Since libvirt-guests script/service can operate on various URIs and we do
support both socket activation and traditional services, the ordering should be
specified for all the possible sockets and services.
Also remove the Wants= dependency since do not want to start any service. We
cannot know which one libvirt-guests is configured, so we'd have to start all
the daemons which would break if unused colliding services are not
masked (libvirtd.service in the modular case and all the modular daemon service
units in the monolithic scenario). Fortunately we can assume that the system is
configured properly to start services/sockets that are of interest to the user.
That also works with the setup described in https://libvirt.org/daemons.html .
To make it even more robust we add the daemon service into the machine units
created for individual domains as it was missing there.
https://bugzilla.redhat.com/show_bug.cgi?id=1868537
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Extend domdirtyrate-calc virsh api with mode option, either
of these three options "page-sampling,dirty-bitmap,dirty-ring"
can be specified when calculating dirty page rate.
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Calculate the length of the FD list beforehand to avoid multiple
expansions and mainly simplify the code and use automatic freeing to
remove the error code path.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Adding an exception for the whole file usually defeats the purpose of a
syntax check and is also likely to get forgotten once the file is
removed.
In case of the suggestion of using 'safewrite' instead of write even the
comment for safewrite states that the function needs to be used only in
certain cases.
Remove the blanket exceptions for files and use an exclude string
instead. The only instance where we keep the full file exception is for
src/libvirt-stream.c as there are multiple uses in example code in
comments where I couldn't find a nicer targetted wapproach.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This wires up support for resetting NVRAM for all APIs that allow
this feature.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This change was generated using the following spatch:
@ rule1 @
expression a;
identifier f;
@@
<...
- f(*a);
... when != a;
- *a = NULL;
+ g_clear_pointer(a, f);
...>
@ rule2 @
expression a;
identifier f;
@@
<...
- f(a);
... when != a;
- a = NULL;
+ g_clear_pointer(&a, f);
...>
Then, I left some of the changes out, like tools/nss/ (which
doesn't link with glib) and put back a comment in
qemuBlockJobProcessEventCompletedActiveCommit() which coccinelle
decided to remove (I have no idea why).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We already exit if they are not present.
Report an error, but do not mark them as required in case a future
version of this command will want to accept a different set of
parameters.
https://bugzilla.redhat.com/show_bug.cgi?id=2046024
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
They way our VIR_ENUM_IMPL() and virXXXTypeFromString() work is
that for any string that's not recognized a negative one is
returned. And, since VIR_XXX_LAST is passed to VIR_ENUM_IMPL() we
can be sure that all enum members are covered. Therefore, there
is no way that virXXXTypeFromString() can return a value that's
bigger or equal to VIR_XXX_LAST.
I've noticed two places where such comparison was made, both in
cmdNetworkUpdate(). Drop them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
sysconfig files are owned by the admin of the host. They have the
liberty to put anything they want into these files. This makes it
difficult to provide different built-in defaults.
Remove the sysconfig file and place the current desired default into
the service file.
Local customizations can now go either into /etc/sysconfig/name
or /etc/systemd/system/name.service.d/my-knobs.conf
Attempt to handle upgrades in libvirt.spec.
Dirty files which are marked as %config will be renamed to file.rpmsave.
To restore them automatically, move stale .rpmsave files away, and
catch any new rpmsave files in %posttrans.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
libvirt-guests was already moved to the libvirt daemon package in commit
d800c50349. It only needs to be installed when building libvirtd.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
There are few places where a cleanup label contains nothing but a
return statement. Drop such labels and return directly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After attesting a domain with the help of domlaunchsecinfo,
domsetlaunchsecstate can be used to set a secret in the guest
domain's memory prior to running the vcpus.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Commit 93e9e92c1e eliminated the option for skipping but left code in
the s390 check which makes use of a skip. This leads to an output
without result destroying the correct format. e.g.
QEMU: Checking for hardware virtualization : PASS
QEMU: Checking if device /dev/kvm exists : PASS
QEMU: Checking if device /dev/kvm is accessible : PASS
QEMU: Checking if device /dev/vhost-net exists : PASS
QEMU: Checking if device /dev/net/tun exists : PASS
QEMU: Checking for cgroup 'cpu' controller support : PASS
QEMU: Checking for cgroup 'cpuacct' controller support : PASS
QEMU: Checking for cgroup 'cpuset' controller support : PASS
QEMU: Checking for cgroup 'memory' controller support : PASS
QEMU: Checking for cgroup 'devices' controller support : PASS
QEMU: Checking for cgroup 'blkio' controller support : PASS
QEMU: Checking for device assignment IOMMU support : QEMU: Checking for secure guest support : PASS
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There are two functions that take variable arguments:
vshTableNew() and vshTableRowAppend(). Both expect the list of
arguments to be NULL terminated. Annotate them with
G_GNUC_NULL_TERMINATED to enable compile time check for this.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use modern style of function declarations where the return type
and function name are on two separate lines.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There's no need for any caller to know vshTableRow typedef.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The completer is trivial, just iterate over
virDomainNumatuneMemMode enum and convert each integer into its
string comrade.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The admin module is very closely tied to RPC. If we are
building without RPC support there's not much use for the
admin module, in fact it fails to build.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While some SEV info is reported in the domain capabilities,
for reasons of size, this excludes the certificates. The
nodesevinfo command provides the full set of information.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This command reports the launch security parameters for
a guest, allowing an external tool to perform a launch
attestation.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
shared_module() is intended for shared objects that are
loaded at runtime using dlopen() whereas NSS plugins need to
be full-fledged shared libraries with, among other things, a
proper SONAME.
Meson seems to have become more strict about this recently,
because libnss_libvirt.so.2 gets a SONAME when I build it with
Meson 0.59.4 on Fedora 34 but doesn't when I use Meson 0.60.2
on Debian testing instead.
Either way, shared_library() was always the right function
to use for NSS plugins.
Fixes: 36780c9319
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use automatic memory freeing for the temporary bitmap and remove the
pointless 'cleanup' section.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Non-shared storage migration of guests which are disk I/O intensive and
have fast local storage may actually never converge if the guest happens
to dirty the disk faster than it can be copied.
This patch introduces a new flag
'VIR_MIGRATE_NON_SHARED_SYNCHRONOUS_WRITES' which will instruct
hypervisors to synchronize local I/O writes with the writes to remote
storage used for migration so that the guest can't overwhelm the
migration. This comes at a cost of decreased local I/O performance for
guests which behave well on average.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In cases when the destination storage is slower than the normal VM
storage and the VM does intensive I/O to the disk a block copy job may
never converge.
Switching it to synchronous mode will ensure that all writes done by the
guest are propagated to the destination at the cost of slowing down I/O
of the guest to the synchronous speed.
This patch adds the new API flag and implements virsh support.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The libvirt_recover_xattrs.sh tool hangs when run. When no flags
are provided OPTIND is 1, so the loop expands to 'shift 0' which
has not effect. Rewrite to just loop over $@ instead which involves
less cleverness.
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In the dissect_xdr_bytes() there's a comment that the string
allocated by xdr_bytes() can't be freed using xdr_free(). Well,
that is expected because xdr_bytes() used plain calloc() AND the
string is not an XDR struct but plain 'char *' type. Passing it
to xdr_free() must result in weird things happening.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
When the dissector sees a byte sequence that is either an opaque
data (xdr_opaque) or a byte sequence (xdr_bytes) it formats the
bytes as a hex numbers using our own implementation. But
wireshark already provides a function for it: tvb_bytes_to_str().
NB, the reason why it returns a const string is so that callers
don't try to free it - the string is allocated using an allocator
which will decide when to free it.
