Commit Graph

515 Commits

Author SHA1 Message Date
lizhaoxin1
b3b252a5d1 tests: Add integration test for --platform uuid
Signed-off-by: lizhaoxin1 <Lxiaoyouling@163.com>
2022-08-04 09:20:06 +02:00
Sebastien Boeuf
103494f441 tests: Improve live migration tests reliability
Move the live migration tests to a 'jammy' worker rather than
'jammy-small'. This type of worker has more CPUs (64 vs 16) and more RAM
(256G vs 64G), which should improve the time it takes to run each test.
With this improvement, the test shouldn't fail anymore due to timeout
being reached.

A second improvement is to reduce the amount of vCPUs created for each
VM. The point is simply to check we can migrate a VM with multiple
vCPUs, therefore using 2 instead of 6 should be enough when possible.
When testing NUMA, we can't lower the amount of vCPUs since there's a
quite complex topology that is expected there.
Also, the total amount of vCPUs is reduced from 12 to 4 (again when not
testing with NUMA).

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2022-08-03 10:42:45 -07:00
Sebastien Boeuf
9524a8ffe8 tests: Re-enable virtio_block_topology on aarch64
Improve error catching on the steps creating the block device so that we
can understand if qemu-img or losetup is the faulty command leading to
an empty device path.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2022-08-02 14:46:54 +02:00
Sebastien Boeuf
fa0565234c tests: Make test_api_shutdown and test_api_delete more reliable
Both of these tests have been sporadically failing through multiple CI
runs. The reason is related to cloud-init which fails to run the
"init-local" script during the second boot of the VM. This causes the
network interface to not be available, and therefore the test can't SSH
into the VM as expected. The root cause is the filesystem and cache
corruption that happens on the cloud-init disk.

The way to prevent from this issue is to sync the guest filesystem
before we shut it down, and as a security harness, we also wait for a
few seconds for the shutdown command to complete inside the guest before
we trigger the API shutdown or delete.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2022-08-02 13:13:06 +02:00
Sebastien Boeuf
561791ed22 tests: Reliably trigger a guest OOM
Rely on /proc/sysrq-trigger to forcibly trigger an OOM in the guest.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2022-07-26 09:22:38 +02:00
Sebastien Boeuf
ec27e0ee82 tests: Fix test_virtio_balloon_deflate_on_oom()
It might sometimes take a few seconds for the guest to trigger the OOM
and report it back to the host. That's why this patch adds some sleep
time between the command in the guest supposedly triggering the OOM and
the check of the balloon size from the host.

Fixes #4336

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2022-07-21 12:00:14 +01:00
Rob Bradford
9fdfdf25fb tests: Disable test_windows_guest_snapshot_restore for now
See: #4327

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2022-07-18 17:42:14 +01:00
Rob Bradford
f8f2f09a19 tests: Skip test_vfio for now
See: #4324

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2022-07-18 14:35:41 +01:00
Rob Bradford
30da293d8f tests: Report stderr on ch-remote command failure
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2022-07-04 09:18:18 +02:00
Rob Bradford
67bfd4e234 tests: tests_api_create_boot: Use ch-remote for creating and booting vm
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2022-07-04 09:18:18 +02:00
Rob Bradford
0c82e7593d tests: Remove test on available entropy bits
As far as I can tell this always reports 256 for us now:
https://lore.kernel.org/lkml/YmlMGx6+uigkGiZ0@zx2c4.com/

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2022-07-01 18:45:05 +01:00
Rob Bradford
2716bc3311 build: Fix beta clippy issue (derive_partial_eq_without_eq)
warning: you are deriving `PartialEq` and can implement `Eq`
  --> vmm/src/serial_manager.rs:59:30
   |
59 | #[derive(Debug, Clone, Copy, PartialEq)]
   |                              ^^^^^^^^^ help: consider deriving `Eq` as well: `PartialEq, Eq`
   |
   = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#derive_partial_eq_without_eq

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2022-06-30 20:50:45 +01:00
Wei Liu
32b855df3a tests: switch from lazy_static to once_cell
Once_cell does not require using macro and is slated to become part of
Rust std at some point.

Signed-off-by: Wei Liu <liuwe@microsoft.com>
2022-06-20 16:03:07 +01:00
Rob Bradford
7c8719b4ea tests: Unify API based boot across architectures
Use direct kernel boot for all the tests that create the VM via API.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2022-06-17 16:52:56 +01:00
Rob Bradford
094625242d tests: Add tests for vm.delete and vm.shutdown
Fixes: #1295

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2022-06-16 11:29:33 +01:00
Yi Wang
fd41892065 tests: Add integration test for coredump
As coredump function is to make a vmcore for crash tool to analyze,
in order not to introduce a big thing in integration, we just check
if ch-remote command runs no error report here.

Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
2022-05-30 13:41:40 +02:00
Rob Bradford
5da8a1c08e tests: Use smaller hotplug size for live migration tests
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2022-05-27 11:30:27 +02:00
Rob Bradford
62120f9afe tests: Remove testing of virtio-fs DAX cache
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2022-05-27 09:47:13 +02:00
Rob Bradford
56c11600db tests: Rename test_virtio_fs helper
This is so we can have a test called test_virtio_fs

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2022-05-27 09:47:13 +02:00
Rob Bradford
f2336413be tests: Simplify virtiofsd spawning
The cache methodology is never changed so it can be hardcoded.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2022-05-27 09:47:13 +02:00
Rob Bradford
75e3a3d982 tests: Use default timeout for booting in live migration tests
From the logs it appears that booting the VM to the point at which it
can signal to the host can sometimes take longer than then 30 seconds
specified.

