1
0
mirror of https://passt.top/passt synced 2024-12-22 13:45:32 +00:00
passt/passt.c

371 lines
9.5 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 06:25:09 +00:00
/* PASST - Plug A Simple Socket Transport
passt: Add PASTA mode, major rework PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-07-17 06:34:53 +00:00
* for qemu/UNIX domain socket mode
*
* PASTA - Pack A Subtle Tap Abstraction
* for network namespace/tap device mode
*
* passt.c - Daemon implementation
*
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 06:25:09 +00:00
* Copyright (c) 2020-2021 Red Hat GmbH
* Author: Stefano Brivio <sbrivio@redhat.com>
*
passt: Add PASTA mode, major rework PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-07-17 06:34:53 +00:00
* Grab Ethernet frames from AF_UNIX socket (in "passt" mode) or tap device (in
* "pasta" mode), build SOCK_DGRAM/SOCK_STREAM sockets for each 5-tuple from
* TCP, UDP packets, perform connection tracking and forward them. Forward
* packets received on sockets back to the UNIX domain socket (typically, a
* socket virtio_net file descriptor from qemu) or to the tap device (typically,
* created in a separate network namespace).
*/
#include <sys/epoll.h>
#include <fcntl.h>
#include <sys/mman.h>
#include <sys/resource.h>
Handle userns isolation and dropping root at the same time passt/pasta can interact with user namespaces in a number of ways: 1) With --netns-only we'll remain in our original user namespace 2) With --userns or a PID option to pasta we'll join either the given user namespace or that of the PID 3) When pasta spawns a shell or command we'll start a new user namespace for the command and then join it 4) With passt we'll create a new user namespace when we sandbox() ourself However (3) and (4) turn out to have essentially the same effect. In both cases we create one new user namespace. The spawned command starts there, and passt/pasta itself will live there from sandbox() onwards. Because of this, we can simplify user namespace handling by moving the userns handling earlier, to the same point we drop root in the original namespace. Extend the drop_user() function to isolate_user() which does both. After switching UID and GID in the original userns, isolate_user() will either join or create the userns we require. When we spawn a command with pasta_start_ns()/pasta_setup_ns() we no longer need to create a userns, because we're already made one. sandbox() likewise no longer needs to create (or join) an userns because we're already in the one we need. We no longer need c->pasta_userns_fd, since the fd is only used locally in isolate_user(). Likewise we can replace c->netns_only with a local in conf(), since it's not used outside there. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2022-09-12 12:24:07 +00:00
#include <stdbool.h>
#include <stdlib.h>
#include <unistd.h>
#include <netdb.h>
#include <signal.h>
#include <stdio.h>
#include <string.h>
#include <errno.h>
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 06:25:09 +00:00
#include <time.h>
#include <syslog.h>
#include <sys/prctl.h>
#include <netinet/if_ether.h>
#include <libgen.h>
#ifdef HAS_GETRANDOM
#include <sys/random.h>
#endif
passt: Add PASTA mode, major rework PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-07-17 06:34:53 +00:00
#include "util.h"
#include "passt.h"
#include "dhcp.h"
#include "dhcpv6.h"
#include "isolation.h"
#include "pcap.h"
passt: Add PASTA mode, major rework PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-07-17 06:34:53 +00:00
#include "tap.h"
#include "conf.h"
#include "pasta.h"
#include "arch.h"
#include "log.h"
#include "tcp_splice.h"
#define EPOLL_EVENTS 8
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 06:25:09 +00:00
#define TIMER_INTERVAL__ MIN(TCP_TIMER_INTERVAL, UDP_TIMER_INTERVAL)
#define TIMER_INTERVAL_ MIN(TIMER_INTERVAL__, ICMP_TIMER_INTERVAL)
#define TIMER_INTERVAL MIN(TIMER_INTERVAL_, FLOW_TIMER_INTERVAL)
char pkt_buf[PKT_BUF_BYTES] __attribute__ ((aligned(PAGE_SIZE)));
char *epoll_type_str[] = {
[EPOLL_TYPE_TCP] = "connected TCP socket",
[EPOLL_TYPE_TCP_SPLICE] = "connected spliced TCP socket",
[EPOLL_TYPE_TCP_LISTEN] = "listening TCP socket",
[EPOLL_TYPE_TCP_TIMER] = "TCP timer",
[EPOLL_TYPE_UDP_LISTEN] = "listening UDP socket",
[EPOLL_TYPE_UDP_REPLY] = "UDP reply socket",
[EPOLL_TYPE_PING] = "ICMP/ICMPv6 ping socket",
[EPOLL_TYPE_NSQUIT_INOTIFY] = "namespace inotify watch",
[EPOLL_TYPE_NSQUIT_TIMER] = "namespace timer watch",
[EPOLL_TYPE_TAP_PASTA] = "/dev/net/tun device",
[EPOLL_TYPE_TAP_PASST] = "connected qemu socket",
[EPOLL_TYPE_TAP_LISTEN] = "listening qemu socket",
};
static_assert(ARRAY_SIZE(epoll_type_str) == EPOLL_NUM_TYPES,
"epoll_type_str[] doesn't match enum epoll_type");
/**
* post_handler() - Run periodic and deferred tasks for L4 protocol handlers
* @c: Execution context
udp: Connection tracking for ephemeral, local ports, and related fixes As we support UDP forwarding for packets that are sent to local ports, we actually need some kind of connection tracking for UDP. While at it, this commit introduces a number of vaguely related fixes for issues observed while trying this out. In detail: - implement an explicit, albeit minimalistic, connection tracking for UDP, to allow usage of ephemeral ports by the guest and by the host at the same time, by binding them dynamically as needed, and to allow mapping address changes for packets with a loopback address as destination - set the guest MAC address whenever we receive a packet from tap instead of waiting for an ARP request, and set it to broadcast on start, otherwise DHCPv6 might not work if all DHCPv6 requests time out before the guest starts talking IPv4 - split context IPv6 address into address we assign, global or site address seen on tap, and link-local address seen on tap, and make sure we use the addresses we've seen as destination (link-local choice depends on source address). Similarly, for IPv4, split into address we assign and address we observe, and use the address we observe as destination - introduce a clock_gettime() syscall right after epoll_wait() wakes up, so that we can remove all the other ones and pass the current timestamp to tap and socket handlers -- this is additionally needed by UDP to time out bindings to ephemeral ports and mappings between loopback address and a local address - rename sock_l4_add() to sock_l4(), no semantic changes intended - include <arpa/inet.h> in passt.c before kernel headers so that we can use <netinet/in.h> macros to check IPv6 address types, and remove a duplicate <linux/ip.h> inclusion Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-04-29 14:59:20 +00:00
