Cloud Hypovrisor supports legacy serial device and virito console device
for VMs. Using legacy serial device, CH can capture full VM console logs,
but its implementation is based on KVM PIO emulation and has poor
performance. Using the virtio console device, the VM console logs will
be sent to CH through the virtio ring, the performance is better, but CH
will only capture the VM console logs after the virtio console device is
initialized, the VM early startup logs will be discarded.
This patch provides a way to enable both the legacy serial device and the
virtio console device as a TTY mode by setting the leagcy serial port as
the VM's early printk device and setting the virtio console as the VM's
main console device.
Then CH can capture early boot logs from the legacy serial device and
capture later logs from the virito console device with better performance.
Signed-off-by: Yong He <alexyonghe@tencent.com>
The seccompiler v0.4.0 started to use `seccomp` syscall instead of the
`prctl` syscall. Also, threads for virtio-deivces should not need any of
these syscalls anyway.
Signed-off-by: Bo Chen <chen.bo@intel.com>
This patch fixes following warnings:
error: boolean to int conversion using if
--> vmm/src/vm.rs:866:42
|
| .create_vm_with_type(if sev_snp_enabled.into() {
| __________________________________________^
| | 1 // SEV_SNP_ENABLED
| | } else {
| | 0 // SEV_SNP_DISABLED
| | })
| |_____________________^ help: replace with from: `u64::from(sev_snp_enabled.into())`
|
= note: `-D clippy::bool-to-int-with-if` implied by `-D warnings`
= note: `sev_snp_enabled.into() as u64` or `sev_snp_enabled.into().into()` can also be valid options
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#bool_to_int_with_if
error: useless conversion to the same type: `bool`
--> vmm/src/vm.rs:866:45
|
| .create_vm_with_type(if sev_snp_enabled.into() {
| ^^^^^^^^^^^^^^^^^^^^^^ help: consider removing `.into()`: `sev_snp_enabled`
|
= note: `-D clippy::useless-conversion` implied by `-D warnings`
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#useless_conversion
error: could not compile `vmm` due to 2 previous errors
Signed-off-by: Muminul Islam <muislam@microsoft.com>
Partially revert 111225a2a5
and add the new dbus and pvpanic arguments.
As we are switching back to clap observe the following changes.
A few examples:
1. `-v -v -v` needs to be written as`-vvv`
2. `--disk D1 --disk D2` and others need to be written as `--disk D1 D2`.
3. `--option value` needs to be written as `--option=value.`
Change integration tests to adapt to the breaking changes.
Signed-off-by: Wei Liu <liuwe@microsoft.com>
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@intel.com>
This struct contains all configuration fields that controls the way how
we generate CPUID for the guest on x86_64. This allows cleaner extension
when adding new configuration fields.
Signed-off-by: Bo Chen <chen.bo@intel.com>
The lock to `vm_config` is held for accessing `cpus.kvm_hyperv` passing
as a reference to `arch::generate_common_cpuid()`, so acquiring the same
lock again while calling to the same function is a deadlock.
Fixes: 3793ffe888
Reported-by: Yi Wang <foxywang@tencent.com>
Signed-off-by: Bo Chen <chen.bo@intel.com>
As part of this initialization for a SEV-SNP VM on MSHV, it is required
that we transition the guest state to secure state using partition
hypercall. This implies all the created VPs will transition to secure
state and could access the guest encrypted memory.
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
Cloud-Hypervisor takes a path for Unix socket, where it will listen
on. Users can connect to the other end of the socket and access serial
port on the guest.
"--serial socket=/path/to/socket" is the cmdline option to pass to
cloud-hypervisor.
Users can use socat like below to access guest's serial port once the
guest starts to boot:
socat -,crnl UNIX-CONNECT:/path/to/socket
Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com>
The 'derive' feature of `zerocopy` crate now is optional and requires to
be enabled explicitly [1]. Also, a version bump on `acpi_tables` is
needed to reply on a single version of `zerocopy` to avoid compilation
errors.
[1] https://github.com/google/zerocopy/pull/176
Signed-off-by: Bo Chen <chen.bo@intel.com>
Include the TSC frequency as part of the KVM state so that it will be
restored at the destination.
This ensures migration works correctly between hosts that have a
different TSC frequency if the guest is running with TSC as the source
of timekeeping.
Fixes: #5786
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
EntryPoint had an optional entry_addr, but there is no usage of this
struct that makes it necessary that the address is optional.
Remove the Option to avoid being able to express things that are not
useful.