Fixes: #4136

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2022-05-25 17:05:45 +01:00
Sebastien Boeuf
e674577ea9 tests: Fix clippy error on latest cargo beta version
The current patch fixes the following error that was raised by clippy:

error: this let-binding has unit value
    --> tests/integration.rs:6538:13
     |
6538 | /             let _ = stdin
6539 | |                 .write_all("type=7".as_bytes())
6540 | |                 .expect("failed to write stdin");
     | |_________________________________________________^
     |
     = note: `-D clippy::let-unit-value` implied by `-D warnings`
     = help: for further information visit
https://rust-lang.github.io/rust-clippy/master/index.html#let_unit_value
help: omit the `let` binding
     |
6538 ~             stdin
6539 +                 .write_all("type=7".as_bytes())
6540 +                 .expect("failed to write stdin");
     |

error: could not compile `cloud-hypervisor` due to previous error

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2022-05-20 09:59:43 +01:00
Bo Chen
32353fa389 event_monitor: Append double newlines after each event
This allows to consume and parse the output event output file.

Signed-off-by: Bo Chen <chen.bo@intel.com>
2022-05-17 09:55:03 +02:00
Bo Chen
33e2a7121e tests: Extend 'resize_command()' with event-monitor checks
Signed-off-by: Bo Chen <chen.bo@intel.com>
2022-05-17 09:55:03 +02:00
Bo Chen
2eb984b45d tests: Extend existing tests with checks on event monitor
In this way, we can cover a broad range of events from the event monitor
while avoiding code duplication.

Fixes: #4054

Signed-off-by: Bo Chen <chen.bo@intel.com>
2022-05-17 09:55:03 +02:00
Rob Bradford
4fed2d4ed7 tests: Use different API sockets when restoring
This prevents a conflict since the old API socket will not have been
cleaned up (due to the use of SIGKILL.)

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2022-04-29 18:40:49 +01:00
Bo Chen
eebf4f10e3 tests: Cover 'virtio-balloon' for live migration and live upgrade
Signed-off-by: Bo Chen <chen.bo@intel.com>
2022-04-27 12:27:49 -07:00
Bo Chen
3d1b2eb4e5 tests: Cover 'virtio-watchdog' for live migration and live upgrade
Signed-off-by: Bo Chen <chen.bo@intel.com>
2022-04-27 12:27:49 -07:00
Bo Chen
16740b4fcd tests: Refactor 'test_watchdog' for reusing
Signed-off-by: Bo Chen <chen.bo@intel.com>
2022-04-27 12:27:49 -07:00
Bo Chen
e97fe7a43e tests: Cover 'virtio-pmem' for live migration and live upgrade
Signed-off-by: Bo Chen <chen.bo@intel.com>
2022-04-27 12:27:49 -07:00
Sebastien Boeuf
2f47bea809 tests: Re-enable aarch64_acpi::test_virtio_iommu
Now that virtio-iommu has been fixed, the test can be enabled again.

Fixes #3941

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2022-04-26 13:07:32 +02:00
Rob Bradford
80de77a6e6 tests: Add integration test for --platform serial_number
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2022-04-21 17:17:08 +02:00
Bo Chen
82aa0e1222 tests: Disable live upgrade tests
Live upgrade is currently not guaranteed during this development cycle
and we will try to enable these tests after the next release.

Signed-off-by: Bo Chen <chen.bo@intel.com>
2022-04-20 11:51:50 -07:00
Bo Chen
edca82c4bd scripts, tests: Add live upgrade tests
By augmenting existing set of tests, this patch added a set of
tests for live-upgrade that covers use cases with NUMA,
vhost-user (OVS-DPDK), and local-migration.

Fixes: #3949

Signed-off-by: Bo Chen <chen.bo@intel.com>
2022-04-20 11:51:50 -07:00
Bo Chen
7e9c61ab18 tests: Add `test_live_migration_numa_local'
Signed-off-by: Bo Chen <chen.bo@intel.com>
2022-04-20 11:51:50 -07:00
Rob Bradford
719c9b8233 tests: Fix aarch64 clippy issues in integration tests
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2022-04-13 13:54:06 +01:00
Michael Zhao
9dd107bb03 tests: Revert the impact for the hidden 4MiB RAM
We modified a test case to workaround the RAM calculation error caused
by hidding 4MiB memory for UEFI. Now change it back to normal.

Signed-off-by: Michael Zhao <michael.zhao@arm.com>
2022-04-11 09:51:34 +01:00
Sebastien Boeuf
bf7daa8ade tests: Disable aarch64_acpi::test_virtio_iommu
Now that address translations performed by virtio-iommu can error out if
the address can't be translated, we uncovered an issue in integration
test aarch64_acpi::test_virtio_iommu.

We disable the test until we can investigate and fix the root cause.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2022-04-06 11:21:46 +02:00
Michael Zhao
261e39d8ab tests: Improve test_live_migration_numa
Set various initial memory node sizes in test case
`test_live_migration_numa`.

Signed-off-by: Michael Zhao <michael.zhao@arm.com>
2022-04-05 11:04:52 +08:00
Sebastien Boeuf
a2acc02f50 tests: Update test_vdpa_block to include vIOMMU testing
The extra vDPA device in the test is hotplugged behind the vIOMMU, which
covers the use case of placing a vDPA device behind a virtual IOMMU.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2022-04-05 00:09:52 +02:00
Bo Chen
4af04d8f49 tests: Enable 'test_vfio_user' using Jammy on 'aarch64'
Signed-off-by: Bo Chen <chen.bo@intel.com>
2022-03-31 09:22:07 +01:00
Bo Chen
d49363a5af tests: Enable guest console log for test_vfio_user
Signed-off-by: Bo Chen <chen.bo@intel.com>
2022-03-31 09:22:07 +01:00
Bo Chen
0e2cb9fd06 tests: Move to use Jammy guest image for test_vfio_user
Fixes: #3495

Signed-off-by: Bo Chen <chen.bo@intel.com>
2022-03-31 09:22:07 +01:00
Bo Chen
cec035c6e0 tests: Increase timeout after vfio-user device hotplug
As reported by the periodic CI runs, it may take more time for the NVMe
device to present in the guest after being hotplugged as a VFIO user
device on `aarch64` (especially under high load). Let's increase the
timeout after device hotplug from `1s` to `10s` to increase the test
stability.

