There's no reason for qemuhotplugtest to reimplement which device
update function to call (testQemuHotplugUpdate()) when
qemuDomainUpdateDeviceLive() already does that. Thus, drop
testQemuHotplugUpdate() and call qemuDomainUpdateDeviceLive()
directly.
BTW: this also shows why reimplementing
qemuDomainUpdateDeviceLive() is bad idea: The
"disk-cdrom-nochange" test is succeeding only because
testQemuHotplugUpdate() supports graphics and returns an
(expected) error for every other devtype.
NB, there's still missing check that the resulting XML is the
expected one (just like we do for attach and detach), but that's
pre-existing and will be fixed later.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
There's no reason for qemuhotplugtest to reimplement which device
attach function to call (testQemuHotplugAttach()) when
qemuDomainAttachDeviceLive() already does that. Thus, drop
testQemuHotplugAttach() and call qemuDomainAttachDeviceLive()
directly.
There's one small catch though, qemuDomainAttachDeviceLive() now
calls one monitor command more (to list all aliases). We don't
care really, because we're not testing that. Therefore, just
provide a dummy reply.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
The testQemuHotplugDetach() already does call
qemuDomainDetachDeviceLive() but only for some device types. For
the rest it reports an error (but only if running test
verbosely). This makes no sense. Just call
qemuDomainDetachDeviceLive() directly and drop
testQemuHotplugDetach().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
There is no good reason for qemuDomainUpdateDeviceLive() to live
in (ever growing) qemu_driver.c while we have qemu_hotplug.c
which already contains the rest of hotplug code. Move the
function to its new home.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
There is no good reason for qemuDomainAttachDeviceLive() to live
in (ever growing) qemu_driver.c while we have qemu_hotplug.c
which already contains the rest of hotplug code. Move the
function to its new home.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
The qemuDomainUpdateDeviceLive() accepts virDomainPtr as one of
its arguments, but use it only to get QEMU driver out of it.
Well, the only caller already does that and thus can pass it
instead of virDomainPtr.
This also makes it look like the rest of device hot(un-)plug
functions: qemuDomainAttachDeviceLive() and
qemuDomainUpdateDeviceLive().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
A new enum type "Default" has been added for Input bus.
The logic that handled default input bus types in
virDomainInputParseXML() has been moved to a new function
virDomainInputDefPostParse() in domain_postparse.c
Link to Issue: https://gitlab.com/libvirt/libvirt/-/issues/8
Signed-off-by: K Shiva <shiva_kr@riseup.net>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The disk private data contain information about the tray and
removability of the disk. Until recently we didn't support hotplug of
removable disks thus it wasn't a problem but now when you can hotplug a
CDROM you would not be able to open its tray.
Fix it by updating the hotplugged disk the same way we do at startup.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2160435
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Extract the logic to update one single disk (without emitting any
events) so that it can be reused when updating the state after a disk
hotplug.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The code compares the 'tray_open' boolean from 'struct
qemuDomainDiskInfo' directly against 'disk->tray_status' which is
declared as virDomainDiskTray (enum). Now the logic works correctly
because the _OPEN enum has value '1'.
Separate the event emission code from the update code and remember the
old tray state in a separate variable rather than having the sneaky
logic we have today.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Spell out that TCP and TLS needs virtproxyd as 'off-host' might mean
that also ssh transport requires it.
Also fix the name of the 'virtproxyd' daemon.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Disabling the daemon timeout is important so that the settings don't get
discarded. Remove the comment saying it's optional and add a paragraph
outlining what to do if it is not available.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We exit early if poolOptions->formatToString is false.
Fixes: 9dadc73029
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
In our meson scripts, we use configure_file(copy:true) to copy
files from srcdir into builddir. However, as of meson-0.64.0,
this is deprecated [1] in favor of using:
fs = import('fs')
fs.copyfile(in, out)
Except, the submodule's new method wasn't introduced until
0.64.0. And since we can't bump the minimal meson version we
require, we have to work with both: new and old versions.
Now, the fun part: fs.copyfile() is not a drop in replacement as
it returns different type (a custom_target object). This is
incompatible with places where we store the configure_file()
retval in a variable to process it further.
