"Instead of developing one CPU with 12 cores, the Magny Cours is
actually two 6 core “Bulldozer” CPUs combined in to one package"
I.e, each package has two NUMA nodes, and the two numa nodes share
the same core ID set (0-6), which means parsing the cores number
from sysfs doesn't work in this case.
And the wrong CPU number could cause three problems for libvirt:
1) performance lost
A domain without "cpuset" or "placement='auto'" (to drive numad)
specified will be only pinned to part of the CPUs.
2) domain can be started
If a domain uses numad, and the advisory nodeset returned from
numad contains node which exceeds the range of wrong total CPU
number. The domain will fail to start, as the bitmask passed to
sched_setaffinity could be fully filled with zero.
3) wrong CPU number affects lots of stuffs.
E.g. for command "virsh vcpuinfo", "virsh vcpupin", it will always
output with the truncated CPU list.
For more details:
https://www.redhat.com/archives/libvir-list/2012-May/msg00607.html
This patch is to fix the problem by parsing /proc/cpuinfo to get
the value of field "cpu cores", and use it as nodeinfo->cores if
it's greater than the cores number from sysfs.
Like for 'static' placement, when the memory policy mode is
'strict', set the memory policy by writing the advisory nodeset
returned from numad to cgroup file cpuset.mems,
On some of the NUMA platforms, the CPU index in each NUMA node
grows non-consecutive. While on other platforms, it can be inconsecutive,
E.g.
% numactl --hardware
available: 4 nodes (0-3)
node 0 cpus: 0 4 8 12 16 20 24 28
node 0 size: 131058 MB
node 0 free: 86531 MB
node 1 cpus: 1 5 9 13 17 21 25 29
node 1 size: 131072 MB
node 1 free: 127070 MB
node 2 cpus: 2 6 10 14 18 22 26 30
node 2 size: 131072 MB
node 2 free: 127758 MB
node 3 cpus: 3 7 11 15 19 23 27 31
node 3 size: 131072 MB
node 3 free: 127226 MB
node distances:
node 0 1 2 3
0: 10 20 20 20
1: 20 10 20 20
2: 20 20 10 20
3: 20 20 20 10
This patch is to fix the problem by using the CPU index in
caps->host.numaCell[i]->cpus[i] to set the bitmask instead of
assuming the CPU index of the NUMA nodes are always sequential.
For pseries guest, the default controller model is
ibmvscsi controller, this controller only can work
on spapr-vio address.
This patch is to assign spapr-vio address type to
ibmvscsi controller and correct vscsi test case.
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
We had previously weakened our nodeinfotest in order to ignore parsed
node values, because the parse function was mistakenly relying on
host files. A better fix is to avoid using the numactl library, but
to instead parse the same files that numactl would read, all while
allowing the files to be relative to our choice of directory.
* src/nodeinfo.c (CPU_SYS_PATH, NODE_SYS_PATH): Replace with...
(SYSFS_SYSTEM_PATH): ...parent directory.
(linuxNodeInfoCPUPopulate): Check NUMA nodes from requested
directory (by inlining numactl code).
(nodeGetCPUmap, nodeGetMemoryStats): Adjust macro use.
* tests/nodeinfotest.c (linuxTestCompareFiles, linuxTestNodeInfo):
Update test to match.
We were wasting time to malloc a copy of a constant string, then
copy it into static storage, for every call to nodeGetInfo. At
least we were lucky that it was a constant source, and thus not
subject to even worse issues with one thread clobbering the static
storage while another was using it. This gets rid of the waste,
by passing the string through the stack instead, as well as renaming
internal functions to better match our conventions.
* src/nodeinfo.c (sysfs_path): Delete.
(get_cpu_value, count_thread_siblings, parse_socket): Add
parameter, and rename...
(virNodeGetCpuValue, virNodeCountThreadSiblings)
(virNodeParseSocket): ... into a common namespace.
(cpu_online, parse_core): Inline into callers.
(linuxNodeInfoCPUPopulate): Update caller.
(nodeGetInfo): Drop a useless malloc.
Commit cdce2f42d tried to silence a compiler warning on 32-bit builds,
but the gcc shipped with RHEL 5 is old enough that the type conversion
via multiplication by 1 was insufficient for the task.
* src/qemu/qemu_monitor.c (qemuMonitorBlockJob): Previous attempt
didn't get past all gcc versions.
As defined in:
http://standards.freedesktop.org/basedir-spec/basedir-spec-latest.html
This offers a number of advantages:
* Allows sharing a home directory between different machines, or
sessions (eg. using NFS)
* Cleanly separates cache, runtime (eg. sockets), or app data from
user settings
* Supports performing smart or selective migration of settings
between different OS versions
* Supports reseting settings without breaking things
* Makes it possible to clear cache data to make room when the disk
is filling up
* Allows us to write a robust and efficient backup solution
* Allows an admin flexibility to change where data and settings are stored
* Dramatically reduces the complexity and incoherence of the
system for administrators
Appending an item to a list transfers ownership of that item to the
list owner. But an error can occur in between item allocation and
appending it to the list. In this case the item has to be freed
explicitly. This was not done in some special cases resulting in
possible memory leaks.
Reported by Coverity.
This patch lifts the limit of calling thread detection code only on KVM
guests. With upstream qemu the thread mappings are reported also on
non-KVM machines.
QEMU adopted the thread_id information from the kvm branch.
To remain compatible with older upstream versions of qemu the check is
attempted but the failure to detect threads (or even run the monitor
command - on older versions without SMP support) is treated non-fatal
and the code reports one vCPU with pid of the hypervisor (in same
fashion this was done on non-KVM guests).
After a cpu hotplug the qemu driver did not refresh information about
virtual processors used by qemu and their corresponding threads. This
patch forces a re-detection as is done on start of QEMU.
This ensures that correct information is reported by the
virDomainGetVcpus API and "virsh vcpuinfo".
A failure to obtain the thread<->vcpu mapping is treated non-fatal and
the mapping is not updated in a case of failure as not all versions of
QEMU report this in the info cpus command.
This patch changes a switch statement into ifs when handling live vs.
configuration modifications getting rid of redundant code in case when
both live and persistent configuration gets changed.
when failing to attach another usb device to a domain for some reason
which has one use device attached before, the libvirtd crashed.
The crash is caused by null-pointer dereference error in invoking
usbDeviceListSteal passed in NULL value usb variable.
commit 05abd1507d introduces the bug.
Detected by valgrind. Leaks are introduced in commit 122fa379.
src/conf/storage_conf.c: fix memory leaks.
How to reproduce?
$ make && make -C tests check TESTS=storagepoolxml2xmltest
$ cd tests && valgrind -v --leak-check=full ./storagepoolxml2xmltest
actual result:
==28571== LEAK SUMMARY:
==28571== definitely lost: 40 bytes in 5 blocks
==28571== indirectly lost: 0 bytes in 0 blocks
==28571== possibly lost: 0 bytes in 0 blocks
==28571== still reachable: 1,054 bytes in 21 blocks
==28571== suppressed: 0 bytes in 0 blocks
Signed-off-by: Alex Jia <ajia@redhat.com>
No useful error was being reported when an invalid character device
target type is specified in the domainXML. E.g.
...
<console type="pty">
<source path="/dev/pts/2"/>
<target type="kvm" port="0"/>
</console>
...
resulted in
error: Failed to define domain from x.xml
error: An error occurred, but the cause is unknown
With this small patch, the error is more helpful
error: Failed to define domain from x.xml
error: XML error: unknown target type 'kvm' specified for character device
<vcpu> is not an optional node. The value for its 'placement'
actually always defaults to 'static' in the underlying codes.
(Even no 'cpuset' and 'placement' is specified, the domain
process will be pinned to all the available pCPUs).
Though numad will manage the memory allocation of task dynamically,
it wants management application (libvirt) to pre-set the memory
policy according to the advisory nodeset returned from querying numad,
(just like pre-bind CPU nodeset for domain process), and thus the
performance could benefit much more from it.
This patch introduces new XML tag 'placement', value 'auto' indicates
whether to set the memory policy with the advisory nodeset from numad,
and its value defaults to the value of <vcpu> placement, or 'static'
if 'nodeset' is specified. Example of the new XML tag's usage:
<numatune>
<memory placement='auto' mode='interleave'/>
</numatune>
Just like what current "numatune" does, the 'auto' numa memory policy
setting uses libnuma's API too.
If <vcpu> "placement" is "auto", and <numatune> is not specified
explicitly, a default <numatume> will be added with "placement"
set as "auto", and "mode" set as "strict".
The following XML can now fully drive numad:
1) <vcpu> placement is 'auto', no <numatune> is specified.
<vcpu placement='auto'>10</vcpu>
2) <vcpu> placement is 'auto', no 'placement' is specified for
<numatune>.
<vcpu placement='auto'>10</vcpu>
<numatune>
<memory mode='interleave'/>
</numatune>
And it's also able to control the CPU placement and memory policy
independently. e.g.
1) <vcpu> placement is 'auto', and <numatune> placement is 'static'
<vcpu placement='auto'>10</vcpu>
<numatune>
<memory mode='strict' nodeset='0-10,^7'/>
</numatune>
2) <vcpu> placement is 'static', and <numatune> placement is 'auto'
<vcpu placement='static' cpuset='0-24,^12'>10</vcpu>
<numatune>
<memory mode='interleave' placement='auto'/>
</numatume>
A follow up patch will change the XML formatting codes to always output
'placement' for <vcpu>, even it's 'static'.
It turns out that when cgroups are enabled, the use of a block device
for a snapshot target was failing with EPERM due to libvirt failing
to add the block device to the cgroup whitelist. See also
https://bugzilla.redhat.com/show_bug.cgi?id=810200
* src/qemu/qemu_driver.c
(qemuDomainSnapshotCreateSingleDiskActive)
(qemuDomainSnapshotUndoSingleDiskActive): Account for cgroup.
(qemuDomainSnapshotCreateDiskActive): Update caller.
qemu's behavior in this case is to change the spice server behavior to
require secure connection to any channel not otherwise specified as
being in plaintext mode. libvirt doesn't currently allow requesting this
(via plaintext-channel=<channel name>).
RHBZ: 819499
Signed-off-by: Alon Levy <alevy@redhat.com>
Until now, the nl_pid of the source address of every message sent by
virNetlinkCommand has been set to the value of getpid(). Most of the
time this doesn't matter, and in the one case where it does
(communication with lldpad), it previously was the proper thing to do,
because the netlink event service (which listens on a netlink socket
for unsolicited messages from lldpad) coincidentally always happened
to bind with a local nl_pid == getpid().
With the fix for:
https://bugzilla.redhat.com/show_bug.cgi?id=816465
that particular nl_pid is now effectively a reserved value, so the
netlink event service will always bind to something else
(coincidentally "getpid() + (1 << 22)", but it really could be
anything). The result is that communication between lldpad and
libvirtd is broken (lldpad gets a "disconnected" error when it tries
to send a directed message).
The solution to this problem caused by a solution, is to query the
netlink event service's nlhandle for its "local_port", and send that
as the source nl_pid (but only when sending to lldpad, of course - in
other cases we maintain the old behavior of sending getpid()).
There are two cases where a message is being directed at lldpad - one
in virNetDevLinkDump, and one in virNetDevVPortProfileOpSetLink.
The case of virNetDevVPortProfileOpSetLink is simplest to explain -
only if !nltarget_kernel, i.e. the message isn't targetted for the
kernel, is the dst_pid set (by calling
virNetDevVPortProfileGetLldpadPid()), so only in that case do we call
virNetlinkEventServiceLocalPid() to set src_pid.
For virNetDevLinkDump, it's a bit more complicated. The call to
virNetDevVPortProfileGetLldpadPid() was effectively up one level (in
virNetDevVPortProfileOpCommon), although obscured by an unnecessary
passing of a function pointer. This patch removes the function
pointer, and calls virNetDevVPortProfileGetLldpadPid() directly in
virNetDevVPortProfileOpCommon - if it's doing this, it knows that it
should also call virNetlinkEventServiceLocalPid() to set src_pid too;
then it just passes src_pid and dst_pid down to
virNetDevLinkDump. Since (src_pid == 0 && dst_pid == 0) implies that
the kernel is the destination, there is no longer any need to send
nltarget_kernel as an arg to virNetDevLinkDump, so it's been removed.
The disparity between src_pid being int and dst_pid being uint32_t may
be a bit disconcerting to some, but I didn't want to complicate
virNetlinkEventServiceLocalPid() by having status returned separately
from the value.
This value will be needed to set the src_pid when sending netlink
messages to lldpad. It is part of the solution to:
https://bugzilla.redhat.com/show_bug.cgi?id=816465
Note that libnl's port generation algorithm guarantees that the
nl_socket_get_local_port() will always be > 0 (since it is "getpid() +
(n << 22>" where n is always < 1024), so it is okay to cast the
uint32_t to int (thus allowing us to use -1 as an error sentinel).
Until now, virNetlinkCommand has assumed that the nl_pid in the source
address of outgoing netlink messages should always be the return value
of getpid(). In most cases it actually doesn't matter, but in the case
of communication with lldpad, lldpad saves this info and later uses it
to send netlink messages back to libvirt. A recent patch to fix Bug
816465 changed the order of the universe such that the netlink event
service socket is no longer bound with nl_pid == getpid(), so lldpad
could no longer send unsolicited messages to libvirtd. Adding src_pid
as an argument to virNetlinkCommand() is the first step in notifying
lldpad of the proper address of the netlink event service socket.
src/qemu/qemu_hostdev.c:
refactor qemuPrepareHostdevUSBDevices function, make it focus on
adding usb device to activeUsbHostdevs after check. After that,
the usb hotplug function qemuDomainAttachHostDevice also could use
it.
expand qemuPrepareHostUSBDevices to perform the usb search,
rollback on failure.
src/qemu/qemu_hotplug.c:
If there are multiple usb devices available with same vendorID and productID,
but with different value of "bus, device", we give an error to let user
use <address> to specify the desired one.
usbFindDevice():get usb device according to
idVendor, idProduct, bus, device
it is the exact match of the four parameters
usbFindDeviceByBus():get usb device according to bus, device
it returns only one usb device same as usbFindDevice
usbFindDeviceByVendor():get usb device according to idVendor,idProduct
it probably returns multiple usb devices.
usbDeviceSearch(): a helper function to do the actual search
When we added the default USB controller into domain XML, we efficiently
broke migration to older versions of libvirt that didn't support USB
controllers at all (0.9.4 and earlier) even for domains that don't use
anything that the older libvirt can't provide. We still want to present
the default USB controller in any XML seen by a user/app but we can
safely remove it from the domain XML used during migration. If we are
migrating to a new enough libvirt, it will add the controller XML back,
while older libvirt won't be confused with it although it will still
tell qemu to create the controller.
Similar approach can be used in the future whenever we find out we
always enabled some kind of device without properly advertising it in
domain XML.
Commit 4c82f09e added a capability check for qemu per-device io
throttling, but only applied it to domain startup. As mentioned
in the previous commit (98cec05), the user can still get an 'internal
error' message during a hotplug attempt, when the monitor command
doesn't exist. It is confusing to allow tuning on inactive domains
only to then be rejected when starting the domain.
* src/qemu/qemu_driver.c (qemuDomainSetBlockIoTune): Reject
offline tuning if online can't match it.
If you have a qemu build that lacks the blockio tune monitor command,
then this command:
$ virsh blkdeviotune rhel6u2 hda --total_bytes_sec 1000
error: Unable to change block I/O throttle
error: internal error Unexpected error
fails as expected (well, the error message is lousy), but the next
dumpxml shows that the domain was modified anyway. Worse, that means
if you save the domain then restore it, the restore will likely fail
due to throttling being unsupported, even though no throttling should
even be active because the monitor command failed in the first place.