The wireshark formatter was introduced in wireshark commit of
v1.99.2~479 and thus is present in the version we require at
least (2.6.0).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
virHostValidateGetCPUFlags returns an allocated virBitmap and
it needs to be freed.
Fixes: a0ec7165e3
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Kristína Hanicová <khanicov@redhat.com>
Trying to connect once without a polkit agent will generate an error on the
server side which seems too rough given it only serves the purpose of the client
(virsh in this case) to figure out that an agent is needed. Thankfully we can
just try running the agent. It does not break anything as we are running it
with `--fallback`, which makes sure it does not replace an existing agent in
case there is one already registered.
The second piece of code trying to start the polkit text agent is kept in order
to _really_ try out starting the agent (and error out when failing to do so)
just in case the agent was not available the first time it was ran. Even though
it should not happen it avoids a very rare race condition and really does not
add much complexity.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1945501
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It only redundantly reflects whether pkagent != NULL.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In some cases we have a label that contains nothing but a return
statement. The amount of such labels rises as we use automagic
cleanup. Anyway, such labels are pointless and can be dropped.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
virJSONValueObjectAdd now works identically to virJSONValueObjectCreate
when used with a NULL argument. Replace all callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In a few cases we call a public API, wrapped in an if() statement
with both branches written out explicitly. The error branch jumps
onto cleanup label, while the successful prints out a message.
Right after these ifs there's 'ret = true;' and the cleanup
label. The code is a bit more readable if only the error branch
is kept and printing happens at the same level as setting the ret
variable.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Kristína Hanicová <khanicov@redhat.com>
With this program we do not have to depend on the output of `certtool -i`, which
changed the order of the fields at some point and the newest version is
incompatible with what libvirt expects in tls_allowed_dn_list configuration
option.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
There are a few cases where a string list is freed by an explicit
call of g_strfreev(), but the same result can be achieved by
g_atuo(GStrv).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
The new parameter group returns information about network interfaces
Signed-off-by: zhanglei <zhanglei@smartx.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
When you set metadata with type element like the following:
dom.setMetadata(libvirt.VIR_DOMAIN_METADATA_ELEMENT, "<test/>", 'abc', "HAHAH", 0)
Then for `virsh event --all`, then it will output this message:
event 'metadata-change' for domain 'rhel9': element HAHAH
The message is ambiguous since it looks like the params for
metadata-change event is the element HAHAH. Actually that means the type is
element while the url is HAHAH. Let's make it more clear.
Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
* XML serialization and deserialization of PCI VPD;
* PCI VPD capability flags added and used in relevant places;
* XML to XML tests for the added capability.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dmitrii Shcherbakov <dmitrii.shcherbakov@canonical.com>
Issuing simple QMP commands is pain as they need to be wrapped by the
JSON wrapper:
{ "execute": "COMMAND" }
and optionally also:
{ "execute": "COMMAND", "arguments":...}
For simple commands without arguments we can add syntax sugar to virsh
which allows simple usage of QMP and additionally prepares also for
passing through of the 'arguments' section:
virsh qemu-monitor-command $VM query-status
is equivalent to
virsh qemu-monitor-command $VM '{"execute":"query-status"}'
and
virsh qemu-monitor-command $VM query-named-block-nodes '{"flat":true}'
or
virsh qemu-monitor-command $VM query-named-block-nodes '"flat":true'
is equivalent to
virsh qemu-monitor-command $VM '{"execute":"query-named-block-nodes", "arguments":{"flat":true}}'
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virt-host-validate checks if AMD SEV is enabled by verifying
/sys/module/kvm_amd/parameters/sev is set to '1'. On a system
running kernel 5.13, the parameter is reported as 'Y'. To be
extra paranoid, add a check for 'y' along with 'Y' to complement
the existing check for '1'.
Fixes: https://bugzilla.opensuse.org/show_bug.cgi?id=1188715
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
There are few places where we can replace explicit
VIR_FORCE_CLOSE() with VIR_AUTOCLOSE annotation.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
Similarly to virshDomainFree add a wrapper for the snapshot object
freeing function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
Similarly to virshDomainFree add a wrapper for the snapshot object
freeing function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
Similarly to virshDomainFree add a wrapper for the snapshot object
freeing function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
Similarly to virshDomainFree add a wrapper for the snapshot object
freeing function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
Similarly to virshDomainFree add a wrapper for the snapshot object
freeing function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
Similarly to virshDomainFree add a wrapper for the snapshot object
freeing function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
Similarly to virshDomainFree add a wrapper for the snapshot object
freeing function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
Currently the order of virshXXXFree functions in the header file
does not correspond to the order in the corresponding .c file.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Jonathon Jongsma <jjongsma@redhat.com>
The --nvram and --keep-nvram options of the undefine command can
be used regardless of the domain status (the only consumer so far
- qemuDomainUndefineFlags() doesn't care about the domain
status). Yet, their corresponding help strings say something
about inactive domains while manpage says nothing. Remove the
reference to domain state.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2007659
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
New 'update-memory-device' command is introduced which aims on
making it user friendly to change <memory/> device. So far I just
need to change <requested/> so I'm introducing --requested-size
only; but the idea is that this is extensible for other cases
too. For instance, want to change <myElement/>? A new
--my-element argument can be easily introduced.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As advertised in previous commit, this event is delivered to us
when virtio-mem module changes the allocation inside the guest.
It comes with one attribute - size - which holds the new size of
the virtio-mem (well, allocated size), in bytes.
Mind you, this is not necessarily the same number as 'requested
size'. It almost certainly will be when sizing the memory up, but
it might not be when sizing the memory down - the guest kernel
might be unable to free some blocks.
This current size is reported in the domain XML as an output
element only.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
I removed else branches after return/break as they are not
necessary and the code looks cleaner without them.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch also includes use of an early return in case of an
error. I think the changes make the functions more readable.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If there was added a new return value indicating success to the
function virDomainMigrateSetMaxDowntime() in the future, because
of the way the function is called it would be treated it as an
error state and would return false (indicating failure). This
patch fixes it, so that the call of the function follows the same
pattern as is currently set in libvirt.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Both function description and function itself mention check for
OOM which can't happen really. There was a bug in glib where
g_strdup_*() might have not aborted on OOM, but we have our own
implementation when dealing with broken glib (see
vir_g_strdup_printf()). Therefore, checking for OOM is redundant
and can never be true.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Let's check whether a boolean --option doesn't have completer or
completer_flags set. These options are just flags and don't
accept any value, thus they can't have any completer.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If a command is an alias, then it can only have .name, .flags and
.alias set and .flags should contain just VSH_CMD_FLAG_ALIAS.
Check if that's the case in self-test.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The vol-download command takes mandatory --file argument which
points to a local (possibly non-existent) path. If the file
exists then it's overwritten. Set the argument's completer so
that self-test doesn't report it as missing.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The screenshot command takes optional --file argument which can
point to an existing local path (in which case the file is
overwritten). Set the argument's completer so that self-test
doesn't report it as missing.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch includes:
* removal of dead code
* simplifying nested if conditions
* removal of unnecessary variables
* usage of "direct" boolean return
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It's now also used in vshCompleteHelpCommand which is outside of the
conditionally compiled code.
Fixes: 80f70c74a7
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Complete with the indexed targets (e.g. vda[3]) based on existing
indexes.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
For now this serves just as an annotation because readline and also the
bash completion script insist on completing local paths when an empty
list is returned.
This will serve for future reference once we'll be able to properly
refuse to suggest anything.
