We need to parse a source XML block for FindPoolSources, so this is a step
in sharing the parsing. The new storage pool XML 2 XML tests cover this area
pretty well to ensure we aren't causing regressions.
This patch adds an optional attribute to the <bootp> tag, that
allows to specify a TFTP server address other than the address of
the DHCP server itself.
This can be used to forward the BOOTP settings of the host down to the
guest. This is something that configurations such as Xen's default
network achieve naturally, but must be done manually for NAT.
* docs/formatnetwork.html.in: Document new attribute.
* docs/schemas/network.rng: Add it to schema.
* src/conf/network_conf.h: Add it to struct.
* src/conf/network_conf.c: Add it to parser and pretty printer.
* src/network/bridge_driver.c: Put it in the dnsmasq command line.
* tests/networkxml2xmlin/netboot-proxy-network.xml
tests/networkxml2xmlout/netboot-proxy-network.xml
tests/networkxml2xmltest.c: add new tests
In xenInotifyXendDomainsDirLookup() the wrong UUID variable is used
to search in the config info list.
In xenInotifyEvent() the event is dispatched if it's NULL.
Both were introduced in bc898df2c7.
We should always be using virGetHostname in place of
gethostname; thus add in a new syntax-check rule to make
sure no new uses creep in.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
We can slightly tighten up the regex's used to detect the use of
nonreentrant functions. We can also check src/util/virterror.c
by modifying a comment; I think it's worth it to get the additional
coverage.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
xenUnifiedDomainEventRegister() calls out to
virDomainEventCallbackListAdd(), which increments the reference
count on the connection. That is fine, but then
xenUnifiedDomainEventRegister() increments the usage count again,
leading to a usage count leak. Remove the increment in the xen
register, and the UnrefConnect in the xen unregister.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
If no matching device was found (cap == NULL) then no strdup() call
was made and *wwnn and *wwpn are untouched. Checking them for NULL
in this situation may result in reporting an false-positive OOM error
because *wwnn and *wwpn may be initialized to NULL by the caller.
Only check *wwnn and *wwpn for NULL if a matching device was found
(cap != NULL) and thus strdup() was called.
* src/conf/node_device_conf.c: only report an OOM error if there
really is one
virXPathNodeSet() could return -1 when doing an evaluation failure
due to xmlXPathEval() from libxml2 behaviour.
* src/util/xml.c: make sure we always return 0 unless the returned
XPath type is of the wrong type (meaning the query passed didn't
evaluate to a node set and code must be fixed)
https://bugzilla.redhat.com/show_bug.cgi?id=528575
virsh -c lxc:/// autostart vm1
was crashing the daemon
* src/lxc/lxc_conf.h src/lxc/lxc_conf.c: initialize the driver
autostartDir to avoid a NULL reference and implement autostart for LXC
Currently MAC address configuration of container veth is just ignored.
This patch implements the missing feature.
* src/lxc/veth.c, src/lxc/veth.h: add setMacAddr
* src/lxc/lxc_driver.c: set macaddr of container veth if specified
Most of the hash iterators need to modify either payload of
data args. The const annotation prevents this.
* src/util/hash.h, src/util/hash.c: Remove const-ness from
virHashForEach/Iterator
* src/xen/xm_internal.c: Remove bogus casts
A cgroup file returns integer value terminated with '\n' and remaining
it has sometimes harmful effects, for example it leads virStrToLong_ull
to fail.
* src/util/cgroup.c: strip out terminating \n when reading a value
If the the qemu and kvm binaries are the same, we don't include machine
types in the kvm domain info.
However, the code which refreshes the machine types info from the
previous capabilities structure first looks at the kvm domain's info,
finds it matches and then copies the empty machine types list over
for the top-level qemu domain.
That doesn't make sense, we shouldn't copy an empty machin types list.
* src/qemu/qemu_conf.c: qemudGetOldMachinesFromInfo(): don't copy an
empty machine types list.
* src/util/buf.c: if virBufferEscapeString was called on a buffer that
had 0 bytes of space, a size of -1 will be passed to snprintf, resulting
in a segmentation fault, this preallocate some space.
* src/conf/storage_conf.c src/conf/storage_conf.h: extend the enums
and values
* docs/schemas/storagepool.rng: add to the list of storage pool type
formats
Normally, when you migrate a domain from host A to host B,
the domain on host A remains defined but shutoff and the domain
on host B remains running but is a "transient". Add a new
flag to virDomainMigrate() to allow the original domain to be
undefined on source host A, and a new flag to virDomainMigrate() to
allow the new domain to be persisted on the destination host B.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
When specifying bridge delay via network XML define, we were looking for
the 'delay' attribute, but would dump the value as 'forwardDelay'. Have
the output match the expected input (and schema).
The fread_file_lim() function uses fread() but never handles
EINTR results, causing unexpected failures when reading QEMU
help arg info. It was unneccessarily using FILE * instead
of plain UNIX file handles, which prevented use of saferead()
* src/util/util.c: Switch fread_file_lim over to use saferead
instead of fread, remove FILE * use, and rename
$ sudo virsh pool-start idontexist
10:58:18.716: warning : processCallDispatchReply:7612 : Method call error
error: failed to get pool 'idontexist'
error: Storage pool not found: no pool with matching name 'idontexist'
That warning doesn't server much purpose being printed via a virsh call. So
remove the message.
The logic for running the decompression programs was broken in
commit f238709304, so that for
non-raw formats the decompression program was never run, and
for raw formats, it tried to exec an argv[] with initial NULL
in the program name.
* src/qemu/qemu_driver.c: Fix logic in runing decompression program
If one has e.g.
<guest>
<os_type>hvm</os_type>
<arch name='x86_64'>
<wordsize>64</wordsize>
<emulator>/usr/bin/qemu-system-x86_64</emulator>
<machine>pc-0.11</machine>
<machine canonical='pc-0.11'>pc</machine>
<machine>pc-0.10</machine>
<machine>isapc</machine>
<domain type='qemu'>
</domain>
<domain type='kvm'>
<emulator>/usr/bin/kvm</emulator>
<machine>pc</machine>
<machine>isapc</machine>
</domain>
</arch>
</guest>
and start a guest with:
<domain type='kvm'>
...
<os>
<type arch='x86_64'>hvm</type>
...
</os>
</domain>
then the default machine type should be 'pc' and not 'pc-0.11'
Issue was reported by Anton Protopopov.
* src/capabilities.[ch]: pass the domain type to
virCapabilitiesDefaultGuestArch() and use it to look up the default
machine type from a specific guest domain if needed.
* src/conf/domain_conf.c, src/xen/xm_internal.c: update
* tests/qemuxml2argvdata/qemuxml2argv-machine-aliases2.xml: update
the domain type to 'kvm' and remove the machine type to check
that the default gets looked up correctly
Introduces several new public API options for migration
- VIR_MIGRATE_PEER2PEER: With this flag the client only
invokes the virDomainMigratePerform method, expecting
the source host driver to do whatever is required to
complete the entire migration process.
- VIR_MIGRATE_TUNNELLED: With this flag the actual data
for migration will be tunnelled over the libvirtd RPC
channel. This requires that VIR_MIGRATE_PEER2PEER is
also set.
- virDomainMigrateToURI: This is variant of the existing
virDomainMigrate method which does not require any
virConnectPtr for the destination host. Given suitable
driver support, this allows for all the same modes as
virDomainMigrate()
The URI for VIR_MIGRATE_PEER2PEER must be a valid libvirt
URI. For non-p2p migration a hypervisor specific migration
URI is used.
virDomainMigrateToURI without a PEER2PEER flag is only
support for Xen currently, and it involves XenD talking
directly to XenD, no libvirtd involved at all.
* include/libvirt/libvirt.h.in: Add VIR_MIGRATE_PEER2PEER
flag for migration
* src/libvirt_internal.h: Add feature flags for peer to
peer migration (VIR_FEATURE_MIGRATE_P2P) and direct
migration (VIR_MIGRATE_PEER2PEER mode)
* src/libvirt.c: Implement support for VIR_MIGRATE_PEER2PEER
and virDomainMigrateToURI APIs.
* src/xen/xen_driver.c: Advertise support for DIRECT migration
* src/xen/xend_internal.c: Add TODO item for p2p migration
* src/libvirt_public.syms: Export virDomainMigrateToURI
method
* src/qemu/qemu_driver.c: Add support for PEER2PEER and
migration, and adapt TUNNELLED migration.
* tools/virsh.c: Add --p2p and --direct args and use the
new virDomainMigrateToURI method where possible.
Re-arrange the doTunnelMigrate method putting all non-QEMU local
state setup steps first. This maximises chances of success before
then starting destination QEMU for receiving incoming migration.
Altogether this can reduce the number of goto cleanup labels to
something more managable.
* qemu/qemu_driver.c: Re-order steps in doTunnelMigrate
Simplify the doTunnelMigrate code by pulling out the code for
sending all tunnelled data into separate helper
* qemu/qemu_driver.c: introduce doTunnelSendAll() method
Simplify the doTunnelMigrate() method by pulling out the code
which opens/closes the virConnectPtr object into a parent
method
* qemu/qemu_driver.c: Add doPeer2PeerMigrate which then calls
doTunnelMigrate with dconn & dom_xml
virStreamAbort is needed when the caller wishes to terminate
the stream early, not when virStreamSend fails.
* qemu/qemu_driver.c: Fix calling of virStreamAbort during
tunnelled migration
The code for tunnelled migration was added in a dedicated method,
but the native migration code is still inline in the top level
qemudDomainMigratePerform() API. Move the native code out into
a dedicated method too to make things more maintainable.
* src/qemu/qemu_driver.c: Pull code for performing a native
QEMU migration out into separate method
The code for tunnelled migration wierdly required the app to pass
a NULL 'dconn' parameter, only to have to use virConnectOpen
itself shortly thereafter to get a 'dconn' object. Remove this
bogus check & require the app to always pas 'dconn' as before
* src/libvirt.c: Require 'dconn' for virDomainMigrate calls again
and remove call to virConnectOpen
Since virMigratePrepareTunnel() is used for migration over the
native libvirt connection, there is never any need to pass the
target URI to this method.
* daemon/remote.c, src/driver.h, src/libvirt.c, src/libvirt_internal.h,
src/qemu/qemu_driver.c, src/remote/remote_driver.c,
src/remote/remote_protocol.c, src/remote/remote_protocol.h,
src/remote/remote_protocol.x: Remove 'uri_in' parameter from
virMigratePrepareTunnel() method
Move the VIR_DRV_FEATURE* constants into libvirt_internal.h
since these flags are indicating whether APIs in the
libvirt_internal.h file are supported by a driver
* src/driver.h: Remove VIR_DRV_FEATURE* constants
* src/libvirt_internal.h: Add VIR_DRV_FEATURE* constants, using
an enum instead of #define
* src/internal.h: pull in libvirt_internal.h
* src/lxc/lxc.conf: new configuration file, there is currently one
tunable "log_with_libvirtd" that controls whether an lxc controller will
log only to the container log file, or whether it will honor libvirtd's
log output configuration. This provides a way to have libvirtd and its
children log to a single file. The default is to log to the container
log file.
* src/Makefile.am libvirt.spec.in: add the new file
* src/lxc/lxc_conf.[ch] src/lxc/lxc_driver.c: read the new log value
from the configuration file and pass the log informations when
starting up a container.
* src/lxc/lxc_driver.c src/lxc/lxc_controller.c: before launching the
lxc controller, have the lxc driver query the log settings and setup
envp[]. This provides the advantage of honoring the actual log
configuration instead of only what had been set in the environment.
The lxc controller now simply has to call virLogSetFromEnv().
When configuring logging settings, keep more information about the
output destination. Add accessors to retrieve the filter and output
settings in the original string form; this to be used to set up
environment for a child process that also logs.
* src/util/logging.[ch]: add virLogGetFilters and virLogGetOutputs
accessors and modify the internals (including virLogDefineOutput())
to save the data needed for the accessors
* src/util/util.[ch]: Add virFileAbsPath() function to ensure an
absolute path for a potentially realtive path.
* src/libvirt_private.syms: add it in libvirt private symbols
* configure.in: look for AppArmor and devel
* src/security/security_apparmor.[ch] src/security/security_driver.c
src/Makefile.am: add and plug the new driver
* src/security/virt-aa-helper.c: new binary which is used exclusively by
the AppArmor security driver to manipulate AppArmor.
* po/POTFILES.in: registers the new files
* tests/Makefile.am tests/secaatest.c tests/virt-aa-helper-test:
tests for virt-aa-helper and the security driver, secaatest.c is
identical to seclabeltest.c except it initializes the 'apparmor'
driver instead of 'selinux'
The patch implements the missing memory control APIs for lxc, i.e.,
domainGetMaxMemory, domainSetMaxMemory, domainSetMemory, and improves
domainGetInfo to return proper amount of used memory via cgroup.
* src/libvirt_private.syms: Export virCgroupGetMemoryUsage
and add missing virCgroupSetMemory
* src/lxc/lxc_driver.c: Implement missing memory functions
* src/util/cgroup.c, src/util/cgroup.h: Add the function
to get used memory
When James Morris originally submitted his sVirt patches (as seen in
libvirt 0.6.1), he did not require on disk labelling for
virSecurityDomainRestoreImageLabel. A later commit[2] changed this
behavior to assume on disk labelling, which halts implementations for
path-based MAC systems such as AppArmor and TOMOYO where
vm->def->seclabel is required to obtain the label.
* src/security/security_driver.h src/qemu/qemu_driver.c
src/security/security_selinux.c: adds the 'virDomainObjPtr vm'
argument back to *RestoreImageLabel
Add virNodeDeviceParseFile, and make virNodeDeviceParseNode non-static. These
will be used by the test driver.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Add a simple 'computer' device for the default driver. Only implement
the basic calls, no creation or destroy happening.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Fix migration, broken in two different ways by the QEMU monitor
abstraction. Note that the QEMU console emits a "\r\n" as the
line-ending.
* src/qemu/qemu_monitor_text.c (qemuMonitorGetMigrationStatus):
Fix "info migrate" command and its output's parsing.
Implementation of tunnelled migration, using a Unix Domain Socket
on the qemu backend. Note that this requires very new versions of
qemu (0.10.7 at least) in order to get the appropriate bugfixes.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
The upcoming tunnelled migration needs to be able to set
a migration in progress in the background, as well as
be able to cancel a migration when a problem has happened.
This patch allows for both of these to properly work.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
A simple misplaced break out of a switch results in:
libvir: error : Failed to open file '/sys/bus/pci/devices/0000:00:54c./vendor': No such file or directory
libvir: error : Failed to open file '/sys/bus/pci/devices/0000:00:54c./device': No such file or directory
libvir: error : this function is not supported by the hypervisor: Failed to read product/vendor ID for 0000:00:54c.
when trying to passthrough a USB host device to qemu.
* src/security_selinux.c: fix a switch/break thinko
* src/conf/domain_conf.c: a simple typo in an XML domain file could lead
to a crash, because we called STRPREFIX() on the looked up value without
checking it was non-null.
* src/conf/domain_conf.c: when declaring a <interface type="bridge">
tag, <source> needs a "bridge" attribute, but the parser complains
about a missing "dev" attribute.
* docs/schemas/domain.rng: allow one <description> tag in the top level
of the <domain> to store user information as text
* src/conf/domain_conf.c src/conf/domain_conf.h: extend the structure
to store this text, grab it at parse time and save it back when
present after <uuid>
Function comments for virStreamEvent{Add,Update,Remove}Callback() are
missing a trailing ':'. Therefore apibuild.py fails to parse the comment
and warns about the missing ':'.
* docs/libvirt-api.xml, docs/libvirt-refs.xml: updated by apibuild.py
* src/libvirt.c: add missing ':' in function comments
Use virStorageFileGetMetadata() to find any backing stores for images
and re-label them
Without this, qemu cannot access qcow2 backing files, see:
https://bugzilla.redhat.com/497131
* src/security/security_selinux.c: re-label backing store files in
SELinuxSetSecurityImageLabel()
Finally, we get to the point of all this.
Move virStorageGetMetadataFromFD() to virStorageFileGetMetadataFromFD()
and move to src/util/storage_file.[ch]
There's no functional changes in this patch, just code movement
* src/storage/storage_backend_fs.c: move code from here ...
* src/util/storage_file.[ch]: ... to here
* src/libvirt_private.syms: export virStorageFileGetMetadataFromFD()
Introduce a metadata structure and make virStorageGetMetadataFromFD()
fill it in.
* src/util/storage_file.h: add virStorageFileMetadata
* src/backend/storage_backend_fs.c: virStorageGetMetadataFromFD() now
fills in the virStorageFileMetadata structure
Prepare the code probing a file's format and associated metadata for
moving into libvirt_util.
* src/storage/storage_backend_fs.c: re-factor the format and metadata
probing code in preparation for moving it
Rename virStorageVolFormatFileSystem to virStorageFileFormat and
move to src/util/storage_file.[ch]
* src/Makefile.am: add src/util/storage_file.[ch]
* src/conf/storage_conf.[ch]: move enum from here ...
* src/util/storage_file.[ch]: .. to here
* src/libvirt_private.syms: update To/FromString exports
* src/storage/storage_backend.c, src/storage/storage_backend_fs.c,
src/vbox/vbox_tmpl.c: update for above changes
When using VNC for graphics + keyboard + mouse, we shouldn't
then use the host OS for audio. Audio should go back over
VNC.
When using SDL for graphics, we should use the host OS for
audio since that's where the display is. We need to allow
certain QEMU env variables to be passed through to guest
too to allow choice of QEMU audio backend.
* qemud/libvirtd.sysconf: Mention QEMU/SDL audio env vars
* src/qemu_conf.c: Passthrough QEMU/SDL audio env for SDL display,
disable host audio for VNC display
Defines the extensions to the remote protocol for generic
data streams. Adds a bunch of helper code to the libvirtd
daemon for working with data streams.
* daemon/Makefile.am: Add stream.c/stream.h to build
* daemon/stream.c, qemud/stream.h: Generic helper functions for
creating new streams, associating streams with clients, finding
existing streams for a client and removing/deleting streams.
* src/remote/remote_protocol.x: Add a new 'REMOTE_STREAM' constant
for the 'enum remote_message_type' for encoding stream data
in wire messages. Add a new 'REMOTE_CONTINUE' constant to
'enum remote_message_status' to indicate further data stream
messsages are expected to follow. Document how the
remote_message_header is used to encode data streams
* src/remote/remote_protocol.h: Regenerate
* daemon/dispatch.c: Remove assumption that a error message
sent to client is always type=REMOTE_REPLY. It may now
also be type=REMOTE_STREAM. Add convenient method for
sending outgoing stream data packets. Log and ignore
non-filtered incoming stream packets. Add a method for
serializing a stream error message
* daemon/dispatch.h: Add API for serializing stream errors
and sending stream data packets
* daemon/qemud.h: Add struct qemud_client_stream for tracking
active data streams for clients. Tweak filter function
operation so that it accepts a client object too.