* src/qemu/qemu_driver.c (qemuDomainSetBlockIoTune): Check for
error before making modification permanent.
These two functions are called from main() on all platforms, and
always return success on platforms that don't support libnl. They
still log an error message, though, which doesn't make sense - they
should just be NOPs on those platforms. (Per a suggestion during
review, I've turned the logs into debug messages rather than removing
them completely).
Error: STRING_NULL:
/libvirt/src/node_device/node_device_linux_sysfs.c:80:
string_null_argument: Function "saferead" does not terminate string "*buf".
/libvirt/src/util/util.c:101:
string_null_argument: Function "read" fills array "*buf" with a non-terminated string.
/libvirt/src/node_device/node_device_linux_sysfs.c:87:
string_null: Passing unterminated string "buf" to a function expecting a null-terminated string.
Error: STRING_NULL:
/libvirt/src/util/uuid.c:273:
string_null_argument: Function "getDMISystemUUID" does not terminate string "*dmiuuid".
/libvirt/src/util/uuid.c:241:
string_null_argument: Function "saferead" fills array "*uuid" with a non-terminated string.
/libvirt/src/util/util.c:101:
string_null_argument: Function "read" fills array "*buf" with a non-terminated string.
/libvirt/src/util/uuid.c:274:
string_null: Passing unterminated string "dmiuuid" to a function expecting a null-terminated string.
/libvirt/src/util/uuid.c:138:
var_assign_parm: Assigning: "cur" = "uuidstr". They now point to the same thing.
/libvirt/src/util/uuid.c:164:
string_null_sink_loop: Searching for null termination in an unterminated array "cur".
Error: RESOURCE_LEAK:
/libvirt/src/qemu/qemu_driver.c:6968:
alloc_fn: Calling allocation function "calloc".
/libvirt/src/qemu/qemu_driver.c:6968:
var_assign: Assigning: "nodeset" = storage returned from "calloc(1UL, 1UL)".
/libvirt/src/qemu/qemu_driver.c:6977:
noescape: Variable "nodeset" is not freed or pointed-to in function "virTypedParameterAssign".
/libvirt/src/qemu/qemu_driver.c:6997:
leaked_storage: Variable "nodeset" going out of scope leaks the storage it points to.
Error: RESOURCE_LEAK:
/libvirt/src/vmx/vmx.c:2431:
alloc_fn: Calling allocation function "calloc".
/libvirt/src/vmx/vmx.c:2431:
var_assign: Assigning: "networkName" = storage returned from "calloc(1UL, 1UL)".
/libvirt/src/vmx/vmx.c:2495:
leaked_storage: Variable "networkName" going out of scope leaks the storage it points to.
Error: RESOURCE_LEAK:
/builddir/build/BUILD/libvirt-0.9.10/src/nodeinfo.c:629: alloc_fn: Calling allocation function "fopen".
/builddir/build/BUILD/libvirt-0.9.10/src/nodeinfo.c:629: var_assign: Assigning: "cpuinfo" = storage returned from "fopen("/proc/cpuinfo", "r")".
/builddir/build/BUILD/libvirt-0.9.10/src/nodeinfo.c:638: leaked_storage: Variable "cpuinfo" going out of scope leaks the storage it points to.
Error: RESOURCE_LEAK:
/builddir/build/BUILD/libvirt-0.9.10/src/test/test_driver.c:1041: alloc_arg: Calling allocation function "virXPathNodeSet" on "devs".
/builddir/build/BUILD/libvirt-0.9.10/src/util/xml.c:621: alloc_arg: "virAllocN" allocates memory that is stored into "*list".
/builddir/build/BUILD/libvirt-0.9.10/src/util/memory.c:129: alloc_fn: Storage is returned from allocation function "calloc".
/builddir/build/BUILD/libvirt-0.9.10/src/util/memory.c:129: var_assign: Assigning: "*((void **)ptrptr)" = "calloc(count, size)".
/builddir/build/BUILD/libvirt-0.9.10/src/util/xml.c:625: noescape: Variable "*list" is not freed or pointed-to in function "memcpy".
/builddir/build/BUILD/libvirt-0.9.10/src/test/test_driver.c:1098: leaked_storage: Variable "devs" going out of scope leaks the storage it points to.
Coverity logs:
Error: RESOURCE_LEAK:
/builddir/build/BUILD/libvirt-0.9.10/src/xen/xen_inotify.c:103: alloc_fn: Calling allocation function "xenDaemonLookupByUUID".
/builddir/build/BUILD/libvirt-0.9.10/src/xen/xend_internal.c:2534: alloc_fn: Storage is returned from allocation function "virGetDomain".
/builddir/build/BUILD/libvirt-0.9.10/src/datatypes.c:191: alloc_arg: "virAlloc" allocates memory that is stored into "ret".
/builddir/build/BUILD/libvirt-0.9.10/src/util/memory.c:101: alloc_fn: Storage is returned from allocation function "calloc".
/builddir/build/BUILD/libvirt-0.9.10/src/util/memory.c:101: var_assign: Assigning: "*((void **)ptrptr)" = "calloc(1UL, size)".
/builddir/build/BUILD/libvirt-0.9.10/src/datatypes.c:210: return_alloc: Returning allocated memory "ret".
/builddir/build/BUILD/libvirt-0.9.10/src/xen/xend_internal.c:2534: var_assign: Assigning: "ret" = "virGetDomain(conn, name, uuid)".
/builddir/build/BUILD/libvirt-0.9.10/src/xen/xend_internal.c:2541: return_alloc: Returning allocated memory "ret".
/builddir/build/BUILD/libvirt-0.9.10/src/xen/xen_inotify.c:103: var_assign: Assigning: "dom" = storage returned from "xenDaemonLookupByUUID(conn, rawuuid)".
/builddir/build/BUILD/libvirt-0.9.10/src/xen/xen_inotify.c:126: leaked_storage: Variable "dom" going out of scope leaks the storage it points to.
Error: RESOURCE_LEAK:
/builddir/build/BUILD/libvirt-0.9.10/src/xen/xen_hypervisor.c:2742: alloc_fn: Calling allocation function "fopen".
/builddir/build/BUILD/libvirt-0.9.10/src/xen/xen_hypervisor.c:2742: var_assign: Assigning: "cpuinfo" = storage returned from "fopen("/proc/cpuinfo", "r")".
/builddir/build/BUILD/libvirt-0.9.10/src/xen/xen_hypervisor.c:2763: noescape: Variable "cpuinfo" is not freed or pointed-to in function "xenHypervisorMakeCapabilitiesInternal".
/builddir/build/BUILD/libvirt-0.9.10/src/xen/xen_hypervisor.c:2574:45: noescape: "xenHypervisorMakeCapabilitiesInternal" does not free or save its pointer parameter "cpuinfo".
/builddir/build/BUILD/libvirt-0.9.10/src/xen/xen_hypervisor.c:2768: leaked_storage: Variable "cpuinfo" going out of scope leaks the storage it points to.
Error: RESOURCE_LEAK:
/builddir/build/BUILD/libvirt-0.9.10/src/xen/xen_hypervisor.c:2752: alloc_fn: Calling allocation function "fopen".
/builddir/build/BUILD/libvirt-0.9.10/src/xen/xen_hypervisor.c:2752: var_assign: Assigning: "capabilities" = storage returned from "fopen("/sys/hypervisor/properties/capabilities", "r")".
/builddir/build/BUILD/libvirt-0.9.10/src/xen/xen_hypervisor.c:2763: noescape: Variable "capabilities" is not freed or pointed-to in function "xenHypervisorMakeCapabilitiesInternal".
/builddir/build/BUILD/libvirt-0.9.10/src/xen/xen_hypervisor.c:2574:60: noescape: "xenHypervisorMakeCapabilitiesInternal" does not free or save its pointer parameter "capabilities".
/builddir/build/BUILD/libvirt-0.9.10/src/xen/xen_hypervisor.c:2768: leaked_storage: Variable "capabilities" going out of scope leaks the storage it points to.
Coverity logs:
Error: RESOURCE_LEAK:
/builddir/build/BUILD/libvirt-0.9.10/src/phyp/phyp_driver.c:523: alloc_fn: Calling allocation function "fopen".
/builddir/build/BUILD/libvirt-0.9.10/src/phyp/phyp_driver.c:523: var_assign: Assigning: "fd" = storage returned from "fopen(local_file, "rb")".
/builddir/build/BUILD/libvirt-0.9.10/src/phyp/phyp_driver.c:540: noescape: Variable "fd" is not freed or pointed-to in function "fread".
/builddir/build/BUILD/libvirt-0.9.10/src/phyp/phyp_driver.c:542: noescape: Variable "fd" is not freed or pointed-to in function "feof".
/builddir/build/BUILD/libvirt-0.9.10/src/phyp/phyp_driver.c:575: leaked_storage: Variable "fd" going out of scope leaks the storage it points to.
/builddir/build/BUILD/libvirt-0.9.10/src/phyp/phyp_driver.c:585: leaked_storage: Variable "fd" going out of scope leaks the storage it points to.
Error: RESOURCE_LEAK:
/builddir/build/BUILD/libvirt-0.9.10/src/phyp/phyp_driver.c:2088: alloc_fn: Calling allocation function "phypVolumeLookupByName".
/builddir/build/BUILD/libvirt-0.9.10/src/phyp/phyp_driver.c:2026: alloc_fn: Storage is returned from allocation function "virGetStorageVol".
/builddir/build/BUILD/libvirt-0.9.10/src/datatypes.c:724: alloc_arg: "virAlloc" allocates memory that is stored into "ret".
/builddir/build/BUILD/libvirt-0.9.10/src/util/memory.c:101: alloc_fn: Storage is returned from allocation function "calloc".
/builddir/build/BUILD/libvirt-0.9.10/src/util/memory.c:101: var_assign: Assigning: "*((void **)ptrptr)" = "calloc(1UL, size)".
/builddir/build/BUILD/libvirt-0.9.10/src/datatypes.c:753: return_alloc: Returning allocated memory "ret".
/builddir/build/BUILD/libvirt-0.9.10/src/phyp/phyp_driver.c:2026: var_assign: Assigning: "vol" = "virGetStorageVol(pool->conn, pool->name, volname, key)".
/builddir/build/BUILD/libvirt-0.9.10/src/phyp/phyp_driver.c:2030: return_alloc: Returning allocated memory "vol".
/builddir/build/BUILD/libvirt-0.9.10/src/phyp/phyp_driver.c:2088: leaked_storage: Failing to save storage allocated by "phypVolumeLookupByName(pool, voldef->name)" leaks it.
Error: RESOURCE_LEAK:
/builddir/build/BUILD/libvirt-0.9.10/src/phyp/phyp_driver.c:2725: alloc_fn: Calling allocation function "phypGetStoragePoolLookUpByUUID".
/builddir/build/BUILD/libvirt-0.9.10/src/phyp/phyp_driver.c:2689: alloc_fn: Storage is returned from allocation function "virGetStoragePool".
/builddir/build/BUILD/libvirt-0.9.10/src/datatypes.c:592: alloc_arg: "virAlloc" allocates memory that is stored into "ret".
/builddir/build/BUILD/libvirt-0.9.10/src/util/memory.c:101: alloc_fn: Storage is returned from allocation function "calloc".
/builddir/build/BUILD/libvirt-0.9.10/src/util/memory.c:101: var_assign: Assigning: "*((void **)ptrptr)" = "calloc(1UL, size)".
/builddir/build/BUILD/libvirt-0.9.10/src/datatypes.c:610: return_alloc: Returning allocated memory "ret".
/builddir/build/BUILD/libvirt-0.9.10/src/phyp/phyp_driver.c:2689: var_assign: Assigning: "sp" = "virGetStoragePool(conn, pools[i], uuid)".
/builddir/build/BUILD/libvirt-0.9.10/src/phyp/phyp_driver.c:2694: return_alloc: Returning allocated memory "sp".
/builddir/build/BUILD/libvirt-0.9.10/src/phyp/phyp_driver.c:2725: leaked_storage: Failing to save storage allocated by "phypGetStoragePoolLookUpByUUID(conn, def->uuid)" leaks it.
Error: RESOURCE_LEAK:
/builddir/build/BUILD/libvirt-0.9.10/src/phyp/phyp_driver.c:2719: alloc_fn: Calling allocation function "phypStoragePoolLookupByName".
/builddir/build/BUILD/libvirt-0.9.10/src/phyp/phyp_driver.c:2254: alloc_fn: Storage is returned from allocation function "virGetStoragePool".
/builddir/build/BUILD/libvirt-0.9.10/src/datatypes.c:592: alloc_arg: "virAlloc" allocates memory that is stored into "ret".
/builddir/build/BUILD/libvirt-0.9.10/src/util/memory.c:101: alloc_fn: Storage is returned from allocation function "calloc".
/builddir/build/BUILD/libvirt-0.9.10/src/util/memory.c:101: var_assign: Assigning: "*((void **)ptrptr)" = "calloc(1UL, size)".
/builddir/build/BUILD/libvirt-0.9.10/src/datatypes.c:610: return_alloc: Returning allocated memory "ret".
/builddir/build/BUILD/libvirt-0.9.10/src/phyp/phyp_driver.c:2254: return_alloc_fn: Directly returning storage allocated by "virGetStoragePool".
/builddir/build/BUILD/libvirt-0.9.10/src/phyp/phyp_driver.c:2719: leaked_storage: Failing to save storage allocated by "phypStoragePoolLookupByName(conn, def->name)" leaks it.
Error: RESOURCE_LEAK:
/builddir/build/BUILD/libvirt-0.9.10/src/phyp/phyp_driver.c:2270: alloc_fn: Calling allocation function "phypStoragePoolLookupByName".
/builddir/build/BUILD/libvirt-0.9.10/src/phyp/phyp_driver.c:2254: alloc_fn: Storage is returned from allocation function "virGetStoragePool".
/builddir/build/BUILD/libvirt-0.9.10/src/datatypes.c:592: alloc_arg: "virAlloc" allocates memory that is stored into "ret".
/builddir/build/BUILD/libvirt-0.9.10/src/util/memory.c:101: alloc_fn: Storage is returned from allocation function "calloc".
/builddir/build/BUILD/libvirt-0.9.10/src/util/memory.c:101: var_assign: Assigning: "*((void **)ptrptr)" = "calloc(1UL, size)".
/builddir/build/BUILD/libvirt-0.9.10/src/datatypes.c:610: return_alloc: Returning allocated memory "ret".
/builddir/build/BUILD/libvirt-0.9.10/src/phyp/phyp_driver.c:2254: return_alloc_fn: Directly returning storage allocated by "virGetStoragePool".
/builddir/build/BUILD/libvirt-0.9.10/src/phyp/phyp_driver.c:2270: var_assign: Assigning: "sp" = storage returned from "phypStoragePoolLookupByName(vol->conn, vol->pool)".
/builddir/build/BUILD/libvirt-0.9.10/src/phyp/phyp_driver.c:2324: leaked_storage: Variable "sp" going out of scope leaks the storage it points to.
/builddir/build/BUILD/libvirt-0.9.10/src/phyp/phyp_driver.c:2327: leaked_storage: Variable "sp" going out of scope leaks the storage it points t
On 32-bit platforms, gcc warns that the comparison between a long
and (ULLONG_MAX/1024/1024) is always false; throwing in a type
conversion shuts up the warning.
