Generated using the following spatch:
@@
expression path;
@@
- virFileMakePath(path)
+ g_mkdir_with_parents(path, 0777)
However, 14 occurrences were not replaced, e.g. in
virHostdevManagerNew(). I don't really understand why.
Fixed by hand afterwards.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
These functions are identical. Made using this spatch:
@@
expression path, mode;
@@
- virFileMakePathWithMode(path, mode)
+ g_mkdir_with_parents(path, mode)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Refractoring includes:
* removal of VIR_FREE
* inversion of the condition
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Previous commit removed all usage of this function so we can remove it.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Before the conversion to using systemd DBus API to set the cpu.shares
there was some magic conversion done by kernel which was documented in
virsh manpage as well. Now systemd errors out if the value is out of
range.
Since we enforce the range for other cpu cgroup attributes 'quota' and
'period' it makes sense to do the same for 'shares' as well.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Trying to report an OOM error is pointless since our infrastructure to
report error needs to allocate memory to report the error.
In addition our code mistakenly reported OOM errors even in cases where
a function could fail for another reason, which would make issues harder
to debug.
Remove the virReportOOMError and backend so that programmers are forced
to think about what can happen. In case when there's another failure
possible a specific error should be reported and otherwise a direct
abort() is better since the logger would abort on g_new anyways.
This patch also removes the syntas-check which forces use of
virReportOOMError instead of using VIR_ERR_NO_MEMORY with other
functions. This allows possible future use when we'd end up in a
situation where trying to recover from an OOM would make sense, such as
when attempting to allocate a massive buffer.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
The yajl library returns a wide range of error codes so reporting OOM on
any failure is wrong. In case the error was really based by memory issue
the error reporting will probably cause an abort anyways. Change the
error message so that we know that it happened in JSON at least.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
If the argument of 'xmlSaveUri' is non-NULL the function returns NULL on
OOM failure only. Thus we can directly abort rather than try to do the
impossible recovery.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Add a wrapper that will handle the out of memory condition by abort()
and also prevents callers from having to typecast the argument.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
'xmlBufferCreate' returns NULL only on allocation failure. Add a wrapper
which will call 'abort()' in such case in a centralised spot. It doesn't
make much sense to continue execution from here.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
The function is used in many places and fails only on allocation
failures. Since trying to recover from allocation failure of a small
buffer by reporting error doesn't make sense add a wrapper for
'nlmsg_alloc_simple' which will 'abort()' on failure and replace all
allocations of netlink message with the new helper.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
There's nothing that would set the 'err' field of virFirewallPtr to
ENOMEM so we can remove the checks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
VIR_APPEND_ELEMENT_COPY will abort the program on OOM so there's no need
to check.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
The function can't fail nowadays, remove the return value and adjust
callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Get the buffer contents into a temporary variable with automatic
clearing so that the error branches don't have to reset the buffer.
Additionally handle the NULL string case before assignment.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
The function is supposed to always consume the passed environment
variable string. Use a temp variable with autofree and g_steal_pointer
to prevent having to free it manually.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
This function finds "swtmp", "swtpm_setup" and "swtpm_ioctl"
binaries in $PATH and stores resolved paths in global variables
so that they can be obtainer later. Anyway, the resolved path is
marked as g_autofree and to avoid its freeing later on in the
function the variable is set to NULL manually. Well, we have
g_steal_pointer() for that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This change will allow us to remove PCI devices from a list
without the need of a PCI Device object, which will be need
in the next patch.
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
We're going to need a way to remove a PCI Device from a list without having
a valid virPCIDevicePtr, because the device is missing from the host. This
means that virPCIDevicesListDel() must operate with a PCI Device address
instead.
Turns out that virPCIDevicesListDel() and its related functions only use
the virPCIDeviceAddressPtr of the virPCIDevicePtr, so this change is
simple to do and will not cause hassle in all other callers. Let's
start adapting virPCIDeviceListFindIndex() and crawl our way up to
virPCIDevicesListDel().
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
We're going to add logic to handle the case where a previously
existing PCI device does not longer exist in the host.
The logic was copied from virPCIDeviceNew(), which verifies if a
PCI device exists in the host, returning NULL and throwing an
error if it doesn't. The NULL is used for other errors as well
(product/vendor id read errors, dev id overflow), meaning that we
can't re-use virPCIDeviceNew() for the purpose of detecting
if the device exists.
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Via coccinelle (not the handbag!)
spatches used:
@ rule1 @
identifier a, b;
symbol NULL;
@@
- b = a;
... when != a
- a = NULL;
+ b = g_steal_pointer(&a);
@@
- *b = a;
... when != a
- a = NULL;
+ *b = g_steal_pointer(&a);
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The function calls virJSONValueObjectAppend/virJSONValueArrayAppend, so
by taking a double pointer we can drop the pointer clearing from
callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Avoid pointless copies of temporary strings when constructing number
JSON objects.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virJSONValueNew* won't return error nowadays so NULL checks are not
necessary. The memory can be cleared via g_autoptr.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The parent array takes ownership of the inserted value once all checks
pass. Don't make the callers second-guess when that happens and modify
the function to take a double pointer so that it can be cleared once the
ownership is taken.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use automatic memory freeing and don't check return value of
virJSONValueNewString as it can't fail.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The parent object takes ownership of the inserted value once all checks
pass. Don't make the callers second-guess when that happens and modify
the function to take a double pointer so that it can be cleared once the
ownership is taken.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use g_autoptr for the JSON value objects and remove the cleanup label
and inline freeing of objects.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use g_autofree for the pointer of the added object and remove the NULL
checks for values returned by virJSONValueNew* (except
virJSONValueNewNumberDouble) since they can't fail nowadays.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We know the exact number of keys or array members for the copied objects
so we can pre-allocate the arrays rather than inserting into them in a
loop incurring realloc copy penalty.
Also virJSONValueCopy now can't fail since all of the functions
allocating the different cases use just g_new/g_strdup internally so we
can remove the NULL checks from the recursive calls.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The function takes ownership of @value on success so the proper
semantics will be to clear out the @value pointer. Convert @value to a
double pointer to do this.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
* src/util/virsocket.c (virSocketRecvFD): Set msg.msg_controllen as documented
in the man pages.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
All callers are now using the on|off syntax, so yes|no is a unreachable
code path.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
QEMU has long accepted many different values for boolean properties, but
set accepted has been different depending on which QEMU parser you hit.
The on|off values were supported by all QEMU parsers. The yes|no, y|n,
true|false values were only partially supported:
https://lists.gnu.org/archive/html/qemu-devel/2020-11/msg01012.html
Thus we should standardize on on|off everywhere since that is most
widely supported in QEMU.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
QEMU has long accepted many different values for boolean properties, but
set accepted has been different depending on which QEMU parser you hit.
The on|off values were supported by all QEMU parsers. The yes|no, y|n,
true|false values were only partially supported:
https://lists.gnu.org/archive/html/qemu-devel/2020-11/msg01012.html
Thus we should standardize on on|off everywhere since that is most
widely supported in QEMU.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