* daemon/qemud.c: Refactor code for free'ing message objects
which have been fully transmitted into separate method.
Release all active streams when client shuts down. Change
filter function to be responsible for queueing the message
* include/libvirt/libvirt.h.in: Public API contract for
virStreamPtr object
* src/libvirt_public.syms: Export data stream APIs
* src/libvirt_private.syms: Export internal helper APIs
* src/libvirt.c: Data stream API driver dispatch
* src/datatypes.h, src/datatypes.c: Internal helpers for virStreamPtr
object
* src/driver.h: Define internal driver API for streams
* .x-sc_avoid_write: Ignore src/libvirt.c because it trips
up on comments including write()
* python/Makefile.am: Add libvirt-override-virStream.py
* python/generator.py: Add rules for virStreamPtr class
* python/typewrappers.h, python/typewrappers.c: Wrapper
for virStreamPtr
* docs/libvirt-api.xml, docs/libvirt-refs.xml: Regenerate
with new APIs
* src/qemu/qemu_monitor_text.c: Always print command and reply
in qemuMonitorCommandWithHandler. Print all args in each monitor
command API & remove redundant relpy printing
* src/qemu/qemu_monitor.h, src/qemu/qemu_monitor.c: Add new
qemuMonitorRemoveHostNetwork() command for removing host
networks
* src/qemu/qemu_driver.c: Convert NIC hotplug methods over
to use qemuMonitorRemoveHostNetwork()
* src/qemu/qemu_conf.h, src/qemu/qemu_conf.c: Remove prefix arg
from qemuBuildHostNetStr which is no longer required
* src/qemu/qemu_driver.c: Refactor to use qemuMonitorAddHostNetwork()
API for adding host network
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new
qemuMonitorAddHostNetwork() method for adding host networks
* src/qemu/qemu_conf.c: Remove separator from qemuBuildNicStr()
args, and remove hardcoded 'nic' prefix. Leave it upto callers
instead
* src/qemu/qemu_driver.c: Switch over to using the new
qemuMonitorAddPCINetwork() method for NIC hotplug
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new
qemuMonitorAddPCINetwork API for PCI network device hotplug
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new
qemuMonitorCloseFileHandle and qemuMonitorSendFileHandle
APIs for processing file handles
* src/qemu/qemu_driver.c: Convert NIC hotplug method over to
use qemuMonitorCloseFileHandle and qemuMonitorSendFileHandle
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new
API qemuMonitorAddPCIDisk()
* src/qemu/qemu_driver.c: Convert over to using the new
qemuMonitorAddPCIDisk() method, and remove now obsolete
qemudEscape() method
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new API
qemuMonitorRemovePCIDevice() for removing PCI device
* src/qemu/qemu_driver.c: Convert all places removing PCI devices
over to new qemuMonitorRemovePCIDevice() API
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new
API qemuMonitorAddPCIHostDevice()
* src/qemu/qemu_driver.c: Switch to using qemuMonitorAddPCIHostDevice()
for PCI host device hotplug
One API adds an exact device based on bus+dev, the other adds
any device matching vendor+product
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new
qemuMonitorAddUSBDeviceExact() and qemuMonitorAddUSBDeviceMatch()
commands.
* src/qemu/qemu_driver.c: Switch over to using the new
qemuMonitorAddUSBDeviceExact() and qemuMonitorAddUSBDeviceMatch()
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new
qemuMonitorAddUSBDisk() API
* src/qemu/qemu_driver.c: Switch USB disk hotplug to the new
src/qemu/qemu_driver.c API.
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new
qemuMonitorMigrateToCommand() API
* src/qemu/qemu_driver.c: Switch over to using the
qemuMonitorMigrateToCommand() API for core dumps and save
to file APIs
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new API
qemuMonitorMigrateToHost() for doing TCP migration
* src/qemu/qemu_driver.c: Convert to use qemuMonitorMigrateToHost().
Also handle proper URIs (tcp:// as well as tcp:)
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new
qemuMonitorGetMigrationStatus() command.
* src/qemu/qemu_driver.c: Use new qemuMonitorGetMigrationStatus()
command to check completion status.
* src/qemu/qemu_driver.c: Use new qemuMonitorSetMigrationSpeed()
API during migration
* src/qemu/qemu_monitor.h, src/qemu/qemu_monitor.c: Add new
qemuMonitorSetMigrationSpeed() API
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add a new
qemuMonitorGetBlockStatsInfo() command
* src/qemu/qemu_driver.c: Remove directly use of blockstats in
favour of calling qemuMonitorGetBlockStatsInfo()
* src/qemu/qemu_monitor.h, src/qemu/qemu_monitor.c: Add new APIs
qemuMonitorSaveVirtualMemory() and qemuMonitorSavePhysicalMemory()
* src/qemu/qemu_driver.c: Use the new qemuMonitorSaveVirtualMemory()
and qemuMonitorSavePhysicalMemory() APIs
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new APis
qemuMonitorChangeMedia and qemuMonitorEjectMedia. Pull in code
for qemudEscape
* src/qemu/qemu_driver.c: Remove code that directly issues 'eject'
and 'change' commands in favour of API calls.
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new
qemuMonitorSetBalloon() based on existing code in
qemudDomainSetMemoryBalloon
* src/qemu/qemu_driver.c: Remove use of qemudDomainSetMemoryBalloon()
in favour of qemuMonitorSetBalloon(). Fix error code when balloon
is not supported
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Pull old
qemudDomainGetMemoryBalloon() code into a new method called
qemuMonitorGetBalloonInfo()
* src/qemu/qemu_driver.c: Update to call qemuMonitorGetBalloonInfo()
and remove qemudDomainGetMemoryBalloon().
* src/qemu/qemu_driver.c: Remove use of 'system_powerdown'
* src/qemu/qemu_monitor.h, src/qemu/qemu_monitor.c: Add a new
qemuMonitorSystemPowerdown() api call
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add a new
qemuMonitorStopCPUs() API
* src/qemu/qemu_driver.c: Replace direct monitor commands for 'stop'
with qemuMonitorStopCPUs()
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Rename
Rename qemudMonitorSendCont to qemuMonitorStartCPUs
* src/qemu/qemu_driver.c: Update callers for new name
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add a
new qemuMonitorSetVNCPassword() API
* src/qemu/qemu_driver.c: Refactor qemudInitPasswords to
call qemuMonitorSetVNCPassword()
* src/qemu/qemu_monitor.h, src/qemu/qemu_monitor.c: Add a new
qemuMonitorGetCPUInfo() command
* src/qemu/qemu_driver.c: Refactor qemudDetectVcpuPIDs to
use qemuMonitorGetCPUInfo()
Pull out all the QEMU monitor interaction code to a separate
file. This will make life easier when we need to drop in a
new implementation for the forthcoming QMP machine friendly
monitor support.
Next step is to add formal APIs for each monitor command,
and remove direct commands for sending/receiving generic
data.
* src/Makefile.am: Add qemu_monitor.c to build
* src/qemu/qemu_driver.c: Remove code for monitor interaction
* src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h: New
file for monitor interaction
* po/POTFILES.in: Add src/qemu/qemu_monitor_text.c
* src/conf/interface_conf.c: This was causing subsequent calls to
virXPathxxx() to fail, since ctxt->node was left pointing at the
dhcp node, rather than the protocol node.
* src/util/xml.c: The virXPath... function take extra care to preserve
the XPath context node (ctxt->node) but in the case of virXPathString
and virXPathBoolean they forgot to do this on the error path. This
patch fixes this and move all ctxt->node = relnode instuctions just
after the xmlXPathEval() to make sure this doesn't happen if this code
is modified.
The python method help docs are copied across from the C
funtion comments, but in the process all line breaks and
indentation was being lost. This made the resulting text
and code examples completely unreadable. Both the API
doc extractor and the python generator were destroying
whitespace & this fixes them to preserve it exactly.
* docs/apibuild.py: Preserve all whitespace when extracting
function comments. Print function comment inside a <![CDATA[
section to fully preserve all whitespace. Look for the
word 'returns' to describe return values, instead of 'return'
to avoid getting confused with code examples including the
C 'return' statement.
* python/generator.py: Preserve all whitespace when printing
function help docs
* src/libvirt.c: Change any return parameter indicated by
'return' to be 'returns', to avoid confusing the API extractor
* docs/libvirt-api.xml: Re-build for fixed descriptions
An inaccessible datastore has no valid URL property so don't
access its URI property.
* src/esx/esx_vi.c: esxVI_LookupDatastoreByName(): check if datastore is
accessible before accessing its URL property
* src/esx/esx_vmx.c: update to changed datastore properties
A given domain XML gets converted to a VMX config, uploaded to the host
and registered as new virtual machine.
* src/esx/esx_driver.c: refactor datastore related path parsing into
esxUtil_ParseDatastoreRelatedPath()
* src/esx/esx_util.[ch]: add esxUtil_ParseDatastoreRelatedPath()
* src/esx/esx_vi.[ch]: add esxVI_Context_UploadFile(), add datastores to
the traversal in esxVI_BuildFullTraversalSpecList(), add
esxVI_LookupDatastoreByName()
* src/esx/esx_vi_methods.[ch]: add esxVI_RegisterVM_Task()
* src/esx/esx_vi_types.c: make some error message more verbose
* src/esx/esx_vmx.[ch]: add esxVMX_AbsolutePathToDatastoreRelatedPath()
to convert a path into a datastore related path, add esxVMX_ParseFileName()
to convert from VMX path format to domain XML path format, extend the other
parsing function to be datastore aware, add esxVMX_FormatFileName() to
convert from domain XML path format to VMX path format, fix VMX ethernet
entry formating
* tests/esxutilstest.c: add test for esxUtil_ParseDatastoreRelatedPath()
* tests/vmx2xmldata/*: update domain XML files to use datastore related paths
* tests/xml2vmxdata/*: update domain XML files to use datastore related paths,
update VMX files to use absolute paths
Add esxVI_Occurence enum to describe expected occurence of items
* src/esx/esx_driver.c: update the use of esxVI_LookupVirtualMachineByUuid()
* src/esx/esx_vi.c: add an esxVI_Occurence parameter to
esxVI_LookupVirtualMachineByUuid() and take care if esxVI_FindByUuid()
can't find anything for a given uuid
* src/esx/esx_vi.h: add esxVI_Occurence enum
* src/esx/esx_vi_methods.c: expect null or more items to be returned
from esxVI_FindByUuid()
* src/esx/esx_driver.c: add esxSupportsLongMode() and update esxCapsInit()
* src/esx/esx_vi.[ch]: Add AnyType handling for lists
* src/esx/esx_vi_types.c: bind VI type HostCpuIdInfo
Extend and cleanup the VMX to domain XML mapping. Add the domain XML to
VMX mapping functions.
* src/esx/esx_driver.c: add esxDomainXMLToNative()
* src/esx/esx_vmx.[ch]: add esxVMX_SCSIDiskNameToControllerAndID(),
esxVMX_IDEDiskNameToControllerAndID(), esxVMX_FloppyDiskNameToController(),
esxVMX_GatherSCSIControllers(), add basic handling for the VMX guestOS entry
to distinguish between i686 and x86_64, make SCSI virtualDev VMX entry
optional as it should be, map the VMX networkName entry to the domain XML
interface bridge name, add basic mapping for serial devices in pipe mode,
add several esxVMX_Format*() functions
This enables the auth callback to automatically distinguish between
requests for ESX host and vCenter credentials.
* src/esx/esx_util.[ch]: set challenge for auth callback to hostname
* src/esx/esx_driver.c: add esxNodeGetFreeMemory(), cache IP address
* src/esx/esx_vi.[ch]: refactor resource pool query into esxVI_GetResourcePool()
* src/esx/esx_vi_types.[ch]: bind VI type ResourcePoolResourceUsage
Currently, libvirtd will start a dnsmasq process for the virtual
network, but (aside from killing the dnsmasq process and replacing it),
there's no way to define tftp boot options.
This change introduces the appropriate tags to the dhcp configuration:
<network>
<name>default</name>
<bridge name="virbr%d" />
<forward/>
<ip address="192.168.122.1" netmask="255.255.255.0">
<tftp root="/var/lib/tftproot" />
<dhcp>
<range start="192.168.122.2" end="192.168.122.254" />
<bootp file="pxeboot.img"/>
</dhcp>
</ip>
</network>
When the attributes are present, these are passed to the
arguments to dnsmasq:
dnsmasq [...] --enable-tftp --tftp-root /srv/tftp --dhcp-boot pxeboot.img
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ^^^^^^^^^^^^^^^^^^^^^^^
from <tftp /> from <bootp />
At present, only local tftp servers are supported (ie, dnsmasq runs as
the tftp server), but we could improve this in future by adding a
server= attribute.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2009-09-21 Paolo Bonzini <pbonzini@redhat.com>
Jeremy Kerr <jk@ozlabs.org>
* docs/formatnetwork.html.in: Document new tags.
* docs/formatnetwork.html: Regenerate.
* docs/schemas/network.rng: Update.
* src/network_conf.c (virNetworkDefFree): Free new fields.
(virNetworkDHCPRangeDefParseXML): Parse <bootp>.
(virNetworkIPParseXML): New, parsing <dhcp> and <tftp>.
(virNetworkDefParseXML): Use virNetworkIPParseXML instead of
virNetworkDHCPRangeDefParseXML.
(virNetworkDefFormat): Pretty print new fields.
* src/network_conf.h (struct _virNetworkDef): Add netboot fields.
* src/network_driver.c (networkBuildDnsmasqArgv): Add
TFTP and BOOTP arguments.
* tests/Makefile.am (EXTRA_DIST): Add networkschemadata.
* tests/networkschematest: Look in networkschemadata.
* tests/networkschemadata/netboot-network.xml: New.
Add the virStrncpy function, which takes a dst string, source string,
the number of bytes to copy and the number of bytes available in the
dest string. If the source string is too large to fit into the
destination string, including the \0 byte, then no data is copied and
the function returns NULL. Otherwise, this function copies n bytes
from source into dst, including the \0, and returns a pointer to the
dst string. This function is intended to replace all unsafe uses
of strncpy in the code base, since strncpy does *not* guarantee that
the buffer terminates with a \0.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
Latest upstream QEMU can be built with Xen support, which introduces
a -xen-domid argument. This was mistakenly detected as -domid due
to old Xenner support. Adapt to cope with both syntax. Also only
set domid if the virt type is xen, or the guest type is xen
* src/qemu_conf.c, src/qemu_conf.h: Detect new -xen-domid flag in
preference to -domid.
* tests/qemuxml2argvdata/qemuxml2argv-bootloader.args,
tests/qemuxml2argvdata/qemuxml2argv-input-xen.args: Add missing
-domid param
* tests/qemuxml2argvdata/qemuxml2argv-misc-uuid.args: Remove bogus
-boot param.
* tests/qemuxml2argvtest.c: Add missing QEMUD_CMD_FLAG_DOMID params
The commit cb51aa48a7 "Fix up connection
reference counting." changed the driver closing and virConnectPtr
unref-logic in virConnectClose().
Before this commit virConnectClose() closed all drivers of the given
virConnectPtr and virUnrefConnect()'ed it afterwards. After this
commit the driver-closing is done in virUnrefConnect() if and only if
the ref-count of the virConnectPtr dropped to zero.
This change in execution order leads to a virConnectPtr leak, at least
for connections to Xen.
The relevant call sequences:
virConnectOpen() -> xenUnifiedOpen() ...
... xenInotifyOpen() -> virConnectRef(conn)
... xenStoreOpen() -> xenStoreAddWatch() -> conn->refs++
virConnectClose() -> xenUnifiedClose() ...
... xenInotifyClose() -> virUnrefConnect(conn)
... xenStoreClose() -> xenStoreRemoveWatch() -> virUnrefConnect(conn)
Before the commit this additional virConnectRef/virUnrefConnect calls
where no problem, because virConnectClose() closed the drivers
explicitly and the additional refs added by the Xen subdrivers were
removed properly. After the commit this additional refs result in a
virConnectPtr leak (including a leak of the hypercall file handle;
that's how I noticed this problem), because now the drivers are only
close if and only if the ref-count drops to zero, but this cannot
happen anymore, because the additional refs from the Xen subdrivers
would only be removed if the drivers get closed, but that doesn't
happen because the ref-count cannot drop to zero.
The fix for this problem is simple: remove the
virConnectRef/virUnrefConnect calls from the Xen subdrivers (see
attached patch). Maybe someone could explain why the Xen Inotify and
Xen Store driver do this extra ref-counting, but none of the other Xen
subdrivers. It seems unnecessary to me and can be removed without
problems.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
* src/conf/domain_conf.c: Don't assume all virDomainObjPtr have
a non-NULL monitor_chr field in virDomainObjFormat.
* src/lxc/lxc_driver.c: Implement suspend/resume driver APis
* src/util/cgroup.c, src/util/cgroup.h: Support the 'freezer'
cgroup controller
* src/libvirt_private.syms: Export virCgroupSetFreezerState
and virCgroupGetFreezerState
When making changes to the remote protocol, src/ is always built
first, so rpcgen should live there, to avoid having to run make
in the 'daemon/' directory before building src/
* src/Makefile.am: Add rules for rpcgen, and drop -I../daemon from
remote client build
* daemon/Makefile.am: Add -I../src/remote/ to libvirtd build
and remove rpcgen rules
* daemon/libvirtd.c: Adapt include of remote_driver.h taking
into account new -I flag
* daemon/remote_protocol.c, daemon/remote_protocol.h,
daemon/remote_protocol.x: Move to src/remote/
* daemon/rpcgen_fix.pl: Move to src/remote/rpcgen_fix.pl
* src/capabilities.c, src/capabilities.h, src/domain_conf.c,
src/domain_conf.h, src/domain_event.c, src/domain_event.h,
src/interface_conf.c, src/interface_conf.h,
src/network_conf.c, src/network_conf.h, src/node_device_conf.c,
src/node_device_conf.h, src/secret_conf.c, src/secret_conf.h,
src/storage_conf.c, src/storage_conf.h, src/storage_encryption_conf.c,
src/storage_encryption_conf.h: Move to src/conf/
* src/Makefile.am: Add -Isrc/conf to the individual build targets
which need to use XML config APIs. Remove LIBXML_CFLAGS, LIBSSH2_CFLAGS
and SELINUX_CFLAGS from global INCLUDES and only have them in build
targets which actually need them. Create a libvirt_conf.la
convenience library for all config parsers
* src/hostusb.h: Remove bogus include of domain_conf.h
* tests/Makefile.am: Add -Isrc/conf. Remove bogus -I$builddir/src
since it never has any generated header files
* daemon/Makefile.am: Add -Isrc/conf
* proxy/Makefile.am: Add -Isrc/conf and cope with renamed files
* src/hash.c: Remove bogus include of libxml/threads.h
* daemon/default-network.xml: Move to src/network/default.xml
* daemon/libvirtd_qemu.aug, daemon/test_libvirtd_qemu.aug: Move
to src/qemu/
* src/qemu.conf: Move to src/qemu/qemu.conf
* daemon/Makefile.am: Remove rules for default-nmetwork.xml and
libvirtd_qemu.aug and test_libvirtd_qemu.aug. Fix typo in
uninstall-local that would install polkit again.