Signed-off-by: Julian Stecklina <julian.stecklina@cyberus-technology.de>
This fixes all typos found by the typos utility with respect to the config file.
Signed-off-by: Philipp Schuster <philipp.schuster@cyberus-technology.de>
Update to the latest vm-memory and all the crates that also depend upon
it.
Fix some deprecation warnings.
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
This feature flag gates the development for SEV-SNP enabled guest.
Also add a helper function to identify if SNP should be enabled for the
guest.
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
This commit builds on top of the `Monitor::subscribe` function and
makes it possible to broadcast events published from `event-monitor`
over D-Bus.
The broadcasting functionality is enabled if the D-Bus API is enabled
and users who wish to also enable the file based `event-monitor` can do
so with the CLI arg `--event-monitor`.
Signed-off-by: Omer Faruk Bayram <omer.faruk@sartura.hr>
warning: this argument is a mutable reference, but not used mutably
--> vmm/src/sigwinch_listener.rs:121:38
|
121 | fn set_foreground_process_group(tty: &mut File) -> io::Result<()> {
| ^^^^^^^^^ help: consider changing to: `&File`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_pass_by_ref_mut
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
warning: this argument is a mutable reference, but not used mutably
--> vmm/src/device_manager.rs:1908:35
|
1908 | fn set_raw_mode(&mut self, f: &mut dyn AsRawFd) -> vmm_sys_util::errno::Result<()> {
| ^^^^^^^^^^^^^^^^ help: consider changing to: `&dyn AsRawFd`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_pass_by_ref_mut
= note: `#[warn(clippy::needless_pass_by_ref_mut)]` on by default
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
Add pending removed vcpu check according to VcpuState.removing, which
can avoid cloud hypervisor hangup during continual vcpu resize.
Fix#5419
Signed-off-by: Yi Wang <foxywang@tencent.com>
This patch modifies `event_monitor` to ensure that concurrent access to
`event_log` from multiple threads is safe. Previously, the `event_log`
function would acquire a reference to the event log file and write
to it without doing any synchronization, which made it prone to
data races. This issue likely went under the radar because the
relevant `SAFETY` comment on the unsafe block was incomplete.
The new implementation spawns a dedicated thread named `event-monitor`
solely for writing to the file. It uses the MPMC channel exposed by
`flume` to pass messages to the `event-monitor` thread. Since
`flume::Sender<T>` implements `Sync`, it is safe for multiple threads
to share it and send messages to the `event-monitor` thread.
This is not possible with `std::sync::mpsc::Sender<T>` since it's
`!Sync`, meaning it is not safe for it to be shared between different
threads.
The `event_monitor::set_monitor` function now only initializes
the required global state and returns an instance of the
`Monitor` struct. This decouples the actual logging logic from the
`event_monitor` crate. The `event-monitor` thread is then spawned by
the `vmm` crate.
Signed-off-by: Omer Faruk Bayram <omer.faruk@sartura.hr>
With the addition of the spinning waiting for the exit event to be
received in the CMOS device a regression was introduced into the CMOS
fuzzer. Since there is nothing to receive the event in the fuzzer and
there is nothing to update the bit the that the device is looping on;
introducing an infinite loop.
Use an Option<> type so that when running the device in the fuzzer no
Arc<AtomicBool> is provided effectively disabling the spinning logic.
Fixes: https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=61165
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
The reset system is asynchronous with an I/O event (PIO or MMIO) for
ACPI/i8042/CMOS triggering a write to the reset_evt event handler. The
VMM thread will pick up this event on the VMM main loop and then trigger
a shutdown in the CpuManager. However since there is some delay between
the CPU threads being marked to be killed (through the
CpuManager::cpus_kill_signalled bool) it is possible for the guest vCPU
that triggered the exit to be re-entered when the vCPU KVM_RUN is called
after the I/O exit is completed.
This is undesirable and in particular the Linux kernel will attempt to
jump to real mode after a CMOS based exit - this is unsupported in
nested KVM on AMD on Azure and will trigger an error in KVM_RUN.
Solve this problem by spinning in the device that has triggered the
reset until the vcpus_kill_signalled boolean has been updated
indicating that the VMM thread has received the event and called
CpuManager::shutdown(). In particular if this bool is set then the vCPU
threads will not re-enter the guest.
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
Split interrupt source group restore into two steps, first restore
the irqfd for each interrupt source entry, and second restore the
GSI routing of the entire interrupt source group.
This patch will reduce restore latency of interrupt source group,
and in a 200-concurrent restore test, the patch reduced the
average IOAPIC restore time from 15ms to 1ms.