* @now: Current timestamp
*/
static void post_handler(struct ctx *c, const struct timespec *now)
{
#define CALL_PROTO_HANDLER(lc, uc) \
do { \
extern void \
lc ## _defer_handler (struct ctx *c) \
__attribute__ ((weak)); \
\
if (!c->no_ ## lc) { \
if (lc ## _defer_handler) \
lc ## _defer_handler(c); \
\
if (timespec_diff_ms((now), &c->lc.timer_run) \
>= uc ## _TIMER_INTERVAL) { \
lc ## _timer(c, now); \
c->lc.timer_run = *now; \
} \
} \
} while (0)
/* NOLINTNEXTLINE(bugprone-branch-clone): intervals can be the same */
CALL_PROTO_HANDLER(tcp, TCP);
/* NOLINTNEXTLINE(bugprone-branch-clone): intervals can be the same */
CALL_PROTO_HANDLER(udp, UDP);
flow_defer_handler(c, now);
#undef CALL_PROTO_HANDLER
}
/**
* secret_init() - Create secret value for SipHash calculations
* @c: Execution context
*/
static void secret_init(struct ctx *c)
{
#ifndef HAS_GETRANDOM
int dev_random = open("/dev/random", O_RDONLY);
unsigned int random_read = 0;
while (dev_random && random_read < sizeof(c->hash_secret)) {
int ret = read(dev_random,
(uint8_t *)&c->hash_secret + random_read,
sizeof(c->hash_secret) - random_read);
if (ret == -1 && errno == EINTR)
continue;
if (ret <= 0)
break;
random_read += ret;
}
if (dev_random >= 0)
close(dev_random);
if (random_read < sizeof(c->hash_secret))
#else
if (getrandom(&c->hash_secret, sizeof(c->hash_secret),
GRND_RANDOM) < 0)
#endif /* !HAS_GETRANDOM */
die_perror("Failed to get random bytes for hash table and TCP");
}
/**
* timer_init() - Set initial timestamp for timer runs to current time
* @c: Execution context
* @now: Current timestamp
*/
static void timer_init(struct ctx *c, const struct timespec *now)
{
c->tcp.timer_run = c->udp.timer_run = c->icmp.timer_run = *now;
}
/**
* proto_update_l2_buf() - Update scatter-gather L2 buffers in protocol handlers
* @eth_d: Ethernet destination address, NULL if unchanged
* @eth_s: Ethernet source address, NULL if unchanged
*/
void proto_update_l2_buf(const unsigned char *eth_d, const unsigned char *eth_s)
{
tcp_update_l2_buf(eth_d, eth_s);
udp_update_l2_buf(eth_d, eth_s);
}
passt, pasta: Namespace-based sandboxing, defer seccomp policy application To reach (at least) a conceptually equivalent security level as implemented by --enable-sandbox in slirp4netns, we need to create a new mount namespace and pivot_root() into a new (empty) mountpoint, so that passt and pasta can't access any filesystem resource after initialisation. While at it, also detach IPC, PID (only for passt, to prevent vulnerabilities based on the knowledge of a target PID), and UTS namespaces. With this approach, if we apply the seccomp filters right after the configuration step, the number of allowed syscalls grows further. To prevent this, defer the application of seccomp policies after the initialisation phase, before the main loop, that's where we expect bad things to happen, potentially. This way, we get back to 22 allowed syscalls for passt and 34 for pasta, on x86_64. While at it, move #syscalls notes to specific code paths wherever it conceptually makes sense. We have to open all the file handles we'll ever need before sandboxing: - the packet capture file can only be opened once, drop instance numbers from the default path and use the (pre-sandbox) PID instead - /proc/net/tcp{,v6} and /proc/net/udp{,v6}, for automatic detection of bound ports in pasta mode, are now opened only once, before sandboxing, and their handles are stored in the execution context - the UNIX domain socket for passt is also bound only once, before sandboxing: to reject clients after the first one, instead of closing the listening socket, keep it open, accept and immediately discard new connection if we already have a valid one Clarify the (unchanged) behaviour for --netns-only in the man page. To actually make passt and pasta processes run in a separate PID namespace, we need to unshare(CLONE_NEWPID) before forking to background (if configured to do so). Introduce a small daemon() implementation, __daemon(), that additionally saves the PID file before forking. While running in foreground, the process itself can't move to a new PID namespace (a process can't change the notion of its own PID): mention that in the man page. For some reason, fork() in a detached PID namespace causes SIGTERM and SIGQUIT to be ignored, even if the handler is still reported as SIG_DFL: add a signal handler that just exits. We can now drop most of the pasta_child_handler() implementation, that took care of terminating all processes running in the same namespace, if pasta started a shell: the shell itself is now the init process in that namespace, and all children will terminate once the init process exits. Issuing 'echo $$' in a detached PID namespace won't return the actual namespace PID as seen from the init namespace: adapt demo and test setup scripts to reflect that. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-02-07 20:11:37 +00:00
/**
* exit_handler() - Signal handler for SIGQUIT and SIGTERM
* @unused: Unused, handler deals with SIGQUIT and SIGTERM only
*
* TODO: After unsharing the PID namespace and forking, SIG_DFL for SIGTERM and
* SIGQUIT unexpectedly doesn't cause the process to terminate, figure out why.