While we could just replace 'copy:true' with a dummy
'configuration:...' (say 'configuration: configmake_conf') we
can't do that for binary files (like src/fonts/ or src/images/).
Therefore, places where we are not interested in the retval can
be switched to fs.copyfile() and places where we are interested
in the retval will just use a dummy 'configuration:'.
Except, src/network/meson.build. In here we not just copy the
file but also specify alternative install dir and that's not
something that fs.copyfile() can handle. Yet, using 'copy: true'
is viewed wrong [2].
1: https://mesonbuild.com/Release-notes-for-0-64-0.html#fscopyfile-to-replace-configure_filecopy-true
2: https://github.com/mesonbuild/meson/pull/10042
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
With cgroupv2 this has better effect on the resource allocation. An
excerpt from Documentation/admin-guide/cgroup-v2.rst explains is this
way:
Migrating a process across cgroups is a relatively expensive operation
and stateful resources such as memory are not moved together with the
process. This is an explicit design decision as there often exist
inherent trade-offs between migration and various hot paths in terms
of synchronization cost.
[...]
Setting a non-empty value to "cpuset.mems" causes memory of
tasks within the cgroup to be migrated to the designated nodes if
they are currently using memory outside of the designated nodes.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Most of them are platform devices and only i6300esb can be plugged
multiple times into different PCI slots.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This makes it also work during attach. Also add a test for attaching a
watchdog with incompatible action.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2187278
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The loop initially skipped the first one because it was mainly checking
the incompatible actions, but was then modified to also check the
duplicity of iTCO watchdogs.
While at it change the type of the iteration variable to the usual size_t.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2187133
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We can launch qemu with it, but it will not work since it's not even
probed by the kernel at the mapped address with different machine types
since they are expected to be connected to ISA and not even its newer
LPC counterpart found on q35. And it does not exist on non-x86
architectures.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When starting QEMU, or when hotplugging a PCI device QEMU might
lock some memory. How much? Well, that's an undecidable problem.
But despite that, we try to guess. And it more or less works,
until there's a counter example. This time, it's a guest with
both <hostdev/> and an NVMe <disk/>. I've started a simple guest
with 4GiB of memory:
# virsh dominfo fedora
Max memory: 4194304 KiB
Used memory: 4194304 KiB
And here are the amounts of memory that QEMU tried to lock,
obtained via:
grep VmLck /proc/$(pgrep qemu-kvm)/status
1) with just one <hostdev/>
VmLck: 4194308 kB
2) with just one NVMe <disk/>
VmLck: 4328544 kB
3) with one <hostdev/> and one NVMe <disk/>
VmLck: 8522852 kB
Now, what's surprising is case 2) where the locked memory exceeds
the VM memory. It almost resembles VDPA. Therefore, treat is as
such.
Unfortunately, I don't have a box with two or more spare NVMe-s
so I can't tell for sure. But setting limit too tight means QEMU
refuses to start.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2014030
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
This is a relic of commit v3.7.0-rc1~132 when getter/setter APIs
for dnsmasq's PID were introduced. Previously, obj->dnsmasqPid
was accessed directly. But the aforementioned commit introduced
two calls to virNetworkObjGetDnsmasqPid() even though the result
of the first call is stored in a variable.
Remove the second call as it's unnecessary.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Throughout all of our network driver code we assume that
dnsmasqPid of value -1 means the network has no dnsmasq process
running. There are plenty of calls to:
virNetworkObjSetDnsmasqPid(obj, -1);
or:
pid_t dnsmasqPid = virNetworkObjGetDnsmasqPid(obj);
if (dnsmasqPid > 0) ...;
Now, a virNetworkObj is created via virNetworkObjNew() which
might as well set this de-facto default value.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Assume there's a dnsmasq running (because there's an active
virtual network that spawned it). Now, shut down the daemon,
remove the dnsmasq binary and start the daemon again. At this
point, networkUpdateState() is called, but dnsmasq_caps is NULL
(because networkStateInitialize() called earlier failed to set
them, rightfully though).