Signed-off-by: Yong He <alexyonghe@tencent.com>
If the VMM is not already paused then pause the VM prior to executing
the coredump and then resume it after. If the VM is already paused then
the original state is maintained.
Signed-off-by: Yi Wang <foxywang@tencent.com>
Add MSHV_CREATE_DEVICE, MSHV_SET_DEVICE_ATTR ioctls to filters. These
ioctls are required to passthrough PCI devices on mshv.
Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com>
The pause of vcpu is async now, which makes the vm pause is not
synchronised. As virtio device calls paused_sync wait() to make
sure device_manager pause synchronously, if we make vcpu pause
synchronously, the vm pause can be synchronously then. After
vm.pause() returns the vm is really paused now.
This patch adds a AtomicBool variable to mark vcpu paused state,
to make sure the pause of CpuManager is synchronised.
Signed-off-by: Yi Wang <foxywang@tencent.com>
This commit merges crates `qcow`, `vhdx` and `block_util` into the
crate `block`, which can allow `qcow` to use functions from `block_util`
without introducing a circular crate dependency.
This commit is based on crosvm implementation:
f2eecc4152
Signed-off-by: Yu Li <liyu.yukiteru@bytedance.com>
Using this over the LocalApic supports APIC IDs (and hence number of
vCPUs) above 256 (size increases from u8 to u32.)
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
If the VM has been configured but not yet booted, all we need to do to
support removing a device is to remove it from the config, so it will
never be created.
Signed-off-by: Alyssa Ross <hi@alyssa.is>
This fixes the valid VM config unit tests, which would otherwise fail
to deserialize their expected JSON config due to the missing "gdb" field.
Signed-off-by: Alyssa Ross <hi@alyssa.is>
warning: usage of `Arc<T>` where `T` is not `Send` or `Sync`
--> virtio-devices/src/vsock/device.rs:376:22
|
376 | backend: Arc::new(RwLock::new(backend)),
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
= help: consider using `Rc<T>` instead or wrapping `T` in a std::sync type like `Mutex<T>`
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#arc_with_non_send_sync
= note: `#[warn(clippy::arc_with_non_send_sync)]` on by default
The vsock backend may be shared between threads, so the type `B` in
`Vsock` should be `VsockBackend` and `Sync`.
Considering that `api_receiver` and `gdb_receiver` are only used in vmm
threads, the `Arc` can be replaced by `Rc`.
Signed-off-by: Yu Li <liyu.yukiteru@bytedance.com>
warning: useless use of `vec!`
--> test_infra/src/lib.rs:111:30
|
111 | let mut events = vec![epoll::Event::new(epoll::Events::empty(), 0); 1];
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: you can use an array directly: `[epoll::Event::new(epoll::Events::empty(), 0); 1]`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#useless_vec
= note: `#[warn(clippy::useless_vec)]` on by default
Signed-off-by: Yu Li <liyu.yukiteru@bytedance.com>
This gives users the chance to reduce the number of dependencies
included, which is generally good practice and also reduces code size.
Furthermore, `io_uring` specifically is a strong contender for something
one may wish to disable due to the syscall API's many security issues[1]
[1]: https://security.googleblog.com/2023/06/learnings-from-kctf-vrps-42-linux.html
Signed-off-by: Manish Goregaokar <manishsmail@gmail.com>
This does the same thing as df2a7c17 ("vmm: Ignore and warn TAP FDs
sent via the HTTP request body"), but for the vm.create endpoint,
which also previously would accept file descriptors in the body, and
try to use whatever fd occupied that number as a TAP device.
Signed-off-by: Alyssa Ross <hi@alyssa.is>
Port of df2a7c17 ("vmm: Ignore and warn TAP FDs sent via the HTTP
request body"), but for the vm.create endpoint, which would previously
accept file descriptors in the body, and try to use whatever fd
occupied that number as a TAP device.
Since I had to move the wrapping of the net config in an Arc until
after it was modified, I made the same change to all other endpoints,
so the style stays consistent.
Signed-off-by: Alyssa Ross <hi@alyssa.is>
This commit renames `ram_region_sub_size` to `ram_region_available_size`
and make its value align down to the default page size or hugepage
size of the current memory zone, which can prevent the memory zone from
being split into misaligned parts. And if the available size of ram
region is zero, this region will be marked as consumed even it has
unused space.
Note that there is two methods to use hugepages.
1. Specify `hugepages` for `memory` or `memory-zone`, if the
`hugepage_size` is not specified, the value can be got by `statfs`
for `/dev/hugepages`.