*
* #syscalls exit_group
passt, pasta: Namespace-based sandboxing, defer seccomp policy application To reach (at least) a conceptually equivalent security level as implemented by --enable-sandbox in slirp4netns, we need to create a new mount namespace and pivot_root() into a new (empty) mountpoint, so that passt and pasta can't access any filesystem resource after initialisation. While at it, also detach IPC, PID (only for passt, to prevent vulnerabilities based on the knowledge of a target PID), and UTS namespaces. With this approach, if we apply the seccomp filters right after the configuration step, the number of allowed syscalls grows further. To prevent this, defer the application of seccomp policies after the initialisation phase, before the main loop, that's where we expect bad things to happen, potentially. This way, we get back to 22 allowed syscalls for passt and 34 for pasta, on x86_64. While at it, move #syscalls notes to specific code paths wherever it conceptually makes sense. We have to open all the file handles we'll ever need before sandboxing: - the packet capture file can only be opened once, drop instance numbers from the default path and use the (pre-sandbox) PID instead - /proc/net/tcp{,v6} and /proc/net/udp{,v6}, for automatic detection of bound ports in pasta mode, are now opened only once, before sandboxing, and their handles are stored in the execution context - the UNIX domain socket for passt is also bound only once, before sandboxing: to reject clients after the first one, instead of closing the listening socket, keep it open, accept and immediately discard new connection if we already have a valid one Clarify the (unchanged) behaviour for --netns-only in the man page. To actually make passt and pasta processes run in a separate PID namespace, we need to unshare(CLONE_NEWPID) before forking to background (if configured to do so). Introduce a small daemon() implementation, __daemon(), that additionally saves the PID file before forking. While running in foreground, the process itself can't move to a new PID namespace (a process can't change the notion of its own PID): mention that in the man page. For some reason, fork() in a detached PID namespace causes SIGTERM and SIGQUIT to be ignored, even if the handler is still reported as SIG_DFL: add a signal handler that just exits. We can now drop most of the pasta_child_handler() implementation, that took care of terminating all processes running in the same namespace, if pasta started a shell: the shell itself is now the init process in that namespace, and all children will terminate once the init process exits. Issuing 'echo $$' in a detached PID namespace won't return the actual namespace PID as seen from the init namespace: adapt demo and test setup scripts to reflect that. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-02-07 20:11:37 +00:00
*/
void exit_handler(int signal)
{
(void)signal;
exit(EXIT_SUCCESS);
}
/**
* main() - Entry point and main loop
* @argc: Argument count
* @argv: Options, plus optional target PID for pasta mode
*
* Return: non-zero on failure
*
passt, pasta: Namespace-based sandboxing, defer seccomp policy application To reach (at least) a conceptually equivalent security level as implemented by --enable-sandbox in slirp4netns, we need to create a new mount namespace and pivot_root() into a new (empty) mountpoint, so that passt and pasta can't access any filesystem resource after initialisation. While at it, also detach IPC, PID (only for passt, to prevent vulnerabilities based on the knowledge of a target PID), and UTS namespaces. With this approach, if we apply the seccomp filters right after the configuration step, the number of allowed syscalls grows further. To prevent this, defer the application of seccomp policies after the initialisation phase, before the main loop, that's where we expect bad things to happen, potentially. This way, we get back to 22 allowed syscalls for passt and 34 for pasta, on x86_64. While at it, move #syscalls notes to specific code paths wherever it conceptually makes sense. We have to open all the file handles we'll ever need before sandboxing: - the packet capture file can only be opened once, drop instance numbers from the default path and use the (pre-sandbox) PID instead - /proc/net/tcp{,v6} and /proc/net/udp{,v6}, for automatic detection of bound ports in pasta mode, are now opened only once, before sandboxing, and their handles are stored in the execution context - the UNIX domain socket for passt is also bound only once, before sandboxing: to reject clients after the first one, instead of closing the listening socket, keep it open, accept and immediately discard new connection if we already have a valid one Clarify the (unchanged) behaviour for --netns-only in the man page. To actually make passt and pasta processes run in a separate PID namespace, we need to unshare(CLONE_NEWPID) before forking to background (if configured to do so). Introduce a small daemon() implementation, __daemon(), that additionally saves the PID file before forking. While running in foreground, the process itself can't move to a new PID namespace (a process can't change the notion of its own PID): mention that in the man page. For some reason, fork() in a detached PID namespace causes SIGTERM and SIGQUIT to be ignored, even if the handler is still reported as SIG_DFL: add a signal handler that just exits. We can now drop most of the pasta_child_handler() implementation, that took care of terminating all processes running in the same namespace, if pasta started a shell: the shell itself is now the init process in that namespace, and all children will terminate once the init process exits. Issuing 'echo $$' in a detached PID namespace won't return the actual namespace PID as seen from the init namespace: adapt demo and test setup scripts to reflect that. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-02-07 20:11:37 +00:00
* #syscalls read write writev
