https://bugzilla.redhat.com/show_bug.cgi?id=1201760
When the domain "<on_crash>coredump-destroy</on_crash>" is set, the
domain wasn't being destroyed, rather it was being rebooted.
Add VIR_DOMAIN_LIFECYCLE_CRASH_COREDUMP_DESTROY to the list of
on_crash types that cause "-no-reboot" to be added to the qemu
command line.
Although defined the same way, fortunately there hadn't been any deviation.
Ensure any assignments to onCrash use VIR_DOMAIN_LIFECYCLE_CRASH_* defs and
not VIR_DOMAIN_LIFECYCLE_* defs
Spice events have mostly similar information present in the event JSON
but they differ in the name of the element containing the port.
The JSON event also provides connection ID which might be useful in the
future.
This patch splits up the event parser code into two functions and the
SPICE reimplements the event parsing with correct names and drops the
VNC only stuff.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1236585
Make sure we only assign the default spicevmc channel name to spicevmc
virtio channels. Caused by commits 3269ee65 and 1133ee2b, which moved
the assignment from XML parsing code to QEMU but failed to keep the
logic.
https://bugzilla.redhat.com/show_bug.cgi?id=1179680
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When support for the pcie-root and dmi-to-pci-bridge buses on a Q35
machinetype was added, I was concerned that even though qemu at the
time allowed plugging a PCI device into a PCIe port, that it might not
be supported in the future. To prevent painful backtracking in the
possible future where this happened, I disallowed such connections
except in a few specific cases requested by qemu developers (indicated
in the code with the flag VIR_PCI_CONNECT_TYPE_EITHER_IF_CONFIG).
Now that a couple years have passed, there is a clear message from
qemu that there is no danger in allowing PCI devices to be plugged
into PCIe ports. This patch eliminates
VIR_PCI_CONNECT_TYPE_EITHER_IF_CONFIG and changes the code to always
allow PCI->PCIe or PCIe->PCI connection *when the PCI address is
specified in the config. (For newly added devices that haven't yet
been given a PCI address, the auto-placement still prefers using the
correct type of bus).
The PCI case of the switch statement in this function contains another
switch statement with a case for each model. Currently every model
except pci-root and pcie-root has a check for index > 0 (since only
those two can have index==0), and the function should never be called
for those two anyway. If we move the check for !pci[e]-root to the top
of the pci case, then we can move the check for index > 0 out of the
individual model cases. This will save repeating that check for the
three new controller models about to be added.
Instead of using qemuMonitorJSONDevGetBlockExtent (which I plan to
remove later) extract the data in place.
Additionally add a flag that will be set when the wr_highest_offset was
extracted correctly so that callers can act according to that.
The test case addition should help make sure that everything works.
So far the argument has not much meaning and was practically ignored.
This is not good since when doing memory hotplug, the size of desired
hugepage backing is passed in that argument. Taking closer look at the
tests I'm fixing reveals the bug. For instance, while the following is
in the test:
<memory model='dimm'>
<source>
<nodemask>1-3</nodemask>
<pagesize unit='KiB'>4096</pagesize>
</source>
<target>
<size unit='KiB'>524287</size>
<node>0</node>
</target>
<address type='dimm' slot='0' base='0x100000000'/>
</memory>
the generated commandline corresponding to this XML was:
-object memory-backend-ram,id=memdimm0,size=536870912,\
host-nodes=1-3,policy=bind
Have you noticed? Yes, memory-backend-ram! Nothing can be further away
from the right answer. The hugepage backing is requested in the XML
and we happily ignore it. This is just not right. It's
memory-backend-file which should have been used:
-object memory-backend-file,id=memdimm0,prealloc=yes,\
mem-path=/dev/hugepages4M/libvirt/qemu,size=536870912,\
host-nodes=1-3,policy=bind
The problem is, that @pagesize passed to qemuBuildMemoryBackendStr
(where this part of commandline is built) was ignored. The hugepage to
back memory was searched only and only by NUMA nodes pinning. This
works only for regular guest NUMA nodes.
Then, I'm changing the hugepages size in the test XMLs too. This is
simply because in the test suite we create dummy mount points just for
2M and 1G hugepages. And in the test 4M was requested. I'm sticking to
2M, but 1G should just work too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1196644
This function constructs the backend (host facing) part of the
memory device. At the beginning, the configured hugepages are
searched to find the best match for given guest NUMA node.
Configured hugepages can have a @nodeset attribute to specify on
which guest NUMA nodes should be the hugepages backing used.
There is, however, one 'corner case'. Users may just tell 'use
hugepages to back all the nodes'. In other words:
<memoryBacking>
<hugepages/>
</memoryBacking>
<cpu>
<numa>
<cell id='0' cpus='0-1' memory='1024000' unit='KiB'/>
</numa>
</cpu>
Our code fails in this case. Well, since there's no @nodeset (nor
any <page/> child element to <hugepages/>) we fail to lookup the
default hugepage size to use.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When migration fails in qemuMigrationPrepareAny, we unconditionally call
qemuDomainRemoveInactive, which should only be called for transient
domains. The check for !vm->persistent was accidentally removed by
commit 540c339.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
This patch provides support for the new watchdog model "diag288".
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Daniel Hansel <daniel.hansel@linux.vnet.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.vnet.ibm.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.vnet.ibm.com>
This patch provides support for a new watchdog action "inject-nmi" which
allows to define an inject of a non-maskable interrupt into a guest.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Daniel Hansel <daniel.hansel@linux.vnet.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.vnet.ibm.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.vnet.ibm.com>
Functions like virDomainOpenConsole() and virDomainOpenChannel() accept
NULL as a dev_name parameter. Try using alias for the error message if
dev_name is not specified.