* src/Makefile.am: Add rules for installing network/default.xml
and the qemu/*.aug files. Add test case for QEMU augeas files.
Add uninstall-local rule for files/directories created during
install. Rename install-exec-local to install-data-local.
Only install qemu.conf if WITH_QEMU is set.
* tests/networkschematest: Update for XML location move
Move the virsh tool and its man page into the tools directory
* Makefile.am: Remove rules for virsh.1 man page
* virsh.1: Remove auto-generated file
* docs/Makefile.am: Remove rules for virsh.pod man page
* docs/virsh.pod: Move to tools/ directory
* src/Makefile.am, src/.gitignore: Remove rules for virsh
* src/console.c, src/console.h, src/*.ico, src/virsh_win_icon.rc,
src/virsh.c: Move into tools/ directory
* tools/Makefile.am: Add rules for building virsh
* tools/.gitignore: Ignore virsh built files
* tests/virshtest.c, tests/int-overflow: Update for new
virsh location
When we hot-unplug the last device, we're currently double-freeing
the device definition.
Reported by Martin Banas here:
https://bugzilla.redhat.com/523953
* src/qemu_driver.c: fix double free
* include/libvirt/libvirt.h, include/libvirt/libvirt.h.in: Add
virSecretGetUsageType, virSecretGetUsageID and virLookupSecretByUsage
* python/generator.py: Mark virSecretGetUsageType, virSecretGetUsageID
as not throwing exceptions
* qemud/remote.c: Implement dispatch for virLookupSecretByUsage
* qemud/remote_protocol.x: Add usage type & ID as attributes of
remote_nonnull_secret. Add RPC calls for new public APIs
* qemud/remote_dispatch_args.h, qemud/remote_dispatch_prototypes.h,
qemud/remote_dispatch_ret.h, qemud/remote_dispatch_table.h,
qemud/remote_protocol.c, qemud/remote_protocol.h: Re-generate
* src/datatypes.c, src/datatypes.h: Add usageType and usageID as
properties of virSecretPtr
* src/driver.h: Add virLookupSecretByUsage driver entry point
* src/libvirt.c: Implement virSecretGetUsageType, virSecretGetUsageID
and virLookupSecretByUsage
* src/libvirt_public.syms: Export virSecretGetUsageType, virSecretGetUsageID
and virLookupSecretByUsage
* src/remote_internal.c: Implement virLookupSecretByUsage entry
* src/secret_conf.c, src/secret_conf.h: Remove the
virSecretUsageType enum, now in public API. Make volume
path mandatory when parsing XML
* src/secret_driver.c: Enforce usage uniqueness when defining secrets.
Implement virSecretLookupByUsage api method
* src/virsh.c: Include usage for secret-list command
Convert all the secret/storage encryption APIs / wire format to
handle UUIDs in raw format instead of non-canonical printable
format. Guarentees data format correctness.
* docs/schemas/storageencryption.rng: Make UUID mandatory for a secret
and validate fully
* docs/schemas/secret.rng: Fully validate UUID
* include/libvirt/libvirt.h, include/libvirt/libvirt.h.in, Add
virSecretLookupByUUID and virSecretGetUUID. Make
virSecretGetUUIDString follow normal API design pattern
* python/generator.py: Skip generation of virSecretGetUUID,
virSecretGetUUIDString and virSecretLookupByUUID
* python/libvir.c, python/libvirt-python-api.xml: Manual impl
of virSecretGetUUID,virSecretGetUUIDString and virSecretLookupByUUID
* qemud/remote.c: s/virSecretLookupByUUIDString/virSecretLookupByUUID/
Fix get_nonnull_secret/make_nonnull_secret to use unsigned char
* qemud/remote_protocol.x: Fix remote_nonnull_secret to use a
remote_uuid instead of remote_nonnull_string for UUID field.
Rename REMOTE_PROC_SECRET_LOOKUP_BY_UUID_STRING to
REMOTE_PROC_SECRET_LOOKUP_BY_UUID_STRING and make it take an
remote_uuid value
* qemud/remote_dispatch_args.h, qemud/remote_dispatch_prototypes.h,
qemud/remote_dispatch_ret.h, qemud/remote_dispatch_table.h,
qemud/remote_protocol.c, qemud/remote_protocol.h: Re-generate
* src/datatypes.h, src/datatypes.c: Store UUID in raw format instead
of printable. Change virGetSecret to use raw format UUID
* src/driver.h: Rename virDrvSecretLookupByUUIDString to
virDrvSecretLookupByUUID and use raw format UUID
* src/libvirt.c: Add virSecretLookupByUUID and virSecretGetUUID
and re-implement virSecretLookupByUUIDString and
virSecretGetUUIDString in terms of those
* src/libvirt_public.syms: Add virSecretLookupByUUID and
virSecretGetUUID
* src/remote_internal.c: Rename remoteSecretLookupByUUIDString
to remoteSecretLookupByUUID. Fix typo in args for
remoteSecretDefineXML impl. Use raw UUID format for
get_nonnull_secret and make_nonnull_secret
* src/storage_encryption_conf.c, src/storage_encryption_conf.h:
Storage UUID in raw format, and require it to be present in
XML. Use UUID parser to validate.
* secret_conf.h, secret_conf.c: Generate a UUID if none is provided.
Storage UUID in raw format.
* src/secret_driver.c: Adjust to deal with raw UUIDs. Save secrets
in a filed with printable UUID, instead of base64 UUID.
* src/virsh.c: Adjust for changed public API contract of
virSecretGetUUIDString.
* src/storage_Backend.c: DOn't undefine secret we just generated
upon successful volume creation. Fix to handle raw UUIDs. Generate
a non-clashing UUID
* src/qemu_driver.c: Change to use lookupByUUID instead of
lookupByUUIDString
* configure.in: Only define WITH_SECRETS if libvirtd is present
* src/Makefile.am: Only build secrets driver if WITH_SECRETS is
defined. Always add SECRET_DRIVER_SOURCES to EXTRA_DIST
Integrate with QEMU monitor to provide encryption passphrase when
starting a guest using encrypted qcow volumes
* src/qemu_driver.c (findDomainDiskEncryption,
findVolumeQcowPassphrase,
qemudMonitorSendVolumePassphrase, qemudMonitorSendCont): Send a volume
passphrase if qemu asks for it.
If the <encryption format='qcow'> element does not specify a secret
during volume creation, generate a suitable secret and add it to the
<encryption> tag. The caller can view the updated <encryption> tag
using virStorageVolGetXMLDesc().
Similarly, when <encryption format='default'/> is specified while
creating a qcow or qcow2-formatted volume, change the format to "qcow"
and generate a secret as described above.
* src/storage_encryption_conf.h (VIR_STORAGE_QCOW_PASSPHRASE_SIZE,
virStorageGenerateQcowPasphrase),
src/storage_encryption_conf.c (virStorageGenerateQcowPasphrase),
src/libvirt_private.syms: Add virStorageGenerateQcowPasphrase().
* src/storage_backend.c (virStoragegenerateQcowEncryption,
virStorageBackendCreateQemuImg): Generate a passphrase and
<encryption> when creating a qcow-formatted encrypted volume and the
user did not supply the information.
This implementation stores the secrets in an unencrypted text file,
for simplicity in implementation and debugging.
(Symmetric encryption, e.g. using gpgme, will not be difficult to add.
Because the TLS private key used by libvirtd is stored unencrypted,
encrypting the secrets file does not currently provide much additional
security.)
* include/libvirt/virterror.h, src/virterror.c (VIR_ERR_NO_SECRET): New
error number.
* po/POTFILES.in, src/Makefile.am: Add secret_driver.
* bootstrap: Use gnulib's base64 module.
* src/secret_driver.c, src.secret_driver.h, src/libvirt_private.syms:
Add local secret driver.
* qemud/qemud.c (qemudInitialize): Use the local secret driver.
Add a <secret> XML handling API, separate from the local driver, to
avoid manually generating XML in other parts of libvirt.
* src/secret_conf.c, src/secret_conf.h: New files.
* po/POTFILES.in, src/Makefile.am: Add secret_conf.
Add a VIR_SECRET_GET_VALUE_INTERNAL_CALL flag value, replacing the
originally separate libvirt_internal_call parameter. The flag is used
to differentiate external virSecretGetValue() calls from internal calls
by libvirt drivers that need to use the secret even if it is private.
* src/libvirt_internal.h Remove VIR_DOMAIN_XML_FLAGS_MASK
* src/driver.h Add VIR_SECRET_GET_VALUE_FLAGS_MASK constant and
VIR_SECRET_GET_VALUE_INTERNAL_CALL. Re-add the
VIR_DOMAIN_XML_FLAGS_MASK constant
* src/libvirt.c (virSecretGetValue): Don't allow the user to specify
internal flags.
Remove the bogus dependancy between node_device.c & storage_backend.c
by moving the virWaitForDevices into util.h where it can be shared
safely
* src/storage_backend_disk.c, src/storage_backend_logical.c,
src/storage_backend_mpath.c, src/storage_backend_scsi.c: Replace
virStorageBackendWaitForDevices with virFileWaitForDevices
* src/storage_backend.c, src/storage_backend.h: Remove
virStorageBackendWaitForDevices, virWaitForDevices
* src/util.h, src/util.c: Add virFileWaitForDevices
* configure.in: Move xmlrpc check further down after pkgconfig
is detected
* src/Makefile.am: Add missing XMLRPC_CFLAGS/LIBS to opennebula
* src/libvirt_private.syms: Add many missing exports
The interface allows qemudMonitorSendCont() to report errors that are
not overridden by its callers.
Also fix a potential infinite loop in qemuDomainCoreDump() if sending
cont repeatedly fails.
* src/qemu_driver.c (qemudMonitorSendCont): New function.
(qemudAutostartConfigs): Reset error before each call to
qemudStartVMDaemon().
(qemudInitCpus, qemudDomainResume, qemudDomainCoreDump,
qemudDomainRestore, qemudDomainMigratePerform,
qemudDomainMigrateFinish2): Use qemudMonitorSendCont().
* src/security_selinux.c: Use virReportSystemError whereever an
errno is involved
* src/qemu_driver.c: Don't overwrite error message from the
security driver
* src/security.h: Driver API for relabelling host devices
* src/security_selinux.c: Implement relabelling of PCI and USB
devices
* src/qemu_driver.c: Relabel USB/PCI devices before hotplug
Fix all thread locking bugs reported by object-locking test
case.
NB, some of the driver locking is getting too coarse. Driver
mutexes really need to be turned into RW locks instead to
significantly increase concurrency.
* src/lxc_driver.c: Fix useof driver when unlocked in the methods
lxcDomainGetInfo, lxcSetSchedulerParameters, and
lxcGetSchedulerParameters
* src/opennebula/one_driver.c: Fix missing unlock in oneDomainUndefine.
Fix use of driver when unlocked in oneDomainGetInfo,
oneGetOSType, oneDomainShutdown
* src/qemu_driver.c: Fix use of driver when unlocked in
qemudDomainSavem, qemuGetSchedulerType, qemuSetSchedulerParameters
and qemuGetSchedulerParameters
* src/storage_driver.c: Re-work storagePoolCreate to avoid bogus
lock checking warning. Re-work storageVolumeCreateXMLFrom to
remove a potential NULL de-reference & avoid bogus lock check
warnings
* src/test.c: Remove testDomainAssignDef since it break lock chekc
warnings.
* tests/object-locking.ml: Add oneDriverLock, oneDriverUnlock
and one_driver_t methods/types to allow lock checking on the
OpenNebula drivers
The algorithm is quite simple:
If the emulator matches a guest's domain:
if domain has machine type info:
check the domain's machine type info
else
check the guest's default machine type info
else if the emulator matches the guest's default emulator:
check the guest's default machine type info
The previous implementation was incorrectly falling back to the default
machine type info if the domain's machine type info didn't have an
alias.
* src/qemu_driver.c: simplify and fix qemudCanonicalizeMachine()
Currently we only probe the main qemu binary for machine types, but we
should also probe the kvm binary.
* src/qemu_conf.c: probe kvm binary machines in qemudCapsInitGuest()
We need to look at all the domain infos in guest capabilities, not
just the defaults.
In order to allow that, split out a qemudGetOldMachinesFromInfo()
from qemudGetOldMachines(). We'll make more use of it in the next
patch.
* src/qemu_conf.c: split out qemudGetOldMachinesFromInfo() from
qemudGetOldMachines()
This doesn't have any affect on the current tests because we don't have
any machine aliases in the current test data.
* src/qemu_conf.h, src/qemu_driver.c: expose qemudCanonicalizeMachine()
for the tests
* tests/qemuxml2argvtest.c: canonicalize the machine type
After the mentioned patch was applied, I noticed that
shutting down a kvm guest from inside (i.e. poweroff) caused
the guest to shutdown, but not removed from the list of
active guests. DanB pointed out that the problem is that
the virEventAddHandle() call in the qemu driver was asking
to watch for 0 events, not HANGUP | ERROR as it should. Add
these events so that shutdown works again.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
lzop was removed due to some confusion over whether it provided functional
advantages distinct from xz. This has been addressed in the mailing list post
archived at http://permalink.gmane.org/gmane.comp.emulators.libvirt/16487, and
support for lzop is re-added here.
* libvirt.spec.in: add dependancy on lzop
* src/qemu.conf: update documentation of save_image_format
* src/qemu_driver.c: re-add lzop compression option
* src/qemu_driver.c: drop lzma and lzop images compression options
as they are deprecated by xz
* libvirt.spec.in: add requires for xz/bzip2/gzip as they are needed
to implement the compression options
* src/qemu_driver.c (QEMUD_SAVE_FORMAT_LAST): Define.
(qemudSaveCompressionTypeFromString): Declare.
(qemudSaveCompressionTypeToString): Declare.
(qemudDomainSave): Use those functions rather than open-coding them.
Use "cat >> '%s' ..." in place of equivalent
"dd of='%s' oflag=append conv=notrunc ...".
* src/qemu_driver.c (enum qemud_save_formats) [QEMUD_SAVE_FORMAT_XZ]:
New member.
[QEMUD_SAVE_FORMAT_LZMA]: Mark as deprecated.
Use an explicit value for each member.
(qemudDomainSave, qemudDomainRestore): Handle the new member.
* src/qemu.conf: Mention xz, too.
* configure.in src/Makefile.am src/storage_backend.[ch]
src/storage_conf.[ch] src/storage_backend_mpath.[ch] po/POTFILES.in:
add a new module for storage multipath, it requires device-mapper
* src/xm_internal.c (xenXMDomainConfigParse): After t=strchr...
don't test *t; it's known. This was *not* detected by clang,
but I spotted it since once instance was in the vicinity of the
dead increment of "data".
* src/vbox/vbox_tmpl.c: minor bug in selecting the graphics type. if the
graphics type was desktop it was assumed that display is set for it,
and thus crashed on strdup. Also adds a number of missing OOM checks.
* src/lxc_container.c (lxcContainerMountBasicFS): Don't leak upon failure.
Add "cleanup:" label and change each post-allocation failure to
use "goto cleanup" rather than returning immediately.
* src/qemu_conf.c (qemuBuildHostNetStr): Do not remove the type_sep=','
dead store, since not having it would be a problem if we ever add a
new attribute=VAL option.
* src/esx/esx_vi.[ch]: convert esxVI_RemoteRequest_Execute() to a
simpler esxVI_Context_Execute() version, remove esxVI_RemoteRequest
and convert esxVI_RemoteResponse to esxVI_Response
* src/esx/esx_vi_methods.c: update and simplify callers to use
esxVI_Context_Execute() instead of esxVI_RemoteRequest_Execute()
* src/esx/esx_vi.[ch]: use virXPathNode*() in
esxVI_RemoteRequest_Execute() and remove
esxVI_RemoteResponse_DeserializeXPathObject*()
* src/esx/esx_vi_methods.c: update callers to use the new syntax of
esxVI_RemoteRequest_Execute()
* src/esx/esx_driver.c: add configStatus to the requested properties
to check it in esxVI_GetVirtualMachineIdentity()
* src/esx/esx_vi.[ch]: add esxVI_GetManagedEntityStatus()
and use it in esxVI_GetVirtualMachineIdentity()
* src/esx/esx_vi_types.[ch]: add VI type esxVI_ManagedEntityStatus
* src/esx/esx_driver.c: handle spaces in VMX file path and use a
virBuffer to encode spaces correctly in the resulting URL
* src/esx/esx_vi.c: include the URL in the error message in case
of a download error
* configure.in src/Makefile.am: change detection and flags
* src/phyp/phyp_driver.c src/phyp/phyp_driver.h: connection now
need to be done as part of the driver code, cleaned up by DV
* src/qemu_driver.c: Free the vm->monitor_chr field at VM shutdown.
Unlink the UNIX domain socket at VM shutdown to avoid littering
FS with old sockets
Separate the guest created QEMU monitor socket location
from the libvirtd create XML / PID data files, to improve
security separation when running QEMU non-root
* libvirt.spec.in: Leave /var/run/libvirt/qemu as root:root
* src/qemu_conf.h: Add libDir and cacheDir directory paths
* src/qemu_driver.c: Move QEMU monitor socket from
stateDir to libDir to avoid making security critical directory
accessible to QEMU guests.
* src/util.c: Delay running hook till after damonizing to
ensure pidfile is still written before changing UID/GID
* src/openvz_conf.c (openvzReadNetworkConf): Initialize "net".
Otherwise, upon openvzRead... failure, we would "goto error;"
where an uninitialized "net" could be dereferenced.
* src/test.c (testOpenVolumesForPool): Upon early virAsprintf or
virXPathNodeSet failure, "goto error" would take us to
virStorageVolDefFree(def), but with "def" not defined.
Initialize it to NULL.
* src/storage_backend.c: Include "internal.h".
(virStorageBackendCopyToFD): Mark inputvol parameter as "nonnull".
Remove test for non-NULL inputvol. Both callers ensure it's non-NULL.
* src/libvirt.c (virStoragePoolSetAutostart): Return -1 if the pool
argument is invalid, rather than "goto error" where we could dereference
that possibly-NULL "pool".
(virConnectFindStoragePoolSources): Likewise.