* #syscalls socket bind connect getsockopt setsockopt s390x:socketcall close
* #syscalls recvfrom sendto shutdown
* #syscalls arm:recv ppc64le:recv arm:send ppc64le:send
* #syscalls accept4|accept listen epoll_ctl epoll_wait|epoll_pwait epoll_pwait
* #syscalls clock_gettime arm:clock_gettime64
*/
int main(int argc, char **argv)
{
struct epoll_event events[EPOLL_EVENTS];
int nfds, i, devnull_fd = -1;
char argv0[PATH_MAX], *name;
struct ctx c = { 0 };
struct rlimit limit;
udp: Connection tracking for ephemeral, local ports, and related fixes As we support UDP forwarding for packets that are sent to local ports, we actually need some kind of connection tracking for UDP. While at it, this commit introduces a number of vaguely related fixes for issues observed while trying this out. In detail: - implement an explicit, albeit minimalistic, connection tracking for UDP, to allow usage of ephemeral ports by the guest and by the host at the same time, by binding them dynamically as needed, and to allow mapping address changes for packets with a loopback address as destination - set the guest MAC address whenever we receive a packet from tap instead of waiting for an ARP request, and set it to broadcast on start, otherwise DHCPv6 might not work if all DHCPv6 requests time out before the guest starts talking IPv4 - split context IPv6 address into address we assign, global or site address seen on tap, and link-local address seen on tap, and make sure we use the addresses we've seen as destination (link-local choice depends on source address). Similarly, for IPv4, split into address we assign and address we observe, and use the address we observe as destination - introduce a clock_gettime() syscall right after epoll_wait() wakes up, so that we can remove all the other ones and pass the current timestamp to tap and socket handlers -- this is additionally needed by UDP to time out bindings to ephemeral ports and mappings between loopback address and a local address - rename sock_l4_add() to sock_l4(), no semantic changes intended - include <arpa/inet.h> in passt.c before kernel headers so that we can use <netinet/in.h> macros to check IPv6 address types, and remove a duplicate <linux/ip.h> inclusion Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-04-29 14:59:20 +00:00
struct timespec now;
passt, pasta: Namespace-based sandboxing, defer seccomp policy application To reach (at least) a conceptually equivalent security level as implemented by --enable-sandbox in slirp4netns, we need to create a new mount namespace and pivot_root() into a new (empty) mountpoint, so that passt and pasta can't access any filesystem resource after initialisation. While at it, also detach IPC, PID (only for passt, to prevent vulnerabilities based on the knowledge of a target PID), and UTS namespaces. With this approach, if we apply the seccomp filters right after the configuration step, the number of allowed syscalls grows further. To prevent this, defer the application of seccomp policies after the initialisation phase, before the main loop, that's where we expect bad things to happen, potentially. This way, we get back to 22 allowed syscalls for passt and 34 for pasta, on x86_64. While at it, move #syscalls notes to specific code paths wherever it conceptually makes sense. We have to open all the file handles we'll ever need before sandboxing: - the packet capture file can only be opened once, drop instance numbers from the default path and use the (pre-sandbox) PID instead - /proc/net/tcp{,v6} and /proc/net/udp{,v6}, for automatic detection of bound ports in pasta mode, are now opened only once, before sandboxing, and their handles are stored in the execution context - the UNIX domain socket for passt is also bound only once, before sandboxing: to reject clients after the first one, instead of closing the listening socket, keep it open, accept and immediately discard new connection if we already have a valid one Clarify the (unchanged) behaviour for --netns-only in the man page. To actually make passt and pasta processes run in a separate PID namespace, we need to unshare(CLONE_NEWPID) before forking to background (if configured to do so). Introduce a small daemon() implementation, __daemon(), that additionally saves the PID file before forking. While running in foreground, the process itself can't move to a new PID namespace (a process can't change the notion of its own PID): mention that in the man page. For some reason, fork() in a detached PID namespace causes SIGTERM and SIGQUIT to be ignored, even if the handler is still reported as SIG_DFL: add a signal handler that just exits. We can now drop most of the pasta_child_handler() implementation, that took care of terminating all processes running in the same namespace, if pasta started a shell: the shell itself is now the init process in that namespace, and all children will terminate once the init process exits. Issuing 'echo $$' in a detached PID namespace won't return the actual namespace PID as seen from the init namespace: adapt demo and test setup scripts to reflect that. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-02-07 20:11:37 +00:00
struct sigaction sa;
passt: Add PASTA mode, major rework PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-07-17 06:34:53 +00:00
clock_gettime(CLOCK_MONOTONIC, &log_start);
arch_avx2_exec(argv);
isolate_initial();
c.pasta_netns_fd = c.fd_tap = c.pidfile_fd = -1;