The completer is used for fields such as names for new objects,
description strings, password strings etc, URIs and hostnames which we
can't feasibly autocomplete.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
For now the completion does the correct thing of completing a local path
if NULL is returned.
Introduce 'virshCompletePathLocalExisting' and use it in the
'VIRSH_COMMON_OPT_FILE' macro.
This for now serves as an annotation for the function which want to read
a file on the host running virsh. In the future this can be used with a
more sophisticated implementation.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In cases such as the APIs for managed save management, the file path
provided via the '--file' option is passed to the API.
We'll need to make them distinct from cases for when virsh is using the
file so that different completers can be used.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
'--storage' of the 'undefine' command and '--migrate-disks' of the
'migrate' command take a list of disk targets as an argument.
We can simply combine 'virshDomainDiskTargetCompleter' with
'virshCommaStringListComplete' to provide the completions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Wrap 'vshReadlineCommandGenerator' into a function with proper prototype
to provide a completer for the help command.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
'--pool' of the 'pool-event' command and '--inputpool' of
'vol-create-from' use the above mentioned completer.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When listing a snapshot tree, the '--from' option takes a name of a
snapshot to limit the subset. Use virshSnapshotNameCompleter as
completer for the option.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Make it simple to spot which options of which commands are missing
autocompletion functions by introducing this hidden option.
In the future when we'll have completers for everything this can be also
used as a hard fail so that completers are always added.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We don't need to validate the real command twice, but it's better to
check that the real command name exists and it's not an alias to prevent
loops.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Introduce a proper flag 'VSH_CMD_FLAG_HIDDEN' for hiding commands from
output so that we can validate that there aren't any loops or
misconfigured commands.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Prevent the need to edit the function declarations to put them into the
header. There was even inconsistent use.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Include the proper header instead of duplicating the declaration.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
By doing so we can get rid of the code which violates our coding style
guidelines.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
I think these functions look much more readable with just simple
if conditions.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Rename the temp variable that is being returned and use automatic
pointer clearing for it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
In case the specific VCPU states are not present in the XML we were
taking a fallback code path just noting that all cpus of the VM are
enabled.
This was broken by a mistake in a recent refactor where a 'goto cleanup'
was mistakenly replaced by a 'return NULL'. This broke reporting of cpus
and also caused a memory leak.
Return the fallback cpu map.
Fixes: bd1f40fe7d
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2004429
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
This is currently the only way to view the 'autostart' property for a
node device in virsh.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add ability to set node devices to autostart on boot or parent device
availability.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The domblklist command is designed to show a brief information
about the blocks of a domain. One piece of information that is
shows is "Target "and "Source". Before the modification, the
Vhost disk of SPDK is displayed as "-". After the modification,
the socket associated with it can be displayed.
Signed-off-by: dinglimin <dinglimin@cmss.chinamobile.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The variable is used inside a loop in which it's allocated in
each iteration. Bring it inside the loop so that g_autoptr()
kicks in each iteration.
Fixes: 3caa28dc50
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Recently, I wanted to attach an vhost-user interface but found
out that attach-interface command doesn't support it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Use 'g_strsplit' to split the strings and then concatenate back when the
escape sequence (',,') is used.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a '--split' switch for the 'virsh echo' command and add few test
cases to the virshtest.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove the need for temporary strings by filling the output buffer
directly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Initialize the flags earlier and use VSH_EXCLUSIVE_OPTIONS_VAR to
declare the conflicting options as exclusive.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Note that it's for internal testing use and remove the manpage entry.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some variables are used in a loop and only freed in the cleanup
section because we need to be able to jump out of the loop.
Reduce their scope and free them automatically.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Use 'ostype' instead of generic 'str', to discourage
reuse. Also mark it as autofree.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Use automatic memory cleanup to get rid of the cleanup section,
and of the memory leak that happens inside the loop, because
cap, alloc and phy are only freed once per function.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Remove cleanup sections that are no longer needed, as well
as unnecessary 'ret' variables.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Do not use 'arg' which is later used for an allocated string.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Instead of using the same variable to store either a const pointer
or an allocated string, always make a copy.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Use virAppendElement instead of virInsertElementsN to implement
VIR_APPEND_ELEMENT which allows us to remove error handling as the
only relevant errors were removed when switching to aborting memory
allocation functions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When we dropped virDomainSetMemory usage it got kind of tricky to
figure out the flags correctly.
Originally the logic was following:
no option | --current | --live | --config | --live --config
----------+-----------+--------+----------+----------------
LIVE | CURRENT | LIVE | CONFIG | LIVE & CONFIG
But after the commit removing virDomainSetMemory usage it changed to:
no option | --current | --live | --config | --live --config
----------+-----------+--------+-----------------+----------------
LIVE | CURRENT | LIVE | LIVE & CONFIG | LIVE & CONFIG
This commit fixes the logic back to the original behavior except for
ESX, HyperV and Virtuozzo drivers where virDomainSetMemory() default
behavior was CURRENT instead of LIVE.
Fixes: ce8138564b
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1980199
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Allow the tree view with --all so that we can see all inactive mdevs in
a tree structure nested under their parent devices.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
According to definition of virDomainCoreDumpFormat, the "elf" should be
the first argument in VIR_ENUM_*.
Fixes: 84cc4543be
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1981625
Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In a few places it may happen that the array we want to sort is
still NULL (e.g. because there were no leases found, no paths for
secdriver to lock or no cache banks). However, passing NULL to
qsort() is undefined and even though glibc plays nicely we
shouldn't rely on undefined behaviour.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
virt-host-validate should print "Checking for device assignment IOMMU
support" for all architectures, not only for Intel / AMD.
This is the output without the patch:
```
[fidencio@dentola libvirt]$ virt-host-validate
QEMU: comprobando if device /dev/kvm exists : PASA
QEMU: comprobando if device /dev/kvm is accessible : PASA
QEMU: comprobando if device /dev/vhost-net exists : PASA
QEMU: comprobando if device /dev/net/tun exists : PASA
QEMU: comprobando for cgroup 'cpu' controller support : PASA
QEMU: comprobando for cgroup 'cpuacct' controller support : PASA
QEMU: comprobando for cgroup 'cpuset' controller support : PASA
QEMU: comprobando for cgroup 'memory' controller support : PASA
QEMU: comprobando for cgroup 'devices' controller support : ADVERTENCIA (Enable 'devices' in kernel Kconfig file or mount/enable cgroup controller in your system)
QEMU: comprobando for cgroup 'blkio' controller support : PASA
ADVERTENCIA (Unknown if this platform has IOMMU support)
QEMU: comprobando for secure guest support : ADVERTENCIA (Unknown if this platform has Secure Guest support)
```
This is the output with the patch:
```
[fidencio@dentola libvirt]$ ./build/tools/virt-host-validate
QEMU: Checking if device /dev/kvm exists : PASS
QEMU: Checking if device /dev/kvm is accessible : PASS
QEMU: Checking if device /dev/vhost-net exists : PASS
QEMU: Checking if device /dev/net/tun exists : PASS
QEMU: Checking for cgroup 'cpu' controller support : PASS
QEMU: Checking for cgroup 'cpuacct' controller support : PASS
QEMU: Checking for cgroup 'cpuset' controller support : PASS
QEMU: Checking for cgroup 'memory' controller support : PASS
QEMU: Checking for cgroup 'devices' controller support : WARN (Enable 'devices' in kernel Kconfig file or mount/enable cgroup controller in your system)
QEMU: Checking for cgroup 'blkio' controller support : PASS
QEMU: Checking for device assignment IOMMU support : WARN (Unknown if this platform has IOMMU support)
QEMU: Checking for secure guest support : WARN (Unknown if this platform has Secure Guest support)
```
Signed-off-by: Fabiano Fidêncio <fabiano@fidencio.org>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Previous patches rendered 'return 0' at the end of the function a
dead code. Therefore, the code can be rearranged a bit and the
line can be dropped.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Fabiano Fidêncio <fabiano@fidencio.org>
Ideally, every virHostMsgFail() would be coupled with
VIR_HOST_VALIDATE_FAILURE() so that the failure is correctly
propagated to the caller. However, in
virHostValidateSecureGuests() we are either ignoring @level and
returning 0 directly (no error), or not returning at all, relying
on 'return 0' at the end of the function. Neither of these help
propagate failure correctly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Fabiano Fidêncio <fabiano@fidencio.org>
When validating secure guests support on s390(x) we may read
/proc/cmdline and look for "prot_virt" argument. Reading the
kernel command line is done via virFileReadValueString() which
may fail. In such case caller won't see any error message. But we
can produce the same warning/error as if "prot_virt" argument
wasn't found. Not only this lets users know about the problem,
it also terminates the "Checking for ...." line correctly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Fabiano Fidêncio <fabiano@fidencio.org>
As a part of its checks, virt-host-validate calls virCgroupNew()
to detect CGroup controllers which are then printed out. However,
virCgroupNew() can fail (with appropriate error message set).
