QEMU has long accepted many different values for boolean properties, but
set accepted has been different depending on which QEMU parser you hit.
The on|off values were supported by all QEMU parsers. The yes|no, y|n,
true|false values were only partially supported:
https://lists.gnu.org/archive/html/qemu-devel/2020-11/msg01012.html
Thus we should standardize on on|off everywhere since that is most
widely supported in QEMU.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
QEMU has long accepted many different values for boolean properties, but
set accepted has been different depending on which QEMU parser you hit.
The on|off values were supported by all QEMU parsers. The yes|no, y|n,
true|false values were only partially supported:
https://lists.gnu.org/archive/html/qemu-devel/2020-11/msg01012.html
Thus we should standardize on on|off everywhere since that is most
widely supported in QEMU.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The preferred syntax for boolean options is to set the value "on" or
"off". QEMU 7.1.0 will deprecate the short format we currently use.
The long format has been supported with -vnc since the change to use
QemuOpts in 2.2.0, so we check based on the new capability flag.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This was introduced in QEMU 2.2.0, and is visible by -vnc appearing in
the "query-command-line-options" data.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When virDomainGetFSInfo() is called over a QEMU/KVM domain it
results into calling of 'guest-get-fsinfo' guest agent command to
which it replies with info on guest (mounted) filesystems. When
filling return structure we also try to do basic lookup and
translate guest agent provided disk address into disk target (as
seen in domain XML). This can of course fail - guest can have
variety of disks not recorded in domain XML (iSCSI, scsi_debug,
NFS to name a few). If that's the case, a debug message is logged
and no disk target is added into the return structure.
However, due to the way our code is written the caller is led to
believe that the target was added into the structure. This may
lead to a situation where the array of disk targets (strings)
contains NULL. But our RPC structure says the array contains only
non-NULL strings. This results in somewhat 'cryptic' (at least to
users) error message:
error: Unable to get filesystem information
error: Unable to encode message payload
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1919783
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After previous commit, the freeing of @info_ret inside of
virDomainFSInfoFormat() looks like this:
for () {
if (info_ret)
virDomainFSInfoFree(info_ret[i]);
}
It is needless to compare @info_ret against NULL in each
iteration. We can switch the order and do the comparison first
followed by the loop.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When qemuDomainGetFSInfo() is called it calls
qemuDomainGetFSInfoAgent() which executes 'guest-get-fsinfo'
guest agent command, parses returned JSON and returns an array of
qemuAgentFSInfo structures (well, pointers to those structs).
Then it grabs a domain job and tries to do some matching of guest
returned info against domain definition. This matching is done in
virDomainFSInfoFormat() which also frees the array of
qemuAgentFSInfo structures allocated earlier.
But this is not just. If acquiring the domain job fails (or
domain activeness check executed right after that fails) then
virDomainFSInfoFormat() is not called, leaking the array of
structs.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As the very first thing, this function checks whether the number
of items inside @agentinfo array is not negative. This is
redundant as the only caller - qemuDomainGetFSInfo() already
checked for that and would not even call this function if that
was the case.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The preferred syntax for boolean options is to set the value "on" or
"off". QEMU 7.1.0 will deprecate the short format we currently use.
The long format has been supported with -spice since at least 1.5.3,
so we don't need to check for it.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The preferred syntax for boolean options is to set the value "on" or
"off". QEMU 7.1.0 will deprecate the short format we currently use.
The long format has been supported with -chardev since at least 1.5.3,
so we don't need to check for it.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The -2 value is misleading because if 'qemuAgentFSFreeze' fails it
doesn't necessarily mean that the command was sent to the agent.
Since callers don't care about the -2 value specifically, remove it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
If we didn't freeze any filesystems we should not even attempt thawing
them. Additionally 'guest-fsfreeze-freeze' fails if the filesystems are
already frozen, where thawing them may break users data integrity if
they used VIR_DOMAIN_SNAPSHOT_CREATE_QUIESCE accidentally after an
explicit virDomainFSFreeze and the next snapshot without that flag would
be taken with already thawed filesystems.
This effectively reverts 7c736bab06 .
Libvirt nowadays checks whether the guest agent is connected and pings
it before issuing an command so it's very unlikely that we'd end up in a
situation where qemuSnapshotCreateActiveExternal froze filesystems and
didn't thaw them.
Additionally we now discourage the use of
VIR_DOMAIN_SNAPSHOT_CREATE_QUIESCE since users have better control if
they freeze the FS themselves.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The flag creates additional points of failure which are hard to recover
from, such as when thawing of the filesystems fails after an otherwise
successful snapshot.
Encourage use of explicit virDomainFSFreeze/virDomainFSThaw.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Use scripts/test-wrap-argv.py to rewrap the output files so that any
further changes don't introduce churn since we are rewrapping the output
automatically now.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The suffix is used for output files of 'storagevolxml2argvtest.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Use g_autofree for 'dom_xml' to free it on some of the (unlikely) code
paths jumping to cleanup prior to the deallocation which is done right
after it's not needed any more since it's a big string.