passt, pasta: Namespace-based sandboxing, defer seccomp policy application To reach (at least) a conceptually equivalent security level as implemented by --enable-sandbox in slirp4netns, we need to create a new mount namespace and pivot_root() into a new (empty) mountpoint, so that passt and pasta can't access any filesystem resource after initialisation. While at it, also detach IPC, PID (only for passt, to prevent vulnerabilities based on the knowledge of a target PID), and UTS namespaces. With this approach, if we apply the seccomp filters right after the configuration step, the number of allowed syscalls grows further. To prevent this, defer the application of seccomp policies after the initialisation phase, before the main loop, that's where we expect bad things to happen, potentially. This way, we get back to 22 allowed syscalls for passt and 34 for pasta, on x86_64. While at it, move #syscalls notes to specific code paths wherever it conceptually makes sense. We have to open all the file handles we'll ever need before sandboxing: - the packet capture file can only be opened once, drop instance numbers from the default path and use the (pre-sandbox) PID instead - /proc/net/tcp{,v6} and /proc/net/udp{,v6}, for automatic detection of bound ports in pasta mode, are now opened only once, before sandboxing, and their handles are stored in the execution context - the UNIX domain socket for passt is also bound only once, before sandboxing: to reject clients after the first one, instead of closing the listening socket, keep it open, accept and immediately discard new connection if we already have a valid one Clarify the (unchanged) behaviour for --netns-only in the man page. To actually make passt and pasta processes run in a separate PID namespace, we need to unshare(CLONE_NEWPID) before forking to background (if configured to do so). Introduce a small daemon() implementation, __daemon(), that additionally saves the PID file before forking. While running in foreground, the process itself can't move to a new PID namespace (a process can't change the notion of its own PID): mention that in the man page. For some reason, fork() in a detached PID namespace causes SIGTERM and SIGQUIT to be ignored, even if the handler is still reported as SIG_DFL: add a signal handler that just exits. We can now drop most of the pasta_child_handler() implementation, that took care of terminating all processes running in the same namespace, if pasta started a shell: the shell itself is now the init process in that namespace, and all children will terminate once the init process exits. Issuing 'echo $$' in a detached PID namespace won't return the actual namespace PID as seen from the init namespace: adapt demo and test setup scripts to reflect that. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-02-07 20:11:37 +00:00
sigemptyset(&sa.sa_mask);
sa.sa_flags = 0;
sa.sa_handler = exit_handler;
sigaction(SIGTERM, &sa, NULL);
sigaction(SIGQUIT, &sa, NULL);
if (argc < 1)
exit(EXIT_FAILURE);
strncpy(argv0, argv[0], PATH_MAX - 1);
name = basename(argv0);
if (strstr(name, "pasta")) {
sa.sa_handler = pasta_child_handler;
if (sigaction(SIGCHLD, &sa, NULL))
die_perror("Couldn't install signal handlers");
if (signal(SIGPIPE, SIG_IGN) == SIG_ERR)
die_perror("Couldn't set disposition for SIGPIPE");
passt: Add PASTA mode, major rework PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-07-17 06:34:53 +00:00
c.mode = MODE_PASTA;
} else if (strstr(name, "passt")) {
passt: Add PASTA mode, major rework PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-07-17 06:34:53 +00:00
c.mode = MODE_PASST;
} else {
exit(EXIT_FAILURE);
passt: Add PASTA mode, major rework PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-07-17 06:34:53 +00:00
}
madvise(pkt_buf, TAP_BUF_BYTES, MADV_HUGEPAGE);
c.epollfd = epoll_create1(EPOLL_CLOEXEC);
if (c.epollfd == -1)
die_perror("Failed to create epoll file descriptor");
if (getrlimit(RLIMIT_NOFILE, &limit))
die_perror("Failed to get maximum value of open files limit");
c.nofile = limit.rlim_cur = limit.rlim_max;
if (setrlimit(RLIMIT_NOFILE, &limit))
die_perror("Failed to set current limit for open files");
sock_probe_mem(&c);
conf(&c, argc, argv);
trace_init(c.trace);
pasta_netns_quit_init(&c);
tap_sock_init(&c);
secret_init(&c);
clock_gettime(CLOCK_MONOTONIC, &now);
flow_init();
if ((!c.no_udp && udp_init(&c)) || (!c.no_tcp && tcp_init(&c)))
exit(EXIT_FAILURE);
proto_update_l2_buf(c.mac_guest, c.mac);
if (c.ifi4 && !c.no_dhcp)
dhcp_init();
if (c.ifi6 && !c.no_dhcpv6)
dhcpv6_init(&c);
passt, pasta: Namespace-based sandboxing, defer seccomp policy application To reach (at least) a conceptually equivalent security level as implemented by --enable-sandbox in slirp4netns, we need to create a new mount namespace and pivot_root() into a new (empty) mountpoint, so that passt and pasta can't access any filesystem resource after initialisation. While at it, also detach IPC, PID (only for passt, to prevent vulnerabilities based on the knowledge of a target PID), and UTS namespaces. With this approach, if we apply the seccomp filters right after the configuration step, the number of allowed syscalls grows further. To prevent this, defer the application of seccomp policies after the initialisation phase, before the main loop, that's where we expect bad things to happen, potentially. This way, we get back to 22 allowed syscalls for passt and 34 for pasta, on x86_64. While at it, move #syscalls notes to specific code paths wherever it conceptually makes sense. We have to open all the file handles we'll ever need before sandboxing: - the packet capture file can only be opened once, drop instance numbers from the default path and use the (pre-sandbox) PID instead - /proc/net/tcp{,v6} and /proc/net/udp{,v6}, for automatic detection of bound ports in pasta mode, are now opened only once, before sandboxing, and their handles are stored in the execution context - the UNIX domain socket for passt is also bound only once, before sandboxing: to reject clients after the first one, instead of closing the listening socket, keep it open, accept and immediately discard new connection if we already have a valid one Clarify the (unchanged) behaviour for --netns-only in the man page. To actually make passt and pasta processes run in a separate PID namespace, we need to unshare(CLONE_NEWPID) before forking to background (if configured to do so). Introduce a small daemon() implementation, __daemon(), that additionally saves the PID file before forking. While running in foreground, the process itself can't move to a new PID namespace (a process can't change the notion of its own PID): mention that in the man page. For some reason, fork() in a detached PID namespace causes SIGTERM and SIGQUIT to be ignored, even if the handler is still reported as SIG_DFL: add a signal handler that just exits. We can now drop most of the pasta_child_handler() implementation, that took care of terminating all processes running in the same namespace, if pasta started a shell: the shell itself is now the init process in that namespace, and all children will terminate once the init process exits. Issuing 'echo $$' in a detached PID namespace won't return the actual namespace PID as seen from the init namespace: adapt demo and test setup scripts to reflect that. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-02-07 20:11:37 +00:00