(virConnectNumOfDomains): Likewise.
Daniel P. Berrange spotted that the two latter functions
needed the same treatment.
* docs/schemas/domain.rng: Add <serial> element to disks
* src/domain_conf.h, src/domain_conf.c: XML parsing and
formatting for disk serial numbers
* src/qemu_conf.c: Set serial number when launching guests
* tests/qemuxml2argvdata/qemuxml2argv-disk-drive-shared.args,
tests/qemuxml2argvdata/qemuxml2argv-disk-drive-shared.xml: Add
serial number to XML test
Add option to domain XML for
<memoryBacking>
<hugepages/>
</memoryBacking>
* configure.in: Add check for mntent.h
* qemud/libvirtd_qemu.aug, qemud/test_libvirtd_qemu.aug, src/qemu.conf
Add 'hugetlbfs_mount' config parameter
* src/qemu_conf.c, src/qemu_conf.h: Check for -mem-path flag in QEMU,
and pass it when hugepages are requested.
Load hugetlbfs_mount config parameter, search for mount if not given.
* src/qemu_driver.c: Free hugetlbfs_mount/path parameter in driver shutdown.
Create directory for QEMU hugepage usage, chowning if required.
* docs/formatdomain.html.in: Document memoryBacking/hugepages elements
* docs/schemas/domain.rng: Add memoryBacking/hugepages elements to schema
* src/util.c, src/util.h, src/libvirt_private.syms: Add virFileFindMountPoint
helper API
* tests/qemuhelptest.c: Add -mem-path constants
* tests/qemuxml2argvtest.c, tests/qemuxml2xmltest.c: Add tests for hugepage
handling
* tests/qemuxml2argvdata/qemuxml2argv-hugepages.xml,
tests/qemuxml2argvdata/qemuxml2argv-hugepages.args: Data files for
hugepage tests
* tests/testutils.c: Run test function twice, once to prime it for
static allocations, once to count the non-static allocations.
* tests/testutilsqemu.c: Initialize variable correctl
* src/capabilities.c: Don't free machines variable upon failure
since caller must do that
* src/xm_internal.c: Add missing check for OOM in building VIF
config param
* docs/schemas/domain.rng: augment the video model with an optional
acceleration element with optional accel2d and accel3d flags
* src/domain_conf.c src/domain_conf.h: exten the virDomainVideoDef
structure with an optional accel field, virDomainVideoAccelDefParseXML
and virDomainVideoAccelDefFormat functions to parse and serialize
the structure.
Paolo Bonzini points out that in my refactoring of the code for
virDomainMigrate(), I added a check for the return value from
virDomainMigratePerform(). The problem is that we don't want to
exit if we fail, we actually want to go on and do
virDomainMigrateFinish2() with a non-0 return code to clean things
up. Remove the check.
While reproducing this issue, I also noticed that we wouldn't
always properly propagate an error message. In particular, I
found that if you blocked off the migration ports (with iptables)
and then tried the migration, it would actually fail but we would
get no failure output from Qemu. Therefore, we would think we
succeeded, and leave a huge mess behind us. Execute the monitor
command "info migrate", and look for a failure string in there
as well.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
* src/esx/esx_util.c: esxUtil_ParseQuery() warns if a known query
parameter should be ignored due to the corresponding char/int pointer
being NULL, instead of silently ignoring it. Fix the control flow.
* src/esx/esx_vmx.c: add an extra type of addressType beside 'static'
and 'generated', 'vpx' indicates that the MAC address was generated
by a vCenter.
Calling qsort() on the disks array causes disk to be
unneccessarily re-ordered, potentially breaking the
ability to boot if the boot disk gets moved later in
the list. The new algorithm will insert a new disk as
far to the end of the list as possible, while being
ordered correctly wrt other disks on the same bus.
* src/domain_conf.c, src/domain_conf.h: Remove disk sorting
routines. Add API to insert a disk into existing list at
the optimal position, without resorting disks
* src/libvirt_private.syms: Export virDomainDiskInsert
* src/xend_internal.c, src/xm_internal.c: Remove calls to
qsort, use virDomainDiskInsert instead.
* src/qemu_driver.c: Remove calls to qsort, use virDoaminDiskInsert
instead. Fix reordering bugs when hotunplugging disks and
networks. Fix memory leak in disk/net unplug
* proxy/Makefile.am: Build storage_encryption_conf.c since its a
dependancy of domain_conf.c
* src/storage_encryption_conf.c: Disable XML parsing APis when
build under proxy
* src/test.c: Add a dummy no-op secrets driver for test suite
The if ((nlptr...)) implicitly assumes commptr != NULL (and that "buf"
starts with "cmd"). Make the assumption explicit, it will be broken in
a future patch.
* src/qemu_driver.c: Don't assume buffered monitor output echoes the
command.
The XML allows <encryption format='unencrypted'/>, this implementation
canonicalizes the internal representation so that "disk->encryption" is
non-NULL iff encryption information is available.
A domain with partial encryption information can be defined,
completeness of the information is not verified. The domain won't
start until the remaining information is added, of course.
* docs/formatdomain.html, docs/formatdomain.html.in: Document
new encryption options for disks
* docs/schemas/domain.rng: Pull in storage encryption schema
rules
* src/domain_conf.h, src/domain_conf.c: Wire up storage encryption
XML parsing/formatting APIs
Supports only virStorageVolCreateXML, not virStorageVolCreateXMLFrom.
Curiously, qemu-img does not need the passphrase for anything to create
an encrypted volume. This implementation thus does not need to touch
any secrets to work with cooperating clients. More generic passphrase
handling is added in the next patch.
* src/storage_backend.c: Request encryption when creating qcow/qcow2
files
* src/storage_backend_disk.c, src/storage_backend_fs.c,
src/storage_backend_logical.c: Refuse to create volumes with
encryption params set.
(The implementation is not very generic, but that can be very
easily rectified if/when new encryption formats appear.)
* src/storage_backend_fs.c: Probe for qcow/qcow2 encryption
algorithm field
The XML allows <encryption format='unencrypted'/>, this implementation
canonicalizes the internal representation so that "vol->encryption" is
non-NULL iff the volume is encrypted.
Note that partial encryption information (e.g. specifying an encryption
format, but not the key/passphrase) is valid, libvirt will automatically
choose value for the missing information during volume creation. The
user can read the volume XML, and use the unmodified <encryption> tag in
future operations (without having to be able to understand) its contents.
* docs/formatstorage.html, docs/formatstorage.html.in: Document
storage volume encryption options
* src/storage_conf.c, src/storage_conf.h: Hook up storage
encryption XML handling
* tests/storagevolschemadata/vol-qcow2.xml: Test case for encryption
schema changes
Define an <encryption> tag specifying volume encryption format and
format-depenedent parameters (e.g. passphrase, cipher name, key
length, key).
Currently the only defined parameter is a reference to a "secret"
(passphrase/key) managed using the virSecret* API.
Only the qcow/qcow2 encryption format, and a "default" format used to
let libvirt choose the format during volume creation, is currently
supported.
This patch does not add any users; the <encryption> tag is added in
the following patches to both volumes (to support encrypted volume
creation) and domains.
* docs/*.html: Re-generate
* docs/formatstorageencryption.html.in, docs/sitemap.html.in:
Add page describing storage encryption data format
* docs/schemas/Makefile.am, docs/schemas/storageencryption.rng:
Add RNG schema for storage encryption format
* po/POTFILES.in: Add src/storage_encryption_conf.c
* src/libvirt_private.syms: Export virStorageEncryption* functions
* src/storage_encryption_conf.h, src/storage_encryption_conf.c: Internal
helper APIs for dealing with storage encryption format
* libvirt.spec.in, mingw32-libvirt.spec.in: Add storageencryption.rng
RNG schema
* include/libvirt/virterror.h, src/virterror.c: Add VIR_WAR_NO_SECRET
* src/libvirt_private.syms, src/datatypes.h, src/datatypes.c: Type
virSecret struct definition and helper APIs
* src/driver.h: Sub-driver API definitions for secrets
* src/libvirt.c: Define new sub-driver for secrets
This patch adds a "secret" as a separately managed object, using a
special-purpose API to transfer the secret values between nodes and
libvirt users.
* docs/schemas/secret.rng, docs/schemas/Makefilem.am: Add new
schema for virSecret objects
* docs/*html: Re-generated
* docs/formatsecret.html.in, docs/sitemap.html.in: Add page
describing the virSecret XML schema
* include/libvirt/libvirt.h.in: Define the new virSecret public
API
* src/libvirt_public.syms: Export symbols for new public APIs
* mingw32-libvirt.spec.in, libvirt.spec.in: Add secret.rng to
files list
Per prior discussion -- this was, indeed, trivial.
I'm a little disappointed to be breaking the ordering characteristics of
the enum (as it had been ordered by increasing time requirements and
decreasing output size), but breaking any save files with the old
constants in the headers would of course be worse.
>From 2a9cdcfc88de091a8d34aa3fc3b1208d7681790e Mon Sep 17 00:00:00 2001
From: Charles Duffy <Charles_Duffy@dell.com>
Date: Fri, 28 Aug 2009 11:49:54 -0500
Subject: [PATCH] support lzop save compression for qemu
One of the larger disincentives towards use of compression for migrated-out save
files is performance impact. This patch adds support for lzop; CPU time for
compression is about 5x faster than gzip (the next most performant algorithm)
and decompression is about 3x faster.
Signed-off-by: Charles Duffy <Charles_Duffy@dell.com>
Signed-off-by: Chris Lalancette <clalance@redhat.com>
All of the other drivers that support the getMaxVcpus callback
also accept a NULL value for type. Make openvz also accept a
NULL value.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
qemudExtractMonitorPath() was doing a VIR_ALLOC_N followed by a
strncpy. However, this isn't necessary; we can do the same thing
using strndup, which is much safer.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
The documentation for virNodeGetCellsFreeMemory claims the values
returned are in kilobytes, but that's actually wrong; the value
returned is actually in bytes. Fix up the documentation to be
correct.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
S-expression containing empty lists, e.g. (cpus (() () () ())),
was not being handled properly in sexpr2string() serialization.
Emit an empty list when encountering NIL sexpr kind.
* src/remote_internal.c: Split remoteAuthPolkit into separate
impls for v0 and v1 to avoid compile warnings due to unused
variables/params
* qemud/remote.c: Remove accidental tabs
* configure.in: Check for pkcheck which indicates new policykit
* qemud/Makefile.am: Install different versions of policy
* qemud/libvirtd.policy: Rename to libvirtd.policy-0
* qemud/libvirtd.policy-1: new style policy
* qemud/qemud.c, qemud/qemud.h, qemud/remote.c: Support new
policykit API via external pkcheck helper
* src/remote_internal.c: Don't prompt for polkit auth with new
policykit API
* libvirt.spec.in: deal with new policy install locations & deps
Matthias correctly points out that escape_specialcharaters() takes a
length, and since we are now malloc()'ing string in phypOpen instead of
making it a static array, we can't use sizeof(string) anymore. Calculate
the proper strlen and then use that both to allocate the string and also
pass it to escape_specialcharacters().
Signed-off-by: Chris Lalancette <clalance@redhat.com>
I came across this line in the phypOpen function:
char string[strlen(conn->uri->path)];
Here the path part of the given URI is used without checking it for
NULL, this can cause a segfault as strlen expects a string != NULL.
Beside that uuid_db and connection_data leak in case of an error.
In this line
conn->uri->path = string;
the original path of the URI leaks. The patch adds a VIR_FREE call
before setting the new path.
The attached patch is compile-tested but I don't have a Power
Hypervisor installation at hand to test it for real.
Matthias
Signed-off-by: Chris Lalancette <clalance@redhat.com>
Fix up a small memory leak pointed out by DanB; I was forgetting
to release memory allocated to driver->saveImageFormat.
Also add the "save_image_format" and "security" entries to
the augeas lens.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
https://bugzilla.redhat.com/517371
Matt Booth points out that if you use a non-existent bridge name when
start a guest you get a weird error message:
Failed to add tap interface 'vnet%d' to bridge 'virbr0'
and dev='vnet%d' appears in the dumpxml output.
Fix that by not including 'vnet%d' in the error message and freeing the
'vnet%d' string if adding the tap device to the bridge fails.
* src/qemu_conf.c, src/uml_conf.c: fix qemudNetworkIfaceConnect()
and umlConnectTapDevice() to not expose 'vnet%d' to the user
As we start/shutdown guests, or hotplug/hot-unplug devices, we can add
or delete devices as appropriate from a list of active devices.
Then, in pciReset(), we can use this to determine whether its safe to
reset a device as a side effect of resetting another device.
* src/qemu_conf.h: add activePciHostdevs to qemud_driver
* src/qemu_driver.c: maintain the activePciHostdevs list, and pass it
to pciResetDevice()
* src/pci.[ch]: pass the activeDevs list to pciResetDevice() and use
it to determine whether a Secondary Bus Reset is safe
The qemuPrepareHostDevices() and qemuDomainReAttachHostDevices()
functions are clutter with a bunch of calls to pciGetDevice() and
pciFreeDevice() obscuring the basic logic.
Add a pciDeviceList type and add a qemuGetPciHostDeviceList() function
to build a list from a domain definition. Use this in prepare/re-attach
fto simplify things and eliminate the multiple pciGetDevice calls.
This is especially useful because in the next patch we need to iterate
the hostdevs list a third time and we also need a list type for keeping
track of active devices.
* src/pci.[ch]: add pciDeviceList type and also a per-device 'managed'
property
* src/libvirt_private.syms: export the new functions
* src/qemu_driver.c: add qemuGetPciHostDeviceList() and re-write
qemuPrepareHostDevices() and qemuDomainReAttachHostDevices() to use it
Newer versions of QEMU accept 'pci_add auto', but older versions require
'pci_add pci_addr=auto'
* src/qemu_driver.c: use pci_addr= in qemudDomainAttachHostPciDevice()
for older versions of QEMU
When we hot-unplug a PCI host device from a guest, we should reset it.
Both managed and unmanaged devices should be reset, but only managed
devices should be re-attached.
* src/qemu_driver.c: reset devices in qemudDomainDetachHostPciDevice()
Right now we're only resetting managed devices before hotplug, but we
should reset them irrespective of whether they are managed.
* src/qemu_driver.c: reset all PCI hostdevs before hotplug
It turns out that the previous attempt at this doesn't work well
in the case of hotplug. We need qemuCheckPciHostDevice() to
disallow the reset affecting devices already attach to the guest,
but we still need to avoid double locking the virDomainObjPtr.
This is all getting messy, I've a better idea.
This reverts commit 6318808270 and
c106c8a18c.
* src/qemu_driver.c, src/pci.[ch], src/xen_unified.c,
src/libvirt_private.syms: revert a bunch of stuff.
The current code makes a poor effort at updating the device arrays after
hot-unplug. Fix that and combine the two code paths into one.
* src/qemu_driver.c: fix list updating in qemudDomainDetachNetDevice(),
qemudDomainDetachPciDiskDevice() and qemudDomainDetachHostPciDevice()
Maybe it's just me, but I try to select an item from the tree using
double-click and get annoyed when "+-" gets included in the selection.
* src/virsh.c: add a space between "+-" and the node device name
in 'virsh nodedev-list --tree'
Currently the reference counting for connections is busted. I
first noticed it while trying to use virConnectRef; it would
eventually cause a crash in the remote_internal driver, although
that was really just a victim. Really, we should only call the
close callbacks on the methods when the references drop to 0. To
accomplish this, move all of the close callbacks into
virUnrefConnect (since there are lots of internal users of that
function), and arrange for virConnectClose to call that.
V2: Make sure to drop the connection lock before we call the close
callbacks, otherwise we could deadlock the daemon
V3: Fix up a crash when we got an error from one of the drivers
Signed-off-by: Chris Lalancette <clalance@redhat.com>
* src/domain_conf.c: Make virDomainObjListFree a no-op if list
is NULL
* src/domain_event.c: make virDomainEventCallbackListFree a no-op
if event list is NULL
* src/lxc_driver.c: Log a message if LXC driver does not startup
due to lacking kernel support
Implement a compressed save image format for qemu. While ideally
we would have the choice between compressed/non-compressed
available to the libvirt API, unfortunately there is no "flags"
parameter to the virDomainSave() API. Therefore, implement this
as a qemu.conf option. gzip, bzip2, and lzma are implemented, and
it should be very easy to implement additional compression
methods.
One open question is if/how we should detect the compression
binaries. One way to do it is to do compile-time setting of the
paths (via configure.in), but that doesn't seem like a great thing
to do. My preferred solution is not to detect at all;
when we go to run the commands that need them, if they
aren't available, or aren't available in one of the standard paths,
then we'll fail. That's also the solution implemented in this patch.
In the future, we'll have a more robust (managed) save/restore API,
at which time we can expose this functionality properly in the API.
V2: get rid of redundant dd command and just use >> to append data.
V3: Add back the missing pieces for the enum and bumping the save version.
V4: Make the compressed field in the save_header an int.
Implement LZMA compression.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
If a PCI device reset causes other devices to be reset, allow it so long
as those other devices are note assigned to another active domain.
Note, we need to take the driver lock qemudNodeDeviceReset() because the
check function will iterate over the domain list.
* src/qemu_conf.c: add qemuCheckPciHostDevice() to iterate over active
domains checking whether the affected device is assigned
* src/pci.[ch]: add pciDeviceEquals() helper
When using a Secondary Bus Reset, all devices on the bus are reset.
Extend the pciResetDevice() API so that a 'check' callback can be
supplied which will verify that it is safe to reset the other devices
on the bus.
The virDomainObjPtr parameter is needed so that when the check function
iterates over the domain list, it can avoid double locking.
* src/pci.[ch]: add a 'check' callback to pciResetDevice(), re-work
pciIterDevices() to pass the check function to the iter functions,
use the check function in the bus iterator, return the first unsafe
device from pciBusCheckOtherDevices() and include its details in
the bus reset error message.
* src/qemu_driver.c, src/xen_uninified.c: just pass NULL as the
check function for now
Currently, if we are unable to reset a PCI device we return a fairly
generic 'No PCI reset capability available' error message.
Fix that by returning an error from the individual reset messages and
using that error to construct the higher level error mesage.
* src/pci.c: set errors in pciTryPowerManagementReset() and
pciTrySecondaryBusReset() on failure; use those error messages
in pciResetDevice(), or explain that no reset support is available
When the guest shuts down, we should attempt to restore all PCI host
devices to a sane state.
In the case of managed hostdevs, we should reset and re-attach the
devices. In the case of unmanaged hostdevs, we should just reset them.
Note, KVM will already reset assigned devices when the guest shuts
down using whatever means it can, so we are only doing it to cover the
cases the kernel can't handle.