2. Specify a `file` in hugetlbfs for `memory-zone`, the hugepage size
can also be got by `statfs` for the file.
The value for alignment will be the hugepage size if this memory zone
is using hugepages, otherwise the value will be default page size of
system.
Fixes: #5463
Signed-off-by: Yu Li <liyu.yukiteru@bytedance.com>
The previous `arch_memory_regions` function will provide some memory
regions with the specified memory size and fill all the previous
regions before using the next one, but sometimes there may be no need
to fill up the previous one, e.g., the previous one should be aligned
with hugepage size.
This commit make `arch_memory_regions` function not take any
parameters and return the max available regions, the memory manager
can use them on demand.
Fixes: #5463
Signed-off-by: Yu Li <liyu.yukiteru@bytedance.com>
SerialBuffer uses VecDeque::extend, which calls realloc, which a
maximum buffer size of 1 MiB. Starting at allocation sizes of
128 KiB, musl's mallocng allocator will use mremap for the allocation.
Since this was not permitted by the seccomp rules, heavy write load
could crash cloud-hypervisor with a seccomp failure. (Encountered
using virtio-console, but I don't see any reason it wouldn't happen
for the legacy serial device too.)
Signed-off-by: Alyssa Ross <hi@alyssa.is>
Bump to the latest rust-vmm crates, including vm-memory, vfio,
vfio-bindings, vfio-user, virtio-bindings, virtio-queue, linux-loader,
vhost, and vhost-user-backend,
Signed-off-by: Bo Chen <chen.bo@intel.com>
Introduces three new CLI options, `dbus-service-name`,
`dbus-object-path` and `dbus-system-bus` to configure the DBus API.
Signed-off-by: Omer Faruk Bayram <omer.faruk@sartura.hr>
This commit applies the previously created seccomp filter
to the `DbusApi` thread.
Also encloses the main loop of the `DBusApi` thread using
`std::panic::catch_unwind` and `AssertUnwindSafe` in order to mirror
the behavior of the HTTP API.
Signed-off-by: Omer Faruk Bayram <omer.faruk@sartura.hr>
This commit adds support for graceful shutdown of the DBusApi thread
using `futures::channel::oneshot` channels. By using oneshot channels,
we ensure that the thread has enough time to send a response to the
`VmmShutdown` method call before it is terminated. Without this step,
the thread may be terminated before it can send a response, resulting
in an error message on the client side stating that the message
recipient disconnected from the message bus without providing a reply.
Also changes the default values for DBus service name, object path
and interface name.
Signed-off-by: Omer Faruk Bayram <omer.faruk@sartura.hr>
This commit introduces three new dependencies: `zbus`, `futures`
and `blocking`. `blocking` is used to call the Internal API in zbus'
async context which is driven by `futures::executor`. They are all
behind the `dbus_api` feature flag.
The D-Bus API implementation is behind the same `dbus_api` feature
flag as well.
Signed-off-by: Omer Faruk Bayram <omer.faruk@sartura.hr>
The refactoring on deferring address space allocation (#5169) broke TDX,
as TDX initialization needs to access guest memory for encryption and
measurement of guest pages.
Signed-off-by: Bo Chen <chen.bo@intel.com>
The current implementation of breadth first traversal for device tree
uses a temporary vector, therefore causes unnecessary memory copy.
Remove it and do it within vector nodes.
Signed-off-by: Hao Xu <howeyxu@tencent.com>
Unlike KVM, there's no internal handling for topoolgy under MSHV. Thus,
if no topology has been passed during the CH launch, use the boot CPUs
count to construct the topology struct.
Signed-off-by: Anatol Belski <anbelski@linux.microsoft.com>
Originally the AML only accepted one hex number for PCI segment
numbering. Change it to accept two numbers. That makes it possible to
add up to 256 PCI segments.
Signed-off-by: Wei Liu <liuwe@microsoft.com>
When I refactored this to centralise resetting the tty into
DeviceManager::drop, I tested that the tty was reset if an error
happened on the vmm thread, but not on the main thread. It turns out
that if an error happened on the main thread, the process would just
exit, so drop handlers on other threads wouldn't get run.
To fix this, I've changed start_vmm() to write to the VMM's exit
eventfd and then join the thread if an error happens after the vmm
thread is started.