pcap_init(&c);
if (!c.foreground) {
if ((devnull_fd = open("/dev/null", O_RDWR | O_CLOEXEC)) < 0)
die_perror("Failed to open /dev/null");
}
passt, pasta: Namespace-based sandboxing, defer seccomp policy application To reach (at least) a conceptually equivalent security level as implemented by --enable-sandbox in slirp4netns, we need to create a new mount namespace and pivot_root() into a new (empty) mountpoint, so that passt and pasta can't access any filesystem resource after initialisation. While at it, also detach IPC, PID (only for passt, to prevent vulnerabilities based on the knowledge of a target PID), and UTS namespaces. With this approach, if we apply the seccomp filters right after the configuration step, the number of allowed syscalls grows further. To prevent this, defer the application of seccomp policies after the initialisation phase, before the main loop, that's where we expect bad things to happen, potentially. This way, we get back to 22 allowed syscalls for passt and 34 for pasta, on x86_64. While at it, move #syscalls notes to specific code paths wherever it conceptually makes sense. We have to open all the file handles we'll ever need before sandboxing: - the packet capture file can only be opened once, drop instance numbers from the default path and use the (pre-sandbox) PID instead - /proc/net/tcp{,v6} and /proc/net/udp{,v6}, for automatic detection of bound ports in pasta mode, are now opened only once, before sandboxing, and their handles are stored in the execution context - the UNIX domain socket for passt is also bound only once, before sandboxing: to reject clients after the first one, instead of closing the listening socket, keep it open, accept and immediately discard new connection if we already have a valid one Clarify the (unchanged) behaviour for --netns-only in the man page. To actually make passt and pasta processes run in a separate PID namespace, we need to unshare(CLONE_NEWPID) before forking to background (if configured to do so). Introduce a small daemon() implementation, __daemon(), that additionally saves the PID file before forking. While running in foreground, the process itself can't move to a new PID namespace (a process can't change the notion of its own PID): mention that in the man page. For some reason, fork() in a detached PID namespace causes SIGTERM and SIGQUIT to be ignored, even if the handler is still reported as SIG_DFL: add a signal handler that just exits. We can now drop most of the pasta_child_handler() implementation, that took care of terminating all processes running in the same namespace, if pasta started a shell: the shell itself is now the init process in that namespace, and all children will terminate once the init process exits. Issuing 'echo $$' in a detached PID namespace won't return the actual namespace PID as seen from the init namespace: adapt demo and test setup scripts to reflect that. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-02-07 20:11:37 +00:00
if (isolate_prefork(&c))
die("Failed to sandbox process, exiting");
passt, pasta: Namespace-based sandboxing, defer seccomp policy application To reach (at least) a conceptually equivalent security level as implemented by --enable-sandbox in slirp4netns, we need to create a new mount namespace and pivot_root() into a new (empty) mountpoint, so that passt and pasta can't access any filesystem resource after initialisation. While at it, also detach IPC, PID (only for passt, to prevent vulnerabilities based on the knowledge of a target PID), and UTS namespaces. With this approach, if we apply the seccomp filters right after the configuration step, the number of allowed syscalls grows further. To prevent this, defer the application of seccomp policies after the initialisation phase, before the main loop, that's where we expect bad things to happen, potentially. This way, we get back to 22 allowed syscalls for passt and 34 for pasta, on x86_64. While at it, move #syscalls notes to specific code paths wherever it conceptually makes sense. We have to open all the file handles we'll ever need before sandboxing: - the packet capture file can only be opened once, drop instance numbers from the default path and use the (pre-sandbox) PID instead - /proc/net/tcp{,v6} and /proc/net/udp{,v6}, for automatic detection of bound ports in pasta mode, are now opened only once, before sandboxing, and their handles are stored in the execution context - the UNIX domain socket for passt is also bound only once, before sandboxing: to reject clients after the first one, instead of closing the listening socket, keep it open, accept and immediately discard new connection if we already have a valid one Clarify the (unchanged) behaviour for --netns-only in the man page. To actually make passt and pasta processes run in a separate PID namespace, we need to unshare(CLONE_NEWPID) before forking to background (if configured to do so). Introduce a small daemon() implementation, __daemon(), that additionally saves the PID file before forking. While running in foreground, the process itself can't move to a new PID namespace (a process can't change the notion of its own PID): mention that in the man page. For some reason, fork() in a detached PID namespace causes SIGTERM and SIGQUIT to be ignored, even if the handler is still reported as SIG_DFL: add a signal handler that just exits. We can now drop most of the pasta_child_handler() implementation, that took care of terminating all processes running in the same namespace, if pasta started a shell: the shell itself is now the init process in that namespace, and all children will terminate once the init process exits. Issuing 'echo $$' in a detached PID namespace won't return the actual namespace PID as seen from the init namespace: adapt demo and test setup scripts to reflect that. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-02-07 20:11:37 +00:00
