GetBackingStore)
(qcow2GetBackingStoreFormat, qedGetBackingStore)
(virStorageFileGetMetadataFromBuf)
(virStorageFileGetMetadataFromFD): Take NONE into account.
* src/conf/domain_conf.c (virDomainDiskDefForeachPath): Likewise.
* src/qemu/qemu_driver.c (qemuDomainGetBlockInfo): Likewise.
* src/conf/storage_conf.c (virStorageVolumeFormatFromString): New
function.
(poolTypeInfo): Use it.
Win32 platforms don't have SIGKILL defined, but they do have
SIGABRT. Since our virProcess wrapper treats anything which
isn't SIGTERM/SIGINT as equivalent to SIGKILL, just use
SIGABRT on Win32.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add two new APIs virLockSpaceNewPostExecRestart and
virLockSpacePreExecRestart which allow a virLockSpacePtr
object to be created from a JSON object and saved to a
JSON object, for the purposes of re-exec'ing a process.
As well as saving the state in JSON format, the second
method will disable the O_CLOEXEC flag so that the open
file descriptors are preserved across the process re-exec()
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The previously introduced virFile{Lock,Unlock} APIs provide a
way to acquire/release fcntl() locks on individual files. For
unknown reason though, the POSIX spec says that fcntl() locks
are released when *any* file handle referring to the same path
is closed. In the following sequence
threadA: fd1 = open("foo")
threadB: fd2 = open("foo")
threadA: virFileLock(fd1)
threadB: virFileLock(fd2)
threadB: close(fd2)
you'd expect threadA to come out holding a lock on 'foo', and
indeed it does hold a lock for a very short time. Unfortunately
when threadB does close(fd2) this releases the lock associated
with fd1. For the current libvirt use case for virFileLock -
pidfiles - this doesn't matter since the lock is acquired
at startup while single threaded an never released until
exit.
To provide a more generally useful API though, it is necessary
to introduce a slightly higher level abstraction, which is to
be referred to as a "lockspace". This is to be provided by
a virLockSpacePtr object in src/util/virlockspace.{c,h}. The
core idea is that the lockspace keeps track of what files are
already open+locked. This means that when a 2nd thread comes
along and tries to acquire a lock, it doesn't end up opening
and closing a new FD. The lockspace just checks the current
list of held locks and immediately returns VIR_ERR_RESOURCE_BUSY.
NB, the API as it stands is designed on the basis that the
files being locked are not being otherwise opened and used
by the application code. One approach to using this API is to
acquire locks based on a hash of the filepath.
eg to lock /var/lib/libvirt/images/foo.img the application
might do
virLockSpacePtr lockspace = virLockSpaceNew("/var/lib/libvirt/imagelocks");
lockname = md5sum("/var/lib/libvirt/images/foo.img");
virLockSpaceAcquireLock(lockspace, lockname);
NB, in this example, the caller should ensure that the path
is canonicalized before calculating the checksum.
It is also possible to do locks directly on resources by
using a NULL lockspace directory and then using the file
path as the lock name eg
virLockSpacePtr lockspace = virLockSpaceNew(NULL);
virLockSpaceAcquireLock(lockspace, "/var/lib/libvirt/images/foo.img");
This is only safe to do though if no other part of the process
will be opening the files. This will be the case when this
code is used inside the soon-to-be-reposted virlockd daemon
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Commit e8fd8757c8 changed 'const char *'
category to virLogSource enum. This changes it in virLogEatParams as
well, thus fixing the build with --disable-debug.
--
Hopefully moving the enum declarations is less ugly than using int.
All USB device lookup functions emit an error when they cannot find the
requested device. With this patch, their caller can choose if a missing
device is an error or normal condition.
Currently virNetSocketNew fails because virSetCloseExec fails as there
is no proper implementation for it on Windows at the moment. Workaround
this by pretending that setting close-on-exec on the fd works. This can
be done because libvirt currently lacks the ability to create child
processes on Windows anyway. So there is no point in failing to set a
flag that isn't useful at the moment anyway.
The code was reporting raw exit status without decoding it into
normal vs. signal exit. virCommandRun already does this, but
with a different error type, so all we have to do is recast
the error to the correct type.
Reported by li guang.
* src/util/hooks.c (virHookCall): Simplify.