* src/qemu_driver.c: add qemuDomainReAttachHostDevices() and call
it from qemudShutdownVMDaemon()
It turns out that a PCI Power Management reset only affects individual
functions, and not the whole device.
The PCI Power Management spec talks about resetting the 'device' rather
than the 'function', but Intel's Dexuan Cui informs me that it is
actually a per-function reset.
Also, Yu Zhao has added pci_pm_reset() to the kernel, and it doesn't
reject multi-function devices, so it must be true! :-)
(A side issue is that we could defer the PM reset to the kernel if we
could detect that the kernel has PM reset support, but barring version
number checks we don't have a way to detect that support)
* src/pci.c: remove the pciDeviceContainsOtherFunctions() check from
pciTryPowerManagementReset() and prefer PM reset over bus reset
where both are available
Cc: Cui, Dexuan <dexuan.cui@intel.com>
Cc: Yu Zhao <yu.zhao@intel.com>
PCI device assignment is only supported in KVM's fork of qemu, so we
should really detect its availability and give a nice error if its
not supported.
* src/qemu_conf.[ch]: introduce QEMUD_CMD_FLAG_PCIDEVICE indicating
that the -pcidevice command line option is available
* tests/*: update the tests
Attaching a host PCI device to a qemu guest is done with a
straightforward 'pci_add auto host host=XX:XX.X' command.
Like with NIC and disk hotplug, we need to retain the guest PCI address
assigned by qemu so that we can use it for hot-unplug.
Identifying a device for detach is done using the host PCI address.
Managed mode is handled by detaching/resetting the device before
attaching it to the guest and re-attaching it after detaching it from
the guest.
* src/qemu_driver.c: add qemudDomainAttachHostPciDevice() and
qemudDomainDetachHostPciDevice()
* src/domain_conf.h: add somewhere to store the guest PCI address
* src/domain_conf.c: handle formatting and parsing the guest PCI
address
Re-factor the hostdev hotplug code so that we can easily add PCI
hostdev hotplug to qemudDomainAttachHostDevice().
* src/qemu_driver.c: rename qemudDomainAttachHostDevice() to
qemudDomainAttachHostUsbDevice(); make qemudDomainAttachHostDevice()
handle all hostdev types
* src/libvirt_private.syms: export a couple of hostdev related
ToString() functions
Some kernel versions expose broken NUMA topology for some machines.
This causes the LXC/UML drivers to fail to start. QEMU driver was
already fixed for this problem
* src/lxc_conf.c: Log and ignore failure to populate NUMA info
* src/uml_conf.c: Log and ignore failure to populate NUMA info
* src/capabilities.c: Reset nnumaCell to 0 after freeing
A couple of minor fixes to phyp escape_specialcharacters. Make it
a static function (since it's only used in phyp/phyp_driver.c), and
make it take a dstlen parameter. This paves the way for removing
strncpy in the future.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
Minor fix to openvzGetVPSUUID to make it take a length parameter.
This ensures that it doesn't make assumptions about the length
of the UUID buffer, and paves the way for removal of strncpy in
the future.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
As of qemu 0.10.6, qemu now honors the -S flag on incoming migration.
That means that when the migration completes, we have to issue a
'cont' command to get the VM running again. We do it unconditionally
since it won't hurt on older qemu.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
Re-factor virDomainMigrate to split out the version 1 and version 2
protocols into their own functions. In reality, the two versions share
very little in common, so forcing them together in the same function was
just confusing. This will also make adding tunnelled migration easier.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
When doing a restore, we were forgetting to update the state file
for the VM. That means that if you do a save/restore, then shut
down libvirtd, then start it back up, you'll see the state of the
guest as "paused", even though it is really running. We were
just forgetting a "virDomainSaveStatus" call in the restor path.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
If the ipv6 kernel module is not loaded, then we get this when starting
a virtual network:
libvir: Network Config error :
cannot enable /proc/sys/net/ipv6/conf/virbr0/disable_ipv6:
No such file or directory
If disable_ipv6 is not present, we should just merrily continue on our
way.
* src/network_driver.c: make networkDisableIPV6() not fail if the kernel
has no ipv6 support
If we're running qemu unprivileged, we need to chown any supplied kernel
or initrd before spawning it.
* src/qemu_driver.c: rename qemuDomainSetDiskOwnership() to
qemuDomainSetFileOwnership(), pass it a path string instead of a disk
definition and use it for chowning the kernel/initrd in
qemuDomainSetAllDeviceOwnership()
While trying to remove uses of unsafe strncpy in the tree, I came
across a couple of usages in the ESX driver. To my eyes, the snprintf
replacements do the same thing in less code, and are also safer.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
Tested-by: Mattias Bolte <matthias.bolte@googlemail.com>
* src/logging.c src/logging.h src/libvirt_private.syms:
define new functions virLogSetFromEnv and virLogParseDefaultPriority
* qemud/qemud.c src/libvirt.c tests/eventtest.c: cleanup to use the
unified functions
* qemud/qemud.c src/logging.[ch]: Similar as for general libvirt, don't
convert high priority levels to debug level. Ignore LIBVIRT_LOG_FILTERS
and LIBVIRT_LOG_OUTPUTS when they're set to the empty string, otherwise
they can override a valid setting from the config file. Send all
settings through the parser functions for validation, so that the
existence of a bad setting doesn't nullify a good setting that should
have applied -- particularly the default output. Keep the order of
precedence consistent for all variables between the environment and
the config file. Warn when an invalid log level, filter, or output
is ignored.
* src/libvirt_private.syms: export internally a few convenience functions
* src/libvirt.c src/logging.c: Don't convert high priority levels to the
debug level. Don't parse LIBVIRT_LOG_FILTERS and LIBVIRT_LOG_OUTPUTS
when they're set to the empty string. Warn when the user specifies an
invalid value (empty string remains a noop).
* po/POTFILES.in: src/logging.c now include translatable strings
* src/xm_internal.c: in case of multiple connections to the xen driver
and some clients were not using domain events, the whole /etc/xen
monitoring would break leading to disapearing domains.
* src/esx/esx_driver.c src/esx/esx_vi.[ch] src/esx/esx_vmx.[ch]:
adds version checking for GSX 2.0, allows to pass a specific port
for the connection and also add a new specific gsx scheme for
easier connections to GSX hosts
Fix up qemudDomainMigratePrepare2 to use virGetHostname instead of
gethostname. Besides the fact that virGetHostname is far more clever,
there was a latent bug in the handling that could cause a buffer overflow
on a very long hostname.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
* autobuild.sh, mingw32-libvirt.spec.in: Enable esx on mingw32
* src/esx/esx_driver.c: Define AI_ADDRCONFIG if not set
* src/esx/esx_util.c, src/esx/esx_vi_types.c: Always use
%lld & friends, since gnulib guarentees we have these
and not the target's own variants
If the bridge device is configured to have IPv6 address and
accept router advertisments, then a malicious guest can send
out bogus advertisments and hijack/DOS host IPv6 connectivity
* src/network_driver.c: Set accept_ra=0, disable_ipv6=1, autoconf=0
for IPv6 sysctl on virual network bridge devices
PCIe DevCap register is actually 32 bits, not 16 bits. Since FLR is
bit 28, we clearly are failing to detect FLR support.
Known to fix device reset with some SR-IOV devices.
* src/pci.c: fix pciDetectFunctionLevelReset()
* src/util.c: Don't drop capabilities until after the PID file has
been written. Kill off child if writing the PID file fails
* src/qemu_driver.c: Remove bogus trailing '/' in state dir
* esx/esx_driver.c: add some documentation about the CPU scheduler
parameters and remove some old, unnecessary compensation code, since
virsh uses the proposed parameter types now.
* src/qemu_driver.c: fix qemudOpenMonitorUnix() to retry on ENOENT
instead of EACCES which is the error one receive when the socket
error hasn't shown up yet
In order to hotplug a network/bridge backed NIC, we need to first create
the tap file descriptor, add the tap interface to the bridge and then
pass the file descriptor to the qemu process using the 'getfd' monitor
command.
Once the tapfd has been accepted, we create the network backend using
host_net_add, supplying the name assigned to the tapfd. If this fails,
we need to close the tapfd in qemu using the 'closefd' monitor command.
If the version of qemu does not support the getfd/closefd monitor
commands we detect "unknown command" in the getfd reply and fail the
attach operation.
* src/qemu_driver.c: add support for tapfd based hotplug in
qemudDomainAttachNetDevice()
Add qemudMonitorCommandWithFd() which allows a file descriptor to be
sent to qemu over a unix monitor socket using SCM_RIGHTS. See the
unix(7) and cmsg(3) man pages.
* src/qemu_conf.c: add a scm_fd param to qemudMonitorCommandExtra(),
add qemudMonitorCommandWithFd(), implement SCM_RIGHTS support in
qemudMonitorSendUnix()
Switch from using write() to using sendmsg() on QEMU's monitor socket
so that we can add support for SCM_RIGHTS.
* src/qemu_driver.c: add sendmsg() based qemudMonitorSendUnix() and use
it when the monitor fd is a unix socket
Add a little helper function to write the monitor command followed by
carriage return in a single write.
This doesn't make any real difference, but allows us to more easily
switch to using sendmsg() when using the monitor over a unix socket.
* src/qemu_conf.c: split qemudMonitorSend() out
In subsequent patches we're going to have a file descriptor to close
too, so centralize the error handling cleanups to make things easier.
* src/qemu_conf.c: in qemudDomainAttachNetDevice() consolidate the
error handling cleanups together
With hotplug, we're going to want to pass a tapfd name rather than an
actual file descriptor, so prepare the way by passing a string tapfd to
qemuBuildHostNetStr().
* src/qemu_conf.h: qemuBuildHostNetStr() takes a string tapfd now
* src/qemu_conf.c: pass qemuBuildHostNetStr() a string rather than an
actual file descriptor
* src/qemu_driver.c: update qemudDomainAttachNetDevice() for change
* src/qemu_conf.h: export qemudNetworkIfaceConnect()
* src/qemu_conf.c: move vnet_hdr logic into qemudNetworkIfaceConnect()
since we need it for hotplug too
By probing for qemu machine types, we increased the time of a
GetCapabilities call from 100us to a whopping 60ms.
This patch takes the approach of only probing for machine types
when the mtime of the emulator binary changed since the last time
the capabilities were generated.
* src/capabilities.h: cache the emulator binary mtime
* src/qemu_conf.c: add qemudGetOldMachines() to copy the machine
types from the old caps struct if the mtime for the binary hasn't
changed
* src/qemu_conf.h, src/qemu_driver.c: pass the old caps pointer to
qemudCapsInit()
e.g. <machine canonical='pc'>pc-0.11</machine>
* src/capabilities.c: output the canonical machine names in the
capabilities output, if available
* docs/schemas/capabilities.rng: add the new attribute
Not all possible emulators are actually in the capabilities, so if we
don't find the supplied emulator we should probe it directly for machine
types.
* src/qemu_driver.c: add qemudCanonicalizeMachineDirect() to directly
probe an emulator for the canonical machine type
In qemu-0.11 there is a 'pc-0.10' machine type which allows you to run
guests with a machine which is compatible with the pc machine in
qemu-0.10 - e.g. using the original PCI class for virtio-blk and
virtio-console and disabling MSI support in virtio-net. The idea here
is that we don't want to suprise guests by changing the hardware when
qemu is updated.
I've just posted some patches for qemu-0.11 which allows libvirt to
canonicalize the 'pc' machine alias to the latest machine version.
This patches makes us use that so that when a guest is configured to
use the 'pc' machine type, we resolve that to 'pc-0.11' machine and
save that in the guest XML.
See also:
https://fedoraproject.org/wiki/Features/KVM_Stable_Guest_ABI
* src/qemu_conf.c: add qemudCanonicalizeMachine() to canonicalize
the machine type according to the machine aliases in capabilities
* src/qemu_driver.c: parse aliases in qemudParseMachineTypesStr()
A subsequent commit will add a "canonical" field to this structure,
this patch basically just prepares the way for that.
The new type is added, along with virCapabilitiesAlloc/FreeMachines()
helpers and a whole bunch of code to make the transition.
One quirk is that virCapabilitiesAddGuestDomain() and
virCapabilitiesAddGuest() take ownership of the machine list rather
than duping it. This makes sense to avoid needless copying.
* src/capabilities.h: add the virCapsGuestMachine struct and use it
in virCapsGuestDomainInfo, add prototypes for new functions and
update the AddGuest() prototypes
* src/capabilities.c: add code for allocating and freeing the new
type, change the machines parameter to AddGuest() etc.
* src/libvirt_private.syms: export the new helpers
* src/qemu_conf.c: update all the machine type code to use the new
struct
* src/xen_internal.c: ditto
* tests/testutilsqemu.c: ditto
Currently we hardcode the QEMU machine types. We should really just
parse the output of 'qemu -M ?' so the lists don't get out of sync.
xenner doesn't support '-M ?', so we still need to hardcode that.
The horrible (const char *const *) is removed in a subsequent patch.
* src/qemu_conf.c: kill the arch_info*machines tables, retain the
hardcoded xenner machine type, add qemudProbeMachineTypes() to
run and parse 'qemu -M ?' and use it in qemudCapsInitGuest()
There's no need for the hasbase/hasaltbase confusion, just store the
first binary path found in a variable.
* src/qemu_conf.c: kill hasbase/hasaltbase logic in qemudCapsInitGuest()
* src/esx/esx_driver.c src/esx/esx_vi.c src/esx/esx_vi.h
src/esx/esx_vmx.c src/esx/esx_vmx.h: extend the VI API version checks
to accept version 4.0 and takes care of the virtualHW.version change
from 4 to 7.
* src/esx/esx_driver.c src/esx/esx_util.c src/esx/esx_util.h
src/esx/esx_vi.c src/esx/esx_vi.h: adds a no_verify query parameter to
stop libcurl from verifying theserver certificate for the https
transport.
Do the check in libvirt.c, to save drivers from the burden. This changes
behavior slightly in the qemu driver: we no longer explictly error if
passed an empty string. An error will still be thrown when the device
lookup fails.
* src/vbox/vbox_driver.c: remove some old 2.5 switches and plug the
3.0 driver
* src/vbox/vbox_V3_0.c src/vbox/vbox_CAPI_v3_0.h: the driver for
VirtualBox 3.0
* src/vbox/vbox_tmpl.c: handle the new driver and add event support
* src/Makefile.am: plug in the new module
Features supported:
- Connects to HMC/VIOS or IVM systems.
- Life cycle commands (resume and shutdown).
- dumpxml
- 'list' and 'list --all'
What is being implemented:
- better and centralized control for UUID
- definexml
- CPU management commands
* src/domain_conf.c src/domain_conf.h: first version of the driver
* configure.in src/Makefile.am include/libvirt/virterror.h
src/domain_conf.[ch] src/libvirt.c src/virterror.c: glue the driver
in the general framework
* src/esx/esx_*.[ch]: the driver, uses a remote minimal SOAP client
to talk to the VI services on ESX nodes.
* configure.in include/libvirt/virterror.h src/Makefile.am src/driver.h
src/libvirt.c src/virterror.c: glue in the new driver
* qemud/libvirtd_qemu.aug, qemud/test_libvirtd_qemu.aug,
src/qemu.conf: Add 'cgroups_controllers' and 'cgroups_device_acl'
parameters
* src/qemu_conf.h, src/qemu_conf.c: Load & parse configuration params
for cgroups
* src/qemu_driver.c: Only use cgroups controllers that are activated,
and use configured device whitelist instead of default, if set.
* src/qemu_driver.c: Set a restrictive block device whitelist for
all QEMU guests. Update whitelist when hotplugging disks.
* src/cgroup.h, src/cgroup.c: Add some more convenience methods
for dealing with block device whitelists.
* src/qemu_driver.c: Add driver methods qemuGetSchedulerType,
qemuGetSchedulerParameters, qemuSetSchedulerParameters
* src/lxc_driver.c: Fix to use unsigned long long consistently
for schedular parameters
* src/cgroup.h, src/cgroup.c: Fix cpu_shares to take unsigned
long long
* src/util.c, src/util.h, src/libvirt_private.syms: Add a
virStrToDouble helper
* src/virsh.c: Fix handling of --set arg to schedinfo command
to honour the designated data type of each schedular tunable
as declared by the driver
Allow the driver level cgroup to be managed explicitly by the
hypervisor drivers, in order to detect whether to enable or
disable cgroup support for domains. Provides better error
reporting of failures. Also allow for creation of cgroups for
unprivileged drivers if controller is accessible by the user.
* src/cgroup.c, src/cgroup.h: Add an API to obtain a driver cgroup
* src/lxc_conf.h, src/lxc_controller.c, src/lxc_driver.c:
Obtain a driver cgroup at startup and use that instead of
re-creating everytime.
* src/util.c, src/util.h, src/libvirt_private.syms: Add a
virGetUserName() helper
* src/cgroup.c: Detect the mount location of every controller at
time a virCgroupPtr is created. Detect current process' placement
within group to avoid assuming it is in the root. Pass controller
ID into SetValueStr/GetValueStr to enable much duplicated code to
be eliminated
* src/datatypes.c src/domain_conf.c src/interface_conf.c
src/lxc_driver.c src/qemu_driver.c src/storage_backend.c src/virsh.c:
add bare %s format string to printf-derivatives called with no format
string
GCC >= 4.4 assumes the 'printf' attribute refers to the native
runtime libraries format specifiers. Thanks to gnulib, libvirt
has GNU format specifiers everywhere. This means we need to
use 'gnu_printf' with GCC >= 4.4 to get correct compiler
checking of printf format specifiers.
* HACKING: Document new rules for ATTRIBUTE_FMT_PRINTF
* autobuild.sh, mingw32-libvirt.spec.in: Disable OpenNebula
driver on mingw32 builds
* qemud/dispatch.h, qemud/qemu.h, src/buf.h src/internal.h,
src/logging.h, src/security.h, src/sexpr.h, src/util.h,
src/virterror_internal.h, src/xend_internal.c: Change
over to ATTRIBUTE_FMT_PRINTF.
* src/virsh.c: Disable 'cd' and 'pwd' commands on Win32
since they don't compile
* src/threads-win32.c: Add missing return value check
If the qemu binary supports "-no-kvm" and/or "-no-kqemu", they should
always be added for plain "qemu" domains. Previously, we omitted them
whenever the host and guest architectures implied that they would be
disabled automatically, but that logic was flawed in some cases
(such as i686 and x86_64).
* src/qemu_conf.c: fix the conditions for adding "-no-kvm" and/or "-no-kqemu"
* include/libvirt/libvirt.h include/libvirt/libvirt.h.in: adds the new
flag VIR_MEMORY_PHYSICAL for virDomainMemoryPeek
* src/libvirt.c: update the front-end checking
* src/qemu_driver.c: extend the QEmu driver
* src/datatypes.c: fix a lock problem on error handling, as the
error report takes the lock, it must be released before, fixes
the problem but just for Interface objects
qemu network devices are hot-unplugged in two stages - first the PCI NIC
is removed using 'pci_del <pci_addr>' and then the backend is removed
using 'host_net_remove <vlan> <name>'.