Let's print an error onto stderr if that happens.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Fabiano Fidêncio <fabiano@fidencio.org>
Several libvirt functions are called from virt-host-validate.
Some of these functions do report an error on failure. But
reporting an error is coupled with freeing previous error (by
calling virResetError()). But we've never called
virErrorInitialize() and thus resetting error object frees some
random pointer.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Fabiano Fidêncio <fabiano@fidencio.org>
Currently `virt-host-validate` will fail whenever one of its calls fail,
regardless of virHostValidateLevel set.
This behaviour is not optimal and makes it not exactly reliable as a
command line tool as other tools or scripts using it would have to check
its output to figure out whether something really failed or if a warning
was mistakenly treated as failure.
With this change, the behaviour of whether to fail or not, is defined by
the caller of those functions, based on the virHostValidateLevel passed
to them.
https://gitlab.com/libvirt/libvirt/-/issues/175
Signed-off-by: Fabiano Fidêncio <fabiano@fidencio.org>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Cloud-Hypervisor is a KVM virtualization using hypervisor. It
functions similarly to qemu and the libvirt Cloud-Hypervisor driver
uses a very similar structure to the libvirt driver.
The biggest difference from the libvirt perspective is that the
"monitor" socket is seperated into two sockets one that commands are
issued to and one that events are notified from. The current
implementation only uses the command socket (running over a REST API
with json encoded data) with future changes to add support for the
event socket (to better handle shutdowns from inside the VM).
This patch adds support for the following initial VM actions using the
Cloud-Hypervsior API:
* vm.create
* vm.delete
* vm.boot
* vm.shutdown
* vm.reboot
* vm.pause
* vm.resume
To use the Cloud-Hypervisor driver, the v15.0 release of
Cloud-Hypervisor is required to be installed.
Some additional notes:
* The curl handle is persistent but not useful to detect ch process
shutdown/crash (a future patch will address this shortcoming)
* On a 64-bit host Cloud-Hypervisor needs to support PVH and so can
emulate 32-bit mode but it isn't fully tested (a 64-bit kernel and
32-bit userspace is fine, a 32-bit kernel isn't validated)
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: William Douglas <william.douglas@intel.com>
Some of our really old APIs are missing @flags argument. We
introduced their variants with "Flags" suffix and wired some
logic into virsh to call the new variant only if necessary. This
enables virsh to talk to older daemon which may be lacking new
APIs.
However, in case of cmdSetmem() we are talking about v0.1.1
(virDomainSetMemory()) vs. v0.9.0 (virDomainSetMemoryFlags()) and
in case of cmdSetmaxmem() we are talking about v0.0.3
(virDomainSetMaxMemory()) vs v0.9.0 (virDomainSetMemoryFlags()).
Libvirt v0.9.0 was released more than 10 years ago and recently
we dropped support for RHEL-7 which has v4.5.0 (released ~3 years
ago). Thus it is not really necessary to have support in virsh
for such old daemons.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
None of them are currently needed to pass our upstream CI, most were
either for ancient clang versions or coverity for silencing false
positives.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
They were added mostly randomly and we don't really want to keep working
around of false positives.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In previous commit the virDomainCoreDumpWithFormat() API gained
new format. Expose it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
These functions initialize @ret to true and only after something
fails either they call cleanup code (which consists only from
virshDomainFree()) and return false, or they set ret = false and
carry on (when the failure occurred close to cleanup code).
Switch them to the usual pattern in which ret is initialized to
failure, goto cleanup is used and ret is set to true only after
everything succeeded.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In my commit of v7.1.0-rc1~376 I've simplified the logic of
handling @flags. My assumption back then was that calling
virDomainSetMemory() is equivalent to
virDomainSetMemoryFlags(flags = 0). But that is not the case,
because it is equivalent to virDomainSetMemoryFlags(flags =
VIR_DOMAIN_AFFECT_LIVE). Fix the condition that calls the old
API.
Fixes: b5e267e8c5
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1961118
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The current setup uses a single script that is symlinked twice
and that tries to configure bash completion for both virsh and
virt-admin, even if only one of them is installed. This also
forces us to have a -bash-completion RPM package that only
contains the tiny shared file.
Rework bash completion support so that two scripts are
generated, each one tailored to a specific command.
Since the shared script no longer exists after this change,
the corresponding RPM package becomes empty.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Our vsh bash completion string is merely just a wrapper over
virsh/virt-admin complete (cmdComplete) - a hidden command that
uses internal readline completion to generate list of candidates.
But this means that we have to pass some additional arguments to
the helper process: e.g. connection URI and R/O flag.
Candidates are printed on a separate line each (and can contain
space), which means that when bash is reading the helper's output
into an array, it needs to split items on '\n' char - hence the
IFS=$'\n' prefix on the line executing the helper. This was
introduced in b889594a70.
But this introduced a regression - those extra arguments we might
pass are stored in a string and previously were split on a space
character (because $IFS was kept untouched and by default
contains space). But now, after the fix that's no longer the case
and thus virsh/virt-admin sees ' -r -c URI' as one argument.
The solution is to take $IFS out of the picture by storing the
extra arguments in an array instead of string.
Fixes: b889594a70
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The g_path_is_absolute() considers more situations
than just a simply "path[0] == '/'".
Related issue: https://gitlab.com/libvirt/libvirt/-/issues/12
Signed-off-by: Luke Yue <lukedyue@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virDomainGetDiskErrors uses the weird semantics where we make the
caller query for the number of elements and then pass pre-allocated
structure.
The cleanup section errorneously used the 'count' variable to free the
allocated elements for the API but 'count' can be '-1' in cases when the
API returns failure, thus attempting to free beyond the end of the
array.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/155
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Commit 95f8e3237e which introduced XML schema validation
for snapshot XMLs always asserted the validation for the XML generated
by 'virsh snapshot-create-as' on the basis that it's libvirt-generated,
thus valid.
This unfortunately isn't true as users can influence certain bits of the
XML such as the disk image path which must be a full path. Thus if a
user tries to invoke virsh as:
$ virsh snapshot-create-as upstream --diskspec vda,file=relative.qcow2
error: XML document failed to validate against schema: Unable to validate doc against /path/to/domainsnapshot.rng
Extra element disks in interleave
Element domainsnapshot failed to validate content
They get a rather useless error from the libxml2 RNG validator.