Fixes: b6feae0a ("vmm: only touch the tty flags if it's being used")
Signed-off-by: Alyssa Ross <hi@alyssa.is>
Previously, we used two different functions for configuring ttys.
vmm_sys_util::terminal::Terminal::set_raw_mode() was used to configure
stdio ttys, and cfmakeraw() was used to configure ptys created by
cloud-hypervisor. When I centralized the stdio tty cleanup, I also
switched to using cfmakeraw() everywhere, to avoid duplication.
cfmakeraw sets the OPOST flag, but when we later reset the ttys, we
used vmm_sys_util::terminal::Terminal::set_canon_mode(), which does
not unset this flag. This meant that the terminal was getting mostly,
but not fully, reset.
To fix this without depending on the implementation of cfmakeraw(),
let's just store the original termios for stdio terminals, and restore
them to exactly the state we found them in when cloud-hypervisor exits.
Fixes: b6feae0a ("vmm: only touch the tty flags if it's being used")
Signed-off-by: Alyssa Ross <hi@alyssa.is>
In particular the Std::write() API requires that the value implements
AsBytes and copies the slice representation into the table data. This
avoids unaligned writes which can cause a panic with the updated
toolchain.
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
For structures that are used in SDT ACPI tables it is necessary for them
to implement this trait for the newly safe Std::write() API.
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
This is used on older kernels where close_range() is not available.
Signed-off-by: Alyssa Ross <hi@alyssa.is>
Fixes: 505f4dfa ("vmm: close all unused fds in sigwinch listener")
On KVM this is provided by an ioctl, on MSHV this is constant. Although
there is a HV_MAXIMUM_PROCESSORS constant the MSHV ioctl API is limited
to u8.
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
The custom 'clone' duplicates 'preserved_fds' so that the validation
logic can be safely carried out on the clone of the VmConfig.
The custom 'drop' ensures 'preserved_fds' are safely closed when the
holding VmConfig instance is destroyed.
Signed-off-by: Bo Chen <chen.bo@intel.com>
Preserved FDs are the ones that share the same life-time as its holding
VmConfig instance, such as FDs for creating TAP devices.
Preserved FDs will stay open as long as the holding VmConfig instance is
valid, and will be closed when the holding VmConfig instance is destroyed.
Signed-off-by: Bo Chen <chen.bo@intel.com>
When neither serial nor console are connected to the tty,
cloud-hypervisor shouldn't touch the tty at all. One way in which
this is annoying is that if I am running cloud-hypervisor without it
using my terminal, I expect to be able to suspend it with ^Z like any
other process, but that doesn't work if it's put the terminal into raw
mode.
Instead of putting the tty into raw mode when a VM is created or
restored, do it when a serial or console device is created. Since we
now know it can't be put into raw mode until the Vm object is created,
we can move setting it back to canon mode into the drop handler for
that object, which should always be run in normal operation. We still
also put the tty into canon mode in the SIGTERM / SIGINT handler, but
check whether the tty was actually used, rather than whether stdin is
a tty. This requires passing on_tty around as an atomic boolean.
I explored more of an abstraction over the tty — having an object that
encapsulated stdout and put the tty into raw mode when initialized and
into canon mode when dropped — but it wasn't practical, mostly due to
the special requirements of the signal handler. I also investigated
whether the SIGWINCH listener process could be used here, which I
think would have worked but I'm hesitant to involve it in serial
handling as well as conosle handling.
There's no longer a check for whether the file descriptor is a tty
before setting it into canon mode — it's redundant, because if it's
not a tty it just won't respond to the ioctl.
Tested by shutting down through the API, SIGTERM, and an error
injected after setting raw mode.
Signed-off-by: Alyssa Ross <hi@alyssa.is>
If the VM is shut down, either it's going to be started again, in
which case we still want to be in raw mode, or the process is about to
exit, in which case canon mode will be set at the end of main.
Signed-off-by: Alyssa Ross <hi@alyssa.is>
Having PMU in guests isn't critical, and not all hardware supports
it (e.g. Apple Silicon).
CpuManager::init_pmu already has a fallback for if PMU is not
supported by the VCPU, but we weren't getting that far, because we
would always try to initialise the VCPU with KVM_ARM_VCPU_PMU_V3, and
then bail when it returned with EINVAL.
Signed-off-by: Alyssa Ross <hi@alyssa.is>
Previously, we were only using it for PTYs, because for PTYs there's
no alternative. But since we have to have it for PTYs anyway, if we
also use it for TTYs, we can eliminate all of the code that handled
SIGWINCH for TTYs.
Signed-off-by: Alyssa Ross <hi@alyssa.is>
Now that the SIGWINCH listener has fallbacks for older kernels, we
don't expect it to routinely fail, so if there's an error setting it
up, we want to know about it.
