The %meson* macros pass --auto-features=enabled to enable all "auto"
features, which means we have to explicitly disable them.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
All supported versions of Fedora and RHEL >= 9.0 support
/dev/userfaultfd.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This option controls whether the sysctl config for enabling unprivileged
userfaultfd will be installed.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
/dev/userfaultfd device is preferred over userfaultfd syscall for
post-copy migrations. Unless qemu driver is configured to disable mount
namespace or to forbid access to /dev/userfaultfd in cgroup_device_acl,
we will copy it to the limited /dev filesystem QEMU will have access to
and label it appropriately. So in the default configuration post-copy
migration will be allowed even without enabling
vm.unprivileged_userfaultfd sysctl.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The prefix needs to be dropped for the redirects to work properly once
hosting 'libvirt.org' via gitlab pages.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Our virSecret XML is still parsed and formatted using old way
(e.g. virXPathString() + virXXXTypeFromString() combo, or
formatting elements using plain virBufferAsprintf() instead of
virXMLFormatElement()). Modernize the code as it'll make it
easier for future expansion.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the field and adjust the XML parsers to use
virXMLPropEnum().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The virSecretDefParseUsage() function is called conditionally.
Call it unconditionally and keep pointer to the <usage/> node as
it'll come handy soon.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When adding vtpm virSecret usage type (in v5.6.0-rc1~61) we
forgot to update polkit access check. This limited user's ability
to match secrets in their rules. Add missing case into switch in
virAccessDriverPolkitCheckSecret().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Previously we were only starting or stopping nbdkit when the guest was
started or stopped or when hotplugging/unplugging a disk. But when doing
block operations, the disk backing store sources can also be be added or
removed independently of the disk device. When this happens the nbdkit
backend was not being handled properly. For example, when doing a
blockcopy from a nbdkit-backed disk to a new disk and pivoting to that
new location, the nbdkit process did not get cleaned up properly. Add
some functionality to qemuDomainStorageSourceAccessModify() to handle
this scenario.
Since we're now starting nbdkit from the ChainAccessAllow/Revoke()
functions, we no longer need to explicitly start nbdkit in hotplug code
paths because the hotplug functions already call these allow/revoke
functions and will start/stop nbdkit if necessary.
Add a check to qemuNbdkitProcessStart() to report an error if we
are trying to start nbdkit for a disk source that already has a running
nbdkit process. This shouldn't happen, and if it does it indicates an
error in another part of our code.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When starting nbdkit processes for the backing store of a disk, we were
returning an error if any backing store failed, but we were not cleaning
up processes that succeeded higher in the chain. Make sure that if we
return a failure status from qemuNbdkitStartStorageSource() that we roll
back any processes that had been started.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This will allow us to start or stop nbdkit for just a single disk source
or for every source in the backing chain. This will be used in following
patches.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The existing capabilities were generated against a build made
quite early in the QEMU 8.1.0 development cycle. Update them
to match the final release.
A notable effect of this is that the recently introduced
s390-usb-model test now passes instead of failing: QEMU 8.1.0
enables several new devices on s390x, including the qemu-xhci
USB controller.
There's a small amount of additional churn caused by the fact
that the machine on which I have generated these capabilities
is apparently slightly less fancy than the one used originally.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Show what happens when trying to use a specific type of USB
controller. This currently fails because the QEMU binary doesn't
include the necessary device.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
These tests currently cover the scenarios in which the guest
can end up with no USB controller, one of which is specific
to s390x. We are going to add more USB on s390x scenarios, so
a different naming convention is needed.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Previously this test only tested the generated nbdkit command for the
top level disk source. Update it to test the generated commmands for all
sources in the chain.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Regenerate the ci files using the latest libvirt-ci:
commit 5b9b11261fa28cae964fd91638056318f270e300
examples: illustrate use of remote project reference
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
libvirt commit 120a674f25
ci: lcitool: Maintain project package deps lists here
added an override file for lcitool in August, but nobody regenerating
libvirt's ci files from the manifest seemed to use the override dir.
libvirt-ci commit 1f4184edfdd541964a187810b34ac4c7702b6577
commandline: set --extra-data-dir default path
from January made $PWD/ci/lcitool the default.
Reflect the changes made in libvirt-ci's repo here too.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
I've seen examples in the wild of the cluster attribute having
non-zero value on x86_64.
This is obviously quite confusing, but it's the information that
Linux exposes to userspace and we don't really have a way to tell
apart a valid die/cluster ID from a dummy one.
