Commit Graph

43 Commits

Author SHA1 Message Date
Sebastien Boeuf
b918220b49 vmm: Support virtio-pci devices attached to a virtual IOMMU
This commit is the glue between the virtio-pci devices attached to the
vIOMMU, and the IORT ACPI table exposing them to the guest as sitting
behind this vIOMMU.

An important thing is the trait implementation provided to the virtio
vrings for each device attached to the vIOMMU, as they need to perform
proper address translation before they can access the buffers.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2019-10-07 10:12:07 +02:00
Rob Bradford
833a3d456c pci, vmm: Expose the PCI bus for configuration via MMIO
Refactor the PCI datastructures to move the device ownership to a PciBus
struct. This PciBus struct can then be used by both a PciConfigIo and
PciConfigMmio in order to expose the configuration space via both IO
port and also via MMIO for PCI MMCONFIG.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2019-09-30 18:00:31 +01:00
Sebastien Boeuf
658c076eb2 linters: Fix clippy issues
Latest clippy version complains about our existing code for the
following reasons:

- trait objects without an explicit `dyn` are deprecated
- `...` range patterns are deprecated
- lint `clippy::const_static_lifetime` has been renamed to
  `clippy::redundant_static_lifetimes`
- unnecessary `unsafe` block
- unneeded return statement

All these issues have been fixed through this patch, and rustfmt has
been run to cleanup potential formatting errors due to those changes.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2019-08-15 09:10:04 -07:00
Samuel Ortiz
76e3a30c31 pci: Simplify PciDevice trait
We do not use the on_device_sandboxed() and
register_device_capabilities() methods.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2019-08-14 18:13:44 +02:00
Sebastien Boeuf
c0e2bbb23f pci: Add MSI-X helper to check if interrupts are enabled
In order to check if device's interrupts are enabled, this patch adds
a helper function to the MsixConfig structure so that at any point in
time we can check if an interrupt should be delivered or not.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2019-08-08 17:38:47 +01:00
Sebastien Boeuf
87195c9ccc pci: Fix vector control read/write from/to MSI-X table
The vector control offset is at the 4th byte of each MSI-X table entry.
For that reason, it is located at 0xc, and not 0x10 as implemented.

This commit fixes the current MSI-X code, allowing proper reading and
writing of each vector control register in the MSI-X table.

Fixes #156

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2019-08-08 08:10:18 +01:00
Sebastien Boeuf
846505d360 pci: Fix add_capability unit test
The structure provided to the add_capability() function should only
contain what comes after the capability ID and the next capability
pointer, which are located on the first WORD.

Because the structure TestCap included _vndr and _next fields, they
were directly set after the first WORD, while the assertion was
expecting to find the values of len and foo fields.

Fixes #105

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2019-08-03 08:43:44 +01:00
Rob Bradford
9caad7394d build, misc: Bump vmm-sys-util dependency
The structure of the vmm-sys-util crate has changed with lots of code
moving to submodules.

This change adjusts the use of the imported structs to reference the
submodules.

Fixes: #145

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2019-08-02 07:42:20 -07:00
Rob Bradford
ac950d9a97 build: Bulk update dependencies
Update all dependencies with "cargo upgrade" with the exception of
vmm-sys-utils which needs some extra porting work.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2019-08-02 15:22:37 +02:00
Sebastien Boeuf
a548a01423 pci: Fix MSI-X table and PBA offsets
The offsets returned by the table_offset() and pba_offset() function
were wrong as they were shifting the value by 3 bits. The MSI-X spec
defines the MSI-X table and PBA offsets as being defined on 3-31 bits,
but this does not mean it has to be shifted. Instead, the address is
still on 32 bits and assumes the LSB bits 0-2 are set to 0.

VFIO was working fine with devices were the MSI-X offset were 0x0, but
the bug was found on a device where the offset was non-null.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2019-08-02 09:45:20 +02:00
Sebastien Boeuf
d217089b54 pci: Add support for expansion ROM BAR
The expansion ROM BAR can be considered like a 32-bit memory BAR with a
slight difference regarding the amount of reserved bits at the beginning
of its 32-bit value. Bit 0 indicates if the BAR is enabled or disabled,
while bits 1-10 are reserved. The remaining upper 21 bits hold the BAR
address.

