This is an adaptation of the libvirtd manpage.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is an adaptation of the libvirtd manpage.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is an adaptation of the libvirtd manpage.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is an adaptation of the libvirtd manpage.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is an adaptation of the libvirtd manpage.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is an adaptation of the libvirtd manpage.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is an adaptation of the libvirtd manpage.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is an adaptation of the libvirtd manpage.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This group will be distinct from the per-driver modular daemon mapages.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Subsitute in the current version so the example always reflect today's
version of reality.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In the past, the MTU of libvirt virtual network bridge devices was
implicitly set by setting the MTU of the "dummy tap device" (which was
being added in order to force a particular MAC address from the
bridge). But the dummy tap device was removed in commit ee6c936fbb
(libvirt-6.8.0), and so the mtu setting in the network is ignored.
The solution is, of course, to explicitly set the bridge device MTU
when it is created.
Note that any guest interface with a larger MTU that is attached will
cause the bridge to (temporarily) assume the larger MTU, but it will
revert to the bridge's own MTU when that device is deleted (this is
not due to anything libvirt does; it's just how Linux host bridges
work).
Fixes: ee6c936fbb
Resolves: https://bugzilla.redhat.com/1913561
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
managed='no' on an <interface> allows an unprivileged libvirt to use a
pre-created tap/macvtap device that libvirt has permission to
open/read/write, but no permission to modify (i.e. set the MTU or MAC
address). But when the XML had an <mtu size='blah'/> setting (which
was put there in order to tell the *guest* OS what MTU to set for the
emulated device at the other end of the tap) we were attempting to set
the MTU of the tap device on the host, paying no attention to the
setting of 'managed'. That would of course end in failure.
This patch only sets the MTU if managed='no' is *not* set (so, if it
is 'yes', or just not set at all).
Note that MTU of the tap is also set when connecting the tap to a
bridge device, but managed='no' is only allowed for <interface
type='ethernet'>, which would never attach to a bridge anyway, so we
don't need the check there.
Resolves: https://bugzilla.redhat.com/1905929
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The error message printed by scripts/group-qemu-caps.py and
scripts/test-wrap-argv.py doesn't actually print the filename of the
offending file:
Incorrect line wrapping in $file
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Extract common code as helper function virNetlinkTalk, then simplify
the functions virNetlink[DumpLink|NewLink|DelLink|GetNeighbor].
Signed-off-by: Shi Lei <shi_lei@massclouds.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Introduce a macro NETLINK_MSG_APPEND to wrap nlmsg_append and
simplify code. Remove those labels 'buffer_too_small', since they
are now useless.
Signed-off-by: Shi Lei <shi_lei@massclouds.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Move macros NETLINK_MSG_[NEST_START|NEST_END|PUT] from .h into .c;
within these macros, replace 'goto' with reporting error and returning;
simplify virNetlinkDumpLink and virNetlinkDelLink by using NETLINK_MSG_PUT.
Signed-off-by: Shi Lei <shi_lei@massclouds.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
NLM_F_CREATE and NLM_F_EXCL are invalid for RTM_DELLINK,
so remove them.
Signed-off-by: Shi Lei <shi_lei@massclouds.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Thanks to the 'rules' syntax, this will translate to
'allow_failure:true' and let the job fail but will not affect the rest
of the pipeline.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
'rules' syntax replaces the only/except syntax with which it is
mutually exclusive. In some cases the 'rules' syntax is more readable
than the 'only/except' equivalent, in some cases it is not.
The idea behind this conversion is to introduce an explicit env variable
controlling the 'allow_failure' attribute which would then be attached
to a broken build job which would in turn result in a soft failure.
Such behaviour is not possible to achieve with the older 'only/except'
syntax.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
'extends' is slightly more readable and definitely more flexible in
terms of allowing includes of templates.
The main reason for this patch though is that the next patch converts
the 'only/except' syntax to the new (preferable) 'rules' syntax.
Variable anchors are still kept intact because the use case there is
different from regular template anchors.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Commit 154df5840d added support for <metadata_cache> as property of a
<disk>. Since the same parser is used to parse the XML used with
virDomainBlockCopy it starts the copy job with the appropriate cache
configured, but the <mirror> doesn't show this configuration nor it's
preserved if libvirtd is restarted during the mirror.
Add parsing, formatting and tests for <metadata_cache> for a <mirror>.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Depending on the memballoon model, the corresponding QOM node
will have a different type and we need to account for this
when searching for it in the QOM tree.
https://bugzilla.redhat.com/show_bug.cgi?id=1911786
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit v6.10.0-103-g198c1eb6b4 fixed this issue.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Currently translated at 10.9% (1145 of 10451 strings)
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/fi/
Co-authored-by: Jan Kuparinen <copper_fin@hotmail.com>
Signed-off-by: Jan Kuparinen <copper_fin@hotmail.com>
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/
Co-authored-by: Weblate <noreply@weblate.org>
Signed-off-by: Fedora Weblate Translation <i18n@lists.fedoraproject.org>
Currently translated at 23.4% (2446 of 10440 strings)
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/pl/
Co-authored-by: Piotr Drąg <piotrdrag@gmail.com>
Signed-off-by: Piotr Drąg <piotrdrag@gmail.com>
When a block job is terminated we should clear the 'mirrorState' and
'mirrorJob' variables so that stale values are not present prior to a
new job.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the per-job state to determine when the non-shared-storage mirror is
complete rather than the per-disk definition one. The qemuBlockJobData
is a newer approach and is always cleared after the blockjob is
terminated while the 'mirrorState' variable in the definition of the
disk may be left over. In such case the disk mirror would be considered
complete prematurely.