With this fix applied, we get to the XML parser in libvirtd which has a
more reasonable error:
$ virsh snapshot-create-as upstream --diskspec vda,file=relative.qcow2
error: XML error: disk snapshot image path 'relative.qcow2' must be absolute
Instead users can force validation of the XML generated by 'virsh
snapshot-create-as' by passing the '--validate' flag.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Historically, we declared pointer type to our types:
typedef struct _virXXX virXXX;
typedef virXXX *virXXXPtr;
But usefulness of such declaration is questionable, at best.
Unfortunately, we can't drop every such declaration - we have to
carry some over, because they are part of public API (e.g.
virDomainPtr). But for internal types - we can do drop them and
use what every other C project uses 'virXXX *'.
This change was generated by a very ugly shell script that
generated sed script which was then called over each file in the
repository. For the shell script refer to the cover letter:
https://listman.redhat.com/archives/libvir-list/2021-March/msg00537.html
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Use g_auto for the string list and remove 'ret' and 'cleanup'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Follow best practices and add a unsigned int flags parameter to these
new APIs that have not been in a release yet.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
One of the error branches used a plain free where vshCommandFree
was required.
https://bugzilla.redhat.com/show_bug.cgi?id=1943415
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This virsh command maps to virNodeDeviceCreate(), which starts a node
device that has been previously defined by virNodeDeviceDefineXML().
This is only supported for mediated devices.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Add a virsh command that maps to virNodeDeviceUndefine().
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Several functions accept providing a node device by name or by wwnn,wwpn
pair. Extract the logic to do this into a function that can be used by
both callers.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Add a virsh command that maps to virNodeDeviceDefineXML().
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Now that we can filter active and inactive node devices in
virConnectListAllNodeDevices(), add these switches to the virsh command.
Eventual output (once everything is hooked up):
virsh # nodedev-list --cap mdev
mdev_bd2ea955_3402_4252_8c17_7468083a0f26
virsh # nodedev-list --inactive --cap mdev
mdev_07d8b8b0_7e04_4c0f_97ed_9214ce12723c
mdev_927c040f_ae7d_4a35_966e_286ba6ebbe1c
virsh # nodedev-list --all --cap mdev
mdev_07d8b8b0_7e04_4c0f_97ed_9214ce12723c
mdev_927c040f_ae7d_4a35_966e_286ba6ebbe1c
mdev_bd2ea955_3402_4252_8c17_7468083a0f26
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Since a mediated device can be persistently defined by the mdevctl
backend, we need additional lifecycle events beyond CREATED/DELETED to
indicate that e.g. the device has been stopped but the device definition
still exists.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Generated by the following spatch:
@@
expression a, b;
@@
+ b = g_steal_pointer(&a);
- b = a;
... when != a
- a = NULL;
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Introduce command 'virsh domstats --dirtyrate' for reporting memory
dirty rate information. The info is listed as:
Domain: 'vm0'
dirtyrate.calc_status=2
dirtyrate.calc_start_time=1534523
dirtyrate.calc_period=1
dirtyrate.megabytes_per_second=5
Signed-off-by: Hao Wang <wanghao232@huawei.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Tools depend on keycode generated sources, so declare that as an
explicit dependency, otherwise it might fail with:
../tools/virsh-completer-domain.c:35:10: fatal error: 'virkeynametable_linux.h' file not found
^~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: b0f4cf25a6
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
These functions are identical. Made using this spatch:
@@
expression path, mode;
@@
- virFileMakePathWithMode(path, mode)
+ g_mkdir_with_parents(path, mode)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a wrapper that will handle the out of memory condition by abort()
and also prevents callers from having to typecast the argument.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
The libvirt_recover_xattrs.sh script can be used to remove stale
XATTRs that were left behind by secdrivers (which should happen
only if there's an imbalance between set and restore calls).
Anyway, the script has '-n' switch which is supposed to perform
just a dry run, i.e. just to report which files have XATTRs set
without any attempt to remove them.
But, when rewriting the script a few months ago a typo was
introduced which made the script report no files even if there
were files with XATTRs.
Fixes: 5377177f80
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use g_auto* pointers to avoid the need of a cleanup label. The
type of the pointer 'virDomainPtr dom' was changed to its alias
'virshDomainPtr' to allow the use of g_autoptr().
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Via coccinelle (not the handbag!)
spatches used:
@ rule1 @
identifier a, b;
symbol NULL;
@@
- b = a;
... when != a
- a = NULL;
+ b = g_steal_pointer(&a);
@@
- *b = a;
... when != a
- a = NULL;
+ *b = g_steal_pointer(&a);
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
This completer offers completion for --codeset argument of
send-key command.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Our implementation was heavily inspired by the glib version so it's a
drop-in replacement.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The glib implementation doesn't tolerate NULL but in most cases we check
before anyways. The rest of the callers adds a NULL check.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The glib variant doesn't accept NULL list, but there's just one caller
where it wasn't checked explicitly, thus there's no need for our own
wrapper.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
After previous patches neither vshReadlineCommandGenerator() nor
vshReadlineOptionsGenerator() use prefix that user wants to
complete. The argument is marked as unused in both functions.
Drop it then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Firstly, move variable declarations into the inner most block
they are used. Secondly, use for() loop instead of while so that
we don't have to advance loop counter explicitly on 'continue'.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
The way we currently call completer callbacks is that if we've
found --option that user wants to complete value for and it has
callback set then the callback is called.
And just before that, if no --option to have the value completed
is found or is found and is of boolean type then a list of
--option is generated (for given command).
But these two conditions can never be true at the same time
because boolean type of --options do not accept values. Therefore
the calling of completer callback can be promoted onto the same
level as the --option list generation.
This means that merging of two lists can be dropped to and
completer callback can store its retval directly into @list (but
as shown earlier one of the string lists to merge is always
empty).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Completer callbacks generate all possible outputs ignoring any partial
input (e.g. prefix of a domain name) and then use vshCompleterFilter() to
filter out those strings which don't fit the partial input (prefix).
In contrast, vshReadlineCommandGenerator() does some internal filtering and
only generates completions that match a given prefix. Rather than treating
these scenarios differently, simply generate all possible options and
filter them all at the end.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Completer callbacks generate all possible outputs ignoring any partial
input (e.g. prefix of a domain name) and then use vshCompleterFilter() to
filter out those strings which don't fit the partial input (prefix).
In contrast, vshReadlineOptionsGenerator() does some internal filtering and
only generates completions that match a given prefix. Rather than treating
these scenarios differently, simply generate all possible options and
filter them all at the end.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
The vshReadlineParse() function is called whenever user hits
<TAB><TAB>. If there is no command (or a partially written one),
then a list of possible commands is printed to the user. But, if
there is a command then its --options are generated. But
obviously, we can not generate --options if there already is an
--option that's expecting a value. For instance, consider:
virsh # start --domain <TAB><TAB>
In this case we want to call completer for --domain option, but
that's a different story.
Anyway, the way that we currently check whether --options list
should be generated is checking the type of the last --option. If
it isn't DATA, STRING, INT, or ARGV (all these expect a value),
then we can generate --option list. Well, writing the condition
this way is needlessly verbose and also prone to errors (see
d9a320bf97 for example).
We know that boolean type does not require a value. This leaves
us with the only type that was not mentioned yet - VSH_OT_ALIAS.
This is a special type for backwards compatibility and it refers
to another --option which can be just any type.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
There are two functions that are used to generate completion
lists: vshReadlineCommandGenerator() for command names and
vshReadlineOptionsGenerator() for --options for given command.