Fixes: #3495

Signed-off-by: Bo Chen <chen.bo@intel.com>
2022-03-31 09:22:07 +01:00
Bo Chen
3679be3721 tests: Enable hugepages for test_vfio_user
This is will fix a warning reported from the SPDK/NVMe backend when the
memory address is not 2M aligned.

Signed-off-by: Bo Chen <chen.bo@intel.com>
2022-03-31 09:22:07 +01:00
Rob Bradford
c66be2e974 tests: Split test_simple_launch() into separate tests
This will make it much easier identify which tests are failing.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2022-03-29 15:20:58 +01:00
Rob Bradford
7c0cf8cc23 arch, devices, vmm: Remove "acpi" feature gate
Compile this feature in by default as it's well supported on both
aarch64 and x86_64 and we only officially support using it (no non-acpi
binaries are available.)

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2022-03-28 09:18:29 -07:00
Sebastien Boeuf
2ef201e43f tests: Simplify test_vdpa_block() to increase stability
It seems the vdpa_sim_block isn't behaving properly after the vhost
device is closed, as it sometimes returns EBUSY when we try to open it
again. The easiest way to deal with this issue is by simplifying the
integration test, avoid to plug the same device after it's been
unplugged.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2022-03-28 13:09:01 +01:00
Sebastien Boeuf
afd9f17b73 virtio-fs: Deprecate the DAX feature
Disable the DAX feature from the virtio-fs implementation as the feature
is still not stable. The feature is deprecated, meaning the 'dax'
parameter will be removed in about 2 releases cycles.

In the meantime, the parameter value is ignored and forced to be
disabled.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2022-03-24 10:39:11 -07:00
Sebastien Boeuf
fd40aceabb tests: Fix flakiness in test_vdpa_block()
The test is sporadically failing whenever we try to hotplug the vDPA
device we've just unplugged. This is causing the kernel to complain with
EBUSY because the device hasn't been released yet. This is happening
because the CI system is under very high load, therefore taking quite
some time to the host to update the state of this device.

The easy way to fix such issue is by increasing the sleep time between
the unplug and the replug.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2022-03-24 15:15:51 +01:00
Rob Bradford
0834eca8d4 vmm: config: Validate IOMMU configuration
Ensure devices that are specified to be on a PCI segment that is behind
the IOMMU are IOMMU enabled if possible or error out for those devices
that do not support it.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2022-03-22 11:13:20 +00:00
Sebastien Boeuf
03014e2e7f tests: Add integration tests for vDPA
Adding two new integration tests for vDPA, relying on both block and net
simulators from the host kernel.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2022-03-18 12:28:40 +01:00
Rob Bradford
71d911b3aa tests: Add test for virtio-net control queue
Use ethtool to trigger an event on the control queue.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2022-03-10 11:27:35 +00:00
Rob Bradford
b2bf88bcb1 tests, scripts: Rename virtiofsd binary
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2022-02-21 10:42:36 +00:00
Rob Bradford
75fbea3c46 tests: Rename prepare_virtiofsd_rs_daemon
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2022-02-21 10:42:36 +00:00
Rob Bradford
4c4eb8db40 tests: Drop classic (i.e. C based) virtiofsd testing
This has been deprecated upstream in favour of the Rust version.

Fixes: #3729

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2022-02-21 10:42:36 +00:00
Bo Chen
6daddf0831 tests: Add "test_live_migration_ovs_dpdk_local()" test
In this way, we can cover local-migration with dpdk in our regular CI,
to prevent similar regressions reported and fixed by #3657.

Fixes: #3659

Signed-off-by: Bo Chen <chen.bo@intel.com>
2022-02-21 08:56:14 +01:00
Rob Bradford
d0789871a5 tests: Add test_iommu_segments integration test
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2022-02-11 11:20:04 +00:00
Sebastien Boeuf
da20fa74c6 tests: Add new integration test for free page reporting
Introducing a new integration test relying on the virtio-balloon ability
to free host pages that have been reported as freed by the guest.

This test checks that after consuming a lot of RAM in the guest, the VMM
process is able to releases the pages reported by the guest. Simply done
by checking the RSS associated with the VMM's process follows the memory
trend in the guest.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2022-02-11 12:10:07 +01:00
Bo Chen
7f987552ef test_infra: Move struct Guest and struct GuestCommand from tests
In this way, these structs can be reused for performance tests.

Signed-off-by: Bo Chen <chen.bo@intel.com>
2022-02-07 10:34:00 +01:00
Bo Chen
a3a175216a tests: Remove reference to hardcoded constants from struct Guest
In this way, we allows to reuse the struct `Guest` with kernel paths and
kernel commands (e.g. hardcoded constants) that are tests-specific.

Signed-off-by: Bo Chen <chen.bo@intel.com>
2022-02-07 10:34:00 +01:00
Bo Chen
7a3d8c6299 tests: Construct firmware path from tests explicitly
Instead of using hardcoded firmware paths inside the `Guest` struct
constructor, this commit removes `fw_path` related code paths from the
`Guest` struct and asks each test constructs its firmware path
explicitly. This allows better flexibility for the `Guest` struct so
that it can be reused for the performance tests we are adding soon.