Before:
error: internal error: character device <null> is not using a PTY
After:
error: internal error: character device serial0 is not using a PTY
Signed-off-by: Luyao Huang <lhuang@redhat.com>
The SCSI Architecture Model defines a logical unit address
as 64-bits in length, so change the field accordingly so
that the entire value could be stored.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
The address elements are all unsigned integers, so we should
use the appropriate print directive when printing it.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Rather than grabbing an arbitrary JSON value and then checking
if it has the right type, we might as well request the correct
type to begin with.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONIOProcessEvent)
(qemuMonitorJSONCommandWithFd, qemuMonitorJSONHandleGraphics)
(qemuMonitorJSONGetStatus, qemuMonitorJSONExtractCPUInfo)
(qemuMonitorJSONGetVirtType, qemuMonitorJSONGetBalloonInfo)
(qemuMonitorJSONGetMemoryStats)
(qemuMonitorJSONDevGetBlockExtent)
(qemuMonitorJSONGetOneBlockStatsInfo)
(qemuMonitorJSONGetAllBlockStatsInfo)
(qemuMonitorJSONBlockStatsUpdateCapacityOne)
(qemuMonitorJSONBlockStatsUpdateCapacity)
(qemuMonitorJSONGetBlockExtent)
(qemuMonitorJSONGetMigrationStatusReply)
(qemuMonitorJSONGetDumpGuestMemoryCapability)
(qemuMonitorJSONAddFd, qemuMonitorJSONQueryRxFilterParse)
(qemuMonitorJSONExtractChardevInfo)
(qemuMonitorJSONDiskNameLookupOne)
(qemuMonitorJSONDiskNameLookup)
(qemuMonitorJSONGetAllBlockJobInfo)
(qemuMonitorJSONBlockIoThrottleInfo, qemuMonitorJSONGetVersion)
(qemuMonitorJSONGetMachines, qemuMonitorJSONGetCPUDefinitions)
(qemuMonitorJSONGetCommands, qemuMonitorJSONGetEvents)
(qemuMonitorJSONGetKVMState, qemuMonitorJSONGetObjectTypes)
(qemuMonitorJSONGetObjectListPaths)
(qemuMonitorJSONGetObjectProps, qemuMonitorJSONGetTargetArch)
(qemuMonitorJSONGetMigrationCapabilities)
(qemuMonitorJSONGetStringArray, qemuMonitorJSONAttachCharDev)
(qemuMonitorJSONGetCPUx86Data, qemuMonitorJSONGetIOThreads)
(qemuMonitorJSONGetMemoryDeviceInfo): Use shorter idioms.
Signed-off-by: Eric Blake <eblake@redhat.com>
There's a small formatting problem in the function. One line is
not correctly indented. Fix this.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This capability specifies that "virt" machine on ARM has PCI controller. Enabled when version is at least 2.3.0.
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
When a connection to the destination host during a p2p migration drops,
we know we will have to cancel the migration; it doesn't make sense to
waste resources by trying to finish the migration. We already do so
after sending "migrate" command to QEMU and we should do it while
waiting for drive mirrors to become ready too.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Checking status of all part of migration and aborting it when something
failed is a complex thing which makes the waiting loop hard to read.
This patch moves all the checks into a separate function similarly to
what was done for drive mirror loops.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Instead of passing current job name to several functions which already
know what the current job is we can generate the name where we actually
need to use it.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Once we start waiting for migration events instead of polling
query-migrate, priv->job.current will not be regularly updated anymore
because we will get the current status directly from the events. Thus
virDomainGetJob{Info,Stats} will have to query QEMU, but they can't just
blindly update priv->job.current structure. This patch introduces
qemuMigrationFetchJobStatus which just fills in a caller supplied
structure and makes qemuMigrationUpdateJobStatus a tiny wrapper around
it.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Move common parts of qemuDomainGetJobInfo and qemuDomainGetJobStats into
a separate API (qemuDomainGetJobStatsInternal).
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
QEMU_CAPS_SEAMLESS_MIGRATION capability says QEMU supports
SPICE_MIGRATE_COMPLETED event. Thus we can just drop all code which
polls query-spice and replace it with waiting for the event.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When libvirtd is restarted during migration, we properly cancel the
ongoing migration (unless it managed to almost finished before the
restart). But if we were also migrating storage using NBD, we would
completely forget about the running disk mirrors.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
"query-block-jobs" QMP command returns all running block jobs at once,
while qemuMonitorBlockJobInfo would only report one. This is not very
nice in case we need to check several block jobs. This patch refactors
the monitor code to always parse all block jobs and store them in a
hash.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
So that they can format private data (e.g., disk private data) stored
elsewhere in the domain object.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
This patch reverts commit 76c61cdca2.
VIR_DOMAIN_DISK_MIRROR_STATE_ABORT says we asked for a block job to be
aborted rather than saying it was aborted. Let's just use
VIR_DOMAIN_DISK_MIRROR_STATE_NONE consistently whenever a block job
finishes since no caller depends on VIR_DOMAIN_DISK_MIRROR_STATE_ABORT
(anymore) to check whether a block job failed or it was cancelled.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Abort migration as soon as we detect that some of the disk mirrors
failed. There's no sense in trying to finish memory migration first.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Instead of cancelling disk mirrors sequentially, let's just call
block-job-cancel for all migrating disks and then wait until all
disappear.