Both return a string list, but may also fail while constructing
it. For that case, they call g_strfreev() explicitly, which is
needless since we have g_auto(GStrv).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
The vshReadlineOptionsGenerator() function returns a string list
of all --options for given command. But the way that individual
items on the list are allocated can be written better.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
The aim of vshCompleterFilter() is to take a string list and a
prefix and remove all strings from the list that don't have the
desired prefix. The function is used to filter out those strings
returned by a completer callback that don't correspond with
user's (partial) input. For instance, domain name completer
virshDomainNameCompleter() returns all domain names and then
vshCompleterFilter() refines the list so that only domains with
correct prefix of their name are offered to user. This was a
design choice - it allows us to have shorter completers as they
do not have to copy the list filtering over and over.
Having said all of that, it may happen that a completer does not
return anything (e.g. there is no domain in requested state,
virsh is not connected and thus completer exited early, etc.). In
that case, the string list is NULL and vshCompleterFilter() can
simply return early.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
This saves us explicit call of g_strfreev() in error path.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
We've invented VSH_OT_ALIAS type for --option so that we can
rewrite some --options (e.g. fix spelling). For instance
blkdeviotune command uses this feature heavily:
--options-with-dash are preferred over old
--options_with_underscore. Both versions are supported but only
the new ones (not aliased) are documented and reported in --help.
Except for options completer, which happily put also aliased
versions in front of user's eyes.
Note, there is a second (gross) way we use aliases: to rewrite
options from --oldoption to --newoption=value (for instance
--shareable option of attach-disk is an alias of
--mode=shareable). And just like with the previous group - don't
generate them into the list of possible options.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
There are few cases where STREQLEN() is called like this:
STREQLEN(var, string, strlen(string))
which is the same as STRPREFIX(var, string). Use STRPREFIX()
because it is more obvious what the check is doing.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Switch the secret value to 'g_autofree' for handling of the memory and
clear it out using virSecureErase.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Use a single buffer for the secret to make it easier to follow it's
lifecycle. For base64 decoding use a local temporary buffer which will
be cleared right away.
This also uses virSecureErase for clearing the bufer instead of
VIR_DISPOSE_N which is being phased out.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Convert the conditions to else if so that it's obvious that only one of
the cases will ever be used.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
pthread_sigmask() returns 0 on success and "a non-zero value
on failure", but not neccessarily a negative one.
Found by clang-tidy's "bugprone-posix-return" check.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
What code tries to achieve is that if no flags were provided to
either 'setmem' or 'setmaxmem' commands then the old (no flags)
API is called to be able to communicate with older daemons.
Well, the code can be simplified a bit.
Note that with this change the old no flag version of APIs is
used more often. Previously if --current argument was given it
resulted in *Flags() version to be called even though it is not
necessary - VIR_DOMAIN_AFFECT_CURRENT is implied.
Therefore, this change in fact allows virsh to talk with broader
set of daemons. No other user visible changes were made.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The way our bash completion string is that is gets user's input
and lets virsh completion code do all the work by calling 'virsh
complete -- $INPUT". The 'complete' command is a "secret",
unlisted command that exists solely for this purpose. After it
has done it's part, it prints candidates onto stdout, each
candidate on its own line, e.g. like this:
# virsh complete -- "net-u"
net-undefine
net-update
net-uuid
These strings are then stored into a bash array $A like this:
A=($($1 ${CMDLINE} complete -- "${INPUT[@]}" 2>/dev/null))
This array is then thrown back at bash completion to produce
desired output. So far so good. Except, when there is an option
with space. For instance:
# virsh complete -- start --domain ""
uefi\ duplicate
uefi
Bash interprets that as another array item because by default,
Internal Field Separator (IFS) = set of characters that bash uses
to split words at, is: space, TAB, newline. We don't want space
nor TAB. Therefore, we have to set $IFS when storing 'virsh
complete' output into the array.
Thanks to Peter who suggested it.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/116
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If user is trying to auto complete a value that contains a space,
they have two options: use backslash to escape space or use
quotes, like this:
virsh # start --domain "domain with space<TAB>
However, in this case our tokenizer sees imbalance in (double)
quotes: there is a starting one that's missing its companion.
Well, that's obvious - user is still in process of writing the
command. What we need to do in this case is to ignore the
imbalance and return success (from the tokenizer) - readline will
handle closing the quote properly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The way that auto completion works currently is that user's input
is parsed, and then we try to find the first --option (in the
parsed structure) that has the same value as user's input around
where <TAB> was pressed. For instance, for the following input:
virsh # command --arg1 hello --arg2 world<TAB>
we will see "world" as text that user is trying to autocomplete
(this is affected by rl_basic_word_break_characters which
readline uses internally to break user's input into individual
words) and find that it is --arg2 that user is trying to
autocomplete. So far so good, for this naive approach. But
consider the following example:
virsh # command --arg1 world --arg2 world<TAB>
Here, both arguments have the same value and because we see
"world" as text that user is trying to autocomplete we would
think that it is --arg1 that user wants to autocomplete. This is
obviously wrong.
Fortunately, readline stores the current position of cursor (into
rl_point) and we can use that when parsing user's input: whenever
we reach a position that matches the cursor then we know that
that is the place where <TAB> was pressed and hence that is the
--option that user wants to autocomplete. Readline stores the
cursor position as offset (numbered from 1) from the beginning of
user's input. We store this input into @parser->pos initially,
but then advance it as we tokenize it. Therefore, what we need is
to store the original position too.
Thanks to Martin who helped me with this.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The way our completer callbacks work is that they return all
possible candidates and then vshCompleterFilter() is called to
prune the list of all candidates removing those which don't match
user's input. This allows us to have simpler completer callbacks
as their only job is to fetch all possible candidates.
Anyway, if the completion candidate we're returning contains a
space, it has to be escaped (shell like escaping), unless there
is already a quote character (single quote or double quote).
But ordering is critical. Completer callback returns string
without any escaping, but the filter function sees the user input
escaped. For instance, if user's input is "domain with
space<TAB>" then the filtering function gets "domain\ with\
space" as user's input but completer returns "domain with space".
Since these two strings don't match the filtering function
removes this candidate from the list. What we need to do is to
escape strings before calling the filtering function. This way,
the filtering function will see two same strings.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In next commit the block that does escaping of returned string
will be brought into this block. But both contain variable @buf
and use it in different contexts. Rename @buf from @state == 0
block to @line which reflects its purpose better.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Instead of freeing @partial and @buf explicitly, we can use
g_auto*() to do that automatically.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
On readline completion vshReadlineCompletion() is called which
does nothing more than calling rl_completion_matches() with
vshReadlineParse() as a callback. This means, that
vshReadlineParse() is called repeatedly, each time returning next
completion candidate, until it returns NULL which is interpreted
as the end of the list of candidates.
The function takes two parameters: @text which is a portion of
input line around cursor when TAB was pressed, and @state. The
@state is an integer that is zero on the very first call and
non-zero on each subsequent call (in fact, readline does @state++
on each call).
Anyway, the idea is that the callback gets the whole list of
candidates on @state == 0 and returns one candidate at each call.
And this is what vshReadlineParse() is doing but some variables
(@partial, @cmd and @opt) are really used only in the @state == 0
case but declared for whole function. We can limit their scope by
declaring them inside the @state == 0 body which also means that
they don't have to be static anymore.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
A backslash is the way we escape characters in virsh. For
instance:
virsh # start domain\ with\ long\ name
For readline completion, we do not want to get four separate
words ("domain", "with", "long", "name"). This means, that we
can't use virBufferEscapeShell() because it doesn't escape spaces
the way we want.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This variable is unused since introduction of the function in
v0.8.5~150.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The way this completer works is that it dumps XML of specified
domain and then tries to look for @name attribute of <alias/>
element. However, the XPATH it uses is not correct which results
in no aliases returned by the completer.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
As can be seen in commit 8a62a1592a (from
autoconf era), the coverage flags have to be used also when linking
objects. However, this was not reflected when we switched to meson.