if (!c.foreground)
__daemon(c.pidfile_fd, devnull_fd);
passt, pasta: Namespace-based sandboxing, defer seccomp policy application To reach (at least) a conceptually equivalent security level as implemented by --enable-sandbox in slirp4netns, we need to create a new mount namespace and pivot_root() into a new (empty) mountpoint, so that passt and pasta can't access any filesystem resource after initialisation. While at it, also detach IPC, PID (only for passt, to prevent vulnerabilities based on the knowledge of a target PID), and UTS namespaces. With this approach, if we apply the seccomp filters right after the configuration step, the number of allowed syscalls grows further. To prevent this, defer the application of seccomp policies after the initialisation phase, before the main loop, that's where we expect bad things to happen, potentially. This way, we get back to 22 allowed syscalls for passt and 34 for pasta, on x86_64. While at it, move #syscalls notes to specific code paths wherever it conceptually makes sense. We have to open all the file handles we'll ever need before sandboxing: - the packet capture file can only be opened once, drop instance numbers from the default path and use the (pre-sandbox) PID instead - /proc/net/tcp{,v6} and /proc/net/udp{,v6}, for automatic detection of bound ports in pasta mode, are now opened only once, before sandboxing, and their handles are stored in the execution context - the UNIX domain socket for passt is also bound only once, before sandboxing: to reject clients after the first one, instead of closing the listening socket, keep it open, accept and immediately discard new connection if we already have a valid one Clarify the (unchanged) behaviour for --netns-only in the man page. To actually make passt and pasta processes run in a separate PID namespace, we need to unshare(CLONE_NEWPID) before forking to background (if configured to do so). Introduce a small daemon() implementation, __daemon(), that additionally saves the PID file before forking. While running in foreground, the process itself can't move to a new PID namespace (a process can't change the notion of its own PID): mention that in the man page. For some reason, fork() in a detached PID namespace causes SIGTERM and SIGQUIT to be ignored, even if the handler is still reported as SIG_DFL: add a signal handler that just exits. We can now drop most of the pasta_child_handler() implementation, that took care of terminating all processes running in the same namespace, if pasta started a shell: the shell itself is now the init process in that namespace, and all children will terminate once the init process exits. Issuing 'echo $$' in a detached PID namespace won't return the actual namespace PID as seen from the init namespace: adapt demo and test setup scripts to reflect that. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-02-07 20:11:37 +00:00
else
pidfile_write(c.pidfile_fd, getpid());
passt, pasta: Namespace-based sandboxing, defer seccomp policy application To reach (at least) a conceptually equivalent security level as implemented by --enable-sandbox in slirp4netns, we need to create a new mount namespace and pivot_root() into a new (empty) mountpoint, so that passt and pasta can't access any filesystem resource after initialisation. While at it, also detach IPC, PID (only for passt, to prevent vulnerabilities based on the knowledge of a target PID), and UTS namespaces. With this approach, if we apply the seccomp filters right after the configuration step, the number of allowed syscalls grows further. To prevent this, defer the application of seccomp policies after the initialisation phase, before the main loop, that's where we expect bad things to happen, potentially. This way, we get back to 22 allowed syscalls for passt and 34 for pasta, on x86_64. While at it, move #syscalls notes to specific code paths wherever it conceptually makes sense. We have to open all the file handles we'll ever need before sandboxing: - the packet capture file can only be opened once, drop instance numbers from the default path and use the (pre-sandbox) PID instead - /proc/net/tcp{,v6} and /proc/net/udp{,v6}, for automatic detection of bound ports in pasta mode, are now opened only once, before sandboxing, and their handles are stored in the execution context - the UNIX domain socket for passt is also bound only once, before sandboxing: to reject clients after the first one, instead of closing the listening socket, keep it open, accept and immediately discard new connection if we already have a valid one Clarify the (unchanged) behaviour for --netns-only in the man page. To actually make passt and pasta processes run in a separate PID namespace, we need to unshare(CLONE_NEWPID) before forking to background (if configured to do so). Introduce a small daemon() implementation, __daemon(), that additionally saves the PID file before forking. While running in foreground, the process itself can't move to a new PID namespace (a process can't change the notion of its own PID): mention that in the man page. For some reason, fork() in a detached PID namespace causes SIGTERM and SIGQUIT to be ignored, even if the handler is still reported as SIG_DFL: add a signal handler that just exits. We can now drop most of the pasta_child_handler() implementation, that took care of terminating all processes running in the same namespace, if pasta started a shell: the shell itself is now the init process in that namespace, and all children will terminate once the init process exits. Issuing 'echo $$' in a detached PID namespace won't return the actual namespace PID as seen from the init namespace: adapt demo and test setup scripts to reflect that. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-02-07 20:11:37 +00:00