In case we cancel disk mirrors at the end of successful migration we
also need to check all block jobs completed successfully. Otherwise we
have to abort the migration.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
By switching block jobs to use domain conditions, we can drop some
pretty complicated code in NBD storage migration.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Because we are polling we may detect some errors after we asked QEMU for
migration status even though they occurred before. If this happens and
QEMU reports migration completed successfully, we would happily report
the migration succeeded even though we should have cancelled it because
of the other error.
In practise it is not a big issue now but it will become a much bigger
issue once the check for storage migration status is moved inside the
loop in qemuMigrationWaitForCompletion.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The wrapper is useful for calling qemuBlockJobEventProcess with the
event details stored in disk's privateData, which is the most likely
usage of qemuBlockJobEventProcess.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1203032
Implement a `migrate_disks' parameters for the QEMU driver. This multi-
value parameter can be used to explicitly specify what block devices
are to be migrated using the NBD server. Tunnelled migration using NBD
is to be done.
Signed-off-by: Pavel Boldin <pboldin@mirantis.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When playing with disk migration lately, I've noticed this warning in
domain logs:
WARNING: Image format was not specified for 'nbd://masina:49153/drive-virtio-disk0' and probing guessed raw.
Automatically detecting the format is dangerous for raw images, write operations on block 0 will be restricted.
Specify the 'raw' format explicitly to remove the restrictions.
So I started digging into qemu source code to see what has triggered
the warning. I'd expect qemu to know formats of guest's disks since we
tell them on command line. This lead me to qmp_drive_mirror() where
the following can be found:
if (!has_format) {
format = mode == NEW_IMAGE_MODE_EXISTING ? NULL : bs->drv->format_name;
}
So, format is automatically initialized from the disk iff mode !=
"existing". Unfortunately, in migration we are tied to use this mode
(NBD doesn't support creating new images). Therefore the only way to
avoid this warning is to pass format. The discussion on the mail-list [1]
resulted in the code that always forces NBD export as "raw" format.
[1] https://www.redhat.com/archives/libvir-list/2015-June/msg00153.html
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Pavel Boldin <pboldin@mirantis.com>
This function is returning a string (domain XML). Since d3ce7363
when it was first introduced, it was indented incorrectly:
static char
*qemuMigrationBeginPhase(..)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If virDomainObjGetDefs used in qemuDomainPinIOThread would fail the code
would jump to the 'cleanup' label after acquiring the job, thus the VM
would be locked forever.
Introduced in commit cac6d639.
The privileged flag will not change while the configuration might
change. Make the 'privileged' flag member of the driver again and mark
it immutable. Should that ever change add an accessor that will group
reads of the state.
When hotplugging a memory device, there wasn't a check to determine
if there is a conflict with the address space being used by the to
be added memory device and any existing device which is disallowed by qemu.
This patch adds a check to ensure the new device address doesn't
conflict with any existing device.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1220527
This type of information defines attributes of a system
baseboard. With one exception: board type is yet not implemented
in qemu so it's not introduced here either.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Some machine types are only reported as canonical names for other
machine types, which make it a bit harder to find what machine types are
supported by a specific QEMU binary. Ideally, one would just use
/capabilities/guest/arch[@name='...']/machine/text() XPath to get a list
of all supported machine types, but it doesn't work right now.
For example, we report
<machine canonical='pc-i440fx-2.3' maxCpus='255'>pc</machine>
in guest capabilities, but the corresponding
<machine maxCpus='255'>pc-i440fx-2.3</machine>
is missing.
This is a result of QMP probing. With "-machine ?" parsing QEMU sends
us two lines:
pc Standard PC (i440FX + PIIX, 1996) (alias of pc-i440fx-2.3)
pc-i440fx-2.3 Standard PC (i440FX + PIIX, 1996) (default)
while query-machines QMP command reports both in the same entry:
{"name": "pc-i440fx-2.3", "is-default": true, "cpu-max": 255, "alias": "pc"}
Let's make sure we always report separate <machine/> for both the
canonical name and its alias and using the canonical name as the default
machine type (i.e., inserting it before its alias) in case is-default is
true.
https://bugzilla.redhat.com/show_bug.cgi?id=1229666
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The search for the memory balloon driver object is extended by a
second known name "virtio-balloon-ccw" in support for virtio-ccw.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Daniel Hansel <daniel.hansel@linux.vnet.ibm.com>
Reviewed-by: Eric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.vnet.ibm.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1021480
Seems the property has been deprecated for qemu, although seemingly ignored.
This patch enforces from a libvirt perspective that a scsi-block 'lun'
device should not provide the 'serial' property.
If a guest has multiple network devices with the same MAC address,
when we online update the second device, libvirtd always updates
the first one.
commit def31e4c forgot to fix the online updating scenario. We need to
use virDomainNetFindIdx() to find the correct network device.
Signed-off-by: Zhou Yimin <zhouyimin@huawei.com>
Signed-off-by: Zhang Bo <oscar.zhangbo@huawei.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1228007
When attaching a scsi volume lun via the attach-device --config or
--persistent options, there was no translation of the source pool
like there was for the live path, thus the attempt to modify the config
would fail since not enough was known about the disk.