Signed-off-by: Bo Chen <chen.bo@intel.com>
2022-02-07 10:34:00 +01:00
Sebastien Boeuf
e9eb2c5dbc tests: Update macvtap integration tests with multiqueue
Now that multiple file descriptors can be provided along with add-net,
that means we can hotplug a multiqueue macvtap interface to the VM.

The common macvtap test is updated, meaning that both coldplug and
hotplug codepath now use multiqueue.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2022-01-31 10:37:53 +00:00
Jianyong Wu
e9b069bf38 tests: add test case for testing PMU on direct kernel boot
Add integration tests for "pmu=on". It depends on checking if there
is "arm-pmu" item in "/proc/interrupts". As PMU info has not been added
to ACPI, the tests are only for dt.

Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
2022-01-21 17:59:36 +08:00
Sebastien Boeuf
ae68c2f31a tests: Increase timeout when booting with firmware
As it might take more time for the VM to boot (especially under high
load) when using the firmware, let's increase the timeout waiting for
the VM to be reachable.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2022-01-21 09:46:19 +00:00
Sebastien Boeuf
eb5c5f2c7f tests: Add integration test for O_DIRECT
Both OVMF and RHF firmwares triggered an error when O_DIRECT was used
because they didn't align the buffers to the block sector size.

In order to prevent regressions, we're adding a new test validating the
VM can properly boot when the OS disk is opened with O_DIRECT and booted
from the rust-hypervisor-fw.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2022-01-20 11:49:02 +00:00
Henry Wang
b4566b9eab tests: ignore the result from test_vfio_user
As it is currently unstable.

Signed-off-by: Henry Wang <Henry.Wang@arm.com>
2022-01-20 11:40:30 +00:00
Henry Wang
b7b3b45364 tests: Enable test_vfio_user for AArch64
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
2022-01-18 18:00:00 -08:00
Sebastien Boeuf
779bc1a53a edk2: Rely on latest OVMF based on CloudHvX64 target
Update documentation and CI to rely on the new CLOUDHV.fd firmware built
from the newly introduced target CloudHvX64.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2022-01-18 11:58:26 +01:00
Rob Bradford
cb243571de tests: Add test_live_migration_local() test
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2022-01-18 09:07:47 +00:00
Rob Bradford
b204f43aae tests: Fix beta clippy issues
error: this boolean expression can be simplified
    --> tests/integration.rs:3755:33
     |
3755 |                         assert!(!(empty > 5), "No login on pty");
     |                                 ^^^^^^^^^^^^ help: try: `empty <= 5`
     |
     = note: `-D clippy::nonminimal-bool` implied by `-D warnings`
     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#nonminimal_bool

error: unneeded late initalization
    --> tests/integration.rs:7619:13
     |
7619 |             let mut success;
     |             ^^^^^^^^^^^^^^^^
     |
     = note: `-D clippy::needless-late-init` implied by `-D warnings`
     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_late_init
help: declare `success` here
     |
7621 |             let mut success = if let Some(status) = send_migration
     |             +++++++++++++++++
help: remove the assignments from the branches
     |
7625 ~                 status.success()
7626 |             } else {
7627 ~                 false
     |
help: add a semicolon after the `if` expression
     |
7628 |             };
     |              +

error: unneeded late initalization
    --> tests/integration.rs:7838:13
     |
7838 |             let mut success;
     |             ^^^^^^^^^^^^^^^^
     |
     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_late_init
help: declare `success` here
     |
7840 |             let mut success = if let Some(status) = send_migration
     |             +++++++++++++++++
help: remove the assignments from the branches
     |
7844 ~                 status.success()
7845 |             } else {
7846 ~                 false
     |
help: add a semicolon after the `if` expression
     |
7847 |             };
     |              +

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2022-01-14 14:33:18 +00:00
Bo Chen
6738e45b37 tests: Add crate-level attribute to silence "dead-code" warnings
When enabling the `mshv` feature, we skip quite some tests and
hence have known dead-code. This annotation silences dead-code
related warnings for our quality workflow to pass.

Signed-off-by: Bo Chen <chen.bo@intel.com>
2022-01-10 10:29:07 +01:00
Bo Chen
e7a2a715e0 tests: Remove unnecessary annotations integration_tests and test
Given integration tests are placed in a dedicate directory, they don't
need annotations (e.g. `#[cfg(integration_test)]` and `#[cfg(test)]`) or
defining `test mod` to exclude themselves from the common compilation
process.

Signed-off-by: Bo Chen <chen.bo@intel.com>
2022-01-10 10:29:07 +01:00
Sebastien Boeuf
210a29f05c tests: Disable test_vfio_user
The test test_vfio_user is flaky, let's disable it until we find the
right way to fix it.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2022-01-03 12:59:23 +01:00
Sebastien Boeuf
21a21ce51a tests: Disable test_virtio_block_topology for aarch64
The test test_virtio_block_topology is flaky on aarch64, let's disable
it until we find the right way to fix it.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2022-01-03 12:59:23 +01:00
Rob Bradford
6a76a6772d tests: Add integration test for virtio-block topology
This test relies on using losetup with a block size to create a block
device from a file that has a specific block size for the topology
detection code to pick up and passthrough to the guest.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2021-12-17 12:42:10 +01:00
Sebastien Boeuf
7bce72dff3 tests: Re-enable vfio_user integration test
This time we use the Rust Hypervisor Firmware for test_vfio_user() in
order to fix the systemd issues we've seen so far.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2021-12-08 14:38:30 +00:00
Rob Bradford
eea2907daf build: Use OVMF binary released from edk2 repo
Fixes: #3415

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2021-12-07 10:34:05 +01:00
Henry Wang
00bb1ea1d5 tests: Enhance test for multiple PCI segments
This commit enhances the integration test for multiple PCI segments
by:

(1) Enables the `test_virtio_fs_multi_segment` on AArch64.

