At the time of the addition of 'pci-assign' in QEMU commit
v1.3.0-rc0~572^2 the configfd argument was already supported.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Added by commit fc66c1603c and not used since.
Also, the device was present in QEMU 1.5.0 so this capability
will not be needed if we ever decide to implement usb-net support.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The qemuSecurityDomainSetPathLabel() function reports perfect
error itself. Do not overwrite it to something less meaningful.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There is no need to check if @npaths is not zero. Let's
qemuDomainNamespaceUnlinkPaths() handle that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
A virtio device such as
<controller type='scsi' model='virtio-scsi'/>
will be translated to one of four different QEMU devices
based on the address type. This behavior is the same for
all virtio devices, but unfortunately we have separate
ad-hoc code dealing with each and every one of them: not
only this is pointless duplication, but it turns out
that most of that code is not robust against new address
types being introduced and some of it is outright buggy.
Introduce a new function, qemuBuildVirtioDevStr(), which
deals with the issue in a generic fashion, and rewrite
all existing code to use it.
This fixes a bunch of issues such as virtio-serial-pci
being used with virtio-mmio addresses and virtio-gpu
not being usable at all with virtio-mmio addresses.
It also introduces a couple of minor regressions,
namely no longer erroring out when attempting to
use virtio-balloon and virtio-input devices with
virtio-s390 addresses; that said, virtio-s390 has
been superseded by virtio-ccw such a long time ago
that recent QEMU releases have dropped support for
the former entirely, so re-implementing such
device-specific validation is not worth it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The appropriate time to ensure the required capabilities are
present is validate rather than command line generation: add
a new qemuDomainDeviceDefValidateInput() function and move
all existing checks there.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
So far we've only formatted it for virtio-blk-pci and
virtio-blk-ccw, but other virtio-blk devices also support
the corresponding option; moreover, we've always formatted
it for all virtio-scsi devices.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are several functions where we pointlessly duplicate
parts of the format string and pass the same arguments:
refactor them so that the common parts are formatted separately
from the variable parts.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1622455
If a domain is configured to use <source type='file'/> under
<memoryBacking/> we have to honour that setting and produce
-mem-path on the command line. We are not doing so if domain has
no guest NUMA nodes nor hugepages.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The function to retrieve the file system info using QEMU-GA is using
some conditionals to retrieve the info. This is wrong because the error
of some conditionals will be raised if VIR_STRDUP return errors and not
if some problem occurred with JSON.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This commit adds support to use the function qemuAgentGetHostname()
to obtain the domain hostname using QEMU-GA command.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This commit implements the function qemuAgentGetHostname() that uses
the QEMU guest agent command 'guest-get-host-name' to retrieve the
guest hostname of virtual machine running the QEMU-GA.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The struct is called virPCIDeviceAddress and the
functions operating on it should be named accordingly.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Commit f7b5566 added 'save_error' even though the function
already has 'originalError' used in the 'try_remove' section.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The size/capacity stats gathered in qemuDomainBlocksStatsGather when
using -blockdev would be overwritten by assigning/copying the transfered
data statistics at the end. Fix it by moving the assignment prior to
fetching the capacity data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
S390 is aware of both vfio-pci and vfio-ccw devices, so
on S390 the capability QEMU_CAPS_VFIO_PCI_DISPLAY will be
available. Add an extra check to make sure we only set the
display to off for vfio-pci mediated devices. Otherwise we
add display for vfio-ccw device and this breaks vfio-ccw
device qemu command line.
Fixes: d54e45b6e conf: Introduce new <hostdev> attribute 'display'
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Commit 6534b3c4 tried to raise an error when there is no numa
nodes by setting access='shared' in the domain config, but added
a helper called from qemuDomainDeviceDefValidate instead of a
helper called from qemuDomainDefValidate for XML:
<memoryBacking>
<hugepages/>
<access mode='shared'/>
</memoryBacking>
Since there are no memory devices in the test XML, there would
be no validation failure, but the test added was still failing.
Investigating that it turns out that unnecessary XML elements
were causing the failure (no need for <video>, <graphics>,
<pm>, usb controller model "piix3-uhci", disk attribute for
"discard='unmap'", <serial>, <console>, <channel> and a
memballoon model). Removing all those before moving the method
caused the test to succeed.