With a few exceptions, we assume that qemu binary for given
architecture has form of qemu-system-$arch. Well, openrisc is yet
another exception. It's binary is called qemu-system-or32.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Move all the system_* fields into a separate struct. Not only this
simplifies the code a bit it also helps us to identify whether BIOS
info is present. We don't have to check all the four variables for
being not-NULL, but we can just check the pointer to the struct.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Move all the bios_* fields into a separate struct. Not only this
simplifies the code a bit it also helps us to identify whether BIOS
info is present. We don't have to check all the four variables for
being not-NULL, but we can just check the pointer to the struct.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This patch adds the support of queues attribute of the driver element
for vhost-user interface type. Example:
<interface type='vhostuser'>
<mac address='52:54:00:ee:96:6d'/>
<source type='unix' path='/tmp/vhost2.sock' mode='client'/>
<model type='virtio'/>
<driver queues='4'/>
</interface>
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1207692
Signed-off-by: Maxime Leroy <maxime.leroy@6wind.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The support for this was added in QEMU with commit
830d70db692e374b55555f4407f96a1ceefdcc97. Unfortunately we have to do
another ugly version-based capability check. The other option would be
not to check for the capability at all and leave that to qemu as it's
done with multiqueue tap devices.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
By default, getaddrinfo() will return addresses for both
IPv4 and IPv6 if both protocols are enabled, and so the
RPC code will listen/connect to both protocols too. There
may be cases where it is desirable to restrict this to
just one of the two protocols, so add an 'int family'
parameter to all the TCP related APIs.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
qemu 2.3.0 added the -cpu host,aarch64=off option, which allows using
qemu-system-aarch64 KVM to run armv7l VMs.
Add a capabilities check for it, wire it up in qemu_command, and test
the command line generation.
When traversing through the QOM tree, we're looking for
a link to a device, e.g.:
link<virtio-balloon-pci>
Introduce a helper that will format the link name at the start,
instead of doing it every time while recursing through the tree.
In qemuDomainUpdateCurrentMemorySize I misplaced the actual update of
the balloon size to a place where it may not be initialized. Move it a
few lines above.
When getting block device I/O tuning data there is no check for whether
QEMU supports such options and the call fails on
qemuMonitorGetBlockIoThrottle() when getting the particular throttle
data. So try reporting a better error when blkdeviotune is not
supported.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1224053
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
In the pre-NUMA ages pinning a vCPU to all pCPUs was eaqual to deleting
the pinning info. Now it does not entirely work that way. Pinning a vCPU
to all pCPUs might be a desired operation. Additionally removal of the
pinning will result into using the default pinning information at the
next boot which might be different from all vcpus.
This patch removes the false assumption that we should remove the
pinning after pinning to all vCPUs and tweaks the documentation for
virsh.
A later patch will implement a new flag for the virDomainPinVcpuFlags
API that will allow to remove the pinning in a sane way.
While we probably won't see machines with more than 65536 cpus for a
while lets store the cpu count as an integer so that we can avoid quite
a lot of overflow checks in our code.
Since the returned structure uses "unsigned long" for memory sizes add a
few overflow checks to notify the user in case we are not able to
represent given values.
When qemu does not support the balloon event the current memory size
needs to be queried. Since there are two places that implement the same
logic, split it out into a function and reuse.
After libvirt issues the balloon resize command, the current balloon
size needs to be changed to the maximum memory size since the vCPUs were
not started and thus the balloon driver could not return the memory.
Since GetXMLDesc and other APIs return the balloon size without updating
it in case they are not able to obtain the job and the memory balloon
does not support the asynchronous event the sizing might be incorrect.
Refactor the function to return the bitmap instead of an integer and the
inner workings so that they make more sense.
This patch also fixes possible segfault on old systems that was
introduced by commit:
commit f1a43a8e41
Author: Hu Tao <hutao@cn.fujitsu.com>
Date: Fri Sep 14 15:46:59 2012 +0800
use virBitmap to store cpu affinity info
Since the monitor code now supports ullongs when setting balloon size,
drop the legacy code with overflow checking.
Additionally the comment mentioning that the job is treated as a sync
job does not make sense any more since the monitor is entered
asynchronously.
Store the emulator pinning cpu mask as a pure virBitmap rather than the
virDomainPinDef since it stores only the bitmap and refactor
qemuDomainPinEmulator to do the same operations in a much saner way.
As a side effect virDomainEmulatorPinAdd and virDomainEmulatorPinDel can
be removed since they don't add any value.
In case when <vcpu ... cpuset=""> is not specified, the vcpupin array is
not guaranteed to be allocated to def->vcpus. This would cause a crash
for TCG since it does not report thread IDs for vCPUs.
Commit id '980b265d' neglected to check for a successful status when
deciding whether to release the device address for the RNG attach thus
the address would be released even though the device was added.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Commit id '862473fa' neglected to return the status from the
qemuDomainRemoveRNGDevice call in qemuDomainRemoveDevice causing
the function to always fail when receiving an RNG device unplug
event. Additionally the domain status/state would not be updated
in the processDeviceDeletedEvent path.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
The guest firmware provides the same functionality as the pvpanic
device, and the relevant element should always be present in the
domain XML to reflect this fact, so add it after parsing the
definition if it wasn't there already.
The guest firmware provides the same functionality as the pvpanic
device, which is not available in QEMU on pSeries, so the domain
XML should be allowed to contain the <panic> element.