* src/qemu/qemu_monitor.c (qemuMonitorBlockJob): Shut gcc up.
configure.ac: check for libnl-3 in addition to libnl-1
src/Makefile.am: link against libnl when needed
src/util/virnetlink.c:
support libnl3 api. To minimize impact on code flow, wrap the
differences under the virNetlink* namespace.
Unfortunately libnl3 moves netlink/msg.h to
/usr/include/libnl3/netlink/msg.h, so the LIBNL_CFLAGS need to be added
to a bunch of places where they weren't needed with libnl1.
Signed-off-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Add function virJSONValueObjectKeysNumber, virJSONValueObjectGetKey
and virJSONValueObjectGetValue, which allow you to iterate over all
fields of json object: you can get number of fields and then get
name and value, stored in field with that name by index.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
The ATTRIBUTE_NONNULL(m) macro normally resolves to the gcc builtin
__attribute__((__nonnull__(m))). The effect of this in gcc is
unfortunately only to make gcc believe that "m" can never possibly be
NULL, *not* to add in any checks to guarantee that it isn't ever NULL
(i.e. it is an optimization aid, *not* something to verify code
correctness.) - see the following gcc bug report for more details:
http://gcc.gnu.org/bugzilla/show_bug.cgi?id=17308
Static source analyzers such as clang and coverity apparently can use
ATTRIBUTE_NONNULL(), though, to detect dead code (in the case that the
arg really is guaranteed non-NULL), as well as situations where an
obviously NULL arg is given to the function.
https://bugzilla.redhat.com/show_bug.cgi?id=815270 is a good example
of a bug caused by erroneous application of ATTRIBUTE_NONNULL().
Several people spent a long time staring at this code and not finding
the problem, because the problem wasn't in the function itself, but in
the prototype that specified ATTRIBUTE_NONNULL() for an arg that
actually *wasn't* always non-NULL, and caused a segv when dereferenced
(even though the code that dereferenced the pointer was inside an if()
that checked for a NULL pointer, that code was optimized out by gcc).
There may be some very small gain to be had from the optimizations
that can be inferred from ATTRIBUTE_NONNULL(), but it seems safer to
err on the side of generating code that behaves as expected, while
turning on the attribute for static analyzers.
Once lxcContainerSetStdio is invoked, logging will not work as
expected in libvirt_lxc. So make sure this is the last thing to
be called, in particular after setting the security process label
The virLogSetFromEnv call was done too late in startup to
catch many log messages (eg from security driver initialization).
To assist debugging also explicitly log the security details
at startup
The driver->securityDriverName field may be NULL, if automatic
probing is used to determine security driver. This meant that
unless selinux was explicitly requested in lxc.conf, it was
not being sent to the libvirt_lxc process.
The driver->securityManager field is guaranteed non-NULL, since
there will always be the 'none' security driver present if
nothing else exists. So use that to set the driver name for
libvirt_lxc
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently the libvirt_lxc process uses VIR_DOMAIN_XML_INACTIVE
when loading the XML for the container. This means it loses
any dynamic data such as the, just allocated, SELinux label.
Further there is an inconsistency in the libvirt LXC driver
whereby it saves the live config XML and then later overwrites
the file with the live status XML instead. Add a comment about
this for future reference.
* src/lxc/lxc_controller.c: Remove VIR_DOMAIN_XML_INACTIVE
when loading XML
* src/lxc/lxc_driver.c: Add comment about inconsistent
config file formats
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This works with newer qemu that doesn't allow escaping spaces.
It's backwards compatible as well.
Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com>
In fact, the 'tapfd' is always NULL, the function 'virNetDevTapCreate()' hasn't
assign 'fd' to 'tapfd', when the function 'virNetDevSetMAC()' is failed then
goto 'error' label, finally, the VIR_FORCE_CLOSE() will deref a NULL 'tapfd'.
* util/virnetdevtap.c (virNetDevTapCreateInBridgePort): fix a NULL pointer derefing.
* How to reproduce?
$ cat > /tmp/net.xml <<EOF
<network>
<name>test</name>
<forward mode='nat'/>
<bridge name='br1' stp='off' delay='1' />
<mac address='00:00:00:00:00:00'/>
<ip address='192.168.100.1' netmask='255.255.255.0'>
<dhcp>
<range start='192.168.100.2' end='192.168.100.254' />
</dhcp>
</ip>
</network>
EOF
$ virsh net-define /tmp/net.xml
$ virsh net-start test
error: Failed to start network brTest
error: End of file while reading data: Input/output error
Signed-off-by: Alex Jia <ajia@redhat.com>
The previous storage patch missed an instance affected by the struct
member rename. It also had some botched whitespace detected by
'make check'.
* src/storage/storage_backend_iscsi.c
(virStorageBackendISCSIFindPoolSources): Adjust to new struct.
* src/conf/storage_conf.c (virStoragePoolSourceFormat): Fix
indentation.
It doesn't break out the "for" loop even if duplicate pool is
found, and thus the "matchpool" could be overriden as NULL again
if there is different pool afterwards.
To address the problem in libvirt-user list:
https://www.redhat.com/archives/libvirt-users/2012-April/msg00150.html
The current storage pools for NFS and iSCSI only require one host to
connect to. Future storage pools like RBD and Sheepdog will require
multiple hosts.
This patch allows multiple source hosts and rewrites the current
storage drivers.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
When libvirtd is started, we create "libvirt/qemu" directories under
hugetlbfs mount point. Only the "qemu" subdirectory is chowned to qemu
user and "libvirt" remains owned by root. If umask was too restrictive
when libvirtd started, qemu user may lose access to "qemu"
subdirectory. Let's explicitly grant search permissions to "libvirt"
directory for all users.
Currently, qemu GA is not providing 'desc' field for errors like
we are used to from qemu monitor. Therefore, we fall back to this
general 'unknown error' string. However, GA is reporting 'class' which
is not perfect, but much more helpful than generic error string.
Thus we should fall back to class firstly and if even no class
is presented, then we can fall back to that generic string.
Before this patch:
virsh # dompmsuspend --target mem f16
error: Domain f16 could not be suspended
error: internal error unable to execute QEMU command
'guest-suspend-ram': unknown QEMU command error
After this patch:
virsh # dompmsuspend --target mem f16
error: Domain f16 could not be suspended
error: internal error unable to execute QEMU command
'guest-suspend-ram': The command has not been found
More bug extermination in the category of:
Error: CHECKED_RETURN:
/libvirt/src/conf/network_conf.c:595:
check_return: Calling function "virAsprintf" without checking return value (as is done elsewhere 515 out of 543 times).
/libvirt/src/qemu/qemu_process.c:2780:
unchecked_value: No check of the return value of "virAsprintf(&msg, "was paused (%s)", virDomainPausedReasonTypeToString(reason))".
/libvirt/tests/commandtest.c:809:
check_return: Calling function "setsid" without checking return value (as is done elsewhere 4 out of 5 times).
/libvirt/tests/commandtest.c:830:
unchecked_value: No check of the return value of "virTestGetDebug()".
/libvirt/tests/commandtest.c:831:
check_return: Calling function "virTestGetVerbose" without checking return value (as is done elsewhere 41 out of 42 times).
/libvirt/tests/commandtest.c:833:
check_return: Calling function "virInitialize" without checking return value (as is done elsewhere 18 out of 21 times).
One note about the error in commandtest line 809: setsid() seems to fail when running the test -- could be removed ?
With RHEL 6.2, virDomainBlockPull(dom, dev, bandwidth, 0) has a race
with non-zero bandwidth: there is a window between the block_stream
and block_job_set_speed monitor commands where an unlimited amount
of data was let through, defeating the point of a throttle.
This race was first identified in commit a9d3495e, and libvirt was
able to reduce the size of the window for that race. In the meantime,
the qemu developers decided to fix things properly; per this message:
https://lists.gnu.org/archive/html/qemu-devel/2012-04/msg03793.html
the fix will be in qemu 1.1, and changes block-job-set-speed to use
a different parameter name, as well as adding a new optional parameter
to block-stream, which eliminates the race altogether.
Since our documentation already mentioned that we can refuse a non-zero
bandwidth for some hypervisors, I think the best solution is to do
just that for RHEL 6.2 qemu, so that the race is obvious to the user
(anyone using stock RHEL 6.2 binaries won't have this patch, and anyone
building their own libvirt with this patch for RHEL can also rebuild
qemu to get the modern semantics, so it is no real loss in behavior).
Meanwhile the code must be fixed to honor actual qemu 1.1 naming.
Rename the parameter to 'modern', since the naming difference now
covers more than just 'async' block-job-cancel. And while at it,
fix an unchecked integer overflow.
* src/qemu/qemu_monitor.h (enum BLOCK_JOB_CMD): Drop unused value,
rename enum to match conventions.
* src/qemu/qemu_monitor.c (qemuMonitorBlockJob): Reflect enum rename.
* src/qemu_qemu_monitor_json.h (qemuMonitorJSONBlockJob): Likewise.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONBlockJob): Likewise,
and support difference between RHEL 6.2 and qemu 1.1 block pull.
* src/qemu/qemu_driver.c (qemuDomainBlockJobImpl): Reject
bandwidth during pull with too-old qemu.
* src/libvirt.c (virDomainBlockPull, virDomainBlockRebase):
Document this.
Error: UNINIT:
/libvirt/src/lxc/lxc_driver.c:1412:
var_decl: Declaring variable "fd" without initializer.
/libvirt/src/lxc/lxc_driver.c:1460:
uninit_use_in_call: Using uninitialized value "fd" when calling "virFileClose".
/libvirt/src/util/virfile.c:50:
read_parm: Reading a parameter value.
Error: DEADCODE:
/libvirt/src/lxc/lxc_controller.c:960:
dead_error_condition: On this path, the condition "ret == 4" cannot be true.
/libvirt/src/lxc/lxc_controller.c:959:
at_most: After this line, the value of "ret" is at most -1.
/libvirt/src/lxc/lxc_controller.c:959:
new_values: Noticing condition "ret < 0".
/libvirt/src/lxc/lxc_controller.c:961:
dead_error_line: Execution cannot reach this statement "continue;".
Error: UNINIT:
/libvirt/src/lxc/lxc_controller.c:1104:
var_decl: Declaring variable "consoles" without initializer.
/libvirt/src/lxc/lxc_controller.c:1237:
uninit_use: Using uninitialized value "consoles".
QEMU binary is called several times when we probe different kinds of
capabilities the binary supports. This patch introduces new common
helper so that all probes use a consistent way of invoking qemu.
https://bugzilla.redhat.com/show_bug.cgi?id=816662 pointed out
that attempting 'virsh blockpull' on an offline domain gave a
misleading error message about qemu lacking support for the
operation, even when qemu was specifically updated to support it.
The real problem is that we have several capabilities that are
only determined when starting a domain, and therefore are still
clear when first working with an inactive domain (namely, any
capability set by qemuMonitorJSONCheckCommands).
While this patch was able to hoist an existing check in one of the
three culprits, it had to add redundant checks in the other two
places (because you always have to check for an active domain after
obtaining a VM job lock, but the capability bits were being checked
prior to obtaining the job lock).
Someday it would be nice to patch libvirt to cache the set of
capabilities per qemu binary (as determined by inode and timestamp),
rather than re-probing the binary every time a domain is started,
and to teach the cache how to query the monitor during the one
time the probe is made rather than having to wait until a guest
is started; then, a capability probe would succeed even for offline
guests because it just refers to the cache, and the single check for
an active domain after grabbing the job lock would be sufficient.
But since that will involve a lot more coding, I'm happy to go
with this simpler solution for an immediate solution.
* src/qemu/qemu_driver.c (qemuDomainPMSuspendForDuration)
(qemuDomainSnapshotCreateXML, qemuDomainBlockJobImpl): Check for
offline state before checking an online-only cap.
Below patch fixes the following coverity findings
Error: OVERRUN_STATIC:
/libvirt/src/qemu/qemu_command.c:152:
overrun-buffer-val: Overrunning static array "net->mac" of size 6 bytes by passing it as an argument to a function which indexes it at byte position 15.
/libvirt/src/util/virnetdevmacvlan.c:948:
access_dbuff_const: Calling "virNetDevMacVLanVPortProfileRegisterCallback" indexes array "macaddress" at byte position 15.
/libvirt/src/util/virnetdevmacvlan.c:773:
access_dbuff_const: Calling "memcpy" indexes array "macaddress" with index "16UL" at byte position 15.
Error: OVERRUN_STATIC:
/libvirt/src/qemu/qemu_migration.c:2744:
overrun-buffer-val: Overrunning static array "net->mac" of size 6 bytes by passing it as an argument to a function which indexes it at byte position 15.
/libvirt/src/util/virnetdevmacvlan.c:773:
access_dbuff_const: Calling "memcpy" indexes array "macaddress" with index "16UL" at byte position 15.
Error: OVERRUN_STATIC:
/libvirt/src/qemu/qemu_driver.c:435:
overrun-buffer-val: Overrunning static array "net->mac" of size 6 bytes by passing it as an argument to a function which indexes it at byte position 15.
/libvirt/src/util/virnetdevmacvlan.c:1036:
access_dbuff_const: Calling "virNetDevMacVLanVPortProfileRegisterCallback" indexes array "macaddress" at byte position 15.
/libvirt/src/util/virnetdevmacvlan.c:773:
access_dbuff_const: Calling "memcpy" indexes array "macaddress" with index "16UL" at byte position 15.
This patch addresses the following coverity findings:
/libvirt/src/conf/nwfilter_params.c:390:
var_assigned: Assigning: "varValue" = null return value from "virHashLookup".
/libvirt/src/conf/nwfilter_params.c:392:
dereference: Dereferencing a pointer that might be null "varValue" when calling "virNWFilterVarValueGetNthValue".
/libvirt/src/conf/nwfilter_params.c:399:
dereference: Dereferencing a pointer that might be null "tmp" when calling "virNWFilterVarValueGetNthValue".
This patch addresses the following coverity findings:
/libvirt/src/conf/nwfilter_params.c:157:
deref_parm: Directly dereferencing parameter "val".
/libvirt/src/conf/nwfilter_params.c:473:
negative_returns: Using variable "iterIndex" as an index to array "res->iter".
/libvirt/src/nwfilter/nwfilter_ebiptables_driver.c:2891:
unchecked_value: No check of the return value of "virAsprintf(&protostr, "-d 01:80:c2:00:00:00 ")".
/libvirt/src/nwfilter/nwfilter_ebiptables_driver.c:2894:
unchecked_value: No check of the return value of "virAsprintf(&protostr, "-p 0x%04x ", l3_protocols[protoidx].attr)".
/libvirt/src/nwfilter/nwfilter_ebiptables_driver.c:3590:
var_deref_op: Dereferencing null variable "inst".
Some of the error messages in this function should have been
virReportSystemError (since they have an errno they want to log), but
were mistakenly written as netlinkError, which expects a libvirt error
code instead. The result was that when one of the errors was
encountered, "No error message provided" would be printed instead of
something meaningful (see
https://bugzilla.redhat.com/show_bug.cgi?id=816465 for an example).
Once qemu monitor reports migration has completed, we just closed our
end of the pipe and let migration tunnel die. This generated bogus error
in case we did so before the thread saw EOF on the pipe and migration
was aborted even though it was in fact successful.
With this patch we first wake up the tunnel thread and once it has read
all data from the pipe and finished the stream we close the
filedescriptor.
A small additional bonus of this patch is that real errors reported
inside qemuMigrationIOFunc are not overwritten by virStreamAbort any
more.