What ultimately matters is that the underlying assumptions about
topology are respected, which they are: in the x86_64 cases that
I have analyzed, for example, each "cluster" contained exactly
one core, so any program that would use this information to
influence guest topology decisions would be unaffected by the
additional level showing up in the hierarchy.
In an attempt to reduce confusion, remove any reference to any
specific value for the attributes having any special meaning
attached to it.
In fact, since there are plans to make it possible to create
guests with multiple CPU clusters on x86_64, rework the note
into a more generic warning cautioning users that an attribute
showing up here does not imply that the same attribute can be
used when defining a guest CPU topology.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
To allow reuse of this template as-is in libvirt-wiki, we need to be
able to specify a distinct asset_href_base and link_href_base. Adjust
the template to allow that.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Propagate it as a parameter both from site.xsl and from newapi.xsl, the
latter of which declared it as a variable.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the few generic styles to the appropriate document. 'libvirt.css'
will now be a compilation of styles related only to libvirt.org.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'table tbody td.y' and 'table tbody td.n' selectors don't exist
since commit 8841302e3d which converted
the table to rST.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Separate the styles related to the main page template and the build
process specifics (docutils-originated) into a separate CSS file.
Hint: Best viewed with 'git show --color-moved=blocks'
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Separate the libvirt.org specific stuff from the main template style so
that the latter can be reused in libvirt-wiki without modification.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In order to promote simple assets sharing between main libvirt web and
the libvirt-wiki separate the virt tools blog feed loader from the main
code used for search.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
New docutils generates a <section> element rather than a <div
class='section'> as it did before thus breaking our headerlink
generator.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The redirect to the 'maven' repository of libvirt doesn't work currently
for libvirt pages as the ':splat' replacement doesn't match due to a
missing '/'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some of our examples use GNU/Linux extensions functions/variables:
1) domtop.c uses usleep(3),
2) logging.c uses getopt(3).
Put _GNU_SOURCE definition at the top of corresponding files so
that users can just grab the code and compile it (in contrast
with the rest of the code where _GNU_SOURCE is declared in
meson-config.h).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The virshGetDBusDisplay() function is declared to return a
pointer and yet, in one error path false is returned. Switch the
statement to return NULL, which is what other error paths use to
indicate an error.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch adds a new attribute "register" to the <domain> element. If
set to "yes", the DNS server created for the virtual network is
registered with systemd-resolved as a name server for the associated
domain. The names known to the dnsmasq process serving DNS and DHCP
requests for the virtual network will then be resolvable from the host
by appending the domain name to them.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When checking for machined we do not really care whether systemd itself
is running, we just need machined to be either running or socket
activated by systemd. That is, exactly the same we do for logind.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After previous cleanups, qemuMonitorIOWriteWithFD() is but a thin wrapper
over virSocketSendMsgWithFDs(). Replace the body of the former
with a call to the latter.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After previous cleanups, virSocketSendFD() is but a thin wrapper
over virSocketSendMsgWithFDs(). Replace the body of the former
with a call to the latter.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Instead of using strlen() to calculate length of payload we're
sending, let caller specify the size: they may want to send just
a portion of a buffer (even though the only current user
doesn't).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Currently, virSocketSendMsgWithFDs() reports two errors:
1) if CMSG_FIRSTHDR() fails,
2) if sendmsg() fails.
Well, the latter sets an errno, so caller can just use
virReportSystemError(). And the former - it is very unlikely to
fail because memory for whole control message was allocated just
a few lines above.
The motivation is to unify behavior of virSocketSendMsgWithFDs()
and virSocketSendFD() because the latter is just a subset of the
former (will be addressed later).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The admin connection defaults to the system-wide 'libvirtd' daemon to
manage (libvirtd:///system). As we've now switched to modular daemons
this will not work for most users out of the box:
$ virt-admin version
error: Failed to connect to the admin server
error: no valid connection
error: Failed to connect socket to '/run/user/1000/libvirt/libvirt-admin-sock': No such file or directory
As we don't want to assume which daemon the user wants to manage in the
modular topology there's no reasonable default to pick.
Give a hint to the users to use the '-c' if the connection to the
default URI fails:
$ virt-admin version
NOTE: Connecting to default daemon. Specify daemon using '-c' (e.g. virtqemud:///system)
error: Failed to connect to the admin server
error: no valid connection
error: Failed to connect socket to '/run/user/1000/libvirt/libvirt-admin-sock': No such file or directory
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
The 'raw' driver without any special configuration is not needed and
creates overhead in qemu.
Stop using the 'raw' format driver in cases when it's not needed. A
special case when it is needed is for FD passed images with only a
single writable FD passed, where we need an overlay driver to properly
reflect the 'read-only' flag.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>