This patch updates virGetUserID and virGetGroupID to be able to parse a
user or group name in a similar way to coreutils' chown. This means that
a numeric value with a leading plus sign is always parsed as an ID,
otherwise the functions try to parse the input first as a user or group
name and if this fails they try to parse it as an ID.
This patch includes Peter Krempa's changes to correctly handle errors
returned by getpwnam_r and getgrnam_r.
The output buffer for virFileReadAll was too small for systems with
more than 30 CPUs which leads to a log entry and incorrect behavior.
The new size will be sufficient for the current
architectural limits.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Correct the check for the return value of virStrcpyStatic()
when copying port-profile names. Fixes Open vSwitch ports
which utilize port-profiles from network definitions.
Signed-off-by: Kyle Mestery <kmestery@cisco.com>
Commit f6430390 broke builds on RHEL 5, where glibc (2.5) is too
old to support mkostemp (2.7) or htole64 (2.9). While gnulib
has mkostemp, it still lacks htole64; and it's not worth dragging
in replacements on systems where journald is unlikely to exist
in the first place, so we just use an extra configure-time check
as our witness of whether to attempt compiling the code.
* src/util/logging.c (virLogParseOutputs): Don't attempt to
compile journald on older glibc.
* configure.ac (AC_CHECK_DECLS): Check for htole64.
Add support for logging to the systemd journal, using its
simple client library. The benefit over syslog is that it
accepts structured log data, so the journald can store
individual items like code file/line/func separately from
the string message. Tools which require structured log
data can then query the journal to extract exactly what
they desire without resorting to string parsing
While systemd provides a simple client library for logging,
it is more convenient for libvirt to directly write its
own client code. This lets us build up the iovec's on
the stack, avoiding the need to alloc memory when writing
log messages.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The 'const char *category' parameter only has a few possible
values now that the filename has been separated. Turn this
parameter into an enum instead.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently the logging APIs have a 'const char *category' parameter
which indicates where the log message comes from. This is typically
a combination of the __FILE__ string and other prefix. Split the
__FILE__ off into a dedicated parameter so it can passed to the
log outputs
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
General whitespace cleanup in the logging files
- Move '{' to a new line after funtion declaration
- Put each parameter on a new line to avoid long lines
- Put return type on new line
- Leave 2 blank lines between functions
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The log destinations are an enum, but most of the code was
just using a plain 'int' for function params / variables.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The __LINE__ macro value is specified to fit in the size_t
type, so use that instead of 'long long' in the logging code
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The log priority levels are an enum, but most of the code was
just using a plain 'int' for function params / variables.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
I hit this problem recently when trying to create a bridge with an IPv6
address on a 3.2 kernel: dnsmasq (and, further, radvd) would not bind to
the given address, waiting 20s and then giving up with -EADDRNOTAVAIL
(resp. exiting immediately with "error parsing or activating the config
file", without libvirt noticing it, BTW). This can be reproduced with (I
think) any kernel >= 2.6.39 and the following XML (to be used with
"virsh net-create"):
<network>
<name>test-bridge</name>
<bridge name='testbr0' />
<ip family='ipv6' address='fd00::1' prefix='64'>
</ip>
</network>
(it happens even when you have an IPv4, too)
The problem is that since commit [1] (which, ironically, was made to
“help IPv6 autoconfiguration”) the linux bridge code makes bridges
behave like “real” devices regarding carrier detection. This makes the
bridges created by libvirt, which are started without any up devices,
stay with the NO-CARRIER flag set, and thus prevents DAD (Duplicate
address detection) from happening, thus letting the IPv6 address flagged
as “tentative”. Such addresses cannot be bound to (see RFC 2462), so
dnsmasq fails binding to it (for radvd, it detects that "interface XXX
is not RUNNING", thus that "interface XXX does not exist, ignoring the
interface" (sic)). It seems that this behavior was enhanced somehow with
commit [2] by avoiding setting NO-CARRIER on empty bridges, but I
couldn't reproduce this behavior on my kernel. Anyway, with the “dummy
tap to set MAC address” trick, this wouldn't work.
To fix this, the idea is to get the bridge's attached device to be up so
that DAD can happen (deactivating DAD altogether is not a good idea, I
think). Currently, libvirt creates a dummy TAP device to set the MAC
address of the bridge, keeping it down. But even if we set this device
up, it is not RUNNING as soon as the tap file descriptor attached to it
is closed, thus still preventing DAD. So, we must modify the API a bit,
so that we can get the fd, keep the tap device persistent, run the
daemons, and close it after DAD has taken place. After that, the bridge
will be flagged NO-CARRIER again, but the daemons will be running, even
if not happy about the device's state (but we don't really care about
the bridge's daemons doing anything when no up interface is connected to
it).