When QEMU reported failed or canceled migration, we correctly detected
it but didn't really consider it as an error condition and migration
protocol just went on. Luckily, some of the subsequent steps eventually
failed end we reported an (unrelated and mostly random) error back to
the caller.
Currently, non-blocking calls are either sent immediately or discarded
in case sending would block. This was implemented based on the
assumption that the non-blocking keepalive call is not needed as there
are other calls in the queue which would keep the connection alive.
However, if those calls are no-reply calls (such as those carrying
stream data), the remote party knows the connection is alive but since
we don't get any reply from it, we think the connection is dead.
This is most visible in tunnelled migration. If it happens to be longer
than keepalive timeout (30s by default), it may be unexpectedly aborted
because the connection is considered to be dead.
With this patch, we only discard non-blocking calls when the last call
with a thread is completed and thus there is no thread left to keep
sending the remaining non-blocking calls.
In some cases (spotted with broken connection during tunneled migration)
we were overwriting the original error with worse or even misleading
errors generated when we were cleaning up after failed migration.
The docs for virConnectSetKeepAlive() advertise that this function
should be able to disable keepalives on negative or zero interval time.
This patch removes the check that prohibited this and adds code to
disable keepalives on negative/zero interval.
* src/libvirt.c: virConnectSetKeepAlive(): - remove check for negative
values
* src/rpc/virnetclient.c
* src/rpc/virnetclient.h: - add virNetClientKeepAliveStop() to disable
keepalive messages
* src/remote/remote_driver.c: remoteSetKeepAlive(): -add ability to
disable keepalives
This patch resolves https://bugzilla.redhat.com/show_bug.cgi?id=815270
The function virNetDevMacVLanVPortProfileRegisterCallback() takes an
arg "virtPortProfile", and was checking it for non-NULL before using
it. However, the prototype for
virNetDevMacVLanPortProfileRegisterCallback had marked that arg with
ATTRIBUTE_NONNULL(). Contrary to what one may think,
ATTRIBUTE_NONNULL() does not provide any guarantee that an arg marked
as such really is always non-null; the only effect to the code
generated by gcc, is that gcc *assumes* it is non-NULL; this results
in, for example, the check for a non-NULL value being optimized out.
(Unfortunately, this code removal only occurs when optimization is
enabled, and I am in the habit of doing local builds with optimization
off to ease debugging, so the bug didn't show up in my earlier local
testing).
In general, virPortProfile might always be NULL, so it shouldn't be
marked as ATTRIBUTE_NONNULL. One other function prototype made this
same error, so this patch fixes it as well.
Add 2 new functions to the virSocketAddr 'class':
- virSocketAddrEqual: tests whether two IP addresses and their ports are equal
- virSocketaddSetIPv4Addr: set a virSocketAddr given a 32 bit int
This patch improves the previously added virAtomicInt implementation
by using gcc-builtins if possible. The needed builtins are available
since GCC >= 4.1. At least the 4.0 docs don't mention them.
vboxArray is not castable to a COM item type. vboxArray is a
wrapper around the XPCOM and MSCOM specific array handling.
In this case we can avoid passing NULL as an empty array to
IMachine::Delete by passing a dummy IMedium* array with a single
NULL item.
In order to track a block copy job across libvirtd restarts, we
need to save internal XML that tracks the name of the file
holding the mirror. Displaying this name in dumpxml might also
be useful to the user, even if we don't yet have a way to (re-)
start a domain with mirroring enabled up front. This is done
with a new <mirror> sub-element to <disk>, as in:
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/original.img'/>
<mirror file='/var/lib/libvirt/images/copy.img' format='qcow2' ready='yes'/>
...
</disk>
For now, the element is output-only, in live domains; it is ignored
when defining a domain or hot-plugging a disk (since those contexts
use VIR_DOMAIN_XML_INACTIVE in parsing). The 'ready' attribute appears
when libvirt knows that the job has changed from the initial pulling
phase over to the mirroring phase, although absence of the attribute
is not a sure indicator of the current phase. If we come up with a way
to make qemu start with mirroring enabled, we can relax the xml
restriction, and allow <mirror> (but not attribute 'ready') on input.
Testing active-only XML meant tweaking the testsuite slightly, but it
was worth it.
* docs/schemas/domaincommon.rng (diskspec): Add diskMirror.
* docs/formatdomain.html.in (elementsDisks): Document it.
* src/conf/domain_conf.h (_virDomainDiskDef): New members.
* src/conf/domain_conf.c (virDomainDiskDefFree): Clean them.
(virDomainDiskDefParseXML): Parse them, but only internally.
(virDomainDiskDefFormat): Output them.
* tests/qemuxml2argvdata/qemuxml2argv-disk-mirror.xml: New test file.
* tests/qemuxml2xmloutdata/qemuxml2xmlout-disk-mirror.xml: Likewise.
* tests/qemuxml2xmltest.c (testInfo): Alter members.
(testCompareXMLToXMLHelper): Allow more test control.
(mymain): Run new test.
This patch introduces a new block job, useful for live storage
migration using pre-copy streaming. Justification for including
this under virDomainBlockRebase rather than adding a new command
includes: 1) there are now two possible block jobs in qemu, with
virDomainBlockRebase starting either type of command, and
virDomainBlockJobInfo and virDomainBlockJobAbort working to end
either type; 2) reusing this command allows distros to backport
this feature to the libvirt 0.9.10 API without a .so bump.
Note that a future patch may add a more powerful interface named
virDomainBlockJobCopy, dedicated to just the block copy job, in
order to expose even more options (such as setting an arbitrary
format type for the destination without having to probe it from a
pre-existing destination file); adding a new command for targetting
just block copy would be similar to how we already have
virDomainBlockPull for targetting just the block pull job.
Using a live VM with the backing chain:
base <- snap1 <- snap2
as the starting point, we have:
- virDomainBlockRebase(dom, disk, "/path/to/copy", 0,
VIR_DOMAIN_BLOCK_REBASE_COPY)
creates /path/to/copy with the same format as snap2, with no backing
file, so entire chain is copied and flattened
- virDomainBlockRebase(dom, disk, "/path/to/copy", 0,
VIR_DOMAIN_BLOCK_REBASE_COPY|VIR_DOMAIN_BLOCK_REBASE_COPY_RAW)
creates /path/to/copy as a raw file, so entire chain is copied and
flattened
- virDomainBlockRebase(dom, disk, "/path/to/copy", 0,
VIR_DOMAIN_BLOCK_REBASE_COPY|VIR_DOMAIN_BLOCK_REBASE_SHALLOW)
creates /path/to/copy with the same format as snap2, but with snap1 as
a backing file, so only snap2 is copied.
- virDomainBlockRebase(dom, disk, "/path/to/copy", 0,
VIR_DOMAIN_BLOCK_REBASE_COPY|VIR_DOMAIN_BLOCK_REBASE_REUSE_EXT)
reuse existing /path/to/copy (must have empty contents, and format is
probed[*] from the metadata), and copy the full chain
- virDomainBlockRebase(dom, disk, "/path/to/copy", 0,
VIR_DOMAIN_BLOCK_REBASE_COPY|VIR_DOMAIN_BLOCK_REBASE_REUSE_EXT|
VIR_DOMAIN_BLOCK_REBASE_SHALLOW)
reuse existing /path/to/copy (contents must be identical to snap1,
and format is probed[*] from the metadata), and copy only the contents
of snap2
- virDomainBlockRebase(dom, disk, "/path/to/copy", 0,
VIR_DOMAIN_BLOCK_REBASE_COPY|VIR_DOMAIN_BLOCK_REBASE_REUSE_EXT|
VIR_DOMAIN_BLOCK_REBASE_SHALLOW|VIR_DOMAIN_BLOCK_REBASE_COPY_RAW)
reuse existing /path/to/copy (must be raw volume with contents
identical to snap1), and copy only the contents of snap2
Less useful combinations:
- virDomainBlockRebase(dom, disk, "/path/to/copy", 0,
VIR_DOMAIN_BLOCK_REBASE_COPY|VIR_DOMAIN_BLOCK_REBASE_SHALLOW|
VIR_DOMAIN_BLOCK_REBASE_COPY_RAW)
fail if source is not raw, otherwise create /path/to/copy as raw and
the single file is copied (no chain involved)
- virDomainBlockRebase(dom, disk, "/path/to/copy", 0,
VIR_DOMAIN_BLOCK_REBASE_COPY|VIR_DOMAIN_BLOCK_REBASE_REUSE_EXT|
VIR_DOMAIN_BLOCK_REBASE_COPY_RAW)
makes little sense: the destination must be raw but have no contents,
meaning that it is an empty file, so there is nothing to reuse
The other three flags are rejected without VIR_DOMAIN_BLOCK_COPY.
[*] Note that probing an existing file for its format can be a security
risk _if_ there is a possibility that the existing file is 'raw', in
which case the guest can manipulate the file to appear like some other
format. But, by virtue of the VIR_DOMAIN_BLOCK_REBASE_COPY_RAW flag,
it is possible to avoid probing of raw files, at which point, probing
of any remaining file type is no longer a security risk.
It would be nice if we could issue an event when pivoting from phase 1
to phase 2, but qemu hasn't implemented that, and we would have to poll
in order to synthesize it ourselves. Meanwhile, qemu will give us a
distinct job info and completion event when we either cancel or pivot
to end the job. Pivoting is accomplished via the new:
virDomainBlockJobAbort(dom, disk, VIR_DOMAIN_BLOCK_JOB_ABORT_PIVOT)
Management applications can pre-create the copy with a relative
backing file name, and use the VIR_DOMAIN_BLOCK_REBASE_REUSE_EXT
flag to have qemu reuse the metadata; if the management application
also copies the backing files to a new location, this can be used
to perform live storage migration of an entire backing chain.
* include/libvirt/libvirt.h.in (VIR_DOMAIN_BLOCK_JOB_TYPE_COPY):
New block job type.
(virDomainBlockJobAbortFlags, virDomainBlockRebaseFlags): New enums.
* src/libvirt.c (virDomainBlockRebase): Document the new flags,
and implement general restrictions on flag combinations.
(virDomainBlockJobAbort): Document the new flag.
(virDomainSaveFlags, virDomainSnapshotCreateXML)
(virDomainRevertToSnapshot, virDomainDetachDeviceFlags): Document
restrictions.
* include/libvirt/virterror.h (VIR_ERR_BLOCK_COPY_ACTIVE): New
error.
* src/util/virterror.c (virErrorMsg): Define it.
This patch modifies the CPU comparrison function to report the
incompatibilities in more detail to ease identification of problems.
* src/cpu/cpu.h:
cpuGuestData(): Add argument to return detailed error message.
* src/cpu/cpu.c:
cpuGuestData(): Add passthrough for error argument.
* src/cpu/cpu_x86.c
x86FeatureNames(): Add function to convert a CPU definition to flag
names.
x86Compute(): - Add error message parameter
- Add macro for reporting detailed error messages.
- Improve error reporting.
- Simplify calculation of forbidden flags.
x86DataIteratorInit():
x86cpuidMatchAny(): Remove functions that are no longer needed.
* src/qemu/qemu_command.c:
qemuBuildCpuArgStr(): - Modify for new function prototype
- Add detailed error reports
- Change error code on incompatible processors
to VIR_ERR_CONFIG_UNSUPPORTED instead of
internal error
* tests/cputest.c:
cpuTestGuestData(): Modify for new function prototype
virThreadSelf tries to access the virThreadPtr stored in TLS for the
current thread via TlsGetValue. When virThreadSelf is called on a thread
that was not created via virThreadCreate (e.g. the main thread) then
TlsGetValue returns NULL as TlsAlloc initializes TLS slots to NULL.
virThreadSelf can be called on the main thread via this call chain from
virsh
vshDeinit
virEventAddTimeout
virEventPollAddTimeout
virEventPollInterruptLocked
virThreadIsSelf
triggering a segfault as virThreadSelf unconditionally dereferences the
return value of TlsGetValue.
Fix this by making virThreadSelf check the TLS slot value for NULL and
setting the given virThreadPtr accordingly.
Reported by Marcel Müller.
POSIX says that sa_sigaction is only safe to use if sa_flags
includes SA_SIGINFO; conversely, sa_handler is only safe to
use when flags excludes that bit. Gnulib doesn't guarantee
an implementation of SA_SIGINFO, but does guarantee that
if SA_SIGINFO is undefined, we can safely define it to 0 as
long as we don't dereference the 2nd or 3rd argument of
any handler otherwise registered via sa_sigaction.
Based on a report by Wen Congyang.
* src/rpc/virnetserver.c (SA_SIGINFO): Stub for mingw.
(virNetServerSignalHandler): Avoid bogus dereference.
(virNetServerFatalSignal, virNetServerNew): Set flags properly.
(virNetServerAddSignalHandler): Drop unneeded #ifdef.
I almost copied-and-pasted some redundant () into my new code,
and figured a general cleanup prereq patch would be better instead.
No semantic change.
* src/conf/domain_conf.c (virDomainLeaseDefParseXML)
(virDomainDiskDefParseXML, virDomainFSDefParseXML)
(virDomainActualNetDefParseXML, virDomainNetDefParseXML)
(virDomainGraphicsDefParseXML, virDomainVideoAccelDefParseXML)
(virDomainVideoDefParseXML, virDomainHostdevFind)
(virDomainControllerInsertPreAlloced, virDomainDefParseXML)
(virDomainObjParseXML, virDomainCpuSetFormat)
(virDomainCpuSetParse, virDomainDiskDefFormat)
(virDomainActualNetDefFormat, virDomainNetDefFormat)
(virDomainTimerDefFormat, virDomainGraphicsListenDefFormat)
(virDomainDefFormatInternal, virDomainNetGetActualHostdev)
(virDomainNetGetActualBandwidth, virDomainGraphicsGetListen):
Reduce extra ().
Ensure we don't introduce any more lousy integer parsing in new
code, while avoiding a scrub-down of existing legacy code.
Note that we also need to enable sc_prohibit_atoi_atof (see cfg.mk
local-checks-to-skip) before we are bulletproof, but that also
entails scrubbing I'm not ready to do at the moment.
* src/util/util.c (virStrToLong_i, virStrToLong_ui)
(virStrToLong_l, virStrToLong_ul, virStrToLong_ll)
(virStrToLong_ull, virStrToDouble): Mark exemptions.
* src/util/virmacaddr.c (virMacAddrParse): Likewise.
* cfg.mk (sc_prohibit_strtol): New syntax check.
(exclude_file_name_regexp--sc_prohibit_strtol): Ignore files that
I'm not willing to fix yet.
(local-checks-to-skip): Re-enable sc_prohibit_atoi_atof.
https://bugzilla.redhat.com/show_bug.cgi?id=617711 reported that
even with my recent patched to allow <memory unit='G'>1</memory>,
people can still get away with trying <memory>1G</memory> and
silently get <memory unit='KiB'>1</memory> instead. While
virt-xml-validate catches the error, our C parser did not.
Not to mention that it's always fun to fix bugs while reducing
lines of code. :)
* src/conf/domain_conf.c (virDomainParseMemory): Check for parse error.
(virDomainDefParseXML): Avoid strtoll.
* src/conf/storage_conf.c (virStorageDefParsePerms): Likewise.
* src/util/xml.c (virXPathLongBase, virXPathULongBase)
(virXPathULongLong, virXPathLongLong): Likewise.
Commit 78345c68 makes at least gcc 4.1.2 on RHEL 5 complain:
cc1: warnings being treated as errors
In file included from vbox/vbox_V4_0.c:13:
vbox/vbox_tmpl.c: In function 'vboxDomainUndefineFlags':
vbox/vbox_tmpl.c:5298: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing]
* src/vbox/vbox_tmpl.c (vboxDomainUndefineFlags): Use union to
avoid compiler warning.
