The logic of determining VCPU index in creating `cpu-map` node of FDT
can be optimized.
The code is invoked when VCPU topology is specified.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
In Flattened Device Tree (FDT) on AArch64, the VCPU topology is
represented by `cpu-map` node. The source code of creating the node
can be simplified.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
Drop the unused parameter throughout the code base.
Also take the chance to drop a needless clone.
No functional change intended.
Signed-off-by: Wei Liu <liuwe@microsoft.com>
error: unneeded late initalization
Error: --> arch/src/aarch64/gic/gicv3_its.rs:127:9
|
127 | let attr: u64;
| ^^^^^^^^^^^^^^
|
= note: `-D clippy::needless-late-init` implied by `-D warnings`
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_late_init
help: declare `attr` here
|
128 | let attr: u64 = if save {
| +++++++++++++++
help: remove the assignments from the branches
|
129 ~ u64::from(kvm_bindings::KVM_DEV_ARM_ITS_SAVE_TABLES)
130 | } else {
131 ~ u64::from(kvm_bindings::KVM_DEV_ARM_ITS_RESTORE_TABLES)
|
help: add a semicolon after the `if` expression
|
132 | };
| +
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Each PCI device under a root complex is uniquely identified by its
Requester ID (AKA RID). A Requester ID is a triplet of a Bus number,
Device number, and Function number.
MSIs may be distinguished in part through the use of sideband data
accompanying writes. In the case of PCI devices, this sideband data
may be derived from the Requester ID. A mechanism is required to
associate a device with both the MSI controllers it can address,
and the sideband data that will be associated with its writes to
those controllers.
This commit adds the `msi-map` property for PCI nodes, therefore
creating MSI mapping for each PCI device.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
This commit rewrites the `create_pci_node` in the FDT creator to
create multiple PCI nodes based on the vector of `PciSpaceInfo`,
and each PCI node in FDT reflects a PCI segment.
- The PCI MMIO config space, 32 bits PCI device space and 64 bits
PCI device space is re-calculated based on the `PciSpaceInfo` for
each PCI segment.
- A new FDT property `linux,pci-domain` is added.
- The virtio-iommu node is only created for the first PCI segment.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
The constant `PCI_MMIO_CONFIG_SIZE` defined in `vmm/pci_segment.rs`
describes the MMIO configuation size for each PCI segment. However,
this name conflicts with the `PCI_MMCONFIG_SIZE` defined in `layout.rs`
in the `arch` crate, which describes the memory size of the PCI MMIO
configuration region.
Therefore, this commit renames the `PCI_MMIO_CONFIG_SIZE` to
`PCI_MMIO_CONFIG_SIZE_PER_SEGMENT` and moves this constant from `vmm`
crate to `arch` crate.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
Currently, a tuple containing PCI space start address and PCI space
size is used to pass the PCI space information to the FDT creator.
In order to support the multiple PCI segment for FDT, more information
such as the PCI segment ID should be passed to the FDT creator. If we
still use a tuple to store these information, the code flexibility and
readablity will be harmed.
To address this issue, this commit replaces the tuple containing the
PCI space information to a structure `PciSpaceInfo` and uses a vector
of `PciSpaceInfo` to store PCI space information for each segment, so
that multiple PCI segment information can be passed to the FDT together.
Note that the scope of this commit will only contain the refactor of
original code, the actual multiple PCI segments support will be in
following series, and for now `--platform num_pci_segments` should only
be 1.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
Move the definition of MSI space to layout.rs, so other crates can
reference it. Now it is needed by virtio-iommu.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
Add a virtio-iommu node into FDT if iommu option is turned on. Now we
support only one virtio-iommu device.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
This commit implements the GIC (including both GICv3 and GICv3ITS)
Pausable trait. The pause of device manager will trigger a "pause"
of GIC, where we flush GIC pending tables and ITS tables to the
guest RAM.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
Based on `--memory-zone` and `--numa` param in the Cloud Hypervisor
cmdline, the NUMA memory configuration is described. This commit
adds such NUMA memory configuration to the FDT memory node.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
For the purpose of identification, each NUMA node is associated
with a unique token known as a `numa-node-id`. For the purpose of
device tree binding, a `numa-node-id` is a 32-bit integer.
The CPU node is associated with a NUMA node by the presence of a
`numa-node-id` property which contains the node id of the device.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
The optional device tree node distance-map describes the relative
distance (memory latency) between all NUMA nodes.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
The Arm CPU topology is defined within the `cpu-map` node, which is
a direct child of the cpus node and provides a container where the
actual topology nodes are listed.
This commit adds an optional cpu-map node in device tree, based on
the Cloud Hypervisor command line vCPU topology information.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
In an Arm system, the hierarchy of CPUs is defined through three
entities that are used to describe the layout of physical CPUs in
the system:
- cluster
- core
- thread
All these three entities have their own FDT node field. Therefore,
This commit adds an AArch64-specific helper to pass the config from
the Cloud Hypervisor command line to the `configure_system`, where
eventually the `create_fdt` is called.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
If GICR_CTLR is restored before GICR_PROPBASER and GICR_PENDBASER,
the restoring of the latter registers will fail, as the LPI enable
bit is already set in GICR_CTLR. Therefore, in this commit, the
order of restoring GICR registers is changed.