Other solutions that I envisioned were:
* Keeping the *-nic interface up: this would waste an fd for each
bridge during all its life. May be acceptable, I don't really
know.
* Stop using the dummy tap trick, and set the MAC address directly
on the bridge: it is possible since quite some time it seems,
even if then there is the problem of the bridge not being
RUNNING when empty, contrary to what [2] says, so this will need
fixing (and this fix only happened in 3.1, so it wouldn't work
for 2.6.39)
* Using the --interface option of dnsmasq, but I saw somewhere
that it's not used by libvirt for backward compatibility. I am
not sure this would solve this problem, though, as I don't know
how dnsmasq binds itself to it with this option.
This is why this patch does what's described earlier.
This patch also makes radvd start even if the interface is
“missing” (i.e. it is not RUNNING), as it daemonizes before binding to
it, and thus sometimes does it after the interface has been brought down
by us (by closing the tap fd), and then originally stops. This also
makes it stop yelling about it in the logs when the interface is down at
a later time.
[1]
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=commit;h=1faa4356a3bd89ea11fb92752d897cff3a20ec0e
[2]
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=commit;h=b64b73d7d0c480f75684519c6134e79d50c1b341
In addition to the preformatted text line, pass the raw message as well,
to allow the output functions to use a different output format.
Signed-off-by: Miloslav Trmač <mitr@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Allow for the code converting from libvirt log levels to syslog
log levels to be reused.
Signed-off-by: Miloslav Trmač <mitr@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
In the cgroups APIs we have a virCgroupKillPainfully function
which does the loop sending SIGTERM, then SIGKILL and waiting
for the process to exit. There is similar functionality for
simple processes in qemuProcessKill, but it is tangled with
the QEMU code. Untangle it to provide a virProcessKillPainfuly
function
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Continue consolidation of process functions by moving some
helpers out of command.{c,h} into virprocess.{c,h}
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
There are a number of process related functions spread
across multiple files. Start to consolidate them by
creating a virprocess.{c,h} file
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virCommand prefix was inappropriate because the API
does not use any virCommandPtr object instance. This
API closely related to waitpid/exit, so use virProcess
as the prefix
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Nothing uses the return value, and creating it requries otherwise
unnecessary strlen () calls.
This cleanup is conceptually independent from the rest of the series
(although the later patches won't apply without it). This just seems
a good opportunity to clean this up, instead of entrenching the unnecessary
return value in the virLogOutputFunc instance that will be added in this
series.
Signed-off-by: Miloslav Trmač <mitr@redhat.com>
When auto-probing hypervisor drivers, the conn->uri field will
initially be NULL. Care must be taken not to access members
when doing auth lookups in the config file
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
https://www.gnu.org/licenses/gpl-howto.html recommends that
the 'If not, see <url>.' phrase be a separate sentence.
* tests/securityselinuxhelper.c: Remove doubled line.
* tests/securityselinuxtest.c: Likewise.
* globally: s/; If/. If/
Commit ee3d3893 missed the fact that (unsigned char)<<(int)
is truncated to int, and therefore failed for any bitmap data
longer than four bytes.
Also, I failed to run 'make syntax-check' on my commit 4bba6579;
for whatever odd reason, ffs lives in a different header than ffsl.
* src/util/bitmap.c (virBitmapNewData): Use correct shift type.
(includes): Glibc (and therefore gnulib) decided ffs is in
<strings.h>, but ffsl is in <string.h>.
* tests/virbitmaptest.c (test5): Test it.
Commit 0fc89098 used functions only available on glibc, completely
botched 32-bit environments, and risked SIGBUS due to unaligned
memory access on platforms that aren't as forgiving as x86_64.
* bootstrap.conf (gnulib_modules): Import ffsl.
* src/util/bitmap.c (includes): Use <strings.h> for ffsl.
(virBitmapNewData, virBitmapToData): Avoid 64-bit assumptions and
non-portable functions.
Two changes are introduced in this patch:
- The first change removes ATTRIBUTE_RETURN_CHECK from
virNetDevBandwidthClear, because it was called with ignore_value
always, anyway. The function is used even when it's not necessary
to call it, just for cleanup purposes.