DBus connection. The HAL device code further requires that
the DBus connection is integrated with the event loop and
provides such glue logic itself.
The forthcoming FirewallD integration also requires a
dbus connection with event loop integration. Thus we need
to pull the current event loop glue out of the HAL driver.
Thus we create src/util/virdbus.{c,h} files. This contains
just one method virDBusGetSystemBus() which obtains a handle
to the single shared system bus instance, with event glue
automagically setup.
Fix the support for trusted DHCP server in the ebtables code's
hard-coded function applying DHCP only filtering rules:
Rather than using a char * use the more flexible
virNWFilterVarValuePtr that contains the trusted DHCP server(s)
IP address. Process all entries.
Since all callers so far provided NULL as parameter, no changes
are necessary in any other code.
Currently upon a migration a callback is created when a 802.1qbg link
is set to PREASSOCIATE, this should not happen because this is a no-op
on most switches, and does not lead to an ASSOCIATE state. This patch
only creates callbacks when CREATE or RESTORE is requested. Migration
and libvirtd restart scenarios are already handled elsewhere.
Signed-off-by: D. Herrendoerfer <d.herrendoerfer@herrendoerfer.name>
The below patch fixes the following memory leak.
==20624== 24 bytes in 2 blocks are definitely lost in loss record 532 of 1,867
==20624== at 0x4A05E46: malloc (vg_replace_malloc.c:195)
==20624== by 0x38EC27FC01: strdup (strdup.c:43)
==20624== by 0x4EB6BA3: virDomainChrSourceDefCopy (domain_conf.c:1122)
==20624== by 0x495D76: qemuProcessFindCharDevicePTYs (qemu_process.c:1497)
==20624== by 0x498321: qemuProcessWaitForMonitor (qemu_process.c:1258)
==20624== by 0x49B5F9: qemuProcessStart (qemu_process.c:3652)
==20624== by 0x468B5C: qemuDomainObjStart (qemu_driver.c:4753)
==20624== by 0x469171: qemuDomainStartWithFlags (qemu_driver.c:4810)
==20624== by 0x4F21735: virDomainCreate (libvirt.c:8153)
==20624== by 0x4302BF: remoteDispatchDomainCreateHelper (remote_dispatch.h:852)
==20624== by 0x4F72C14: virNetServerProgramDispatch (virnetserverprogram.c:416)
==20624== by 0x4F6D690: virNetServerHandleJob (virnetserver.c:164)
==20624== by 0x4E8F43D: virThreadPoolWorker (threadpool.c:144)
==20624== by 0x4E8EAB5: virThreadHelper (threads-pthread.c:161)
==20624== by 0x38EC606CCA: start_thread (pthread_create.c:301)
==20624== by 0x38EC2E0C2C: clone (clone.S:115)
Most of our errors complaining about an inability to support a
particular action due to qemu limitations used CONFIG_UNSUPPORTED,
but we had a few outliers. Reported by Jiri Denemark.
* src/qemu/qemu_command.c (qemuBuildDriveDevStr): Prefer
CONFIG_UNSUPPORTED.
* src/qemu/qemu_driver.c (qemuDomainReboot)
(qemuDomainBlockJobImpl): Likewise.
* src/qemu/qemu_hotplug.c (qemuDomainAttachPciControllerDevice):
Likewise.
* src/qemu/qemu_monitor.c (qemuMonitorTransaction)
(qemuMonitorBlockJob, qemuMonitorSystemWakeup): Likewise.
So that a domain xml which doesn't have "placement" specified, but
"cpuset" is specified, could be parsed. And in this case, the
"placement" mode will be set as "static".
The objects (domain, pool, network, etc) for testing are defined/
started each time when opening a connect to test driver, and thus
the UUID for the objects will be generated each time, with different
values. e.g.
% for i in {1..3}; do ./tools/virsh --connect \
test:///default dumpxml test | grep uuid; done
<uuid>a1b6ee1f-97de-f0ee-617a-0cdb74947df5</uuid>
<uuid>ee68d7d2-3eb9-593e-2769-797ce1f4c4aa</uuid>
<uuid>fecb1d3a-918a-8412-e534-76192cf32b18</uuid>
It's the potential bug which can cause operations like below to fail:
$ virsh -c test:///default dumpxml test > test.xml
[ Some modificatons, though it's not supported, but it should work ]
$ virsh -c test:///default define test.xml
This patch set fixed UUID for objects which support it. (domain,
pool, network).
A "ide-drive" device can be either a hard disk or a CD-ROM,
if there is ",media=cdrom" specified for the backend, it's
a CD-ROM, otherwise it's a hard disk.
Upstream qemu splitted "ide-drive" into "ide-hd" and "ide-cd"
since commit 1f56e32, and ",media=cdrom" is not required for
ide-cd anymore. "ide-drive" is still supported for backwards
compatibility, but no doubt we should go foward.
A "scsi-disk" device can be either a hard disk or a CD-ROM,
if there is ",media=cdrom" specified for the backend, it's
a CD-ROM, otherwise it's a hard disk.
But upstream qemu splitted "scsi-disk" into "scsi-hd" and
"scsi-cd" since commit b443ae, and ",media=cdrom" is not
required for scsi-cd anymore. "scsi-disk" is still supported
for backwards compatibility, but no doubt we should go
foward.
If console[0] is an alias for serial[0], do not enforce the former to
have a PTY source type. This breaks serial consoles on stdio and makes
no sense.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
When using the xm/xend stack to manage instances there is a bug
that causes the emulated interfaces to be unusable when the vif
config contains type=ioemu.
The current code already has a special quirk to not use this
keyword if no specific model is given for the emulated NIC
(defaulting to rtl8139).
Essentially it works because regardless of the type argument,i
the Xen stack always creates emulated and paravirt interfaces and
lets the guest decide which one to use. So neither xl nor xm stack
actually require the type keyword for emulated NICs.
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Currently, we have 3 boolean arguments we have to pass
to qemuProcessStart(). As libvirt grows it is harder and harder
to remember them and their position. Therefore we should
switch to flags instead.
lvcreate want's the parent pool's name, not the pool path
lvchange and lvremove want lv specified as $vgname/$lvname
This largely worked before because these commands strip off a
starting /dev. But https://bugzilla.redhat.com/show_bug.cgi?id=714986
is from a user using a 'nested VG' that was having problems.
I couldn't find any info on nested LVM and the reporter never responded,
but I reproduced with XML that specified a valid source name, and
set target path to a symlink.
As explained in previous patch, numad will balance the affinity
dynamically, so reflecting the cpuset from numad at the first
time doesn't make much case, and may just could cause confusion.
Instead of returning a CPUs list, numad returns NUMA node
list instead, this patch is to convert the node list to
cpumap before affinity setting. Otherwise, the domain
processes will be pinned only to CPU[$numa_cell_num],
which will cause significiant performance losses.
Also because numad will balance the affinity dynamically,
reflecting the cpuset from numad back doesn't make much
sense then, and it may just could produce confusion for
the users. Thus the better way is not to reflect it back
to XML. And in this case, it's better to ignore the cpuset
when parsing XML.
The codes to update the cpuset is removed in this patch
incidentally, and there will be a follow up patch to ignore
the manually specified "cpuset" if "placement" is "auto",
and document will be updated too.
The linux-2.6.32 kernel header does not yet define IFLA_VF_MAX and others,
which breaks compiling a new libvirt on old systems like Debian Squeeze.
(I also have to add --without-macvtap --disable-werror --without-virtualport to
./configure to get it to compile.)
Signed-off-by: Philipp Hahn <hahn@univention.de>
Although it should be harmless to do:
disk = disk = def->disks[i]
some not-so-wise compilers may fool around.
Besides, such assignment is useless here.
On newer xend (v3.x and after) there is no state and domid reported
for inactive domains. When initially creating connections this is
handled in various places by assigning domain->id = -1.
But once an instance has been running, the id is set to the current
domain id. And it does not change when the instance is shut down.
So when querying the domain info, the hypervisor driver, which gets
asked first will indicate it cannot find information, then the
xend driver is asked and will set the status to NOSTATE because it
checks for the -1 domain id.
Checking domain/status for 0 seems to be more reliable for that.
One note: I am not sure whether the domain->id also should get set
back to -1 whenever any sub-driver thinks the instance is no longer
running.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=746007
BugLink: http://bugs.launchpad.net/bugs/929626
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
This patch adds a netlink callback when migrating a VEPA enabled
virtual machine. It fixes a Bug where a VM would not request a port
association when it was cleared by lldpad.
This patch requires the latest git version of lldpad to work.
Signed-off-by: D. Herrendoerfer <d.herrendoerfer@herrendoerfer.name>
If dynamic_ownership is off and we are creating a file on NFS
we force chown. This will fail as chown/chmod are not supported
on NFS. However, with no dynamic_ownership we are not required
to do any chown.
In my testing, I was able to provoke an odd block pull failure:
$ virsh blockpull dom vda --bandwidth 10000
error: Requested operation is not valid: No active operation on device: drive-virtio-disk0
merely by using gdb to artifically wait to do the block job set speed
until after the pull had already finished. But in reality, that should
be a success, since the pull finished before we had a chance to set
speed. Furthermore, using a double job lock is not only annoying, but
a bug in itself - if you do parallel virDomainBlockRebase, and hit
the race window just right, the first call grabs the VM job to start
a fast block job, then the second call grabs the VM job to start
a long-running job with unspecified speed, then the first call finally
regrabs the VM job and sets the speed, which ends up running the
second job under the speed from the first call. By consolidating
things into a single job, we avoid opening that race, as well as reduce
the time between starting the job and changing the speed, for less
likelihood of the speed change happening after block job completion
in the first place.
* src/qemu/qemu_monitor.h (BLOCK_JOB_CMD): Add new mode.
* src/qemu/qemu_driver.c (qemuDomainBlockRebase): Move secondary
job call...
(qemuDomainBlockJobImpl): ...here, for fewer locks.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONBlockJob): Change
return value on new internal mode.
Without the VIR_DOMAIN_BLOCK_JOB_ABORT_ASYNC flag, libvirt will internally
poll using qemu's "query-block-jobs" API and will not return until the
operation has been completed. API users are advised that this operation
is unbounded and further interaction with the domain during this period
may block. Future patches may refactor things to allow other queries in
parallel with this polling. For older qemu, we synthesize the cancellation
event, since qemu won't generate it.
The choice of polling duration copies from the code in qemu_migration.c.
Signed-off-by: Adam Litke <agl@us.ibm.com>
Cc: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Probably in the noise, but this will let us scale more efficiently
as we learn to recognize even more qemu events.
* src/qemu/qemu_monitor_json.c (eventHandlers): Sort.
(qemuMonitorEventCompare): New helper function.
(qemuMonitorJSONIOProcessEvent): Optimize event lookup.
Block job cancellation can take a while. Now that upstream qemu 1.1
has asynchronous block cancellation, we want to expose that to the user.
Therefore, the following updates are made to the virDomainBlockJob API:
A new block job event type VIR_DOMAIN_BLOCK_JOB_CANCELED is managed by
libvirt. Regardless of the flags used with virDomainBlockJobAbort, this
event will be raised: 1. when using synchronous block_job_cancel (the
event will be synthesized by libvirt), and 2. whenever it is received
from qemu (via asynchronous block-job-cancel). Note that the event
may be detected by libvirt even before the virDomainBlockJobAbort
completes (always true when it is synthesized, but also possible if
cancellation was fast).
A new extension flag VIR_DOMAIN_BLOCK_JOB_ABORT_ASYNC is added to the
virDomainBlockJobAbort API. When enabled, this function will allow
(but not require) asynchronous operation (ie, it returns as soon as
possible, which might be before the job has actually been canceled).
When the API is used in this mode, it is the responsibility of the
caller to wait for a VIR_DOMAIN_BLOCK_JOB_CANCELED event or poll via
the virDomainGetBlockJobInfo API to check the cancellation status.
This patch also exposes the new flag through virsh, and makes virsh
slightly easier to use (--async implies --abort, and lack of any options
implies --info), although it leaves the qemu implementation for later
patches.
Signed-off-by: Adam Litke <agl@us.ibm.com>
Cc: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
RHEL 6.2 was released with an early version of block jobs, which only
worked on the qed file format, where the commands were spelled with
underscore (contrary to QMP style), and where 'block_job_cancel' was
synchronous and did not trigger an event.
The upcoming qemu 1.1 release has fixed these short-comings [1][2]:
the commands now work on multiple file types, are spelled with dash,
and 'block-job-cancel' is asynchronous and emits an event upon conclusion.
[1]qemu commit 370521a1d6f5537ea7271c119f3fbb7b0fa57063
[2]https://lists.gnu.org/archive/html/qemu-devel/2012-04/msg01248.html
This patch recognizes the new spellings, and fixes virDomainBlockRebase
to give a graceful error when talking to a too-old qemu on a partial
rebase attempt. Fixes for the new semantics will come later. This
patch also removes a bogus ATTRIBUTE_NONNULL mistakenly added in
commit 10ec36e2.
* src/qemu/qemu_capabilities.h (QEMU_CAPS_BLOCKJOB_SYNC)
(QEMU_CAPS_BLOCKJOB_ASYNC): New bits.
* src/qemu/qemu_capabilities.c (qemuCaps): Name them.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONCheckCommands): Set
them.
(qemuMonitorJSONBlockJob): Manage both command names.
(qemuMonitorJSONDiskSnapshot): Minor formatting fix.
* src/qemu/qemu_monitor.h (qemuMonitorBlockJob): Alter signature.
* src/qemu/qemu_monitor_json.h (qemuMonitorJSONBlockJob): Likewise.
* src/qemu/qemu_monitor.c (qemuMonitorBlockJob): Pass through
capability bit.
* src/qemu/qemu_driver.c (qemuDomainBlockJobImpl): Update callers.
The new safe console handling introduced a possibility to deadlock the
qemu driver when a new console connection forcibly disconnects a
previous console stream that belongs to an already closed connection.
The virStreamFree function calls subsequently a the virReleaseConnect
function that tries to lock the driver while discarding the connection,
but the driver was already locked in qemuDomainOpenConsole.
Backtrace of the deadlocked thread:
0 0x00007f66e5aa7f14 in __lll_lock_wait () from /lib64/libpthread.so.0
1 0x00007f66e5aa3411 in _L_lock_500 () from /lib64/libpthread.so.0
2 0x00007f66e5aa322a in pthread_mutex_lock () from/lib64/libpthread.so.0
3 0x0000000000462bbd in qemudClose ()
4 0x00007f66e6e178eb in virReleaseConnect () from/usr/lib64/libvirt.so.0
5 0x00007f66e6e19c8c in virUnrefStream () from /usr/lib64/libvirt.so.0
6 0x00007f66e6e3d1de in virStreamFree () from /usr/lib64/libvirt.so.0
7 0x00007f66e6e09a5d in virConsoleHashEntryFree () from/usr/lib64/libvirt.so.0
8 0x00007f66e6db7282 in virHashRemoveEntry () from/usr/lib64/libvirt.so.0
9 0x00007f66e6e09c4e in virConsoleOpen () from /usr/lib64/libvirt.so.0
10 0x00000000004526e9 in qemuDomainOpenConsole ()
11 0x00007f66e6e421f1 in virDomainOpenConsole () from/usr/lib64/libvirt.so.0
12 0x00000000004361e4 in remoteDispatchDomainOpenConsoleHelper ()
13 0x00007f66e6e80375 in virNetServerProgramDispatch () from/usr/lib64/libvirt.so.0
14 0x00007f66e6e7ae11 in virNetServerHandleJob () from/usr/lib64/libvirt.so.0
15 0x00007f66e6da897d in virThreadPoolWorker () from/usr/lib64/libvirt.so.0
16 0x00007f66e6da7ff6 in virThreadHelper () from/usr/lib64/libvirt.so.0
17 0x00007f66e5aa0c5c in start_thread () from /lib64/libpthread.so.0
18 0x00007f66e57e7fcd in clone () from /lib64/libc.so.6
* src/qemu/qemu_driver.c: qemuDomainOpenConsole()
-- unlock the qemu driver right after acquiring the domain
object
In case an API fails with "cannot acquire state change lock", searching
for the API that possibly forgot to end its job is not always easy.