Signed-off-by: Alyssa Ross <hi@alyssa.is>
This will allow the SIGWINCH listener to run on kernels older than
5.5, although on those kernels it will have to make 64 syscalls to
reset all the signal handlers.
Signed-off-by: Alyssa Ross <hi@alyssa.is>
The PTY main file descriptor had to be introduced as a parameter to
start_sigwinch_listener, so that it could be closed in the child.
Really the SIGWINCH listener process should not have any file
descriptors open, except for the ones it needs to function, so let's
make it more robust by having it close all other file descriptors.
For recent kernels, we can do this very conveniently with
close_range(2), but for older kernels, we have to fall back to closing
open file descriptors one at a time.
Signed-off-by: Alyssa Ross <hi@alyssa.is>
Significant API changes have occured, most significantly is the switch
to an approach which does not require vm-memory and can run no_std.
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
Now cloud hypervisor will start signal thread to catch
SIGWINCH signal, cloud hypervisor then will resize the
guest console via vconsole.
This patch skip starting signal thread when there is no
need to resize guest console, such as console is not
configured.
Signed-off-by: Yong He <alexyonghe@tencent.com>
The PR #2333 added I/O rate limiter on block device, with some options
in `DiskConfig`. And the PR #2401 added rate limiter on virtio-net
device with same options, but it still throws `Error::ParseDisk`.
This commit fixes it with correct values.
Fixes: #2401
Signed-off-by: Yu Li <liyu.yukiteru@bytedance.com>
Once error occur, vcpu thread may exit, this should
be critical event for the whole VM, we should fire
exit event and set vcpu state.
If we don't set vcpu state, the shutdown process
will hang at signal_thread, which is waiting the
vcpu state to change.
Signed-off-by: Yong He <alexyonghe@tencent.com>
We need to provide valid FDs while creating 'NetConfig' instances even
for unit tests. Closing invalid FDs would cause random unit test
failures.
Also, two identical 'NetConfig' instances are not allowed any more,
because it would lead to close the same FD twice. This is consistent
with the fact that a clone of a "NetConfig" instance is no
longer *equal* to the instance itself.
Fixes: #5203
Signed-off-by: Bo Chen <chen.bo@intel.com>
These are owned by the config (and are duplicated before being used to
create the `Tap` for the virtio-net device.)
By implementing Drop on NetConfig we have issues with moving out of
members that don't implement the Copy trait. This requires a small
adjustment to the unit tests that use the Default::default() function.
Fixes: #5197
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The custom version duplicates any FDs that have been provided so that
the validation logic used on hotplug, which takes a clone of the config,
can be safely carried out.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This code is indentical to what is in this repository. When a release
gets made we can then switch to that.
Fixes: #5122
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
If swtpm becomes unresponsive, guest gets blocked at "recvmsg" on tpm's
data FD. This change adds a timeout to the data fd socket. If swtpm
becomes unresponsive guest waits for "timeout" (secs) and continues to
run after returning an I/O error to tpm commands.
Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com>
We can ideally defer the address space allocation till we start the
vCPUs for the very first time. Because the VM will not access the memory
until the CPUs start running. Thus there is no need to allocate the
address space eagerly and wait till the time we are going to start the
vCPUs for the first time.
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
This hypervisor leaf includes details of the TSC frequency if that is
available from KVM. This can be used to efficiently calculate time
passed when there is an invariant TSC.
TEST=Run `cpuid` in the guest and observe the frequency populated.
Fixes: #5178
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Change "thead" to "thread".
Also make sure the two messages are distinguishable by adding "vmm" and
"vm" prefix.
Signed-off-by: Wei Liu <liuwe@microsoft.com>
In order to comply with latest TDX version, we rely onto the branch
kvm-upstream-2022.08.07-v5.19-rc8 from https://github.com/intel/tdx
repository. Updates are based on changes that happened in
arch/x86/include/uapi/asm/kvm.h headers file.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
A few breaking changes:
1. `-vvv` needs to be written as `-v -v -v`.
2. `--disk D1 D2` and others need to be written as `--disk D1 --disk D2`.
3. `--option=value` needs to be written as `--option value`
Change integration tests to adapt to the breaking changes.
Signed-off-by: Wei Liu <liuwe@microsoft.com>
Add new configuration for offloading features, including
Checksum/TSO/UFO, and set these offloading features as
enabled by default.
Fixes: #4792.
Signed-off-by: Yong He <alexyonghe@tencent.com>
MSHV does not require to ensure MMIO/PIO exits complete
before pausing. This patch makes sure the above requirement
by checking the hypervisor type run-time.