Without this patch linking fails with undefined references to various
__gcov_* symbols.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
All these headers are indirectly included provided by virfile.h having
virstoragefile.h which will be removed in the following patch.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Domain name can contain spaces in which case it's not immediately clear
from virsh messages where the boundary of the name is. Enclose all %s
formatters in apostrophes as delimiters.
Done via the following vim regex:
%s/omain %s/omain '%s'/g
This patch changes:
$ virsh undefine --snapshots-metadata 'OWASP Broken Web Apps VM v1.2'
Domain OWASP Broken Web Apps VM v1.2 has been undefined
to:
$ virsh undefine --snapshots-metadata 'OWASP Broken Web Apps VM v1.2'
Domain 'OWASP Broken Web Apps VM v1.2' has been undefined
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
After v6.3.0-rc1~64 a lease can have infinite expiry time. This
means that the expiration time will appear as a value of zero.
Do the expiration check only if the expiration time is not zero.
Fixes: 97a0aa2467
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The refactor left in the 'if (addr)' check,
but before 'addr' was the return value of strchr
and now it's the return value of virshAddressParse.
Check 'a' instead since that's the return of strchr now.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Fixes: 67bf91e1c3
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add support to filter by 'ap_matrix' capability.
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Add support for AP matrix device in libvirt node device driver.
https://www.kernel.org/doc/html/latest/s390/vfio-ap.html#the-design
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Add support to filter by 'ap_card' and 'ap_queue' capabilities.
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Each AP card device can support upto 256 AP queues. AP queues are
also detected by udev, so add support for libvirt nodedev driver.
https://www.kernel.org/doc/html/latest/s390/vfio-ap.html#ap-architectural-overview
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Introduce support for the Adjunct Processor (AP) crypto card device.
Udev already detects the device, so add support for libvirt nodedev
driver.
https://www.kernel.org/doc/html/latest/s390/vfio-ap.html#ap-architectural-overview
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
When removing SSH keys via set-user-sshkeys virsh command, then
files to remove are read from passed file. But when
experimenting, I've passed /dev/null as the file which resulted
in API checks which caught that @keys argument of
virDomainAuthorizedSSHKeysSet() can't be NULL. This is because if
the file is empty then its content is an empty string and thus
the buffer the file was read in to is not NULL.
Long story short, error is reported correctly, but it's not
necessary to go through public API to catch it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In v6.10.0-rc1~104 I've added a virsh command that exposes
virDomainAuthorizedSSHKeysSet() API under "set-user-sshkeys"
command. The command accepts mutually exclusive "--reset" and
"--remove" options (among others). While the former controls the
VIR_DOMAIN_AUTHORIZED_SSH_KEYS_SET_APPEND flag, the latter
controls the VIR_DOMAIN_AUTHORIZED_SSH_KEYS_SET_REMOVE flag.
These flags are also mutually exclusive. But the code that sets
them has a logical error which may result in both flags being
set. In fact, this results in user being not able to set just the
remove flag.
Fixes: 87d12effbe
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1904674
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The comment that
> For instance, qemu-ga doesn't support guest time synchronization on
> Windows guests, but Linux ones.
Was correct at the time, but has since been addressed by
qemu/qemu@105fad6bb2, which added support for set-time without a time
argument, as used by `virsh domtime --sync` by libvirt-guests.sh. I can
confirm that `virsh domtime --sync` works correctly on a Windows 10
guest, as does `SYNC_TIME=1`. (Note that there can be a significant
delay between when the command completes and when the guest time
finishes synchronizing due to QEMU GA calling `w32tm` with `/nowait`,
which complicates testing.)
Signed-off-by: Kevin Locke <kevin@kevinlocke.name>
Loop for multiple PATH arguments to support shell pattern expansion.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In some cases you want to fix a certain directory while you don't really
care whether there are other VMs running. Add a option to disable the
check.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Linux and FreeBSD have different prefix. In the current state we've
tried to reset the labels for both systems which resulted in errors like
this:
Fixing /tmp/bitmaps2.qcow2
setfattr: /tmp/bitmaps2.qcow2: Operation not supported
setfattr: /tmp/bitmaps2.qcow2: Operation not supported
setfattr: /tmp/bitmaps2.qcow2: Operation not supported
setfattr: /tmp/bitmaps2.qcow2: Operation not supported
setfattr: /tmp/bitmaps2.qcow2: Operation not supported
setfattr: /tmp/bitmaps2.qcow2: Operation not supported
The 6 failed 'setfattrs' correspond to the wrong prefix.
Select the correct prefix based on the kernel name and modify the code
appropriately.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Existing practice with the filesystem fields reported for the
virDomainGetGuestInfo API is to use the singular form for
field names. Ensure the disk info follows this practice.
Fixes
commit 05a75ca2ce
Author: Marc-André Lureau <marcandre.lureau@redhat.com>
Date: Fri Nov 20 22:09:46 2020 +0400
domain: add disk informations to virDomainGetGuestInfo
commit 0cb2d9f05d
Author: Marc-André Lureau <marcandre.lureau@redhat.com>
Date: Fri Nov 20 22:09:47 2020 +0400
qemu_driver: report guest disk informations
commit 172b830435
Author: Marc-André Lureau <marcandre.lureau@redhat.com>
Date: Fri Nov 20 22:09:48 2020 +0400
virsh: add --disk informations to guestinfo command
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Glib provides g_auto(GStrv) which is in-place replacement of our
VIR_AUTOSTRINGLIST.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Han Han <hhan@redhat.com>
Related issue: https://gitlab.com/libvirt/libvirt/-/issues/16
Added in support for the following parameters in attach-disk:
--source-protocol
--source-host-name
--source-host-socket
--source-host-transport
Added documentation to virsh.rst specifying usage.
Signed-off-by: Ryan Gahagan <rgahagan@cs.utexas.edu>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Convert the code to the new XML formatting approach for simpler code and
future additions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
For extendability and clarity add enum virshAttachDiskSourceType and
use it to drive the XML formatting.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The helper started as helper for cmdAttachDisk but is now used outside
of it too.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Use 'virshAddress' prefix for all the related structs and enums.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Rewrite and rename the address parser.
As a fallout the use of the removed 'str2PCIAddress' is replaced by
virshAddressParse and virshAddressFormat.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
DISK_ADDR_TYPE_SATA, DISK_ADDR_TYPE_IDE and DISK_ADDR_TYPE_SCSI are
driven by basically identical data types. Unify them. Note that
changes to 'str2DiskAddress' are deliberately lazy as it will be
refactored later.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Introduce virshAddressFormat with code from cmdAttachDiskFormatAddress
to format the address.
Note that this patch fixes some whitespace inconsistencies in the
formatted addresses.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
First step is to remove all of the address handling code to a new
function called 'cmdAttachDiskFormatAddress'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
'virsh attach-disk' uses stat() to determine if the 'source' is a
regular file. If stat fails though it assumes that the file is block.
Since it's way more common to have regular files and the detection does
not work at all when accessing a remote host, modify the default to
assume type='file' by default.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Remove the unnecessary 'cleanup:' label since we can directly return as
the memory clearing is now automated.
We can also remove the 'functionReturn' variable and use the usual
pattern of returning success.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Using virtCgroupNewSelf() is not correct with cgroups v2 because the
the virt-host-validate process is executed from from the same cgroup
context as the terminal and usually not all controllers are enabled
by default.