So this patch moves the validation to the right place and
removes all the unnecessary XML pieces that were causing
a false validation failure.
https://bugzilla.redhat.com/show_bug.cgi?id=1448149#c14
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
We would have used virtio for networking anyway, but it's
better to be explicit; for graphics, none of the existing
models work right now but virtio is the only one which
has a non-PCI variant, so it's as good a default as any
Spotted-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
None of the existing models is suitable for use with
RISC-V virt guests, and we don't want information about
the serial console to be missing from the XML.
The name is based on comments in qemu/hw/riscv/virt.c:
RISC-V machine with 16550a UART and VirtIO MMIO
and in qemu/hw/char/serial.c:
QEMU 16550A UART emulation
along with the output of dmesg in the guest:
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 13,
base_baud= 230400) is a 16550A
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The architecture is new enough that we don't need to
concern ourselves with backwards compatibility in any
capacity.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit 6700062 introduced a jump to error which skipped the
initialization of def:
qemu/qemu_parse_command.c:1870:9: error: variable 'def' is
used uninitialized whenever 'if' condition is true
[-Werror,-Wsometimes-uninitialized]
if (!(qemuCaps = virQEMUCapsCacheLookup(capsCache, progargv[0])))
Initialize def to fix this warning and qemuCaps, to prevent
a future error like this.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Historically the argv -> xml convertor wanted the same default machine
as we'd set when parsing xml. The latter has now changed, however, to
use a default defined by libvirt. The former needs fixing to again
honour the default QEMU machine.
This exposed a bug in handling for the aarch64 target, as QEMU does not
define any default machine. Thus we should not having been accepting
argv without a -machine provided.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virQEMUCapsGetDefaultMachine() method doesn't get QEMU's default
machine any more, instead it gets the historical default that libvirt
prefers for each arch. Rename it, so that the old name can be used for
getting QEMU's default.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We don't honour the QEMU default machine type anymore, always using the
libvirt chosen default instead. The QEMU argv parser, however, will need
to know the exacty QEMU default, so we must record that info.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The affected functions are
virDeviceInfoPCIAddressWanted()
virDeviceInfoPCIAddressPresent()
which get renamed to
virDeviceInfoPCIAddressIsWanted()
virDeviceInfoPCIAddressIsPresent()
to comply with the naming convention used for other
predicates.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This patch ensures that changes in attributes of interfaces will emit
errors except if they are missing from the XML.
Previously we were falsely reporting successful updates, because some
changed attributes got overwritten before the validity checks.
https://bugzilla.redhat.com/show_bug.cgi?id=1599513
Signed-off-by: Katerina Koukiou <kkoukiou@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemuProcessInitCpuAffinity prevents a VM from getting started on a
platform that uses cpu affinity wrapper stubs e.g. macOS.
The patch adds qemuProcessInitCpuAffinity stub on all platforms without
HAVE_SCHED_GETAFFINITY or HAVE_BSD_CPU_AFFINITY.
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The capability was usable since qemu 1.3 so we can remove all the
detection code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Allow mocking of the file descriptor numbers used for the TPM
passthrough mode by extracting the relevant code into an exported
function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
For versions where we can probe that the arguments are optional we can
perform the probing by a schema query rather than sending a separate
command to do so.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Add a new modifier character '*' which will select given schema entry
only when it is optional (denoted by the presence of the 'default' key).
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Split it into a function that returns the whole schema entry so that we
can do additional checks and a helper getting the type string from the
schema entry.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Introduce a few variables so that we can easily access the modifier
character and also don't have to do pointer arithmetic when selecting
the schema entries. This will simplify adding of new modifier
characters.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Extract the code used to probe for the functionality so that it does not
litter the code used for actual work.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Starting from qemu 2.7 the 'device' argument is in fact a name of the
job itself. Change our APIs accordingly and adjust the error message.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The API deals with a block job so use the common error reporting
function for it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Move all relevant APIs dealing with existing jobs together.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The API does not report any special job-related error so the generic
error function should be used.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Now that the job name is used in single place in the respective
functions remove the temporary strings.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Report the generic errors using the existing function so that we don't
reimplement the same functionality multiple times.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Both were removed prior to qemu v1.2.0-rc0 when switching to the new
error format where almost all error types were converted to GenericError.