- The second change is added ignoring of the command's exit status,
since it may report an error even when run just as "to be sure we
clean up" function. No libvirt errors are suppresed by this.
Validates the wwn while parsing, error out if it's malformed.
* src/util/util.h: Declare virValidateWWN
* src/util/util.c: Implement virValidateWWN
* src/libvirt_private.syms: Export virValidateWWN.
* src/conf/domain_conf.h: New member 'wwn' for disk def.
* src/conf/domain_conf.c: Parse and format disk <wwn>
In many places we store bitmap info in a chunk of data
(pointed to by a char *), and have redundant codes to
set/unset bits. This patch extends virBitmap, and convert
those codes to use virBitmap in subsequent patches.
The introduction of /sys/fs/cgroup came in fairly recent kernels.
Prior to that time distros would pick a custom directory like
/cgroup or /dev/cgroup. We need to auto-detect where this is,
rather than hardcoding it
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This patch adds a helper to deal with assigning values to
virTypedParameter structures from strings. The helper parses the value
from the string and assigns it to the corresponding union value.
FreeBSD and OpenBSD have a <net/if.h> that is not self-contained;
and mingw lacks the header altogether. But gnulib has just taken
care of that for us, so we might as well simplify our code. In
the process, I got a syntax-check failure if we don't also take
the gnulib execinfo module.
* .gnulib: Update to latest, for execinfo and net_if.
* bootstrap.conf (gnulib_modules): Add execinfo and net_if modules.
* configure.ac: Let gnulib check for headers. Simplify check for
'struct ifreq', while also including enough prereq headers.
* src/internal.h (IF_NAMESIZE): Drop, now that gnulib guarantees it.
* src/nwfilter/nwfilter_learnipaddr.h: Use correct header for
IF_NAMESIZE.
* src/util/virnetdev.c (includes): Assume <net/if.h> exists.
* src/util/virnetdevbridge.c (includes): Likewise.
* src/util/virnetdevtap.c (includes): Likewise.
* src/util/logging.c (includes): Assume <execinfo.h> exists.
(virLogStackTraceToFd): Handle gnulib's fallback implementation.
This fixes https://bugzilla.redhat.com/show_bug.cgi?id=852984
If a network or interface is configured to use Open vSwitch, but
ovs-vswitchd (the Open vSwitch database service) isn't running, the
ovs-vsctl add-port/del-port commands will hang indefinitely rather
than returning an error. There is a --nowait option, but that appears
to have no effect on add-port and del-port commands, so instead we add
a --timeout=5 to the commands - they will retry for up to 5 seconds,
then fail if there is no response.
On OpenBSD, clock_gettime() exists in libc rather than librt, and
blindly linking with -lrt made the build fail. Gnulib already
did the work for determining which libraries to use, so we should
reuse that work rather than doing it ourselves.
* bootstrap.conf (gnulib_modules): Pull in clock-time.
* configure.ac (RT_LIBS): Drop.
* src/Makefile.am (libvirt_util_la_LIBADD): Use gnulib variable
instead.
* src/util/virtime.c (includes): Simplify.
Without this patch, logged command executions can be ambiguous if
the command contained any shell metacharacters. This has caused
more than one person to attempt to patch clients to add unnecessary
quoting, without realizing that the command itself was run with
correct args, and only the logged output was ambiguous.
* src/util/command.c (virCommandToString): Add shell escapes.
* tests/commandtest.c (test16): Test new behavior.
* tests/commanddata/test16.log: Update expected output.
* tests/qemuxml2argvdata/qemuxml2argv-*.args: Likewise.
* tests/networkxml2argvdata/*.argv: Likewise.
The codes were updated to allow to reset the device as long as
there is no devices/functions behind the same bus. However, the
comments were kept without touched.
On NUMA machine, the length of string got from file
cpuacct.usage_percpu is quite large, so expand the
limit of 1024 bytes.
errors like:
Failed to read file \
'/cgroup/cpuacct/libvirt/qemu/rhel6q/cpuacct.usage_percpu': \
Value too large for defined data type
The introduction of the new VLAN code, along with the fix
from 5e465df6be, caused the
addition of OVS ports to fail with the following message:
ovs-vsctl: 00002|vsctl|ERR|: missing column name
This fix takes into account the VLAN arguments are optional,
and correctly sets up the command line to run the "ovs-vsctl"
command to add ports to the OVS bridge.