(2) Adds a new integration test case for both x86_64 and AArch64 using
the direct kernel boot to test virtio-disk multiple PCI segments.
The test case does:
- Start a VM using direct kernel boot with 16 PCI segments and assign
the last PCI segment with a virtio-disk device.
- Check if the number of PCI host bridges equals to 16 after VM boots.
- Mount the virtio-disk device on the last PCI segment to the rootfs
and write/read data to the virtio-disk device.

Signed-off-by: Henry Wang <Henry.Wang@arm.com>
2021-12-06 09:29:49 +00:00
Sebastien Boeuf
cab0b3446f tests: Test OVMF with Linux guest
Extending the test_simple_launch() integration test to validate Cloud
Hypervisor boots correctly with both rust-hypervisor-fw and OVMF on
x86_64 platforms.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2021-12-04 23:04:32 +01:00
Sebastien Boeuf
9b0fe505ca ci: Update the OVMF version the tests rely on
Bumping the OVMF binary version along with UEFI documentation to
reflect the latest set of patches on top of tianocore/edk2 'master'
branch, which can be found on the Cloud Hypervisor fork on 'ch' branch.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2021-12-04 23:04:32 +01:00
Henry Wang
788d77aee5 tests: Update the virtiofsd-rs cmdline
Commit ac25172176 bumps the rust
version of virtiofsd named `virtiofsd-rs`, which causes a warning
```
warning: use of deprecated parameter '--socket':
Please use the '--socket-path' option instead.
```

This commit updates the cmdline parameter accordingly.

Signed-off-by: Henry Wang <Henry.Wang@arm.com>
2021-12-04 13:45:50 +01:00
Bo Chen
32dd4d10d0 tests: Temporarily disable test_vfio_user
This test is flaky (#3400) while we are experiencing a bug of using the latest
SPDK/NVMe backend as VFIO user device (#3401). Let's disable this test
before we fix the above two issues.

Signed-off-by: Bo Chen <chen.bo@intel.com>
2021-12-02 12:43:11 +01:00
Bo Chen
27b5f8756f tests: Add integration test for vfio-user with SPDK NVMe
For now we only enable the vfio-user test on x86_64 platform, as we have
a known hanging issue to resovle on the aarch64 platform.

Fixes: #3098

Signed-off-by: Bo Chen <chen.bo@intel.com>
2021-12-01 10:31:54 +00:00
Michael Zhao
17b0f40154 tests: Enable PCI-segment tests
Enabled following hot-plug tests:
 - virtio-net
 - virtio-pmem
 - virtio-fs

Signed-off-by: Michael Zhao <michael.zhao@arm.com>
2021-12-01 09:24:01 +08:00
Sebastien Boeuf
6a7a588268 tests: Add integration test for CPU affinity
This new integration test validates the vCPUs are running on the
expected set of CPUs on the host.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2021-11-12 09:40:37 +00:00
Sebastien Boeuf
b81d758c41 option_parser: Expect commas instead of colons for lists
The elements of a list should be using commas as the correct delimiter
now that it is supported. Deprecate use of colons as delimiter.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2021-11-09 08:59:59 +01:00
Rob Bradford
bad26133cb tests: Add test_virtio_fs_multi_segment{_hotplug}
Refactor the existing virtio fs test to support controlling the PCI
segment the device should be added to and use this for a multiple
segment test.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2021-11-02 16:55:42 +00:00
Rob Bradford
b881339866 tests: Add test_net_multi_segment_hotplug
Refactor the existing net hotplug test to support controlling the PCI
segment the device should be added to and use this for a multiple
segment test.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2021-11-02 16:55:42 +00:00
Rob Bradford
0afa619d2c tests: Add test_pmem_multi_segment_hotplug
Refactor the existing pmem hotplug test to support controlling the PCI
segment the device should be added to and use this for a multiple
segment test.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2021-11-02 16:55:42 +00:00
Rob Bradford
4ae8ee2376 tests: Use assert!() rather than if+panic
As identified by the new beta clippy.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2021-10-19 19:42:36 +01:00
Wei Liu
3e0bf235bb tests: consolidate arch constants into modules
This avoids having cfg(...) for each individual line. No functional
change.

Signed-off-by: Wei Liu <liuwe@microsoft.com>
2021-10-08 10:51:14 -07:00
Henry Wang
db5d66747e tests: Enable device hotplug test cases on AArch64
On AArch64, device hotplug can be enabled with ACPI. Therefore,
this commit enables the hotplug test case for following devices:

- PCI bar reprogramming
- virtio-disk
- virtio-net
- macvtap
- virtio-vsock
- virtio-pmem: Works with the latest reference kernel
- virtio-fs: Works with the latest reference kernel

Signed-off-by: Henry Wang <Henry.Wang@arm.com>
2021-09-29 17:37:43 +01:00
Henry Wang
8c135030d0 tests: Mute warning when building tests on AArch64
Currently vfio and nested virtualization is not used on AArch64,
and SGX is a x86_64 only feature. Therefore this commit adds the
architecture gates for helper functions related to vfio, SGX, and
nested virtualization to mute warnings when building tests on the
AArch64 platform.

Signed-off-by: Henry Wang <Henry.Wang@arm.com>
2021-09-29 17:37:43 +01:00
Jianyong Wu
277ff84e55 tests: Enable memory hotplug and virtio_balloon on arm64
Memory hotplug and virtio_balloon works on arm64 with:

- memory hotplug: An updated kernel using ACPI
- virtio balloon: `stress` installed in the cloud image

Therefore, we can enable test cases for them in integration test.

Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
2021-09-29 16:32:51 +01:00
Muminul Islam
73244aa6f2 tests: Disable unsupported tests for MSHV
On MSHV some of the integration test cases are not supported yet
or still in progress. This patch disables all those test cases.

Signed-off-by: Muminul Islam <muislam@microsoft.com>
2021-09-29 15:02:50 +01:00
Rob Bradford
1511cbda87 tests, scripts: Update custom aarch64 image to include "stress"
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2021-09-29 15:01:46 +01:00
Sebastien Boeuf
562a57012f tests: Update virtiofsd-rs to use the cache option
Now that virtiofsd-rs binary supports the cache option, let's use it.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2021-09-28 19:48:17 +01:00
Sebastien Boeuf
93d19329f9 tests: Extend snapshot/restore test with virtio-mem
Add virtio-mem plug/unplug testing to the existing snapshot/restore
integration test.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2021-09-28 10:15:22 -07:00
Sebastien Boeuf
612dc544a8 tests: Extend live migration testing with virtio-mem
Adding some bits to the existing live migration test with NUMA in order
to properly validate virtio-mem works with live migration.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2021-09-28 10:15:22 -07:00
Michael Zhao
7383087230 tests: Enable virtio-iommu test on AArch64
Refactored the test case `test_virtio_iommu` to adapt architectures and
different choices among ACPI and FDT. In the case of ACPI, a Focal image
with modified kernel is tested.

Signed-off-by: Michael Zhao <michael.zhao@arm.com>
2021-09-24 07:57:57 +01:00
Sebastien Boeuf
6fb88c3c5a virtio-devices: balloon: Add snapshot/restore support
Adding the snapshot/restore support along with migration as well,
allowing a VM with a virtio-balloon device attached to be properly
migrated.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2021-09-21 14:47:17 +02:00
Bo Chen
d6c08d902b ci: Use the pre-installed virtiofsd
Signed-off-by: Bo Chen <chen.bo@intel.com>
2021-09-20 16:47:28 +01:00
Michael Zhao
9dc9e224b9 tests: Enable IOMMU test case on AArch64
For AArch64, now virtual IOMMU is only tested on FDT, not ACPI.
In the case of FDT, the behavior of IOMMU is a bit different with ACPI.
All the devices on the PCI bus will be attached to the virtual IOMMU,
except the virtio-iommu device itself. So these devices will all be
added to IOMMU groups, and appear in folder '/sys/kernel/iommu_groups/'.

The result is, on AArch64 IOMMU group '0' contains "0000:00:01.0" which
is the console device. But on X86, console device is not attached to
IOMMU. So the IOMMU group '0' contains "0000:00:02.0" which is the first
disk.

Signed-off-by: Michael Zhao <michael.zhao@arm.com>
2021-09-17 12:19:46 +02:00
Bo Chen
2e56f0df77 ci: Rustify ovs-dpdk setup and cleanup
Signed-off-by: Bo Chen <chen.bo@intel.com>
2021-09-10 07:41:15 +01:00
Bo Chen
a181b77bc8 ci: Add integration test for live migration with OVS-DPDK
Signed-off-by: Bo Chen <chen.bo@intel.com>
2021-09-10 07:41:15 +01:00
Bo Chen
9023412e31 tests: Refactor test_ovs_dpdk
This patch adds a separate function to launch two guest VMs and ensure
they are connected through ovs-dpdk, so that we can reuse this function
in other tests, e.g. the test for live-migration with ovs-dpdk.

Signed-off-by: Bo Chen <chen.bo@intel.com>
2021-09-10 07:41:15 +01:00
Jianyong Wu
579710d3e0 tests: Enable some virtio-pmem test for Arm64
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
2021-09-08 09:40:48 +01:00
Henry Wang
4d8a73735b tests: Enable Arm64 user defined mem regions test
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
2021-09-08 09:40:48 +01:00
Henry Wang
25798a97b3 tests: Restructure AArch64 tests
Currently we need to test both device tree and ACPI on AArch64. As
the number of ACPI test cases is gradually increasing and expected
to increase in the future, it is better to extract all ACPI test
cases on AArch64 to a single module.

Signed-off-by: Henry Wang <Henry.Wang@arm.com>
2021-09-07 09:35:06 +01:00
Jianyong Wu
2752b07762 enable virtio-mem test for arm64
virtio-mem has enabled on arm64. let's test it.

Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
2021-09-07 09:34:22 +01:00
Henry Wang
1bf083bf00 tests: Add a test case for Arm64 ACPI power button
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
2021-09-03 10:27:52 -07:00
Bo Chen
6c142e35f7 tests: Add test_live_migration_numa
This patch refactors and reuses the existing 'test_live_migration' for
adding 'test_live_migraiton_numa'.

Signed-off-by: Bo Chen <chen.bo@intel.com>
2021-09-03 06:50:01 +01:00
Bo Chen
32da33eacd tests: Refactor common checks on numa
This patch adds a separate function to perform common numa checks, so
that we can reuse this function in other tests, e.g. the test for
live-migration with numa.

Signed-off-by: Bo Chen <chen.bo@intel.com>
2021-09-03 06:50:01 +01:00
Bo Chen
92a506fb06 tests: Add the integration test for live migration
This test exercises the local live-migration between two Cloud
Hypervisor VMs on the same host. It ensures the following behaviors:
1. The source VM is up and functional (including various virtio-devices
are working properly);
2. The 'send-migration' and 'receive-migration' command finished
successfully;
3. The source VM terminated gracefully after live migration;
4. The destination VM is functional (including various virtio-devices
are working properly) after live migration.

Note: This test does not use vsock as we can't create two identical
vsock on the same host.