In order to perform these operations we need to have retained the
PCI address, backend name and vlan number.
* src/qemu_driver.c: add qemudDomainDetachNetDevice()
When we pci_add a NIC, we need to retain the PCI address assigned by
qemu for using during detach.
* src/qemu_driver.c: use qemudParsePciAddReply() to pull the PCI
address from the pci_add reply
* src/domain_conf.c: handle storing and parsing the PCI address in the
domain state XML file
The current code for parsing pci_add replies ignores the the domain and
bus numbers. Re-write the code to rectify that.
Also, since pci_add is used for NIC hotplug as well ask disk hotplug,
re-factor the code into a separate function.
* src/qemu_driver.c: add qemudParsePciAddReply() function which can
handle parsing domain and bus numbers
If we fail to pci_add a NIC, we should remove the network backend and
leave things the way we found them. To do that, we pre-allocate a
host_net_remove monitor command and issue that if the pci_add fails.
If the remove fails, we just log a warning.
We can only do this if we have a name for the network backend and
we know the vlan number its associated with.
* src/qemu_driver.c: host_net_remove the network backend if the
pci_add fails
Implement basic NIC hotplug support using the 'host_net_add' and
'pci_add' qemu monitor commands.
For now, we don't support 'bridge' or 'network' types.
Also, if pci_add fails, we currently fail to remove the backend
which we added.
Finally, NIC hot-unplug support is missing.
* src/qemu_driver.c: add qemudDomainAttachNetDevice()
* src/qemu_conf.[ch]: export qemuBuildNicStr(), qemuBuildHostNetStr()
and qemuAssignNames()
* src/libvirt_private.syms: export virDomainNetTypeToString()
qemudDomainChangeEjectableMedia() currently extracts the qemu command
line flags, but other device attaching code might need it, so move
the qemudExtractVersionInfo() call up a frame.
* src/qemu_driver.c: move the qemudExtractVersionInfo() call from
qemudDomainChangeEjectableMedia() to qemudDomainAttachDevice()
Currently, an interface's vlan number corresponds to its index in
the table of network interfaces. That is no longer true when we
allow devices to be removed.
To fix this, we store the vlan number in the domain's state XML
so that it survives libvirtd restarts.
* src/domain_conf.h: add vlan number to virDomainNetDef
* src/domain_conf.c: store it in XML as <state vlan='N'/>, defaulting
to -1 if this is state saved by a previous version of libvirt
* src/qemu_conf.c: assign vlan numbers before starting qemu
The qemu driver needs to assign and keep track of identifiers for
network devices so that it can remove them. We need to keep this state
across libvirtd restarts, but it's not configuration that needs to
be kept across guest restarts.
* src/domain_conf.c: parse and format <state nic="foo" hostnet="bar"/>
We need these so that we can remove the devices via the monitor.
* src/domain_conf.h: add nic_name and hostnet_name to virDomainNetDef
* src/domain_conf.c: free nic_name and hostnet_name
* src/qemu_conf.c: add qemuAssignNetNames(), use it if qemu has
support for the param and pass the names on the command line
* tests/qemuxml2argv*: add a test for this
Add QEMUD_CMD_FLAG_NET_NAME to indicate that '-net ...,name=foo' is
supported and QEMUD_CMD_FLAG_HOST_NET_ADD to indicate that the
'host_net_add' monitor command is available.
Set both these flags if the qemu version is greater than 0.10.0.
Checking via the '-help' output would not work for the monitor command
and even for the command line arg, it would be quite fragile.
* src/qemu_conf.h: add new flags as aliases of QEMUD_CMD_FLAG_0_10
* src/qemu_conf.c: set QEMUD_CMD_FLAG_0_10 for versions >= 0.10.0
* tests/qemuhelptest.c: set QEMUD_CMD_FLAG_0_10 for the appropriate
qemu versions
Re-factor this code so that it can be used for NIC hotplug
too. The awkward prefix and type_sep arguments are needed to
allow us to do "host_net_add tap vlan=..."
* src/qemu_conf.c: factor the net backend string formatting
code into its own function
Re-factor this code so that it can be used for NIC hotplug
too. The awkward arguments are needed to allow use to do
"pci_add auto nic macaddr=..."
* src/qemu_conf.c: factor the nic string formatting code into
its own function
When we hot-plug a disk device into a qemu guest, we need to retain its
PCI address so that it can be removed again later. Currently, we do
retain the slot number, but not across libvirtd restarts.
Add <state devaddr="xxxx:xx:xx"/> to the disk device XML config when the
VIR_DOMAIN_XML_INTERNAL_STATUS flag is used. We still don't parse the
domain and bus number, but the format allows us to do that in future.
* src/domain_conf.h: replace slotnum with pci_addr struct, add helper
for testing whether the address is valid
* src/domain_conf.c: handle formatting and parsing the address
* src/qemu_driver.c: store the parsed slot number as a full PCI address,
and use this address with the pci_del monitor command
* src/vbox/vbox_tmpl.c: we're debug printing slotnum here even though
it can never be set, just delete it
We need to store things like device names and PCI slot numbers in the
qemu domain state file so that we don't lose that information on
libvirtd restart. Add a flag to indicate that this information should
be parsed or formatted.
Make bit 16 and above of the flags bitmask for internal use only and
consume the first bit for this new status flag.
* include/libvirt/libvirt.h: add VIR_DOMAIN_XML_FLAGS_MASK
* src/libvirt.c: reject private flags in virDomainGetXMLDesc()
* src/domain_conf.h: add VIR_DOMAIN_XML_INTERNAL_STATUS
* src/domain_conf.c: pass the flag from virDomainObjParseXML() and
virDomainSaveStatus
* src/libvirt.c: activate the interface drivers
* po/POTFILES.in: add the netcf driver as a source of localization strings
* src/interface_driver.c: NETCF_ENOMEM -> VIR_ERR_NO_MEMORY mapping was
breaking syntax checking
* src/interface_driver.c src/interface_driver.h: the new driver
* src/Makefile.am qemud/Makefile.am qemud/qemud.c: hook the new driver
in the build system and get ti activated by the daemon
* src/libvirt_private.syms: export needed symbols internally
MAC address of a particular interface may change over time, and the
reduced virInterface object (which contains just name and mac) needs
to reflect these changes. Since we can't modify the mac address of an
existing virInterface (some other thread may currently be using it) we
just create a new virInterface, and let the old one die a dignified
death when its refct goes to 0.
* src/datatypes.c: fix the matching and lifetime of virInterface object
accordingly
* include/libvirt/virterror.h src/virterror.c: if a driver's
virInterfaceLookupByMACString() function finds more than one interface
with the desired MAC Address, this new error is raised.
* src/virsh.c: add a number of interface related commands:
iface-list, iface-name, iface-mac, iface-dumpxml, iface-define,
iface-undefine, iface-edit, iface-start and iface-destroy
Unlike the pty monitor (which we know exists since we scrape its path from
stdout), we have no way of knowing that the unix monitor socket should exist/
be initialized. As a result, some of my KVM guests randomly fail to start on
F10 host.
Try to open the unix socket in a 3 second timeout loop. Ignore EACCES (path
does not exist if a first time run) and ECONNREFUSED (leftover socket from
a previous run hasn't been removed yet). Fixes things for me.
Have storage building functions be definitions of
virStorageBackendBuildVolFrom: we will need to do this in the future anyways
if we ever support the flags attribute.
Break out separate functions for
- Determining the supported '*-img' tool,
- The tool's associated create function,
- Desired function for cloning (CreateXMLFrom).
This will be eventually used to unify cloning across all backends.
Currently, if no format is specified for a new disk volume, we pass the
invalid value "none" as the FS type to 'parted mkpart'.
There doesn't seem to be a way to have parted not format the drive, so
just default to using 'ext2' in this case: this shouldn't cause any harm,
since we are creating a new partition in the first place.
* configure.in: Add --with-qemu-user and --with-qemu-group args
* libvirt.spec.in: use 'qemu' for user/group for Fedora >= 12
* qemud/libvirtd_qemu.arg, qemud/test_libvirtd_qemu.aug,
src/qemu.conf: Add 'user' and 'group' args for configuration
* src/Makefile.am: Create %localstatedir/cache/libvirt/qemu
* src/qemu_conf.c, src/qemu_conf.h: Load user/group from config
* src/qemu_driver.c: Change user ID/group ID when launching QEMU
guests. Change user/group ownership on disks/usb/pci devs.
Put memory dumps in %localstatedir/cache/libvirt/qemu
* src/util.c, src/util.h: Add convenient APIs for converting
username/groupname to user ID / group ID
* src/driver.h: add new driver functions virDrvNumOfDefinedInterfaces
and virDrvListDefinedInterfaces
* src/libvirt.c: implements the entry points, calling new driver
functions
* qemud/remote.c qemud/remote_dispatch_args.h qemud/remote_protocol.[chx]
qemud/remote_dispatch_prototypes.h qemud/remote_dispatch_ret.h
qemud/remote_dispatch_table.h src/remote_internal.c: implement the
client/server side of the RPC
* include/libvirt/libvirt.h[.in]: adds signatures for the new exported
functions virConnectNumOfDefinedInterfaces and
virConnectListDefinedInterfaces
* src/libvirt_public.syms: export the new symbols
Remove redundant error reporting functions which obscured the
filename/line number reporting. Removed code which created a
virDomain/virNetwork object, since those are silently dropped
in error reporting functions now
* src/remote_internal.c: Remove error() and errorf() in favour of
macros, and remove server_error in favour of direct call
Splits up the 'call' method moving generic IO code out into
separate method to allow it to be easily reused for sending
data streams
* src/remote_internal.c: Split 'call' into two methods, the first
with same name serializes a set of method arguments into a
message, the second 'remoteIO' takes a pre-serialized messages,
sends it and awaits a reply
* src/remote_internal.c: Rename processCallRecvMsg to
processCallDispatch, and move code specific to method replies
into processCallDispatchReply, and rename processCallAsyncEvent
to processCallDispatchMessage
The 'remote_message_header' struct has a mis-leadingly named
field 'direction'. It is really a reflection of the type of
message, and some types can be sent in either direction. Thus
the field is more accurately named 'type'. No function change.
* qemud/remote_protocol.x: Rename 'direction' to 'type' in
'remote_message_header. Write better docs describing the
message header field semantics & usage
* qemud/remote_protocol.c, qemud/remote_protocol.h: Regenerate
* qemud/remote.c, qemud/dispatch.c, src/remote_internal.c
Update to reflect rename of 'direction' to 'type'
The naming convention for structs used in the RPC layer is for
incoming requests to be called XXXX_args, and the associated
outgoing reply to be called XXXX_ret. Asynchronously emitted
messages (eg events) are re-using the XXXX_ret naming scheme.
This patch changes that such that async messages are XXXX_msg,
and stops adding entries for them in the dispatch table, avoiding
the need for a dummy no-op implementation.
* qemud/remote.c: Remove dummy remoteDispatchDomainEvent, no
longer required. Update to replace remote_domain_event_ret
with xdr_remote_domain_event_msg
* qemud/remote_protocol.x: Rename remote_domain_event_ret to
remote_domain_event_msg
* qemud/remote_generate_stubs.pl: Adding handling for new
XXX_msg structs.
* src/remote_internal.c: Rename remote_domain_event_ret to
remote_domain_event_msg
* qemud/remote_dispatch_prototypes.h, qemud/remote_dispatch_ret.h,
qemud/remote_dispatch_table.h, qemud/remote_protocol.h,
qemud/remote_protocol.c: auto-regenerate
* src/virsh.c: adds cd and pwd commands to virsh useful for save and
restore commands
* docs/virsh.pod virsh.1: update the documentation
* AUTHORS: add Paolo Bonzini
by running this command:
git ls-files -z | xargs -0 perl -pi -0777 -e 's/\n\n+$/\n/'
This is in preparation for a more strict make syntax-check
rule that will detect trailing blank lines.
* src/remote_internal.c: Disable libvirtd autostart if the
LIBVIRT_AUTOSTART=0 env variable is set
* src/libvirt.c: Document environment variables can impact
the virConnectOpen API
* src/interface_conf.c src/interface_conf.h: the import and export
routines and the internal APIs
* src/Makefile.am: hook the new file in the makefiles
* src/libvirt_private.syms: export a few private symbols internally
* po/POTFILES.in: the new file contains translatable strings
* qemud/remote.c: Send back the actual libvirt connection error
rather than formatting a generic error for security driver
methods
* src/libvirt.c: Fix virDomainGetSecurityLabel, and
virNodeGetSecurityModel to correctly set the error on
the virConnectPtr object, and raise a full error rather
than warning when not supported
The 'pipe' character type wasn't documented.
TCP uses a <protocol> element, not <wire>
We weren't doing strict validation for protocol and source mode values.
* src/domain_conf.c: replace open coded chr type parsing with
virDomainChrTypeFromString(), retaining the existing semantics
where unknown types are silently mapped to the "null" type and
"pty" is used if none is specified
We keep support for the pty based monitor so that we can re-connect
to VMs started by older versions of libvirtd.
* src/domain_conf.c: handle formatting and parsing unix monitors
* src/qemu_driver.c: add qemudOpenMonitorUnix(), remove the monitor
pty path searching from qemudFindCharDevicePTYs(), switch
qemudStartVMDaemon() and qemuDomainXMLToNative() to using a unix
monitor
* tests/qemuxml2argvtest.c: switch to using a unix monitor
* tests/qemuxml2argvdata/qemuxml2argv-*.args: update test data
There are no functional changes in this patch apart from adding the
monitor type to the state XML.
The patch mostly consists of switching to use virDomainChrDef every
where to describe the monitor.
* src/domain_conf.h: replace monitorpath with monitor_chr
* src/domain_conf.c: handle parsing the monitor type and initializing
monitor chr
* src/qemu_conf.[ch]: make qemudBuildCommandLine take a
virDomainChrDefPtr and use that to build the -monitor parameter
* src/qemu_driver.c: split pty specific and common code from
qemudOpenMonitor, have qemudStartVMDaemon() initialize monitor_chr
* tests/qemuxml2argvtest.c: update for qemudBuildCommandLine() change
* src/qemu_driver.c: vm->monitorpath is already initialized in the case
of re-connect, so move the initialization for the normal startup case
out of the common code
* src/qemu_conf.c, src/qemu_conf.h: Use -vga or -std-vga
when starting guests if video card is present
* tests/qemuhelptest.c: Change to use constants instead
of hardcoded hex numbers, and add VGA support
* tests/qemuxml2argvdata/qemuxml2argv-graphics-sdl-fullscreen.xml,
tests/qemuxml2argvdata/qemuxml2argv-graphics-sdl.args,
tests/qemuxml2argvdata/qemuxml2argv-graphics-sdl.xml,
tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-sasl.args,
tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-sasl.xml,
tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-tls.xml,
tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc.xml,
tests/qemuxml2argvdata/qemuxml2argv-input-xen.xml: Add <video>
element for testing graphics adapter
* tests/qemuxml2argvtest.c: Add QEMUD_CMD_FLAG_VGA flag
* tests/qemuxml2xmltest.c: Add missing graphics-vnc-sasl/tls tests
* docs/schemas/domain.rng: Define <video> element schema
* src/domain_conf.c, src/domain_conf.h, src/libvirt_private.syms:
Add parsing and formatting for <video> element
* src/network_driver.c src/node_device.c src/storage_driver.c:
many places in the code reported 'No xxx with matching name" after
a Lookup error without reporting the name used by the failed lookup
Fixes startup of guest's with sourceless cdrom devices.
Patch from Cole Robinson originally posted here:
https://bugzilla.redhat.com/499569
but never sent upstream.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
As pointed out by Tim Waugh here:
https://bugzilla.redhat.com/507555
We shouldn't bother trying to set the context of a file if it already
matches what we want.
(Fixed to use STREQ() and not use tabs, as pointed out by danpb)
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
This patch was posted ages ago here:
https://bugzilla.redhat.com/493692
But was never posted upstream AFAICT.
Patch from Dan Berrange
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
* docs/schemas/network.rng: fix the network schemas to match
new accepted elements, patch by Satoru SATOH
* src/network_conf.c: fix network driver to save the domain name
in XML if present, patch by Satoru SATOH
* AUTHORS: adding Satoru SATOH
Daniel
* src/libvirt.c src/virterror.c: fix some missing comments in public
modules.
* docs/libvirt-api.xml docs/libvirt-refs.xml
docs/devhelp/libvirt-libvirt.html docs/html/libvirt-libvirt.html:
regenerated documentation
* po/*: updated the polish localization and regenerated
Daniel
* docs/logging.html[.in] qemud/libvirtd.conf qemud/qemud.c
src/logging.[ch]: cleanup the logging code and docs to remove
all references to log level 0, cleanup hardcoded values and add
a default VIR_LOG_DEFAULT value, patch by Amy Griffis
daniel
* src/libvirt_private.syms src/parthelper.c src/storage_backend_disk.c
src/storage_conf.c src/storage_conf.h: allow to create storage
volumes on disk backend, patches by Henrik Persson
* AUTHORS: add Henrik Persson
Daniel
* src/Makefile.am src/libvirt.c src/libvirt_private.syms src/logging.c
src/logging.h src/util.c src/libvirt_debug.syms: big cleanup of
the debug configuration option and code by Amy Griffis
daniel
* src/qemu_driver.c: fix a domain state problem after
migration, patch by Federico Simoncelli, fixes#507537
* src/domain_conf.c: fix a transcient domain state problem after
destroy, patch by Federico Simoncelli, fixes#507304
* AUTHORS: add Federico Simoncelli and Javier Fontan
daniel
* configure.in libvirt.spec.in src/Makefile.am
src/opennebula/one_client.[ch] src/opennebula/one_conf.h
src/opennebula/one_driver.[ch] : Finish the integration of OpenNebula,
avoid dependancy on OpenNebula libraries, require xmlrpc-c-devel
and build it by default, based on patch by Javier Fontan and DanB
suggestions
Daniel
If using a custom test driver, storage pool file parsing was broken, and
storage volume parsing was never implemented. Fix these issues, and add
some examples in docs/
The storage driver arranges its parsing routines in a way that make them
difficult to use in the test driver for non-default file parsing. This
refactoring moves things to be consistent with the way domain_conf and
network_conf do things.
If specifying a custom test driver, virtual networks were not 'activated'
on driver init. This differs from the behavior of domains and storage pools,
so fix it. Also improve a couple error messages in that area.
virEnumFromString doesn't check for a NULL string, and will segfault if
passed one. Lots of calling code protects against this, but at least
/pool/@type parsing does not.