Fixes#5037
Signed-off-by: Muminul Islam <muislam@microsoft.com>
This functionality has been obsoleted by our native support for
hugepages and shared memory.
See: #5082
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
To align the logging messages with the rest of the code, this
message should be aligned with another similar occurrence in
epoll_helper.rs
Signed-off-by: Philipp Schuster <philipp.schuster@cyberus-technology.de>
The double underscore made it different from how other projects would
name this particular macro.
No functional change.
Signed-off-by: Wei Liu <liuwe@microsoft.com>
Remove from the documentation and API definition but continue support
using the field (with a deprecation warning.)
See: #4837
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This simplifies the Snapshot creation as we expect a SnapshotData to be
provided most of the time.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The information about the identifier related to a Snapshot is only
relevant from the BTreeMap perspective, which is why we can get rid of
the duplicated identifier in every Snapshot structure.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
There's no reason to carry a HashMap of SnapshotDataSection per
Snapshot. And given we now provide at most one SnapshotDataSection per
Snapshot, there's no need to keep the id part of the SnapshotDataSection
structure.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Without breaking the former way of declaring them. This is simply based
on the presence of the GUID TDX Metadata offset. If not present, we
consider the firmware is quite old and therefore we fallback onto the
previous way to expose memory resources.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In particular update to latest linux-loader release and point to latest
vfio repository for both crates hosted there.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The datatype used for the ioctl() C library call is different between it
and the glibc toolchains. The easiest solution is to have the compiler
type cast to type of the parameter.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The coredump functionality is only implemented for x86_64 so it should
only be compiled in there.
Fixes: #4964
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
TDX was broken by the recent refactoring moving the vCPU creation
earlier than before. The simple and correct way to fix this problem is
by moving the TDX initialization right before the vCPUs creation. The
rest of the TDX setup can remain where it is.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This removes the storage of the GuestMemoryMmap on the CpuManager
further allowing the decoupling of the CpuManager from the
MemoryManager.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
When configuring the vCPUs it is only necessary to provide the guest
memory when booting fresh (for populating the guest memory). As such
refactor the vCPU configuration to remove the use of the
GuestMemoryMmap stored on the CpuManager.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Thanks to the new way of restoring Vm, we can now create the Vm object
directly with the appropriate VmState rather than having to patch it at
a later time.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
No need to provide a boolean to know if the VM is being restored given
we already have this information from the Option<Snapshot>.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Now the entire codebase has been moved to the new restore design, we can
complete the work by creating a dedicated restore() function for the Vm
object and get rid of the method restore() from the Snapshottable trait.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The snapshot and restore of AArch64 Gic was done in Vm. Now it is moved
to DeviceManager.
The benefit is that the restore can be done while the Gic is created in
DeviceManager.
While the moving of state data from Vm snapshot to DeviceManager
snapshot breaks the compatability of migration from older versions.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
Given the recent factorization that happened in vm.rs, we're now able to
merge Vm::new_from_snapshot with Vm::new.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This moves the devices creation out of the dedicated restore function
which will be eventually removed.
This factorizes the creation of all devices into a single location.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This allows the clock restoration to be moved out of the dedicated
restore function, which will eventually be removed.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Based on all the work that has already been merged, it is now possible
to fully move DeviceManager out of the previous restore model, meaning
there's no need for a dedicated restore() function to be implemented
there.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Every Vcpu is now created with the right state if there's an available
snapshot associated with it. This simplifies the restore logic.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Following the new restore design, it is not appropriate to set every
virtio device threads into a paused state after they've been started.
This is why we remove the line of code pausing the devices only after
they've been restored, and replace it with a small patch in every virtio
device implementation. When a virtio device is created as part of a
restored VM, the associated "paused" boolean is set to true. This
ensures the corresponding thread will be directly parked when being
started, avoiding the thread to be in a different state than the one it
was on the source VM during the snapshot.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Moving the Ioapic object to the new restore design, meaning the Ioapic
is created directly with the right state, and it shares the same
codepath as when it's created from scratch.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Creating a dedicated Result type for VirtioPciDevice, associated with
the new VirtioPciDeviceError enum. This allows for a clearer handling of
the errors generated through VirtioPciDevice::new().
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The code for restoring a VirtioPciDevice has been updated, including the
dependencies VirtioPciCommonConfig, MsixConfig and PciConfiguration.