log_runtime = true;
if (pasta_child_pid)
kill(pasta_child_pid, SIGUSR1);
isolate_postfork(&c);
timer_init(&c, &now);
loop:
/* NOLINTNEXTLINE(bugprone-branch-clone): intervals can be the same */
/* cppcheck-suppress [duplicateValueTernary, unmatchedSuppression] */
passt: Assorted fixes from "fresh eyes" review A bunch of fixes not worth single commits at this stage, notably: - make buffer, length parameter ordering consistent in ARP, DHCP, NDP handlers - strict checking of buffer, message and option length in DHCP handler (a malicious client could have easily crashed it) - set up forwarding for IPv4 and IPv6, and masquerading with nft for IPv4, from demo script - get rid of separate slow and fast timers, we don't save any overhead that way - stricter checking of buffer lengths as passed to tap handlers - proper dequeuing from qemu socket back-end: I accidentally trashed messages that were bundled up together in a single tap read operation -- the length header tells us what's the size of the next frame, but there's no apparent limit to the number of messages we get with one single receive - rework some bits of the TCP state machine, now passive and active connection closes appear to be robust -- introduce a new FIN_WAIT_1_SOCK_FIN state indicating a FIN_WAIT_1 with a FIN flag from socket - streamline TCP option parsing routine - track TCP state changes to stderr (this is temporary, proper debugging and syslogging support pending) - observe that multiplying a number by four might very well change its value, and this happens to be the case for the data offset from the TCP header as we check if it's the same as the total length to find out if it's a duplicated ACK segment - recent estimates suggest that the duration of a millisecond is closer to a million nanoseconds than a thousand of them, this trend is now reflected into the timespec_diff_ms() convenience routine Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-21 10:33:38 +00:00
nfds = epoll_wait(c.epollfd, events, EPOLL_EVENTS, TIMER_INTERVAL);
if (nfds == -1 && errno != EINTR)
die_perror("epoll_wait() failed in main loop");
udp: Connection tracking for ephemeral, local ports, and related fixes As we support UDP forwarding for packets that are sent to local ports, we actually need some kind of connection tracking for UDP. While at it, this commit introduces a number of vaguely related fixes for issues observed while trying this out. In detail: - implement an explicit, albeit minimalistic, connection tracking for UDP, to allow usage of ephemeral ports by the guest and by the host at the same time, by binding them dynamically as needed, and to allow mapping address changes for packets with a loopback address as destination - set the guest MAC address whenever we receive a packet from tap instead of waiting for an ARP request, and set it to broadcast on start, otherwise DHCPv6 might not work if all DHCPv6 requests time out before the guest starts talking IPv4 - split context IPv6 address into address we assign, global or site address seen on tap, and link-local address seen on tap, and make sure we use the addresses we've seen as destination (link-local choice depends on source address). Similarly, for IPv4, split into address we assign and address we observe, and use the address we observe as destination - introduce a clock_gettime() syscall right after epoll_wait() wakes up, so that we can remove all the other ones and pass the current timestamp to tap and socket handlers -- this is additionally needed by UDP to time out bindings to ephemeral ports and mappings between loopback address and a local address - rename sock_l4_add() to sock_l4(), no semantic changes intended - include <arpa/inet.h> in passt.c before kernel headers so that we can use <netinet/in.h> macros to check IPv6 address types, and remove a duplicate <linux/ip.h> inclusion Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-04-29 14:59:20 +00:00
clock_gettime(CLOCK_MONOTONIC, &now);
for (i = 0; i < nfds; i++) {
passt: Add PASTA mode, major rework PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-07-17 06:34:53 +00:00
union epoll_ref ref = *((union epoll_ref *)&events[i].data.u64);
uint32_t eventmask = events[i].events;
passt: Add PASTA mode, major rework PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-07-17 06:34:53 +00:00
trace("%s: epoll event on %s %i (events: 0x%08x)",
c.mode == MODE_PASTA ? "pasta" : "passt",
EPOLL_TYPE_STR(ref.type), ref.fd, eventmask);
switch (ref.type) {
case EPOLL_TYPE_TAP_PASTA:
tap_handler_pasta(&c, eventmask, &now);
break;
case EPOLL_TYPE_TAP_PASST:
tap_handler_passt(&c, eventmask, &now);
break;
case EPOLL_TYPE_TAP_LISTEN:
tap_listen_handler(&c, eventmask);
break;
case EPOLL_TYPE_NSQUIT_INOTIFY:
pasta_netns_quit_inotify_handler(&c, ref.fd);
break;
case EPOLL_TYPE_NSQUIT_TIMER:
pasta_netns_quit_timer_handler(&c, ref);
break;
case EPOLL_TYPE_TCP:
tcp_sock_handler(&c, ref, eventmask);
break;
case EPOLL_TYPE_TCP_SPLICE:
tcp_splice_sock_handler(&c, ref, eventmask);
break;
case EPOLL_TYPE_TCP_LISTEN:
tcp_listen_handler(&c, ref, &now);
break;
case EPOLL_TYPE_TCP_TIMER:
tcp_timer_handler(&c, ref);
break;
case EPOLL_TYPE_UDP_LISTEN:
udp_listen_sock_handler(&c, ref, eventmask, &now);
break;
case EPOLL_TYPE_UDP_REPLY:
udp_reply_sock_handler(&c, ref, eventmask, &now);
break;
case EPOLL_TYPE_PING:
icmp_sock_handler(&c, ref);
break;
default:
/* Can't happen */
ASSERT(0);
}
}
post_handler(&c, &now);
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 06:25:09 +00:00
goto loop;
}