error: the item `io` is imported redundantly
Error: --> devices/src/legacy/uart_pl011.rs:468:9
|
467 | use super::*;
| -------- the item `io` is already imported here
468 | use std::io;
| ^^^^^^^
error: the item `Arc` is imported redundantly
Error: --> devices/src/legacy/uart_pl011.rs:469:21
|
467 | use super::*;
| -------- the item `Arc` is already imported here
468 | use std::io;
469 | use std::sync::{Arc, Mutex};
| ^^^
error: could not compile `devices` (lib test) due to 8 previous errors
Error: warning: build failed, waiting for other jobs to finish...
Error: The process 'cross' failed with exit code 101
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
error: the item `read_le_u32` is imported redundantly
Error: --> devices/src/legacy/gpio_pl061.rs:342:17
|
341 | use super::*;
| -------- the item `read_le_u32` is already imported here
342 | use crate::{read_le_u32, write_le_u32};
| ^^^^^^^^^^^
|
= note: `-D unused-imports` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(unused_imports)]`
error: the item `write_le_u32` is imported redundantly
Error: --> devices/src/legacy/gpio_pl061.rs:342:30
|
341 | use super::*;
| -------- the item `write_le_u32` is already imported here
342 | use crate::{read_le_u32, write_le_u32};
| ^^^^^^^^^^^^
error: the item `Arc` is imported redundantly
Error: --> devices/src/legacy/gpio_pl061.rs:343:9
|
341 | use super::*;
| -------- the item `Arc` is already imported here
342 | use crate::{read_le_u32, write_le_u32};
343 | use std::sync::Arc;
| ^^^^^^^^^^^^^^
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
warning: assigning the result of `Clone::clone()` may be inefficient
--> devices/src/pvpanic.rs:213:9
|
213 | self.bar_regions = bars.clone();
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: use `clone_from()`: `self.bar_regions.clone_from(&bars)`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#assigning_clones
= note: `#[warn(clippy::assigning_clones)]` on by default
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
With the nightly toolchain (2024-02-18) cargo check will flag up
redundant imports either because they are pulled in by the prelude on
earlier match.
Remove those redundant imports.
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
This commit adds the debug-console (or debugcon) device to CHV. It is a
very simple device on I/O port 0xe9 supported by QEMU and BOCHS. It is
meant for printing information as easy as possible, without any
necessary configuration from the guest at all.
It is primarily interesting to OS/kernel and firmware developers as they
can produce output as soon as the guest starts without any configuration
of a serial device or similar. Furthermore, a kernel hacker might use
this device for information of type B whereas information of type A are
printed to the serial device.
This device is not used by default by Linux, Windows, or any other
"real" OS, but only by toy kernels and during firmware development.
In the CLI, it can be configured similar to --console or --serial with
the --debug-console parameter.
Signed-off-by: Philipp Schuster <philipp.schuster@cyberus-technology.de>
Cloud-Hypervisor takes a path for Unix socket, where it will listen
on. Users can connect to the other end of the socket and access serial
port on the guest.
"--serial socket=/path/to/socket" is the cmdline option to pass to
cloud-hypervisor.
Users can use socat like below to access guest's serial port once the
guest starts to boot:
socat -,crnl UNIX-CONNECT:/path/to/socket
Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com>
This fixes all typos found by the typos utility with respect to the config file.
Signed-off-by: Philipp Schuster <philipp.schuster@cyberus-technology.de>
There is no need for this struct to be public and since it is used in
this module the #[allow(dead_code)] invocation can be removed.
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
With the addition of the spinning waiting for the exit event to be
received in the CMOS device a regression was introduced into the CMOS
fuzzer. Since there is nothing to receive the event in the fuzzer and
there is nothing to update the bit the that the device is looping on;
introducing an infinite loop.
Use an Option<> type so that when running the device in the fuzzer no
Arc<AtomicBool> is provided effectively disabling the spinning logic.