This commit extends the pci crate in order to support expansion ROM BAR.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2019-07-31 09:28:29 +02:00
Sebastien Boeuf
b6ae2ccda4 pci: Disable multiple functions
Every PCI device is exposed as a separate device, on a specific PCI
slot, and we explicitely don't support to expose a device as a multi
function device. For this reason, this patch makes sure the enumeration
of the PCI bus will not find some multi function device.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2019-07-31 09:28:29 +02:00
Sebastien Boeuf
927861ced2 pci: Fix end of address space check
The check performed on the end address was wrong since the end address
was actually the address right after the end. To get the right end
address, we need to add (region size - 1) to the start address.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2019-07-25 11:45:38 +01:00
Sebastien Boeuf
1268165040 pci: Allow for registering IO and Memory BAR
This patch adds the support for both IO and Memory BARs by expecting
the function allocate_bars() to identify the type of each BAR.
Based on the type, register_mapping() insert the address range on the
appropriate bus (PIO or MMIO).

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2019-07-22 09:50:10 -07:00
Sebastien Boeuf
b157181656 pci: Fix the way PCI configuration registers are being written
The way the function write_reg() was implemented, it was not keeping
the bits supposed to be read-only whenever the guest was writing to one
of those. That's why this commit takes care of protecting those bits,
preventing them from being updated.

The tricky part is about the BARs since we also need to handle the very
specific case where the BAR is being written with all 1's. In that case
we want to return the size of the BAR instead of its address.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2019-07-22 09:50:10 -07:00
Sebastien Boeuf
185b1082fb pci: Add a helper to set the BAR type
A BAR can be three different types: IO, 32 bits Memory, or 64 bits
Memory. The VMM needs a way to set the right type depending on its
needs.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2019-07-22 09:50:10 -07:00
Sebastien Boeuf
ee39e46568 pci: Add MSI capability structure
In order to support use cases that require MSI, the pci crate is
being expanded with the description of an MSI PCI capability
structure through the new MsiCap Rust structure.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2019-07-22 09:50:10 -07:00
Sebastien Boeuf
72007f016a pci: Improve MSI-X code to let VFIO rely on it
This commit enhances the current msi-x code hosted in the pci crate
in order to be reused by the vfio crate. Specifically, it creates
several useful methods for the MsixCap structure that can simplify
the caller's code.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2019-07-22 09:50:10 -07:00
Samuel Ortiz
29878956bd pci: Implement the From trait for the PciCapabilityID structure
This will be needed by the VFIO crate for managing MSI capabilities.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2019-07-22 09:50:10 -07:00
Rob Bradford
9a17871630 pci: Make unit tests compile
Another member was added to the configuration struct.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2019-07-16 17:09:05 +02:00
Rob Bradford
74d079f7da pci: Mark add_capability test as #[ignore] as it is currently failing
See #105

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2019-07-16 17:09:05 +02:00
Samuel Ortiz
2b2c31d206 pci: Use device PCI header type for our root bridge
The Bridge header type is really meant to be for PCI-to-PCI bridges.

Fixes: #85

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2019-07-10 09:53:02 +02:00
Jing Liu
2bb0b22cc1 pci: Refine pci topology
PciConfigIo is a legacy pci bus dispatcher, which manages all pci
devices including a pci root bridge. However, it is unnecessary to
design a complex hierarchy which redirects every access by PciRoot.

Since pci root bridge is also a pci device instance, and only contains
easy config space read/write, and PciConfigIo actually acts as a pci bus
to dispatch resource based resolving when VMExit, we re-arrange to make
the pci hierarchy clean.

Signed-off-by: Jing Liu <jing2.liu@linux.intel.com>
2019-07-09 10:01:18 +02:00
Samuel Ortiz
4605ecf1a8 pci: Extend the Device trait to carry the device BARs
When reading from or writing to a PCI BAR to handle a VM exit, we need
to have the BAR address itself to be able to support multiple BARs PCI
devices.