Signed-off-by: Kyle Mestery <kmestery@cisco.com>
CC: Eric Blake <eblake@redhat.com>
If a 8021.Qbh network device supports SRIOV and its VF is being used
in pci passthrough mode, when the guest is shutdown or destroyed, the
PF inteface is also brought down. qemuDomainHostdevNetConfigRestore()
finds out the PF for provided hostdev (which is VF) and passes it to
virNetDevPortProfileDisassociate() as linkdev. Later, linkdev gets passed
to virNetDevSetOnline() where the interface is brought down by clearing
IFF_UP flag.
Bringing down a PF, when only VF is being brought down is not expected
behavior. This patch adds a check so that virNetDevSetOnline() is called
only for PF and not if device is a VF.
Signed-off-by: Nishank Trivedi <nistrive@cisco.com>
Fixup buffer usage when handling VLANs. Also fix the logic
used to determine if the virNetDevVlanPtr is valid or not.
Fixes crashes in the latest code when using Open vSwitch
virtualports.
Signed-off-by: Kyle Mestery <kmestery@cisco.com>
* src/util/virnetdevopenvswitch.c (virNetDevOpenvswitchAddPort): avoid libvirtd
crash due to derefing a NULL virtVlan->tag.
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=852383
Signed-off-by: Alex Jia <ajia@redhat.com>
getpwuid_r returns success but sets the return structure to NULL when it
fails to deliver data about the requested uid. In our helper code this
created following strange error messages:
" ... cannot getpwuid_r(1234): Success"
This patch creates a more helpful message:
" ... getpwuid_r failed to retrieve data for uid '1234'"
Previous commit 0b4b53bb80 defined 'inline' to prevent broken build on
systems with libnl1 headers. However, it broke build on systems with
libnl3 headers. Therefore we must make that fix conditional.
Ubuntu 10.04 shipped with out-of-the-box libnl1 headers, which
assumed the old gcc semantics of 'extern inline' as a C89 extension:
the function will _always_ be inline if it is used, and that
it may be declared extern inline in headers without a definition,
as long as the definition occurs before any use. But when C99
added 'extern inline' as a mandatory feature of the language, with
slightly different semantics than gcc (the function MUST have
external linkage, and the inline definition MUST be present
alongside any declaration, where the compiler can then choose
which of the two versions to use), this rendered the use of
'inline' in libnl's header obsolete. Most distros already solved
this by removing 'inline' (the resulting 'extern' is correct,
regardless of gcc semantics), and libnl-3 does not have the
problem (where it has switched to 'static inline' instead, again
with the definition present, and again, our hack will result in
plain 'static' with no ill effects). But for the case of building
out of the box, we hack around the broken Ubuntu header.
* src/util/virnetlink.h: Work around libnl issue.
Currently, when guest agent is configured but not responsive
(e.g. due to appropriate service not running in the guest)
we return VIR_ERR_INTERNAL_ERROR. Both are wrong. Therefore
we need to introduce new error code to reflect this case.
libvirt's network config documents that a bridge's STP "forward delay"
(called "delay" in the XML) should be specified in seconds, but
virNetDevBridgeSetSTPDelay() assumes that it is given a delay in
milliseconds (although the comment at the top of the function
incorrectly says "seconds".
This fixes the comment, and converts the delay to milliseconds before
calling virNetDevBridgeSetSTPDelay().
Several VIR_DEBUG()'s were changed to VIR_WARN() while I was testing
the firewalld support patch, and I neglected to change them back
before I pushed.
In the meantime I've decided that it would be useful to have them be
VIR_INFO(), just so there will be logged evidence of which method is
being used (firewall-cmd vs. (eb|ip)tables) without needing to crank
logging to 11. (at most this adds 2 lines to libvirtd's logs per
libvirtd start).
The virNetlinkEventAddClient / virNetlinkEventRemoveClient stub
impls had syntax errors in their parameter lists, using a ')'
after the second-to-last parameter instead of a ','
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This patch introduce virNetlinkEventServiceStopAll() to stop
all the monitors to receive netlink messages for libvirtd.
Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
This patch improve all the API in virnetlink.c to support
all kinds of netlink protocols, and make all netlink sockets
be able to join in groups.
Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