On the other hand, unlike the pvpanic device, the guest firmware
can't be configured, so report an error if an address has been
provided in the XML.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1182388
When attempting to hotplug a virtio-serial console to a domain
that had no virtio-serial controllers (not even those that
are added by libvirt when some devices need them) at daemon startup,
report a user-friendly error:
error: Failed to attach device from console.xml
error: internal error: no virtio-serial controllers are available
instead of crashing the daemon:
Process terminating with default action of signal 11 (SIGSEGV): dumping core
Access not within mapped region at address 0x8
at 0x531028F: virDomainVirtioSerialAddrNext (domain_addr.c:916)
by 0x531028F: virDomainVirtioSerialAddrAssign (domain_addr.c:1029)
by 0x1CBF68: qemuDomainAttachChrDevice (qemu_hotplug.c:1565)
by 0x1BCD5E: qemuDomainAttachDeviceLive (qemu_driver.c:7997)
by 0x1BCD5E: qemuDomainAttachDeviceFlags (qemu_driver.c:8743)
Introduced in v1.2.14-30-g5903378.
The QMP command, like the interrupt reinjection logic it's connected
to, is only implemented in QEMU when TARGET_I386 is defined, so
checking for its availability on any other architecture is pointless.
On the other hand, when we're on x86, we shouldn still make sure that
rtc-reset-reinjection is available and refuse to set the time
otherwise.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1211938
Since commit bcd9a564b6 virDomainNumatuneGetMode returns the value
via a pointer rather than in the return value. The change triggered
problems with platforms where the compiler decides to use a data type of
size different than integer at the point where we typecast it.
Work around the issue by using an intermediate variable of the correct
type that gets casted back by the default typecasting rules.
Rather than an algorithm based solely on libvirtd ctime to refresh the
capabilities add the element of the libvirt build version into the equation.
Since that version wouldn't be there prior to this code being run - don't
fail on reading the capabilities if not found. In this case, the cache
will always be rebuilt when a new libvirt version is installed.
https://bugzilla.redhat.com/show_bug.cgi?id=1195882
Original commit id 'cbde3589' indicates that the cache file would be
discarded if either the QEMU binary or libvirtd 'ctime' changes; however,
the code only discarded if the QEMU binary time didn't match or if the
new libvirtd ctime was later than what created the cache file.
Since many factors come into play with 'ctime' adjustments (including
perhaps turning back the hands of time), change the logic to also force
a refresh if the ctime of libvirt is different than what's in the cache.
Recent changes to the -M/--machine processing code in qemuParseCommandLine
caused Coverity to determine there was a possible resource leak with how
the 'list' is managed. Rather than try to add virStringFreeList calls
everywhere - just promote list to the top of the variables and free it
within the error processing code. Also required a couple of other tweaks
in order to avoid double free's.
Not every chardev is plugged onto virtio-serial bus. However, the
code introduced in 89e991a2aa assumes that. Incorrectly.
With previous patches we have three options where a chardev can
be plugged: virtio-serial, USB and PCI. This commit fixes the
detach part. However, since we are not auto allocating USB
addresses yet, I'm just marking the place where appropriate code
should go.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Not every chardev is plugged onto virtio-serial bus. However, the
code introduced in 89e991a2aa assumes that. Incorrectly.
With previous patches we have three options where a chardev can
be plugged: virtio-serial, USB and PCI. This commit fixes the
attach part. However, since we are not auto allocating USB
addresses yet, I'm just marking the place where appropriate code
should go.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=998813
Implementation is pretty straight-forward. Of course, not all qemus
out there supports the device, so new capability is introduced and
checked prior each use of the device.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Most virDomainDiskIndexByName callers do not care about the index; what
they really want is a disk def pointer.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When starting a domain, if a domain specifies security drivers we do not have
loaded, we fail. However we don't check for this during
reconnect, so any operation relying on security driver functionality would fail.
If someone e.g. starts a domain with selinux driver loaded, then they change
the security driver to 'none' in config, restart the daemon and call dump/save/..,
QEMU will return an error.
As we shouldn't kill the domain, we should at least log an error to let the
user know that domain reconnect wasn't completely clean.
https://bugzilla.redhat.com/show_bug.cgi?id=1183893
So far, we are not reporting if numatune was even defined. The
value of zero is blindly returned (which maps onto
VIR_DOMAIN_NUMATUNE_MEM_STRICT). Unfortunately, we are making
decisions based on this value. Instead, we should not only return
the correct value, but report to the caller if the value is valid
at all.
For better viewing of this patch use '-w'.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=976387
For a domain configured using the host cdrom, we should taint the domain
due to problems encountered when the host and guest try to control the tray.
Since af2a1f0587,
qemuDomainGetNumaParameters() returns invalid value for a running
guest. The problem is that it is getting the information from cgroups,
but the parent cgroup is being left alone since the mentioned commit.
Since the running guest's XML is in sync with cgroups, there is no need
to look into cgroups (unless someone changes the configuration behind
libvirt's back). Returning the info from the definition fixes a bug and
is also a cleanup.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1221047
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
For some reason a union (_virNodeDevCapData) that had only been
declared inside the toplevel struct virNodeDevCapsDef was being used
as an argument to functions all over the place. Since it was only a
union, the "type" attribute wasn't necessarily sent with it. While
this works, it just seems wrong.
This patch creates a toplevel typedef for virNodeDevCapData and
virNodeDevCapDataPtr, making it a struct that has the type attribute
as a member, along with an anonymous union of everything that used to
be in union _virNodeDevCapData. This way we only have to change the
following:
s/union _virNodeDevCapData */virNodeDevCapDataPtr /
and
s/caps->type/caps->data.type/
This will make me feel less guilty when adding functions that need a
pointer to one of these.
