The test takes more than a second on a beefy machine. While it's more
useful than some expensive tests it's not worth running all the time.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Related issue: https://gitlab.com/libvirt/libvirt/-/issues/16
Added in support for the following parameters in attach-disk:
--source-protocol
--source-host-name
--source-host-socket
--source-host-transport
Added documentation to virsh.rst specifying usage.
Signed-off-by: Ryan Gahagan <rgahagan@cs.utexas.edu>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Convert the code to the new XML formatting approach for simpler code and
future additions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
For extendability and clarity add enum virshAttachDiskSourceType and
use it to drive the XML formatting.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The helper started as helper for cmdAttachDisk but is now used outside
of it too.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Use 'virshAddress' prefix for all the related structs and enums.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Rewrite and rename the address parser.
As a fallout the use of the removed 'str2PCIAddress' is replaced by
virshAddressParse and virshAddressFormat.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
DISK_ADDR_TYPE_SATA, DISK_ADDR_TYPE_IDE and DISK_ADDR_TYPE_SCSI are
driven by basically identical data types. Unify them. Note that
changes to 'str2DiskAddress' are deliberately lazy as it will be
refactored later.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Introduce virshAddressFormat with code from cmdAttachDiskFormatAddress
to format the address.
Note that this patch fixes some whitespace inconsistencies in the
formatted addresses.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
First step is to remove all of the address handling code to a new
function called 'cmdAttachDiskFormatAddress'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
'virsh attach-disk' uses stat() to determine if the 'source' is a
regular file. If stat fails though it assumes that the file is block.
Since it's way more common to have regular files and the detection does
not work at all when accessing a remote host, modify the default to
assume type='file' by default.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Remove the unnecessary 'cleanup:' label since we can directly return as
the memory clearing is now automated.
We can also remove the 'functionReturn' variable and use the usual
pattern of returning success.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The test uses a script and compares the output against a template file.
VIR_TEST_REGENREATE_OUTPUT can be used on test failures. This test will
be marked as expensive once the refactors it guards are done.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The ESP SCSI controllers (NCR53C90, DC390, AM53C974) have the same
requirement as the LSI Logic controller for each disk to be set via
the scsi-id=NNN property, not the lun=NNN property.
Switching the code to use an enum will force authors to pay attention
to this difference when adding future SCSI controllers.
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When introducing the API I've mistakenly used 'int' type for
@nkeys argument which does nothing more than tells the API how
many items there are in @keys array. Obviously, negative values
are not expected and therefore 'unsigned int' should have been
used.
Reported-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The NCR53C90 is the built-in SCSI controller on all sparc machine types,
but not sparc64. Note that it has the fixed alias "scsi", which differs
from our normal naming convention of "scsi0".
The DC390 and AM53C974 are PCI SCSI controllers that can be added to any
PCI machine.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Probing for the NCR53C90 controller is a little unusual. The
qom-list-types QMP command returns a list of all types known to
the QEMU binary. It does not distinguish devices which are user
creatable from those which are built-in.
Any QEMU target that supports PCI will have the DC390 / AM53C974
devices because they are PCI based. Due to code dependencies
in QEMU though, existence of these two devices will also pull in
the NCR53C90 device (called just 'esp' in QEMU). The NCR53C90 is
not user-creatable and can only be used when built-in to the
machine type.
This is only the case on sparc machines, and certain mips64 and
m68k machines. IOW, we don't rely on qom-list-types as a guide
for existence of NCR53C90, as it shouldn't really exist in most
QEMU binaries.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The NCR53C90 is the built-in SCSI controller on all sparc machine types,
and some mips and m68k machine types.
The DC390 and AM53C974 are PCI SCSI controllers that can be added to any
PCI machine.
These are only interesting for emulating obsolete hardware platforms.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The NCR53C90 ESP SCSI controller is only usable when built-in to the
machine type. This method will facilitate checking that restriction
across many places.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The sparc machines have little in common with sparc64 machines.
No sparc machine type includes a PCI bus, so we should not be adding one
to the XML. This further means that we should not be adding a memory
balloon device, nor USB controller as these are both PCI based.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We're no longer generating a UUID during installation, so we
clearly don't need to strip it afterwards; and since the network
driver is perfectly capable of generating a UUID if necessary, we
don't need to do that at %post time either.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Laine Stump <laine@redhat.com>
We are generating a fresh UUID and storing it in the XML for the
default network, but this is unnecessary because the network
driver will automatically generate one if it's missing from the
XML; the fact that we only do this if the uuidgen command happens
to be available on the build machine is further proof that we can
safely skip this step.
This patch is best viewed with 'git show -w'.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
While we generally expect libvirt objects to be defined using the
appropriate APIs, there are cases where it's reasonable for an
external entity, usually a package manager, to drop a valid
configuration file under /etc/libvirt and have libvirt take over
from there: notably, this is exactly how the default network is
handled.
For the most part, whether the configuration is saved back to disk
after being parsed by libvirt doesn't matter, because we'll end up
with the same values anyway, but an obvious exception to this is
data that gets randomly generated when not present, namely MAC
address and UUID.
Historically, both were handled by our build system, but commit
a47ae7c004 moved handling of the former inside libvirt proper;
this commit extends such behavior to the latter as well.
Proper error handling for the virNetworkSaveConfig() call, which
was missing until now, is introduced in the process.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
This has the added benefit of 'gotnet' only being freed after
it was possibly used in the output string.
../src/internal.h:519:27: error: ‘%s’ directive argument is null [-Werror=format-overflow=]
519 | # define fprintf(fh, ...) g_fprintf(fh, __VA_ARGS__)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
../tests/sockettest.c:194:9: note: in expansion of macro ‘fprintf’
194 | fprintf(stderr, "Expected %s, got %s\n", networkstr, gotnet);
| ^~~~~~~
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reported-by: Jaroslav Suchanek <jsuchane@redhat.com>
Fixes: ba08c5932e
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
We jump to the error label if the 'if' condition is true.
Remove the explicit else to make it more obvious that 'hostname'
is filled on both branches of 'if (!uri_in)'.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
In case no uri_in was supplied, we forgot to set the hostname
to the current hostname and formatted a useless uri_out.
src/util/glibcompat.h:57:26: error: ‘%s’ directive argument is null [-Werror=format-overflow=]
57 | # define g_strdup_printf vir_g_strdup_printf
src/openvz/openvz_driver.c:2136:16: note: in expansion of macro ‘g_strdup_printf’
2136 | *uri_out = g_strdup_printf("ssh://%s", hostname);
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reported-by: Jaroslav Suchanek <jsuchane@redhat.com>
Fixes: e3c626a61d
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Introduce new job to make a coverity build and upload coverity data to
scan.coverity.com where the analysis is then executed.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