Fixes: https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=61165
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
The reset system is asynchronous with an I/O event (PIO or MMIO) for
ACPI/i8042/CMOS triggering a write to the reset_evt event handler. The
VMM thread will pick up this event on the VMM main loop and then trigger
a shutdown in the CpuManager. However since there is some delay between
the CPU threads being marked to be killed (through the
CpuManager::cpus_kill_signalled bool) it is possible for the guest vCPU
that triggered the exit to be re-entered when the vCPU KVM_RUN is called
after the I/O exit is completed.
This is undesirable and in particular the Linux kernel will attempt to
jump to real mode after a CMOS based exit - this is unsupported in
nested KVM on AMD on Azure and will trigger an error in KVM_RUN.
Solve this problem by spinning in the device that has triggered the
reset until the vcpus_kill_signalled boolean has been updated
indicating that the VMM thread has received the event and called
CpuManager::shutdown(). In particular if this bool is set then the vCPU
threads will not re-enter the guest.
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
Split interrupt source group restore into two steps, first restore
the irqfd for each interrupt source entry, and second restore the
GSI routing of the entire interrupt source group.
This patch will reduce restore latency of interrupt source group,
and in a 200-concurrent restore test, the patch reduced the
average IOAPIC restore time from 15ms to 1ms.
Signed-off-by: Yong He <alexyonghe@tencent.com>
Implemetion of BusDevice and PciDevice trait for pvpanic device.
Pvpanic device can be implemented as an ISA device or as a
PCI device, we choose PCI device for now.
Signed-off-by: Yi Wang <foxywang@tencent.com>
Introduce emulation of pvpanic device to allow cloud hypervisor to get
the notify from guest's pvpanic driver when guest kernel crash.
Signed-off-by: Yi Wang <foxywang@tencent.com>
Significant API changes have occured, most significantly is the switch
to an approach which does not require vm-memory and can run no_std.
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
The information about the identifier related to a Snapshot is only
relevant from the BTreeMap perspective, which is why we can get rid of
the duplicated identifier in every Snapshot structure.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The snapshot and restore of AArch64 Gic was done in Vm. Now it is moved
to DeviceManager.
The benefit is that the restore can be done while the Gic is created in
DeviceManager.
While the moving of state data from Vm snapshot to DeviceManager
snapshot breaks the compatability of migration from older versions.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
Moving the Ioapic object to the new restore design, meaning the Ioapic
is created directly with the right state, and it shares the same
codepath as when it's created from scratch.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In the new process, `device::Gic::new()` covers additional actions:
1. Creating `hypervisor::vGic`
2. Initializing interrupt routings
The change makes the vGic device ready in the beginning of
`DeviceManager::create_devices()`. This can unblock the GIC related
devices initialization in the `DeviceManager`.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
This device emulates a tpm device in cloud-hypervisor. Read and write support
to miminal set of control registers is supported.
Non-control commands will be processed as reads and write to
CRB_DATA_BUFFER. Reads and Writes to this data buffer are forwarded to
swtpm via the configured data_fd.
Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com>
Co-authored-by: Sean Yoo <t-seanyoo@microsoft.com>
This simplifes the buld and checks with very little overhead and the
fwdebug device is I/O port device on 0x402 that can be used by edk2 as a
very simple character device.
See: #4679
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This makes it consistent with x86_64 and allows the performance metrics
tooling to continue to work on aarch64.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Rather than overloading the GED device with the detection of what the
underlying event means move that to a new generic event controller. The
advantage of this is that that the generic event controller can have a
_CRS that covers the memory for the OperationRegion (the ged driver
rejects _CRS entries that contain anything beyond the single interrupt)
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Use VgicConfig to initialize Vgic.
Use Gic::create_default_config everywhere so we don't always recompute
redist/msi registers.
Add a helper create_test_vgic_config for tests in hypervisor crate.
Signed-off-by: Nuno Das Neves <nudasnev@microsoft.com>
VgicConfig structure will be used for initializing the Vgic.
Gic::create_default_config will be used everywhere we currently compute
redist/msi registers.
Signed-off-by: Nuno Das Neves <nudasnev@microsoft.com>