Let's keep track of the job owner and print it out for easier
identification.
As reported by Daniel Berrangé, we have a huge performance regression
for virDomainGetInfo() due to the change which makes virDomainEndJob()
save the XML status file every time it is called. Previous to that
change, 2000 calls to virDomainGetInfo() took ~2.5 seconds. After that
change, 2000 calls to virDomainGetInfo() take 2 *minutes* 45 secs.
We made the change to be able to recover from libvirtd restart in the
middle of a job. However, only destroy and async jobs are taken care of.
Thus it makes more sense to only save domain state XML when these jobs
are started/stopped.
I noticed these compiler warnings when building for the s390 architecture.
* src/node_device/node_device_udev.c (udevDeviceMonitorStartup):
Mark unused variable.
* src/nodeinfo.c (linuxNodeInfoCPUPopulate): Avoid unused variable.
* src/qemu/qemu_command.c: Wire up -bios with <loader>
* tests/qemuxml2argvdata/qemuxml2argv-bios.args,
tests/qemuxml2argvdata/qemuxml2argv-bios.xml: Expand
existing BIOS test case to cover <loader>
Leak introduced in commit 0436d32. If we allocate an actions array,
but fail early enough to never consume it with the qemu monitor
transaction call, we leaked memory.
But our semantics of making the transaction command free the caller's
memory is awkward; avoiding the memory leak requires making every
intermediate function in the call chain check for error. It is much
easier to fix things so that the function that allocates also frees,
while the call chain leaves the caller's data intact. To do that,
I had to hack our JSON data structure to make it easy to protect a
portion of an arbitrary JSON tree from being freed.
* src/util/json.h (virJSONType): Name the enum.
(_virJSONValue): New field.
* src/util/json.c (virJSONValueFree): Use it to protect a portion
of an array.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONTransaction): Avoid
freeing caller's data.
* src/qemu/qemu_driver.c (qemuDomainSnapshotCreateDiskActive):
Free actions array on failure.
We can tell qemuDomainSnapshotFSThaw if we want it to report errors or
not. However, if we don't want to and an error has been already set by
previous qemuReportError() we must keep copy of that error not just a
pointer to it. Otherwise, it get overwritten if FSThaw reports an error.
Detected by valgrind. Leaks are introduced in commit b22eaa7.
* src/conf/domain_conf.c (virDomainDiskDefParseXML): fix memory leaks.
How to reproduce?
% make && make -C tests check TESTS=qemuxml2argvtest
% cd tests && valgrind -v --leak-check=full ./qemuxml2argvtest
actual result:
==2143== 12 bytes in 2 blocks are definitely lost in loss record 74 of 179
==2143== at 0x4A05FDE: malloc (vg_replace_malloc.c:236)
==2143== by 0x39D90A67DD: xmlStrndup (xmlstring.c:45)
==2143== by 0x4F5EC0: virDomainDiskDefParseXML (domain_conf.c:3438)
==2143== by 0x502F00: virDomainDefParseXML (domain_conf.c:8304)
==2143== by 0x505FE3: virDomainDefParseNode (domain_conf.c:9080)
==2143== by 0x5069AE: virDomainDefParse (domain_conf.c:9030)
==2143== by 0x41CBF4: testCompareXMLToArgvHelper (qemuxml2argvtest.c:105)
==2143== by 0x41E5DD: virtTestRun (testutils.c:145)
==2143== by 0x416FA3: mymain (qemuxml2argvtest.c:399)
==2143== by 0x41DCB7: virtTestMain (testutils.c:700)
==2143== by 0x39CF01ECDC: (below main) (libc-start.c:226)
Signed-off-by: Alex Jia <ajia@redhat.com>
If the daemon is restarted it will lose list of active
USB devices assigned to active domains. Therefore we need
to rebuild this list on qemuProcessReconnect().
To prevent assigning one USB device to two domains,
we keep a list of assigned USB devices. On domain
startup - qemuProcessStart() - we insert devices
used by domain into the list but remove them only
on detach-device. Devices are, however, released
on qemuProcessStop() as well.
Originally, qemuDomainCheckEjectableMedia was entering monitor with qemu
driver lock. Commit 2067e31bf9, which I
made to fix that, revealed another issue we had (but didn't notice it
since the driver was locked): we didn't set nested job when
qemuDomainCheckEjectableMedia is called during migration. Thus the
original fix I made was wrong.
XenD-3.1 introduced managed domains. HV-domains have rtc_timeoffset
(hgd24f37b31030 from 2007-04-03), which tracks the offset between the
hypervisors clock and the domains RTC, and is persisted by XenD.
In combination with localtime=1 this had a bug until XenD-3.4
(hg5d701be7c37b from 2009-04-01) (I'm not 100% sure how that bug
manifests, but at least for me in TZ=Europe/Berlin I see the previous
offset relative to utc being applied to localtime again, which manifests
in an extra hour being added)
XenD implements the following variants for clock/@offset:
- PV domains don't have a RTC → 'localtime' | 'utc'
- <3.1: no managed domains → 'localtime' | 'utc'
- ≥3.1: the offset is tracked for HV → 'variable'
due to the localtime=1 bug → 'localtime' | 'utc'
- ≥3.4: the offset is tracked for HV → 'variable'
Current libvirtd still thinks XenD only implements <clock offset='utc'/>
and <clock offset='localtime'/>, which is wrong, since the semantic of
'utc' and 'localtime' specifies, that the offset will be reset on
domain-restart, while with 'variable' the offset is kept. (keeping the
offset over "virsh edit" is important, since otherwise the clock might
jump, which confuses certain guest OSs)
xendConfigVersion was last incremented to 4 by the xen-folks for
xen-3.1.0. I know of no way to reliably detect the version of XenD
(user space tools), which may be different from the version of the
hypervisor (kernel) version! Because of this only the change from
'utc'/'localtime' to 'variable' in XenD-3.1 is handled, not the buggy
behaviour of XenD-3.1 until XenD-3.4.
For backward compatibility with previous versions of libvirt Xen-HV
still accepts 'utc' and 'localtime', but they are returned as 'variable'
on the next read-back from Xend to libvirt, since this is what XenD
implements: The RTC is NOT reset back to the specified time on next
restart, but the previous offset is kept.
This behaviour can be turned off by adding the additional attribute
adjustment='reset', in which case libvirt will report an error instead
of doing the conversion. The attribute can also be used as a shortcut to
offset='variable' with basis='...'.
With these changes, it is also necessary to adjust the xen tests:
"localtime = 0" is always inserted, because otherwise on updates the
value is not changed within XenD.
adjustment='reset' is inserted for all cases, since they're all <
XEND_CONFIG_VERSION_3_1_0, only 3.1 introduced persistent
rtc_timeoffset.
Some statements change their order because code was moved around.
Signed-off-by: Philipp Hahn <hahn@univention.de>
Since Xen 3.1 the clock=variable semantic is supported. In addition to
qemu/kvm Xen also knows about a variant where the offset is relative to
'localtime' instead of 'utc'.
Extends the libvirt structure with a flag 'basis' to specify, if the
offset is relative to 'localtime' or 'utc'.
Extends the libvirt structure with a flag 'reset' to force the reset
behaviour of 'localtime' and 'utc'; this is needed for backward
compatibility with previous versions of libvirt, since they report
incorrect XML.
Adapt the only user 'qemu' to the new name.
Extend the RelaxNG schema accordingly.
Document the new 'basis' attribute in the HTML documentation.
Adapt test for the new attribute.
Signed-off-by: Philipp Hahn <hahn@univention.de>
https://bugzilla.redhat.com/show_bug.cgi?id=808979
The leak is really in virProcessInfoGetAffinity, as shown in the
valgrind output given in the above bug report - it calls CPU_ALLOC(),
but then fails to call CPU_FREE().
This leak has existed in every version of libvirt since 0.7.5.
Commit 1b1402b introduced a regression. Since older libvirt versions
would silently round memory up (until the previous patch), but populated
current memory based on querying the guest, it was possible to have
dumpxml show cur > max by the amount of the rounding. For example, if
a user requested 1048570 KiB memory (just shy of 1GiB), the qemu
driver would actually run with 1048576 KiB, and libvirt 0.9.10 would
output a current that was 6KiB larger than the maximum. Situations
where this could have an impact include, but are not limited to,
migration from old to new libvirt, managedsave in old libvirt and
start in new libvirt, snapshot creation in old libvirt and revert in
new libvirt - without this patch, the new libvirt would reject the
VM because of the rounding discrepancy.
Fix things by adding a fuzz factor, and silently clamp current down to
maximum in that case, rather than failing to reparse XML for an existing
VM. From a practical standpoint, this has no user impact: 'virsh
dumpxml' will continue to query the running guest rather than rely on
the incoming xml, which will see the currect current value, and even if
clamping down occurs during parsing, it will be by at most the fuzz
factor of a megabyte alignment, and rounded back up when passed back to
the hypervisor.
Meanwhile, we continue to reject cur > max if the difference is beyond
the fuzz factor of nearest megabyte. But this is not a real change in
behavior, since with 0.9.10, even though the parser allowed it, later
in the processing stream we would reject it at the qemu layer; so
rejecting it in the parser just moves error detection to a nicer place.
* src/conf/domain_conf.c (virDomainDefParseXML): Don't reject
existing XML.
Based on a report by Zhou Peng.
If we round up a user's memory request, we should update the XML
to reflect the actual value in use by the VM, rather than giving
an artificially small value back to the user.
* src/qemu/qemu_command.c (qemuBuildNumaArgStr)
(qemuBuildCommandLine): Reflect rounding back to XML.
This patch was created to resolve this upstream bug:
https://bugzilla.redhat.com/show_bug.cgi?id=784767
and is at least a partial solution to this RHEL RFE:
https://bugzilla.redhat.com/show_bug.cgi?id=805071
Previously the only attribute of a network device that could be
modified by virUpdateDeviceFlags() ("virsh update-device") was the
link state; attempts to change any other attribute would log an error
and fail.
This patch adds recognition of a change in bridge device name, and
supports reconnecting the guest's interface to the new device.
Standard audit logs for detaching and attaching a network device are
also generated. Although the current auditing function doesn't log the
bridge being attached to, this will later be changed in a separate
patch.
Regression introduced when we changed types in commit 3e2c3d8f6.
We've done this sort of cleanup before (see commit c685993d7).
* src/conf/storage_conf.c (virStoragePoolDefFormat)
(virStorageVolTargetDefFormat): Cast gid_t and uid_t.
We are so close to a release that we don't want to pull in a
gnulib submodule update and risk regressions, since there has
been a lot of other gnulib churn upstream. However, there are
a couple of gnulib issues that are worth fixing in isolation,
by applying local patches to gnulib.
There was an upstream gnulib bug in maint.mk that rendered most
of our syntax checks ineffective (and fixing it flushed out a
minor bug in our code):
https://lists.gnu.org/archive/html/bug-gnulib/2012-03/msg00194.html
There is still an upstream bug where gnulib uses the wrong type
for ssize_t on mingw; we need the fix now even though it has not
yet been accepted into gnulib:
https://lists.gnu.org/archive/html/bug-gnulib/2012-03/msg00188.html
* gnulib/local/top/maint.mk.diff: Pick up upstream gnulib
maint.mk.
* gnulib/local/m4/ssize_t.m4.diff: Work around gnulib bug.
* src/libvirt.c: Remove unused header.
* cfg.mk
(exclude_file_name_regexp--sc_prohibit_empty_lines_at_EOF): Exempt
gnulib local files.
qemuBuildHostNetStr had a switch-within-a-switch where both were
looking at the same variable. This was apparently to take advantage of
code common to three different cases (while also taking care of some
code that was different). However, there were only 2 lines common to
all, one of those can be eliminated by merging it into the
virAsprintfs that are in each case. On top of that, all the extra
empty cases cause Coverity complaints (because they are unreachable),
but absence of the empty cases causes a compile error due to
"enumeration value not handled in switch".
The solution is to just make each toplevel case independent, folding
in the common code to each.
commit b0e2bb33 set a default value for the SPICE agent channel by
inserting it during parsing of the channel XML. That method of setting
a default is problematic because it makes a format/parse roundtrip
unclean, and experience with setting other values as a side effect of
parsing has led to headaches (e.g. automatically setting a MAC address
in the parser when one isn't specified in the input XML).
This patch does not revert commit b0e2bb33 (it will be reverted in a
separate patch) but adds the alternate implementation of simply
inserting the default value in the appropriate place on the qemu
commandline when no value is provided.
If we issue guest command and GA is not running, the issuing thread
will block endlessly. We can check for GA presence by issuing
guest-sync with unique ID (timestamp). We don't want to issue real
command as even if GA is not running, once it is started, it process
all commands written to GA socket.
With latest gnulib we are checking even the lowest level functions
whether they check flags. Moreover, we are shadowing the real error
on system without TUNSETIFF support.
The code is splattered with a mix of
sizeof foo
sizeof (foo)
sizeof(foo)
Standardize on sizeof(foo) and add a syntax check rule to
enforce it
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
A handful of places used %zd for format specifiers even
though the args was size_t, not ssize_t.
* src/remote/remote_driver.c, src/util/xml.c: s/%zd/%zu/
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
* src/conf/domain_conf.c (virDomainChannelDefCheckABIStability): avoid
crashing libvirtd due to derefing a NULL pointer.
For details, please see bug:
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=808371
Signed-off-by: Alex Jia <ajia@redhat.com>
When qemu cannot start, we may call qemuProcessStop() twice.
We have check whether the vm is running at the beginning of
qemuProcessStop() to avoid libvirt deadlock. We call
qemuProcessStop() with driver and vm locked. It seems that
we can avoid libvirt deadlock. But unfortunately we may
unlock driver and vm in the function qemuProcessKill() while
vm->def->id is not -1. So qemuProcessStop() will be run twice,
and monitor will be freed unexpectedly. So we should set
vm->def->id to -1 at the beginning of qemuProcessStop().
An upstream gnulib bug[1] meant that some of our syntax checks
weren't being run. Fix up our offenders before we upgrade to
a newer gnulib.
[1] https://lists.gnu.org/archive/html/bug-gnulib/2012-03/msg00194.html
* src/util/virnetdevtap.c (virNetDevTapCreate): Use flags.
* tests/lxcxml2xmltest.c (mymain): Strip useless ().
In the current V3 migration protocol, Libvirt does not
check the result of the function
qemuMigrationVPAssociatePortProfiles
This means that it is possible for a migration to complete
successfully even when the VM loses network connectivity on
the destination host.
With this change libvirt aborts the migration
(during the "finish" step) when the above function fails, that
is to say when at least one of the port profile associations fails.
Signed-off by: Christian Benvenuti <benve@cisco.com>
libvirt documentation for channels with type 'spicevmc' says that the
'target' child node has:
"an optional attribute name controls how the guest will have access
to the channel, and defaults to name='com.redhat.spice.0'."