Relevant qemu commits are <de253f14912e> and <df1e608a01eb0>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
We're going to need to assign virtio-mmio addresses to non-ARM
guests soon, so let's create a generic wrapper that calls to
the architecture-specific implementation.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
With the current implementation, adding a new architecture
and not updating preferredMachines accordingly will not
cause a build failure, making it very likely that subtle
bugs will be introduced in the process. Rework the code
so that such issues will be caught by the compiler.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
We should compare the alias/qdev id only when it was provided by the
caller and when it was found in the reply. Otherwise we could
dereference a NULL pointer. STRNEQ_NULLABLE is not appropriate since
it would return 'true' if the string was not present in the JSON output.
Found by Coverity.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
qemuDomainDiskGetBackendAlias allocates a copy of the nodename string so
we need to free it at the end.
Found by Coverity.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
qemuDomainDetachControllerDevice contained code which implied that alias
might be NULL when detaching the disk and tried to generate it. This is
no longer possible so we can remove the code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
It was found that in cases with host devices virProcessKillPainfully
might be able to send signal zero to the target PID for quite a while
with the process already being gone from /proc/<PID>.
That is due to cleanup and reset of devices which might include a
secondary bus reset that on top of the actions taken has a 1s delay
to let the bus settle. Due to that guests with plenty of Host devices
could easily exceed the default timeouts.
To solve that, this adds an extra delay of 2s per hostdev that is associated
to a VM.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Add code paths which call into the new functions to gather the data on a
per-node-name basis and tweak the aliases used for extracting the data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the 'qdev' instead of the disk alias to lookup the stats and
transfer the capacity from the appropriate node name so that the
function works with -blockdev.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Switch to using the QOM/qdev handles in all calls to
qemuMonitorGetBlockInfo when using -blockdev. The callers also need to
make sure to use the correct handle afterwards to extract the data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
With -blockdev qemu will not report any useful "device" for the data
returned by 'query-block'. We need to start using the 'qdev' field to do
so in cases when "device" is empty or it does not match the entry name.
This patch adds data for the 'qdev' field into the returned data
structure.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Data relevant for the storage of a backing chain member will need to be
reported separately when switching to blockdev. Prepare a function that
extracts the appropriate data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When reporting stats for the backing chain some of them make sense only
for the topmost entry as they are actually tied to the frontend device.
We unfortunately can't change that fact, but we can stop reporting all
zero stats for the backing chain members where they don't make any
sense.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While we report the read and written byte stats for every single layer
of the backing chain, qemu in fact reports them only for the frontend.
Split out the relevant stats into a separate function so that we can
later fix this bug and stop reporting it for backing chain entries where
they don't make sense.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Split out the header so that the loop can be refactored later.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Split out the code which converts the stats gathered in
qemuDomainGetStatsBlock into typed parameters so that it will look
less ugly when extending it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In cases when -blockdev is used we need to use 'query-named-block-nodes'
instead of 'query-block'. This means that we can extract the
write-threshold variable right away.
To keep compatibility with old VMs modify the code which was extracting
the value previously so that it updates the stats structure and a single
code path then can be used to extract the data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Allow reuse of qemuDomainGetStatsOneBlock to work with nodenames by
removing the code that looks up the stats data to the caller.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Disk image size data are not contained in the reply of query-blockstats
but need to be gathered from query-block. For use with -blockdev we
really need to call 'query-named-block-nodes' and process it to retrieve
the correct data.
This patch introduces qemuMonitorBlockStatsUpdateCapacityBlockdev which
updates the capacity data by nodename rather than device name.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For use with -blockdev we need to be able to retrieve the stats by
'qdev' for the frontend device stats since 'device' will be empty. Note
that for non-blockdev case qdev and 'device' with 'drive-' skipped would
be the same.
Additionally so that we can report the highest written offset we need to
also be able to access them by node-name for backing chain purposes.
In cases when 'device' is empty it does not make sense to gather them.