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
This commit implements the GicV3Its Snapshottable trait, including:
- GicV3Its state: GIC registers and ITS registers
- Save/restore logic of GicV3Its state
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
This commit implements two helper functions `gicv3_its_attr_access`
and `gicv3_its_tables_access` to access ITS device attributes and
ITS tables.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
In current code, the ITS device fd of GICv3 will be lost after the
creation of GIC. This commit adds a new `its_device` field for the
`GicV3Its` struct, which will be useful to save the ITS device fd.
This fd will be used in restoring the ITS device.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
UEFI need to be loaded to a flash area at the beginning of guest memory
address space. To simulate the flash, we take a piece of RAM and hide
it to the guest. As this is a temporary solution, the hiden RAM for UEFI
should be as little as possible. The size was 64 MiB, that's too much,
4 MiB is enough.
The down side of such simulation is that there is a gap (4 MiB) between
the memory size in VMM's view and that in guest's view. This is to be
fixed by implementing a flash device in future.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
Issue from beta verion of clippy:
Error: --> vm-virtio/src/queue.rs:700:59
|
700 | if let Some(used_event) = self.get_used_event(&mem) {
| ^^^^ help: change this to: `mem`
|
= note: `-D clippy::needless-borrow` implied by `-D warnings`
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_borrow
Signed-off-by: Bo Chen <chen.bo@intel.com>
To debug the FDT (Flattened Device Tree), we usually need to modify
source code to save the generted DTB data to disk, and use 'dtc' command
to decode the binary file into a text file to analyze.
It would be ideal if the FDT content can be seen in log.
This commit makes it real by:
- Introducing 'fdt' crate for parsing FDT.
- Printing the content of the FDT in tree view.
The parsing and printing only happen when Debug level logging enabled.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
Fixed wrong MPIDR value setting for VCPUs in FDT.
The wrong setting made only 16 VCPUs can be enabled at most, all other
VCPUs were showing off-line.
The issue was introduced when we were migrating FDT-generating code to
vmm-fdt crate.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
With the ability of getting host IPA size in `hypervisor` crate,
we can query the host IPA size through ioctl instead of hardcoding
a maximum IPA size. Therefore this commit removes the hardcoded
maximum host IPA size.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
EDK2 requires the beginning of PCIe high space above 4G address.
In CLH the space follows the RAM. If the RAM space is small, the PCIe
high space could fall bellow 4G.
Here we put it above 512G in FDT to workaround the EDK2 check only when
ACPI is enabled, because EDK2 collects PCIe information from FDT.
The address written in ACPI is not impacted.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
Implemented an architecture specific function for loading UEFI binary.
Changed the logic of loading kernel image:
1. First try to load the image as kernel in PE format;
2. If failed, try again to load it as formatless UEFI binary.
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
As the first step to complete live-migration with tracking dirty-pages
written by the VMM, this commit patches the dependent vm-memory crate to
the upstream version with the dirty-page-tracking capability. Most
changes are due to the updated `GuestMemoryMmap`, `GuestRegionMmap`, and
`MmapRegion` structs which are taking an additional generic type
parameter to specify what 'bitmap backend' is used.
The above changes should be transparent to the rest of the code base,
e.g. all unit/integration tests should pass without additional changes.
Signed-off-by: Bo Chen <chen.bo@intel.com>
The function used to calculate "gicr-typer" value has nothing with
DeviceManager. Now it is moved to AArch64 specific files.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
On FDT, VMM can allocate IRQ from 0 for devices.
But on ACPI, the lowest range below 32 has to be avoided.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
Before this change, the FDT was loaded at the end of RAM. The address of
FDT was not fixed.
While UEFI (edk2 now) requires fixed address to find FDT and RSDP.
Now the FDT is moved to the beginning of RAM, which is a fixed address.
RSDP is wrote to 2 MiB after FDT, also a fixed address.
Kernel comes 2 MiB after RSDP.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
For now, memory layout on arm64 is sparse and is conflict with uefi.
Here, we do some rearrangement to let it compact and compatible with
uefi support.
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
Simplify snapshot & restore code by using generics to specify helper
functions that take / make a Serialize / Deserialize struct
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Fixes the current codebase so that every cargo clippy can be run with
the beta toolchain without any error.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
error: name `GPIOInterruptDisabled` contains a capitalized acronym
Error: --> devices/src/legacy/gpio_pl061.rs:46:5
|
46 | GPIOInterruptDisabled,
| ^^^^^^^^^^^^^^^^^^^^^ help: consider making the acronym lowercase, except the initial letter: `GpioInterruptDisabled`
|
= note: `-D clippy::upper-case-acronyms` implied by `-D warnings`
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#upper_case_acronyms
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
error: name `RSDPPastRamEnd` contains a capitalized acronym
--> arch/src/lib.rs:59:5
|
59 | RSDPPastRamEnd,
| ^^^^^^^^^^^^^^ help: consider making the acronym lowercase, except the initial letter: `RsdpPastRamEnd`
|
= note: `-D clippy::upper-case-acronyms` implied by `-D warnings`
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#upper_case_acronyms
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