Introduces two new -machine option parameters to the QEMU command to
enable/disable the CPACF protected key management operations for a guest:
aes-key-wrap='on|off'
dea-key-wrap='on|off'
The QEMU code maps the corresponding domain configuration elements to the
QEMU -machine option parameters to create the QEMU command:
<cipher name='aes' state='on'> --> aes-key-wrap=on
<cipher name='aes' state='off'> --> aes-key-wrap=off
<cipher name='dea' state='on'> --> dea-key-wrap=on
<cipher name='dea' state='off'> --> dea-key-wrap=off
Signed-off-by: Tony Krowiak <akrowiak@linux.vnet.ibm.com>
Signed-off-by: Daniel Hansel <daniel.hansel@linux.vnet.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We have previously effectively ignored all <controller type='ide'>
elements in a domain definition.
On the i440fx-based machinetypes there is an IDE controller that is
included in the chipset and can't be removed (which is the ide
controller with index='0'>), so it makes sense to ignore that one
controller. However, if an i440fx domain definition has a 2nd
controller, nothing catches this error (unless you also have a disk
attached to it, in which case qemu will complain that you're trying to
use the ide controller named "ide1", which doesn't exist), and if any
other type of domain has even a single controller defined, it will be
incorrectly ignored.
Ignoring a bogus controller definition isn't such a big problem, as
long as an error is logged when any disk is attached to that
non-existent controller. But in the case of q35-based machinetypes,
the hardcoded id ("alias" in libvirt terms) of its builtin SATA
controller is "ide", which happens to be the same id as the builtin
IDE controller on i440fx machinetypes. So libvirt creates a
commandline believing that it is connecting the disk to the builtin
(but actually nonexistent) IDE controller, qemu thinks that libvirt
wanted that disk connected to the builtin SATA controller, and
everybody is happy.
Until you try to connect a 2nd disk to the IDE controller. Then qemu
will complain that you're trying to set unit=1 on a controller that
requires unit=0 (SATA controllers are organized differently than IDE
controllers).
After this patch, if a domain has an IDE controller defined for a
machinetype that has no IDE controllers, libvirt will log an error
about the controller itself as it is building the qemu commandline
(rather than a (possible) error from qemu about disks attached to that
controller). This is done by adding IDE to the list of controller
types that are handled in the loop that creates controller command
strings in qemuBuildCommandline() (previously it would *always* skip
IDE controllers). Then qemuBuildControllerDevStr() is modified to log
an appropriate error in the case of IDE controllers.
In the future, if we add support for extra IDE controllers (piix3-ide
and/or piix4-ide) we can just add it into the IDE case in
qemuBuildControllerDevStr(). For now, nobody seems anxious to add
extra support for an aging and very slow controller, when there are so
many better options available.
Resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=1176071 (Fedora)
This makes sure that that the commandlines generated for devices and
controller devices are all using the alias that has been set in the
controller's object as the id of the controller, rather than
hardcoding a printf (or worse, encoding exceptions to the standard
${controller}${index} into the logic)
Since this "fixes" the controller name used for the sata controller,
the commandline arg for the sata controller in the sata test case had
to be adjusted to be "sata0" instead of "ahci0". All other tests
remain unchanged, verifying that the patch causes no other functional
change.
Because the function that finds a controller alias based on a device
def requires a pointer to the full domainDef in order to get the list
of controllers, the arglist of a few functions had to have this added.
There are a few extra exceptions that weren't being accounted for when
creating the alias for a controller. This resulted in 1) incorrect
status XML, and 2) exceptions/printfs of what *should* have been
directly available in the controller alias when constructing device
commandline arguments:
1) The primary (and only) IDE controller on a 440FX machinetype is
hardcoded to be "ide" in qemu.
2) The primary SATA controller on a 440FX machinetype is also
hardcoded to be "ide" in qemu.
3) On machinetypes that don't support multiple PCI buses, the PCI bus
is hardcoded in qemu to have the name "pci".
4) The first usb master controller is "usb", all others are the normal
"usb%d". (note that usb controllers that are not a "master" will have
the same index, and thus alias, as the master).
We needed to pass in the full domainDef and qemuCaps in order to
properly make the decisions about these exceptions.
When cancelling drive mirror, always try to do that for all disks even
if it fails for some of them. Report the first error we saw.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Instead of redoing the same filtering over and over everytime we need to
walk through all disks which are being migrated.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
As of eeb008dbfc the variable is not used anymore. Drop it.
Signed-off-by: Wang Yufei <james.wangyufei@huawei.com>
Signed-off-by: Zhang Bo <oscar.zhangbo@huawei.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In the XML we have the vnc port number, but QEMU takes on command line
a vnc screen number, it's port-5900. We should fail with error message
that only ports in range [5900,65535] are valid.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1164966
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1220809
When cold-plugging an RNG device but something fails in
qemuDomainAssignAddresses, we will double free the RNG device.
Once a device is plugged into the domain, we should set the
device pointer to NULL to fix this issue.
...
5 0x00007fb7d180ac8a in virFree at util/viralloc.c:582
6 0x00007fb7d1895cdd in virDomainRNGDefFree at conf/domain_conf.c:19786
7 0x00007fb7d1895d99 in virDomainDeviceDefFree at conf/domain_conf.c:2022
8 0x00007fb7b92b8baf in qemuDomainAttachDeviceFlags at qemu/qemu_driver.c:8785
9 0x00007fb7d190c5d7 in virDomainAttachDeviceFlags at libvirt-domain.c:8488
10 0x00007fb7d23af9d2 in remoteDispatchDomainAttachDeviceFlags at remote_dispatch.h:2842
...