Fixes: #2965

Signed-off-by: Bo Chen <chen.bo@intel.com>
2021-09-02 14:57:31 +01:00
Bo Chen
72eb533f56 tests: Refactor test_snapshot_restore
This patch adds a dedicate function to include the common checks on the
virtio-devices from the 'test_snapshot_restore' test, which will also be
reused for the upcoming 'test_live_migration' test.

Signed-off-by: Bo Chen <chen.bo@intel.com>
2021-09-02 14:57:31 +01:00
Fazla Mehrab
1fa3a60b35 tests: integration tests for the fixed and dynamic VHDx implementation
Two tests for booting Linux cloud image from the different VHDx files:
fixed and dynamic. Another test for testing the dynamic expansion of a
generated VHDx file.

Signed-off-by: Fazla Mehrab <akm.fazla.mehrab@intel.com>
2021-08-19 11:43:19 +02:00
Henry Wang
1d403ea5d6 tests: Add test_guest_numa_nodes_dt test case
This commit adds an AArch64-only integration test case called
`test_guest_numa_nodes_dt` so that it is possible to test the
NUMA for the FDT on AArch64 platform.

Signed-off-by: Henry Wang <Henry.Wang@arm.com>
2021-08-12 10:49:02 +02:00
Henry Wang
c6dd9918d5 tests: Add AArch64 ACPI CPU topology tests
AArch64 CPU topology can be described using either device tree or
ACPI. Therefore, the integration test should also cover the AArch64
ACPI CPU topology tests.

Signed-off-by: Henry Wang <Henry.Wang@arm.com>
2021-08-05 21:19:16 +08:00
Henry Wang
db102a2547 tests: Enable CPU topology for AArch64
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
2021-08-05 21:19:16 +08:00
Sebastien Boeuf
4abcb0a33c tests: Add snapshot/restore to OVS DPDK integration test
Now that vhost-user supports being snapshot and restored, we extend the
existing test_ovs_dpdk to validate snapshot/restore feature works as
expected.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2021-07-29 06:35:03 -07:00
Sebastien Boeuf
48d1a31e08 tests: Introduce test_macvtap_hotplug
The existing test_macvtap is factorized to be able to support both
coldplug and hotplug of a macvtap interface through virtio-net. Adding
the new test_macvtap_hotplug test allows for validating that sending a
TAP file descriptor through control message along with the add-net
command works.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2021-07-21 15:34:22 +02:00
Sebastien Boeuf
2ecced376e tests: Update test_macvtap to rely on exec_host_command_status()
To help with readability, we rely on exec_host_command_status() from the
macvtap test, which replaces the former "bash -c ..." syntax.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2021-07-21 15:34:22 +02:00
Bo Chen
1365388f0b tests: Extend 'test_vfio' with block device passthrough
Fixes: #2822

Signed-off-by: Bo Chen <chen.bo@intel.com>
2021-07-13 14:08:57 +02:00
Sebastien Boeuf
9aedabe11e sgx: Add mandatory id field to SgxEpcConfig
In order to uniquely identify each SGX EPC section, we introduce a
mandatory option `id` to the `--sgx-epc` parameter.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2021-07-09 14:45:30 +02:00
Henry Wang
894a46f30c tests: Re-enable AArch64 snapshot/restore test
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
2021-07-05 22:51:56 +02:00
Rob Bradford
28b80ba42a tests: Change string checking for console success
The output from getty ("login:") does not always appear. This can be
observed interactively when booting the VM. (Mashing return will bring
it up.) Instead of checking for that string to ensure the VM has booted
instead check for a message from systemd to say it has started the SSH
daemon.

Fixes: #2799

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2021-06-28 17:09:16 +01:00
Rob Bradford
f40e8ce6b7 tests: For test_console_file print out the console file
This should aid debugging of this test flakiness.

See: #2799

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2021-06-25 08:55:11 -07:00
Henry Wang
48326ce731 tests: Enable test_numa_nodes() on AArch64
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
2021-06-25 10:22:40 +01:00
Anatol Belski
5e42e0f1f7 tests: Add case for multiple net devices for Windows guest
Signed-off-by: Anatol Belski <anbelski@linux.microsoft.com>
2021-06-25 10:22:28 +01:00
Michael Zhao
d330d91e1a tests: Optimize integration test on AArch64
AArch64 tests were divided into 2 steps:
- Build and test with 'acpi' feature
- Build and test without 'acpi'

This can be optimized. We need only to build and test once with default
features ('acpi' is enabled).

On AArch64, ACPI only works with UEFI. If UEFI is not available, guest
kernel fall back to use FDT. Most AArch64 test cases boot from direct
kernel, the guest will keep using FDT even if ACPI is enabled. So
nothing is broken.

Signed-off-by: Michael Zhao <michael.zhao@arm.com>
2021-06-24 13:13:27 +01:00
Bo Chen
5825ab2dd4 clippy: Address the issue 'needless-borrow'
Issue from beta verion of clippy:

Error:    --> vm-virtio/src/queue.rs:700:59
    |
700 |             if let Some(used_event) = self.get_used_event(&mem) {
    |                                                           ^^^^ help: change this to: `mem`
    |
    = note: `-D clippy::needless-borrow` implied by `-D warnings`
    = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_borrow

Signed-off-by: Bo Chen <chen.bo@intel.com>
2021-06-24 08:55:43 +02:00
Sebastien Boeuf
4d36ecef9e tests: Fix virtio_balloon integration test
The virtio_balloon test is a bit flaky since we can't really know how
much the balloon is gonna be deflated when the guest is under memory
pressure. That's why it's safer to simply check that the balloon is not
the initial size anymore.

One small detail, but we don't need to check for the balloon size to be
higher than 0 since the returned value is a u64.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2021-06-22 11:49:53 +02:00
Anatol Belski
dc15e44e2a tests: Add test for Windows guest multiple disk hotplug
Additionally, he disk creation routine is extended to support NTFS and
variable image size.