Fixes: #87

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2019-07-08 07:39:21 +02:00
Samuel Ortiz
8173e1ccd7 devices: Extend the Bus trait to carry the device range base
With the range base for the IO/MMIO vm exit address, a device with
multiple ranges has all the needed information for resolving which of
its range the exit is coming from

Fixes: #87

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2019-07-08 07:39:21 +02:00
Samuel Ortiz
0b7fb42a6c pci: Export network and mass storage sub classes
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2019-07-02 17:37:12 +02:00
Jing Liu
9da2343cb7 device: Improvement for BusDevice trait and PciDevice trait
BusDevice includes two methods which are only for PCI devices, which should
be as members of PciDevice trait for a better clean high level APIs.

Signed-off-by: Jing Liu <jing2.liu@linux.intel.com>
2019-06-25 06:17:30 -07:00
Sebastien Boeuf
4d98dcb077 msix: Handle MSI-X device masking
As mentioned in the PCI specification, the Function Mask from the
Message Control Register can be set to prevent a device from injecting
MSI-X messages. This supersedes the vector masking as it interacts at
the device level.

Here quoted from the specification:
For MSI and MSI-X, while a vector is masked, the function is prohibited
from sending the associated message, and the function must set the
associated Pending bit whenever the function would otherwise send the
message. When software unmasks a vector whose associated Pending bit is
set, the function must schedule sending the associated message, and
clear the Pending bit as soon as the message has been sent. Note that
clearing the MSI-X Function Mask bit may result in many messages
needing to be sent.

This commit implements the behavior described above by reorganizing
the way the PCI configuration space is being written. It is indeed
important to be able to catch a change in the Message Control
Register without having to implement it for every PciDevice
implementation. Instead, the PciConfiguration has been modified to
take care of handling any update made to this register.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2019-06-07 13:33:53 +01:00
Sebastien Boeuf
d810c7712d msix: Handle MSI-X vector masking
The current MSI-X implementation completely ignores the values found
in the Vector Control register related to a specific vector, and never
updates the Pending Bit Array.

According to the PCI specification, MSI-X vectors can be masked
through the Vector Control register on bit 0. If this bit is set,
the device should not inject any MSI message. When the device
runs into such situation, it must not inject the interrupt, but
instead it must update the bit corresponding to the vector number
in the Pending Bit Array.

Later on, if/when the Vector Control register is updated, and if
the bit 0 is flipped from 0 to 1, the device must look into the PBA
to find out if there was a pending interrupt for this specific
vector. If that's the case, an MSI message is injected and the
bit from the PBA is cleared.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2019-06-07 13:33:53 +01:00
Sebastien Boeuf
edd1279609 pci: Allow QWORD read and write to MSI-X table
As mentioned in the PCI specification, MSI-X table supports both
DWORD and QWORD accesses:

For all accesses to MSI-X Table and MSI-X PBA fields, software must
use aligned full DWORD or aligned full QWORD transactions; otherwise,
the result is undefined.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2019-06-07 13:33:53 +01:00
Sebastien Boeuf
00cdbbc673 pci: Make MSI-X PBA read only
Relying on the PCI specification, the Pending Bit Array is read only.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2019-06-07 13:33:53 +01:00
Sebastien Boeuf
47a4065aaf interrupt: Use a single closure to describe pin based and MSI-X
In order to factorize the complexity brought by closures, this commit
merges IrqClosure and MsixClosure into a generic InterruptDelivery one.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2019-06-06 15:27:35 +01:00
Sebastien Boeuf
8df05b72dc vmm: Add MSI-X support to virtio-pci devices
In order to allow virtio-pci devices to use MSI-X messages instead
of legacy pin based interrupts, this patch implements the MSI-X
support for cloud-hypervisor. The VMM code and virtio-pci bits have
been modified based on the "msix" module previously added to the pci
crate.