However, this default value is never set in libvirt code base,
there's only a check in qemu_command.c to error out if the name
attribute doesn't have the expected value (if it's set).
This commit sets a default target name for spicevmc channels during
the domain configuration parsing so that the code agrees with the
documentation.
Commit d42a2ff caused a regression in creating a disk-only snapshot
of a qcow2 disk; by passing the wrong variable to the monitor call,
libvirt ended up creating JSON that looked like "format":null instead
of the intended "format":"qcow2".
To make it easier to diagnose this in the future, make JSON creation
error out if "s:arg" is paired with NULL (it is still possible to
use "n:arg" in the rare cases where qemu will accept a null).
* src/qemu/qemu_driver.c
(qemuDomainSnapshotCreateSingleDiskActive): Pass correct value.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONMakeCommandRaw):
Improve error message.
Pass argv to the init binary of LXC, using a new <initarg> element.
* docs/formatdomain.html.in: Document <os> usage for containers
* docs/schemas/domaincommon.rng: Add <initarg> element
* src/conf/domain_conf.c, src/conf/domain_conf.h: parsing and
formatting of <initarg>
* src/lxc/lxc_container.c: Setup LXC argv
* tests/Makefile.am, tests/lxcxml2xmldata/lxc-systemd.xml,
tests/lxcxml2xmltest.c, tests/testutilslxc.c,
tests/testutilslxc.h: Test parsing/formatting of LXC related
XML parts
The SELinux mount point moved from /selinux to /sys/fs/selinux
when systemd came along.
* configure.ac: Probe for SELinux mount point
* src/lxc/lxc_container.c: Use SELinux mount point determined
by configure.ac
When libvirtd is restarted, also restart the netlink event
message callbacks for existing VEPA connections and send
a message to lldpad for these existing links, so it learns
the new libvirtd pid.
Signed-off-by: D. Herrendoerfer <d.herrendoerfer@herrendoerfer.name>
This avoids possible deadlock of the qemu driver in case a domain is
begin migrated (in Begin phase) and unrelated connection to qemu driver
is closed at the right time.
I checked all callers of qemuDomainCheckEjectableMedia() and they are
calling this function with qemu driver locked.
Found when attempting to build on Fedora 17 alpha with:
./autogen.sh --system --enable-compile-warnings=error
(this same build command works without problem on Fedora 16). Since
the consumer of the qemuProcessReconnectData doesn't assume that the
other fields of the struct are initialized (although it uses them
internally), the simpler solution is to just switch to C99-style
struct initialization (which doesn't require specification of all
fields).
libvirt always adds -Werror-frame-larger-than=4096 to the flags when
it builds. When building on Fedora 17, two functions with multiple
1024 buffers declared inside if {} blocks would generate frame size
errors; apparently the version of gcc on Fedora 16 will merge these
multiple buffers into a single buffer even when optimization is off,
but Fedora 17 won't.
The fix is to declare a single 1024 buffer at the top of the two
offending functions, and reuse the single buffer throughout the
functions.
Return statements with parameter enclosed in parentheses were modified
and parentheses were removed. The whole change was scripted, here is how:
List of files was obtained using this command:
git grep -l -e '\<return\s*([^()]*\(([^()]*)[^()]*\)*)\s*;' | \
grep -e '\.[ch]$' -e '\.py$'
Found files were modified with this command:
sed -i -e \
's_^\(.*\<return\)\s*(\(\([^()]*([^()]*)[^()]*\)*\))\s*\(;.*$\)_\1 \2\4_' \
-e 's_^\(.*\<return\)\s*(\([^()]*\))\s*\(;.*$\)_\1 \2\3_'
Then checked for nonsense.
The whole command looks like this:
git grep -l -e '\<return\s*([^()]*\(([^()]*)[^()]*\)*)\s*;' | \
grep -e '\.[ch]$' -e '\.py$' | xargs sed -i -e \
's_^\(.*\<return\)\s*(\(\([^()]*([^()]*)[^()]*\)*\))\s*\(;.*$\)_\1 \2\4_' \
-e 's_^\(.*\<return\)\s*(\([^()]*\))\s*\(;.*$\)_\1 \2\3_'
When qparams support was dropped in commit bc1ff160, we forgot
to add tests to ensure that viruri can do the same round trip
handling of a URI. This round trip was broken, due to use
of the old 'query' field of xmlUriPtr, instead of the new
'query_raw'
Also, we forgot to report an OOM error.
* tests/viruritest.c (mymain): Add tests based on just-deleted
qparamtest.
(testURIParse): Allow difference in input and expected output.
* src/util/viruri.c (virURIFormat): Add missing error. Use
query_raw, instead of query for xmlUriPtr object.
The oVirt developers have stated that the real reasons they want
to have qemu reuse existing volumes when creating a snapshot are:
1. the management framework is set up so that creation has to be
done from a central node for proper resource tracking, and having
libvirt and/or qemu create things violates the framework, and
2. qemu defaults to creating snapshots with an absolute path to
the backing file, but oVirt wants to manage a backing chain that
uses just relative names, to allow for easier migration of a chain
across storage locations.
When 0.9.10 added VIR_DOMAIN_SNAPSHOT_CREATE_REUSE_EXT (commit
4e9953a4), it only addressed point 1, but libvirt was still using
O_TRUNC which violates point 2. Meanwhile, the new qemu
'transaction' monitor command includes a new optional mode argument
that will force qemu to reuse the metadata of the file it just
opened (with the burden on the caller to have valid metadata there
in the first place). So, this tweaks the meaning of the flag to
cover both points as intended for use by oVirt. It is not strictly
backward-compatible to 0.9.10 behavior, but it can be argued that
the O_TRUNC of 0.9.10 was a bug.
Note that this flag is all-or-nothing, and only selects between
'existing' and the default 'absolute-paths'. A more flexible
approach that would allow per-disk selections, as well as adding
support for the 'no-backing-file' mode, would be possible by
extending the <domainsnapshot> xml to have a per-disk mode, but
until we have a management application expressing a need for that
additional complexity, it is not worth doing.
* src/libvirt.c (virDomainSnapshotCreateXML): Tweak documentation.
* src/qemu/qemu_monitor.h (qemuMonitorDiskSnapshot): Add
parameters.
* src/qemu/qemu_monitor_json.h (qemuMonitorJSONDiskSnapshot):
Likewise.
* src/qemu/qemu_monitor.c (qemuMonitorDiskSnapshot): Pass them
through.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONDiskSnapshot): Use
new monitor command arguments.
* src/qemu/qemu_driver.c (qemuDomainSnapshotCreateDiskActive)
(qemuDomainSnapshotCreateSingleDiskActive): Adjust callers.
(qemuDomainSnapshotDiskPrepare): Allow qed, modify rules on reuse.
The hardest part about adding transactions is not using the new
monitor command, but undoing the partial changes we made prior
to a failed transaction.
* src/qemu/qemu_driver.c (qemuDomainSnapshotCreateDiskActive): Use
transaction when available.
(qemuDomainSnapshotUndoSingleDiskActive): New function.
(qemuDomainSnapshotCreateSingleDiskActive): Pass through actions.
(qemuDomainSnapshotCreateXML): Adjust caller.
QEmu 1.1 is adding a 'transaction' command to the JSON monitor.
Each element of a transaction corresponds to a top-level command,
with the additional guarantee that the transaction flushes all
pending I/O, then guarantees that all actions will be successful
as a group or that failure will roll back the state to what it
was before the monitor command. The difference between a
top-level command:
{ "execute": "blockdev-snapshot-sync", "arguments":
{ "device": "virtio0", ... } }
and a transaction:
{ "execute": "transaction", "arguments":
{ "actions": [
{ "type": "blockdev-snapshot-sync", "data":
{ "device": "virtio0", ... } } ] } }
is just a couple of changed key names and nesting the shorter
command inside a JSON array to the longer command. This patch
just adds the framework; the next patch will actually use a
transaction.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONMakeCommand): Move
guts...
(qemuMonitorJSONMakeCommandRaw): ...into new helper. Add support
for array element.
(qemuMonitorJSONTransaction): New command.
(qemuMonitorJSONDiskSnapshot): Support use in a transaction.
* src/qemu/qemu_monitor_json.h (qemuMonitorJSONDiskSnapshot): Add
argument.
(qemuMonitorJSONTransaction): New declaration.
* src/qemu/qemu_monitor.h (qemuMonitorTransaction): Likewise.
(qemuMonitorDiskSnapshot): Add argument.
* src/qemu/qemu_monitor.c (qemuMonitorTransaction): New wrapper.
(qemuMonitorDiskSnapshot): Pass argument on.
* src/qemu/qemu_driver.c
(qemuDomainSnapshotCreateSingleDiskActive): Update caller.
Taking an external snapshot of just one disk is atomic, without having
to pause and resume the VM. This also paves the way for later patches
to interact with the new qemu 'transaction' monitor command.
The various scenarios when requesting atomic are:
online, 1 disk, old qemu - safe, allowed by this patch
online, more than 1 disk, old qemu - failure, this patch
offline snapshot - safe, once a future patch implements offline disk snapshot
online, 1 or more disks, new qemu - safe, once future patch uses transaction
Taking an online system checkpoint snapshot is atomic, since it is
done via a single 'savevm' monitor command. Taking an offline system
checkpoint snapshot is atomic, thanks to the previous patch.
* src/qemu/qemu_driver.c (qemuDomainSnapshotCreateXML): Support
new flag for single-disk setups.
(qemuDomainSnapshotDiskPrepare): Check for atomic here.
(qemuDomainSnapshotCreateDiskActive): Skip pausing the VM when
atomic supported.
(qemuDomainSnapshotIsAllowed): Use bool instead of int.
Offline internal snapshots can be rolled back with just a little
bit of refactoring, meaning that we are now automatically atomic.
* src/qemu/qemu_domain.c (qemuDomainSnapshotForEachQcow2): Move
guts...
(qemuDomainSnapshotForEachQcow2Raw): ...to new helper, to allow
rollbacks.
Right now, it is appallingly easy to cause qemu disk snapshots
to alter a domain then fail; for example, by requesting a two-disk
snapshot where the second disk name resides on read-only storage.
In this failure scenario, libvirt reports failure, but modifies
the live domain XML in-place to record that the first disk snapshot
was taken; and places a difficult burden on the management app
to grab the XML and reparse it to see which disks, if any, were
altered by the partial snapshot.
This patch adds a new flag where implementations can request that
the hypervisor make snapshots atomically; either no changes to
XML occur, or all disks were altered as a group. If you request
the flag, you either get outright failure up front, or you take
advantage of hypervisor abilities to make an atomic snapshot. Of
course, drivers should prefer the atomic means even without the
flag explicitly requested.
There's no way to make snapshots 100% bulletproof - even if the
hypervisor does it perfectly atomic, we could run out of memory
during the followup tasks of updating our in-memory XML, and report
a failure. However, these sorts of catastrophic failures are rare
and unlikely, and it is still nicer to know that either all
snapshots happened or none of them, as that is an easier state to
recover from.
* include/libvirt/libvirt.h.in
(VIR_DOMAIN_SNAPSHOT_CREATE_ATOMIC): New flag.
* src/libvirt.c (virDomainSnapshotCreateXML): Document it.
* tools/virsh.c (cmdSnapshotCreate, cmdSnapshotCreateAs): Expose it.
* tools/virsh.pod (snapshot-create, snapshot-create-as): Document
it.
We need a capability bit to gracefully error out if some of the
additions in future patches can't be implemented by the running qemu.
* src/qemu/qemu_capabilities.h (QEMU_CAPS_TRANSACTION): New cap.
* src/qemu/qemu_capabilities.c (qemuCaps): Name it.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONCheckCommands): Set
it.
Recent changes have caused build failures on systems where pdwtags works:
commit a26a196 mistakenly exported a public variable
commits a26a196, 57ddcc2, 487c063 all had copy-paste bugs in
hand-updating the golden API rather than rerunning pdwtags
* include/libvirt/libvirt.h.in (virDomainEventTrayChangeReason):
Make this a typedef, not external storage.
* src/remote_protocol-structs (remote_procedure): Fix spelling.
This introduces a new running reason VIR_DOMAIN_RUNNING_WAKEUP,
and new suspend event type VIR_DOMAIN_EVENT_STARTED_WAKEUP.
While a wakeup event is emitted, the domain which entered into
VIR_DOMAIN_PMSUSPENDED will be transferred to "running"
with reason VIR_DOMAIN_RUNNING_WAKEUP, and a new domain lifecycle
event emitted with type VIR_DOMAIN_EVENT_STARTED_WAKEUP.
This introduces a new domain state pmsuspended to represent
the domain which has been suspended by guest power management,
e.g. (entered itno s3 state). Because a "running" state could
be confused in this case, one will see the guest is paused
actually while playing. And state "paused" is for the domain
which was paused by virDomainSuspend.
This patch introduces a new event type for the QMP event
SUSPEND:
VIR_DOMAIN_EVENT_ID_PMSUSPEND
The event doesn't take any data, but considering there might
be reason for wakeup in future, the callback definition is:
typedef void
(*virConnectDomainEventSuspendCallback)(virConnectPtr conn,
virDomainPtr dom,
int reason,
void *opaque);
"reason" is unused currently, always passes "0".
This patch introduces a new event type for the QMP event
WAKEUP:
VIR_DOMAIN_EVENT_ID_PMWAKEUP
The event doesn't take any data, but considering there might
be reason for wakeup in future, the callback definition is:
typedef void
(*virConnectDomainEventWakeupCallback)(virConnectPtr conn,
virDomainPtr dom,
int reason,
void *opaque);
"reason" is unused currently, always passes "0".
This is similiar with physical world, one will be surprised if the
box starts with medium exists while the tray is open.
New tests are added, tests disk-{cdrom,floppy}-tray are for the qemu
supports "-device" flag, and disk-{cdrom,floppy}-no-device-cap are
for old qemu, i.e. which doesn't support "-device" flag.
This patch introduces a new event type for the QMP event
DEVICE_TRAY_MOVED, which occurs when the tray of a removable
disk is moved (i.e opened or closed):
VIR_DOMAIN_EVENT_ID_TRAY_CHANGE
The event's data includes the device alias and the reason
for tray status' changing, which indicates why the tray
status was changed. Thus the callback definition for the event
is:
enum {
VIR_DOMAIN_EVENT_TRAY_CHANGE_OPEN = 0,
VIR_DOMAIN_EVENT_TRAY_CHANGE_CLOSE,
\#ifdef VIR_ENUM_SENTINELS
VIR_DOMAIN_EVENT_TRAY_CHANGE_LAST
\#endif
} virDomainEventTrayChangeReason;
typedef void
(*virConnectDomainEventTrayChangeCallback)(virConnectPtr conn,
virDomainPtr dom,
const char *devAlias,
int reason,
void *opaque);
Libvirt on x86 parses 'dmidecode' to gather characteristics of host
system. On PowerPC, this is now implemented by reading /proc/cpuinfo
NOTE: memory-DIMM information is not presently implemented.
Acked-by: Daniel Veillard <veillard@redhat.com>
Acked-by: Daniel P Berrange <berrange@redhat.com>
Signed-off-by: Prerna Saxena <prerna@linux.vnet.ibm.com>
When SASL requests auth credentials, try to look them up in the
config file first. If any are found, remove them from the list
that the user is prompted for
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
SASL may prompt for credentials after either a 'start' or 'step'
invocation. In both cases the code to handle this is the same.