CreateXMLFrom changes accidentally caused all raw volume creation to be
fully allocated (as though allocation == capacity). Fix this.
Also force CreateXMLFrom to maintain the previous behavior: sparseness
should still be maintained since we search for holes when copying, and the
clone behavior hasn't been tested with anything but the broken behavior.
Rather than numerous instances of:
emulator = vm->def->emulator;
if (!emulator)
emulator = virDomainDefDefaultEmulator(conn, vm->def, driver->caps);
if (!emulator)
return -1;
Set this value at XML parse time in the domain config, so we can depend on
it for all future emulator accesses. There were unchecked accesses in the
qemu driver that were tripping up on this if no emulator was specified in
the XML, see:
http://www.redhat.com/archives/libvir-list/2008-October/msg00602.html
Certain drivers always need an 'emulator' specified in the XML (qemu and lxc
at least). Store this info in capabilities.
We will eventually use this to move default emulator handling out of
drivers and into domain_conf.*
* src/node_device_hal.c src/node_device_conf.[ch]: add support
for serial number in HAL storage backend, patch by Dave Allan
* docs/schemas/nodedev.rng
tests/nodedevschemadata/storage_serial_3600c0ff000d7a2a5d463ff4902000000.xml:
update the schemas and add a test case, also by Dave Allan
Daniel
The KVM version string can be one of the following:
- qemu-kvm-x.y.z in stable releases
- kvm-XX for kvm versions up to kvm-85
- qemu-kvm-devel-XX for kvm version kvm-86 and later
There are only a few of places where we need to detect
differences between KVM versions based on 0.9.1:
1) VNET_HDR introduced in kvm-74
2) -incoming tcp introduced in kvm-79
3) -incoming exec introduced in kvm-80
4) -incoming stdio in all earlier kvm versions
With qemu-kvm-0.10.x, we can now assume that (1) is available
if it's a KVM release, (2) and (3) is always available and
(4) is never available.
So, from now on we should only need to check the qemu version
number and the "is_kvm" flag for detecting feature availability.
We only need the KVM version number for older releases.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
This patch is purely re-factoring without any functional changes
to make way for the next patch.
The main thing achieved by the refactoring is that we now have
easier access to the parenthesised string that KVM folks seem
to delight in changing.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
* configure.in src/libvirt_private.syms src/storage_backend_fs.c
src/util.c src/util.h: find and use kvm-img, qemu-img or qcow-create
dynamically at runtime, patch by Doug Goldstein
* AUTHORS: add Doug Goldstein
Daniel
* src/Makefile.am src/node_device.[ch] src/node_device_conf.[ch]
src/node_device_hal.[ch] src/node_device_hal_linux.c
src/qemu_driver.c src/remote_internal.c src/storage_backend.c
src/virsh.c src/xen_unified.c tests/nodedevxml2xmltest.c
po/POTFILES.in: implementation for node device create and destroy
in NPIV support, patch by David Allan
Daniel
If two virtual networks have the same hardcoded bridge device (which
prevents them from being active simultaneously) we still want to define
them at daemon startup, so the user has a fighting chance of correcting
the XML error.
Add an extra flag to SetBridge to avoid reporting an error if there is
a bridge collision, and use this when loading network configs at startup.
This regressed via commit 4c3f3b4d.
Parse the command line output a bit earlier so we have a better chance
of reporting the full error output on failure.
I hit this when QEMU would try to boot an invalid kernel (virtinst bug).
There is different spacing when listing active vs. inactive networks. Ex:
Name State Autostart
-----------------------------------------
default active yes
xxxxxx inactive no
* src/qemu_conf.c docs/schemas/domain.rng
tests/capabilityschemadata/caps-qemu-kvm.xml: PPC Qemu Machine Type
changed from g3bw to g3beige some time ago, patch by Thomas Baker
Daniel
* src/opennebula/one_conf.[ch] src/opennebula/one_driver.[ch]:
the OpenNebula driver
* configure.in include/libvirt/virterror.h qemud/Makefile.am
qemud/qemud.c src/Makefile.am src/domain_conf.[ch] src/driver.h
src/libvirt.c src/virterror.c: integration of the OpenNebula
driver in the libvirt infrastructure
* AUTHORS: add Abel Miguez Rodriguez
daniel
* qemud/qemud.c src/console.c src/network_driver.c
src/node_device_conf.c src/node_device_hal.c src/storage_conf.c
src/util.c: cleanup of some direct stderr logging
daniel
There is some funkiness here, since we are either dealing with 2 different
pools (which means validation x 2) or the same pool, where we have to be
careful not to deadlock.
The cap_lost and prop_modified callbacks could deadlock if an existing
device needed to be refreshed, since dev_create expects the driver to
be unlocked.
* docs/schemas/domain.rng src/domain_conf.[ch] src/qemu_driver.c:
extend the generic code for the RDP and desktop extensions of
the graphic tag needed for vbox, patch by Pritesh Kothari
Daniel
Improves readability, particularly wrt the pending CreateFromXML changes.
This will also help implementing File->Block volume creation in the future,
since some of this code will need to be moved to a backend agnostic file.
vol-clone is a convenience function, requiring only a volume to clone and a
new name.
vol-create-from is a direct mapping to the public API, which allows cloning
across pools, converting between formats, etc, but requires an xml file to be
passed
By checking the pid every retry period, we can quickly determine if
the process crashed at startup, rather than make the user wait for
the entire timeout (3 seconds).
virExec will write out the pid of the daemonized process only. Use this
in the QEMU driver, rather than QEMU's pidfile, so we can catch errors we
might miss if the emulator bails early.
Wraps __virExec with the VIR_EXEC_DAEMON flag. Waits on the intermediate
process to ensure we don't end up with any zombies, and differentiates between
original process errors and intermediate process errors.
* src/domain_conf.[ch] docs/schemas/domain.rng: add support
for internal network in the generic part of the code, and
update the Relax-NG grammar accordingly, patch by Pritesh Kothari
daniel
* src/domain_conf.c src/domain_conf.h: parse and save multiple
graphics elements instead of one, patch by Pritesh Kothari
* src/qemu_conf.c src/qemu_driver.c: adapt the qemu/kvm driver for
the new structures, patch by Pritesh Kothari
* src/xend_internal.c src/xm_internal.c: same thing for Xen drivers
Daniel
This change:
Tue Mar 3 08:55:13 GMT 2009 Daniel P. Berrange <berrange@redhat.com>
Don't try to detach & reset PCI devices while running test
suite for XML-> ARGV conversion.
* src/qemu_driver.c: Add qemuPrepareHostDevices() helper to
detach and reset PCI devices.
* src/qemu_conf.c: Don't detach & reset PCI devices while
building the command line argv
accidentally did this:
- if (hostdev->managed) {
+ if (!hostdev->managed) {
Which results in managed='yes' not causing the device to be
detached when the guest is starting.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
* src/vbox/vbox_driver.c src/vbox/vbox_tmpl.c: changes in
VirtualBox driver version detection and move informations
from a global variable into a driver structure, patch by Pritesh
Kothari.
Daniel
* src/libvirt_private.syms src/storage_backend.h
src/storage_backend_fs.c src/storage_conf.h src/storage_driver.c:
drop the pool lock when allocating fs volumes, patch by Cole Robinson
daniel
* configure.in include/libvirt/virterror.h src/Makefile.am
src/domain_conf.[ch] src/driver.h src/virterror.c src/vbox/README
src/vbox/vbox_CAPI_v2_2.h src/vbox/vbox_V2_2.c
src/vbox/vbox_XPCOMCGlue.[ch] src/vbox/vbox_driver.[ch]
src/vbox/vbox_tmpl.c: integration of the VirtualBox support
patches by Pritesh Kothari
Daniel
Seems like a simple typo - it has been "format=" since the flag
was introduced, but we added it as "fmt=".
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Fixes:
CHECK: avoid_if_before_free
src/lxc_container.c: if (oldroot) VIR_FREE(oldroot)
src/lxc_container.c: if (newroot) VIR_FREE(newroot)
Makefile.maint: found useless "if" before "free" above
and:
src/lxc_container.c:317:
Makefile.maint: found trailing blank(s)
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
* src/libvirt_private.syms src/storage_backend_fs.c src/util.c
src/util.h: use posix_fallocate() on supported systems to
allocate diskspace faster, patches by Amit Shah
Daniel
* docs/schemas/domain.rng src/domain_conf.c src/domain_conf.h
src/qemu_conf.c
tests/qemuxml2argvdata/qemuxml2argv-hostdev-pci-address.xml
tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-address.xml
tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-product.xml:
adds a new <hostdev managed='(yes|no)'> property
to host devices indicating whether or not we should
automatically dettach/reset, patch by Mark McLoughlin
daniel
* qemud/remote.c qemud/remote_dispatch_args.h
qemud/remote_dispatch_prototypes.h qemud/remote_dispatch_table.h
qemud/remote_protocol.c qemud/remote_protocol.h
qemud/remote_protocol.x src/remote_internal.c: Implement
attach/reattach/reset in the remote driver, patch by Mark
McLoughlin.
Daniel
* include/libvirt/libvirt.h include/libvirt/libvirt.h.in
src/driver.h src/libvirt.c src/libvirt_public.syms
src/lxc_driver.c src/openvz_driver.c src/qemu_driver.c
src/test.c src/uml_driver.c: add the public APIs for
virNodeDeviceDettach virNodeDeviceReAttach and virNodeDeviceReset
and extends the driver structure accordingly.
Daniel
* configure.in po/POTFILES.in src/Makefile.am src/libvirt_private.syms
src/pci.c src/pci.h: Add implementations of dettach, reattach and
reset for PCI devices, patch by Mark McLoughlin
Daniel
Add support for parsing node device XML descriptions.
This will be used by PCI passthrough related functions to
obtain the PCI device address for a given node device.
The 'asprintf' -> 'virAsprintf' transition made in
[043d702f] "use virAsprintf instead of asprintf" introducted
a build error for 'driver.c' as 'util.h' has to be included.
Signed-off-by: Maximilian Wilhelm <max@rfc2324.org>
The 'getVer' fix introducted in d88d459d [Allow remote://hostname/
style URIs for automatic driver probe...] breaks compiling libvirt
with loadable module support. Work around this to get it building again.
Signed-off-by: Maximilian Wilhelm <max@rfc2324.org>
* configure.in: Enable internal WITH_BRIDGE support not just for LXC or
QEMU, but also for --with-network. Russell Haering reported that
compilation failed when configured with --without-lxc --without-qemu.
Details: http://thread.gmane.org/gmane.comp.emulators.libvirt/11928
* src/bridge.h: Use #if WITH_BRIDGE, rather than currently-equivalent
"#if defined(WITH_QEMU) || defined(WITH_LXC)"
bridge.c: In function 'brSetInetAddr':
bridge.c:665: error: dereferencing pointer '({anonymous})' does break strict-aliasing rules
bridge.c:665: note: initialized from here
bridge.c:666: error: dereferencing pointer '({anonymous})' does break strict-aliasing rules
bridge.c:666: note: initialized from here
Fix qemud.c warnings with gcc-4.4
qemud.c: In function ‘remoteListenTCP’:
qemud.c:675: error: dereferencing pointer ‘sa.72’ does break strict-aliasing rules
qemud.c:675: note: initialized from here
qemud.c:678: error: dereferencing pointer ‘sa.73’ does break strict-aliasing rules
qemud.c:678: note: initialized from here
* src/test.c (testNetworkCreate, testNetworkDefine): Since "def" is
set to NULL immediately after any vir*AssignDef call (to indicate we
no longer own it and to ensure no clean-up path mistakenly frees it),
dereference via net->def->, not def->.
* src/iptables.c: Include "virterror_internal.h".
Use virStrerror, not strerror.
* src/iptables.c (notifyRulesUpdated): Use %s rather than
string-concatenation that made sc_unmarked_diagnostics report
a false-positive.
* src/qemu_driver.c: Use virSetCloseExec and virSetNonBlock,
rather than qemuSet* functions. Suggested by Daniel P. Berrange.
* src/util.c (virSetCloseExec): Publicize.
* src/util.h (virSetCloseExec): Declare
* src/libvirt_private.syms: Add virSetCloseExec.
...thus eliminating many uses of strerror.
(kvmGetMaxVCPUs): Rather than merely warning, diagnose an error
and return -1 upon failure to open KVM_DEVICE. Suggested by
Daniel P. Berrange.
* src/qemu_conf.c (uname_normalize): New function, factored out of...
(qemudBuildCommandLine): ...here. Use the new function.
(qemudExtractVersion): Use it here, rather than hard-coding "i686".
IFF_VNET_HDR is a tun/tap flag that allows you to send and receive
large (i.e. GSO) packets and packets with partial checksums. Setting
the flag means that every packet is proceeded by the same header which
virtio uses to communicate GSO/csum metadata.
By enabling this flag on the tap fds we create, we greatly increase
the achievable throughput with virtio_net.
However, we need to be careful to only set the flag when a) QEMU has
support for this ABI and b) the value of the flag is queryable using
the TUNGETIFF ioctl.
It's nearly five months since kvm-74 - the first KVM release with this
feature - was released. Up until now, we've not added libvirt support
because there is no clean way to detect support for this in QEMU at
runtime. A brief attempt to add a "info capabilities" monitor command
to QEMU floundered. Perfect is the enemy of good enough. Probing the
KVM version will suffice for now.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
* src/virterror.c (virStrerror): New function.
(virReportSystemErrorFull): Don't leak "combined".
In fact, don't even attempt allocation.
Do include the result of formatted print in final diagnostic.
* src/proxy_internal.c (xenProxyCommand): Mark a diagnostic.
* src/xen_unified.c (xenUnifiedOpen, xenUnifiedAddDomainInfo):
Fix unmarked diagnostics by removing the diagnostic altogether:
replace each xenUnifiedError(...,VIR_ERR_NO_MEMORY call with a
call to virReportOOMError.
* src/network_driver.c (networkEnableIpForwarding): This function
would always return 1 (success). Now it returns 0 upon write or
close failure, being careful to preserve any errno from a write failure.
Add comments.
domain shutdown and read saved vm status on libvirtd startup,
last 2 patches from Guido Günther finishing up the surviving the
libvirt daemon restart
daniel
* qemud/qemud.c (remoteReadConfigFile): Don't return 0 (success)
when the config file is unreadable or nonexistent
Return -1, not 0, upon virConfReadFile failure.
(main): If remote_config_file is not specified via --config(-f),
use the default config file only if it exists. Otherwise,
use /dev/null.
* src/conf.c (virConfReadFile): Don't diagnose virFileReadAll
failure, since it already does that.
src/uml_driver.c src/util.c src/util.h src/xen_unified.c:
unify hostname lookup using virGetHostname convenience function,
patch by David Lutterkort
daniel
* configure.in: Provide a new --with-bridge option.
* src/Makefile.am (PRIVSYMFILES) [WITH_BRIDGE]: Append libvirt_bridge.syms.
* src/bridge.c: Test WITH_BRIDGE rather than particular drivers.
* src/libvirt_private.syms: Move bridge-related symbols into...
* src/libvirt_bridge.syms: ...this new file.
Author: John Levon
* src/logging.h src/logging.c: add the infrastructure and internal
APIs for logging, some of those APIs should be made public later
* src/libvirt_sym.version.in: flag the internal APIs as such
daniel
qemudCapsInitNUMA and umlCapsInitNUMA were identical, so this change
factors them into a new function, virCapsInitNUMA, and puts it in
nodeinfo.c.
In addition to factoring out the duplicates, this change also
adjusts that function definition (along with its macros) so
that it works with Fedora 9's numactl version 1, and makes it
so the code will work even if someone builds the kernel with
CONFIG_NR_CPUS > 4096.
Finally, also perform this NUMA initialization for the lxc
and openvz drivers.
* src/nodeinfo.c: Include <stdint.h>, <numa.h> and "memory.h".
(virCapsInitNUMA): Rename from qemudCapsInitNUMA and umlCapsInitNUMA.
(NUMA_MAX_N_CPUS): Define depending on NUMA API version.
(n_bits, MASK_CPU_ISSET): Define, adjust, use uint64 rather than long.
* src/nodeinfo.h: Include "capabilities.h".
(virCapsInitNUMA): Declare it.
* examples/domain-events/events-c/Makefile.am:
* src/Makefile.am: Add $(NUMACTL_CFLAGS) and $(NUMACTL_LIBS) to various
compile/link-related variables.
* src/qemu_conf.c: Include "nodeinfo.h".
(qemudCapsInitNUMA): Remove duplicate code. Adjust caller.
* src/uml_conf.c (umlCapsInitNUMA): Likewise.
Include "nodeinfo.h".
* src/lxc_conf.c: Include "nodeinfo.h".
(lxcCapsInit): Perform NUMA initialization here, too.
* src/openvz_conf.c (openvzCapsInit): And here.
Include "nodeinfo.h".
* src/libvirt_sym.version.in: Add virCapsInitNUMA so that libvirtd
can link to this function.
* src/storage_backend_fs.c: Don't include <endian.h> or <byteswap.h>.
(LV_BIG_ENDIAN, LV_LITTLE_ENDIAN): Define.
Use those instead of __BIG_ENDIAN and __LITTLE_ENDIAN.
This change is required on some kernels due to the way a change in
the kernel's CONFIG_NR_CPUS propagates through the numa library.
* src/qemu_conf.c (qemudCapsInitNUMA): Pass numa_all_cpus_ptr->size/8
as the buffer-length-in-bytes in the call to numa_node_to_cpus, since
that's what is required on second and subseqent calls.
* src/uml_conf.c (umlCapsInitNUMA): Likewise.
This is the second part of the change mentioned here:
http://thread.gmane.org/gmane.comp.emulators.libvirt/10331
It removes the essentially redundant "optname" parameter
from each of the vshCommandOptNetworkBy and vshCommandOptDomainBy
functions as well as the correspond macros (without "By" suffix).
Now, instead of always passing the optname, "domain", to
vshCommandOptDomainBy, that function requires that its command
argument refer to an opts array containing a "domain" option.
This normalization makes one more help-related change:
it renames the net-start "name" argument to the more
sensible and consistent "network".
* src/virsh.c (VSH_BYNAME, vshCommandOptDomain)
(cmd_has_option): New function, used in vshCommandOptDomainBy
and vshCommandOptNetworkBy.
(vshCommandOptDomainBy, vshCommandOptNetworkBy): Remove the optname
parameter, it's always "domain" ("network"). Update all callers.
Call cmd_has_option.