Fixes #12

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2019-06-06 15:27:35 +01:00
Sebastien Boeuf
13a065d2cd dep: Rely on latest kvm-ioctls crate
In order to have access to the newly added signal_msi() function
from the kvm-ioctls crate, this commit updates the version of the
kvm-ioctls to the latest one.

Because set_user_memory_region() has been swtiched to "unsafe", we
also need to handle this small change in our cloud-hypervisor code
directly.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2019-06-06 15:27:35 +01:00
Sebastien Boeuf
4b53dc4921 pci: Add MSI-X implementation
In order to support MSI-X, this commit adds to the pci crate a new
module called "msix". This module brings all the necessary pieces
to let any PCI device implement MSI-X support.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2019-06-06 15:27:35 +01:00
Sebastien Boeuf
d3c7b45542 interrupt: Make IRQ delivery generic
Because we cannot always assume the irq fd will be the way to send
an IRQ to the guest, this means we cannot make the assumption that
every virtio device implementation should expect an EventFd to
trigger an IRQ.

This commit organizes the code related to virtio devices so that it
now expects a Rust closure instead of a known EventFd. This lets the
caller decide what should be done whenever a device needs to trigger
an interrupt to the guest.

The closure will allow for other type of interrupt mechanism such as
MSI to be implemented. From the device perspective, it could be a
pin based interrupt or an MSI, it does not matter since the device
will simply call into the provided callback, passing the appropriate
Queue as a reference. This design keeps the device model generic.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2019-06-06 15:27:35 +01:00
Samuel Ortiz
a6b7715f4b vendor: Move to the rust-vmm vmm-sys-util package
Locked to 60fe35be but no longer dependent on liujing2 repo.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2019-06-04 17:51:52 +02:00
Samuel Ortiz
9299502955 cloud-hypervisor: Switch to crates.io kvm-ioctls
Fixes: #15

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2019-05-15 05:59:08 +01:00
Samuel Ortiz
ac328df87c cloud-hypervisor: Switch to the vmm-sys-util pending PR branch
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2019-05-10 16:32:39 +02:00
Rob Bradford
4b58eb4867 pci: configuration: Fix rustfmt issue
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2019-05-10 16:32:39 +02:00
Samuel Ortiz
040ea5432d cloud-hypervisor: Add proper licensing
Add the BSD and Apache license.
Make all crosvm references point to the BSD license.
Add the right copyrights and identifier to our VMM code.
Add Intel copyright to the vm-virtio and pci crates.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2019-05-09 15:44:17 +02:00
Sebastien Boeuf
b67e0b3dad vmm: Use virtio-blk to support booting from disk image
After the virtio-blk device support has been introduced in the
previous commit, the vmm need to rely on this new device to boot
from disk images instead of initrd built into the kernel.

In order to achieve the proper support of virtio-blk, this commit
had to handle a few things:

  - Register an ioevent fd for each virtqueue. This important to be
    notified from the virtio driver that something has been written
    on the queue.

  - Fix the retrieval of 64bits BAR address. This is needed to provide
    the right address which need to be registered as the notification
    address from the virtio driver.

  - Fix the write_bar and read_bar functions. They were both assuming
    to be provided with an address, from which they were trying to
    find the associated offset. But the reality is that the offset is
    directly provided by the Bus layer.

  - Register a new virtio-blk device as a virtio-pci device from the
    vm.rs code. When the VM is started, it expects a block device to
    be created, using this block device as the VM rootfs.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2019-05-08 08:55:09 +02:00
Samuel Ortiz
e8308dd13b pci: Add minimal PCI host emulation crate
This crate is based on the crosvm devices/src/pci implementation from 107edb3e
We introduced a few changes:

- This one is a standalone crate. The device crate does not carry any
  PCI specific bits.
- Simplified PCI root configuration. We only carry a pointer to a
  PciConfiguration, not a wrapper around it.
- Simplified BAR allocation API. All BARs from the PciDevice instance
  must be generated at once through the PciDevice.allocate_bars()
  method.
- The PCI BARs are added to the MMIO bus from the PciRoot add_device()
  method.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2019-05-08 08:55:06 +02:00