Refactor this code into a separate method to reduce the duplication,
since the complexity is about to grow
* src/remote/remote_driver.c: Refactor interaction with SASL
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Ensure that the functions in virauth.h have names matching the file
prefix, by renaming virRequest{Username,Password} to
virAuthGet{Username,Password}
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To follow latest naming conventions, rename src/util/authhelper.[ch]
to src/util/virauth.[ch].
* src/util/authhelper.[ch]: Rename to src/util/virauth.[ch]
* src/esx/esx_driver.c, src/hyperv/hyperv_driver.c,
src/phyp/phyp_driver.c, src/xenapi/xenapi_driver.c: Update
for renamed include files
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The '.ini' file format is a useful alternative to the existing
config file style, when you need to have config files which
are hashes of hashes. The 'virKeyFilePtr' object provides a
way to parse these file types.
* src/Makefile.am, src/util/virkeyfile.c,
src/util/virkeyfile.h: Add .ini file parser
* tests/Makefile.am, tests/virkeyfiletest.c: Test
basic parsing capabilities
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Convert drivers currently using the qparams APIs, to instead
use the virURIPtr query parameters directly.
* src/esx/esx_util.c, src/hyperv/hyperv_util.c,
src/remote/remote_driver.c, src/xenapi/xenapi_utils.c: Remove
use of qparams
* src/util/qparams.h, src/util/qparams.c: Delete
* src/Makefile.am, src/libvirt_private.syms: Remove qparams
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Avoid the need for each driver to parse query parameters itself
by storing them directly in the virURIPtr struct. The parsing
code is a copy of that from src/util/qparams.c The latter will
be removed in a later patch
* src/util/viruri.h: Add query params to virURIPtr
* src/util/viruri.c: Parse query parameters when creating virURIPtr
* tests/viruritest.c: Expand test to cover params
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Instead of just typedef'ing the xmlURIPtr struct for virURIPtr,
use a custom libvirt struct. This allows us to fix various
problems with libxml2. This initially just fixes the query vs
query_raw handling problems.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The parameter in the virURIFormat impl mistakenly used the
xmlURIPtr type, instead of virURIPtr. Since they will soon
cease to be identical, this needs fixing
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Since we defined a custom virURIPtr type, we should use a
virURIFree method instead of assuming it will always be
a typedef for xmlURIPtr
* src/util/viruri.c, src/util/viruri.h, src/libvirt_private.syms:
Add a virURIFree method
* src/datatypes.c, src/esx/esx_driver.c, src/libvirt.c,
src/qemu/qemu_migration.c, src/vmx/vmx.c, src/xen/xend_internal.c,
tests/viruritest.c: s/xmlFreeURI/virURIFree/
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When a client which started non-p2p migration dies in a bad time, the
source libvirtd never clears the migration job and almost nothing can be
done with the domain without restarting the daemon. This patch makes use
of connection close callbacks and ensures that migration job is properly
discarded when the client disconnects.
Destination daemon should not rely on the client or source daemon
(depending on the type of migration) to call Finish when migration
fails, because the client may crash before it can do so. The domain
prepared for incoming migration is set to be destroyed (and migration
job cleaned up) when connection with the client closes but this is not
enough. If the associated qemu process crashes after Prepare step and
the domain is cleaned up before the connection gets closed, autodestroy
is not called for the domain and migration jobs remains set. In case the
domain is defined on destination host (i.e., it is not completely
removed once destroyed) we keep the job set for ever. To fix this, we
register a cleanup callback which is responsible to clean migration-in
job when a domain dies anywhere between Prepare and Finish steps. Note
that we can't blindly clean any job when spotting EOF on monitor since
normally an API is running at that time.
This reverts commit 61f2b6ba5f and most of
commit d8916dc8e2, which effectively
brings back commit ef1065cf5a written by
Jim Fehlig:
The qemu migration speed default is 32MiB/s as defined in migration.c
/* Migration speed throttling */
static int64_t max_throttle = (32 << 20);
There's no need to throttle migration when targeting a file, so set
migration speed to unlimited prior to migration, and restore to libvirt
default value after migration.
Default units is MB for migrate_set_speed monitor command, so
(INT64_MAX / (1024 * 1024)) is used for unlimited migration speed.
This was reverted because migration to file could not be canceled and
even monitored since qemu was not processing any monitor commands until
the migration finished. This is now different as we make sure the
file descriptor we pass to qemu is able to properly report EAGAIN.
Recent qemu changes might have helped as well.
I tested managedsave with this patch in and indeed, it is 10x faster
while I can still monitor its progress.
A few times libvirt users manually setting mac addresses have
complained of a networking failure that ends up being due to a multicast
mac address being used for a guest interface. This patch prevents that
by logging an error and failing if a multicast mac address is
encountered in each of the three following cases:
1) domain xml <interface> mac address.
2) network xml bridge mac address.
3) network xml dhcp/host mac address.
There are several other places where a mac address can be input that
aren't controlled in this manner because failure to do so has no
consequences (e.g., if the address will be used to search through
existing interfaces for a match).
The RNG has been updated to add multiMacAddr and uniMacAddr along with
the existing macAddr, and macAddr was switched to uniMacAddr where
appropriate.
If an error was encountered parsing a dhcp host entry mac address or
name, parsing would continue and log a less descriptive error that
might make it more difficult to notice the true nature of the problem.
This patch returns immediately on logging the first error.
This patch is in response to:
https://bugzilla.redhat.com/show_bug.cgi?id=798467
If a guest's tap device is created using the same MAC address the
guest uses for its own network card (which connects to the tap
device), the Linux kernel will log the following message and traffic
will not pass:
kernel: vnet9: received packet with own address as source address
This patch disallows MAC addresses with a first byte of 0xFE, but only in
the case that the MAC address is used for a guest interface that's
connected by way of a standard tap device. (In other words, the
validation is done at runtime at the same place the MAC address is
modified for the tap device, rather than when mac address is parsed,
the idea being that it is then we know for sure the address will be
problematic.)
Using inheritance, this patch cleans up the cpu_map.xml file and also
sorts all CPU features according to the feature and registry
values. Model features are sorted the same way as foeatures in the
specification.
Also few models that are related were organized together and parts of
the XML are marked with comments
If a guest is paused, we were silently ignoring the quiesce flag,
which results in unclean snapshots, contrary to the intent of the
flag. Since we can't quiesce without guest agent support, we should
instead fail if the guest is not running.
Meanwhile, if we attempt a quiesce command, but the guest agent
doesn't respond, and we time out, we may have left the command
pending on the guest's queue, and when the guest resumes parsing
commands, it will freeze even though our command is no longer
around to issue a thaw. To be safe, we must _always_ pair every
quiesce call with a counterpart thaw, even if the quiesce call
failed due to a timeout, so that if a guest wakes up and starts
processing a command backlog, it will not get stuck in a frozen
state.
* src/qemu/qemu_driver.c (qemuDomainSnapshotCreateDiskActive):
Always issue thaw after a quiesce, even if quiesce failed.
(qemuDomainSnapshotFSThaw): Add a parameter.
This patch fixes a NULL pointer check that was causing SegFault on
some specific configurations. It also reverts commit 59d0c9801c
that was checking for this value in one place.
A common coding pattern for changing blkio parameters is
1. virDomainGetBlkioParameters
2. change one or more params
3. virDomainSetBlkioParameters
For this to work, it must be possible to roundtrip through
the methods without error. Unfortunately virDomainGetBlkioParameters
will return "" for the deviceWeight parameter for guests by default,
which virDomainSetBlkioParameters will then reject as invalid.
This fixes the handling of "" to be a no-op, and also improves the
error message to tell you what was invalid
How to reproduce:
% valgrind -v --leak-check=full virsh migrate mig \
qemu+ssh://$dest/system --unsafe
== 8 bytes in 1 blocks are definitely lost in loss record 1 of 28
== at 0x4A04A28: calloc (vg_replace_malloc.c:467)
== by 0x3EB7115FB8: xdr_reference (in /lib64/libc-2.12.so)
== by 0x3EB7115F10: xdr_pointer (in /lib64/libc-2.12.so)
== by 0x4D1EA84: xdr_remote_string (remote_protocol.c:40)
== by 0x4D1EAD8: xdr_remote_domain_migrate_prepare3_ret (remote_protocol.c:4772)
== by 0x4D2FFD2: virNetMessageDecodePayload (virnetmessage.c:382)
== by 0x4D2789C: virNetClientProgramCall (virnetclientprogram.c:382)
== by 0x4D0707D: callWithFD (remote_driver.c:4549)
== by 0x4D070FB: call (remote_driver.c:4570)
== by 0x4D12AEE: remoteDomainMigratePrepare3 (remote_driver.c:4138)
== by 0x4CF7BE9: virDomainMigrateVersion3 (libvirt.c:4815)
== by 0x4CF9432: virDomainMigrate2 (libvirt.c:5454)
==
== LEAK SUMMARY:
== definitely lost: 8 bytes in 1 blocks
== indirectly lost: 0 bytes in 0 blocks
== possibly lost: 0 bytes in 0 blocks
== still reachable: 126,995 bytes in 1,343 blocks
== suppressed: 0 bytes in 0 blocks
This patch also fixes the leaks in remoteDomainMigratePrepare and
remoteDomainMigratePrepare2.
* src/libvirt.c (virStorageVolResize): correct comment typo according to
virStorageVolResizeFlags enum definition.
Signed-off-by: Alex Jia <ajia@redhat.com>
If no <interface> elements are included in an LXC guest XML
description, then the LXC guest will just see the host's
network interfaces. It is desirable to be able to hide the
host interfaces, without having to define any guest interfaces.
This patch introduces a new feature flag <privnet/> to allow
forcing of a private network namespace for LXC. In the future
I also anticipate that we will add <privuser/> to force a
private user ID namespace.
* src/conf/domain_conf.c, src/conf/domain_conf.h: Add support
for <privnet/> feature. Auto-set <privnet> if any <interface>
devices are defined
* src/lxc/lxc_container.c: Honour request for private network
namespace
Commit e457d5ef20 adds ability to pass the
default URI using the client configuration file. If the file is not
present, it still accesses the NULL config object causing a segfault.
Caught running "make check".
Wire up the domain graphics event notifications for SPICE. Adapted
from a RHEL-only patch written by Dan Berrange that used custom
__com.redhat_SPICE events - equivalent events are now available in
upstream QEMU (including a SPICE_CONNECTED event, which was missing in
the __COM.redhat_SPICE version).
* src/qemu/qemu_monitor_json.c: Wire up SPICE graphics events
Currently if the URI passed to virConnectOpen* is NULL, then we
- Look for LIBVIRT_DEFAULT_URI env var
- Probe for drivers
This changes it so that
- Look for LIBVIRT_DEFAULT_URI env var
- Look for 'uri_default' in $HOME/.libvirt/libvirt.conf
- Probe for drivers
numad is an user-level daemon that monitors NUMA topology and
processes resource consumption to facilitate good NUMA resource
alignment of applications/virtual machines to improve performance
and minimize cost of remote memory latencies. It provides a
pre-placement advisory interface, so significant processes can
be pre-bound to nodes with sufficient available resources.
More details: http://fedoraproject.org/wiki/Features/numad
"numad -w ncpus:memory_amount" is the advisory interface numad
provides currently.
This patch add the support by introducing a new XML attribute
for <vcpu>. e.g.
<vcpu placement="auto">4</vcpu>
<vcpu placement="static" cpuset="1-10^6">4</vcpu>
The returned advisory nodeset from numad will be printed
in domain's dumped XML. e.g.
<vcpu placement="auto" cpuset="1-10^6">4</vcpu>
If placement is "auto", the number of vcpus and the current
memory amount specified in domain XML will be used for numad
command line (numad uses MB for memory amount):
numad -w $num_of_vcpus:$current_memory_amount / 1024
The advisory nodeset returned from numad will be used to set
domain process CPU affinity then. (e.g. qemuProcessInitCpuAffinity).
If the user specifies both CPU affinity policy (e.g.
(<vcpu cpuset="1-10,^7,^8">4</vcpu>) and placement == "auto"
the specified CPU affinity will be overridden.
Only QEMU/KVM drivers support it now.
See docs update in patch for more details.
With current code, we pass true iff domain is cold booting. However,
if disk is inaccessible and startupPolicy for that disk is set to
'requisite' we have to fail iff cold booting.
AMD Bulldozer (or Opteron_G4 as called in QEMU) was added to the list
of cpu models, flags were taken from upstream qemu cpu specifications
and should be sorted by bit values (or first occurence in the feature
specification part of cpu_map.xml).
Based on QEMU upstream commit 885bb0369a4f0abe2c0185178f3cb347cb02cdf1.
Even though we say in documentation setting (tls-)port to -1 is legacy
compat style for enabling autoport, we're roughly doing this for VNC.
However, in case of SPICE auto enable autoport iff both port & tlsPort
are equal -1 as documentation says autoport plays with both.
In qemuDomainDetachNetDevice, detach was being used before it had been
validated. If no matching device was found, this resulted in a
dereference of a NULL pointer.
This behavior was a regression introduced in commit
cf90342be0, so it has not been a part of
any official libvirt release.
When host-model and host-passthrouh CPU modes were introduced, qemu
driver was properly modify to update guest CPU definition during
migration so that we use the right CPU at the destination. However,
similar treatment is needed for (managed)save and snapshots since they
need to save the exact CPU so that a domain can be properly restored.
To avoid repetition of such situation, all places that need live XML
share the code which generates it.
As a side effect, this patch fixes error reporting from
qemuDomainSnapshotWriteMetadata().
Thanks to cgroups, providing user vs. system time of the overall
guest is easy to add to our existing API.
* include/libvirt/libvirt.h.in (VIR_DOMAIN_CPU_STATS_USERTIME)
(VIR_DOMAIN_CPU_STATS_SYSTEMTIME): New constants.
* src/util/virtypedparam.h (virTypedParameterArrayValidate)
(virTypedParameterAssign): Enforce checking the result.
* src/qemu/qemu_driver.c (qemuDomainGetPercpuStats): Fix offender.
(qemuDomainGetTotalcpuStats): Implement new parameters.
* tools/virsh.c (cmdCPUStats): Tweak output accordingly.
As documented in linux.git/Documentation/cgroups/cpuacct.txt,
cpuacct.stat returns user and system time in ticks (the same
unit used in times(2)). It would be a bit nicer if it were like
getrusage(2) and reported timeval contents, or like cpuacct.usage
and in nanoseconds, but we can't be picky.
* src/util/cgroup.h (virCgroupGetCpuacctStat): New function.
* src/util/cgroup.c (virCgroupGetCpuacctStat): Implement it.
(virCgroupGetValueStr): Allow for multi-line files.
* src/libvirt_private.syms (cgroup.h): Export it.
If there is a disk file with a comma in the name, QEmu expects a double
comma instead of a single one (e.g., the file "virtual,disk.img" needs
to be specified as "virtual,,disk.img" in QEmu's command line). This
patch fixes libvirt to work with that feature. Fix RHBZ #801036.
Based on an initial patch by Crístian Viana.
* src/util/buf.h (virBufferEscape): Alter signature.
* src/util/buf.c (virBufferEscape): Add parameter.
(virBufferEscapeSexpr): Fix caller.
* src/qemu/qemu_command.c (qemuBuildRBDString): Likewise. Also
escape commas in file names.
(qemuBuildDriveStr): Escape commas in file names.
* docs/schemas/basictypes.rng (absFilePath): Relax RNG to allow
commas in input file names.
* tests/qemuxml2argvdata/*-disk-drive-network-sheepdog.*: Update
test.
Signed-off-by: Eric Blake <eblake@redhat.com>