Now, the networkUpdateState() tries to read the dnsmasq's PID
file using virPidFileReadIfAlive() which takes a path to the
corresponding binary as one of its arguments. To provide that
path, dnsmasqCapsGetBinaryPath() is called, but since
dnsmasq_caps is NULL, it dereferences it and thus causes a crash.
It's true that virPidFileReadIfAlive() can deal with a removed
binary (well virPidFileReadPathIfAlive() which it calls can), but
iff the binary path is provided in its absolute form. Otherwise,
virFileResolveAllLinks() fails to canonicalize the path
(expected, the path doesn't exist anyway).
Therefore, reading dnsmasq's PID file didn't work before
v8.1.0-rc1~401 which introduced this crash. It was always set to
-1. But passing NULL as binary path instead, makes
virPidFileReadIfAlive() return early, right after the PID file is
read and it's confirmed the PID exists.
Yes, this may yield wrong results, as the PID might be of a
completely different binary. But this problem is preexistent and
until we start locking PID files, there's nothing we can do about
it. IOW, it would require rework of dnsmasq PID file handling.
Fixes: 4b68c982e2
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/456
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It's quite difficult, if not impossible, to create a working RISC-V VMs
using the current default machine type of 'spike_v1.10'. Change the
default to the more appropriate and virtualization friendly 'virt'
machine type.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
It's quite difficult, if not impossible, to create a usable ARM VMs
using the current default machine type of 'integratorcp'. Change the
default to the more appropriate and virtualization friendly 'virt'
machine type.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
I've tried, then I've tried even harder, but still wasn't able to
make sense of our console backcompat code in all its fine
details. Since I value my sanity, let's just forbid hotunplug of
<console/>, especially since detaching of corresponding <serial/>
works.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When cleaning up after removed device, qemuDomainChrRemove() is
called. But this may fail, in which case we successfully ignore
the failure and virDomainChrDefFree() the device anyway. While it
decreases our memory consumption, it's a bit too far, especially
if the next step is 'virsh dumpxml'. Then our memory consumption
decreases all the way down to zero as we crash.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For a running guest, a <serial/> device can be hotunplugged. This
will then remove also aliased <console/>. Trying to hotplug a
<console/> device then, libvirtd crashed because it dereferences
def->consoles while there's none.
Fixes: 42d53ac799
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When removing the compat console from domain defintion, removing
it from the vmdef->consoles array is good, but not sufficient.
The console definition might have been fully allocated (after
daemon restarted and reloaded the status XML). Use
virDomainChrDefFree() to free also the definition.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When hotpluging a <serial/> device, we might need to add a
<console/> device with it (because of some crazy backcompat).
Now, hotplugging is done in several phases. In one of them,
qemuDomainChrPreInsert() allocates space for both devices, and
then qemuDomainChrInsertPreAlloced() actually inserts the device
into domain definition and sets up the <console/> device with it.
Except, the condition that checks whether to create the aliased
<console/> is wrong as it compares nconsoles against 0.
Surprisingly, qemuDomainChrInsertPreAllocCleanup() doesn't suffer
from the same error.
Fixes: daf51be5f1
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
That's already the case in practice, but it's a better
experience for the user if we reject this configuration
outright instead of silently ignoring part of it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit fc216db4fb introduced a mocked test with binary test data
which fails on big endian machines.
Therefore build the viracpitest test only on little endian machines.
Fixes: fc216db4fb
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Similarly to dumpxml, let's have --xpath and --wrap to the
'domcapabilities' command since users might be interested only in
a subset of domcapabilities XML.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
Similarly to dumpxml, let's have --xpath and --wrap to the
'capabilities' command since users might be interested only in a
subset of capabilities XML.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
Indent the example XML block so that it belongs to the paragraph talking
about it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The document grew a bit too much explaining all the mistakes we've seen
the users do when configuring logging. Add a section distilling the
configuration of the most basic scenario which we can refer to when
upstream issues are reported. The scenario is for a runtime setting of
logging into a file applied to the 'virtqemud' daemon.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Follow better meson build system conventions. This allows to find
keymap-gen or CSV without explicitly setting the paths.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