Signed-off-by: Luyao Huang <lhuang@redhat.com>
The code to add device type to the commandline was identical for lsi
and other models of SCSI controllers, but was duplicated (with the
exception of a minor ordering difference of the if-else clauses) for
the two cases. This patch replaces those two with a single instance of
the code just before the if().
This patch makes qemuValideDevicePCISlotsChipsets() more consistent in
appearance by replacing several clauses of an if with the equivalent
call to qemuDomainMachineIsI440FX. The if was checking exactly the
same items, just in a slightly different order.
Since libvirt doesn't call to update the new balloon size in qemu add
code that will handle tweaking of the size of the current balloon
statistic until qemu reports the new size using the event.
Use the new domain list collection helpers to avoid going through
virDomainPtrs.
This additionally implements filter capability when called through the
api that accepts domain list filters.
Extend it to a universal helper used for clearing lists of any objects.
Note that the argument type is specifically void * to allow implicit
typecasting.
Additionally add a helper that works on non-NULL terminated arrays once
we know the length.
https://bugzilla.redhat.com/show_bug.cgi?id=890648
So, imagine you've issued an API that involves guest agent. For
instance, you want to query guest's IP addresses. So the API acquires
QUERY_JOB, locks the guest agent and issues the agent command.
However, for some reason, guest agent replies to initial ping
correctly, but then crashes tragically while executing real command
(in this case guest-network-get-interfaces). Since initial ping went
well, libvirt thinks guest agent is accessible and awaits reply to the
real command. But it will never come. What will is a monitor event.
Our handler (processSerialChangedEvent) will try to acquire
MODIFY_JOB, which will fail obviously because the other thread that's
executing the API already holds a job. So the event handler exits
early, and the QUERY_JOB is never released nor ended.
The way how to solve this is to put flag somewhere in the monitor
internals. The flag is called @running and agent commands are issued
iff the flag is set. The flag itself is set when we connect to the
agent socket. And unset whenever we see DISCONNECT event from the
agent. Moreover, we must wake up all the threads waiting for the
agent. This is done by signalizing the condition they're waiting on.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Running shutdown with mode agent on a shutoff domain gives cryptic
error message:
virsh # shutdown --mode agent gentoo
error: Failed to shutdown domain gentoo
error: Guest agent is not responding: QEMU guest agent is not connected
After this patch, the error is more clear:
virsh # shutdown --mode agent gentoo
error: Failed to shutdown domain gentoo
error: Requested operation is not valid: domain is not running
Reported-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Allow ccw devices to be used with multiqueues. ccw provides a one to
one relation of fds to queues and does not support the vectors option.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Reviewed-by: Daniel Hansel <daniel.hansel@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Coverity points out that qemuMonitorGetAllBlockStatsInfo could return a
-1 and thus not fill in 'stats' (leaving it NULL). Then the call to
qemuMonitorBlockStatsUpdateCapacity will dereference it.
Coverity complains over the [n]values pairing in virQEMUCapsFreeStringList
and rather than make a bunch if "if values" checks prior to calling, by
just adding the values check inside the free function we avoid the chance
that somehow nvalues is > 0, while values == NULL
Coverity points out it was possible to have a zero return from
qemuBuildRNGBackendProps thus not filling in 'props' and then
causing a NULL dereference on the next call.
Coverity notes that ->ifname is used after the VIR_FREE done in the
code path after the call to virNetDevMacVLanDeleteWithVPortProfile
by a call to virNetDevOpenvswitchRemovePort.
Since the ->ifname will be VIR_FREE()'d eventually in virDomainNetDefFree
just remove the extraneous VIR_FREE here.
When originally added, the Openvswitch code wasn't present and checks
were made for non NULL prior to use.
Coverity complains that in the error paths both the < 0 condition and
the success path after the qemuDomainObjExitMonitor failure will end
up going to cleanup. So just use ignore_value in this error path to
resolve the complaint.
The only version that's supported in QEMU is version 2, currently.
Fortunately, it is enabled by aarch64 automatically, so there's
nothing for us that needs to be put onto command line.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When migrating a domain while changing its name and using
VIR_MIGRATE_PERSIST_DEST flag, libvirt would fail to properly change the
name in the persistent definition. The inconsistency results in weird
behavior when dumping domain XML, destroying the domain, restarting
libvirtd and likely in several other situations.
Since the new name is already stored in vm->def->name, we just need to
make sure the persistent definition uses this new name too.
https://bugzilla.redhat.com/show_bug.cgi?id=1076354
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Set the capability based on qmp query, or qemu version. The qmp query
includes vmport with 2.2, but no longer with 2.3. It lists only
non-machine specific capabilities, so check the qemu version too until a
machine-specific query is supported.
Now that we have macros for exclusive flags and flag requirements we can
use them to cleanup the code for setvcpus and error out for all wrong
flag combination.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Found by Laine and discussed a bit on internal IRC.
Commit id c56fe7f1d6 added support for creating a command line to support
scsi-disk.channel.
Series was here:
http://www.redhat.com/archives/libvir-list/2012-February/msg01052.html
Which pointed to a design proposal here:
http://permalink.gmane.org/gmane.comp.emulators.libvirt/50428
Which states (in part):
Libvirt should check for the QEMU "scsi-disk.channel" property. If it
is unavailable, QEMU will only support channel=lun=0 and 0<=target<=7.
However, the check added was ensuring that bus != lun *and* bus != 0. So
if bus == lun and both were non zero, we'd never make the second check.
Changing this to an *or* check fixes the check, but still is less readable
than the just checking each for 0
Since the qemu capabilities are not initialized for offline VMs the
caller might get suboptimal error message:
$ virsh blockjob VM PATH --bandwidth 1
error: unsupported configuration: block jobs not supported with this QEMU binary
Move the checks after we make sure that the VM is alive.