(vshCommandOptNetwork, cmdAutostart, cmdConsole, cmdDomstate)
(cmdDomblkstat, cmdDomIfstat, cmdSuspend, cmdUndefine, cmdStart)
(cmdSave, cmdSchedinfo, cmdDump, cmdResume, cmdShutdown)
(cmdReboot, cmdDestroy, cmdDominfo, cmdVcpuinfo, cmdVcpupin)
(cmdSetvcpus, cmdSetmem, cmdSetmaxmem, cmdDumpXML, cmdDomname)
(cmdDomid, cmdDomuuid, cmdMigrate, cmdNetworkAutostart)
(cmdNetworkDestroy, cmdNetworkDumpXML, cmdNetworkName)
(opts_network_start, cmdNetworkStart, cmdNetworkUndefine)
(cmdNetworkUuid, cmdVNCDisplay, cmdTTYConsole, cmdAttachDevice)
(cmdDetachDevice, cmdAttachInterface, cmdDetachInterface)
(cmdAttachDisk, cmdDetachDisk, cmdEdit)
* src/Makefile.am (virsh-pool-edit.c): This code is generated
from cmdEdit, and cmdEdit uses the vshCommandOptDomain macro which
now, with the changes above, has only 3 (was 4) arguments, yet the
macro use is mapped to vshCommandOptPool, which still requires 4
arguments. So this change adjusts the sed code to reinsert the
just-removed argument -- we're not changing pool-related code right
now, because it's not as straight-forward.
* src/domain_conf.c src/domain_conf.h src/qemu_conf.c
tests/qemuxml2argvtest.c tests/qemuxml2xmltest.c
tests/qemuxml2argvdata/qemuxml2argv-graphics-sdl-fullscreen.args
tests/qemuxml2argvdata/qemuxml2argv-graphics-sdl-fullscreen.xml:
slightly modified patch for SDL fullscreen from Itamar Heim
* docs/formatdomain.html docs/formatdomain.html.in docs/libvirt.rng:
update the schemas and docs about the sdl graphic element attributes
* AUTHORS: add Itamar Heim
Daniel
* src/virsh.c (cmdPoolStart, cmdStart): Change hard-coded
vshCommandOptDomainBy string argument to match just-changed
option name. Cole Robinson reported that "virsh start" was
broken and provided that part of the fix.
Bug introduced by yesterday's "virsh.c: tweak options to produce
more accurate help".
* tests/start: New file. Test for the above fix.
* tests/Makefile.am (test_scripts): Add start.
have udevsettle. So change our tests to prefer udevadm if it exists, but
to fall back to udevsettle if it does not.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
really should be synchronizing against udev. This is generally done by a call
to udevsettle, which is exactly what this patch implements for the storage
backends that are likely to create new /dev nodes. I believe I've read that
even after udevsettle, you are not guaranteed that devices are all the way
created, so we still need the polling in the rest of the sources, but this
should give us a much better chance of things existing as we expect.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
creation of /dev/disk/by-{id,path}, so if we fail to open the directory, retry
up to 5 seconds. This is only likely to happen on hosts that are:
1) diskless (so /dev/disk/by-{id,path} doesn't exist already), and
2) slow, and/or heavily loaded (meaning that udev can take some time to create
the /dev nodes).
Signed-off-by: Chris Lalancette <clalance@redhat.com>
* configure.in docs/* NEWS: release of 0.5.0
* po/*: updated from the translators and merged
* docs/apibuild.py src/libvirt.c: avoid some warnings at doc
generation time
daniel
* tests/virsh-synopsis: new file
* tests/Makefile.am (test_scripts): Add virsh-synopsis.
* src/virsh.c: Correct help SYNOPSIS for each of seven commands.
When I first ran this script, "make check" failed like this:
...
invalid help SYNOPSIS for net-create:
create a network from an XML <file>
invalid help SYNOPSIS for net-define:
define a network from an XML <file>
invalid help SYNOPSIS for net-start:
start <network>
invalid help SYNOPSIS for pool-create:
create a pool from an XML <file>
invalid help SYNOPSIS for pool-define:
define a pool from an XML <file>
invalid help SYNOPSIS for pool-start:
start <pool>
invalid help SYNOPSIS for vol-create:
create <file>
FAIL: virsh-synopsis
* qemud/remote.c qemud/remote_dispatch_localvars.h
qemud/remote_dispatch_proc_switch.h qemud/remote_dispatch_prototypes.h
qemud/remote_protocol.c qemud/remote_protocol.h
qemud/remote_protocol.x src/driver.h src/libvirt.c
src/libvirt_internal.h src/libvirt_sym.version src/lxc_driver.c
src/openvz_driver.c src/qemu_conf.h src/qemu_driver.c
src/remote_internal.c src/test.c src/virsh.c: large patch to
add migration support for KVM/QEmu, based on the work of Rich Jones
and Chris Lalancette. This introduce a new version of the prepare
and finish steps of the migration, so changes the driver API and
a lot of code.
Daniel
ability to resolve any kind of volume path to the pool target volume
path. For instance, if the pool was defined with a
<target><path>/dev/disk/by-id</path></target> section, and one of the
volumes is /dev/disk/by-id/scsi-S_beaf11, then you would be able to
call virStorageVolLookupByPath("/dev/sdc"), and get the correct volume
back.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
* src/socketcompat.h: Remove file.
* src/remote_internal.c: Don't include socketcompat.h.
* qemud/qemud.h: Likewise.
* qemud/remote_protocol.x: Likewise, but do include <arpa/inet.h>
for htonl.
* src/remote_internal.c: Likewise, but do include <errno.h>.
* qemud/remote_protocol.c: Regenererate.
* qemud/remote_protocol.h: Regenererate.
* src/Makefile.am (REMOTE_DRIVER_SOURCES): Remove socketcompat.h.
* src/storage_backend.c (backends): Add a NULL terminator.
(virStorageBackendForType): Use NULL terminator rather than
warning-provoking (possibly 0) array size.
<sources> tags properly, and I didn't put the <source> tag into the
proper place, so I totally changed the output of the discovery XML.
Fix this up to do the right thing.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
* include/libvirt/libvirt.h include/libvirt/libvirt.h.in
src/libvirt.c src/libvirt_sym.version: new libvirt event entry
points, big patch provided by Ben Guthro
* Makefile.am configure.in src/driver.h src/event.c src/event.h
src/internal.h src/libvirt.c src/libvirt_sym.version src/lxc_driver.c
src/openvz_driver.c src/qemu_conf.h src/qemu_driver.c
src/remote_internal.c src/storage_backend_fs.c src/test.c
qemud/event.c qemud/event.h qemud/mdns.c qemud/qemud.c
qemud/qemud.h qemud/remote.c qemud/remote_dispatch_localvars.h
qemud/remote_dispatch_proc_switch.h qemud/remote_dispatch_prototypes.h
qemud/remote_protocol.c qemud/remote_protocol.h
qemud/remote_protocol.x proxy/Makefile.am python/generator.py:
Not much is left untouched by the patch adding the events support
* docs/libvirt-api.xml docs/libvirt-refs.xml
docs/html/libvirt-libvirt.html: regenerated the docs
* examples/domain-events/events-c/Makefile.am
examples/domain-events/events-c/event-test.c: a test example
* AUTHORS: added Ben Guthro
daniel
findPoolSources. Given danpb's last feedback, I completely removed the XML
parsing and did it all with structures. The result should (hopefully) be a lot
easier on the eyes, and is a little more generic.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
cleanup patch, add a ".defaultFormat" member to .poolOptions. In
storage_conf.c, if virXPathString(/pool/source/format/@type) returns NULL, then
set the pool type to .defaultFormat; otherwise, lookup the type via
formatFromString.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
<pool type='logical'>
<source>
<name>MyVG</name>
<device name='/dev/sdb'/>
...
However, dumping out the XML for this same storage pool (with, say, virsh
pool-dumpxml), gives:
<pool type='logical'>
<source>
<name>MyVG</name>
<device name='/dev/sdb'>
</device>
To make this more idempotent, do the <device name='/dev/sdb'/> form by default,
and only do the <device>...</device> form if .nfreeExtent is defined for the
storage pool.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
and virStorage*ToString implementations to the generic VIR_ENUM_IMPL, there were
a couple of places that didn't properly set errors when they failed. This patch
fixes these places up.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
storage XML to libvirtd, which was saved in /etc/libvirt/storage. On subsequent
stop/start of libvirtd, because of another bug , an
error wasn't being set properly in an error path, so libvirtd was SEGV'ing in
storage_conf.c:virStoragePoolObjLoad when trying to dereference the NULL err
returned from virGetLastError(). Make this more robust against errors by always
doing "err ? err->message : NULL" in the printf. I looked around the tree and
found a couple of other places that weren't guarded, so this patch fixes them as
well.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
* Makefile.maint (sync-vcs-ignore-files): New target.
Prompted by a patch from James Morris.
http://thread.gmane.org/gmane.comp.emulators.libvirt/8619/focus=8773
Add all (now-generated) .gitignore files.
* .gitignore: New file.
* build-aux/.gitignore: New file.
* docs/.gitignore: New file.
* docs/devhelp/.gitignore: New file.
* docs/examples/.gitignore: New file.
* docs/examples/python/.gitignore: New file.
* gnulib/lib/.gitignore: New file.
* gnulib/lib/arpa/.gitignore: New file.
* gnulib/lib/netinet/.gitignore: New file.
* gnulib/lib/sys/.gitignore: New file.
* gnulib/tests/.gitignore: New file.
* include/.gitignore: New file.
* include/libvirt/.gitignore: New file.
* po/.gitignore: New file.
* proxy/.gitignore: New file.
* python/.gitignore: New file.
* python/tests/.gitignore: New file.
* qemud/.gitignore: New file.
* src/.gitignore: New file.
* tests/.gitignore: New file.
* tests/confdata/.gitignore: New file.
* tests/sexpr2xmldata/.gitignore: New file.
* tests/virshdata/.gitignore: New file.
* tests/xencapsdata/.gitignore: New file.
* tests/xmconfigdata/.gitignore: New file.
* tests/xml2sexprdata/.gitignore: New file.
iSCSI volumes. This is implemented in the
virStorageBackendUpdateVolInfoFD function, so all future callers will
automatically benefit. This is a somewhat large patch because the
conversion of the virStorageBackendPartTableTypeToString necessitated
a change to the formatToString and formatFromString function pointers,
which caused fallout in other places in the storage stuff. The good
news is that most of these callers are now converted over to the
VIR_ENUM_IMPL, which means a lot of redundant code is now gone.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
POTFILES.in. Add it there, and then fix up one warning about included
c-ctypes.h that wasn't being used.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
* src/storage_backend_logical.c: enable stop pool in logical backend
improve portability when deleting a pool and also call pvremove
patch by Chris Lalancette
Daniel
* src/network_conf.c src/network_conf.h src/qemu_driver.c: add
support for a domain name in network configurations, patch by
JJ Reynolds with bugfix raised by Dan
* src/openvz_conf.c: fix to small bug in openvzReadConfigParam
by Evgeniy Sokolov
Daniel
This patch adds an implementation of the version function to the LXC driver.
The providers use the hypervisor version in a field of one of the instances,
so we need to have something meaningful here. AFAICT, the only real option
we have (considering the limitations of the libvirt version information) is
to use the kernel version.
* src/qemu_conf.c: patch from Cole Robinson to report in the
capabilities only the ones where the emulators is actually found
* po/libvirt.pot: regenerated
* src/libvirt.c: small typo fix
Daniel
* src/storage_backend.h src/storage_backend_logical.c
src/storage_conf.c src/storage_conf.h src/virsh.c:
Applied patches from David Lively to add storage source
elements needed for storage pool
* docs/formatstorage.html docs/formatstorage.html.in: associated
documentation
Daniel
* src/util.c (virFileReadLimFP): New function.
(__virFileReadLimFD): New function.
* src/util.h (__virFileReadLimFD): Declare.
(virFileReadLimFD): Define.
(virFileReadAll): Rewrite to use virFileReadLimFP.
* src/qemu_conf.c: fix serial/telnet to use "server" option
rather than "listen"
* tests/qemuxml2argvdata/qemuxml2argv-serial-tcp-telnet.args:
fix the test case too
* src/domain_conf.c src/domain_conf.h src/qemu_conf.c
src/qemu_driver.c: patch from Guido Günther allowing to add
disk as USB devices
* docs/libvirt.rng: extend the schemas for the new value
* tests/qemuxml2argvdata/qemuxml2argv-disk-usb.args
tests/qemuxml2argvdata/qemuxml2argv-disk-usb.xml
tests/qemuxml2argvtest.c tests/qemuxml2xmltest.c: add a specific
test to the regression suite
Daniel
* src/domain_conf.c src/domain_conf.h src/qemu_conf.c
src/qemu_driver.c: Patch from Guido Günther allowing to pass
usb devices to qemu/kvm
* docs/libvirt.rng: add the new functionality to the grammar
* tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-address.args
tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-address.xml
tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-product.args
tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-product.xml
tests/qemuxml2argvtest.c tests/qemuxml2xmltest.c: adding examples
to the regression tests
* libvirt.spec.in: fix the licence tag
Daniel
Use inet_pton instead; pull in gnulib's module by the same name.
* src/network_conf.c (virNetworkDefParseXML): Use inet_pton,
rather than inet_aton.
* bootstrap (modules): Add inet_pton.
* gnulib/lib/inet_pton.c: New file, from gnulib.
the regression tests. The problem is that the xenDaemonFormatSxpr{Disk,Net}
functions are shared between domain creation time and attaching disk time.
Unfortunately, though, Xend expects something different during these two times.
During domain creation time, it wants the "(device" in front of the sexpr,
while during attach time it does not. To remedy this situation, I added a flag
to these two functions to differentiate between these two modes. With this
patch in place, all of the regression tests pass.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
code, a couple of bugs were introduced into the attach-disk and attach-interface
functionality. This patch fixes 3 bugs:
1) In xenDaemonAttachDevice(), there is a switch statement to determine which
of the xenDaemonFormatSxpr{Disk,Net} functions to call. Unfortunately, the case
statements are all missing the corresponding "break", so we always fall-through
to the default error case. This patch just adds the appropriate break statements.
2) (minor) In xenDaemonDomainDefineXML (that's a mouthful!), there is a stray
"fprintf". This is now converted to a proper virXendError().
3) xenDaemonFormatSxpr{Disk,Net} were adding an extra (device to the front of
the sexpr expressions that xend did not expect (this is Xend on RHEL 5.2).
Because of this, the attaches would fail. The patch fixes this by removing the
(device from the front, which makes attach-disk and attach-interface work again.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
part, this doesn't really concern libvirt, since for things like attach and
detach we just pass it through and let xend worry about whether it is supported
or not. The one place this breaks down is in the stats collecting code, where
we need to figure out the device number so we can go digging in /sys for the
statistics.
To remedy this, I've re-written xenLinuxDomainDeviceID() to use regular
expressions to figure out the device number from the name. The major advantage
is that now xenLinuxDomainDeviceID() looks fairly identical to
tools/python/xen/util/blkif.py (in the Xen sources), so that adding additional
devices in the future should be much easier. It also reduces the size of the
code, and, in my opinion, the code complexity.
With this patch in place, I was able to get block statistics both on older style
devices (/dev/xvda) and on the new, expanded devices (/dev/xvdaa).
Signed-off-by: Chris Lalancette <clalance@redhat.com>
* src/virsh.c: Implement 'virsh edit', 'virsh net-edit' and
'virsh pool-edit' commands. These edit the XML for domains,
networks and storage pools respectively, and are the
equivalent of doing 'virsh dumpxml; vi foo.xml; virsh define'
* src/Makefile.am, src/.cvsignore: Auto-generate the net-edit
and pool-edit commands.
* docs/virsh.pod: Updated the documentation.
* src/domain_conf.c, src/network_conf.c, src/storage_conf.c:
Improve error messages from commands such as 'virsh define'
when the XML is not well-formed by passing libxml2 errors
back out through virterror.
docs/libvirt-refs.xml docs/html/libvirt-libvirt.html src/libvirt.c:
fixed somedocs and API entry point descriptions as suggested by
Charles Duffy and regenerated the API descriptions.
Daniel
Per subject; if autoport is in use for a host, the current
virDomainGraphicsDefFormat code always emits "port=-1", even if a port
is assigned to the host; this leaves no way for a client to find the VNC
port assigned to the host in question.
This patches fixes it by putting the vncport in place if there is one, and
only putting "-1" if we fail that test.
handling code. In particular, if you had a section of XML like:
<disk type='file' device='cdrom'>
<target dev='hdc' bus='ide'/>
<readonly/>
</disk>
This used to work with older libvirt, but now fails. This is because we are
actually passing the literal string (null) to the qemu command-line, which qemu
barfs on. This patch fixes it up by making it blank, which allows qemu to
continue on it's merry way.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
* src/domain_conf.[ch] src/openvz_conf.[ch] src/openvz_driver.c:
patch from Evgeniy Sokolov doing the OpenVZ xml refactoring,
still needs to be ported to the new XML parsing code but
implements the new format.
Daniel
* src/virsh.c (cmdUndefine): Tell user to shutdown and then use name or UUID.
* tests/undefine: New test. Exercise virsh's undefine command.
* tests/Makefile.am (test_scripts): Add undefine.
* src/openvz_conf.c src/openvz_conf.h src/openvz_driver.c
Makefile.maint: patch from Evgeniy Sokolov cleaning up the
error function used and format check based on Jim's fedback.
Daniel
Allow check for containers support to be done without CLONE_NEWNET, and then
determine support on the fly by checking for iproute2 support and a
successful clone(CLONE_NEWNET). This lets us set a flag for later, as well
as not completely disable LXC support on a system without NETNS support.
release
* src/xm_internal.c: fix xm driver serialization escapes
* tests/xmconfigtest.c tests/xmconfigdata/test-escape-paths.cfg
tests/xmconfigdata/test-escape-paths.xml: add test for previous
problem
Daniel
* src/util.c (fread_file_lim): Use VIR_REALLOC_N, not VIR_ALLOC_N.
Bug introduced in 895d0fdf5b.
* tests/Makefile.am (test_scripts): Add read-bufsiz.
* tests/read-bufsiz: New test for the above.
fine, except that is subtly alters the semantics of malloc(), calloc(), and
realloc(). In particular, if you say:
foo = malloc(0);
glibc will happily return a non-NULL pointer to you. However, with the new
memory management stuff, if you say:
foo = VIR_ALLOC(0);
you will actually get a NULL pointer back. Personally, I think this is a
dangerous deviation from malloc() semantics that everyone is used to, and is
indeed causing problems with the remote driver. The short of it is that the
remote driver allocates memory on behalf of the remote side using VIR_ALLOC_N,
and this call is returning NULL so that the NULL checks elsewhere in the code
fire and return failure.
The attached patch fixes this situation by removing the 0 checks from the memory
allocation paths, and just lets them fall through to the normal malloc(),
calloc(), or realloc() routines, restoring old semantics.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