It's important to note that both PciConfiguration and MsixConfig still
have restore() implementations because Vfio and VfioUser devices still
rely on the old way for restore.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In the new process, `device::Gic::new()` covers additional actions:
1. Creating `hypervisor::vGic`
2. Initializing interrupt routings
The change makes the vGic device ready in the beginning of
`DeviceManager::create_devices()`. This can unblock the GIC related
devices initialization in the `DeviceManager`.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
Moving the creation of the vCPUs before the DeviceManager gets created
will allow for the aarch64 vGIC to be created before the DeviceManager
as well in a follow up patch. The end goal being to adopt the same
creation sequence for both x86_64 and aarch64, and keeping in mind that
the vGIC requires every vCPU to be created.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Split the vCPU creation into two distincts parts. On the one hand we
create the actual Vcpu object with the creation of the hypervisor::Vcpu.
And on the other hand, we configure the existing Vcpu, setting registers
to proper values (such as setting the entry point).
This will allow for further work to move the creation earlier in the
boot, so that the hypervisor::Vcpu will be already created when the
DeviceManager gets created.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
The CpuManager is now created before the DeviceManager. This is required
as preliminary work for creating the vCPUs before the DeviceManager,
which is required to ensure both x86_64 and aarch64 follow the same
sequence.
It's important to note the optimization for faster PIO accesses on the
PCI config space had to be removed given the VmOps was required by the
CpuManager and by the Vcpu by extension. But given the PciConfigIo is
created as part of the DeviceManager, there was no proper way of moving
things around so that we could provide PciConfigIo early enough.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This optimisation provided some peformance improvement when measured by
perf however when considered in terms of boot time peformance this
optimisation doesn't have any impact measurable using our
peformance-metrics tooling.
Removing this optimisation helps simplify the VMM internals as it allows
the reordering of the VM creation process permitting refactoring of the
restore code path.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Add an TPM2 entry to DSDT ACPI table. Add a TPM2 table to guest's ACPI.
Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com>
Co-authored-by: Sean Yoo <t-seanyoo@microsoft.com>
If the memory is not backed by a file then it is possible to enable
Transparent Huge Pages on the memory and take advantage of the benefits
of huge pages without requiring the specific allocation of an appropriate
number of huge pages.
TEST=Boot and see that in /proc/`pidof cloud-hypervisor`/smaps that the
region is now THPeligible (and that also pages are being used.)
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
As huge pages are always MAP_SHARED then where the shared memory would
be checked (for vhost-user and local migration) we can also check
instead for huge pages.
The checking is also extended to cover the memory zones based
configuration as well.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
We can't use MAP_ANONYMOUS and still have huge pages so MAP_SHARED is
effectively required when using huge pages.
Unfortunately it is not as simple as always forcing MAP_SHARED if
hugepages is on as this might be inappropriate in the backing file case
hence why there is additional complexity of assigning to mmap_flags on
each case and the MAP_SHARED is only turned on for the anonymous file
huge page case as well as anonymous shared file case.
See: #4805
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
If we do not need an anonymous file backing the memory then do not
create one.
As a side effect this addresses an issue with CoW (mmap with MAP_PRIVATE
but no MAP_ANONYMOUS) when the memory is pinned for VFIO.
Fixes: #4805
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
After testing, io_uring_is_supported() causes about 38ms of
overhead when creating virtio-blk. By modifying the position
of io_uring_is_supported(), the overhead of creating virtio-blk
is reduced to less than 1ms when we close io_uring.
Signed-off-by: Jinrong Liang <cloudliang@tencent.com>
Until there is a need for sharing the memory fd with a child process, we
should err on the safe side to close it on exec.
Signed-off-by: Wei Liu <liuwe@microsoft.com>
Following the new design proposal to improve the restore codepath when
migrating a VM, all virtio devices are supplied with an optional state
they can use to restore from. The restore() implementation every device
was providing has been removed in order to prevent from going through
the restoration twice.
Here is the list of devices now following the new restore design:
- Block (virtio-block)
- Net (virtio-net)
- Rng (virtio-rng)
- Fs (vhost-user-fs)
- Blk (vhost-user-block)
- Net (vhost-user-net)
- Pmem (virtio-pmem)
- Vsock (virtio-vsock)
- Mem (virtio-mem)
- Balloon (virtio-balloon)
- Watchdog (virtio-watchdog)
- Vdpa (vDPA)
- Console (virtio-console)
- Iommu (virtio-iommu)
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The add_device() function, from the device manager code, takes a
DeviceConfig as a parameter, instead of a VmAddDevice.
The change was originally done as part of 34412c9b41 and it didn't
break Kata Containers because the VmAddDevice and DeviceConfig structs
share most of their fields, besides the optional for serialization
`pci_segment`, which is not used by the client yet.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