In qemuMigrationDriveMirror we can start all disk mirrors in parallel.
We wait until they are all ready, or one of them aborts.
In qemuMigrationCancelDriveMirror, we wait until all mirrors are
properly stopped. This is necessary to ensure that destination VM is
fully in sync with the (paused) source VM.
If a drive mirror can not be cancelled, then the destination is not in a
consistent state. In this case it is not safe to continue with the
migration.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
The !modern code path needs to call qemuBlockJobEventProcess directly.
the modern code path will call it via qemuBlockJobSyncWait.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
Other threads may be blocked in qemuBlockJobSyncWait. Ensure that
they're woken up when the domain is stopped.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
qemuBlockJobSyncBegin and qemuBlockJobSyncEnd delimit a region of code
where block job events are processed "synchronously".
qemuBlockJobSyncWait and qemuBlockJobSyncWaitWithTimeout wait for an
event generated by a block job.
The Wait* functions may be called multiple times while the synchronous
block job is active. Any pending block job event will be processed by
only when Wait* or End is called. disk->blockJobStatus is reset by
these functions, so if it is needed a pointer to a
virConnectDomainEventBlockJobStatus variable should be passed as the
last argument. It is safe to pass NULL if you do not care about the
block job status.
All functions assume the VM object is locked. The Wait* functions will
unlock the object for as long as they are waiting. They will return -1
and report an error if the domain exits before an event is received.
Typical use is as follows:
virQEMUDriverPtr driver;
virDomainObjPtr vm; /* locked */
virDomainDiskDefPtr disk;
virConnectDomainEventBlockJobStatus status;
qemuBlockJobSyncBegin(disk);
... start block job ...
if (qemuBlockJobSyncWait(driver, vm, disk, &status) < 0) {
/* domain died while waiting for event */
ret = -1;
goto error;
}
... possibly start other block jobs
or wait for further events ...
qemuBlockJobSyncEnd(driver, vm, disk, NULL);
To perform other tasks periodically while waiting for an event:
virQEMUDriverPtr driver;
virDomainObjPtr vm; /* locked */
virDomainDiskDefPtr disk;
virConnectDomainEventBlockJobStatus status;
unsigned long long timeout = 500 * 1000ull; /* milliseconds */
qemuBlockJobSyncBegin(disk);
... start block job ...
do {
... do other task ...
if (qemuBlockJobSyncWaitWithTimeout(driver, vm, disk,
timeout, &status) < 0) {
/* domain died while waiting for event */
ret = -1;
goto error;
}
} while (status == -1);
qemuBlockJobSyncEnd(driver, vm, disk, NULL);
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
We will want to use synchronous block jobs from qemu_migration as well,
so split this function out into a new source file.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
The documentation states that for shallow block copy the image has to
have the same guest visible content as backing file of the current
image if the file is being reused. This condition can be achieved also
with a raw file (or a qcow without a backing file) so remove the
condition that would disallow it.
(This patch additionally fixes crash described in
https://bugzilla.redhat.com/show_bug.cgi?id=1215569 )
It would be used in qemumonitorjsontest, thus we make it non-static.
Signed-off-by: Zhang Bo <oscar.zhangbo@huawei.com>
Signed-off-by: Zhou Yimin <zhouyimin@huawei.com>
If we received zero iothreads from the monitor, but were perhaps
expecting to receive something, then the code was skipping the check
to ensure what's in the monitor matches our expectations. So invert
the checks to check that what we get back matches expectations and
then check there are zero iothreads returned.
Rather than have a separate routine to parse the alias of an iothread
returned from qemu in order to get the iothread_id value, parse the alias
when returning and just return the iothread_id in qemuMonitorIOThreadInfoPtr
This set of patches removes the function, changes the "char *name" to
"unsigned int" and handles all the fallout.
Coverity notes that the switch() used to check 'connected' values has
two DEADCODE paths (_DEFAULT & _LAST). Since 'connected' is a boolean
it can only be one or the other (CONNECTED or DISCONNECTED), so it just
seems pointless to use a switch to get "all" values. Convert to if-else
Add qemuDomainAddIOThread and qemuDomainDelIOThread in order to add or
remove an IOThread to/from the host either for live or config optoins
The implementation for the 'live' option will use the iothreadpids list
in order to make decision, while the 'config' option will use the
iothreadids list. Additionally, for deletion each may have to adjust
the iothreadpin list.
IOThreads are implemented by qmp objects, the code makes use of the existing
qemuMonitorAddObject or qemuMonitorDelObject APIs.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Remove the iothreadspin array from cputune and replace with a cpumask
to be stored in the iothreadids list.
Adjust the test output because our printing goes in order of the iothreadids
list now.
Add 'thread_id' to the virDomainIOThreadIDDef as a means to store the
'thread_id' as returned from the live qemu monitor data.
Remove the iothreadpids list from _qemuDomainObjPrivate and replace with
the new iothreadids 'thread_id' element.
Rather than use the default numbering scheme of 1..number of iothreads
defined for the domain, use the iothreadid's list for the iothread_id
Since iothreadids list keeps track of the iothread_id's, these are
now used in place of the many places where a for loop would "know"
that the ID was "+ 1" from the array element.
The new tests ensure usage of the <iothreadid> values for an exact number
of iothreads and the usage of a smaller number of <iothreadid> values than
iothreads that exist (and usage of the default numbering scheme).