Signed-off-by: Anatol Belski <anbelski@linux.microsoft.com>
2021-06-17 16:17:44 +02:00
Sebastien Boeuf
a36ac96444 vmm: cpu_manager: Add _PXM ACPI method to each vCPU
In order to allow a hotplugged vCPU to be assigned to the correct NUMA
node in the guest, the DSDT table must expose the _PXM method for each
vCPU. This method defines the proximity domain to which each vCPU should
be attached to.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2021-06-17 16:08:46 +02:00
Michael Zhao
9708019312 tests: Enhance test_large_vm case
Enhanced the test case test_large_vm to check the number of total VCPUs
and on-line VCPUs.

Signed-off-by: Michael Zhao <michael.zhao@arm.com>
2021-06-16 15:38:23 +02:00
Fei Li
2c576ab312 test: Introduce test_virtio_balloon() function
The new test_virtio_balloon() is to verify if the 'deflate_on_oom'
parameter works. Its testing result is as follows:

1. Start a 4G guest with 2G balloon, check memory once starts up.
total_mem    is 4294967296 bytes
actual_mem   is 2147483648 bytes
orig_balloon is 2147483648 bytes
       total      used      free    shared    buff/cache    available
Mem:   3.8Gi     2.1Gi     1.6Gi     0.0Ki         140Mi        1.6Gi
Swap:     0B        0B        0B

2. Run a command in guest to eat up 25G memory, and check again.
total_mem        is 4294967296 bytes
actual_mem       is 3121610752 bytes
deflated_balloon is 1173356544 bytes
       total      used      free    shared    buff/cache    available
Mem:   3.8Gi     1.2Gi     2.6Gi     0.0Ki          49Mi        2.5Gi
Swap:     0B        0B        0B

From above, we can notice the balloon memory indeed deflates from
2147483648 bytes to 1173356544 bytes once an oom is going to be
triggered.

Signed-off-by: Fei Li <lifei.shirley@bytedance.com>
2021-06-16 09:55:22 +02:00
Fei Li
de7cfd61a0 tests: Clean up unused workload_path
Signed-off-by: Fei Li <lifei.shirley@bytedance.com>
2021-06-15 15:21:26 +02:00
Anatol Belski
57f70c0761 tests: Simplify Windows guest boot and DHCP setup
A new method has been introduced for WindowsGuest, that would poll on
the SSH connection and try to execute a test command. When successfull,
the polling stops and the guest is considered finished boot. The
downside of this method is that the network setup is needed always even
if the test doesn't use network, however it complies with the behavior
of other tests. I also observe a bit more stability on the local test
run, however it still appears to be a resource issue so some sporadic
fails are possible on a slower machine.

The hardcoded timeouts for guest boot and DHCP setup have been removed.

The dnsmasq invocation uses `--bind-dynamic` so then the daemon can be
started while the target interface could be down yet.

Signed-off-by: Anatol Belski <anbelski@linux.microsoft.com>
Co-authored-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2021-06-14 09:38:34 +02:00
Michael Zhao
f060ecd705 tests: Unblock some vhost-user tests
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
2021-06-11 11:03:08 +02:00
Henry Wang
31e4d80caf tests: Enable AArch64 API pause/resume test case
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
2021-06-11 09:05:54 +02:00
Michael Zhao
7cfb2139d0 tests: Enable pty test case on AArch64
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
2021-06-10 15:05:25 +02:00
Michael Zhao
97307a7fc1 tests: Remove test_aarch64_pe_boot case
test_aarch64_pe_boot was added at the very beginning of AArch64 support.
Now it can be combined to test_vmlinux_boot.

Renamed test_vmlinux_boot to test_direct_kernel_boot for generality.

Signed-off-by: Michael Zhao <michael.zhao@arm.com>
2021-06-10 10:10:53 +02:00
Michael Zhao
6ed1f83a87 tests: Enable the boot_noacpi case on AArch64
Enabled test case test_vmlinux_boot_noacpi on AArch64 and renamed it
test_direct_kernel_boot_noacpi for generality.

Signed-off-by: Michael Zhao <michael.zhao@arm.com>
2021-06-10 10:10:53 +02:00
Michael Zhao
04aff2e2f9 tests: Enable test_console_file case on AArch64
This test case could have been ready on AArch64 since the serial issue
was fixed.

Signed-off-by: Michael Zhao <michael.zhao@arm.com>
2021-06-10 10:10:53 +02:00
Sebastien Boeuf
9dba097224 ci: Update guest cloud image by installing "stress" utility
Some new integration tests will require the "stress" binary to be
present in the guest in order to run correctly.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2021-06-09 14:34:55 +01:00
Michael Zhao
ce5c5833cb tests: Add a simple test case for ACPI on AArch64
In the test case, the guest boots from EDK2.

Signed-off-by: Michael Zhao <michael.zhao@arm.com>
2021-06-09 18:36:59 +08:00
Sebastien Boeuf
bb68e0bc3b tests: Re-enable virtiofsd tests
Re-enable virtiofsd testing now that issues with capstone repository
have been resolved.

This reverts commit a14c70019a.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2021-06-08 20:13:41 +02:00
Sebastien Boeuf
1e2aa769e5 test_infra, tests: Introduce exec_host_command_output() function
This new function allows for better readability of the code by
factorizing a few of lines of code into a single one.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2021-06-04 16:25:41 +02:00
Sebastien Boeuf
8091c28dd5 tests: Make sure exec_host_command_status() succeeds
It's important to verify the actual exit code returned from the new
function exec_host_command_status() to ensure the command ran
successfully.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2021-06-04 16:25:41 +02:00