The Token Bucket fields are, on the Cloud Hypervisor side, u64.
However, we expose those as int64 in the OpenAPI YAML file.
With that in mind, let's adjust the yaml file to expose those as uint64.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
This means that the automatic enabling of the virtio-iommu will also be
applied to VMs creates via the API as well as the CLI.
Fixes: #4016
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Improve the request parsing/handling code by allowing an error status to
be returned back to the guest driver before we return an error
internally.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Extend the Domain structure to store the information about each domain
being in bypass mode or not. Based on this new information, the address
translation of the virtio devices is performed according to the bypass
mode of each domain. And both MAP/UNMAP requests are generating errors
in case the domain has been previously set to bypass mode.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In anticipation for associating more than mappings with a domain, we
factorize the list of mappings associated with a domain behind a
dedicated Domain structure. We also update the field name so that it
reads better in the code.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Exposing the VIRTIO_IOMMU_F_BYPASS_CONFIG feature to the guest, which
allows to update the bypass global knob through virtio configuration.
Based on the value of this global knob, the address translations for
endpoints that have not been added to a domain is allowed with a simple
identity mapping.
By default, we enable the bypass mode for all endpoints that are not
attached to any domain.
Fixes#3987
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Based on the VIRTIO specification, we must be able to support multiple
endpoints per domain. This is fixed along with the introduction of some
simplification regarding how we can retrieve the external mapping
directly based on the endpoint.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
If using the ACPI based hotplug only memory can be added so if the
hotplug RAM size is the same as the boot RAM size then do not include
the memory manager DSDT entries.
Also: this change simplifies the code marginally by making the
HotplugMethod enum Copyable.
This was identified from the following perf output:
1.78% 0.00% vmm cloud-hypervisor [.] <vmm::memory_manager::MemorySlots as acpi_tables::aml::Aml>::append_aml_bytes
|
---<vmm::memory_manager::MemorySlots as acpi_tables::aml::Aml>::append_aml_bytes
<vmm::memory_manager::MemorySlot as acpi_tables::aml::Aml>::append_aml_bytes
acpi_tables::aml::Name::new
<acpi_tables::aml::Path as acpi_tables::aml::Aml>::append_aml_bytes
__libc_malloc
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
No further changes are necessary that adding a #[derive(Error)] as there
is a manual implementation of Display.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Extend VfioCommon to simplify the overall code, and also in preparation
for supporting the restore code path.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Extend VfioCommon structure to own the legacy interrupt manager. This
will be useful for implementing the restore code path.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Extend VfioCommon structure to own the MSI interrupt manager. This will
be useful for implementing the restore code path.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
We need to split the parsing functions into one function dedicated to
the actual parsing and a second function for initializing the interrupt
type. This will be useful on the restore path as the parsing won't be
needed.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Adding support for snapshot and restore to the MsiConfig structure, as
it will be needed part of VFIO migration.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This carries a string that is exposed via DMI/SMBIOS and is particularly
useful for cloud-init initialisation.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This is particularly helpful as the cloud-init DMI serial number
encoding scheme uses "=" and ";" for key value pairs.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
If the guest has not activated the virtio-mem device then reject an
attempt to resize using it.
Fixes: #4001
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Live upgrade is currently not guaranteed during this development cycle
and we will try to enable these tests after the next release.
Signed-off-by: Bo Chen <chen.bo@intel.com>
By augmenting existing set of tests, this patch added a set of
tests for live-upgrade that covers use cases with NUMA,
vhost-user (OVS-DPDK), and local-migration.
Fixes: #3949
Signed-off-by: Bo Chen <chen.bo@intel.com>
Use a single enum member for representing errors from the internal API.
This avoids the ugly duplication of the API call name in the error
message:
e.g.
$ target/debug/ch-remote --api-socket /tmp/api resize --cpus 2
Error running command: Server responded with an error: InternalServerError: VmResize(VmResize(CpuManager(DesiredVCpuCountExceedsMax)))
Becomes:
$ target/debug/ch-remote --api-socket /tmp/api resize --cpus 2
Error running command: Server responded with an error: InternalServerError: ApiError(VmResize(CpuManager(DesiredVCpuCountExceedsMax)))
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
In case a list of resources is provided to allocate_bars(), it directly
means we're restoring some existing BARs. That's why we shouldn't share
the codepath that creates BARs from scratch as we don't need to interact
with the device to retrieve the information.
Whenever resources are provided, we simply iterate over the list of
possible BAR indexes and create the BARs if the resource could be found.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Instead of defining some very generic resources as PioAddressRange or
MmioAddressRange for each PCI BAR, let's move to the new Resource type
PciBar in order to make things clearer. This allows the code for being
more readable, but also removes the need for hard assumptions about the
MMIO and PIO ranges. PioAddressRange and MmioAddressRange types can be
used to describe everything except PCI BARs. BARs are very special as
they can be relocated and have special information we want to carry
along with them.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In order to make the code more consistent and easier to read, we remove
the former tuple that was used to describe a BAR, replacing it with the
existing structure PciBarConfiguration.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The code was quite unclear regarding the type of index that was being
used regarding a BAR. This is improved by differenciating register
indexes and BAR indexes more clearly.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
By factorizing the algorithm untangling TDVF sections from guest RAM
into a dedicated function, we can write some unit tests to validate it
properly achieves what we expect.
Adding the "tdx" feature to the unit tests, otherwise it wouldn't get
tested.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The I/O operations knobs are prefixed `ops_` rather than `bw_`, as `bw_`
refers to the "bandwidth" knobs.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