To do a proper check we need to use the root cgroup to see what
controllers are actually available. Libvirt or systemd ensures that
all controllers are available for VMs as well.
This still doesn't solve the devices controller with cgroups v2 where
there is no controller as it was replaced by eBPF. Currently libvirt
tries to query eBPF programs which usually works only for root as
regular users will get permission denied for that operation.
Fixes: https://gitlab.com/libvirt/libvirt/-/issues/94
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The new virsh commands are:
get-user-sshkeys
set-user-sshkeys
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
We try to enable keepalive oportunistically. If it's not supported by
the connection driver and it was not explicitly requested we keep the
error object set and can report it in some cases accidentally:
--- stdout ---
TEST: /home/pipo/libvirt/tests/virsh-self-test
! 1 FAILED
--- stderr ---
error: parameter 'target' of command 'attach-disk' must be listed before optional parameters
error: this function is not supported by the connection driver: virConnectSetKeepAlive
-------
Clear the stored libvirt error.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function can't fail so there's no need to return a value or check it
in the callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The help formatter called vshCmddefOptParse just for validation
purposes. Since vshCmddefOptParse no longer validates the command itself
and we don't need the bitmaps returned by it we can drop the call
entirely.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since vshCmddefCheckInternals now has this check we no longer need it in
vshCmddefOptParse.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We no longer print help for every command to validate the args.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'vshCmddefCheckInternals' is the go-to place for all checks related to
the definition of parameters for commands, but the check that all
mandatory parameters must be ordered before optional parameters was
still only in vshCmddefOptParse.
Adding a non-compliant option would not be caught by our test suite as
'virsh self-test' doesn't call vshCmddefOptParse.
Re-implement the check in vshCmddefCheckInternals.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If a parameter definition is invalid we can include the name of the
parameter for simpler debugging.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The upcoming patches introduce completers into virsh-completer-domain.c,
They will invoke the functions which are defined in virsh-domain.c, So
these functions need to be declared in virsh-domain.h.
Signed-off-by: Lin Ma <lma@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We know that the bash completer automatically handle colon by preceding
it with an escape character backslash.
While our bash autompletion file vsh completes multiple items, In case
there're multiple items which have same prefix and the content of completion
items contain colon(say mac address), The vsh needs to correctly hands
the backslash which are added by bash completer, Otherwise the completion
won't be successful. This patch fixes this problem.
e.g.:
# virsh domiflist --domain VM
Interface Type Source Model MAC
-------------------------------------------------------------
vnet0 network default virtio 52:54:00:fb:7b:f5
vnet1 bridge br0 virtio 52:54:00:80:1b:21
Before:
# virsh detach-interface --domain VM --mac <TAB>
# virsh detach-interface --domain VM --mac 52\:54\:00\:<TAB><TAB>
After:
# virsh detach-interface --domain VM --mac <TAB>
# virsh detach-interface --domain VM --mac 52\:54\:00\:<TAB><TAB>
52:54:00:80:1b:21 52:54:00:fb:7b:f5
# virsh detach-interface --domain VM --mac 52\:54\:00\:
Signed-off-by: Lin Ma <lma@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It will be helpful to get the desired string of interface name/mac in a
consistent way.
Signed-off-by: Lin Ma <lma@suse.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The enum constant names should all have a prefix that matches the enum
name. VIR_DOMAIN_CHECKPOINT_REDEFINE_VALIDATE was missing the "CREATE_"
part of the name prefix.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Some completers for libvirt related tools might want to list
domain IDs only. Just like the one I've implemented for
virt-viewer [1]. I've worked around it using some awk magic,
but if it was possible to just 'virsh list --id' then I could
drop awk.
1: https://www.redhat.com/archives/virt-tools-list/2019-May/msg00014.html
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The function is marked as unused. Remove it from the tree
until a new use case can be found.
Unused since: 38cc07b7bc
Signed-off-by: Yi Li <yili@winhong.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Setting SYNC_TIME=1 does not work on autostarted guests.
See https://bugzilla.redhat.com/show_bug.cgi?id=1555398.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
All of these conversions are trivial - VIR_DIR_CLOSE() (aka
virDirClose()) is called only once on the DIR*, and it happens just
before going out of scope.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This will make the trivial nature of a conversion to g_autoptr (in a
later patch) more obvious.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The current udev node device driver ignores all events related to vdpa
devices. Since libvirt now supports vDPA network devices, include these
devices in the device list.
Example output:
virsh # nodedev-list
[...ommitted long list of nodedevs...]
vdpa_vdpa0
virsh # nodedev-dumpxml vdpa_vdpa0
<device>
<name>vdpa_vdpa0</name>
<path>/sys/devices/vdpa0</path>
<parent>computer</parent>
<driver>
<name>vhost_vdpa</name>
</driver>
<capability type='vdpa'>
<chardev>/dev/vhost-vdpa-0</chardev>
</capability>
</device>
NOTE: normally the 'parent' would be a PCI device instead of 'computer',
but this example output is from the vdpa_sim kernel module, so it
doesn't have a normal parent device.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Introduce memory failure event. Libvirt should monitor domain's
event, then posts it to uplayer. According to the hardware memory
corrupted message, a cloud scheduler could migrate domain to another
health physical server.
Several changes in this patch:
public API:
include/*
src/conf/*
src/remote/*
src/remote_protocol-structs
client:
examples/c/misc/event-test.c
tools/virsh-domain.c
With this patch, each driver could implement its own method to run
this new event.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch adds new schema and adds support for parsing and formatting
domain configurations that include vdpa devices.
vDPA network devices allow high-performance networking in a virtual
machine by providing a wire-speed data path. These devices require a
vendor-specific host driver but the data path follows the virtio
specification.
When a device on the host is bound to an appropriate vendor-specific
driver, it will create a chardev on the host at e.g. /dev/vhost-vdpa-0.
That chardev path can then be used to define a new interface with
type='vdpa'.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
As preparation for g_autoptr() we need to change the function to take
only virCgroupPtr.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
The header has to be explicitly added to pull definition of bool_t and a
few other types. Otherwise packet-libvirt.c can't be compiled.
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
I left in a 'return' or 'goto cleanup' in a few places
where I did the conversion manually.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reported-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
We do not have a legacy API for listing network ports
so there's nothing to fall back on.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Switch the allocation in virshSnapshotListCollect and
its cargo-culted Checkpoint counterpart to two separate
g_new0 calls and move the boolean expression to
the if condition that chooses between them.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
We no longer report any errors so all callers can be replaced by
virBitmapNew. Additionally virBitmapNew can't return NULL now so error
handling is not necessary.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
WITH_VIRTUALPORT just checks that we are building on Linux and that
IFLA_PORT_MAX is defined in linux/if_link.h. Back when 802.11Qb[gh]
support was added, the IFLA_* stuff was new (introduced in kernel
2.6.35, backported to RHEL6 2.6.32 kernel at some point), and so this
extra check was necessary, because libvirt was being built on Linux
distros that didn't yet have IFLA_* (e.g. older RHEL6, all
RHEL5). It's been in the kernel for a *very* long time now, so all
supported versions of all Linux platforms libvirt builds on have it.
Note that the above paragraph implies that the conditional compilation
should be changed to #if defined(__linux__). However, the astute
reader will notice that the code in question is sending and receiving
netlink messages, so it really should be conditional on WITH_LIBNL
(which implies __linux__) instead, so that's what this patch does.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
portability: Returning an integer in a function with pointer
return type is not portable. [CastIntegerToAddressAtReturn]
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