Allow arranging the stats simultaneously in all the above dimensions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rather than totalling every entry from 'query-block' for stats provided
by qemuDomainBlocksStatsGather total only stats for known disks. This
will allow to return data for nodenames and qdevs in the same hash so
that we can use them with -blockdev.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The string is not modified so it does not make sense to have a copy.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the new APIs which allow to manipulate the tray and media separately
and also allow using a nodename to refer to a media to implement media
changing.
With the new approach we don't have to call eject twice as the media is
removed by calling qemuMonitorBlockdevMediumRemove.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
With blockdev we can use the full range of commands to manipulate the
tray and the medium separately. Implement monitor code for this.
Schema testing done in the qemumonitorjsontest allows us to verify that
we generate the commands correctly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Initialize data for the whole backing chain when plugging in or removing
disks when a machine supports -blockdev.
Similarly to startup we need to prepare the structures for the whole
backing chain and take care of the copy-on-read feature.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the 'node-name' provided in the event if 'device' is empty to look
up the disk.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add handling of the 'id' field in the event which corresponds to the
QDEV id of the device.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Allow looking up also via QOM id and rename the function accordingly.
Also add documentation of the specifics.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the nodename to resize the device rather than the drive alias.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
With -blockdev the drive alias can't be used any more so we need to
switch to the QOM name.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The proper way to do this would be to use the 'throttle' driver but
unfortunately it can't change the 'throttle_group' so we can't provide
feature parity. This hack uses the block_set_io_throttle command to do
so until we can properly replace it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a helper which will use a collection of other helpers to determine
whether a disk requires throttling to be enabled.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Format the backing chain onto the commandline using the 'json' syntax
with -blockdev.
The command line formatter needs only minor tweaks to add the new
entries but we now need to initialize the structures that are used for
every layer of the backing chain.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Pass in the node name as the backend alias when -blockdev is used. As
copy-on-read is expressed by a separate -blockdev backing chain member
we need to decide which node name to use here.
For empty cdroms when using -blockdev there is no backend at all so NULL
is returned.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The copy on read functionality is done using a separate layer in the
backing chain. Add function to generate properties for it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Prepare the full backing chain by instantiating authentication and TLS
transport secrets and other necessary objects so that we can add the
full backing chain explicitly to qemu. This also includes allocation of
nodenames for the individual backing chain members.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The copy-on-read feature is expressed by adding a new node layer in
qemu when using -blockdev. Since we will keep these per-disk (as opposed
to per storage source) we need to store the appropriate node names in
the disk definition.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
To allow referring to the drives via the QOM id we need to setup the
floppy drives with a proper ID. This means that -device should be used
for them.
There are the following quirks:
- FDC needs to be instantiated prior to any floppy device
- floppy drive specified via -device does not support 'bootindex'
(hacked around by passing bootindexA=1 to the FDC)
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When we stop using -drive qemu stops reporting it in some of the monitor
commands. To allow referring the disk frontends and the corresponding
block backends we need to know these names. Unfortunately different
buses require different names.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When using -blockdev you need to use the qom path to refer to the disk
fronends. Add means for storing the path and getting it after restart.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the index stored in virStorageSource struct rather than
recalculating it. Currently we'd report proper numbers but that will
change with blockdev.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Node names for block objects in qemu need to be unique for an instance
of the qemu process. Add a counter to generate objects sequentially and
store it in the status XML so that we can restore it.
The helpers added allow to create new node names and reset the counter
after the VM process terminates.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We'll specify them ourselves so it's pointless to attempt to redetect
them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We need to load the backing chain from the XML when using -blockdev.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
SD cards are currently passed by using -drive only which would not be
compatible with using -blockdev fully.
Clear QEMU_CAPS_BLOCKDEV if the VM has such devices.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The capability currently is not enabled so that we can add individual
bits first.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It should be impossible to lack an alias in the domain definition. Other
disk types don't generate it so remove it here as well.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'device' field reported by 'query-block' is empty when -blockdev is
used. Add an argument which will allow matching disk by using the qdev
id so we can use this code with -blockdev.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'device' argument matches only the legacy drive alias. For blockdev
we need to set the throttling for a QOM id and thus we'll need to use
the 'id' field.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The wrapper executes the command and does error detection so there's no
need to open-code all of those things.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