Noticed when running under valgrind:
==2204780== 8,192 bytes in 1 blocks are definitely lost in loss record 2,539 of 2,551
==2204780== at 0x483BCE8: realloc (vg_replace_malloc.c:834)
==2204780== by 0x4D890DF: g_realloc (in /usr/lib64/libglib-2.0.so.0.6600.4)
==2204780== by 0x4DA3AF0: g_string_append_vprintf (in /usr/lib64/libglib-2.0.so.0.6600.4)
==2204780== by 0x4917293: virBufferAsprintf (virbuffer.c:307)
==2204780== by 0x49B0B75: virDomainChrDefFormat (domain_conf.c:26109)
==2204780== by 0x49E25EF: virDomainDefFormatInternalSetRootName (domain_conf.c:28956)
==2204780== by 0x15F81D24: qemuDomainDefFormatBufInternal (qemu_domain.c:6204)
==2204780== by 0x15F8270D: qemuDomainDefFormatXMLInternal (qemu_domain.c:6229)
==2204780== by 0x15F8270D: qemuDomainDefFormatLive (qemu_domain.c:6279)
==2204780== by 0x15FD8100: qemuMigrationSrcBeginPhase (qemu_migration.c:2395)
==2204780== by 0x15FE0F0D: qemuMigrationSrcPerformPeer2Peer3 (qemu_migration.c:4640)
==2204780== by 0x15FE0F0D: qemuMigrationSrcPerformPeer2Peer (qemu_migration.c:5093)
==2204780== by 0x15FE0F0D: qemuMigrationSrcPerformJob (qemu_migration.c:5168)
==2204780== by 0x15FE280E: qemuMigrationSrcPerform (qemu_migration.c:5372)
==2204780== by 0x15F9BA3D: qemuDomainMigratePerform3Params (qemu_driver.c:11841)
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
macOS builder capacity on Cirrus CI is quite limited, and so we
can't afford to keep the old build job around after adding the
new one like we do for FreeBSD.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While pkgng on FreeBSD updates the package list automatically
when it's run, homebrew on macOS doesn't do the same thing, which
can result in stale packages being installed. Explicitly call
'brew update' before 'brew install' to avoid that scenario.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In one of my previous commits I've made an attempt to restore the
noqueue qdisc on a TAP corresponding to domain's <interface/> if
QoS is cleared out. The commit consisted of two almost identical
hunks. In both the pointer is dereferenced. But in one of them,
the pointer to new bandwidth can't be NULL while in the other it
can leading to a crash.
Fixes: d53b092353
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1919619
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The FreeBSD 12.1 image on Cirrus CI is currently broken, but
that's okay because a FreeBSD 12.2 image is also available and
we'd rather build on the more up-to-date target anyway.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
After the recent fixes, it's now confirmed to work.
https://gitlab.com/libvirt/libvirt/-/issues/121
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Previous patches have converted VIR_FREE to g_free in functions with
names ending in Free() and Dispose(), but there are a few similar
functions with names that don't fit that pattern, but server the same
purpose (and thus can survive the same conversion). in particular
*Free*(), and *Unref().
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Invocations of the macro ESX_VI__TEMPLATE__FREE() will free the main
object (referenced as "item") that's pointing to all the things being
VIR_FREEd in the body, so it is safe for all the pointers in item to
just be g_freed rather that VIR_FREEd.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The root directory can be provided by user (or a temporary one is
generated) and is always formatted into connection URI for both
secret driver and QEMU driver, like this:
qemu:///embed?root=$root
But if it so happens that there is an URI unfriendly character in
root directory or path to it (say a space) then invalid URI is
formatted which results in unexpected results. We can trust
g_dir_make_tmp() to generate valid URI but we can't trust user.
Escape user provided root directory. Always.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1920400
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
More often than not I find myself debugging in the containers which
means that I need to have root inside, but without manually tweaking
the Makefile each time the execution would simply fail thanks to the
uid/gid mapping we do. What if we expose the CI_USER_LOGIN variable, so
that when needed, the root can be simply passed with this variable and
voila - you have a root shell inside the container with CWD=~root.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The purpose of this script was to prepare a customized environment in
the container, but was actually never used and it required the usage of
sudo to switch the environment from root's context to a regular user's
one.
The thing is that once someone needs a custom script they would very
likely to debug something and would also benefit from root privileges
in general, so the usage of 'sudo' in such case was a bit cumbersome.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The prepare.sh script isn't currently used and forces us to make use
of sudo to switch the user inside the container from root to $USER
which created a problem on our Debian Slim-based containers which don't
have the 'sudo' package installed.
This patch removes the sudo invocation and instead runs the CMD
directly with podman.
Summary of the changes:
- move the corresponding env variables which we need to be set in the
environment from the sudo invocation to the podman invocation
- pass --workdir to podman to retain the original behaviour we had with
sudo spawning a login shell.
- MESON_OPTS env variable doesn't need to propagated to the execution
environment anymore (like we had to do with sudo), because it's
defined in the Dockerfile
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This is necessary for the follow up patch, because the default
entrypoint for a Dockerfile is exec.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Debian sid is currently broken on ppc64le, so move the build to
Debian 10; do the opposite for the aarch64 and mips64el builds to
try and restore the 10/sid balance.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Whether a container build job is considered required depends on
whether the corresponding cross-build job exists, and in a few
cases the two got out of sync over time.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Keep them ordered by architecture, the same way the corresponding
container jobs are, to make it easier to jump between the two
sections and compare them.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This API allows fetching a list of informational messages recorded
against the domain. This provides a way to give information about
tainting of the guest due to undesirable actions/configs, as well
as provide details of deprecated features.
The output of this API is explicitly targetted at humans, not
machines, so it is inappropriate to attempt to pattern match on
the strings and take action off them, not least because the messages
are marked for translation.
Should there be a demand for machine targetted information, this
would have to be addressed via a new API, and is not planned at
this point in time.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
These messages are only valid while the domain is running.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
These messages will be stored in the live status XML.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