https://bugzilla.redhat.com/show_bug.cgi?id=1889131
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In this refresh the PIP variable is renamed to PIP3 and the
PYPI_PKGS variable disappears since we (currently) don't have
any need for it.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The "libvirt-" prefix was removed from hostnames in libvirt-ci.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
KubeVirt uses Libvirt to manage virtual machines run in
containers. Mention this in our apps page.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
So far we assumed that any vhostuser interface is plugged into an
OVS bridge and thus 'ovs-vsctl' exists. But this is not always
true. In testing scenarios it is possible to create a vhostuser
interface with this tool dpdk-testpmd (part of dpdk RPM) which
creates/connects to UNIX socket needed for vhostuser. Of course,
since there is no OVS then there is no interface name in which
case virNetDevOpenvswitchGetVhostuserIfname() should return 0.
The rest of APIs that assume OVS are not 'fixed' because we still
want them to fail (e.g. getting statistics, plugging interface
into an OVS bridge, unplugging it from an OVS bridge, ...).
The only API that is fixed is
virNetDevOpenvswitchGetVhostuserIfname() because it is called
explicitly when starting a guest (and callers are okay if no name
was found).
The other way to fix this bug seems to be to simply require
'ovs-vsctl' on spec file level, but that is too heavy gun given
that vhostuser is used by a small set of our users (assumption
made on requirements for vhostuser). Also, this way would drag in
yet another dependency for all users (even those who want minimal
libvirt).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1913156
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Using virtio-blk with SEV on host kernels prior to 5.1 didn't work
because of SWIOTLB limitations and the way virtio has to use it over
DMA-API for SEV (see [1] for detailed info). That is no longer true, so
reword the kbase article accordingly.
For reference, these are the upstream kernel commits lifting the
virtio-blk limitation:
abe420bfae528c92bd8cc5ecb62dc95672b1fd6f
492366f7b4237257ef50ca9c431a6a0d50225aca
133d624b1cee16906134e92d5befb843b58bcf31
e6d6dd6c875eb3c9b69bb640419405726e6e0bbe
fd1068e1860e44aaaa337b516df4518d1ce98da1
[1] https://lore.kernel.org/linux-block/20190110134433.15672-1-joro@8bytes.org/
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Starting from libvirt-6.6 the releases are done by Jirka. Add a formal
statement from DV handing over the signature.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Keep the more important stuff outlining how to get to the sources first
since the 'signatures' section will be extended.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The output of cpuid depends on the logical processor id the process
runs on, as reflected by the "local apic id" present in cpuid leaves
(eax=1,ebx=0), (eax=11,ebx=0), and (eax=11,ebx=1). This produces
arbitrary changes in the output files that complicate comparisons.
This patch masks the occurences of the local apic id with 0x00, so
that two consecutive runs of "./cpu-data.py gather" produce identical
results.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Now that this function can be called regardless of interface type (and
whether or not we have a conn for the network driver), let's actually
call it for all interface types. This will assure that we re-connect
any disconnected bridge devices for <interface type='bridge'> as
mentioned in https://bugzilla.redhat.com/show_bug.cgi?id=1730084#c26
(until now we've only been reconnecting bridge devices for <interface
type='network'>)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The bridge reattach functionality in this function should be called
for interface types other than just type='network', so make it
callable for any type - it just becomes a NOP for types where no
action is needed.
In the case of <interface type='network'> we need to create a port in
the network driver, and for both type='network and type='bridge' we
need to reattach the bridge device (note that
virDomainNetGetActualBridgeName() gets the bridge name from the
appropriate (and different!) location for either type of interface).
All other interfaces currently require no action.
modifying callers of this function to actually call it for all
interface types is in the next patch. For now the behavior should be
identical pre and post-patch.
(NB: the conn argument can now legitimately be NULL, so we need to
change the ATTRIBUTE_NONNULL() directive for the function's
declaration - I noticed when making this change that argument 3 (the
NetDefPtr) could never be NULL, so I added ATTRIBUTE_NONNULL(3) while
removing ATTRIBUTE_NONNULL(1) (conn)).
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>Reviewed-by: Michal Privoznik <mprivozn@redhat.com>#Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
dnsmasq usually prints out a version string like this:
Dnsmasq version 2.82 [...]
but a user reported that the build of dnsmasq included with pihole has
a version string like this:
Dnsmasq version pi-hole-2.81 [...]
We parse the dnsmasq version number to figure out if the dnsmasq
binary supports certain features. Since we expect the version number
(and it must be only numbers!) to start on the first non-space after
the string "Dnsmasq version", we fail to parse this format of the
version string.
Rather than spending a bunch of time trying to get pihole to change
that, we can just make our parsing more permissive - after searching
for "Dnsmasq version", we'll skip ahead to the first decimal digit,
rather than just the first non-space.
(NB: The features we're checking for purely by looking at version
number have been in all releases of dnsmasq since at least 2012, so we
could actually just remove the reading of the version number
completely. However it's possible (although *highly* unlikely)
that some new feature would be added to dnsmasq in the future and we
would need to add that code back.)
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/29
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This function skips over the beginning of a string until it reaches a
decimal digit (0-9) or the NULL at the end of the string. The original
pointer is modified in place (similar to virSkipSpaces()).
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
